FRX300basic CNC Milling machine complete with: * Electrospindle with tool change of 60.000 rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm. *Group of n.2 adjustable static clamps Pneumatic clamps for machining plates with ma. length of 250 mm with variable centre-to-centre distances complete with opening-closing valves and a plan depressurized(milling on one side only) * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
FRX300professional CNC Milling machine complete with: * Electrospindle with tool change of 60.000 rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm *Mechanical and electrical pre arrangement for continuous feeding plate * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
FRX300master CNC Milling machine complete with: * Electrospindle with tool change of 60.000 rdp Pressurized, with pneumatic tool cone change and ceramic bearings. Grippers ma. 6 mm *Mechanical and electrical pre arrangement for continuous feeding plate *Electrical pre arrangment for subsequent fitting 4-5th ais for FRX300 * Liquid cooling with separate cryogenic unit, controlled by the CNC * Tool Change: Automatic with 6 tool positions + 1 for feeler * Tool Lubrication: Micro-atomization system * Tangential diamond milling * CNC numerical control * PC * CAM CAM Rhino NC Software for 2.5 D flat machining and with fan (Rhinoceros license not included from. vers.4.0) Power 220/230V 50/60Hz single phase (required minimum 6 bar air compressor with dryer) Tools are ecluded
FRX300 MILLING FRESATRICE MACHINE PER LA FOR CREAZIONE THE CREATION DI MODELLI OF GOLDSMITHS PER OREFICERIA MODELS MACHINE EQUIPMENTS: FRX300 basic FRX300 professional 292830L PC with operative system and key-board for FRX 300 OPTIONALS: 340451 3D Software for FRX300 CAD-CAM program license for importing files from major commercial Software programs. (Rhinoceros license not included) 685501L Mandrino motorizzato 4 e 5 asse per FRX300 340175 Software CAM Rhino NC per 5 assi (Licenza di Rhinoceros esclusa) TOOLS: 685515L Set suggested tools for first installation FRX300 685510L ISO10 Cutter cone kit complete with elastic pincer & joint (diameter 3 or 6 mm to be specified) 685511L 685512L Carbide-tipped flat milling cutter, diam. from 0.4 to 1.2 mm (specify the desired diameter). Carbide-tipped radius cutter, diam. from 0.4 to 1.2 mm (specify the desired diameter). FRX300 master 685513L Fan, diam. 50 mm, diamond insert (specify the desired angle). 685514L HYDRO tool with diamond insert (specify the desired angle and diameter). OPTIONAL EQUIPMENT (to be ordered together with the machine one choice): 685503L Group of n. 2 adjustable static clamps Pneumatic clamps for machining plates with ma. length of 250 mm with variable centre-to-centre distances complete with opening-closing valves and a depressurized plan (milling on one side only). 685504L 685500L Continuous feeding plate with tension system and suction plate for FRX300. For plates with ma. width 80 mm. (milling on one side only). Continuous feeding plate with tension system, turnebole device and suction plate for FRX300, for plates with ma. width 80 mm. (milling on both sides of the plate) TRAINING Course on the use of FRX300 + Software CAM Rhino NC 2,5D plan processing and with fan (minimum of 5 days recommended). Travel epenses, room and board engineer not included. Course on the use of FRX300 + Software CAM Rhino NC 2,5D plan processing and with fan and Software CAM Rhino NC 4 and 5 ais (minimum of 10 days recommended). Travel epenses, room and board engineer not included.
DATI TECNICI TECHNICAL DATA FRX300 Area di lavoro - asse X X aes working area 300 mm Area di lavoro asse Y Y aes working area 350 mm Area di lavoro asse Z Z aes working area 200 mm Velocità asse X Y Z X- Y -Z ais speed 17000mm/min Precisione asse X Y Z X- Y -Z ais precision +/- 0,01 mm Risoluzione asse X Y Z X- Y -Z ais resolution 2 micron Cambio utensile Changing tool automatic Dimensions Dimensioni 850*14202003 mm Net weight Peso netto 600 Kg * consolle esclusa/ecluded
FEEDING PLATE
4 and 5 ROTATING AXIS FAN PRE-ARRANGMENT FOR CONTINUOUS FEEDING PLATE
GROUP OF N. 2 ADJUSTABLE CLAMPS
APPLICATIONS
sisma spa schio Italy info@sisma.com www.sisma.com