GT-Series UHF TV Transmitter
GT-Series UHF TV Transmitter Features High efficiency Leading-edge LDMOS in Power Amplifier (PA) device Standard PA type : Up to 3% for COFDM and ATSC Doherty PA type : Up to 38% for COFDM Up to 4% for ATSC High power with very small footprint One of the most compact footprints in the same power output model in the industry - High-power (up to 9.9kW) : W 570 x D 000 x H 950 mm - Medium-power (up to 3.kW) : W 570 x D 800 x H 950 mm - Low-power (up to 730W) : W 570 x D 800 x H 8 mm EIA rack-mount sized unit / sub-chassis Downsized and lightened liquid-cooled PA by adopting new-structure cold plate Flexible system configuration Since starting the production of analog television transmitters in 95, Toshiba has provided high-quality and high-reliability in transmission networks all over the world for 0 years. The technology of Toshiba has taken the lead in the broadcasting industry in making a through shift to the digital broadcasting.toshiba is now unveiling the brand-new GT-Series UHF digital TV transmitters that offer high-quality, high-performance, high-reliability, and superior cost-performance to customers worldwide. The GT-Series UHF solid-state digital transmitter has been designed for multi digital TV standards (DVB-T, DVB-T/H, ISDB-T/Tb, ATSC, ATSC-M/H, DTMB and CMMB). By adopting a leading-edge LDMOS technology and a new downsizing feature, GT-Series has achieved up to 5% reduction in footprint, more than 5 points of improved efficiency, and up to 00% increase in power output by a rack, compared to the existing devices. Multi digital broadcasting standards; DVB-T, DVB-T/H, ISDB-T/Tb, ATSC, ATSC-M/H, DTMB/CMMB UHF full band from 470 MHz to 8 MHz Low-cost and scalable system architecture 3 FET blocks and 3 PS blocks mounted in one PA plate EX-exchange, power distribution and TX-Monitor functions in one Control Unit (CU) Higher power output system available by adding racks Various systems such as hot standby, dual-tx, N+ systems Various options; adaptive compensation, touch panel, etc. Easy maintenance Easily removable PA plate Hot-swappable & Plug-in PA plate with built-in power supply Exchangeable FET block and PS block Downsized liquid-cooling system and reduced exchange cost of coolant by closed-circuit Pump replacement available during operation by using dual cooling pump Easy operation Easy operation by CU Monitoring / Control available by external PC (Option) connected to Ethernet or touch-screen (Option) Remote control and monitoring via SNMP Easy installation GT-Series has three models of product lineups; High-power model (Liquid-cooled)/Medium-power model (Air-cooled)/Low-power model (Air-cooled), depending on system requirements. The High-power model achieves up to 9.9kW(before bandpass filter) power output by one rack, and can output higher power by combining two or more racks. High/Medium-power model : 3-phase AC400V ± 5% and 3-phase AC00V ± 5% without AVR Low-power model: single phase AC00V 5% without AVR Easy access to each interface Air-cooled transmitter installable to general-purpose EIA rack Units in GT-Series are designed in EIA rack-mount size. Especially, in Air-cooled models, the installation process is very simple because all the components can be mounted in a general-purpose EIA rack. Reliability Automatic restart within 5 seconds after recovery from blackout Normal operation with VSWR up to.3 Independent drain connectors for PA plate Built-in GPS receiver for SFN (Option)
Specifications Common data for GT-Series High-power(Liquid-cooled) Medium-power(Air-cooled) Low-power(Air-cooled) Model 470 MHz to 8 MHz(UHF) Frequency range Power output (after bandpass filter).0kw to 9.4kW AC line voltage (Contact us for details).0kw to 3.0kW 0W to 00W 3 phase 4 wires, 400 V ±5% 3 phase 3 or 4 wires, 00 V ±5% Line frequency phase wires, 00 V ±5% 50/0Hz ± 5% Max. installation altitude 500m above sea level Indoor temperature range 0 to +45 Outdoor temperature range -0 to +45 or -30 to +40 Permissible relative humidity 95%, without condensation 50 Ω with VSWR.3 RF load impedance Power output stability ±0.5dB or better Frequency stability Within±00Hz Internal ref Spurious Less than -0dBc/0mw Specifications of each standards Standard DVB-T/H DVB-T ISDB-T/Tb ATSC/M/H DTMB CMMB Input 4 x ASI x ASI x IP (op. x IP) x ASI x SMPTE30 (op. x ASI) x ASI x ASI /7/8 MHz 5//7/8 MHz /7/8 MHz MHz 8 MHz 8 MHz (op. -43dB) 7dB Channel bandwidth Shoulder level Signal to noise ratio High-power (Liquid-cooled) Model ( x : = Single Exciter, 4 = Dual Exciter, 7 = Dual TX ) Model Number GTU0xL GTU04xL GTU0xL GTUxL GTU8xL 4 8. kw.3 kw 3.5 kw. kw 9.9 kw.0 kw.0 kw 3.3 kw.3 kw 9.4 kw Dimensions (WxDxH) 570 x 000 x 950 mm Medium-power (Air-Cooled) Model ( x : = Single Exciter, 4 = Dual Exciter, 7 = Dual TX ) Model Number GTU03xF GTU0xF GTU09xF 3 9. kw. kw 3. kw.0 kw.0 kw 3.0 kw Dimensions (WxDxH) 570 x 800 x 950 mm Low-power (Air-Cooled) Model ( x : = Single Exciter, 4 = Dual Exciter, 7 = Dual TX ) GTU0ⅠxF GTU0ⅡxF GTU0ⅢxF GTU0ⅢxF Number of FET blocks 3 30W 50W 380W 730W 0W 0W 30W 00W Model Number Dimensions (WxDxH) 570 x 800 x 8 mm Please contact us for higher power requirement.
GT-Series UHF TV Transmitter System Block Diagram High-power (Liquid-cooled) model Medium-power (Air-cooled) model 3 sub-chassis installable in one rack 3 sub-chassis installable in one rack PA plates installable in one sub-chassis 3 PA plates installable in one sub-chassis 3 FET blocks (FETx) installable in one PA plate 3 FET blocks (FETx) installable in one PA plate Up to 9.9kW output power (before bandpass filter) Up to 3.kW output power (before bandpass filter) TX-control, EX-exchange, TX-monitor and 3way-distribution functions in one CU Low-power (Air-cooled) model Remote control / monitoring available via SNMP PA plates / PA plate in one sub-chassis Max. 3 FET blocks (FETx) installable in one PA plate 30-730W output power (before bandpass filter) 9 kw High-power model 500W Low-power model 3 kw Medium-power model Cooling System Liquid-cooling system Air-cooling system Consists of Liquid Drive System (LDS) and Heat Exchanger Cooled by internal fan mounted in PA plate Downsized LDS rack by closed-circuit Intake air from front of the rack and exhaust air from back Prevention of coolant degradation and reduction of exchange cost by closed-circuit Easy replacement of internal fan Pump replacement available during operation by using dual cooling pump Cooling System Block Diagram Water Flow in the Sub-chassis Cooling System Block Diagram Air Flow in the Sub-chassis Top view Top view Liquid Drive System Heat Exchanger Front view Front view Side view Front view
GT-Series UHF TV Transmitter High Efficiency Type (Option) High-power (Liquid-cooled) model with Doherty PA Outstanding efficiency Up to 38% (COFDM) Up to 4% (ATSC) Improved more than 5 points compared to our standard lineup Shared design Same sized components with the standard Liquid-cooled PA PA diagram (High efficiency type) Peak Amplifier Input Carrier Amplifier Applicable to every digital TV standard Output Medium-power (Air-cooled) model with Doherty PA Outstanding efficiency Up to 38% (COFDM) Up to 4% (ATSC) Improved more than 5 points compared to our standard lineup Shared design Same sized components with the standard Air-cooled PA Applicable to every digital TV standard Specifications (with Doherty PA) Common data for GT-Series Model Frequency range Power output (after bandpass filter) AC line voltage (Contact us for details) Line frequency Max. installation altitude Indoor temperature range Outdoor temperature range Permissible relative humidity RF load impedance Power output stability Frequency stability Spurious High-Power (Liquid-cooled) Medium-Power (Air-cooled) 470 MHz to 8 MHz (UHF) * 0.9 kw to 8.3 kw 0.9 kw to.9 kw 3 phase 4 wires, 400 V ±5% 3 phase 3 or 4 wires, 00 V ±5% 50/0Hz ± 5% 500m above sea level 0 to +45-0 to +45 or -30 to +40 95%, without condensation 50 Ω with VSWR.3 ±0.5dB or better Within±00Hz Internal ref Less than -0dBc/0mw * : Doherty PA is designed for single channel specified between the frequency range High-power (Liquid-cooled) Model ( x : = Single Exciter, 4 = Dual Exciter, 7 = Dual TX ) Model (Output power) GTN0xL GTN04xL GTN0xL GTNL 4.0 kw.0 kw 3.0 kw 5.9 kw 0.9 kw.8 kw.9 kw 5. kw Dimensions (W x D x H) 570 x 000 x 950 mm GTN8xL 8 8.7 kw 8.3 kw Medium-power (Air-Cooled) Model ( x : = Single Exciter, 4 = Dual Exciter, 7 = Dual TX ) Model (Output power) GTN0xF.0 kw 0.9 kw GTN03xF 3.5 kw.3 kw GTN04xF 4.0 kw.8 kw Dimensions (W x D x H) 570 x 800 x 950 mm GTN0xF 3.0 kw.9 kw
Community Solutions Company 7-34, Horikawa-cho, Saiwai-ku, Kawasaki -8585, Japan tel: +8-44-33-07 fax: +8-44-548-950 Email: gtx@po.toshiba.co.jp Attention : The contents herein may be changed without preliminary announcement. Copyright 04 Toshiba Corporation. This pamphlet uses FSC Certified Paper containing material from responsibly managed forests and 00% of the plant oils in the plant-based ink do not contain volatile organic solvents. The printing process did not produce an alkaline developing solution waste product as a waterless printing method was used. This method does not require dampening water, containing isopropyl alcohol, etc. BN000 04-3 5