2 Valves and hydrants for fire protection

A V k I n t e r n a t i o n a l A / S W a t e r w h e n y o u n e e d i t!

It s all about constraining fire with water! Safety comes first don t compromise on the quality. AVK ensures a reliable water supply. We offer quality products with long life that operate faultless even after a long period of standstill. When every second counts you can count on valves and hydrants from AVK. Valves and hydrants for fire protection 3

Excellence in qualit y throughout the process From design to finished product AVK s high design quality is based on thorough research of the customers needs. AVK products are manufactured in modern factories using high technology, computerised machining centres and robots to ensure precision and uniformity. The overall framework for quality from development to distribution is our extensive quality assurance system certified to ISO 9001. Optimum corrosion protection for maximum durability AVK products meet GSK requirements and conform to other international standards of effective corrosion protection. By virtue of our GSK membership (Gütegemeinschaft Schwerer Korrosionsschutz), our entire coating process complies with RAL-GZ 662 guidelines and is being monitored and approved twice a year by MPA-Hannover (Materialprüfanstalt), an independent testing institute. The step-by-step process with automatical monitoring of time, temperatures, coating thickness etc. ensures that each individual step is optimised to enhance the durability of the coating. AVK produces quality valves, hydrants and accessories for: Water Supply Sewage Treatment Gas Supply Fire Protection 4 Valves and hydrants for fire protection

AVK builds long life and good economy into your fire protection systems Fire plays a decisive role in our development as human beings. Under control it is invaluable, but out of control it can be devastating. Brave firemen risk their lives to extinguish fires. They rely fully on their equipment to function perfectly when needed. Therefore, it is crucial that the products installed are highly reliable, are easy to maintain and last a lifetime. AVK is a leading supplier of high quality hydrants and valves for fire protection and sprinkler systems. Our unique design and wide product range is based on the needs of customers worldwide. We offer a wide range of high quality valves and hydrants which, along with a series of accessories, build the optimum solution. The complete fire protection package complies with international standards and consists of hydrants, NRS post indicator valves, handwheel operated OS&Y gate valves, post and wall indicators all UL/ULC listed and FM approved. Furthermore, AVK holds VDS approval for NRS handwheel operated gate valves. AVK valves and fire hydrants are designed for high performance. Index Dry barrel hydrants series 27... 7 Wet barrel hydrants series 24... 17 Monitor hydrants series 84/60 and series 27... 27 Post indicators, wall indicators and post indicator valves... 33 The most used combinations... 43 Gate valves for indoor systems and sprinkler systems... 53 Gate valves series 06/35 and series 25/46... 55 The grooved systems end clamping systems series 06/37... 61 Butterfly valves series 75 and check valves series 41 and series 53... 65 Accessories for hydrants and valves... 81 Check valves for firehose cabinets... 94 Technical appendix... 97 Valves and hydrants for fire protection 5

Dr y barrel hydrants series 27 Dry barrel fire hydrants are primarily designed for frost areas, where the water main is located below ground frost zone. The series 27/00 dry barrel hydrant has two drain outlets located just above the water main level. The main valve disc is designed with the purpose of flushing the drain channels for soil and other impurities during opening. These impurities could lead to damage of the main valve disc. After turning the operation key 2 to 3 times the drain will stop flushing, and the barrel will be filled with water which will flow directly into the hoses and pumper hose or whatever is connected. Furthermore, when the hydrant is closed after service, the barrel will drain the water through the drain holes in the base. Therefore, it is important to make sure that the base is surrounded by gravel allowing the hydrant to drain and flush without washing off the soil. If not, this could result in under mining of the pavement. AVK dry barrel fire hydrants meet or exceed AWWA C-502 and are all UL/ULC listed and FM approved. The fire hydrants are designed for high performance, easy repair and minimum end user costs for labor and inventory. Series 27 are available in a modern or nostalgic designs. All AVK hydrants offer numerous features including: Hydrant serviceable under pressure Light-weight, inexpensive hydrant tools available Ductile iron nozzle section, barrel section and base High pressure rating - 17.2 bar (250 PSI) Electrostatically applied polyester coating 360 nozzle section rotation possible Removable nozzles secured with external stainless steel allen screw Travel stop nut in the nozzle section for additional safety Pumper nozzle can be changed from 4" - 41/2" Nozzles available in any thread configuration Traffic flange designed for easy repair Stainless steel traffic coupling designed for longer operational life and high corrosion resistance Extensions available in lengths from 6" - 60", bury depths 2' - 13' Patented AVK main valve design - 1 piece replaces up to 13 pieces Ductile iron core fully encapsulated with rubber Completely corrosion resistant (stop pins of stainless steel) 51/4" valve opening for high flow rating 360 all bronze drain channel Inlet shoe can be easily changed - available in most configurations (MJ, FL, PO) Optional extra: Internal trim for higher corrosion resistance Base with PE-inlet Monitor elbow Valves and hydrants for fire protection 7

AVK HIGH PRESSURE DRY BARREL HYDRANT 27/00 Working pressure >16 Bar with flanged inlet. Meets or exceeds AWWA C502 Removable outlets & hydrant seat,travel stop,traffic breakable flange,outlets 360 adjustable Min. 5 1/4" (133) valve bore & automatic bronze drain channels. Product description: For use with water and neutral liquids. Temperature range 10 C to +70 C. Standards: Excellent outlet flow. Serviceable under pressure. Max. rated working pressure 250 psi. Tests: Hydraulic test to UL, FM, AWWA C502 Rated working pressure (rwp): 250 PSI Body 2 x rwp = 500 PSI Seat 2 x rwp = 500 PSI Outlet Options: Pumper nozzle 4" NST (thread) 4 1/2" NST (thread) 4" BS 336 (thread) 5" Storz nozzle Hose nozzle 2 1/2" NST ( thread) 2 1/2" Instantaneuos coupling to BS 336 2 1/2" Global valve w. Instantaneuos coupling to BS 336 Approvals: UL - listed FM - approved Inlet options: Straight Shoe Duck Foot Bury Depth option: Bury depth: 500 to 3000 The designs, materials and specifications shown are subject to change without notice due our continuing prograe of product development. AVK SVMC 1/2 28.04.2013 MMH Previous version 28.04.2012 - MLJ

AVK HIGH PRESSURE DRY BARREL HYDRANT 27/00 A 832 B 540 26 25 24 23 22 21 20 19 18 17 15 10 11 34 14 10 13 11 12 11 10 9 8 7 6 5 4 3 2 1 140 86 L 47 45 44 43 42 41 40 39 38 37 16 36 35 34 33 32 31 30 29 10 28 27 16 46 60 Nozzle section, Barrels, Standpipe flanges, Breakable flange, Base, Main valve flange, Weathershield operating nut Main Valve Disc Caps Nozzles, Valve seat ring, Drain ring, Drain bushings and plugs, Stem nut, Stem Bushing, Thrust nut Stop nut, Cap chain, Bolts, Nuts Barrel gaskets, Cap gaskets O-rings Stem rod coupling Standpipe lock rings, Nozzle lock screw, Lock plate, Lock plate screw Ductile Iron GGG50, EN1563, ASTM A536 Ductile iron core, fully encapsulated in EPDM Rubber Cast iron GG25 EN1561, ASTM A126, Class B Bronze Zinc Plated Steel Nitrile rubber/buna "N" AISI 304 Component list Upper and Lower stem rod Epoxy coated steel, ASTM A108 1. Main Valve Core 2. Main Valve 3. Base Gasket 4. Lower Seat O-ring 5. Drain Bushing 6. Drain Ring 7. Valve Seat Ring 8. Upper Seat O-ring 9. Standpipe O-ring 10. Standpipe Flange 11. Lock Ring 12. Threaded Rod and Nut 13. Breakable Flange 14.Bolt and Nut 15.Screw 16.Seat Removal/Lock Pins 17.Stem Bushing O-rings 18.Oil reservoir O-rings 19.Upper StemRod Bushing 20.Stop Nut 21.Stem Nut 22.Anti Friction Washer 23.Upper and Lower Thrust nut O-rings 24.Lock plate Screw 25.Lock plate Components can be substituted with equivalent or higher class materials. 26. Weathershield Operating nut 27. Base 28. Main Valve / Drain Ring Flange 29. Standpipe 30. Lower Stem Rod 31. Split Bolt 32. Spring Pin 33. Breakable Coupling 34. Barrel Gasket 35. Upper Barrel 36. Upper Stem Rod 37. Cap Chain 38. Nozzle O-ring 39. Nozzle 40. Cap Gasket 41. Cap 42. Nozzle Section 43. Thrust nut 44. Lubrication HoleSeal 45. Operating Nut Screw 46. Nozzle Lock screw 47. Hose Nozzle Reference nos. and dimensions AVK Ref. nos. Nozzles A Bury Depth Standard B:Bury Depth Bury Depth Optional L flanged 27-00 2 x hose and 1 x pumper 1332 to 3832 1220 & 1370 500 to 3000 200 *Note: When ordering, please specify Base type and size, Bury depth, Pumper nozzle size, Nozzle threads and finished color Options: Flanged end, Duck foot to ANSI B16.42, Class 150: 4", 6" or 8" Flanged end, Duck foot to EN 1092-2, (DIN 2501) PN10/16: DN100 & DN150 Flanged end, Straight shoe to ANSI B16.42, Class 150: 6" Flanged end, Straight shoe to EN 1092-2, (DIN 2501) PN10/16: DN150 Straight Shoe Duck Foot The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product prograe. AVK SVMC 2/2 28.04.2013 MMH Previous version 28.04.2012 - MLJ

AVK DRY BARREL FIRE HYDRANT 27/00 010 Fire hydrant modern type to AWWA C502, for fire protection application to max. 70 C, designed according to DIN/EN, Flange drilling according to ANSI B16.1 Class 125 Hydraulic test to FM Class 1510, UL 246 and ULC CAN/ULC-5520-M91. FM Approved. UL and ULC listed. Dry barrel hydrant with replaceable nozzles and hydrant seat, and easily repairable traffic section. DN 150 footbend, 2 x 2.5" hose NST thread, 1 x 4" pumper NST thread and 1 1/2" pentagon operating nut. Nozzle section, barrels, base, flanges and operating nut of ductile iron. Main valve disc in ductile iron, fully encapsulated in EPDM rubber. Caps of cast iron. Nozzles, valve seat ring, drain bushings, stem nut, and stem bushing of bronze. Stop nut and cap chain of zinc plated steel. Stem rods, stem rod coupling and standpipe lock rings of stainless steel. Stem rod optionally in alubronze C 63000. Gaskets of nitrile rubber and O-rings of Buna "N". Coating: Fusion bonded epoxy. Above ground top coated with UV resistant polyester. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 10 Valves and hydrants for fire protection

AVK DRY BARREL FIRE HYDRANT 27/00 010 H3 787 508 19 18 17 16 15 14 13 10 9 12 8 11 B A 33 32 31 30 29 28 27 26 25 24 23 51 Feature A The modern design hydrant is designed to be a trouble free, easy to maintain hydrant featuring an easy operation. The thrust bearing requires a minimum of torque to operate. Feature B The dry barrel hydrant features a safety breakable flange and breakable stem rod coupling design. This allows the hydrant head assembly to be struck by a vehicle and "break away" reducing the impact on the water main. Feature C Fully encapsulated one-piece hydrant main valve in patented AVK design replaces up to 13 pieces. Ductile iron core fully encapsulated in EPDM rubber giving no exposed metal and thus completely corrosion resistant. Automatic drain ensures total emptying of the hydrant after use. During opening the hydrant is flushing the drain hole until 3 turns. 9 Component list 1. Main valve 13. Screw 25. Upper barrel 2. Base gasket 14. Seat removal/lock pin 26. Upper stem rod 3. Lower seat O-ring 15. O-rings 27. Cap chain 4. Drain bushing 16. Stop nut 28. Nozzle O-ring 5. Valve seat ring 17. Stem nut 29. Nozzle 6. Upper seat O-ring 18. Anti friction washer 30. Cap gasket 7. Lower barrel O-ring 19. Operating nut 31. Cap 8. Standpipe flange 20. Base 32. Nozzle section 9. Lock ring 21. Lower barrel 33. Thrust nut 10. Thr. rod/nut 22. Lower stem rod 34. Nozz. lock scr. 11. Breakable flange 23. Breakable coupling 12. Bolt and nut 24. Barrel gasket H5 10 9 8 7 C 6 5 4 3 2 1 L 86,2 22 21 8 20 14 34 Valves and hydrants for fire protection 11

6" BASE WITH PE 100 / PN 16 CONNECTION 27/00 002 Fire hydrant modern type to AWWA C502, designed according to DIN/EN. 6" hydrant base for AVK series 27 dry barrel hydrant. Base of ductile iron with fusion bonded epoxy coating according to GSK guidelines. A standard black/blue UL/FM approved SDR 11 PE-pipe is pressed onto the grooved valve end, locked with a st. 52 steel ring and sealed with a plastic shrink hose. The free pipe end allows for two times electrofusion welding to the connecting pipe. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 12 Valves and hydrants for fire protection

6" BASE WITH PE 100 / PN 16 CONNECTION 27/00 002 Total height H3 H5 2 1 51/2" 4 L 3 Component list 1. Base 2. PE-pipe 3. Sleeve 4. Shrink hose Reference nos. and dimensions AVK ref. nos. DN H3 H5 L Theoretical weight kg 27-150-69-00-80 #) 150 1701 914 712 156 # The dimensions shown are for shortest bury depth 3' / 914 m Valves and hydrants for fire protection 13

MONITOR ELBOW FOR SERIES 27 HYDRANT 27/00 003 Fire hydrant modern type to AWWA C502, designed according to DIN/EN, ANSI B16.1 CLASS 125 - ANSI B16.5 CLASS 150 Upper barrel with integrated monitor elbow for AVK series 27 dry barrel hydrant. Monitor flange in DN 80 or DN 100. Barrel and monitor elbow of ductile iron with fusion bonded epoxy coating and top coated with UV-resistant polyester. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 14 Valves and hydrants for fire protection

MONITOR ELBOW FOR SERIES 27 HYDRANT 27/00 003 Total height H3 559 787 508 To bottom H5 Reference nos. and dimensions AVK ref. nos. DN H3 H5 L Theoretical weight kg 27-080-89-12 #) 80 1701 914 343 175 27-100-89-12 #) 100 1701 914 343 175 # The dimensions shown are for shortest bury depth 3' / 914 m Valves and hydrants for fire protection 15

Vejle Brandvæsen 16 Valves and hydrants for fire protection

Wet barrel hydrants series 24 Wet barrel fire hydrants are designed for non frost areas. The series 24 wet barrel hydrant is designed with the shut-off device directly at the outflow nozzle for hose or pumper connection. This means that the hydrant is constantly filled with water and thus under pressure. The hydrant is mounted directly on the water main, giving full water pressure instantaniously when needed. Only after 1/8 turns on the stem the water starts to flow, and after 12 turns the full flow capacity can be held against the fire. The hydrant is not for use where the temperature may come below 0 C, due to the risk of frost bursting. In order to service and maintain the hydrant, we recoend installing an isolating gate valve on the upstream side. AVK wet barrel fire hydrants meet or exceed AWWA C-503 and are all UL/ULC listed and FM approved. The wet barrel hydrants are designed for high performance, easy repair and minimum end user costs for labor and inventory. Wet barrel fire hydrants to AWWA C-503-88. All the AVK hydrants offer numerous features including: 2 way outlet (1 x 21/2" and 1 x 4" or 41/2") 3 way outlet (2 x 21/2" and 1 x 4" or 41/2") 360º rotation possible when assembled with a breakable flange unit Removable nozzles Can be supplied with a wide range of nozzle thread specifications For special applications, series 24/60 with 6" NPT thread for connection to 6" pipe can be supplied Optional extra: 200 PSI Available in stainless steel and bronze Valves and hydrants for fire protection 17

AVK WET BARREL HYDRANT 24/10 001 Wet barrel hydrant with monitor flange to C 503, for fire protection application to max. 70 C, designed according to DIN/EN, Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Outlets/Inlet: Connection: Operated by 1/2" pentagon nuts 2 x 2.5" NST hose outlets 1 x 4" or 1 x 4.5" NST Pumper outlet or 5" Storz outlet Monitor flange 4" ANSI outlet 6" AWWA flange inlet (Standard) Options: 4", 6" or 8" ANSI flange Options: 4", 6" or 8" ANSI Traffic section Options: 6" ANSI Check valve Materials: Nozzle section Flange section Operating nut Caps Outlet nozzles Discs Cap chain Stems Gaskets O-rings Coating Ductile iron Ductile iron Ductile iron Cast iron Copper alloy Rubber (High strength brass core vulcanized with NBR Galvanized steel Copper alloy Rubber (NBR) Rubber (NBR) Fusion bonded polyester epoxy coated (UV resistant) in red color RAL 3000 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 18 Valves and hydrants for fire protection

AVK WET BARREL HYDRANT 24/10 001 355.6 C 4 ANSI Monitor Flange B Feature A Outlet nozzles are installed and secured in the hydrant head in a bayonet type design. 2 x 2 1/2 outlet and valve Feature B Breakable flange for easy re-installation using traffic kit. Hydrant adjustable 360 degrees. Pumper or Storz outlet H1 Feature C Hydrant has a 4" flange to ANSI B 16.42 for monitor installation. H5 A H2 A H3 H4 B Component list 1. Body 12. 5" storz nozzle 23. Bolt/washer 2. Stem nut 13. Cap O-ring 24. Break flange 3. Locking screw 14. 5" storz cap 25. Nut 4. O-ring 15. Disc vulcanized 26. O-ring 5. Stem nut screw 16. Disc core 27. Gasket 6. Stem nut 17. Lock screw 28. Bolt and washer 7. Stem seal O-ring 18. O-ring 29. Blank flange 8. Stem 19. Stem collar 30. Gasket 9. Cap attachment 20. Thrust nut 31. Nut and washer 10. O-ring 21. Lock screw 11. Outlet O-ring 22. Flange section Reference nos. and dimensions DN H1 H2 H3 H4 H5 Theoretical AVK ref. nos. weight kg 24-150-10-4000AZ80 150 710 522 476 355 862 75 Valves and hydrants for fire protection 19

AVK WET BARREL HYDRANT 24/70 001 Wet barrel hydrant with 1x2½" + 1x4/4½" outlets to AWWA C 503, for fire protection application to max. 70 C, designed according to DIN/EN, Hydraulic test according to UL 246 Sec. 1 (200 psi). UL listed. Wet barrel hydrant with replaceable nozzles and easily repairable traffic section. 1 x 2.5" hose outlets, and 1 x 4"/4.5" outlet. 4" or 5" storz pumper and 1 1/2" pentagon operating nut. Nozzle section and operating nut of ductile iron. Caps of cast iron. Nozzles of bronze. Disc core of high strength brass. Cap attachment of galvanized steel. Stems of bronze. Gasket of asbestos free rubber. O-rings of UL approved nitrile rubber. Coating: Fusion bonded TGIC polyester. Options: 4", 6" and 8" flange inlet. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 20 Valves and hydrants for fire protection

AVK WET BARREL HYDRANT 24/70 001 Top may be tapped for 21/2" auxillary valve Feature A Outlet nozzles are installed and secured in the hydrant head in a bayonet type design. 19 18 17 Feature B Breakable flange for easy re-installation using traffic kit. Hydrant adjustable 360 degrees. 8 7 6 5 16 15 14 H5 H3 H4 4 3 2 1 13 12 11 10 9 20 Component list 1. Body 8. O-ring 15. Disc core 2. Stem nut 9. Cap attachment 16. Stem collar 3. Locking screw 10. Outlet O-ring 17. Thrust nut 4. O-ring 11. Nozzle 18. O-ring 5. Duy nut 12. Cap gasket 19. Stem 6. Duy nut screw 13. Cap 20. Nozzle screw 7. Stem seal O-ring 14. Lock screw Reference nos. and dimensions AVK ref. nos. DN H3 H4 H5 Theoretical weight kg 24-150-70-00000001 150 470 356 572 62 24-150-70-00002901 150 470 356 572 62 Valves and hydrants for fire protection 21

AVK WET BARREL HYDRANT 24/90 001 Wet barrel hydrant with 2x2½" + 1x4/4½" outlets to AWWA C 503, for fire protection application to max. 70 C, designed according to DIN/EN, Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Wet barrel hydrant with replaceable nozzles and easily repairable traffic section. 2 x 2.5" hose outlets, and 1 x 4"/4.5" outlet. 4" or 5" storz pumper and 1 1/2" pentagon operating nut. Nozzle section and operating nut of ductile iron. Caps of cast iron. Nozzles of bronze. Disc core of high strength brass. Cap attachment of galvanized steel. Stems of bronze. Gasket of asbestos free rubber. O-rings of UL approved nitrile rubber. Coating: Fusion bonded TGIC polyester. Options: 4", 6" and 8" flange inlet. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 22 Valves and hydrants for fire protection

AVK WET BARREL HYDRANT 24/90 001 B B 8 7 19 18 17 16 15 Feature A Outlet nozzles are installed and secured in the hydrant head in a bayonet type design. Feature B Breakable flange for easy re-installation using traffic kit. Hydrant adjustable 360 degrees. A A H5 H2 H3 H4 6 5 4 3 2 1 14 13 12 11 10 9 20 Component list 1. Body 8. O-ring 15. Disc core Top may be tapped for 2. Stem nut 9. Cap attachment 21/2" auxillary valve 16. Stem collar 3. Locking screw 10. Outlet O-ring 17. Thrust nut 4. O-ring 11. Nozzle 18. O-ring 5. Duy nut 12. Cap gasket 19. Stem 6. Duy nut screw 13. Cap 20. Nozzle screw 7. Stem seal O-ring 14. Lock screw H5 H3 H4 8 Reference nos. and dimensions 7 6 DN H2 H3 H4 H5 Theoretical AVK ref. nos. 5 weight kg 24-150-90-00000001 4 24-150-90-00002901 3 150 150 552 552 476 476 356 356 645 645 65 65 2 1 19 18 17 16 15 14 13 12 11 10 9 20 Valves and hydrants for fire protection 23

Valves and hydrants for fire protection 25

26 Valves and hydrants for fire protection Easy-Open valve applied in monitor hydrant Series 84/60

Monitor hydrants series 84/60 and series 27 The monitor hydrants are primarily developed for installation in chemical and petrochemical industrial plants as well as refineries and tank farms, airports and other plants with large quantities of inflaable liquids posing fire hazards. Both types of these hydrants are available with 2 x 21/2" hose nozzles and 1 x 4" pump nozzle. The American type, series 27, is supplied with a 6" base delivered with either a flange connection or a PE-pipe connection. The European type, series 84, is available with a 4" base with 4" flange connection. The monitor elbow in 4" is supplied with an isolating butterfly valve, a suspension arm with a 360º step-less, horizontal adjustment, and a -45º to -90º step-less, vertical adjustment. A spray nozzle is mounted on the outside to supply 2000 litres/min. Series 84 also has "easy-open" valves to ensure connection of fire hoses, even if the monitor is in use. The hydrant can be maintained without installation of an isolating shut-off valve in front of it. The additional ball shut-off makes it easy to replace internal parts without digging up the hydrant and without emptying the fire water main. The hydrant is delivered with a vertical connection as standard; yet a horizontal connection can be offered as an option. Fire protection with large volumes of water. Monitor asssembly DN 100 360 rotatable top Coupling 2 x B Storz 1 x A Storz UV resistant polyester finish to RAL 3000 Monitor jet slewable Easy to open at 16 bar water pressure: Builds up counter pressure at opening and closing Works with principle of counter stream Ideal for high pressure Valves and hydrants for fire protection 27

AVK HIGH PRESSURE DRY BARREL HYDRANT 27/20 Working pressure 200 PSI. flanged, mechanical joint or push-on base. Meets or exceeds ANSI/AWWA C502 (latest). Removable / replaceable nozzles and hydrant seat. Top stop nut. Easily repaired traffic section. Nozzle section rotates 360. 5 1/4" main valve opening. All bronze drain ring, plugable drains. Tests: Pressure tested to twice the rated working pressure - 400 PSI Options: Bury depths from 11/2'- 121/2', in 6" increments. 4" or 41/2" pumper nozzle. Base available in flanged or mechanical joint and push-on for D.I. size pipe. Accessories: Extensions kits in 6" increments Traffic section repair kits Seat removal wrench Operating wrench Materials: Nozzle section, Ductile iron barrels, standpipe flanges, breakable flange, base, main valve flange, weathershield operating nut, Main valve disc Ductile iron core, fully encapsulated in EPDM rubber Caps Cast iron Coating Above ground, fusion bonded epoxy, inside and out. Below ground, Bitumen/fusion bonded epoxy Nozzles, Bronze valve seat ring, drain ring, drain bushings and plugs, stem nut, stem bushing, thrust nut Stop nut, cap Zinc plated steel chain, bolts, nuts Upper and lower Epoxy coated steel stem rod Stem rod Stainless steel coupling, standpipe lock rings, nozzle lock screw, lock plate, lock plate screw, spider bolt Barrel gaskets, Nitrile rubber cap gaskets O-rings Buna "N" For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 312720AC COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 28 Valves and hydrants for fire protection

AVK HIGH PRESSURE DRY BARREL HYDRANT 27/20 Working pressure 200 PSI. flanged, mechanical joint or push-on base. Meets or exceeds ANSI/AWWA C502 (latest). Removable / replaceable nozzles and hydrant seat. Top stop nut. Easily repaired traffic section. Nozzle section rotates 360. 5 1/4" main valve opening. All bronze drain ring, plugable drains. Component list 1. Hydrant 2. PE-inlet 3. Elbow 4. Butterfly valve 5. Pocket monitor H L 5 4 3 1 2 3 5 6 7 12 15 210 450 Ref. nos. Nozzles B L L L flanged mech. joint push-on 27-20 2 hose and 1 pumper 18" - 150" 8.0 8.0 24" Note: When ordering, please specify base type and size, bury depth, operating / cap nut dimensions, direction of opening, pumper nozzle size, nozzle threads and finished color. Approx. weight for a hydrant with 2.5' bury depth is 300 lbs. Add or subtract approx. 40 lbs. for each 6" longer or shorter. B 51/2" L 2 Appr. 655 1 4 8 9 10 11 13 14 16 17 18 19 20 Valves and hydrants for fire protection 29

MONITOR HH 365 WITH jet-spray NOzzLE Mz 2000 Compact monitor DN 80, PN 16 for water and foam (AFFF) Lockable in any position 360 degree horizontal, -45 to +90 degree vertical. Spray nozzle adjustable from hollow to spray jet of 110 degree. Product specification: - Service friendly construction and easy maintenance through ballbearing swivel joint. - Easy to operate up to maximum working pressure - With the toothed washer the lever can step less be adjusted to any position - Both the horizontal and vertical swiveling motion can be fixed at any requested position. Materials: Monitor body Aluminum alloy EN 1706 AC-AISi7Mg0,3 S T6, hard anodized Gaskets Acrylonitrile Standard parts High-grade steel Coating Twopack polyacryl wet spray RAL 3000 Technical information: Capacity: max. 2000 l/min Max. working pressure: PN16 Inlet: Flange, 3 ANSI cl. 150 Swiveling range: Horizontal: 360 degrees, infinitely variable Vertical: -45 degrees to +90 degrees Both directions can be locked by star shaped grip. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 31MONITOR COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 30 Valves and hydrants for fire protection

MONITOR HH 365 WITH jet-spray NOzzLE Mz 2000 Compact monitor DN 80, PN 16 for water and foam (AFFF) Lockable in any position 360 degree horizontal, -45 to +90 degree vertical. Spray nozzle adjustable from hollow to spray jet of 110 degree. DN Outlet thread L W H Weight kg 80 G 2 ½ A 400 455 300 9 Valves and hydrants for fire protection 31

Vejle Brandvæsen Resilient seated gate valves A published test performed in City of Roseville, US, has proved that impurities up to Ø 8.7 can be handled by a DN 150 valve without any problems. The same test proved that the unique AVK EPDM rubber quality is the only rubber quality which instantly returns to the original shape when the valve is opened again. Resilient seated gate valves Metal seated gate valves 32 Valves and hydrants for fire protection

Post indicators, wall indicators and post indicator valves Post indicators and wall indicators are mounted end to end with the extension spindle connecting the valve. It is mounted in places where direct access is impossible. It could be gate valves mounted on a water ring main in a factory area, such as oil refineries, chemical plants or airports. The post indicator indicates if the valve is in open or closed position. According to government regulations, it must be easy for firemen to see if the valve is open or closed, even at a long distance. The post indicator signs OPEN and SHUT are mounted on the target according to clear locations and according to valve size. The post indicator valves are used for underground installation in fire protection systems. The post indicator flange is incorporated in the top gland, giving a compact design. The post indicator indicates the position of the wedge, whether it is open or closed. The basic valve construction is, like the construction of valves for water supply, characterized by a fully rubber coated wedge, full and straight bore, low torque operation and O-ring stem seals replaceable under pressure. UL/FM for DN 100-300 Valves and hydrants for fire protection 33

AVK POST INDICATOR 34/00 001 Indicator post to UL 789 and FM class no. 1110, for fire protection application, designed according to DIN/EN, Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Indicator head, bell, wrench nut and operating wrench of ductile iron GJS-500-7 (GGG-50) with epoxy coating according DIN 30677-2 and GSK guidelines - internally and externally. Barrels of steel and stem of galvanized steel. Target of copper alloy and target sign of aluminium. Bolts, nuts, washers, screws and pins of stainless steel. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 34 Valves and hydrants for fire protection

AVK POST INDICATOR 34/00 001 1 2 3 4 955 762 5 6 7 T 8 9 10 11 12 13 14 15 4 X 19 pitch dia. 266.7 Component list 1. Stem nut 2. Operating wrench 3. Indicator head 4. Target sign 5. Target 6. Bolt and washer 7. Upper stem 8. Upper barrel 9. Bolt 10. Lower stem 11. Lower barrel 12. Wrench nut 13. Tension pin 14. Bell 15. Bolt, washer and nut Reference nos. and dimensions AVK ref. nos. DN T T Factory set Theoretical weight kg 34-100-00-00010010 100 505-1090 635 72 34-100-00-01010010 100 1065-1660 1194 86 34-100-00-02010010 100 1626-2210 1752 100 34-150-00-00010010 150 505-1090 635 72 34-150-00-01010010 150 1065-1660 1194 86 34-150-00-02010010 150 1625-2210 1752 100 34-200-00-00010010 200 505-1090 635 72 34-200-00-01010010 200 1065-1660 1194 86 34-200-00-02010010 200 1625-2210 1752 100 34-250-00-00010010 250 505-1090 635 72 34-250-00-01010010 250 1065-1660 1194 86 34-250-00-02010010 250 1625-2210 1752 100 34-300-00-00010010 300 505-1090 635 72 34-300-00-01010010 300 1065-1660 1194 86 34-300-00-02010010 300 1625-2210 1752 100 Valves and hydrants for fire protection 35

AVK WALL POST INDICATOR 34/80 001 Wall post to UL 789 and FM class no. 1110, for fire protection application, designed according to DIN/EN, Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Wall indicator head and wrench nut of ductile iron GJS-500-7 (GGG-50). Stem of steel and stem nut of copper alloy. Target of copper alloy and target sign of aluminium. Eye bolt of hot dip galvanized steel and handwheel of cast iron. Epoxy coating according DIN 30677-2 and GSK guidelines - internally and externally. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 36 Valves and hydrants for fire protection

AVK WALL POST INDICATOR 34/80 001 360 1 2 3 4 468 5 6 7 8 Component list 1. Eye bolt 2. Handwheel 3. Stem nut 4. Stem 5. Target sign 6. Target 7. Wall indicator head 8. Wrench nut 4 X 19 pitch dia. 266.7 Reference nos. and dimensions AVK ref. nos. DN Stem length Theoretical weight kg 34-100-80-00010010 100 250 29 34-100-80-01010010 100 750 32 34-100-80-02010010 100 1250 34 34-150-80-00010010 150 250 29 34-150-80-01010010 150 750 32 34-150-80-02010010 150 1250 34 34-200-80-00010010 200 250 29 34-200-80-01010010 200 750 32 34-200-80-02010010 200 1250 34 34-250-80-00010010 250 250 29 34-250-80-01010010 250 750 32 34-250-80-02010010 250 1250 34 34-300-80-00010010 300 250 29 34-300-80-01010010 300 750 32 34-300-80-02010010 300 1250 34 Valves and hydrants for fire protection 37

AVK POST INDICATOR GATE VALVE, PE 100 PIPE ENDS, PN 16 36/00 116 Gate valve with post indicator flange and PE-pipe ends, for fire protection application to max. 20 C, designed according to DIN/EN. Resilient seated gate valve to EN 1074-1 and 2 / EN 1171 with PE-pipe ends, post indicator flange and wrench nut. A standard black/blue DVGW approved SDR 11 PE-pipe is pressed onto the grooved valve end, locked with a st. 52 steel ring and sealed with a plastic shrink hose. Body, bonnet and post indicator flange of GJS-500-7 (GGG-50). Wedge of ductile iron fully vulcanized with EPDM rubber and with fixed brass wedge nut. Stem of stainless steel min. 15.5% Cr with rolled thread and wedge stop ring. Stem sealing consists of two upper O-rings in a stem seal box, one lower O-ring and one O-ring gland seal. EPDM bonnet gasket in a groove, countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt. Wrench nut of cast iron. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Accessories: Post indicator AVK series 34/00, wall post indicator AVK series 34/80, combi-flange AVK series 05 and flange adaptor AVK series 623. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 38 Valves and hydrants for fire protection

AVK POST INDICATOR GATE VALVE, PE 100 PIPE ENDS, PN 16 36/00 116 H 21 20 19 18 17 16 E A C B 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A. Stem sealing Stem sealing replaceable under pressure with three independent stem seals consisting of a NBR wiper ring protects against dirt from outside. A polyamid bearing with 2 O-rings ensures low friction and an O- ring protects the stem collar preventing leakage when replacing stem seals under pressure. B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. Component list 1. PE-pipe 2. Sleeve 3. Shrink hose 4. Body 5. Wedge 6. Wedge nut 7. Bonnet gasket 8. Bonnet screw 9. Bonnet 10. Stem seal 11. Stem collar 12. O-ring 13. Bushing 14. Wiper ring 15. Stem 16. O-ring 17. Post indicator flange 18. Hexagon bolt 19. Wrench nut 20. Washer 21. Hexagon bolt L D L1 D C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. E. PE-pipe end The PE-pipe end enable direct welding into PE-pipes by using socket fusion or butt welding resulting in a fast, effective and secure assembly. A piece of standard PE-pipe is pressed directly onto the grooved valve end. The patented grooving combined with a sleeve around the valve/pipe connection ensures that the PE-pipe material is pressed into the grooves on the valve end. The boltless, corrosionfree assembly is as minimum as strong as the PEpipe itself. The full, straight bore ensures minimum pressure loss and facilitates under pressure drilling. Reference nos. and dimensions AVK ref. nos. DN D L L1 H Theoretical weight kg 36-090-00-163 80 90 900 250 314 20 36-110-00-163 100 110 900 250 343 30 36-160-00-163 150 160 1100 325 446 55 36-180-00-163 150 180 1100 265 446 58 36-200-00-163 200 200 1100 255 542 88 36-250-00-163 250 250 1350 420 625 118 36-315-00-163 300 315 1350 355 701 140 Valves and hydrants for fire protection 39

AVK POST INDICATOR GATE VALVE, PN 16, CTC 25/49 010 Flanged gate valve, for fire protection applications to max. 70 C, designed according to DIN/EN, AWWA C509. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Resilient seated gate valve to AWWA C509 (NRS) with non rising stem, post indicator flange and wrench nut. DN 65-250: Body, bonnet and post indicator flange of grey cast iron GJL-250 (GG-25). DN 300: Body, bonnet and post indicator flange of ductile iron GJS-500-7 (GGG-50). Wedge of ductile iron fully vulcanized with EPDM rubber and with fixed brass wedge nut. Stem of stainless steel AISI 304 with rolled thread and wedge stop ring. Stem sealing consists of two upper O-rings in a stem seal box, one lower O-ring and one O-ring gland seal. NBR bonnet gasket in a groove, countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt. Wrench nut of cast iron. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Accessories: Post indicator AVK series 34/00, wall post indicator AVK series 34/80, combi-flange AVK series 05 and flange adaptor AVK series 623. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 40 Valves and hydrants for fire protection

AVK POST INDICATOR GATE VALVE, PN 16, CTC 25/49 010 H Component list L 1. Hexagon bolt 8. Gland flange 15. Bonnet bolt 2. Washer 9. O-ring gland seal 16. Wedge nut 3. Wrench nut 10. Thrust collar 17. Stem 4. Gland bolts 11. O-ring stem seal 18. Vulcan. wedge 5. Wiper ring 12. Bonnet bolt seal 19. Wedge body 6. Bushing 13. Valve bonnet 20. Valve body 7. O-ring stem seals 14. Bonnet gasket H 1 2 3 5 6 7 12 15 1 2 3 5 6 7 12 15 A. Stem sealing Stem sealing 4 replaceable under pressure with three independent stem seals consisting of a NBR wiper ring protects 8 against dirt from outside. A polyamid bearing with 2 O-rings ensures low friction and an O- ring protects 9 the stem collar preventing leakage when replacing stem seals under pressure. 10 B. Body/bonnet 11 connection The unique assembly of the valve body and bonnet ensures 13a durable tightness: A round rubber bonnet gasket fits into a recess in the valve 14 bonnet preventing it from being blown out by pressure surges. The 16 stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and 17 sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. 18 C. Wedge 19 nut The fixed, integral wedge nut reduces the number of movable 20valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. 4 8 9 10 11 13 14 16 17 18 19 20 Reference nos. and dimensions L AVK ref. nos. DN PN drilling H L Theoretical weight kg 25-080-49-016001 #) 80 16 307 203 39 25-100-49-016001 #) 80 16 343 229 40 25-150-49-016001 #) 150 16 445 267 60 25-200-49-016001 #) 200 16 546 292 90 25-250-49-016001 #) 250 16 628 330 135 25-300-49-016001 #) 300 16 701 356 174 # UL/FM approved. Other flange drillings on request Valves and hydrants for fire protection 41

The most used combinations AVK offers complete solutions to all secondary valves on the fire water main. Telescopic extension spindles are mounted on valves with a wrench nut, which ensures that the valve can be operated even in very deep pipe cover. A street cover in red RAL 3000 ensures easy localisation of the valve. The street cover is reversible and can be installed as a floating as well as a fixed cover. Cover and spindle are assembled by means of the ears on the top adaptor enabling a trouble-free length adjustment at ground level. Valves and hydrants for fire protection 43

AVK GATE VALVE WITH WRENCH NUT, PN 16, CTC 25/49 020 Flanged gate valve, for fire protection applications to max. 70 C, designed according to DIN/EN, AWWA C509. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Resilient seated gate valve to AWWA C509 (NRS) with non rising stem and wrench nut. DN 65-250: Body and bonnet of grey cast iron GJL-250 (GG-25) DN 300: Body and bonnet of ductile iron GJS-500-7 (GGG-50) Wedge of ductile iron fully vulcanized with EPDM rubber and with fixed brass wedge nut. Stem of stainless steel AISI 304 with rolled thread and wedge stop ring. Stem sealing consists of two upper O-rings in a stem seal box, one lower O-ring and one O-ring gland seal. NBR bonnet gasket in a groove, countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt. Wrench nut of cast iron. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Accessories: Stem extension AVK series 04/041, street cover AVK series 04/74, combi-flange AVK series 05 and flange adaptor AVK series 623. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-06 12:53 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 44 Valves and hydrants for fire protection

AVK GATE VALVE WITH WRENCH NUT, PN 16, CTC 25/49 020 H 1 2 3 5 6 7 12 15 A. Stem sealing Stem sealing replaceable under pressure with three independent stem seals consisting of a NBR wiper ring protects against dirt from outside. A polyamid bearing with 2 O-rings ensures low friction and an O- ring protects the stem collar preventing leakage when replacing stem seals under pressure. B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. Component list L C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. 1. Hexagon bolt 8. Gland flange 15. Bonnet bolt 2. Washer 9. O-ring gland seal 16. Wedge nut 3. Wrench nut 10. Thrust collar 17. Stem 4. Gland bolts 11. O-ring stem seal 18. Vulcan. wedge 5. Wiper ring 12. Bonnet bolt seal 19. Wedge body 6. Bushing 13. Valve bonnet 20. Valve body 7. O-ring stem seals 14. Bonnet gasket D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. 4 8 9 10 11 13 16 14 17 18 19 20 Reference nos. and dimensions AVK ref. nos. DN PN drilling H L Theoretical weight kg 25-065-49-016 #) 65 16 311 191 18 25-080-49-016 #) 80 16 307 203 21 25-100-49-016 #) 100 16 343 229 33 25-150-49-016 #) 150 16 445 267 53 25-200-49-016 #) 200 16 546 292 83 25-250-49-016 #) 250 16 628 330 128 25-300-49-016 #) 300 16 701 356 166 # UL/FM approved. Other flange drillings on request Valves and hydrants for fire protection 45

AVK UNIVERSAL STREET COVER 04/74 001 Fixed/floating ductile iron street cover, designed according to DIN/EN. The reversible street cover can be used as fixed and floating street cover. Body and distance ring of ductile iron GJS-500-7 (GGG-50) and lid of grey cast iron GJL-250 (GG-25) with epoxy coating to DIN 30677. Fixation plate of PE and O-ring of NBR rubber. With deflection ability and internal fixation of telescopic extension spindles from both ends. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 46 Valves and hydrants for fire protection

AVK UNIVERSAL STREET COVER 04/74 001 4 W 5 1 2 W 3 H3 H3 L1 L L1 L Component list 1. O-ring 2. Lid 3. Fixation plate 4. Distance ring 15 5. Body Reference nos. and dimensions L H3 L1 W Theoretical AVK ref. nos. weight kg 04-003-74-200 235 224 112 131 11 Valves and hydrants for fire protection 47

AVK EXTENSION SPINDLE, TELESCOPIC 04/041 002 For gate valves with 51 stem cap, designed according to DIN/EN. Telescopically adjustable extension spindle available in four different length ranges. Protection tube, top adaptor and bottom cover of PE. Internal tubes of galvanized steel and spindle adapter of cast stainless steel. Lock spring of stainless steel keeps the telescopic part in place during installation. Centre sleeve of plastic protects against penetration of sand and dirt. Top adaptor with ears enables fixation in street covers. Conical 23-32 key adapter designed for universal T-operating keys. With 51 spindle adaptor for connection to US type wrench nut. With anti-freeze hole in the top adapter. Actual length 450-2900. Accessories: Operating key AVK series 04, adapters for key AVK series 04, street covers AVK series 04 and 80, support plate AVK series 80 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 48 Valves and hydrants for fire protection

AVK EXTENSION SPINDLE, TELESCOPIC 04/041 002 AVK EXTENSION SPINDLE, TELESCOPIC 04/041 L8 L8 D F3 L8 D F3 D F3 Component list Component list 1 2 1 3 2 1 4 3 2 5 4 3 6 5 4 6 57 6 78 89 7 910 8 1011 9 1112 10 12 11 L8 D F3 Reference nos. and dimensions 12 1. Key adapter 2. 1. Top Key adapter 3. 2. Upper Top adapter inner tube 4. 3. Upper inner protection tube tube 5. 4. Centre Upper protection sleeve tube 6. 5. Lock Centre spring sleeve 6. Lock spring 7. Lower inner tube 7. Lower inner tube 8. Lower protection tube 8. Lower protection tube 9. Stop ring 9. Stop ring 10. 10. Spindle Spindle adapter adapter 11. Spindle cover cover top top 12. Bottom cover L8 1 2 3 4 5 6 7 8 9 10 10 11 11 12 12 DN DN DND D D F3 F3 L8 L8 L8 Theoretical Theoretical AVK AVK ref. ref. Nos. nos. weight weight kg Weight kg kg 04-200-4-00020001 65 65 98 98 23-32 23-32 450-700 450-700 3,9 3,9 04-080-4-00020001 04-200-4-05020001 65-80 200 200 98 98 98 23-32 23-32650-1100 650-1100 450-700 3,9 3,9 1,9 04-080-4-05020001 04-200-4-10020001 65-80 200 200 98 98 98 23-32 23-32 1050-1750 1050-1750 650-1100 3,9 3,9 2,6 04-080-4-10020001 04-200-4-15020001 04-200-4-15020001 65-80 300 300 98 98 98 23-32 23-32 1700-2900 1050-1750 1700-2900 3,9 3,9 3,8 04-080-4-15020001 65-80 98 23-32 1700-2900 5,8 04-125-4-00020001 100-125 98 23-32 450-700 1,8 04-125-4-05020001 100-125 98 23-32 650-1100 2,6 01-125-4-10020001 100-125 98 23-32 1050-1750 4 04-125-4-15020001 100-125 98 23-32 1700-2900 5,8 04-150-4-00020001 150 98 23-32 450-700 2,3 04-150-4-05020001 150 98 23-32 650-1100 3,1 04-150-4-10020001 150 98 23-32 1050-1750 4,5 04-150-4-15020001 150 98 23-32 1700-2900 7,5 04-200-4-00020001 200 98 23-32 450-700 2,3 04-200-4-05020001 200 98 23-32 650-1100 4,3 04-200-4-10020001 200 98 23-32 1050-1750 3,9 04-200-4-15020001 200 98 23-32 1700-2900 6,9 04-300-4-00020001 250-300 98 23-32 450-700 2,4 04-300-4-05020001 250-300 98 23-32 650-1100 3,2 04-300-4-10020001 250-300 98 23-32 1050-1750 4,6 04-300-4-15020001 250-300 98 23-32 1700-2900 7,1 D F3 1 2 3 4 5 6 7 8 9 002 Use, telescopic Extension spindles are used for easy access to operation of valves installed below ground. Telescopic extension spindles are used if the Use, distance telescopic between valve and ground surface is nondefined Extension spindles are used for easy access to operation of valves and adjustment installed below of the ground. extension spindle thus is required after the installation. The conical key Telescopic extension spindles are used if the adaptor fits standard T-keys. distance between valve and ground surface is nondefined and adjustment of the extension spindle thus is required after the installation. The conical key Features, telescopic adaptor fits standard T-keys. The top adapter with ears can be fixed into AVK street covers. The lock spring keeps the telescopic Features, part in telescopic place during installation, as it creates friction The top inside adapter the PE with pipe. ears The can be centre fixed sleeve into AVK protects street against covers. penetration The lock spring of sand keeps and the dirt telescopic in between the part in two place outer during PE pipes. installation, The bottom as it creates cover friction protects the inside valve the PE spindle pipe. The from centre sand sleeve and dirt protects and enables it to against rotate penetration freely. The of sand components and dirt in are between made the of corrosion two outer free PE materials pipes. The for long bottom lifetime. cover protects the valve spindle from sand and dirt and enables it to rotate freely. The components are made of corrosion free materials for long lifetime. Valves and hydrants for fire protection 49 Valves and hydrants for fire protection 49

Vejle Brandvæsen 50 Valves and hydrants for fire protection

SPRI NKLER-ALARM SPRI NKLER-ALARM Pipework installed above suspended ceiling - pendent sprinklers Sprinkler pipework installed visible - upright sprinklers with riser Sprinkler pipework installed visible - upright sprinklers with riser Pipeworks installed above suspended ceiling - pendent dry sprinklers Escutcheon Wet pipe system for frost-protected rooms Wet pipe valve set Dry pipe valve set Dry pipe system for rooms subject to frost hazard Automatic feed mechanism Test line for pump Water pressure vessel Manifold Town main Overflow drain Control cabinet Suction pipe Town main Pump suction tank Fire pump Compressor unit Jockey pump Feeding tank 52 Valves and hydrants for fire protection

Gate valves for indoor systems and sprinkler systems AVK resilient seated gate valves are designed with a fully vulcanized rubber wedge - internally and externally. With this design no iron parts are exposed to the medium, and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. The rubber is vulcanized onto the wedge by AVK GUMMI A/S, one of Europe's leading manufacturers of high technology moulded rubber components. The high quality of AVK rubber is characterized by: Smell and taste response characteristics highly suitable for the food industry Very low deformation ensuring optimum sealing High impact resistance preventing corrosion Low friction ensuring low closing torques EPDM rubber for water supply, NBR rubber for gas supply Standard stem sealing system applications - to DIN standard. NBR wiper ring polyamid bearing with 4 O-rings EPDM rubber manchette Standard stem sealing system applications - to AWWA standard. NBR wiper ring polyamid bearing with 2 O-rings, replaceable under pressure with the valve fully open. O-ring protects the antifriction washers Optional stem material: Low zinc bronze Valves and hydrants for fire protection 53

Gate valves series 0 6/35 and series 25/46 Series 06/35 The light weight flanged gate valve is very suitable for use in fire protection systems as an isolating gate valve for maintenance purpose. The pin indicator indicates the wedge position. Micro switches for remote indication of the wedge in open or closed position are available as an optional extra. The basic valve construction is, like the construction of valves for water supply, characterized by a fully rubber coated wedge, full and straight bore and 3 independant stem seals. GGG-50 Face to face to DIN 3202, F4 DN 50-400 VdS-approved Series 25/46 The OS&Y gate valves with flanges are used in above ground installations. Due to the rising stem it is easy to recognize the valve position, open or closed, even at a distance. The basic valve design is characterized by a fully rubber coated wedge, full and straight bore, low torque operation and O-ring stem seals replaceable under pressure. DN 65-300 (2" - 12") UL-listed, FM-approved Valves and hydrants for fire protection 55

AVK FLANGED GATE VALVE, PN 10/16, CTC 06/35 013 Flanged gate valve with pin indicator, for fire protection application to max. 70 C, designed according to DIN/EN, Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic test according to VdS. Approved according to VdS Certificate No. G 4960035. Resilient seated gate valve to EN 1074-1 and 2 / EN 1171. Body and bonnet of GJS-500-7 (GGG-50). Wedge of ductile iron fully vulcanized with EPDM rubber and with fixed brass wedge nut. Stem of stainless steel min. 13% Cr with rolled thread and wedge stop ring. Stem sealing with 4 O-rings in a nylon bearing, an EPDM rubber manchette and a NBR wiper ring. EPDM bonnet gasket in a groove, countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt. Pin of stainless steel, indicator nut of dezincification resistant brass and handwheel of cast iron. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Accessories: Combi-flange AVK series 05, flange adaptors AVK series 603 and 623 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 56 Valves and hydrants for fire protection

AVK FLANGED GATE VALVE, PN 10/16, CTC 06/35 013 D 1 2 3 4 5 6 A. Stem sealing Three independent stem seals offering triple safety: A NBR wiper ring protects against dirt from outside. A polyamid bearing with 4 NBR O-rings protects against galvanic corrosion. An EPDM rubber manchette sealing acts as the main hydraulic seal to the flow. H C A B 7 8 9 10 11 12 13 14 B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. L D 15 C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. Component list 1. Handwheel 2. Stem 3. Pin 4. Indicator nut 5. NBR Wiper ring 6. NBR O-ring 7. Plastic bearing 8. Bonnet 9. Thrust collar 10. Rubber manchette 11. Bonnet bolt 12. Bonnet gasket 13. Wedge nut 14. Wedge 15. Body D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. Reference nos. and dimensions AVK ref. nos. DN PN drilling L H D Theoretical weight kg 06-050-35-01620 50 10/16 150 329 180 13 06-065-35-01620 65 10/16 170 355 225 16 06-080-35-01620 80 10/16 180 382 225 20 06-100-35-01620 100 10/16 190 414 280 27 06-125-35-01620 125 10/16 200 461 320 36 06-150-35-01620 150 10/16 210 540 320 51 06-200-35-00620 200 10 230 688 360 71 06-200-35-01620 200 16 230 688 360 71 06-250-35-00620 #) 250 10 250 780 500 113 06-250-35-01620 #) 250 16 250 780 500 113 06-300-35-00620 #) 300 10 270 855 500 160 06-300-35-01620 #) 300 16 270 855 500 160 06-350-35-00620 #) 350 10 290 930 640 203 06-350-35-01620 #) 350 16 290 930 640 203 06-400-35-00620 #) 400 10 310 940 640 240 06-400-35-01620 #) 400 16 310 960 640 240 # Not approved to VdS Valves and hydrants for fire protection 57

AVK GATE VALVE OS&Y, PN 16, CTC 25/46 010 Flanged gate valve with rising stem OS&Y, for fire protection application to max. 70 C, designed according to DIN/EN, AWWA C509. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic tests according to FM and UL Standards. FM Approved. UL listed. Resilient seated gate valve to AWWA C509. DN 65-250: Body and bonnet of grey cast iron GJL-250 (GG-25) DN 300: Body and bonnet of ductile iron GJS-500-7 (GGG-50) Yoke and gland follower of GJS-500-7 (GGG-50). Handwheel of GJL-250 (GG-25). Wedge of ductile iron fully vulcanized with EPDM rubber with fixed brass wedge nut. Stem of copper alloy C36000 ASTM B16 with rolled thread. Stem seal with 3 SBR O- rings and 2 NBR O-rings in a nylon gland bushing. Gland and gland bushing of polyamid, and anti-friction washer of bronze RG5. NBR bonnet gasket in a groove, countersunk bonnet bolts of stainless steel encircled by the bonnet gasket and sealed with hot melt. Pin and hexagon keys of stainless steel A2. Stud bolts and washers of zinc coated steel. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 58 Valves and hydrants for fire protection

AVK GATE VALVE OS&Y, PN 16, CTC 25/46 010 D 1 2 3 4 5 6 7 B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. Hc L C D B 8 9 10 11 12 13 14 15 16 17 18 19 20 Ho C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. Component list 1. Stem nut 2. Handwheel 3. Washer 4. Stud bolt 5. Yoke 6. Gland follower 7. Hexagon nut 8. Gland 9. Washer 10. O-ring 11. Gland bushing 12. O-ring 13. Bonnet 14. Bonnet bolt 15. Bonnet gasket 16. Stem 17. Pin 18. Wedge nut 19. Wedge 20. Body Reference nos. and dimensions AVK ref. nos. DN L Hc Ho D Turns to open Theoretical weight kg 25-065-46-01600020 #) 65 190 332 398 229 17 23 25-080-46-01600020 #) 80 203 350 429 229 20 25 25-100-46-01600020 #) 100 229 420 524 279 21 39 25-150-46-01600020 #) 150 267 581 736 330 26 63 25-200-46-00600020 #) 200 292 736 942 356 35 97 25-200-46-01600020 #) 200 292 736 942 356 35 97 25-250-46-00600020 #) 250 330 882 1138 457 37 157 25-250-46-01600020 #) 250 330 882 1138 457 37 157 25-300-46-00600020 #) 300 356 1009 1317 457 44 238 25-300-46-01600020 #) 300 356 1009 1317 457 44 238 # UL/FM approved. Other flange drillings on request Valves and hydrants for fire protection 59

The grooved systems end clamping systems series 0 6/37 AVK gate valves with grooved ends The series 06/37 AVK gate valve with grooved ends is the perfect valve choice in pipelines for irrigation, HVAC, and fire protection. The valves fit the quick clamp system and are machined according to AWWA C606. The grooved end on the valve is fixed to the pipe material e.g. steel or cast iron - by means of standard clamping couplings. Over the past 75 years, the grooved end clamping system has proved to be one of the fastest and most efficient ways of joining pipes due to its high degree of flexibility and rigidity, as well as a fast and easy assembly. The system is a fast and effective way to install pipe systems in buildings. The system absorbs vibrations and noise transmission through the system. It has a certain degree of angular deflection of the pipe joints and alignment in all positions 360º around the pipe axis. Therefore, the system has gained a footing in high rise buildings where vibrations and stress of pipe systems are of significant importance. The series 06/37 valve is a further development of the well-known VDS-approved gate valve series 06/35 which was originally designed for sprinkler systems. This industry has recognised the time saving and effective way to connect pipes and fittings. Valves and hydrants for fire protection 61

AVK GROOVED END GATE VALVE, PN 16, CTC 06/37 003 Gate valve with grooved ends and pin indicator according to AWWA C 606, for fire protection application to max. 70 C, designed according to DIN/EN, Face to face according to EN 558 table 2 basic series 14. Hydraulic test according to VdS. Approved according to VdS Certificate No. G 4070046. Resilient seated gate valve to EN 1074-1 and 2 / EN 1171. Body and bonnet of GJS-500-7 (GGG-50). Wedge of ductile iron fully vulcanized with EPDM rubber and with fixed brass wedge nut. Stem of stainless steel min. 13% Cr with rolled thread and wedge stop ring. Stem sealing with 4 O-rings in a nylon bearing, an EPDM rubber manchette and a NBR wiper ring. EPDM bonnet gasket in a groove, countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt. Pin of stainless steel, indicator nut of dezincification resistant brass and handwheel of cast iron. Epoxy coating to AVK coating standard - internally and externally. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 62 Valves and hydrants for fire protection

AVK GROOVED END GATE VALVE, PN 16, CTC 06/37 003 W 1 2 3 4 A. Stem sealing Three independent stem seals offering triple safety: A NBR wiper ring protects against dirt from outside. A polyamid bearing with 4 NBR O-rings protects against galvanic corrosion. An EPDM rubber manchette sealing acts as the main hydraulic seal to the flow. H A B 5 6 7 8 9 10 11 B. Body/bonnet connection The unique assembly of the valve body and bonnet ensures a durable tightness: A round rubber bonnet gasket fits into a recess in the valve bonnet preventing it from being blown out by pressure surges. The stainless steel bonnet bolts are countersunk in the valve bonnet, encircled by the bonnet gasket and sealed with hot melt. Thus there is no risk of corrosion as the bolts are not exposed to the medium or soil. C B DG D 12 13 14 15 C. Wedge nut The fixed, integral wedge nut reduces the number of movable valve parts thus minimizing the risk of corrosion and malfunction. The wedge nut is made of dezincification resistant brass with lubricating abilities providing optimum compatibility with the stainless steel stem. Component list 1. Handwheel 2. Stem 3. Pin 4. Indicator nut 5. NBR Wiper ring 6. NBR O-ring 7. Plastic bearing 8. Bonnet 9. Thrust collar 10. Rubber manchette 11. Bonnet bolt 12. Bonnet gasket 13. Wedge nut 14. Wedge 15. Body L D A D. Vulcanized wedge The ductile iron core is fully vulcanized with drinking water approved EPDM rubber internally and externally. No iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber. Guides in the wedge and on the valve body ensure a uniform closure regardless of high pressure. Safe operation is ensured, as the guides prevent overloading of the stem. The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities cannot collect and cause contamination. Reference nos. and dimensions AVK ref. nos. DN L H A B D DG W Theoretical weight kg 06-050-37-09620 50 178 329 16 8 60 57 180 10 06-080-37-09620 80 203 382 16 8 89 85 225 15 06-100-37-09620 100 229 414 16 10 114 110 280 22 06-150-37-09620 150 267 540 16 10 168 164 320 44 06-200-37-09620 200 292 688 19 11 219 214 360 61 06-250-37-09620 #) 250 330 780 19 13 273 268 500 94 06-300-37-09620 #) 300 356 855 19 13 324 318 500 126 # Not approved to VdS Valves and hydrants for fire protection 63

But ter fly valves series 75 and check valves series 41 and series 53 AVK butterfly valves AVK offers butterfly valves in three different variants wafer, semi lug and double flanged. All three variants have a ductile iron body, PN 16, with vulcanized rubber liner from AVK s own rubber factory. The rubber liner functions as a shut-off for the fire water and as an insertion joint against the counter flanges. This function eases the installation process significantly. The disc is made of stainless steel or alubronze in a modern and optimized design to ensure a free flow. All butterfly valves are delivered with approved gear box, hand wheel and opening indicator. AVK check valves Secondary valves in a fire sprinkler system are not necessarily gate valves. The AVK check valve is an excellent choice if you want to avoid reflux. A pump chamber for sprinkler systems often includes liquids that are not in contact with fire water and as such, they do not require the same strict approvals. Examples hereof are the supplementary water for the pumps and the replenishment of containers and reservoirs from the public water supply net. Such liquids are handled excellently with AVK ball check valves, series 53, or AVK swing check valves, series 41. The ductile iron body, made in a modern design with soft sealing elements in an advanced rubber quality from AVK s own rubber factory, will ensure an efficient shut-off whenever needed. Valves and hydrants for fire protection 65

AVK BUTTERFLY VALVE, WAFER, PN 10 OR 16 75/11 037 Butterfly valve to EN 593, for fire protection application to max. 70 C, designed according to DIN/EN, face to face according to EN 558 table 5 basic series 20. End connection to EN 1092-2 PN 6/10/16, ASME B16.5 Cl. 150 Hydraulic test according to FM. Approved according to FM. Concentric wafer butterfly valve with fixed EPDM rubber lining. Body of ductile iron JL1030/GJS-400-15 (GGG-40). Disc, shaft and conical pin of stainless steel 1.4057. Top and bottom bearings of steel with PTFE coating. The shaft is sealed at the top by means of a bronze bushing with 2 EPDM O-rings and at the bottom by a plug of galvanized steel 8.8 with a copper sealing ring. Mounted with a handwheel-operated cast iron gear box including indicator plate and locking device. Epoxy coated red RAL 3000. Accessories: Combi-flange AVK series 05, flange adaptors AVK series 603, 623 and 52/260 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 66 Valves and hydrants for fire protection

AVK BUTTERFLY VALVE, WAFER, PN 10 OR 16 75/11 037 W1 DN 65-125: DN 150-200: DN 250-300: 232 242 332 1 2 3 4 5 ISO Flange F2 H1 Concentric design with fixed liner The concentric design enables mounting without any restriction as to the direction of the flow. The compact design and low weight offer easy handling, the streamlined disc shape ensures minimum turbulence and head loss, and the low torques ease operation and allow smaller actuators. The benefits of a fixed liner design are: No corrosion between body and liner No balloon effect in open position No deformation of the liner Longer life in general 6 7 8 9 10 11 H2 12 L Component list 1. Shaft 2. Bushing 3. O-ring 4. Body 5. Bearing 6. Conical pin 7. Disc 8. Shaft 9. Lining 10. Bearing 11. Sealing ring 12. Plug Reference nos. and dimensions AVK ref. nos. DN Prod. PN L H1 H2 F2 ISO flange Theoretical weight kg 75-0050-102022026001 50 16 43 118 63 34 90 2,6 75-0065-102022026001 65 16 46 126 71 34 90 3,2 75-0080-102022026001 80 16 46 133 78 34 90 3,5 75-0100-102022026001 100 16 52 147 98 34 90 4,5 75-0125-102022026001 125 16 56 160 109 34 90 6,3 75-0150-102022026001 150 16 56 180 133 34 90 8,8 75-0200-102022026001 200 16 60 204 158 34 90 14 75-0250-102022023001 250 10 68 245 194 45 125 22 75-0250-102022026001 250 16 68 245 194 45 125 22 75-0300-102022023001 300 10 78 270 219 45 125 32 75-0300-102022026001 300 16 78 270 219 45 125 32 Valves and hydrants for fire protection 67

AVK BUTTERFLY VALVE, SEMI LUG, PN 10 OR 16 75/31 023 Butterfly valve to EN 593, for fire protection application to max. 70 C, designed according to DIN/EN, face to face according to EN 558 table 5 basic series 20. End connection to EN 1092-2 PN 10/16 Hydraulic test according to VdS. Approved according to VdS regulations. Concentric semi lug butterfly valve with fixed NBR rubber lining. Body of ductile iron JL1030/GJS-400-15 (GGG-40). Shaft of stainless steel AISI 431, and disc and conical pin of alubronze. Top and bottom bearings of steel with PTFE coating. The shaft is sealed at the top by means of a bronze bushing with 2 EPDM O-rings and at the bottom by a plug of galvanized steel 8.8 with a copper sealing ring. Mounted with a handwheel-operated cast iron gear box including position indicator. Epoxy coated red RAL 3000. Accessories: Combi-flange AVK series 05, flange adaptors AVK series 603, 623 and 52/260 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 68 Valves and hydrants for fire protection

AVK BUTTERFLY VALVE, SEMI LUG, PN 10 OR 16 75/31 023 W1 DN 65-125: DN 150-200: DN 250-300: 232 242 332 1 2 3 4 5 ISO Flange L5 F2 H1 Concentric design with fixed liner The concentric design enables mounting without any restriction as to the direction of the flow. The compact design and low weight offer easy handling, the streamlined disc shape ensures minimum turbulence and head loss, and the low torques ease operation and allow smaller actuators. The benefits of a fixed liner design are: No corrosion between body and liner No balloon effect in open position No deformation of the liner Longer life in general 6 7 8 9 10 11 H2 12 L Component list 1. Shaft 2. Bushing 3. O-ring 4. Body 5. Bearing 6. Conical pin 7. Disc 8. Shaft 9. Lining 10. Bearing 11. Sealing ring 12. Plug Reference nos. and dimensions AVK ref. nos. DN Prod. PN L L5 H1 H2 F2 ISO flange Theoretical weight kg 75-0050-30-2142026001 50 16 43 12 118 63 34 90 2,8 75-0065-30-2142026001 65 16 46 12 126 71 34 90 3,6 75-0080-30-2142026001 80 16 46 12 133 78 34 90 3,9 75-0100-30-2142026001 100 16 52 12 147 98 34 90 5,1 75-0125-30-2142026001 125 16 56 12 160 109 34 90 7,0 75-0150-30-2142026001 150 16 56 14 180 133 34 90 9,5 75-0200-30-2142026001 200 16 60 14 204 158 34 90 14 75-0250-30-2142013001 250 10 68 15 245 194 45 125 24 75-0250-30-2142026001 250 16 68 15 245 194 45 125 24 75-0300-30-2142013001 300 10 78 15 270 219 45 125 36 75-0300-30-2142026001 300 16 78 15 270 219 45 125 36 Valves and hydrants for fire protection 69

AVK BUTTERFLY VALVE, DOUBLE FLANGED SHORT, PN 10 OR 16 75/41 023 Butterfly valve to EN 593, for fire protection application to max. 70 C, designed according to DIN/EN, Face to face according to EN 558 table 4 basic series 13. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic test according to FM. Approved according to FM. Concentric double flanged (short) butterfly valve with fixed NBR rubber lining. Body of ductile iron JL1030/GJS-400-15 (GGG-40). Shaft, disc and conical pin of duplex steel, optionally shaft of stainless steel AISI 431 and disc/conical pin of alubronze. Top and bottom bearings of steel with PTFE coating. The shaft is sealed at the top by means of a bronze bushing with 2 EPDM O-rings and at the bottom by a plug of galvanized steel 8.8 with a copper sealing ring. Mounted with a handwheel-operated cast iron gear box including indicator plate. Epoxy coated red RAL 3000. Accessories: Combi-flange AVK series 05, flange adaptors AVK series 603, 623 and 52/260 For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 70 Valves and hydrants for fire protection

AVK BUTTERFLY VALVE, DOUBLE FLANGED SHORT, PN 10 OR 16 75/41 023 W1 DN 65-125: DN 150-200: DN 250-300: 232 242 332 1 2 3 4 ISO Flange L5 F2 Concentric design with fixed liner The concentric design enables mounting without any restriction as to the direction of the flow. The compact design and low weight offer easy handling, the streamlined disc shape ensures minimum turbulence and head loss, and the low torques ease operation and allow smaller actuators. The benefits of a fixed liner design are: No corrosion between body and liner No balloon effect in open position No deformation of the liner Longer life in general 5 6 H1 7 8 9 10 11 H2 12 L Component list 1. Shaft 2. Bushing 3. O-ring 4. Body 5. Bearing 6. Conical pin 7. Disc 8. Shaft 9. Lining 10. Bearing 11. Sealing ring 12. Plug Reference nos. and dimensions AVK ref. nos. DN Prod. PN PN drilling L L5 H1 H2 F2 ISO flange Theoretical weight kg 75-0050-202122026001 #) 50 16 16 108 12 118 63 34 90 8,0 75-0065-202122026001 #) 65 16 16 112 12 126 71 34 90 9,0 75-0080-202122026001 #) 80 16 16 114 12 133 78 34 90 11 75-0100-202122026001 #) 100 16 16 127 12 147 98 34 90 13 75-0125-202122026001 #) 125 16 16 140 12 160 109 34 90 17 75-0150-202122026001 #) 150 16 16 140 14 180 133 34 90 23 75-0200-202122013001 #) 200 10 10 152 14 204 158 34 90 32 75-0200-202122026001 #) 200 16 16 152 14 204 158 34 90 32 75-0250-202122013001 #) 250 10 10 165 15 245 194 45 125 50 75-0250-202122026001 #) 250 16 16 165 15 245 194 45 125 50 75-0300-202122013001 #) 300 10 10 178 15 270 219 45 125 65 75-0300-202122026001 #) 300 16 16 178 15 270 219 45 125 65 # Disc material in Duplex Valves and hydrants for fire protection 71

AVK SWING CHECK VALVE, PN 10/16 41/60 003 Swing check valve with free shaft end, for water and sewage to max. 70 C, designed according to DIN/EN, Face to face according to EN 558 table 2 basic series 48. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic test according to EN12050-4. Approved according to LGA regulations. Resilient seated with full bore. Body and bonnet of GJS-500-7 (GGG-50). Hinge of stainless steel AISI 316 in DN 50-200 and GGG-50 in DN 250-300. Disc with steel insert fully vulcanized with EDPM rubber. The disc and hinge are assembled on a shaft of stainless steel AISI 430F fitted in the bonnet. Bonnet gasket of EPDM rubber in a groove between body and bonnet. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Accessories: Lever and weight AVK series 41/23, lever and spring AVK series 41/32, valve guard kit AVK series 41/50, combi-flanges AVK series 05, flange adaptors AVK series 603 and 623. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 72 Valves and hydrants for fire protection

AVK SWING CHECK VALVE, PN 10/16 41/60 003 1 2 3 4 5 6 7 8 9 10 Low head loss The full bore minimizes pressure loss and allows maximum utilisation of the pump capacity. The disc is designed with a steel insert fully vulcanized with EPDM rubber. It provides a drop tight closure and due to the light weight it requires a minimum of force to open/close. H Easy maintenance and long life Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts and removing the bonnet assembly including hinge and disc. In case of damage the necessary spare parts can be changed before reassembly. The valve is easy to handle due to its low weight. The hinge is designed with double keyways and is tightened around the shaft with bolts to eliminate play and thus preventing wear of the components. The resilient seated disc features optimum corrosion resistance. 11 12 13 14 15 L Component list 1. Washer 2. Nylon spacer 3. Bolt 4. Disc 5. Washer 6. Hexagon bolt 7. Hinge 8. Bonnet 9. Bonnet gasket 10. Body 11. O-ring 12. O-ring 13. Bushing 14. Pin 15. Shaft W1 Reference nos. and dimensions AVK ref. nos. DN PN drilling L H W1 Theoretical weight kg 41-050-60-018 50 10/16 200 110 160 13 41-065-60-018 65 10/16 216 140 160 17 41-080-60-018 80 10/16 260 140 160 20 41-100-60-018 100 10/16 300 150 175 26 41-125-60-018 125 10/16 350 195 220 40 41-150-60-018 150 10/16 400 195 220 51 41-200-60-008 200 10 500 230 240 83 41-200-60-018 200 16 500 230 240 83 41-250-60-008 250 10 600 270 415 183 41-250-60-018 250 16 600 270 415 183 41-300-60-008 300 10 700 300 415 231 41-300-60-018 300 16 700 300 415 231 Valves and hydrants for fire protection 73

AVK THREADED BALL CHECK VALVE, PN 10 53/30 005 Ball check valve in ductile iron with BSP thread, for sewage and neutral liquids to max. 70 C, designed according to DIN/EN, face to face according to DIN 3202 - F6. Hydraulic test according to EN12050-4. Approved according to LGA regulations. Ball check valve designed according to EN 12050-4. Body and cover of ductile iron GJS-400-15 (GGG-40). Ball of aluminium, vulcanized with NBR rubber. Bolts and nuts of stainless steel A2 and cover gasket of NBR rubber. Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 74 Valves and hydrants for fire protection

AVK THREADED BALL CHECK VALVE, PN 10 53/30 005 1 2 3 4 5 BSP H Features The valve design features 100% free flow as the ball does not appear in the valve flow path when in open position. The straight bore prevents deposits in the valve. Consequently the AVK ball check valves feature a very low pressure loss giving the benefits of optimum use of pump capacity. Tightness is secured when installed both vertically and horizontally, even at very low counter pressure. At horizontal installation the ball will be placed in almost closed position, as the valve body supports the ball against the seat. The ball is rotating during operation thus giving a self-cleaning function and minimum wear of the rubber. The rubber hardness is carefully defined to prevent the ball from getting stuck in the seat. Pressure loss in cm H2O DN 32 L DN 40 The check valves are optionally available with different ball weights and balls of solid PUR in standard weights. DN 50 L/S L/S Component list 1. Cover 2. Bolt/nut/washer 3. Gasket 4. Body 5. Ball L/S Reference nos. and dimensions AVK ref. nos. DN Prod. PN L H Theoretical weight kg 53-032-30-9007 32 10 140 83 2,0 53-040-30-9007 40 10 140 83 2,0 53-050-30-9007 50 10 180 101 3,0 Valves and hydrants for fire protection 75

AVK THREADED BALL CHECK VALVE, PN 10 53/40 005 Ball check valve in stainless steel with BSP thread, for sewage and neutral liquids to max. 70 C, designed according to DIN/EN, face to face according to DIN 3202 - F6. Hydraulic test according to EN12050-4. Approved according to LGA regulations. Ball check valve designed according to EN 12050-4. Body and cover of stainless acid resistant steel AISI 316. Ball of aluminium, vulcanized with NBR rubber. Bolts and nuts of stainless steel A2 and cover gasket of NBR rubber. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 76 Valves and hydrants for fire protection

AVK THREADED BALL CHECK VALVE, PN 10 53/40 005 DN 32 DN 40 DN 50 Pressure loss in cm H2O Features The valve design features 100% free flow as the ball does not appear in the valve flow path when in open position. The straight bore prevents deposits in the valve. Consequently the AVK ball check valves feature a very low pressure loss giving the benefits of optimum use of pump capacity. Pressure loss in cm H2O L/S DN 65 L/S Component list L/S DN 80 L/S L/S Tightness is secured when installed both vertically and horizontally, even at very low counter pressure. At horizontal installation the ball will be placed in almost closed position, as the valve body supports the ball against the seat. The ball is rotating during operation thus giving a self-cleaning function and minimum wear of the rubber. The rubber hardness is carefully defined to prevent the ball from getting stuck in the seat. The check valves are optionally available with different ball weights and balls of solid PUR in standard weights. 1. Cover 2. Bolt/nut/washer 3. Gasket 4. Body 5. Ball 1 2 3 4 5 H BSP L Reference nos. and dimensions AVK ref. nos. DN Prod. PN L H Theoretical weight kg 53-032-40-9090 32 10 140 83 2,0 53-040-40-9090 40 10 140 83 2,0 53-050-40-9090 50 10 180 101 3,0 53-065-40-9090 65 10 245 140 7,0 53-080-40-9090 80 10 260 140 7,0 Valves and hydrants for fire protection 77

Accessories for hydrants and valves A wide range of accessories helps completing the wide product package from AVK. It is crucial that products can be repaired quickly and efficiently without any down time. Maintenance and repair shall be completed without the use of special tools. Besides repair kits for our hydrants, AVK has a number of accessories, such as extension spindles, street covers and different stem caps, which supplements and completes our high quality valves and hydrants. Valves and hydrants for fire protection 81

MICRO SWITCH WITH BRACKET FOR OS&Y VALVES 96/00 001 Fire fighting components, designed according to DIN/EN. Micro switch for monitoring the position of OS&Y (outside screw and yoke) type gate valves from 2" to 12". The device contains two sets of SPDT (form C) contacts. The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device and must be kept available. FM approved. UL listed. Testing: The micro switch and its associated protective monitoring system should be inspected and tested in accordance with applicable NFPA codes and standards and/or the authority having jurisdiction. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 82 Valves and hydrants for fire protection

LIMIT SWITCH I 88 WITH BRACKET FOR NRS VALVES 96/00 002 Fire fighting components, designed according to DIN/EN. Micro switch for monitoring the position of NRS (non rising stem) type gate valves. Snap action device with one NC/NO change over contact. Max. voltage 500V, max constant current 10A. Protection class IP 65. UL listed. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S Valves and hydrants for fire protection 83

LIMIT SWITCH BI 2 96/00 003 Fire fighting components, designed according to DIN/EN. Micro switch for monitoring the position of NRS (non rising stem) type gate valves. Snap action device with one NC/NO change over contact. Max. voltage 500V, max constant current 10A. Four different mounting holes. Protection class IP 65. Two cable entries M 16 x 1,5. UL listed. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 84 Valves and hydrants for fire protection

AVK TOOL KIT FOR DRY/WET BARREL HYDRANTS 2X/30 Use: Tool kit for weathershield operating nut, caps and seat removal Same kit for all types of AVK Dry/Wet Barrel Hydrants Materials: Seat wrench Steel Operating wrench Ductile iron Coating Fusion bonded epoxy coating. S.27 S.27 S.24 The designs, materials and specifications shown are subject to change without notice due our continuing prograe of product development. AVKSVMC 1/2 09.09.2013-MMH Previous Rev. 08.06.2011-MLJ

AVK TOOL KIT FOR DRY/WET BARREL HYDRANTS 2X/30 Component list 1. Seat wrench 2. Operating wrench S.27 3. Operating wrench S.24 1 2 3 L1 L1 L1 L2 # - Series Weight Ref. nos. Content L1 L2 Lbs 1. 27 2. 27 3. 24 27-150-30-100 Seat wrench 27-150-30-400 Operating wrench 24-150-30-4001 Operating wrench 20 3/4 " 15" 6 17 3/4 " 4 3/2 15" 3.3 The designs, materials and specifications shown are subject to change without notice due our continuing prograe of product development. AVK SVMC 2/2 09.09.2013-MMH Previous Rev. 08.06.2011-MLJ

TRAFFIC REPAIR KIT 27/00 004 Fire hydrant modern type to AWWA C502, designed according to DIN/EN. Traffic repair kit for easy repair of a broken away AVK series 27 hydrant. Breakable flange in ductile iron. Breakable stem rod coupling in stainless steel with pins and lock rings in stainless steel. Bolts, nuts and washers in zink plated steel. Standpipe gasket in nitrile rubber with stainless steel insert. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 86 Valves and hydrants for fire protection

TRAFFIC REPAIR KIT 27/00 004 Component list 1. Bolt and nut 2. Standpipe gasket 3. Lock ring 4. Breakable flange 5. Stem rod coupling 6. Pin w/spring pin Reference nos. and dimensions AVK ref. nos. DN H3 H5 L Theoretical weight kg 27-150-75-1001 #) 150 0 0 0 5,0 27-150-75-2001 ##) 150 0 0 0 5,0 # Bolts & nuts in galvanized steel grade 8.8 ## Bolts & nuts in stainless steel Valves and hydrants for fire protection 87

AVK T-KEY 04/15 001 T-key for below ground gate valves with stem cap or extension spindle, designed according to DIN/EN. Mild steel with exoxy coating. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 88 Valves and hydrants for fire protection

AVK T-KEY 04/15 001 W H3 F1 Reference nos. and dimensions AVK ref. nos. DN/DN H3 W Theoretical weight kg 04-050-2000 #) 50-125 800 480 2,2 04-050-2100 ##) 50-400 800 700 2,7 # Square F1 #14 x #22 ## Square F1 #23 x #32 Valves and hydrants for fire protection 89

AVK HANDWHEEL FOR FIRE PROTECTION 08/00 011 Handwheel for service connection valves and gate valves, designed according to DIN/ EN. Handwheel of grey cast iron, GJL-250 (GG-25) with epoxy coating to DIN 30677. Bolt and washer of zinc coated steel 8.8. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 90 Valves and hydrants for fire protection

AVK HANDWHEEL FOR FIRE PROTECTION 08/00 011 D 1 F 3 2 Component list 1. Handwheel 2. Washer 3. Bolt Reference nos. and dimensions AVK ref. nos. DN/DN D F Theoretical weight kg 08-050-01-200 40-50 180 14 1,5 08-080-02-200 65-80 225 17 2,0 08-100-01-200 100-100 280 19 3,5 08-150-02-200 125-150 320 19 4,5 08-200-01-200 200-200 320 19 6,0 08-250-02-200 250-300 500 27 11 Valves and hydrants for fire protection 91

STEM CAP FOR AWWA VALVES 04/24 001 Stem cap for AWWA valves, designed according to DIN/EN. Stem caps for gate valves and extension spindles. Grey cast iron GJL-250 (GG-25). Epoxy coated to AVK standard min 150 micron. For further details see section "Technical Information". The designs, materials, and specifications shown are subject to change without notice due to the continuous development of our product prograe. 2010-07-05 15:06 CET COPYRIGHT AVK GROUP A/S 2010 / AVK INTERNATIONAL A/S 92 Valves and hydrants for fire protection

STEM CAP FOR AWWA VALVES 04/24 001 f1 Reference nos. and dimensions AVK ref. nos. DN/DN F F1 Theoretical weight kg 04-100-11000 100-100 19 51 1,0 04-200-11000 150-150 24 51 1,1 04-250-11000 200-300 27 51 1,2 Valves and hydrants for fire protection 93

Check valve for firehose cabinets Type 290 Components: 1. Body 2. Cartridge 3. O-ring 94 Valves and hydrants for fire protection

Check valve with inspection plug Type 2290 Valves and hydrants for fire protection 95

The best hydrant - is the one you can forget about 96 Valves and hydrants for fire protection

Technical appendix Flanges: Gate valves acc. to DIN - raised face, F4 building length Dh ds Number D Dt df dr of holes Bolt size DN PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 50 165 102 125 16 3 19 4 M16 65 185 122 145 16 3 19 4 M16 80 200 138 160 16 3 19 8 M16 100 220 158 180 16 3 19 8 M16 125 250 188 210 16 3 19 8 M16 150 285 212 240 16 3 23 8 M20 200 340 268 295 295 17 3 23 23 8 12 M20 M20 250 400 320 350 355 19 3 23 28 12 12 M20 M24 300 455 370 400 410 21 4 23 28 12 12 M20 M24 350 520 430 460 470 23 4 23 28 16 16 M20 M24 400 575 482 515 525 28 4 28 31 16 16 M24 M27 450 640 535 565 585 28 4 28 31 20 20 M24 M27 500 715 590 620 650 28 4 28 34 20 20 M24 M30 600 840 685 725 770 29 5 34 37 20 20 M27 M33 dr DN Dt Dh D ds df Flanges: Gate valves acc. to AW WA, flat face ASME B16.1 / 16.5 Dh ds Number D df dr of holes Bolt size DN cl. 125/150 cl. 125/150 cl. 125/150 cl. 125/150 50 152 121 15,8 3 19 4 M16 65 178 140 17,5 3 19 4 M16 80 191 152 19,1 3 19 4 M16 100 229 191 23,9 3 19 8 M16 150 297 241 25,4 3 22,2 8 M20 200 343 298 28,5 3 22,2 8 M20 250 406 362 30,2 3 25,4 12 M24 300 483 432 31,8 4 25,4 12 M24 350 533 476 35,1 4 28,6 12 M27 400 597 540 36,6 4 28,6 16 M27 450 635 578 39,6 4 33 16 M30 500 699 635 42,9 4 33 20 M30 600 813 749 47,8 5 36 20 M33 dr DN Dt Dh D ds df Valves and hydrants for fire protection 97

Technical appendix - flow/pressure loss Serie 27 - flow/pressure loss 27/80 - Nostalgic hydrant 1 x hose (2,5") = 223 m³/hour 1 x pumper (4") = 475 m³/hour 1 x pumper (4,5") = 494 m³/hour 27/00 - Modern hydrant 1 x hose (2,5") = 212 m³/hour 1 x pumper (4") = 450 m³/hour 1 x pumper (4,5") = 470 m³hour Monitor with MZ 2000 Diagram valid for nominal flow 2700 lpm at operating pressure 16 bar 70 height of throw [m] 60 50 40 30 elevation 30 elevation 40 elevation 60 elevation 75 20 10 0 0 10 20 30 40 50 60 70 range of throw [m] Diagram only valid for calm conditions and position jet of the nozzle 98 Valves and hydrants for fire protection

Technical appendix - flow/pressure loss Monitor with SM-1250 series nozzel elevation 32 elevation 55 elevation 75 Valves and hydrants for fire protection 99

AVK is cer tified according to ISO 9 0 01, ISO 14001, and OHSAS 18001 AVK focuses on the environment AVK recognises the dangers of environmental impact also from a global point of view. AVK products are part of the infrastructure and as such they are an important part of the environment. Therefore, we constantly work on reducing this impact and seek to identify areas of improvement not only in our production processes but also in relation to our suppliers. At our factories and in all processes AVK works systematically on: always complying with environmental and work environmental legislation and other relevant requirements from authorities. reducing the amount of waste within the company. Where possible we recycle waste materials from production or alternatively apply the most environmentally friendly waste disposal methods. minimizing the consumption of energy and raw materials. minimizing the use of materials and processes which may be hazardous to the external environment or the work environment. informing and educating employees, enabling them to act in accordance with our environmental objectives and thereby contribute to minimising environmental hazard. taking environmental factors into consideration when choosing suppliers. advising customers on the use and disposal of our products. continuous improvement on prevention of pollution. AVK INTERNATIONAL A/S Bizonvej 1, Skovby DK-8464 Galten, Denmark Tel.: +45 87 54 21 00 Fax: +45 87 54 21 20 E-mail: sales@avk.dk www.avkvalves.com 41fireBB/2010-06-23 Copyright AVK Group A/S 2010