E36 Pressure Tanks Pressure Tanks - Steel For use wherever pressurized tanks are needed in water system applications Controlled water cell Heavy duty gauge steel construction Warranty: 5 year limited Total Volume Gal L Precharge psi Max psi Connection Size Diameter X Height/Length (In.) Drawdown 20-40 30-50 40-60 Gal L Gal L Gal L Horizontal Tanks Part Number 5.3 20 28 125 3/4" 11.4 x 17.5 1.9 7.3 1.6 6.2 1.4 5.4 Jet-Rite PJR20S 8.5 32 28 125 3/4" 12.5 x 17 3.1 11.7 2.6 9.8 2.3 8.7 Jet-Rite PJR25S 14 53 28 125 1" 16.3 x 20.8 5.1 19.3 4.3 16.4 3.8 14.2 Jet-Rite PJR44S Above horizontal pressure tanks come with pump mounting bracket Vertical Tanks 2.1 8 28 125 3/4" 8 x 12 0.8 2.9 0.7 2.5 0.6 2.1 Jet-Rite PJR6 4.8 18 28 125 3/4" 11 x 14.5 1.7 6.6 1.5 5.6 1.3 4.8 Jet-Rite PJR15 14 60 38 125 1" 16 x 22 5.6 21.35 4.8 18.1 4.1 15.6 Well-Rite WR45R 20 80 38 125 1" 16 x 29 8.1 30.51 6.8 25.8 5.9 22.3 Well-Rite WR60R 26 100 38 125 1" 16 x 34.5 10.5 39.66 8.9 33.6 7.7 29.0 Well-Rite WR80R 32 120 38 125 1 1/4" 21 x 27.75 12.9 48.81 10.9 41.3 9.4 35.7 Well-Rite WR100R 33 130 38 125 1" 16 x 42.75 13.3 50.34 11.3 42.6 9.7 36.8 Well-Rite WR120R 44 170 38 125 1 1/4" 21 x 36.25 17.7 67.12 15 56.8 13 49.1 Well-Rite WR140R 62 240 38 125 1 1/4" 21 x 48 25 94.57 21.1 80 18.3 69.2 Well-Rite WR200R 81 310 38 125 1 1/4" 21 x 62 32.6 123.6 27.6 104.5 23.9 90.4 Well-Rite WR240R 85 325 38 125 1 1/4" 26 x 44.5 34.3 129.7 29 109.7 25.1 94.9 Well-Rite WR260R 119 450 38 125 1 1/4" 26 x 59.75 48 181.5 40.6 153.6 35.1 132.9 Well-Rite WR360R PJR Series WR Series
E36-1 Pressure Tanks Pressure Tanks VFD - Steel & Stainless Designed specifically for Variable Frequency Drive (Constant Pressure) Assures total recirculation of the tank s water content within 50 gallons of system demand Stainless steel construction FT 8, 18, 18S Steel construction FT 66, 144, 244 Warranty: 5 year limited FT 66, 144, 266 Total Volume Diameter X Height/ Length (In.) Drawdown Pre-charge Max Connection Vertical or Part psi psi Size 20-40 30-50 40-60 Horizontal Number Gal L Gal L Gal L Gal L 2.1 7.9 35 125 1" 8 x 12 1 3.8 Vertical Flow-Thru FT8 4.5 17 35 125 1" 11 x 13.25 2 7.6 Vertical Flow-Thru FT18 4.5 17 35 125 1" 11 x 13.25 2 7.6 Either Flow-Thru FT18S 20 75.7 35 125 1-1/4" 16 x 29 6.8 25.7 5.89 22.3 Vertical Flow-Thru FT66 44 166.6 35 125 1-1/4" 21 x 36.25 15 56.8 13 49.2 Vertical Flow-Thru FT144 85 321.8 35 125 1-1/4" 26 x 44.5 29 109.8 25.1 95 Vertical Flow-Thru FT266 5.0 18.9 30 206.8 3/4 NPTM 10.6x16.2 2.2 8.33 1.8 6.8 1.8 6.8 Vertical ProSource PS5-S02 Pressure Tanks Storage Multiport - Composite (Air Over) Non-Corrosive, Scratch-Resistant, Lightweight FLS Composite Storage Tank Double Port With a rugged base engineered to withstand maximum loads and extreme environmental conditions 5 Year Warranty on Flex Tanks Total Tank A B C D E F Total Volume Height Floor to CL Diameter CL to Floor CL to Floor G Socket glue Weight FPT connection gal litres in cm in cm in cm in cm in cm lbs kg Part Number 40 151 53.4 135.6 1.75 4.4 16.5 41.9 15.5 39.4 28.5 72.4 1 1/4 schd-80 1 1/4 31.0 14.1 FLS40D 80 310 64.1 162.8 2.25 5.7 21.4 54.4 18.3 46.5 34.1 86.6 1 1/4 schd-80 1 1/4 60.0 27.2 FLS80D 120 450 71.5 181.6 2.25 5.7 24.2 61.5 20.2 51.3 37.8 96.0 1 1/4 schd-80 1 1/4 83.5 37.9 FLS120D
E37 Pressure Tanks Pressure Tanks - Fibrewound For use on a wide range of fresh water needs Vertical tanks Chlorine resistant butyl diaphragm Fibreglass wound outer shell coated with epoxy resin Rigid Schedule 80 PVC connection and brass air valve with o-ring seal Warranty: 5 year limited Total Tank Volume A Height B Floor to CL Composite Tank Dimensions C Diameter D CL to fitting end E Connection Total Weight Part Number gal litres in cm in cm in cm in cm lbs kilos 15 56.8 25.6 64.0 1.75 4.4 16.5 41.9 9.4 23.9 1 NPT 19.0 8.6 FL5 22 83.3 34.1 84.1 1.75 4.4 16.5 41.9 9.4 23.9 1 NPT 24.0 10.9 FL7 35 132.5 48.9 121.7 1.75 4.4 16.5 41.9 9.4 23.9 1 NPT 33.5 15.2 FL12 38 143.8 29.75 74.7 2.25 5.7 24.2 61.5 11.9 30.2 1 1/4 sch 80 38.0 15.9 FL13SQ 50 189.3 43.3 109.0 2.25 5.7 21.4 54.4 11.9 30.2 1 1/4 NPT 47.0 21.3 FL17 65 246.0 51.3 129.3 2.25 5.7 21.4 54.4 11.9 30.2 1 1/4 NPT 58.0 26.3 FL22 82 310.4 64.7 163.3 2.25 5.7 21.4 54.4 11.9 30.2 1 1/4 NPT 69.5 31.5 FL28 90 340.7 57.0 143.8 2.25 5.7 24.2 61.5 13.4 34.0 1 1/4 NPT 77.0 34.9 FL30 119 450.4 72.1 182.1 2.25 5.7 24.2 61.5 13.4 34.0 1 1/4 NPT 99.5 45.1 FL40
E38 Aqua Genie - Constant Pressure Valve Starts pump on demand and runs continuously as long as service is needed Automatically controls pump operations Provides constant pressure throughout house regardless of number of faucets in operation Eliminates pressure fluctuations, water logging & flat tasting water Designed for pumps developing up to 80 psi Enclosure Max Operating Pressure Threaded Connections Plastic 80 psi 1" NPT Jacuzzi Part Number 9198-7321 (AQ80) Mascontrol - Constant Pressure Valve Automatically controls pump operations Turns the pump on at approximately 30 psi Eliminates pressure tank & switch Dual voltage: 115/230V, single phase For use with electric pumps, surface or submersible, in residential & commercial systems Built-in check valve & run-dry sensor Includes a hydraulic section & electronic control box NEMA 12 enclosure Amp Max Operating Connections Part Volts / Hz Rating Pressure Threaded Electrical Conduit Number 115V/230V / 50-60 155V-16FLA / 230V-20FLA 145 psi 1" NPT 1/2" Duro 79983
E39 Air Charger Kit Designed to prevent water logging typically associated with a conventional galvanized pressure tank Automatically maintains a proper balance of air and water volume in the tank Eliminates frequent starts and stops, thus extending motor life and reducing power consumption Eliminates tank draining normally required with water logged tanks Eliminates need for other costly equipment Kit Includes Part Number Air charger, reducer bushing, adapter nut, 3/8" polyethylene tubing and male connector Jacuzzi 106594901 (225A) Air Volume Control For use in jet systems that cures waterlogged tanks Will operate on as little as 5" of vacuum Plastic, will not corrode in moist environment May be easily manifolded for larger size tanks Supply Tank Part Number Max. 82 gallons Boshart AVCP Air Volume Control - Non-Repairable For use on jet, centrifugal and rotary pumps Designed to balance air and water in a water pressure system Prolongs pump life AV45 has brass spring and orifice AV100 incorporates a ball check valve for universal use on tank sizes from 12 to 120 gallons and function properly with a minimum amount of vacuum or in areas where high water tables may be a problem Max. Pressure Tank Connection Pump Connection Supply Tank Part Number 100 1/4" MPT 7/16" - 24 THD Max. 42 gallons Brady AV45 100 3/8" MPT 7/16" - 24 THD Max. 120 gallons Brady AV100
E40 Jet Pump Mounting Kits For vertical pressure tank applications Mounting bracket fits on top of pressure tanks Saves floor space Kit Includes For Tanks Part Number Bracket & mounting bolt Berkeley PS Series PKG198 Snifter Valves Use for pressurizing water tanks Size Construction Part Number 1/8" MPT Steel SV0NL 1/4" MPT Brass SV1NL
E41 Tank Tees Union allows for easy servicing Tank tees with 2 drain ports are supplied with a plug No Lead <0.25% Third Party Total Length U. to T. Length C. to E. Length Tank Connection Line Connection Union # Of Ports 3/4" 1/2" 1/4" Part Number PVC 4" NA 3 5/8" 1 1/4" MPT x 1" FPT 1" M x 3/4" F No 1 0 2 Boshart 07-IC125 Solid Red Brass 5 1/2" NA 4 1/2" 1 1/4" MPT 1 1/4" M x 1" F No 2 0 2 Boshart 2-07TK-13S-2NL 5 1/2" 1" 4 1/2" 1" MPT 1" M x 3/4" F Yes 0 2 2 Boshart 2-07TKO-25S-2UNL 5 1/2" 1" 4 1/2" 1 1/4" MPT 1 1/4" M x 1" F Yes 2 0 2 Boshart 2-07TKO-13S-2UNL Solid Brass 8 1/2" 4" 7 1/2" 1" MPT 1" M x 3/4" F Yes 0 2 2 Boshart 2-07TKO-8-2UNL 11" 6 1/2" 10" 1" MPT 1" M x 3/4" F Yes 0 1 2 Boshart 2-07TKO-25-1UNL 11" 6 1/2" 10" 1" MPT 1" M x 3/4" F Yes 0 2 2 Boshart 2-07TKO-25-2UNL 14" NA 13" 1" MPT 1" M x 3/4" F No 0 2 2 Boshart 2-07TK-14X1-2NL 14" 9 1/2" 13" 1" MPT 1" M x 3/4" F Yes 0 2 2 Boshart 07TK14X1-2U 14" NA 13" 1 1/4" MPT 1 1/4" M x 1" F No 2 0 2 Boshart 2-07TK-13-2NL 14" 9 1/2" 12 3/4" 1 1/4" MPT 1 1/4" M x 1" F Yes 2 0 2 Boshart 2-07TKO-13-2UNL U. to T. = Union Static Wrench Spot to Thread Start C. to E. = Centre of Cross-Pipe to Thread End 07-IC125 2-07TKO-13S-2UNL 2-07TKO-25S-2UNL 2-07TKO-8-2UNL 2-07TKO-25-1UNL
E42 Tank Tee Packages Package Components Fits Pressure Tank No. Part Number Brass Tank Tee With Union #2-07TK0-8-2UNL (8 1/2") Pressure Switch #51A30-50 (30-50psi) Pressure Gauge #PGCBM1-100 (Back Mount, 0-100psi) Sediment Faucet #0853-05NL (1/2") Brass Nipple #BRN0230 (1/4" x 3") Brass Tank Tee With Union #2-07TK0-25-2UNL (11") Pressure Switch #51A30-50 (30-50psi) Pressure Gauge #PGCBM1-100 (Back Mount, 0-100psi) Sediment Faucet #0853-05NL (1/2") Brass Nipple #BRN0230 (1/4" x 3") Brass Tank Tee With Union #2-07TK0-13-2UNL (14") Pressure Switch #51A30-50 (30-50psi) Pressure Gauge #PGCBM1-100 (Back Mount, 0-100psi) Sediment Faucet #0853-07NL (3/4") Brass Nipple #BRN0230 (1/4" x 3") PVC Tank Tee #07-IC125 (4") Pressure Switch #51A30-50 (30-50psi) Pressure Gauge #PGCBM1-100 (Back Mount, 0-100psi) Sediment Faucet #0853-07NL (3/4") Brass Nipple #BRN0230 (1/4" x 3") PVC Plug #850005 (1/2") Packages Include: Tank Tee Pressure Switch Pressure Gauge Sediment Faucet Drain Brass Nipple Plug (53ATTP) WR60R WR80R WR120R WR140R WR200R WR240R 33171 (FL-7) 33172 (FL-12) 33174 (FL-22) 50ATTP 51ATTP 52ATTP 53ATTP Brass Relief Valve - Non-Adjustable Cast bronze alloy Stainless steel spring and retaining screw Buna sealing disc Maximum operating temperature 60C (140F) No Lead <0.25% Third Party 51ATTP Inlet Outlet Working Pressure Part Number 1/2" MPT 1/2" FPT Set at 75 psi Boshart RVNB05-075NL 1/2" MPT 1/2" FPT Set at 100 psi Boshart RVNB05-100NL 3/4" MPT 1/2" FPT Set at 75 psi Boshart RVNB07-075NL 3/4" MPT 1/2" FPT Set at 100 psi Boshart RVNB07-100NL Not for use with hot water heaters
08/07/11 E43 This Page is Temporarily Blank