REPLACE GREY BOX WITH COMPANY LOGO. EDIT THIS IN THE SLIDE MASTER. SPI - SP-P&ID - SPEL INTEGRATION John Dressel, FLUOR Applications Specialist FOOTER: EDIT THIS AND THE DATE IN THE MASTER > SLIDE MASTER UNDER THE INSERT MENU.
SPI - SP-P&ID - SPEL Integration SP-P&ID Publishes to SmartPlant Foundation for SPI & SPEL Retrieval SPI correlates Instrument tag Numbers with SP-P&ID and Publishes Instrument Power requirements and signals for SPEL SPEL Retrieves Instrument power requirements and signals from SPI and Electrical Equipment from P&ID
Implementation of SP-P&ID Integration SmartPlant P&ID Publish P&ID Diagram Numbers, Instrument Numbers, Line Numbers, Equipment Numbers and Associated Data to SmartPlant Foundation Other SmartPlant tools Retrieve the P&ID Data from the SmartPlant Foundation
SP-PID to SPI Interface PRE-REQUISITES: SPI and SP P&ID must be configured for integration Plant, Area, Unit structure needs to be compatible with the integrated environment Note: Make sure to register all units associate with the plant for SP P&ID. SP P&ID Symbols library must be developed with any project specific modification included. Instrument Tag Naming Conventions from SPI and SP P&ID must be compatible for data correlation. The project configuration needs to register to SP PID client workstation.
Publish SP-PID to SmartPlant Foundation When P&ID is ready to publish to SPF, a revision needs to be created and assigned to the P&ID. The P&ID can be re-published anytime with a new version number If P&ID Revision Number does not change before republish, The SPF interface will assign a sub-number to the current revision. A P&ID may be published as many time as necessary to maintain a data centric interface
Retrieve SP-PID Data from SPF to SPI Only the current revision of the published P&ID is retrievable Note! Tags that are in both SPI and SP_PID will correlate to each other without having to identify new Tags in SPI This will allow SPI users to create an Instrument index in SPI before P&ID publishing without having data overwritten For Tag correlation to work the Unit Number conflict must be corrected with a Hot Fix May use Macro Expansion for implied Tags
Workflow SP-PID from SPF in SPI Review Action To-Do list items If it is the first retrieve Run Create Instrument tags in SPI Run Create Line in SPI Run Create Piping Port 1, 2 in SPI If it is not the first retrieve If New Tag Run Create Instrument tags in SPI. Run Create Line in SPI Run Create Piping Port 1, 2 in SPI If Existing Tag Run Update / Delete Instrument tags in SPI Run Update / Delete Line in SPI
Process SP-PID from SPF in SPI Create command means that instrument is not yet in SPI, when you run create it will create instrument in SPI with new value. Instruments already in SPI with matching Tags will associate with SP-PID Tags Created Instruments must be edited to add proper Instrument Type, associate to Loop and re-launch profiles for Spec, Process and wiring data
Publish SPI data to SPF Verify and Review data from Instrument Index When Instrument Index is ready to publish to SPF, the revision needs to be assigned to the document. Each time new instruments are retrieved and created in SPI, an index must be published to SPF with the new tags to complete the establishment of the required relationships. Once the Instrument index is published, the instrument tags on the index will be correlated with SP PID and the necessary relationships will be established, and Instrument will change status to share from SPF
Change Management Because P&ID s on a project are subject to strict change management procedures, when you implement the P&ID s with integration, the incorporation of approved changes must apply to the shared data as well as the P&ID drawings. To support this work process, the P&ID s and associated data available for retrieval into SPI must be kept current with the project scope. This requires that the P&ID s be maintained in SP P&ID and published to Smart Plant Foundation as changes are approved. PUBLISH PUBLISH DO NOT RETREVE RETREVE
Implementation of SPEL Integration SmartPlant Electrical Retrieves Instrument Power Requirements and Signals from SPI and Electrical Equipment Numbers from SP-P&ID and Tray Data from SP-3D SmartPlant Electrical Publishes Cables requirements to SP-3D and Instrument circuiting with Electrical Signals to SPI
Implementation of SPEL Integration SPI and SPEL already separate some of the tasks without duplicating them but there are some that can be done in both places (i.e. cable routing) Current integration addresses 2 main tasks: Management of power supply for instrument entities (cabinets, panels and externally powered instruments) Management of electrical I/O signals in control systems. It is also possible to cross-report on SPI control loop diagram in SPEL and cross-report on SPEL schematic in SPI when both products are installed on the same workstation. 12
Integrated I&E functional roles One of the issues with the current integration is that SPI and SPEL are two applications and not one. Mainly this is because traditionally SPI is primarily used by I&C department or instrument or I&C section of the I&E department, while SPEL is designed to be used by Electrical department or by the electrical section of the I&E department. There are customers, mostly in Europe, where both functions of I&C and electrical (low voltage) are combined in one functional role. They would like to see more similarity in SPEL and SPI user interface, especially in Similar properties for the same/related items (electrical signals, device panels, etc); Extended representation of the SPEL tree/data in SPI Extended presentation of the SPI data in SPEL and similar. The question we face is how relevant/important this is for the broad user community and users in both applications? This will be one of the subjects of discussion at the June 3 Global TUF meeting during the joint I&E session between Instrumentation and Electrical TUF s June 3, 2012 13
Cable Management for SPI & SPEL In trying to find the most optimal path for integration between the three applications we constantly face these questions: Is there a need for a single common cable schedule? Where should such cable schedule reside? Is there a need for a single cable routing reporting/documentation mechanism for both I&E cables and if so which discipline is usually responsible for it and what tool should be the master for this function? SPEL and SP3D have an interface as part of the SP Enterprise integration (SPE). Does it make sense to develop separate SPI-SP3D interface using a similar interface or does it make more sense to extend SPI-SPEL integration to cover cables and to/from locations and use SPEL as a common cable schedule? June 3, 2012 14
SPI and SPEL Cable Management New SmartPlant Instrumentation Cable Browser View Allows SPI to export the instrument cable requirements to SPEL SPEL can then Publish both Electrical and Instrument Cable requirements to SP3D for Tray Loading Cable Tray Routing and Loading done in SP3D will Provide Lengths and Routing Data The SP3D Cable Lengths and Routing is Published Back to SPEL Cable Schedules can be Published from SPEL for Electrical and Instrument Cables or Instrument Cable Data may be Exported from SPEL and Imported into SPI for Instrument Cable Schedules
QUESTIONS REPLACE GREY BOX WITH COMPANY LOGO. EDIT THIS IN THE SLIDE MASTER. SPI - SP-P&ID - SPEL INTEGRATION FOOTER: EDIT THIS AND THE DATE IN THE MASTER > SLIDE MASTER UNDER THE INSERT MENU.