IPC-1H Version 2.1
Thank you for purchasing our COMM Integrated Control Switches! COMM Integrated Control Switches (IPC Series) - Designed to control your Audiovisual Equipment in the most simplified ways via RS-232 commands; reasonably priced and works with most projectors and plasma displays. One Touch Selection with LED Back-Lit Indications on the selectors buttons, you can easily control your displays with its various selector buttons (e.g. select the different input source, volume and/or screen controls etc) Widely used in Classrooms, Auditoriums, Lecture Theatres, Conference Rooms etc. MAIN FEATURES Display Controller for your Projector, Plasma (Power ON/OFF, input source selections, volume control) via RS232 Commands One Touch Selection with LED Back-Lit Indications 16 sets of pre- programmed control protocols for the different displays models Digital Volume Control for sound level adjustments Optional : Contact Relay Module for Motorised Screens IPC-CRM1 A
TABLE OF CONTENTS 1 Function Keys.... 1 2 Internal Board Connections.... 2 3 Connections. 3 3.1 RGB & Audio Connection... 3 3.2 Power & USB Connection... 4 3.3 RS-232 Connection... 5 3.4 HDMI Connection... 6 3.5 Relay Contact Module... 7 4 Specifications... 8 5 Standard Package... 9 6 Troubleshooting.. 10 7 Notes.. 11 8 Connections Diagram 12 B
1. Function Keys Model No: IPC-1H 1 2 3 4 5 6 7 15 14 8 9 13 12 11 10 1. Display ON 2. Display OFF 3. Picture Blank Toggle Button 4. Sync ON/OFF 5. Volume Control DOWN / *Screen Control DOWN (optional) 6. Volume Control MUTE / *Screen Control STOP (optional) 7. Volume Control UP / *Screen Control UP (optional) 8. HDMI/ Wireless Signal In Selector 9. Screen and Audio Selector 10. PC Audio Input 11. PC Signal Input 12. HDMI Signal Input 13. USB Type B Input 14. PC / Video Signal In Selector 15. USB Type A Input *Applicable only with the use of the Optional Contact Relay Module for Motorised Screens IPC-CRM1 1
2. Internal Board Connections 1 2 3 4 5 9 8 7 6 1. RS232 Connection 2. Dip-Switch Settings 3. Programming Connection 4. Power Connection 5. USB Type A Connection 6. USB Type B Connection 7. RGB Connection 8. Audio Connection 9. HDMI Connection 2
3.1. RGB & Audio Connection 1 2 3 4 5 6 7 8 9 10 1. Red 2. Red Ground 3. Green 4. Green Ground 5. Blue 6. Blue Ground 7. Horizontal (H) 8. Vertical (V) 9. Signal Ground (GND) 10. Audio (Female Mini Jack) 3
3.2. Power & USB Connection 3 2 1 4 1. Direct plug-in to 12V DC Power Adapter (Power Adapter Supplied with every purchase) OR 2. Negative - on Power Adapter 3. Positive + on Power Adapter 4. USB Connection 4
3.3. RS232 Connection 1 2 1.Ground (GND) 2.Transmit (TX) RS232 to Projector (GND) RS232 to Projector Received (RXD) Please refer to Dip Switch Settings (Separate Appendix) for the different projectors settings. 5
3.4. HDMI Connection 1 1. HDMI (Female) 6
3.5. Contact Relay Module Connection (Optional) Consists of: 1) Contact Relay Module IPC-CRM1 2) Cables from IPC to Contact Relay Module 1 2 3 4 7 3 2 1 4 Connection: 1: Ground (Red) 2: UP (Blue) 3: Down (Green) 4: 5VDC (White)
4. Specifications MODEL : IPC-1H A) Input PC PC Audio HDMI USB B) Output PC PC Audio HDMI USB Type A USB Type B Contact Relay Module - VGA (D-Sub 15-Pin Female) - 3.5mm Mini Jack - HDMI Female - USB Type A and USB Type B - Terminal Block - 3.5mm Mini Jack - HDMI Female - Terminal Block - Terminal Block - Terminal Block C) Communication Control Serial Control Port - RS232 Baud Rate - 9600, 19200, 38400, 115200 Data / Stop Bits - 8 bits / 1 stop bit, No parity - Programmable to 2 stop bit and EVEN parity. Contact Relay Module - UP and Down Control D) Selector Switch (with LED Back-Lit Indications) Projector ON/OFF Blank (Toggle Button) Auto Sync (Toggle Button) VOLUME UP / MUTE / DOWN (for PC & HDMI Audio) * IPC-1HR- (UP/ Down for Relay) VGA IN Selector VIDEO IN Selector HDMI IN Selector WIRELESS IN Selector (depending on the device whether there s Wireless presentation functions) E) Power Supply 12V DC 500mA Power Adapter Contact Relay Module: DC 12V Contact Rating: 230VAC 10Amp F) Product Dimension & Weight Unit Dimension (W x H x D) : 14.5cm x 8.6cm x 5.3cm (5.7 x 3.4 x 2.1 ) Unit Weight : 0.25 kg (0.55 lbs) Box Dimension (W x H x D) : 26.2cm x 9.2cm x 6.4cm (10.3 x 3.6 x 2.5 ) Weight (Incl. Power Adapter) : 0.6 kg (1.32 lbs) 8 All products information and specifications are subject to changes without prior notice.
5. Standard Package Consists of the following: (1) Integrated Control Switcher Unit Optional: Contact Relay Module, IPC-CRM-1 (2) 12V DC 500mA Power Adapter (3) Terminal Connectors (4) User Manual 9
6. Troubleshooting Problem I have connected the power adapter to the control switch but there are still no LED lights indications on the control switch. Solution 1. Check the positive & negative on the power adapter is soldered at the right connection. (See page 4) 2. Verify the voltage of the power adapter is in accordance to your country current power voltage input I have soldered the RS232 connections to the projector/plasma control port, but still unable to control the switch accordingly. 1. Make sure the RS232 GND and TX soldering connections are soldered on the right pin on the controller PCB Board. (See page 6) 2. Check the RS232 connection settings on the projector/plasma for the correct baud rates or Pin Configurations. There may be a need to change the default baud rate setting on your projector/ plasma, if required. (See page 6) 3. Reprogramming is required. (Please refer to the programming manual) 4. Check RS232 connector is that short circuit. Flickering images projected out after the connections to the control switch. 1. Make sure the RGB Soldering connections on the Horizontal and Vertical is soldered correctly. (See page 3) One of the colors projected out is missing, or the colors are washed off. 1. Make sure the RGB Soldering connections on the Red, Green and Blue is soldered correctly. (See page 3) If all the LED are lighted up on the control switch. If there are Hissing sound problem from your Active Speakers. 1. Reprogramming is required. (Please refer to the programming manual) 1. This is a high Gain pre-amp switcher, Please turn down the Speaker Volume and Control Volume up/down by switcher If these troubleshooting tips do not solve your problems, please email us at support@commproduct.com or call us at (+65) 6222 5880. 10
7. Notes 1. Please remember to switch OFF IPC switcher s POWER ADAPTER during the soldering process or connection with the relay contact module 11
8. Connection Diagram PROJECTOR VGA Cable RCA Cable RS232 cable (TX and GND) Audio OUT (Left/Right) USB IN Power Supply COMM IPC-1H WIZARSWITCH HDMI Signal with AUDIO and USB IN Audio Out USB Cable VGA Signal with AUDIO and USB IN INTERACTIVE BOARD MULTIMEDIA SPEAKER MOTORISED Screen/ Lift (Only for IPC1HR) 12
For additional information, please contact us at: info@commproduct.com Customer Care HelpDesk: support@commproduct.com All products information and specifications are subject to changes without prior notice. Last updated as at 1-June-2013 13 Comm Products Technologies Pte Ltd 2013