Permanent Suspended Access Building Maintenance Units - Monorails - Gantries
Riemst Bridge (B) Ministry of Electricity (Bahrain) Torre Mayor Chapultepec (MEX) Le Monde, Paris (F) Tractel Secalt TM : throughout the world... Naberezhnaya Towers, Moscow (RU) Main Station Berlin (D) Bahrain World Trade Center 2 2 Burj Al Arab, Dub
Tractel Secalt TM : Access to the most inaccessible areas Tractel Secalt S.A., part of the Tractel Group, is the world s leader in suspended access solutions, with more than 8,000 BMU references worldwide. These systems allow the maintenance of the world s most famous buildings. The knowledge and experience of Tractel Secalt TM, developed over many years, guarantees its customers, the most appropriate technical solutions that meet all the relevant quality standards and safety regulations. The different technical solutions developed by Tractel Secalt TM (machines, monorail, jibs, platforms, ladders ) are all solutions that can easily be integrated into the buildings architecture while taking into account the customer s aesthetic and technical requirements. Tractel Secalt S.A. is certified ISO 9001: 2008. Kuwait Trade Center, Kuwait Air Traffic Control Center, Abu Dhabi (UAE) ai (UAE) 3 3
For each building, Take advantage of Tra Gantry over a glass canopy, Paris (F) ORAIL, Ministry of Communications Ashgabat (TM) Gantry for external maintenance of telecommunication tower, Brussels (B) 4 Suspended platform from traversing trolley on monorail, Morocco (M) Suspended platform from a powered Davit, Basel (CH)
its own solution ctel Secalt experience MARS machine on parapet, Bologna (IT) Mustang machine on rails, Brussels (B) ALTA suspended platform from 2 Portafix jibs, Luxembourg (L) Suspended powered platform on 2 Davits (ZA) Telescopic gantry for internal maintenance of glazed surfaces, London (UK) 5
SUSPENDED PLATFOR With our vast experience of developing solutions, we can advise you from the very beginning of the project on the most appropriate equipment. Roof space A BMU with roof car requires a track on the roof for traversing. Plan for enough space on the roof top for the machine to move near the buildings edge. Beware of obstacles such as stairway exits or air conditioning units Depending on the roof space available, choose between a compact machine solution or a machine equipped with a mast. Machine tracks Several track solutions are available (concrete, free laying rails or attached rails) depending on the machine type and building structure. Compact machines Lifting Height (metres) Characteristics: crossing over high parapets adjustment to the facade reduced gauge widths can be used on concrete or rail tracks Jib length (metres) 6
MS WITH ROOF CARS Types of tracks Concrete Mast machines Rail track placed on concrete or steel plate Rail track fixed to concrete or steel post Characteristics: light machine with counterweights attached to jib only available on rail tracks suitable for very long jibs Lifting Height (metres) Jib length (metres) 7
Compact machines VENUS Working height: max. 50 m (other heights on request) Jib length: max. 3 m Compact, light, economic machine with powered platform (TIRAK TM hoist on the platform). Track gauge: 1.3 1.5 m Working height: max. 80 m Jib length: max. 3 m Simple and economic solution. TIRAK TM hoist is fitted on the roof car. Track gauge: 1.0 1.5 m LUNA Working height: 280 m and more Jib length: max. 10 m Our bestsellers, compact and versatile. TIRAK TM hoist(s) installed within the turret. Track gauge: 0.8-1.8 m Options: additional load winch, special cradles,... MARS/JUPITER Working height: 280 m and more Jib length: >10 m 8 The most performant compact machine, with its very long jib and hydraulic luffing this machine is especially suited for very high parapets and limited space. Track gauge: 1.8 2.5 m Options: telescopic jibs and telescopic masts. SATURNE
Mast Machines Only available on rail tracks Working height: max. 50 m (other heights on request) Jib length: max. 10 m Lightweight BMU thanks to counterweight fixed to the back of the jib. Equipped with powered platform (TIRAK TM hoist on the platform). Track gauge: 1.3 1.8 m VIPER Working height: 280 m and more Jib length: max. 15 m Flexible model, with possibility to adjust the mast height. TIRAK TM hoist(s) installed within the turret. Track gauge: 1.8 m MUSTANG Working height: 280 m and more Jib length: >15 m The most versatile machine, capable of lifting facade panels, special long cradles,... Track gauge: 1.8 2.5 m Options: telescopic jibs and telescopic masts. SCORPIO 9
Common characteristics Machines CE certified and complying with the European Motorised slewing turret. Machinery Directive and the European Standard EN 1808. All the motors, electrical cabinets Welded assembly, hot galvanised steel. and commands are IP 55. Platforms made out of aluminium alloy. TIRAK TM traction lifting hoist. Double command from the machine and from the cradle. Single jib with slewing spreader bar. Options Special spreader bars (V shaped, longer lengths, Telescopic jib. articulated, ). Telescopic mast. Operations are powered and controlled through Hoist for additional load. the patented MAGTRON TM control system. PLC (for programming movement). Specially equipped against low temperature Guiding systems (by mullion guide or restraint plug). (for geographic regions such as Russia, Scandinavia, ). MAGTRON control TIRAK MAGTRON TM is a patented system by Tractel Secalt TM that allows the transmission of data between cradle and roof car by induction of a magnetic field in a closed circuit created by the steel wire ropes. Advantages: Elimination of the pendant electrical cable or special suspension wire rope integrated electrical wires. No need for a radio command. No requirement for a dedicated transmission frequency. No interference with the electrical or computing environment. Control voltage reduced to 10 V. Standard on JUPITER, SATURNE and SCORPIO machines All machines are equipped with a TIRAK traction hoist, either X series (one cable) or XD series (dual cable). Traction hoist, developed and made by the TRACTEL Group. Compact, robust, lightweight and reliable design. Approved for man-riding according to the European, American and Canadian norms. Reduced maintenance requirement prolongs the life expectancy of the machine. TIRAK série X TIRAK série XD 10
Platforms and Cradles Powered Cradles Powered cradles intended to be used with BMU roof cars (VENUS, VIPER, parapet trolleys), davits and monorails. ALTA L 2 m platform, max. lifting height 220 m SOLO cradle (1 person), max. lifting height 80 m ALTA «P» cradle, max. lifting height 160 m Special Cradles for BMUs JUPITER, SATURNE, MUSTANG and SCORPIO Cradle with additional basket Pantograph cradle Deported cradle 11
Other Access Solutions: D Fixed Davits Fixed Davits are an economic and simple solution, with ALTA or SOLO powered platform suspended to one or two Davits. Advantages: Low installation cost. Lightweight and easy to move on the roof. No excess equipment on the roof. System can easily be dismantled when not in use. Powered Davits Traversing on a track fixed to the parapet, this system leaves the roof free of equipment whilst providing a simple and efficient solution. Powered Davits can be used with ALTA or SOLO platforms equipped with TIRAK TM hoists. Powered Davits with ALTA platform (IT) Fixed Davits Powered Davit with SOLO platform, Basel (CH) Polelifts An ideal solution for buildings under 20 m height, as the polelift mast is attached to rail tracks at the top and bottom of the structure allowing lateral movement and the platform moves vertically on the mast. 12 Polelift, Geneva (CH) Polelift, glazed dome, Reichstag Berlin (D)
avits, Polelifts, Gantries... Ladders and Travelling Gantries Solutions for inside and external maintenance of glazed structures such as domes, atriums and buildings with panoramic views. All mobile gantries are made from profiled aluminium, which can be coated or anodised depending on the customers requirements. Mobile gantry, Ministry of Communications Ashgabat (TM) Mobile gantry with powered ALTA platform suspended from inclined RAILSCAF monorail Alulift Electric driven hydraulic platform for working heights up to 16 m. The Alulift is a compact, lightweight and polyvalent platform which can pass through all standard doors, reaching 16 m in height. It can be powered either by mains electricity or by battery. TRAVSAFE Lifelines The horizontal lifelines TRAVSAFE / TRAVFLEX allow punctual, secure access to building tops where there is a risk of falling from height. It is a dual cable lifeline that: Allows great personal mobility Allows up to five people to work simultaneously, attached to the same lifeline Providing individual height protection is a key priority for the TRACTEL, Group, who can offer a complete safety solution (harness, lanyards and anchor points). 13
The monorail: a system An ideal system for integrating into metal structures and curtain wall facades, as it blends perfectly with the building. The monorails are made of aluminium alloy and may be supplied plain, anodised, or powder-coated. They can be formed both vertically and horizontally to fully integrate with the facades. All monorails can be fitted with manual or powered trolleys which are easy to operate in complete safety. ORAIL (Aluminium) Monorail in aluminium alloy, ideal aesthetic solution for an installation within a recess or false ceiling. Profile: aluminium 115 x 95 mm Max. distance between brackets: 2.9 m Max. loading per trolley: 500 kg ORAIL with ALTA platform, King Abdullah University of Science and Technology (SA) EASYRAIL Monorail for buildings where bigger spacing between brackets is required. Profile: Aluminium 175 x 73 mm Max. distance between brackets: 4.4 m Max. loading per trolley: 500 kg EASYRAIL (FR) O-SCAF Monorail with integrated chain for gantries travelling on outside sloped structures. Profile: Aluminium 80 x 100 mm Max. distance between brackets: 2.0 m Max. loading per trolley: 350 kg O-SCAF, TGV Railway station, Liège (B) 14
integrated into the facade I-SCAF Monorail for ceiling or cornice, which can be equipped with an integrated chain to negotiate slopes. Profile: aluminium 55 x 110 mm Max. distance between brackets: 1.8 m Max. loading per trolley: 350 kg I-SCAF, TGV Railway station, Liège (B) RAILSCAF Strong but compact monorail for horizontal applications. Profile: Aluminium 120 x 40 mm Max. distance between brackets: 3.0 m Max. loading per trolley: 350 kg RAILSCAF with ALTA platform, Paris (F) Climbing RAILSCAF Monorail fitted with an integrated chain allowing powered trolleys to negotiate steep inclinations. Profile: Aluminium 120 x 45 mm Max. distance between brackets: 3.0 m Max. loading per trolley: 350 kg Climbing RAILSCAF, London (UK) 15
Tractel Secalt TM : Having the Know-how TRACTEL Group Company Distributor Distribution and After-sales Service Around the world, the TRACTEL Group companies, together with their distribution network, put their knowledge and experience at your disposal to ensure a fast and efficient service. For the details of your nearest distributor, contact Tractel Secalt S.A. Tractel Secalt S.A. 3, rue du Fort Dumoulin B.P. 1113 L-1011 Luxembourg Tel. : (352) 43.42.42-1 Fax : (352) 43.42.42-200 e-mail : secalt @tractel.com 16 www.tractel.com P1015-EN-08/2014 - Document non contractuel Tractel Secalt S.A. 2014 - All rights reserved.