MICON PRODUCTS LTD. MICON PRODUCTS Toll Free in North America

MICON PRODUCTS LTD. MICON PRODUCTS Micon Products Ltd. 1325 Cartwright Street Granville Island Vancouver, B.C. Canada V6H 3R7 Toll Free in North America 1 866 683-1285 Phone: (604) 683-1285 Fax: (604) 683-1597 Web: http://www.miconproducts.com email: info@miconproducts.com Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285

Micon Products Ltd. has been serving the mining and construction industry since 1960. We have the ability to manufacture specialty tools to meet your needs. Please feel free to phone with your requirements. We are happy to supply standard or special order tools in small or large quantities. Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Paving Breaker Steel Rivet Buster Steel Chipper Steel Electric Hammer Steel Demo Tools Drill Steel Bars Stone Splitting & Masonry Ground Support 7/8 x 3-1/4 Shank..................... 2 1" x 4-1/4" Shank...................... 3 1-1/8" x 6" Shank...................... 4 1-1/4" x 6" Shank...................... 5 Jumbo Rivet Buster..................... 6 Standard Rivet Buster................... 6 IR8000 / IR9000....................... 7 Rivet Buster Accessories.................. 7 HEX Shank / OVAL.................. 8 HEX Shank / ROUND................ 9 ROUND Shank / ROUND............. 10 ROUND Shank / OVAL.............. 11 SDS MAX........................... 12 SDS Plus........................... 12 HILTI 805 / HILTI 905................... 13 Hitachi PH65 / Makita.................. 14 Sharpening / Reforging Service............ 14 Spline Drive......................... 15 Tools for Boom Mounted Demo Hammers..... 15 'H' Thread Drill Rods + Bits............... 16 Production Drill Steel R25, R32, R38, T38, T45 etc. 16 R25 (1" Rope) Thread Drill Rods + Bits........ 17 Integral Bits (Whirley Bits)............... 18 CP-9/MRD-9 Bits...................... 18 Integral Rods........................ 19 ed & Tapered Drill Rods + Bits......... 19 Digging Bars........................ 20 Form Stripping Bars.................... 20 Goose Neck Nail Pullers................. 20 Scaling Bars......................... 20 Aluminum Scaling Bars.................. 20 Rock Splitting & Trimming Hammers......... 21 Wedge & Shim Sets.................... 21 Carbide Tipped Masonry Chisels........... 21 Ground Support for Mining & Construction.... 22 Hardware for Hollow Core Anchor Systems.... 22 MICON PRODUCTS toll free North America 1 866 683-1285 Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 1

7/8 x 3-1/4 Shank Paving Breaker Steel Other s Available Under 42001-14" 3 ½ 42001-18" 4 42001-24" 6 ½ 42001-30" 7 ½ 42001-36" 8 ½ 42001-48" 10 ¾ 42001-60" 13 42001-72" 15 ¼ 42001-84" 17 ½ 42001-96" 19 ¾ Other s Available Under 42002-14" 3 ½ 42002-18" 4 42002-24" 6 ½ 42002-30" 7 ½ 42002-36" 8 ½ 42002-48" 10 ¾ 42002-60" 13 42002-72" 15 ¼ 42002-84" 17 ½ 42002-96" 19 ¾ 2-1/2" WIDE CHISEL 2" Wide Also Available Other s Available 42003-14" 3 ½ 42003-18" 4 42003-24" 6 ½ 42003-30" 7 ½ 42003-36" 8 ½ 42003-48" 10 ¾ 42003-60" 13 42003-72" 15 ¼ 42003-84" 17 ½ 42003-96" 19 ¾ ASPHALT WEDGE 3" x 6" BLADE 42112 5 ¾ DIGGING CHISEL 3" x 10" BLADE 42113 8 ½ DETACHABLE SHANK SMALL TAPER 42116 4 ¾ LARGE TAPER 42117 5 FROST WEDGE 1-7/8" x 12" BLADE 42115 8 ½ RAIL SPIKE DRIVER 42121 6 4" TIE TAMPER 42124-16" 7 CLAY SPADE 42154 7 BUSHING TOOL 2" X 2" SQUARE HEAD 42134 5 ½ 5½" Wide Blade Standard 4½" Wide Blade Also Available ASPHALT CUTTER 5" WIDE BLADE 42155 7 GROUND ROD OR PIN DRIVER 42120-5/8" 5 ½ 42120-3/4" 5 ½ 42120-7/8" 5 ½ 42120-1" 5 ½ 42120-1-1/8" 6 ½ 42120-1-1/4" 6 ½ (5/8 to 2½ CUP SIZE) 42120-1-1/2" 6 ½ 42120-1-3/4" 7 Other Sizes Available 42120-2" 7 42120-2-1/2" 7 TAMPER PAD 6" SQUARE C/W SHANK 42163 16 ITEMS LISTED ON THIS PAGE ARE ALSO AVAILABLE WITH 7/8" X 4¼" SHANK 2 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

1" x 4-1/4" Shank Other s Available Under 42401-14" 4 ½ 42401-18" 5 ½ 42401-24" 7 42401-30" 8 ½ 42401-36" 10 42401-48" 13 42401-60" 16 42401-72" 18 ¾ 42401-84" 21 ¾ 42401-96" 24 ¾ Other s Available Under 42402-14" 4 ½ 42402-18" 5 ½ 42402-24" 7 42402-30" 8 ½ 42402-36" 10 42402-48" 13 42402-60" 16 42402-72" 18 ¾ 42402-84" 21 ¾ 42402-96" 24 ¾ Paving Breaker Steel 3" WIDE CHISEL 2" Wide Also Available Other s Available 42403-14" 5 ½ 42403-18" 6 ¼ 42403-24" 7 ¾ 42403-30" 9 ¼ 42403-36" 10 ¾ 42403-48" 13 ¾ 42403-60" 16 ¾ 42403-72" 19 ½ 42403-84" 22 ½ 42403-96" 25 ½ ASPHALT WEDGE 3" x 6" BLADE 42512 6 ¼ DIGGING CHISEL 3" x 10" BLADE 42513 6 ¼ DETACHABLE SHANK SMALL TAPER 42516 4 ¾ LARGE TAPER 42517 5 FROST WEDGE 1-7/8" x 12" BLADE 42515 17 ½ RAIL SPIKE DRIVER 42521 6 4" TIE TAMPER 42524-16" 8 CLAY SPADE 42554 8 BUSHING TOOL 2" X 2" SQUARE HEAD 42534 6 ¼ 5½" Wide Blade Standard 4½" Wide Blade Also Available ASPHALT CUTTER 5" WIDE BLADE 42555 7 GROUND ROD OR PIN DRIVER 42520-5/8" 6 42520-3/4" 6 42520-7/8 6 42520-1" 6 42520-1-1/8" 7 42520-1-1/4" 7 42520-1-1/2" 7 42520-1-3/4" 7 ½ (5/8 to 2½ CUP SIZE) 42520-2" 7 ½ 42520-2-1/2" 7 ½ Other Sizes Available TAMPER PAD 6" SQUARE C/W SHANK 42563 16 Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 3

Paving Breaker Steel 1-1/8" x 6" Shank Other s Available 3" WIDE CHISEL 2" Wide Also Available Other s Available 42601-14" 6 ¼ 42601-18" 7 ½ 42601-24" 9 ¼ 42601-30" 11 ¼ 42601-36" 13 42601-48" 17 42601-60" 20 ¾ 42601-72" 24 ½ 42601-84" 28 ¼ 42601-96" 32 42603-14" 7 42603-18" 8 ¼ 42603-24" 10 42603-30" 12 42603-36" 13 ¾ 42603-48" 17 ¾ 42603-60" 21 ½ 42603-72" 25 ¼ 42603-84" 29 42603-96" 32 ¾ DETACHABLE SHANK SMALL TAPER 42716 6 ¼ LARGE TAPER 42717 6 ¾ SUPERKUT CHISELS Under ROCK BUSTER 1" - 2" DIA. 42718 7 ½ 1¼" - 2¼" DIA. 42719 9 42710 8 ½ Other s Available Under 42602-14" 6 ¼ 42602-18" 7 ½ 42602-24" 9 ¼ 42602-30" 11 ¼ 42602-36" 13 42602-48" 17 42602-60" 20 ¾ 42602-72" 24 ½ 42602-84" 28 ¼ 42602-96" 32 ASPHALT WEDGE 3" x 6" BLADE 42712 8 DIGGING CHISEL 3" x 10" BLADE 42713 8 ½ FROST WEDGE 1-7/8" x 12" BLADE 42715 10 CLAY SPADE 42754 8 4" TIE TAMPER 42724-16" 10 5½" Wide Blade Standard 4½" Wide Blade Also Available BUSHING TOOL 2" X 2" SQUARE HEAD 42734 8 ¼ ASPHALT CUTTER 5" WIDE BLADE 42755 8 GROUND ROD OR PIN DRIVER 42720-5/8" 6 ¾ 42720-3/4" 6 ¾ TAMPER PAD 42720-7/8 6 ¾ 6" SQUARE C/W SHANK 42763 18 42720-1" 6 ¾ 42720-1-1/8" 9 42720-1-1/4" 9 (5/8 to 2½ CUP SIZE) 42720-1-1/2" 9 42720-1-3/4" 10 Other Sizes Available 42720-2" 10 4 42720-2-1/2" 12 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

1-1/4" x 6" Shank Other s Available Under 42801-14" 7 ½ 42801-18" 9 42801-24" 11 ¼ 42801-30" 13 ½ 42801-36" 16 42801-48" 20 ½ 42801-60" 25 42801-72" 29 ½ 42801-84" 34 42801-96" 38 ¾ Other s Available Under 42802-14" 7 ½ 42802-18" 9 42802-24" 11 ¼ 42802-30" 13 ½ 42802-36" 16 42802-48" 20 ½ 42802-60" 25 42802-72" 29 ½ 42802-84" 34 42802-96" 38 ¾ Paving Breaker Steel 3" WIDE CHISEL 2" Wide Also Available Other s Available 42803-14" 8 ½ 42803-18" 10 42803-24" 12 ½ 42803-30" 14 ½ 42803-36" 17 42803-48" 21 ¾ 42803-60" 26 ¼ 42803-72" 31 42803-84" 35 ½ 42803-96" 40 ASPHALT WEDGE 3" x 6" BLADE 42912 8 ½ DIGGING CHISEL 3" x 10" BLADE 42913 9 DETACHABLE SHANK SMALL TAPER 42916 6 ¾ LARGE TAPER 42917 7 ¼ FROST WEDGE 2" x 12" BLADE 42915 11 ¾ ROCK BUSTER 1" - 2" DIA. 42918 8 1¼" - 2¼" DIA. 42919 9 ½ RAIL SPIKE DRIVER 42921 6 CLAY SPADE 42954 9 4" TIE TAMPER 42924-16" 11 5½" Wide Blade Standard 4½" Wide Blade Also Available BUSHING TOOL 2" X 2" SQUARE HEAD 42934 8 ¾ ASPHALT CUTTER 5" WIDE BLADE 42955 9 GROUND ROD OR PIN DRIVER 42920-5/8" 7 ¼ 42920-3/4" 7 ¼ TAMPER PAD 42920-7/8 7 ¼ 6" SQUARE C/W SHANK 42920-1" 7 ¼ 42963 18 42920-1-1/8" 9 42920-1-1/4" 9 (5/8 to 2½ CUP SIZE) 42920-1-1/2" 9 42920-1-3/4" 10 Other Sizes Available 42920-2" 10 42920-2-1/2" 12 Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 5

Jumbo Rivet Buster 58201-12" 2 ½ 58201-18" 3 ¾ 58201-24" 5 58202-12" 2 ½ 58202-18" 3 ¾ 58202-24" 5 Rivet Buster Steel 21/2" WIDE CHISEL Split Sleeve Required 58208-15" 3 ¼ SHEARING/SIDE CUT CHISEL 58277-10" 2 BACKOUT PUNCH Standard 4" Clearance Longer Clearance Available 58275-5/8" 2 ½ 58275-3/4" 2 ½ 58275-7/8" 2 ½ Standard Rivet Buster 58301-12" 2 58301-18" 3 ¼ 58301-24" 4 58302-12" 2 58302-18" 3 ¼ 58302-24" 4 SHEARING/SIDE CUT CHISEL 58377-10" 2 BACKOUT PUNCH Standard 4" Clearance Longer Clearance Available 58375-5/8" 2 ½ 58375-3/4" 2 ½ 58375-7/8" 2 ½ 6 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Rivet Buster Accessories UPPER SLEEVE JUMBO RIVET BUSTER STANDARD RIVET BUSTER 582US 583US LOWER SLEEVE JUMBO RIVET BUSTER STANDARD RIVET BUSTER 582LS 583LS SPLIT SLEEVE JUMBO RIVET BUSTER 582SS LOCK SPRING JUMBO RIVET BUSTER STANDARD RIVET BUSTER 582SP 583SP RUBBER BUMPER JUMBO RIVET BUSTER STANDARD RIVET BUSTER 582RB 583RB Rivet Buster Steel IR8000 / IR9000 Heat exchanger tube drivers Available in any size and any gauge Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 7

HEX Shank / OVAL 50201-12" 2 50201-18" 3 50201-24" 4 50201-30" 5 50201-36" 6 50201-48" 8 50201-60" 10 50201-72" 12 50202-12" 2 50202-18" 3 50202-24" 4 50202-30" 5 50202-36" 6 50202-48" 8 50202-60" 10 50202-72" 12 Chipper Steel 2" WIDE CHISEL 50208-2"x12" 50208-2"x18" 50208-2"x24" 50208-2"x30" 50208-2"x36" 50208-2"x48" 50208-2"x60" 50208-2"x72" 1 ½" Wide Also Available PIN DRIVERS 2 ¼ 3 ¼ 4 ¼ 5 ¼ 6 ¼ 8 ¼ 10 ¼ 12 ¼ 50220-5/8" 2 50220-3/4" 2 50220-7/8" 2 50220-1" 2 ¼ 50220-1-1/8" 2 ¼ 3" WIDE CHISEL 50208-3"x12" 50208-3"x18" 50208-3"x24" 50208-3"x30" 50208-3"x36" 50208-3"x48" 50208-3"x60" 50208-3"x72" 2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 8 ½ 10 ½ 12 ½ BUSHING TOOL STEEL 50231 2 ½ CARBIDE 50231C 2 ½ NAIL DRIVER COMPLETE 50285 1 ½ SHANK 50285-1 1 ¼ GUIDE 50085-2 ¼ RUBBER TUBE 50085-3 0 SOLID BODY 50284 1 ¼ CLAY SPADE 50254 6 Specialty tools available on request. FLOOR SCRAPER COMPLETE 50257 7 SHANK 50257S 3 HEAD FSH 3 ½ BLADE FSB 0 NUTS (SET OF 4) FSN 0 SPECIALTY TOOLS ALSO AVAILABLE 8 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

HEX Shank / ROUND 50101-12" 2 50101-18" 3 50101-24" 4 50101-30" 5 50101-36" 6 50101-48" 8 50101-60" 10 50101-72" 12 50102-12" 2 50102-18" 3 50102-24" 4 50102-30" 5 50102-36" 6 50102-48" 8 50102-60" 10 50102-72" 12 2" WIDE CHISEL 50108-2"x12" 50108-2"x18" 50108-2"x24" 50108-2"x30" 50108-2"x36" 50108-2"x48" 50108-2"x60" 50108-2"x72" 1 ½" Wide Also Available PIN DRIVERS 2 ¼ 3 ¼ 4 ¼ 5 ¼ 6 ¼ 8 ¼ 10 ¼ 12 ¼ 50120-5/8" 2 50120-3/4" 2 50120-7/8" 2 50120-1" 2 ¼ 50120-1-1/8" 2 ¼ 3" WIDE CHISEL 50108-3"x12" 50108-3"x18" 50108-3"x24" 50108-3"x30" 50108-3"x36" 50108-3"x48" 50108-3"x60" 50108-3"x72" 2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 8 ½ 10 ½ 12 ½ BUSHING TOOL STEEL 50131 2 ½ CARBIDE 50131C 2 ½ Chipper Steel NAIL DRIVER COMPLETE 50185 1 ½ SHANK 50185-1 1 ¼ GUIDE 50085-2 ¼ RUBBER TUBE 50085-3 0 SOLID BODY 50184 1 ¼ CLAY SPADE 50154 6 Always wear safety glasses, ear protection and safety shoes/boots FLOOR SCRAPER COMPLETE 50157 7 SHANK 50157S 3 HEAD FSH 3 ½ BLADE FSB 0 NUTS (SET OF 4) FSN 0 SPECIALTY TOOLS ALSO AVAILABLE Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 9

ROUND Shank / ROUND 50301-12" 2 50301-18" 3 50301-24" 4 50301-30" 5 50301-36" 6 50301-48" 8 50301-60" 10 50301-72" 12 50302-12" 2 50302-18" 3 50302-24" 4 50302-30" 5 50302-36" 6 50302-48" 8 50302-60" 10 50302-72" 12 Chipper Steel 2" WIDE CHISEL 50308-2"x12" 50308-2"x18" 50308-2"x24" 50308-2"x30" 50308-2"x36" 50308-2"x48" 50308-2"x60" 50308-2"x72" 1 ½" Wide Also Available PIN DRIVERS 2 ¼ 3 ¼ 4 ¼ 5 ¼ 6 ¼ 8 ¼ 10 ¼ 12 ¼ 50320-5/8" 2 50320-3/4" 2 50320-7/8" 2 50320-1" 2 ¼ 50320-1-1/8" 2 ¼ 3" WIDE CHISEL 50308-3"x12" 50308-3"x18" 50308-3"x24" 50308-3"x30" 50308-3"x36" 50308-3"x48" 50308-3"x60" 50308-3"x72" 2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 8 ½ 10 ½ 12 ½ BUSHING TOOL STEEL 50331 2 ½ CARBIDE 50331C 2 ½ NAIL DRIVER COMPLETE 50385 1 ½ SHANK 50385-1 1 ¼ GUIDE 50085-2 ¼ RUBBER TUBE 50085-3 0 SOLID BODY 50384 1 ¼ CLAY SPADE 50354 6 Always wear safety glasses, ear protection and safety shoes/boots FLOOR SCRAPER COMPLETE 50357 7 SHANK 50357S 3 HEAD FSH 3 ½ BLADE FSB 0 NUTS (SET OF 4) FSN 0 SPECIALTY TOOLS ALSO AVAILABLE 10 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

ROUND Shank / OVAL 50401-12" 2 50401-18" 3 50401-24" 4 50401-30" 5 50401-36" 6 50401-48" 8 50401-60" 10 50401-72" 12 50402-12" 2 50402-18" 3 50402-24" 4 50402-30" 5 50402-36" 6 50402-48" 8 50402-60" 10 50402-72" 12 2" WIDE CHISEL 50408-2"x12" 50408-2"x18" 50408-2"x24" 50408-2"x30" 50408-2"x36" 50408-2"x48" 50408-2"x60" 50408-2"x72" 1 ½" Wide Also Available PIN DRIVERS 2 ¼ 3 ¼ 4 ¼ 5 ¼ 6 ¼ 8 ¼ 10 ¼ 12 ¼ 50420-5/8" 2 50420-3/4" 2 50420-7/8" 2 50420-1" 2 ¼ 50420-1-1/8" 2 ¼ 3" WIDE CHISEL 50408-3"x12" 50408-3"x18" 50408-3"x24" 50408-3"x30" 50408-3"x36" 50408-3"x48" 50408-3"x60" 50408-3"x72" 2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 8 ½ 10 ½ 12 ½ BUSHING TOOL STEEL 50431 2 ½ CARBIDE 50431C 2 ½ Chipper Steel NAIL DRIVER COMPLETE 50485 1 ½ SHANK 50485-1 1 ¼ GUIDE 50085-2 ¼ RUBBER TUBE 50085-3 0 SOLID BODY 50484 1 ¼ CLAY SPADE 50454 6 Sharpening: Micon Products can not be responsible for tools that have been sharpened by an outside source. FLOOR SCRAPER COMPLETE 50457 7 SHANK 50457S 3 HEAD FSH 3 ½ BLADE FSB 0 NUTS (SET OF 4) FSN 0 SPECIALTY TOOLS ALSO AVAILABLE Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 11

SDS MAX 2" WIDE CHISEL 61501-12" ¾ 61501-16" 1 61501-24" 1 ½ 61501-30" 1 ¾ 61501-36" 2 61501-48" 3 61508-2"x16" 1 61508-2"x24" 1 ½ 61508-2"x30" 1 ¾ 61508-2"x36" 2 61508-2"x48" 3 3" WIDE CHISEL 61502-12" ¾ 61502-16" 1 61502-24" 1 ½ 61502-30" 1 ¾ 61502-36" 2 61502-48" 3 61508-3"x12" 1 61508-3"x16" 1 ¼ 41/2" WIDE CHISEL 61508-4-1/2"x12" 1 4" CLAY SPADE 61554 5 ASPHALT CUTTER 61555 5 Electric Hammer Steel PIN DRIVERS SDS Plus 61520-5/8" 1 ¼ 61520-3/4" 1 ¼ 61520-7/8" 1 ¼ 61520-1" 1 ¼ 61520-1-1/8" 1 ¼ BUSHING TOOL STEEL 61531 2 ¾ CARBIDE 61531C 2 ¾ FLOOR SCRAPER COMPLETE 61557 7 SHANK 61557S 3 ½ HEAD FSH 3 BLADE FSB 0 NUTS (SET OF 4) FSN 0 WIDE CHISELS 1-1/2" WIDE 61408-1-1/2"X10" ½ 2" WIDE 61408-2"X10" ½ 3" WIDE 61408-3"X7" ½ 61401-10" ½ 61402-10" ½ SDS Max & SDS Plus Drill Bits Also Available 12 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

HILTI 805 / HILTI 905 61701-14" 2 ½ 61701-18" 3 ¼ 61701M-24" 4 ¼ 61701M-30" 5 ¼ 61701M-36" 6 ½ 61701M-48" 8 ½ 61702-14" 2 ½ 61702-18" 3 ¼ 61702M-24" 4 ¼ 61702M-30" 5 ¼ 61702M-36" 6 ½ 61702M-48" 8 ½ 2" WIDE CHISEL 61708-2"x14" 61708-2"x18" 61708M-2"x24" 61708M-2"x30" 61708M-2"x36" 61708M-2"x48" 2 ½ 3 ¼ 4 ¼ 5 ¼ 6 ½ 8 ½ 3" WIDE CHISEL 61708-3"x14" 61708-3"x18" 61708M-3"x24" 61708M-3"x30" 61708M-3"x36" 61708M-3"x48" 2 ¾ 3 ½ 4 ½ 5 ½ 6 ¾ 8 ¾ PIN DRIVERS 61720M-5/8" 61720M-3/4" 61720M-7/8" 61720M-1" 61720M-1-1/8" Other Sizes Available Tool Safety: 1 ½ 1 ½ 1 ½ 1 ½ 1 ¾ 4" CLAY SPADE 61754 5 FLOOR SCRAPER COMPLETE 61757 7 ½ SHANK 61757S 4 HEAD FSH 3 BLADE FSB 0 NUTS (SET OF 4) FSN 0 Do not use a dull tool. Continuing to use a dull tool can cause it to break. Do not use the tool to pry. Too much leverage can cause the steel to break. Always use a tool for it's intended purpose only. Never strike a pneumatic or electric hammer tool with a hammer. Always keep pressure on the hammer or drill. Allowing the hammer or drill to dry fire can cause steel breakage. Examine tools regularly. Do not use the tool if any cracks are visible. Electric Hammer Steel Other Electric Hammer Steel Also Available For Kango, 3/4"Hex. Demo, Old Hilti etc. Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 13

Hitachi PH65 / Makita 68901-15" 3 ¼ 68901-18" 4 68901-24" 5 ¼ 68902-15" 3 ¼ 68902-18" 4 68902-24" 5 ¼ 3" WIDE CHISEL 68908-3"x15" 68908-3"x18" 68908-3"x24" 3 ¾ 4 ¼ 5 ½ 4" CLAY SPADE 68954 5 PIN DRIVERS BUSHING TOOL Other Sizes Available 68920-5/8" 3 ¾ 68920-3/4" 3 ¾ 68920-7/8" 3 ¾ 68920-1" 3 ¾ 68920-1-1/8" 4 68934 4 4" ASPHALT CUTTER 68955 5 FLOOR SCRAPER COMPLETE 68957 7 SHANK 68957S 3 ½ HEAD FSH 3 BLADE FSB 0 NUTS (SET OF 4) FSN 0 Electric Hammer Steel Specialty Tools Available Sharpening service includes reforging and rehardening your paving breaker steel, electric hammer steel, chipping hammer steel and more. Your steel will work like new again. Sharpening / Reforging Service 14 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Spline Drive 63901-12" 1 63901-18" 1 ¼ 63901-24" 1 ½ 63902-12" 1 63902-18" 1 ¼ 63902-24" 1 ½ 2" WIDE CHISEL 63908-2"x12" 1 63908-2"x18" 1 ½ CLAY SPADE 63954 5 3" WIDE CHISEL 63908-3"x12" 63908-3"x18" 1 ¼ 1 ¾ ASPHALT CUTTER 63955 5 PIN DRIVERS 4-1/2" Wide Chisels Available BUSHING TOOL Other Sizes Available 63920-5/8" 1 ¼ 63920-3/4" 1 ¼ 63920-1" 1 ¼ Carbide Bushing Tool Available 63931 2 ¾ FLOOR SCRAPER COMPLETE 63957 7 SHANK 63957S 3 ½ HEAD FSH 3 BLADE FSB 0 NUTS (SET OF 4) FSN 0 Tools for Boom Mounted Demo Hammers Micon Products supplies a wide range of high quality tools for Boom Mounted Demolition Hammers. Speacialty tools available. Spine Drive Drill Bits Also Available Please give us a call with the make and model of your hammer and we will be happy to meet your needs. POINT SHOTCRETE CHISEL CHISEL ASPHALT CUTTER Electric Hammer Steel Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 15

'H' Thread Drill Rods + Bits Under Under 7/8" x 4-1/4" SHANK 117-0213-1' 3 ¼ 117-0213-1'6" 4 ¼ 117-0213-2' 5 ¼ 117-0213-2'6" 6 ½ 117-0213-3' 7 ½ 117-0213-4' 8 ½ 117-0213-5' 11 ½ 117-0213-6' 13 ¾ 117-0213-8' 17 ¾ 117-0213-10' 22 117-0213-12' 26 ¼ 117-0213-14' 30 ¼ 7/8" x 3-1/4" Shank Also Available 1" x 4-1/4" SHANK 127-0313-1' 3 ¾ 127-0313-1'6" 5 127-0313-2' 6 127-0313-2'6" 7 ½ 127-0313-3' 10 ½ 127-0313-4' 11 ¼ 127-0313-5' 13 ¾ 127-0313-6' 16 ¼ 127-0313-8' 21 ¼ 127-0313-10' 26 ¼ 127-0313-12' 31 ¼ 127-0313-14' 36 ¼ Bit Size CARBIDE CROSS BIT 'H' THREAD H35MP 1 3/8" H38MP 1 ½" H41MP 1 5/8" H45MP 1 ¾" H48MP 1 7/8" H51MP 2 " H57MP 2 ¼" H64MP 2 ½" H76MP 3 " Our 'H' thread carbide cross bits are high quality for production drilling. Single pass carbide cross bits are also available Button bits also available Drill Steel Production Drill Steel R25, R32, R38, T38, T45 etc. We supply Drill Consumables in R25, R32, R38, T38, T45 and other threads. Couplers Adapter Couplings Bit Adapters Striker Bars Carbide Button Bits Carbide Cross Bits Extension Rods MF Speed Rods Tunnel Rods 16 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Under R25 (1" Rope) Thread Drill Rods + Bits Under 7/8" x 4-1/4" SHANK 30041-0 STRIKER BAR 3 ¼ 117-0241-1'6" 4 ¼ 117-0241-2' 5 ¼ 117-0241-2'6" 6 ½ 117-0241-3' 7 ½ 117-0241-4' 8 ½ 117-0241-5' 11 ½ 117-0241-6' 13 ¾ 117-0241-8' 17 ¾ 117-0241-10' 22 117-0241-12' 26 ¼ 117-0241-14' 30 ¼ 7/8" x 3-1/4" Shank Also Available 1" x 4-1/4" SHANK 31041-0 STRIKER BAR 3 ¾ 127-0341-1'6" 5 127-0341-2' 6 127-0341-2'6" 7 ½ 127-0341-3' 10 ½ 127-0341-4' 11 ¼ 127-0341-5' 13 ¾ 127-0341-6' 16 ¼ 127-0341-8' 21 ¼ 127-0341-10' 26 ¼ 127-0341-12' 31 ¼ 127-0341-14' 36 ¼ Bit Size Bit Size CARBIDE CROSS BIT R25 (1" ROPE) THREAD R25C35 1 3/8" R25C38 1 ½" R25C41 1 5/8" R25C45 1 ¾" R25C48 1 7/8" R25C51 2 " R25C57 2 ¼" R25C64 2 ½" R25C76 3 " CARBIDE BUTTON BIT R25 (1" ROPE) THREAD R25B35 1 3/8" R25B38 1 ½" R25B41 1 5/8" R25B45 1 ¾" R25B48 1 7/8" R25B51 2 " R25B57 2 ¼" R25B64 2 ½" R25B76 3 " Button Bits Are Available In Round or Semi Ballistic EXTENSION RODS R25 (1" ROPE) 727-4141-2' 5 727-4141-3' 7 ½ 727-4141-4' 10 727-4141-5' 6 ¼ 727-4141-6' 15 727-4141-8' 20 727-4141-10' 25 727-4141-12' 30 R25 COUPLING 226-4141 Drill Steel Sharpening: Micon Products can not be responsible for tools that have been sharpened by an outside source. Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 17

Integral Bits (Whirley Bits) Bit Size mm Bit Size Inches Under Drill Depth Integral Bits (Whirley Bits) 7/8" x 4 1/4" Shank 711-2117 17mm 5/8" 8" 6" 1 ¾ 711-3617 17mm 5/8" 14" 11½" 2 ¼ 711-2120 20mm ¾" 8" 6" 1 ¾ 711-3120 20mm ¾" 12" 10" 2 ¼ 711-4820 20mm ¾" 18" 16" 3 7/8" x 3 1/4" Also Available 3/4" x 4 1/4" Also Available 711-6320 20mm ¾" 24" 21" 3 ½ 711-2122 22mm 7/8" 8" 6" 1 ¾ 728-0422 22mm 7/8" 14" 11" 3 728-0425 25mm 1 " 14" 12" 3 728-0625 25mm 1 " 24" 22" 4 728-0627 27mm 1 1/16" 24" 22" 4 728-0429 29mm 1 1/8" 14" 11" 3 728-0432 32mm 1 ¼" 14" 12" 3 714-0632 32mm 1 ¼" 24" 22" 4 714-0834 34mm 1 3/8" 32" 30" 5 ¼ 728-0435 35mm 1 3/8" 14" 12" 3 714-0635 35mm 1 3/8" 24" 22" 5 728-0438 38mm 1 ½" 14" 12" 3 714-0638 38mm 1 ½" 24" 22" 4 714-0840 40mm 1 5/8" 32" 30" 5 ¼ 714-0641 41mm 1 5/8" 24" 22" 4 Other Sizes Available CP-9/MRD-9 Bits Drill Steel CP-9/MRD-9 Bits CP9-5/8x8 17mm 5/8" 13" 8" 1 ¼ CP9-5/8x12 17mm 5/8" 17" 12" 1 ¾ CP9-3/4x8 20mm ¾" 13" 8" 1 ¼ CP9-3/4x12 20mm ¾" 17" 12" 1 ¾ CP9-7/8x8 22mm 7/8" 13" 8" 1 ½ CP9-7/8x12 22mm 7/8" 17" 12" 2 CP9-1x8 25mm 1" 12" 8" 1 ½ CP9-1x12 25mm 1" 17" 12" 2 Other Sizes Available Points & Chisels also available for CP-9/MRD-9 Always wear safety glasses, ear protection and safety shoes/boots 18 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Integral Rods Under Bit Size mm Bit Size Inches Integral Rods 7/8" x 4 1/4" Shank 714-0635-2' 35mm 1 3/8" 5 ¼ 714-1234-4' 34mm 1 11/32" 9 ½ 714-1833-6' 33mm 1 19/64" 13 ¾ 714-2432-8' 32mm 1 ¼" 17 ¾ 714-3231-10'6" 31mm 1 7/32" 22 ½ 714-4030-13' 30mm 1 3/16" 28 ½ 714-4829-15'9" 29mm 1 5/32" 34 714-0834-2'7" 34mm 1 11/32" 7 7/8" x 3 1/4" Also Available 714-1633-5'3" 33mm 1 19/64" 12 714-0840-2'7" 40mm 1 37/64" 7 714-1639-5'3" 39mm 1 17/32" 12 714-2438-8' 38mm 1 ½" 17 ¾ 714-3237-10'6" 37mm 1 29/64" 22 ½ 714-4036-13' 36mm 1 27/64" 28 ½ 714-4835-15'9" 35mm 1 3/8" 34 714-5634-18'4" 34mm 1 11/32" 40 714-6433-21' 33mm 1 19/64" 46 714-0641-2' 41mm 1 5/8" 5 ¼ 714-1240-4' 40mm 1 37/64" 9 ½ 714-1839-6' 39mm 1 17/32" 13 ¾ 714-2438-8' 38mm 1 ½" 17 ¾ Other Sizes Available ed & Tapered Drill Rods + Bits Bit Size CARBIDE CROSS BIT 7/8" - 12 DEGREE 12D32C 1 ¼" 12D35C 1 3/8" 12D38C 1 ½" 12D41C 1 5/8" 12D45C 1 ¾" 7/8" x 4-1/4" SHANK 117-0270-2' 117-0270-4' 117-0270-6' 117-0270-8' 117-0270-10' 117-0270-12' 7/8" x 3-1/4" Shank Also Available 3 ¼ 4 ¼ 5 ¼ 6 ½ 7 ½ 9 ½ Drill Steel CARBIDE BUTTON BIT 7/8" - 12 DEGREE 12D32B 1 ¼" 12D35B 1 3/8" 12D38B 1 ½" 12D41B 1 5/8" 12D45B 1 ¾" Button Bits Are Available In Round or Semi Ballistic Specialty tools available on request. Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 19

Digging Bars Scaling Bars 1"HEX. BODY /2" WIDE CHISEL 810-1214-4' 810-1214-5' 810-1214-6' 810-1214-7' 810-1214-8' 810-1214-9' 810-1214-10' 810-1214-12' Moil Point/Angle Chisel Also Available 11 ¾ 14 ¾ 17 ¾ 20 ¾ 23 ½ 26 ½ 29 ½ 35 ¼ 7/8"HEX. STEEL BODY /ANGLE CHISEL 848-1011-4' 9 848-1011-5' 11 ¼ 848-1011-6' 13 ½ 848-1011-7' 16 848-1011-8' 18 848-1011-10' 22 ½ 848-1011-12' 27 Form Stripping Bars Aluminum Scaling Bars 1"HEX. BODY 815-1516-3' 815-1516-3'6" 815-1516-4' 815-1516-5' 815-1516-6' 815-1516-7' 815-1516-8' Goose Neck Nail Pullers 9 ½ 11 ¼ 12 ¼ 15 ¼ 18 ¼ 21 ¼ 24 ¼ 1"SQUARE ALUMINUM TUBING WITH STEEL TIPS 801-1011-4' 4 ½ 801-1011-6' 5 801-1011-8' 6 ½ 801-1011-10' 7 ½ 801-1011-12' 8 ½ 801-1011-14' 9 ½ 801-1011-16' 10 ¼ 801-1011-18' 11 ¼ 801-1011-20' 12 ¼ 801-1011-24' 14 ¼ Bars 1"HEX. BODY 815-1542-3' 10 ¼ 815-1542-3'6" 11 ¾ 815-1542-4' 13 ½ 815-1542-5' 16 ¼ 815-1542-6' 19 ½ 815-1542-7' 22 815-1542-8' 25 Sharpening: Micon Products can not be responsible for tools that have been sharpened by an outside source. We Manufacture Specialty Bars To Meet Your Needs 20 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products

Hole Size Wedge & Shim Sets WEDGE & SHIM SETS WF-5/8x2-3/4 5/8" 2 ¾" ¼ WF-3/4x3-3/4 ¾" 3 ¾" ½ WF-7/8x5 7/8" 5 " ¾ WF-1x6 1 " 6 " 1 ½ WF-1-1/4x8 1 ¼" 8 " 2 ¼ WF-1-3/8x12 1 3/8" 12 " 5 WF-1-3/8x18 1 3/8" 18 " 7 ½ WF-1-3/8x24 1 3/8" 24 " 10 Set Includes 1 Wedge & 2 Shims Wedges And Shims Also Sold Separately Rock Splitting & Trimming Hammers Micon Products manufactures a line of high quality rock splitting and stone trimming hammers used in stone masonry. Carbide Tipped Masonry Chisels We have a complete line of high quality Swedish made stone masonry and stone carving chisels. Please phone for a catalogue of our stone working tools or visit our website http://www.miconproducts.com. Always wear safety glasses, ear protection and safety shoes/boots Stone Splitting & Masonry Micon Products www.miconproducts.com Toll Free in North America: 1 866 683-1285 21

MICON PRODUCTS Ground Support for Mining & Construction We manufacture Scaling Bars, Split Set Driver Tools, Bar Spinners, Nut Runners and more. We are happy to supply special order tools for mining and construction in small or large quantities Hardware for Hollow Core Anchor Systems Micon Products is the supplier of couplings and sacrificial bits for MAI and Ibo hollow bar anchor systems. Hardened Steel Cross Bits Carbide Cross Bits Carbide Button Bits Couplers Adapter Couplings and more Standard threads are R25, R32, R38, R51. Other threads are available on request. Micon Products Ltd. 1325 Cartwright Street, Granville Island Vancouver, B.C. Canada V6H 3R7 Web: Info: http://www.miconproducts.com info@miconproducts.com Toll Free in North America 1 866 683-1285 Phone: 604) 683-1285 Fax: (604) 683-1597 22 Toll Free in North America: 1 866 683-1285 www.miconproducts.com Micon Products