SDS PLUS 4 Claw (4 Cutting Edges) SDS-Plus
|
|
- Edwin Floyd
- 7 years ago
- Views:
Transcription
1 MASONRY DRILL BITS
2 SDS-Plus Rotary Hammer with SDS chuck or SDS adapter 5/32"x6" to 1"x10" SDS-Plus Masonry Drill s are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type chuck. The bits are manufactured to conform with ANSI Standard B and can be used to drill concrete, block, brick and soft stone. Made in Germany. SDS PLUS /32 x 4 1/4 2 1 SDS PLUS /32 x 6 1/4 4 1 SDS PLUS /16 x 4 1/4 2 1 SDS PLUS /16 x 6 1/4 4 1 SDS PLUS /16 x /4 6 1 SDS PLUS /16 x SDS PLUS /32 x 6 1/4 4 1 SDS PLUS /32 x /4 6 1 SDS PLUS 142 1/4 x 4 1/4 2 1 SDS PLUS 144 1/4 x 6 1/4 4 1 SDS PLUS 146 1/4 x /4 6 1 SDS PLUS 149 1/4 x SDS PLUS /16 x 6 1/4 4 1 SDS PLUS /16 x SDS PLUS 384 3/8 x 6 1/4 4 1 SDS PLUS 386 3/8 x /4 6 1 SDS PLUS 388 3/8 x 10 1/4 8 1 SDS PLUS /8 x12 1/ SDS PLUS 124 1/2 x 6 1/4 4 1 SDS PLUS 12/2 x 10 1/4 8 1 SDS PLUS /2 x 12 1/ SDS PLUS 12/2 x SDS PLUS 126 1/2 x /4 6 1 SDS PLUS /16 x 6 1/4 4 1 SDS PLUS 584 5/8 x 6 1/4 4 1 SDS PLUS 586 5/8 x SDS PLUS /8 x SDS PLUS 346 SDS PLUS /4x8x6 Carbide 3/4x12x10 Carbide 6 1 SDS PLUS /8 x 12 1/ SDS PLUS 11 x SDS PLUS 110 1x12x10 Carbide 10 1 SDS PLUS 4 Claw (4 Cutting Edges) Quad Head SDS-Plus Carbide Drill s are designed to reduce vibration and noise. These bits produce rounder and more accurately located anchor holes. Made in Germany. SDS PLUS /16" x 4 1/4" 4C 2" 1 SDS PLUS /16" x 6 1/4" 4C 4" 1 SDS PLUS /16" x /4" 4C 6" 1 SDS PLUS /4" x 4 1/4" 4C 2" 1 SDS PLUS /4" x 6 1/4" 4C 4" 1 SDS PLUS /4" x /4" 4C 6" 1 SDS PLUS 414/4" x 10" 4C 8" 1 SDS PLUS /4" x 12" 4C 10" 1 SDS PLUS /16" x 6 1/4" 4C 4" 1 SDS PLUS /8" x 6 1/4" 4C 4" 1 SDS PLUS /8" x 12 1/4" 4C 10" 1 SDS PLUS /8" x 18" 4C 16" 1 SDS PLUS /2" x 6 1/4" 4C 4" 1 SDS PLUS /2" x 12 1/4" 4C 10" 1 SDS PLUS 412/2" x 18" 4C 16" 1 SDS PLUS 4586 SDS PLUS SDS PLUS 4348 SDS PLUS SDS PLUS 4788 SDS PLUS SDS PLUS 418 SDSPLUS 4116 SDS PLUS SDS PLUS /8x10x8 Carbide 4C 5/8x18x16 Caride 4C 3/4x10x8 Carbide 4C 3/4x18x16 Carbide 4C 7/8x10x8 Carbide 4C 7/8x18x16 Carbide 4C 1x10x8 Carbide 4C 1x18x16 Carbide 4C 11/8x10x8 Carbide 4C 11/4x18x16 Carbide 4C
3 SDS-Plus Bulk s (25 Per ) SDS PLUS 5324BP 5/32" x 6 1/4" 4" 25 SDS PLUS 3164BP 3/16" x 6 1/4" 4" 25 SDS PLUS 144BP 1/4" x 6 1/4" 4" 25 SDS PLUS 5164BP 5/16" x 6 1/4" 4" 25 SDS PLUS 384BP 3/8" x 6 1/4" 4" 25 SDS PLUS CS s SDS Plus CS () Drill s in the diameters listed are nominal size of 5/32" & 3/16" and are used with 3/16" and 1/4" "s" as a matched tolerance system. SDS PCS SDS PCS SDS PCS SDS PCS SDS PCS SDS PCS /32x5x2-3/8 5/32x6x3-1/8 5/32x7x4-1/8 3/16x5x2-3/8 3/16x6x3-1/8 3/16x7x4-1/8 2 3/ 3 1/ 4 1/ 2 3/ 3 1/ 4 1/ SDS Max 4 Claw Rotary Hammer with Spline chuck 1/2"x13" to 1 1/2"x23" SDS-Max Masonry Drill s are designed for use in a rotary hammer equipped with a SDS-Max chuck. The bits are manufactured to conform with ANSI Standard B and can be used to drill concrete, block, brick and soft stone. Made in Germany. SDS MAX 12712* 1/2" x 13" 7 1/2" 1 SDS MAX 1212* 1/2x 7x12 Carbide 12 1 SDS MAX * 1/2" x 21" 15 /12" 1 SDS MAX /8" x 13" 4C 7 1/2" 1 SDS MAX /8" x 21" 4C 15 1/2" 1 SDS MAX /8x36x30-1/2 Carbide 4C 30 1/2 1 SDS MAX /4" x 13" 4C 8" 1 SDS MAX /4" x 21" 4C 17" 1 SDS MAX /4x36x31 Carbide 4C 31 1 SDS MAX /8" x 13" 4C 8" 1 SDS MAX /8" x 21" 4C 17" 1 SDS MAX 41" x 13" 4C 8" 1 SDS MAX " x 21" 4C 17" 1 SDS MAX x36x31 Carbide 4C 31 1 SDS MAX /8" x 17" 4C 12" 1 SDS MAX /8" x 21" 4C 17" 1 SDS MAX /4" x 15" 4C 10" 1 SDS MAX /4" x 23" 4C 18" 1 SDS MAX /4" x 36" 4C 31" 1 SDS MAX SDS MAX SDS MAX /8x23x18 Carbide 4C 11/2x23x18 Carbide 4C 13/4x23x18 Carbide 4C *1/2" x 13" & 1/2" x 21" sizes are 2 Cutting Edges
4 Spline Rotary Hammer with Spline chuck 3/8"x10" to 1 1/2"x22" Spline Carbide Drill s are designed for use in a rotary hammer equipped with a spline type chuck. The bits are manufactured to conform with ANSI Standard B and can be used to drill in concrete, block brick, and soft stone. Both 4-X Cutter and single tip head styles are available. Made in Germany. SPLINE 385 3/8" x 10" 5" 1 SPLINE 388 3/8" x 13" 8" 1 SPLINE /8" x 16" 11" 1 SPLINE 125 1/2" x 10" 5" 1 SPLINE 12/2" x 13" 8" 1 SPLINE /2" x 16" 11" 1 SPLINE /2" x 22" 17" 1 SPLINE 585 5/8" x 10" 5" 1 SPLINE /8" x 16" 11" 1 SPLINE /8" x 22" 17" 1 SPLINE /4" x 16" 11" 1 SPLINE /4" x 22" 17" 1 SPLINE /8" x 16" 11" 1 SPLINE 111 1" x 16" 11" 1 SPLINE /8" x 22" 17" 1 SPLINE /4" x 22" 17" 1 SPLINE /2" x 22" 17" 1 Spline 4 Claw (4 Cutting Edges) Rotary Hammer with SDS chuck or SDS adapter 5/8"x10" to 2"x23" Spline Carbide Drill s are designed for use in a rotary hammer equipped with a spline type chuck. The bits are manufactured to conform with ANSI Standard B and can be used to drill in concrete, block brick, and soft stone. Both 4-X Cutter and single tip head styles are available. Made in Germany. SPLINE /8" x 10" 4C 5" 1 SPLINE /8" x 16" 4C 11" 1 SPLINE /8" x 22" 4C 17" 1 SPLINE /4" x 10" 4C 5" 1 SPLINE /4" x 16" 4C 11" 1 SPLINE /4" x 22" 4C 17" 1 SPLINE /8" x16" 4C 11" 1 SPLINE /8" x 22" 4C 17" 1 SPLINE " x 16" 4C 11" 1 SPLINE " x 22" 4C 17" 1 SPLINE /4" x 16" 4C 11" 1 SPLINE /4" x 22" 4C 17" 1 SPLINE /2" x 22" 4C 17" 1 SPLINE /4" x 23" 4C 18" 1 SPLINE " x 23" 4C 18" 1
5 HD - Straight Shank Hammer Drill 1/8"x3" to 3/4"x24" Heavy Duty Straight Shank Carbide s are designed for use in a hammer drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards and can be used to drill in concrete, block, brick and sodt stone. Made in Germany. HD 1813/8" x 3" 1 3/8" 1 HD /32" x 6" 4" 1 HD /32" x 3" 1 3/" 1 HD /16" x 3 1/2" 1 9/16" 1 HD /16" x 6" 4" 1 HD 1421/4" x 4" 2 1/8" 1 HD 144 1/4" x 6" 4" 1 HD /16" x 4 3/4" 2 3/4" 1 HD /16" x 6" 4" 1 HD /16" x 12" 10" 1 HD 384 3/8" x 6" 4" 1 HD /8" x 12" 10" 1 HD 124 1/2" x 6" 4" 1 HD /2" x 12" 10" 1 HD /8" x 6" 3 1/2" 1 Stop s SDS Plus DC (Depth Control) s in the diameters listed are used in the installation process with 1/4", 3/8" and 1/2" drop-in type fasteners. STOP STOP STOP STOP STOP /8x1-1/16 Stop 1/2x13/16 Stop 1/2x1-11/16 Stop 5/8x1-1/16 Stop 5/8x2-1/16 Stop 1 1/ 13/ 1 11/ 1 11/ 2 1/ Distributed by: Lackmond Products, Inc North Roberts Road, Suite 101, Kennesaw, GA beastblades.com
Drilling and Demolition
Drilling and Demolition Hilti. Outperform. Outlast. 18 Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR
More informationCLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationHUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast prestressed hollow core slabs
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast Anchor version HUS-A 6 Screw with hex head HUS-H 6 Screw with hex head HUS-I 6 Screw with hex head Benefits - Quick and easy setting - Low
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationMASONRY DRILLING TOOLS
MASONRY DRILLING TOOLS NOTES PAGE NO. ITEM POINTS TO REMEMBER MASONRY DRILLING INDEX ADAPTERS PLATE CUTTER...3 REBAR CUTTER...4 SDS - QUICK RELEASE...15 TAPER CHUCK...22 CHISELS ASPHALT CUTTER 5"...28
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationInstalling Shutters using Fasteners
Installing Shutters using Fasteners Electric drill, ¼" drill bit, 3 8" drill bit, hammer, and shutter fasteners. (¼" carbide drill bit is required for stucco, hardboard, fiber cement, brick or masonry.)
More informationCustomer Service 800.780.8889 or visit us online at smithnoble.com. Wood Shutters. Step by Step Installation. Troubleshooting Tips
reflect your style TM Customer Service 800.780.8889 or visit us online at smithnoble.com Wood Shutters Step by Step Installation Troubleshooting Tips Easy Care Instructions STEP 1 Your New Shutter Thank
More informationHUS-HR, CR Screw anchor, stainless steel
HUS-HR, CR Screw anchor, Anchor version HUS-HR 6 / 8 / 10 / 14 Stainless steel concrete Screw with hexagonal head HUS-CR 10 Stainless steel concrete screw with countersunk head Benefits - High productivity
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationPolicy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL 5kg SDS Plus Rotary Hammer Drill BH26S3 Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from
More informationHUS-HR Stainless steel Concrete Screw A4 316. CE conformity. Corrosion resistance. European Technical Approval
HUS-HR screw anchor Anchor version Benefits HUS-HR Stainless steel Concrete Screw Quick and easy setting Low expansion forces in base materials Through fastening Removable Forged-on washer and hexagon
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-2369 Reissued May 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationSubmittal Information
Wedge SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchs feature a stainless steel expansion clip, threaded stud body, nut and washer. Anch bodies are made of plated carbon steel, hot-dipped galvanized
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationONSITE OFFERS ISSUE 41 AUGUST 2015
ONSITE OFFERS ISSUE 41 AUGUST 2015 TOOL CONNECT THE INTELLIGENT WAY TO MANAGE YOUR CORDLESS SYSTEM 18V XR TOOL CONNECT CONNECT A BATTERY TO A SMARTPHONE OR TABLET INVENTORY MANAGEMENT SECURITY SERVICE
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationDIVISION: 04 00 00 MASONRY SECTION: 04 05 19.16 MASONRY ANCHORS REPORT HOLDER: HILTI, INC. 7250 DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-3342 Reissued 08/2015 This report is subject to renewal 08/2017. DIVISION: 04 00 00 MASONRY
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationHilti HIT-HY 150 MAX with rebar
Hilti HIT-HY 150 MAX Injection mortar system Hilti HIT- HY 150 MAX 330 ml foil pack (also available as 500 ml and 1400 ml foil pack) Static mixer rebar BSt 500 S Benefits - suitable for non-cracked and
More informationOperations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn
Safety.. Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Technical: Zinc plated forged heat treated steel,
More informationREDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES Tools Required Tape Measure Hammer Slotted Screw Driver #2 & #3 Philips Screw Driver 3-4 Foot Level 12 Pry Bar Cold Chisel
More informationWM002 LCD Display Wall Mounting Kit Installation Guide. Welcome
WM002 LCD Display Wall Mounting Kit Installation Guide Welcome Copyright Copyright 2006 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationRotary Hammer HR2800 HR2810 HR2810T HR2811F HR2811FT INSTRUCTION MANUAL. IMPORTANT: Read Before Using. DOUBLE INSULATION
ENGLISH (Original instructions) INSTRUCTION MANUAL Rotary Hammer HR800 HR80 HR80T HR8F HR8FT 00803 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Capacities
More informationHilti HIT-HY 200 with rebar
Hilti HIT-HY 200 Injection mortar system Benefits Hilti HIT- HY 200-A 500 ml foil pack (also available as 330 ml) Hilti HIT- HY 200-R 500 ml foil pack (also available as 330 ml) Static mixer rebar BSt
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationSAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3
SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More informationHVU with HAS/HAS-E rod adhesive anchor
HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod adhesive anchor Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationIntroduction to Door Construction
Entry Door Construction Made Simple with Freud s Entry & Interior Door Router Bit System Congratulations on your purchase of Freud s Entry & Interior Door Router Bit System. This unique set allows you
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationTZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
SECTION 2.2 PAGE 1 / 9 l DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic tension and shear loads
More informationwww.blackanddecker.co.uk Ireland Australia New Zealand
www.blackanddecker.co.uk 8 6 7 5 3 4 1 2 UK Ireland Australia New Zealand 9 8 A 7 10 6 11 13 12 6 11 B C 16 14 15 17 5 D 2 13 E 8 9 F 3 Intended use Your Black & Decker rotary hammer drill has been designed
More informationHollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
More informationHUS-V Screw anchor. HUS-V Screw anchor. Basic loading data (for a single anchor) Mean ultimate resistance
HUS-V Screw anchor Anchor version HUS-V 8 / 10 Carbon steel concrete screw with hexagonal head Benefits - High productivity less drilling and fewer operations than with conventional anchors - Technical
More informationHSL-3 Heavy duty anchor carbon steel. Anchor Fastening Technology Manual HSL-3. Heavy duty anchor. Version 2015-09 09 / 2015 1
Anchor Fastening Technology Manual HSL-3 Heavy duty anchor HSL-3 Heavy duty anchor Version 2015-09 09 / 2015 1 HSL-3 Heavy duty anchor, Anchor version Sizes Benefits HSL-3 Bolt version Threaded rod version
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationDRILLS MODEL DESCRIPTION PART NO. M.R.P.
DRILLS GBM 6 6mm High Speed Drill - 4000 rpm 0 601145 107 3225 GBM 10 10 mm Heavy Duty High Torque Drill 0 601 135 090 4200 New! GBM 10 RE 10 mm Heavy Duty High Torque Drill, Reversible 0 601 4735KO 4750
More informationHUS-HR, CR Screw anchor, stainless steel
HUS-HR, CR Screw anchor stainless steel HUS-HR, CR Screw anchor, stainless steel Anchor version HUS-HR 6 / 8 / 10 / 14 Stainless steel concrete Screw with hexagonal head HUS-CR 10 Stainless steel concrete
More informationTENSION ISSUES? ROLLER SEE PAGE 7
ROLLER TENSION ISSUES? SEE PAGE 7 Roller Shade Installation Guide Important: If you have ordered a valance for your shade, you must first read the Valance Installation Guide found in your box. We make
More informationCutting the World. Cutting tools. for rotary drum cutters
Cutting the World Cutting tools for rotary drum cutters Round attack picks, pick boxes, retaining clips for erkat rotary drum cutters and cutter wheels erkat rotary drum cutters work under extremely hard
More informationPanel Track Installation Guide
Panel Track Installation Guide We make it easy! BTG 493361 EN_0510 Before starting Your new Blinds To Go panel track is custom made to your specifications from the finest materials available. To ensure
More informationMaking Soft Jaws for a Bison 3 Jaw Lathe Chuck
Making Soft Jaws for a Bison 3 Jaw Lathe Chuck By R. G. Sparber Copyleft protects this document. 1 My Bison lathe chuck has served me well for many years. One of its features is the ability to remove the
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationHow to Install Pavers
1 of 6 9/11/2012 10:41 AM How to Install Pavers Looking to give your property a durable driveway, a whimsical walkway, or a patio with pizazz? If you're reading this article, you're probably already on
More informationHammer Drill JCB-HD900-2
Safety and operating manual Hammer Drill JCB-HD900-2 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
More informationRotary Hammer / Combination Hammer
ENGLISH (Original instructions) INSTRUCTION MANUAL Rotary Hammer / Combination Hammer HR300 HR30T HR600 HR60 HR60 HR60T HR6F HR6FT 007 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original
More informationHorizontal Mini Blinds Installation Guide
Horizontal Mini Blinds Installation Guide We make it easy! BTG 468298 EN_ rev0614 For more safety information: 1-866-662-0666 or.www.healthcanada.gc.ca/blindcords Before starting Your new Blinds To Go
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions BO01 PATIO COVER/CARPORT Model No. PC1010 Attached 705220511 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to
More informationBUTE Department of Construction Management and Technology
BUTE Department of Construction Management and Technology 02.10.2012 Definition 1: Foundation: The structure, that transmits the load of the building to the soil Definition 2: Load bearing soil (strata):
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions BL01 PATIO COVER/CARPORT Model No. PC1020 Attached 705120511 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to
More informationQuick change SDS converter for regular percussion power tools
Quick change SDS converter for regular percussion power tools This converter adapts regular percussion impact machines to receive SDS shank tools. Quick change of SDS shank tools through the axial sliding
More informationCNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
More informationAccessories Catalogue 2013 / 14
ccessories Catalogue 2013 / 14 2 Contents Page No. brasive Paper 99 102 ngle Grinder System ccessories / FIXTEC Nut 96 97 and Saw lades 118 atteries 146 iscuit Jointer ccessories 139 Caulk and dhesive
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationBasement Window Installation Guide Hopper and Sliding
Basement Window Installation Guide Hopper and Sliding americancraftsmanwindows.com Project Requirements: Installation must comply with all applicable building codes. Existing window frame, wall and weatherresistant
More informationPhone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
More informationCEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. North America Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings North America Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
More informationMachine Tool Facilities
TECHNOLOGY 1721 LARKIN-WILLIAMS ROAD FENTON, MO 63026 IN C. 636/349-7680 FAX: 636/349-6608 Machine Tool Facilities CNC SWISS MACHINES (1) Citizen C-16 Contouring, Threading, Milling, Slotting, Cross Work
More informationTechnique Guide. Screw Removal Set. Instruments for removing Synthes screws.
Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact
More informationRaised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
More informationORDER /RENDELÉS : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62
/ : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62 ORIG. 001. X50000 1 mm DRILL METAL DECKER 1 mm METAL / / METAL DRILL INPUT RANGE OF QUALITY BRAND.
More informationBatibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
More informationTHE ORIGINAL UNI-LOC PIN INSTALLATION PROCEDURE 321D REV03 5/19/08
THE ORIGINAL UNI-LO PIN INSTALLATION PROEDURE 321D 03 5/19/08 1 UNI-LO Pins are best installed during the latter stage of finishing the butt. It is suggested to maintain less than.002 run-out in the front
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationHUS-H Screw Anchor. Technical data. Seismic design data. HUS-H Carbon steel screw anchor. HUS-H diameter 8, 10, 14. Seismic design data
Technical data HUS-H Carbon steel screw anchor HUS-H diameter 8, 10, 14 10 / 011 Version 011-10 1 HUS-H screw anchor seismic design data Anchor version Carbon steel screw Benefits - Quick and easy setting
More informationFree-Form Concrete Pool
The tranquil beauty and playful shimmer of a reflecting pool or fountain is just the thing to enhance the charm of your garden or patio. Best of all, you can do all the work yourself. Add goldfish or water
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationHilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor
Hilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor Supplement to Hilti North American Product Technical Guide Volume 2: Anchor Fastening Technical Guide 2011 Edition 3.3. KWIK
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationSeven. Easy Steps. Your Own Walkway, Without Mortar. or Concrete. to Installing. Driveway and Patio
Seven Easy Steps to Installing Your Own Walkway, Driveway and Patio Without Mortar or Concrete Brick is one of the world s oldest and most enduring building materials. Those same qualities also make it
More informationfor MANUAL MILLING MACHINES
UC RIVERSIDE MECHANICAL ENGINEERING DEPARTMENT MACHINE SHOP STANDARD OPERATING PROCEDURES for MANUAL MILLING MACHINES REVISION: V5 DATE: 11-15-2011 TABLE OF CONTENTS SECTION TOPIC(S) PAGE Basic Capabilities
More informationSamuel Shorty Bunk Bed
Samuel Shorty unk ed - Please keep for future reference / 88/999 0/8 IMPORTANT NOTE: The top surface of the mattress should not come above this line. imensions Width - 8cm epth - 8cm eight - 0cm IMPORTANT
More informationTRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
More information(English language translation, the original version is in French language) SPIT HIT M. Société SPIT Route de Lyon F-26501 BOURG-LES-VALENCE France
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tel. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationMETALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationPads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationcomprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationThis Addendum supplements and clarifies the contents of Service Bulletin SB 12-11-09
SERVICE BULLETIN 12-11-09 ADDENDUM Issue Date: 13-01-08 This Addendum supplements and clarifies the contents of Service Bulletin SB 12-11-09 NOTE: The service bulletin available for download has been updated
More informationHigh Capacity Helical Piles Limited Access Projects
High Capacity Helical Piles Limited Access Projects Tel 403 228-1767 Canada, USA, Russia Brendan ODonoghue 519 830-6113 Presentation Summary 1. Helical piles Background on large diameter shafts and helices
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More informationUDDEHOLM IMPAX SUPREME
UDDEHOLM IMPAX SUPREME Uddeholm Impax Supreme is a premium prehardened mould steel with very good polishing and texturing properties. Uddeholm Impax Supreme is available in a very wide dimensional range,
More informationEuropean Technical Approval ETA-13/0235
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationSierra. Signature Kitchen Dimensions & Installation Guidelines
Sierra Signature Kitchen Dimensions & Installation Guidelines OUTDOOR LUXURY MADE SIMPLE, IN JUST 5 STEPS! Eldorado Outdoor Signature Kitchens are an easy solution to creating the timeless look and feel
More informationInstallation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale
Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationHURRICANE MITIGATION RETROFITS FOR EXISTING SITE-BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES
HURRICANE MITIGATION RETROFITS FOR EXISTING SITE-BUILT SINGLE FAMILY RESIDENTIAL STRUCTURES 101 Retrofits Required. Pursuant to Section 553.844 553.884, Florida Statutes, strengthening of existing site-built,
More informationSLIDING PATIO DOOR INSTALLATION INSTRUCTIONS USING FRAME SCREWS
Vinyl Windows and Doors Manufactured by Pella Corporation Part Number: V984528 2012 Pella Corporation SLIDING PATIO DOOR INSTALLATION INSTRUCTIONS USING FRAME SCREWS Installation Instructions for Typical
More informationDiamond Coring. Diamond Coring. Hilti. Outperform. Outlast.
Diamond Coring Hilti. Outperform. Outlast. 72 Diamond coring tools Diamond coring tool DD EC-1 Page 74 Diamond coring tool DD 120 Page 75 Diamond coring tool DD 160 Page 76 Diamond coring tool DD 200 Page
More information