OMEGADYNE An OMEGA Engineering Company Engineered Solutions PRESSURE FORCE LOAD STRAIN CUSTOM DESIGNS
OMEGADYNE...When Simply the Best is Required! Mil-Spec, Aerospace and Rugged Commercial Products On-Board Gas Generation Systems Fuel Delivery Systems Refrigeration Systems Weapons Systems Hydraulic Systems Satellite Fuel Pressure Rocket Fuel Supply Systems Mine Detection Systems Submarine Pressure Switches Flight-Certified Pressure Transducers Mil-Spec Marine Transducers Military & Commercial Aircraft Surface & Sub-Surface Vessels Diffused Semiconductor High Stability Zero Creep High Shock and Vibration Performance Showcased in a rugged stainless steel TO-8 package, the PX4600 is at the heart of many of our flight-certified pressure transducers. The small size and light weight of the PX4600 Series and typical MTBF of 100,000 hours make them ideal for tough vibration and shock environments found in the harshest aerospace and industrial environments. The unusually high performance of this transducer comes from the 4-active-arm-bridge sensor using a micro-machined diffused silicon diaphragm and proprietary thin-film media and dielectric isolation barriers. Laser-trimmed resistors provide excellent temperature compensation from -55 to 121 C (-65 to 250 F), and adjust the zero balance and span to very tight tolerances. Custom treatments, such as heat cycling and stress aging, are available to further enhance the performance of the PX4600 transducer. PX4600 Series STARTS AT $ 295 Sputtered Thin Film High Accuracy High Durability All Stainless Steel Wetted Parts The sputtered thin-film technology is the core of our PX5000 Series transducers. The strain gages are molecularly bonded to a stainless steel sensing beam, resulting in all stainless steel wetted parts and superior performance. This technology, combined with advanced assembly techniques, typically has a long-term stability of 0.1% for 18 months, a combined static error band (linearity, hysteresis, repeatability) of 0.1%, and excellent shock and temperature characteristics. Certain models can operate safely up to 175 C (350 F). Showcased here in a stainless steel case, the PX5000 element is in many of our Mil-Spec qualified transducers, such as the PX2421 and PX2471 marine transducers. PX5000 Series STARTS AT $ 750 Custom Solutions You can rely on OMEGADYNE for the most sophisticated custom engineering in the process measurement, automation, and control industries. Our capabilities go far beyond the products in our handbook, reinforcing our customer-driven philosophy. Whether you need a simple modification of a standard product or a fully customized system, OMEGADYNE has the solution. Our commitment to excellence established our reputation. Continuing investment in research, development, manufacturing, and customer service keeps us at the forefront of technology. 2 Mil-Spec and Agency Approved Sensors OMEGADYNE has a long history of manufacturing pressure, torque, load, and force sensors for military and governmental users. Indeed, we specialize in solving the unique problems of this important segment. We have more than 10,000 products, including Mil-Spec qualified transducers for land, sea, air, and space applications. From the ocean floor to the reaches of outer space, products designed and built by OMEGADYNE are meeting the most demanding specifications imaginable. CEC TM Pressure Products
PRESSURE GAGE ABSOLUTE VACUUM DIFFERENTIAL BAROMETRIC Ranges from 10 inh 2 O up to 100,000 psi. Differential Transducers. Miniature Sizes. Flush Mount. Sub Sea. Mil-Spec. Enhanced Long-Term Stability, Millivolt, 4 to 20 ma, 0 to 5 and 0 to 10 V outputs. MOST POPULAR SENSORS STOCKED AND READY FOR FAST DELIVERY! LOAD TENSION COMPRESSION TENSION AND COMPRESSION Ranges from 10 g to 2,000,000 lb. Accuracies as high as 0.02%. Miniature. Subminiature. Fatigue or Submersible. Mil-Spec. Millivolt, 4 to 20 ma, 0 to 5 and 0 to 10 V outputs. 3
Pressure Transducers The PX309/319/329 Series of high-performance all stainless steel transducers feature a precision solid state sensor and pressure ranges from 0-1 to 0-10,000 psi. Available in 3 connection styles, the sensors are rated IP65, have a typical accuracy of 0.25%, and are available in absolute and gage models. Outputs include mv, 0 to 5 Vdc, and 4 to 20 ma. Five-point NIST-traceable calibration is available. STARTS AT $ 175 NEW! Military-Qualified Transducer The Mil-Spec rated PX2422 works in ship and submarine applications and features 4 to 20 ma output and pressure ranges from 15 to 10,000 psi. The device is rated MIL-P-24212C(SH). Custom variations include pressure ranges down to ±10 inwc. 120 Vac powered models also available. SPECIAL QUOTATION PX319-100GV, $175 with mini DIN connector PX309-100GV, $175 with wire leads PX329-100GV, $215 twist-lock connector Mil-Spec Transducer for New Construction Naval applications The model PX2471 Pressure Transducer has been designed to meet the stringent requirements of military standard MIL-T-24742(SH) and when invoked ASTM F2070. Applications include naval shipboard use, both surface and sub-surface vessels as well as general maritime uses. The PX2471 is available in pressure ranges from 15 to 10,000 psi. The output signal is 4 to 20 ma (2-wire current) widely used for recording and control purposes. SPECIAL QUOTATION Load Cells OMEGADYNE manufactures one of the most comprehensive range of tension, compression, miniature, and universal load cells in the industry. Our load cell stocking program is unparalleled. Most standard products are available for same-day shipment and can be modified to suit any demanding application. STARTS AT $ 270 LCR-2K, $280 Meters OMEGADYNE also offers a complete line of meters for all your instrumentation needs. STARTS AT $ 225 Rod ends, REC-012M, $35, sold separately. LCR-1K, $270 4
OMEGADYNE Solutions for Industry Industrial Test and Measurement Multiple Technologies Diffused Silicon Sputtered Thin Film Thick Film (Foil) Sensors for: Lab Environments Test Stands Process Monitoring Process Control Automotive Testing Engine Testing Powertrain Testing Dynamometer Applications Oil Pressure Brake Testing Valve Seat and Guide Applications Transmission Testing Tire and Rubber Testing Automotive Assembly Materials Testing Labs Fatigue Related Load Cells Mechanical Overload Stops Miniature Sizes High Accuracies Flush Diaphragm Pressure Sensors Tensile Testing Pneumatic/Hydraulic Testing Life Cycle Testing Sample Inspecting Automated Assembly Force-Displacement Monitoring Press Fit Monitoring Pick and Place Count/Batch Applications Packaging and Assembly OEMs Consultative Approach to Developing an Application Specific, Cost-Effective Product Selection Complete Custom, Modified Standard or High Volume, Low-Cost Sensors Available Ongoing Investment in Stocked Product or Custom Product to Accommodate Unpredictable Scheduling Changes A Variety of Existing Products Poised to Meet OEM Needs Both in Price and Delivery Aerospace Testing Sputtered Thin-Film Technology Aerospace Products Since the 1930s Landing Gear Testing Brake Force Validation Fuel Delivery Flight Simulation Jet Engine Test Stands Ground Support Test Equipment Semiconductor Wafer Production Crystal Slicing Crystal Pulling Planarizing Wafer Fabrication Desposition Photolithography Planarazation Gas Purifiers Packaging and Assembly Die Attachment Wire Bonding Probe Testing Wire Pull Testing Encapsulation 5
INSTRUMENTS Strain/Process Meters STARTS AT $ 245 Pressure Instruments and Calibrators STARTS AT $ 295 i Series DPi8C, $285. DP25B, $245. HHP-90, $295. PCL341, $1495. DP41-B, $595. DPG4000-KIT, $1395. How to Order USA AND CANADA OMEGADYNE, Inc. 149 Stelzer Court Sunbury, Ohio 43074 USA TELEPHONE International: (740) 965.9340 24 hour FAX: (740) 965.9438 E-MAIL info@omegadyne.com TERMS We are pleased to extend terms of net 30 days to all customers who have established an open account with OMEGADYNE. All shipments will be F.O.B. Sunbury, Ohio. OMEGADYNE welcomes new accounts and will process orders on a C.O.D. or a prepaid basis when an open account is being established. Prepayment checks should be mailed to the address to the right. PRICES The prices of goods sold are those in effect at the time of sale. The prices listed are those in effect at the time of publication and are subject to change without notice. Please contact OMEGADYNEs Sales Department for current prices. OMEGADYNE will be pleased to furnish quotations either by mail, e-mail, telephone, FAX, or Telefax upon request. QUANTITY DISCOUNTS Many items have quantity discount schedules. For large quantities and for products which do not have discount schedules listed, please consult the Sales Department. CREDIT CARDS OMEGADYNE is pleased to honor major credit cards for your ordering convenience. VISA, MasterCard and American Express are accepted. PAYMENTS BY CHECK OMEGADYNE, Inc. P.O. Box 18361 Newark, New Jersey 07191 USA PAYMENTS BY TRANSFER Contact Receivables Dept. Phone: (740) 965-9340 Fax: (740) 965-9438 ADDITIONAL PAYMENT INFO U.S. Federal Tax I.D. #042826774 OMEGA Engineering, Inc. OMEGADYNE AFFILIATED COMPANIES Newport Electronics, Inc. OMEGA Vanzetti omega.com newportus.com vanzetti.com 2007 OMEGADYNE, INC.