Where legislation does not explicitly restrict or limit the use of lead containing coatings it is the responsibility of the client to inform International Paint in writing of their specific requirements Technical Specification C.C.G.S Halifax (NS), Canada Hart, N. Nicole Hart Akzo Nobel Coating Ltd. (Canada) Suite 2, 250 Brownlow Avenue Dartmouth, Nova Scotia B3B 1W9 Canada Technical Specification Estimate areas accordingly Thinners not included in the estimate 1
Main Schemes Area Description Area ft² Upper External Decks An Intershield 300 abrasion resistant aluminium pure epoxy epoxy primer scheme using Intershield 9G low solar absorbing, low temperature cure, high solids epoxy deck coating for general areas. Upper Deck Non-Traffic Areas An Intershield 300 abrasion resistant epoxy scheme directly overcoated with an polyurethane finish, Interthane 990. 500ft² 6,700ft² Alternative Schemes Area Description Area ft² Upper External Decks with Interthane 990 An Intershield 300 abrasion resistant aluminium pure epoxy epoxy primer scheme using Intershield 9G low solar absorbing, low temperature cure, high solids epoxy deck coating for general areas. 6,700ft² 2
Upper External Decks [6,700ft²] An Intershield 300 abrasion resistant aluminium pure epoxy epoxy primer scheme using Intershield 9G low solar absorbing, low temperature cure, high solids epoxy deck coating for general areas. Surface Preparations Fresh water wash to remove all dirt and contamination, as necessary. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to application.blast to Sa2 ISO 8501-1 or SSPC SP6. Product Sales Code Colour Coats WFT Mils Volume Solids DFT Mils Intershield 300 ENA301/A Aluminium 100% SC 0.0 60 0.0 30 342.23 GTA220 GTA220, Intershield 300 ENA301/A Aluminium FC 8.3 60 5.0 30 136.89 GTA220 GTA220, Intershield 6GV EGA650/A Dark Grey FC 55.6 90 50.0 30 20.53 _ GTA220, GTA415 % Loss factor PSR (ft²/us Thinner Cleaner Volume US Gal 72.2 _ 60.0 452.4 Upper Deck Non-Traffic Areas [500ft²] An Intershield 300 abrasion resistant epoxy scheme directly overcoated with an polyurethane finish, Interthane 990. Surface Preparations Fresh water wash to remove all dirt and contamination, as necessary. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to application.blast to Sa2 ISO 8501-1 or SSPC SP6. Product Sales Code Colour Coats WFT Mils Volume Solids DFT Mils Interthane 990 FC 3.5 57 2.0 30 325.12 GTA056, % Loss factor PSR (ft²/us Thinner Cleaner Volume US Gal 20.1 _ 12.0 8.7 GTA056, 19.6 335.0 3.6 3.6 1.5 3
Alternative Schemes - Upper External Decks with Interthane 990 [6,700ft²] An Intershield 300 abrasion resistant aluminium pure epoxy epoxy primer scheme using Intershield 9G low solar absorbing, low temperature cure, high solids epoxy deck coating for general areas. Surface Preparations Fresh water wash to remove all dirt and contamination, as necessary. Degrease according to SSPC-SP1 solvent cleaning. Ensure area is clean and dry prior to application.blast to Sa2 ISO 8501-1 or SSPC SP6. Product Sales Code Colour Coats WFT Mils Volume Solids DFT Mils Intershield 300 ENA301/A Aluminium 100% SC 0.0 60 0.0 30 342.23 GTA220 GTA220, Intershield 300 ENA301/A Aluminium FC 8.3 60 5.0 30 136.89 GTA220 GTA220, Intershield 6GV EGA650/A Dark Grey FC 55.6 90 50.0 30 20.53 _ GTA220, GTA415 Interthane 990 PHK724/A Storm Grey FC 3.5 57 2.0 30 325.12 GTA056, % Loss factor PSR (ft²/us Thinner Cleaner Volume US Gal 75.7 _ 62.0 473.0 GTA056, 19.6 335.0 20.6 4
Product List Product Colour Sales Code Volume Solids (%) Volume (US Gal ) Intershield 300 Bronze ENA300/A 60 59.5 Intershield 300 Aluminium ENA301/A 60 70.0 Intershield 6GV Dark Grey EGA650/A 90 335.0 Interthane 990 57 2.0 5
Application Notes 6
Terms and Conditions This confidential document is for the use of the above named client and its contents should not be reproduced or transmitted without prior written permission from International Paint. The information is given in good faith and attention to the following statement : The information given in this report is not intended to be exhaustive and any person using any products for any purpose other than that specifically recommended in this report without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. Any warranty, if given, or specific Terms & Conditions of Sale are contained in International Paints Terms and Conditions of Sale, a copy of which can be obtained on. Whilst we endeavour to ensure that all advice we give about the product (whether in this report or otherwise) is correct we have no control over either the quality or condition of the substrate or the many factors affecting the use and application of this product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever for howsoever arising for the performance of our products or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this report is liable to modification from time to time in the light of experience and our policy of continuous product development. It is the user's responsibility to check that upto date product data sheets are obtained prior to using the products and that local environmental controls that may be in force are observed when using any of our products. Health & Safety Products referred to in this report are intended for use only by professional applicators in industrial situations in accordance with the advice given on our Technical Datasheetst, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS). All work involving the application and use of this product should be performed in compliance with all relevant national Health, Safety & Environment standards and regulations. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. If in doubt regarding the suitability of use of this product, consult International Paint for further advice. 7