HSM ENVIRONMENTAL TECHNOLOGY HSM Multistage shredder systems DuoShredder 5540.2, DuoShredder 5750, TriShredder 6060 Specially shaped cutting rollers for maximum efficiency High throughput of 350 kg to 2.5 tons per hour and excellent price-/performance ratio Can be used as a complete disposal system in combination with HSM baling press
HSM DuoShredder 5540.2 Power x 2 for professionals The HSM DuoShredder 5540.2 is a two-stage shredder system for fully automatic document disposal. Depending on the paper quality, loading and downstream systems, it can achieve a throughput of up to 350 kg per hour. In combination with an HSM baling press, you can expand the HSM DuoShredder 5540.2 into a complete disposal system. We recommend the following baling presses: HSM KP 100.1, HSM KP 98 and HSM KP 88.1. Technical features: Sturdy hopper with built-in overcharge protection to control the shredder and the conveyor belt Stage 1: pre-shredding using a two-shaft system with partially raised teeth for improved material intake Light barrier monitors filling level between stages 1 and 2 to prevent overflow Stage 2: downstream shredding using a two-shaft system Optionally available with material collection trolley for solo operation, volume approx. 320 litres Optionally available with electrohydraulic pre-compactor to remove jams in the hopper; the material to be shredded is automatically pushed against the cutting rollers Stage 1: HSM V 550 pre-shredder Particle size 20 x 155 mm Stage 2: HSM P 400.2 downstream shredder Particle size 5.8 x 50 mm
HSM DuoShredder 5750 Smart, sturdy and powerful The HSM DuoShredder 5750 is a two-stage, fully automatic document disposal system; the basic version consists of an HSM V 550 pre-shredder and an HSM P 500.2 downstream shredder. Depending on the type of material, it can achieve an efficient throughput of up to 800 kg per hour. In combination with an HSM baling press, you can expand the HSM DuoShredder 5750 into a complete disposal system. We recommend the following baling presses: HSM KP 100.1, HSM KP 98 and HSM KP 88.1. Technical features: Sturdy hopper with built-in overcharge protection to control the shredder and the conveyor belt Stage 1: pre-shredding using a four-shaft system consisting of two intake shafts and two cutting shafts with partially raised intake teeth Light barrier monitors filling level between stages 1 and 2 to prevent overflow Stage 2: downstream shredding using a two-shaft system Light barrier monitors filling level after stage 2 to prevent overflow Robust frame construction with service and maintenance doors Optionally available with material collection trolley for solo operation, volume approx. 320 litres Stage 1: HSM V 570 pre-shredder Particle size 20 x 155 mm Stage 2: HSM P 500.2 downstream shredder Particle size 6 x 40-53 mm.
HSM TriShredder 6060 Maximum throughput HSM ENVIRONMENTAL TECHNOLOGY The 3-stage HSM TriShredder 6060 shredding system consists of three perfectly attuned cutting devices for a throughput of up to 2500 kg per hour. In addition to this power, the HSM TriShredder 6060 also stands out because of its security features. At DIN 32757-1 security level 3, it is suitable for confidential documents. It can reliably shred entire binders and telephone directories, and can be used for other materials. Ask HSM for details. In combination with an HSM baling press, you can expand the HSM TriShredder 6060 into a complete disposal system. Stage 1: HSM V 600 pre-shredder Particle size 25 x 160-200 mm. Technical features: Sturdy hopper for passing material from the conveyor belt to the HSM V 600 pre-shredder Light barriers for system control Stage 1: pre-shredding using a four-shaft system consisting of two intake shafts and two cutting shafts with partially raised intake teeth Stages 2 and 3: downstream shredding using a two-shaft system Powerful motor with a total output of 6 x 9.2 kw State-of-the-art PLC controller for integrated control of all system components Optionally available with extension mechanism for 2nd and 3rd shredder stage for setting the required particle size Stage 2: HSM P 600 downstream shredder Particle size 10.5 x 40-76 mm. Stage 3: HSM P 600 downstream shredder Particle size 7.5 x 40-80 mm.
HSM DuoShredder and TriShredder: Power and security at every stage Details and combined solutions: HSM DuoShredder 5540.2 solo with accessories: conveyor belt and collection trolley HSM DuoShredder 5540.2 accessories: Electrohydraulic pre-compactor in loading hopper with integrated overcharge protection for special materials HSM TriShredder 6060 optionally available with extension mechanism for 2nd and 3rd shredder stage, removable hopper is inserted automatically Control cabinet for system components, starting the entire system and automatic control via light barrier Disposal system of HSM DuoShredder 5540.2 and HSM KP 98 baling press Disposal system of HSM DuoShredder 5750 and HSM KP 100.1 baling press Advantages of the HSM multistage shredder systems: Can be fed with a conveyor belt or discharging chute (DuoShredder) or other conveying system (TriShredder) Specially shaped cutting rollers for maximum efficiency Shreds to DIN 32757-1 security level 3 With specially hardened cutting rollers to minimise wear Automatic stop and reverse in the event of a paper jam The entire system is switched to automatic mode and the material to be destroyed is fed into the hopper of the conveyor belt. The system is started using the controls in the cabinet. Solid, sturdy steel construction High-quality drive components Optimum user protection ensured by safety circuit Can be combined with various HSM baling presses to form a complete disposal system Technical data: HSM DuoShredder 5540.2 HSM DuoShredder 5750 HSM TriShredder 6060 Motor in kw: Stage 1 = 4 / Stage 2 = 5.5 Stage 1 = 2 x 4 / Stage 2 = 9.2 3 stages, each 2 x 9.2 Voltage / Frequency in V/Hz: 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz Working width in mm: 400 500 650 Particle size stage 1 in mm: 20 x 155 20 x 155 25 x 160 200 Particle size stage 2 in mm: 5.8 x 50 6 x 40 53 10.5 x 40 76 Particle size stage 3 in mm: 7.5 x 40 80 Security level DIN 32757-1 (DIN A4 70g/m 2 ): 3 3 3 Throughput in kg/h (depending on material): up to 350 up to 800 up to 2500 Dimensions of machine (L x W x H) in mm*: 1421 x 832 x 2500 1900 x 1200 x 3300 1940 x 1430 x 3900 Machine weight in kg: 1150 2500 4000 Technical and design modifications reserved. All technical data and dimensions are approximate values. * Dimensions depend on version supplied for project
HSM ENVIRONMENTAL TECHNOLOGY Germany: HSM Pressen GmbH + Co. KG Bahnhofstrasse 115 88682 Salem Sales: Werk Frickingen Austrasse 1 88699 Frickingen Tel. +49 (0) 75 53 / 822-0 Fax +49 (0) 75 53 / 822-160 info@hsm-online.de International: HSM Pressen GmbH + Co. KG Adresse postale: 1 rue de la Haye Le Dôme - BP 12910 95731 ROISSY CDG CEDEX Adresse salle d'exposition: Paris Nord II 33 rue des Chardonnerets 95971 ROISSY Tel. N Azur 0810.12.26.33 PRIX APPEL LOCAL Fax N Indigo 0820.20.84.80 0,118 EURO TTC / MN HSM.France@hsm-online.de HSM Pressen GmbH + Co. KG Oficina Barcelona Plaça dels Nostres Avis, 3 08450 Llinars del Vallès BARCELONA Tel. +34 93.84.10.760 Fax +34 93.84.10.631 HSM.Spain@hsm-online.de HSM Verkoop Nederland Tel. 0800 0203740 Fax 0800 0203739 HSM.Benelux@hsm-online.de HSM Verkoop België + Luxembourg Tel. +49 (0) 75 53 / 822-354/271 Fax +49 (0) 75 53 / 822-260 HSM.Benelux@hsm-online.de HSM Sales Austria Tel. +49 (0) 75 53 / 822-222 Fax +49 (0) 75 53 / 822-272 HSM.Austria@hsm-online.de www.hsm-online.de HSM of America LLC 1075 Andrew Drive, Suite C West Chester PA 19380 Tel. (610) 918-4894 (800) 613-2110 Fax (610) 918-4899 customerservice@hsmofamerica.com info@hsmofamerica.com www.hsmofamerica.com HSM (UK) Ltd. 14 Attwood Road / Zone 1 Burntwood Business Park Burntwood Staffordshire WS7 3GJ Tel. +44 (0) 1543.272.480 Fax +44 (0) 1543.272.080 info@hsmuk.co.uk www.hsmuk.co.uk Liebel 09/2006 - # 52032 Your HSM partner