Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror Polished Fittings Setting Industry Standards MIC 6 Rolled Products Stainless Steel Welded Mesh Seamless Pipe Welded Pipe Brass Seamless Butt Weld Fittings Welded Butt Weld Fittings Yellow Metals Fittings Seamless Butt Weld Fittings Stainless Steel Copper Structural & Decorative Tube Hygienic Tube Sign & Display Materials Seamless Tube Hygienic Tube Glazing Bar Flanges Fittings Rolled Products Nationwide Supply Solutions Welded Pipe Circle Polish Welded Mesh Nationwide Supply Solutions Welded Pipe Circle Aluminium Section... Polish MIC 6 Butt Weld Fittings Bar & ctions Welded Mesh Rolled Products Pipe Seamless Butt Weld Fittings Welded Pipe Welded Butt Weld Fittings Flanges Seamless Tube Mirror Polish Fixtures & Fittings Hygienic Tube Stainless Steel Nationwide Supply Solutions Hygienic Fittings The Perfect Choice Bar & Sections Yellow Metals Welded Mesh Mirror Polish Aluminium Circle Polish Architectural Rolled Products Seamless Pipe Bronze Seamless Butt Weld Fittings Welded Butt Weld Fittings Welded Pipe Flanges Seamless Tube Circle Polish Hygienic Tube Mirror Polish Glazing Bar Structural & Decorative Tube Brass Sign & Display Materials Seamless Tube Hygienic Tube Bar & Sections Butt Weld Fittings Seamless Tube Flanges Hygienic Fittings Fittings Rolled Products Welded Pipe Circle Polish Mirror Polished Bronze MIC 6 Nationwide Supply Solutions Fixtures & Fittings Copper Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror Polished Fittings Setting Industry Standards MIC 6 Rolled Products Stainless Steel Welded Mesh Products Catalogue - Current Section Seamless Pipe Welded Pipe Brass Seamless Butt Weld Fittings Welded Butt Weld Fittings
2 www.blackburnsmetals.com
Blackburns Aluminium... Aluminium is the most plentiful element in the earths crust and with the high proportion of recycling; reserves of the metal are never likely to be depleted. Some of the greatest technical developments over the past century since aluminium became commercially available have centred around, or been enabled by, aluminium. Some of the benefits in using aluminium include high strength to low weight ratio, formability, corrosion resistant, good conductivity of heat and electricity, does not burn, environmentally friendly as it is fully recyclable. BAR & SECTIONS..............................................................4 LADDER RUNG................................................................7 TUBE, SCAFFOLD TUBE.........................................................8 CHANNEL....................................................................9 TEE SECTION................................................................0 EQUAL ANGLE, METRIC ANGLE.................................................0 UNEQUAL ANGLE............................................................. Z SECTION................................................................... MOULDINGS - GUTTER SECTIONS...............................................2 MOULDINGS - COPE.......................................................... MOULDINGS - FLUTED EDGINGS & NOSINGS.....................................4 MOULDINGS SECTIONS - DFE, HRM............................................. WALLBOARD SECTIONS........................................................6 MISCELLANEOUS SECTIONS....................................................8 HANGING Z SECTION, CARAVAN AWNING.......................................9 SHEET - ALLOYS: 00, 08....................................................20 SHEET - OTHER ALLOYS, WHITE PAINTED, PRE-ANODISED..........................2 PATTERNED SHEET............................................................22 SHATE & PLATE...............................................................2 CUT PLATE...................................................................24 ALUMINIUM CIRCLES - QUARTER HARD CIRCLES, SOFT CIRCLES.....................26 COIL PROCESSING............................................................28 ANODISED COIL..............................................................29 Contact your local Blackburns today... (see back cover for location and contact details) ALUMINIUM - Innovation... Quality... Service...
Round Bar ALLOYS: 6082-T6 20-T/T6, 6262-T9 Dia 4 0.09 6 0. 8 0.9 7 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0.77 20mm 0.8 6 0.9 7 8.0.7 8.74 4 2. 6 2.7 8 2.60 mm 2.6 7 6 2.84 2.09 8.6 4 4.2 7 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8 7.7 2 2 8.8 Dia 2 8 9.46 2 4 0.4 2.4 4 4. 2 6.8 4 9. 4 22.0 4 4 24.8 4 2 27.8 4 4.0 4. 4 7.8 2 4. 4 4.4 6 49.4 6 2 8.0 7 67. 7 4 72.2 7 2 77.2 8 87.9 8 2 99.2 9 9 2 24 0 7 2 98 22 4 269 09 6 2 4 www.blackburnsmetals.com
8 x 8 0.08 8 x 4 0.6 2 x 6 0.06 2 x 8 0. 2 x 6 0.6 2 x 4 0.22 2 x 8 0. 8 x 8 0.4 8 x 6 0.20 8 x 4 0.27 8 x 8 0.4 8 x 2 0. 4 x 6 0.08 4 x 8 0.6 4 x 6 0.2 4 x 4 0. 4 x 8 0.49 4 x 2 0.66 4 x 8 0.82 7 8 x 8 0.9 x 6 0. x 8 0.22 x 6 0. x 4 0.44 x 6 0.4 x 8 0.66 x 2 0.87 x 8.09 x 4. 4 x 8 0.27 4 x 6 0.4 4 x 4 0. 4 x 8 0.82 4 x 2.09 4 x 8.7 4 x 4.64 4 x 2.9 2 x 6 0.6 2 x 8 0. 2 x 6 0.49 2 x 4 0.66 2 x 8 0.98 2 x 2. 2 x 8.64 2 x 4.97 2 x 2.62 2 x 4.28 4 x 8 0.8 4 x 4 0.76 4 x 8. 4 x 2. 4 x 4 2.29 4 x.06 4 x 4.82 2 x 8 0.44 2 x 6 0.66 2 x 4 0.87 2 x 8. 2 x 2.7 2 x 8 2.9 2 x 4 2.62 2 x.0 2 x 4 4.7 2 x 2.2 2 2 x 8 0. 2 2 x 6 0.82 2 2 x 4.09 2 2 x 8.64 2 2 x 2 2.9 2 2 x 4.28 2 2 x 4.7 2 2 x 2 6.6 2 2 x 2 8.74 x 8 0.66 x 6 0.98 x 4. x 8.97 x 2 2.62 x 8.28 x.2 x 2 0.0 2 x 4.2 2 x 2.04 continued on next page... Flat Bar ALLOYS: 6082-T6 606-T6, 606A-T6 Aluminium - EXTRUSIONS
Flat Bar (continued...) ALLOYS: 6082-T6 606-T6, 606A-T6 Square Bar ALLOY: 6082-T6 4 x 8 0.87 4 x 6.0 4 x 4.7 4 x 8 2.62 4 x 2.0 4 x 8 4.7 4 x 4.2 4 x 6.99 4 x 4 8.74 4 0. 6 0.7 8 0.2 2 0.44 8 0.68 4 0.98 7 8.4.7 4 x 2 4.00 x 4 2.9 x 2 4.7 6 x 8. 6 x 4 2.62 6 x 8.9 6 x 2.2 6 x 0.0 4 2.7 2.9 4. 2 6.99 2 2 0.90.70 2 2.40 4 28.00 6 www.blackburnsmetals.com
2 x 2 x 6 swg 0.20 4 x 4 x 6 swg 0. 4 x 4 x 0 swg 0.6 x x 6 swg 0.42 x x 0 swg 0.78 4 x 4 x 6 swg 0. 4 x 4 x 0 swg.00 2 x 2 x 6 swg 0.64 2 x 2 x 0 swg.2 x 2 x 6 swg 0. 2 x 4 x 6 swg 0.48 2 x x 6 swg 0.2 2 x x 0 swg.00 2 x x 0 swg.22 2 x 2 x 0 swg.4 x x 0 swg.67 x 2 x 0 swg.90 4 x 4 x 0 swg.4 2 x 2 x 6 swg 0.87 2 x 2 x 0 swg.68 2 x 2 x 4 swg.06 2 2 x 2 2 x 0 swg 2.2 x x 0 swg 2.7 4 x 4 x 0 swg.47 4 x 4 x 4 swg 6.6 x 4 x 0 swg 2.0 x 2 x 0 swg 2. 4 x x 0 swg 2.2 4 x 4 x 0 swg 2.4 4 x 2 x 0 swg 2.6 6 x 2 x 0 swg.40 6 x x 8 swg 0.80 0 x 0 x.0. x 0 swg 0.9 Box Section SQUARE ALLOYS: 606-T6, 6082-T6 Box Section RECTANGULAR ALLOYS: 606-T6, 6082-T6 Metric Box Section ALLOY: 606 Ladder Rung ALLOY: 6082-T6 Aluminium - EXTRUSIONS 7
Tube ALLOYS: 6082-T6 606-T6, 606A-T6 8 o/d x 6 swg 0. 2 o/d x 8 swg 0.2 2 o/d x 6 swg 0. 2 o/d x 0 swg 0.26 8 o/d x 8 swg 0. 8 o/d x 6 swg 0.20 8 o/d x 0 swg 0. 4 o/d x 8 swg 0.9 4 o/d x 6 swg 0.24 4 o/d x 0 swg 0.44 7 8 o/d x 8 swg 0.22 7 8 o/d x 6 swg 0.29 7 8 o/d x 0 swg 0. o/d x 8 swg 0.2 o/d x 6 swg 0. o/d x 0 swg 0.6 o/d x 6 0.8 8 o/d x 8 swg 0.28 8 o/d x 6 swg 0.7 8 o/d x 0 swg 0.70 4 o/d x 8 swg 0.2 4 o/d x 6 swg 0.42 4 o/d x 2 swg 0.6 4 o/d x 0 swg 0.79 4 o/d x 6.08 8 o/d x 6 swg 0.46 8 o/d x 0 swg 0.88 2 o/d x 8 swg 0.8 2 o/d x 6 swg 0.0 2 o/d x 0 swg 0.96 2 o/d x 6. 2 o/d x 4.7 8 o/d x 6 swg 0. 8 o/d x 0 swg.0 8 o/d x 6.48 4 o/d x 6 swg 0.9 4 o/d x 0 swg.4 7 8 o/d x 0 swg.2 2 o/d x 6 swg 0.68 2 o/d x 4 swg 0.84 2 o/d x 0 swg.2 2 o/d x 6.86 2 o/d x 4 2.9 2 4 o/d x 6 swg 0.77 2 4 o/d x 0 swg.49 2 2 o/d x 6 swg 0.86 2 2 o/d x 0 swg.67 2 2 o/d x 6 2.8 2 2 o/d x 4.08 2 2 o/d x 8 4.6 2 4 o/d x 0 swg.84 o/d x 6 swg.0 o/d x 2 swg.6 o/d x 0 swg 2.02 o/d x 6 2.90 o/d x 4.76 2 o/d x 6 swg.2 2 o/d x 0 swg 2.7 2 o/d x 4 4.46 4 o/d x 6 swg.8 4 o/d x 2 swg 2.2 4 o/d x 0 swg 2.72 4 o/d x 4. 4 2 o/d x 0 swg.07 4 2 o/d x 4.8 o/d x 0 swg.4 o/d x 4 6.2 2 o/d x 4 7.2 6 o/d x 0 swg 4. 6 o/d x 4 7.90 6 2 o/d x 4 8.8 Scaffold Tube 20FT LENGTH 29 2 o/d x 7 swg. 8 www.blackburnsmetals.com
8 x 8 x 6 0. 2 x 2 x 6 0.06 2 x 2 x 8 0.27 8 x 8 x 6 0.9 8 x 8 x 8 0.6 4 x 2 x 8 0.44 4 x 4 x 6 0.24 4 x 4 x 8 0.49 7 8 x 7 8 x 8 0.2 x 2 x 8 0.8 x 4 x 8 0.49 x x 6 0. x x 8 0.60 x x 6 0.86 8 x 4 x 8 0.2 8 x x 8 0.6 8 x 8 x 8 0.68 4 x 2 x 8 0.44 4 x 4 x 8 0. 4 x x 8 0.66 4 x 4 x 6 0.9 4 x 4 x 8 0.76 4 x 4 x 6.0 2 x 2 x 8 0.49 2 x 4 x 8 0.60 2 x x 8 0.7 2 x 2 x 8 0.9 2 x 2 x 4.74 4 x x 8 0.76 4 x 4 x 8.09 4 x 4 x 4 2.07 2 x 2 x 8 0.60 2 x 4 x 8 0.7 2 x x 8 0.82 2 x x 6.22 2 x x 4.2 2 x 2 x 8.0 2 x 2 x 4.97 2 x 2 x 8.26 2 x 2 x 6.8 2 x 2 x 4 2.40 2 4 x 4 x 6.4 2 2 x x 8 0.9 2 2 x 4 x 6.2 x x 8.04 x 2 x 8.26 x 2 x 6.84 x 2 x 4 x 6 2.66 x 2 x 8.48 x 2 x 6 2.7 x 2 x 4 2.84 2 x 2 x 4 x 6 2.90 4 x 2 x 8.69 4 x 2 x 6 2.0 4 x 2 x 4 x 6.66 x 2 x 4 x 6 4.24 6 x 2 x 4 x 6 4. 6 x x 4 x 8 6.2 6 x x 8 x 2 8.49 8 x x 8 x 2 9.80 0 x x 8 x 2. Channel ALLOYS: 6082-T6 606-T6, 606A-T6 Dimensions are in the order: base x leg x base thickness x leg thickness Aluminium - EXTRUSIONS 9
Tee Section ALLOYS: 6082-T6 606A-T6 2 x 2 x 6 0.0 4 x 4 x 0.08 0.20 4 x 4 x 8 0.0 x x 6 0.2 x x 8 0.4 4 x 4 x 8 0.2 2 x 2 x 8 0.6 2 x 2 x 6 0.92 2 x 2 x 4.20 2 x x 8 0.6 2 x 2 x 8 0.8 2 x 2 x 6.2 2 x 2 x 4.64 x x 4 2. x x 8.69 Dimensions: cross piece x height x thickness Equal Angle ALLOYS: 6082-T6 606-T6, 606A-T6 Metric Angle ALLOY: 606 8 x 8 x 6 0.08 2 x 2 x 6 0.0 2 x 2 x 8 0.9 8 x 8 x 6 0. 8 x 8 x 8 0.2 4 x 4 x 6 0.6 4 x 4 x 8 0.0 7 8 x 7 8 x 8 0.6 x x 6 0.2 x x 8 0.4 x x 6 0.9 x x 4 0.76 8 x 8 x 8 0.46 4 x 4 x 6 0.27 4 x 4 x 8 0.2 4 x 4 x 6 0.76 4 x 4 x 4 0.98 2 x 2 x 6 0.2 2 x 2 x 8 0.6 2 x 2 x 6 0.92 2 x 2 x 0.9 0 x 0 x 0.79 0 x 2 x 0.9 2 x 2 x 4.20 4 x 4 x 8 0.74 4 x 4 x 6.09 4 x 4 x 4.42 2 x 2 x 6 0.4 2 x 2 x 8 0.8 2 x 2 x 6.2 2 x 2 x 4.64 2 x 2 x 8 2.8 2 2 x 2 2 x 8.06 2 2 x 2 2 x 6.8 2 2 x 2 2 x 4 2.08 2 2 x 2 2 x 8.0 x x 8.28 x x 6.9 x x 4 2. x x 8.69 4 x 4 x 4.9 4 x 4 x 8.00 6 x 6 x 2 0.00 0 www.blackburnsmetals.com
Ref. No.92 8 x 4 x 8 0.2 No.940 4 x x 8 0.82 No.94 4 x x 8 0.67 No.942 x 4 x 2 0.9 No.94 4 x 2 x 6 0.8 Z Section ALLOY: 606-T6 Dimensions: height x legs x thickness 4 x 4 x 6 0.0 4 x 8 x 6 0.2 4 x 2 x 6 0. 4 x 2 x 8 0.2 x 2 x 6 0. x 2 x 8 0.0 x 8 x 8 0. x 4 x 6 0.8 x 4 x 8 0.6 4 x 2 x 8 0.6 4 x 4 x 8 0.4 4 x x 8 0.47 2 x 2 x 8 0.4 2 x 4 x 8 0.46 2 x x 6 0.27 2 x x 8 0.2 4 x 4 x 8 0.2 4 x 7 8 x 8 0. 4 x x 8 0.7 2 x 2 x 8 0.2 2 x 4 x 8 0.7 2 x x 8 0.6 2 x x 6 0.92 2 x x 4.20 2 x 2 x 8 0.74 2 x 2 x 6.09 2 x 2 x 4.42 2 2 x x 8 0.7 2 2 x 2 x 8 0.8 2 2 x 2 x 6.2 2 2 x 2 x 4.64 2 2 x 2 x 4.86 x x 8 0.8 x x 4.64 x 2 x 8 0.96 x 2 x 6.40 x 2 x 4.86 x 2 x 8.07 x 2 x 6.8 x 2 x 4 2.08 4 x x 8.06 4 x 2 x 8.29 4 x 2 x 4 2. 4 x x 4 2.9 x 2 x 4 2.92 6 x x 8.6 Unequal Angle ALLOYS: 6082-T6 606-T6, 606A-T6 Aluminium - EXTRUSIONS
Mouldings GUTTER SECTIONS 8 22 0. kg/m 0.29 kg/m 4 466 0.27 kg/m 0.29 kg/m 82 0.20 kg/m 2 www.blackburnsmetals.com
Mouldings COPE 84 06 0.27 kg/m 0.29 kg/m 760 767 0.228 kg/m 0.48 kg/m 794 809 0.42 kg/m 0.02 kg/m 90 90 906 0.089 kg/m 0.28 kg/m 0.22 kg/m Aluminium - EXTRUSIONS
Mouldings FLUTED EDGINGS & NOSINGS 6 249 0.67 kg/m 0.27 kg/m 27 0.247 kg/m 67 0.4 kg/m 748 0.49 kg/m 786 0.68 kg/m 4 www.blackburnsmetals.com
Mouldings Half Round HALF ROUND SECTIONS 8 x 6 0.28 4 x 6 0.46 x 6 0. 4 x 6 0.20 2 x 6 0.20 2 x 4 0.44 Double Feather Edge Mouldings DOUBLE FEATHERED SECTIONS x 8 0.207 4 x 8 0.262 2 x 8 0.8 Mouldings CORNER SECTIONS 900 0.48 kg/m Mouldings LAP PLATE SECTIONS 70 92 0.207 kg/m 0.27 kg/m Aluminium - EXTRUSIONS
Wallboard Sections FOR /8 BOARD 8 8 Continual Run End Stop Wallboard Sections FOR /6 BOARD 6 Continual Run 6 End Stop Wallboard Sections FOR /4 BOARD 4 4 Continual Run End Stop 6 www.blackburnsmetals.com
Wallboard Sections FOR /2 BOARD 2 2 Continual Run End Stop 2 2 External Corner Internal Corner Wallboard Sections FOR /4 BOARD 42 9 4 4 Continual Run End Stop Wallboard Sections FOR BOARD 4 44 Continual Run End Stop Aluminium - EXTRUSIONS 7
Miscellaneous Sections 7 74 806 0.90 kg/m 0.20 kg/m 0.8 kg/m 807 8 87 0.06 kg/m 0.27 kg/m 0.67 kg/m 924 926 927 0.79 kg/m 0.94 kg/m 0.06 kg/m 8 www.blackburnsmetals.com
Miscellaneous Sections 928 929 92 972 0.40 kg/m 0.68 kg/m 0.76 kg/m 0.27 kg/m 96 GM204 0.298 kg/m Hanging Z Section Caravan Awning Aluminium - EXTRUSIONS 9
Sheet ALLOY: 00A-H4 Sheet ALLOY: 08 per sheet (Kg) 2000 x 000 x 0. 2.7 200 x 20 x 0. 4.2 2000 x 000 x 0.6.2 200 x 20 x 0.6.08 2000 x 000 x 0.8 4.4 200 x 20 x 0.8 6.78 2000 x 000 x.0.42 200 x 20 x.0 8.47 000 x 20 x.0 0.20 2000 x 000 x.2 6.0 200 x 20 x.2 0.20 000 x 20 x.2 2.20 000 x 00 x.2 4.60 2000 x 000 x. 8. 200 x 20 x. 2.70 000 x 20 x..20 000 x 00 x. 8.0 2000 x 000 x 2.0 0.80 200 x 20 x 2.0 6.90 per sheet (Kg) 200 x 20 x. 2.7 200 x 20 x 2.0 6.9 200 x 20 x.0 2.4 per sheet (Kg) 000 x 000 x 2.0 6.0 000 x 20 x 2.0 20.0 000 x 00 x 2.0 24.40 4000 x 000 x 2.0 2.7 4000 x 20 x 2.0 27.7 4000 x 00 x 2.0 2.60 4000 x 2000 x 2.0 4.79 2000 x 000 x 2..60 200 x 20 x 2. 2.20 000 x 00 x 2. 0.0 2000 x 000 x.0 6.0 200 x 20 x.0 2.40 000 x 000 x.0 24.40 000 x 20 x.0 0.0 000 x 00 x.0 6.60 4000 x 000 x.0 2. 4000 x 20 x.0 40.66 4000 x 00 x.0 48.80 4000 x 2000 x.0 6.00 20 www.blackburnsmetals.com
Alloys > 2-H22 0-H4 40-H2 6082-T6 2000 x 000 x.0 200 x 20 x.0 2000 x 000 x.2 200 x 20 x.2 000 x 00 x.2 2000 x 000 x. 200 x 20 x. 000 x 00 x. 2000 x 000 x 2.0 200 x 20 x 2.0 000 x 20 x 2.0 000 x 00 x 2.0 2000 x 000 x 2. 200 x 20 x 2. 248 x 29 x 2.8 2000 x 000 x.0 200 x 20 x.0 000 x 20 x.0 000 x 00 x.0 Sheet OTHER ALLOYS per sheet (Kg) 200 x 20 x 0.7.9 200 x 20 x 0.9 7.6 200 x 20 x.0 8. 000 x 00 x.0 2. per sheet (Kg) 200 x 20 x.2 0.2 200 x 20 x. 2.8 000 x 00 x. 8. 200 x 20 x.8.6 per sheet (Kg) 200 x 20 x. 2.7 200 x 20 x 2.0 6.9 200 x 20 x.0 2.4 Sheet White Painted 0-H46 / 00-H4 FULL WHITE GLOSS CLEAR WASH COAT LACQUER REVERSE 0 MICRON POLYCOATED Pre-Anodised Sheet Aluminium - ROLLED PRODUCTS 2
Patterned Sheet Five Bar Treadplate ALLOY: 74-H per sheet (Kg) 200 x 20 x.. 2000 x 000 x 2. 200 x 20 x 2 8.7 000 x 00 x 2 26.8 2000 x 000 x 7. 200 x 20 x 27.0 000 x 00 x 8.9 per sheet (Kg) 2000 x 000 x 4. 2.0 200 x 20 x 4. 9. 000 x 00 x 4. 6. 2000 x 000 x 6 4.0 200 x 20 x 6.7 000 x 00 x 6 74. 200 x 20 x 9. 84. Stucco ALLOY: 00-H4 per sheet (Kg) 2000 x 000 x 0. 2.74 200 x 20 x 0. 4.28 2000 x 000 x 0.6.28 200 x 20 x 0.6.4 2000 x 000 x 0.7.84 per sheet (Kg) 200 x 20 x 0.7.99 2000 x 000 x 0.8 4.8 200 x 20 x 0.8 6.84 200 x 20 x.0 8.0 200 x 20 x.2 0.00 Propeller* ALLOY: 00 per sheet (Kg) 200 x 20 x. 4.0 200 x 20 x 2.0 8.0 200 x 20 x.0 28.0 * Propeller pattern also available up to 6mm thick Contact your local Blackburns today... (see back cover for location and contact details) 22 www.blackburnsmetals.com
per sheet (Kg) 2000 x 000 x 4.0 2.8 200 x 20 x 4.0.9 000 x 00 x 4.0 49.0 2000 x 000 x.0 27. 000 x 00 x.0 6.2 per sheet (Kg) 200 x 20 x 4.0.9 200 x 20 x.0 42. 200 x 20 x 6.0 0.8 200 x 20 x 8.0 67.8 200 x 20 x 0.0 84. 200 x 20 x 2.0 02. per sheet (Kg) 200 x 20 x 4.0.9 2000 x 000 x.0 27. 200 x 20 x.0 42. 000 x 00 x.0 6.2 2000 x 000 x 6.0 2. 200 x 20 x 6.0 0.8 per sheet (Kg) 200 x 20 x.0 42. 2000 x 000 x 6.0 2.7 200 x 20 x 6.0 0.8 000 x 00 x 6.0 7.2 per sheet (Kg) 200 x 20 x 4.0.9 200 x 20 x.0 42. 200 x 20 x 6.0 0.8 200 x 20 x 8.0 67.4 200 x 20 x 0.0 84. 200 x 20 x 2.0 02. 200 x 20 x.0 26.4 200 x 20 x 20.0 68. 200 x 20 x 2.0 20.7 Shate & Plate ALLOY: 6082 Shate ALLOY: 00 Shate ALLOY: 2 Shate & Plate ALLOY: 08 Aluminium - ROLLED PRODUCTS 2
Plate 4000 x 2000mm 000 x 00mm 200 x 20mm Plate can also be cut to customer requirements 6082 08 MIC ALUMEC ALUMEC mm T6 0 6 79 89.0 4.0.0 6.0 6. 8.0 9. 0.0 2.0 2.7.0.88 6.0 9.0 20.0 22.22 2.0 2.4 0.0.7.0 8. 40.0 44.4 0.0 0.8 7. 60.0 6082 08 MIC ALUMEC ALUMEC mm T6 0 6 79 89 6. 69.8 70.0 76.2 80.0 82. 88.9 90.0 00.0 0.6 4. 20.0 27.0 0.0 0.0 2.4 60.0 70.0 77.8 200.0 20.2 228.6 20.0 24.0 04.0 0.0 400.0 24 www.blackburnsmetals.com
6082 08 MIC 204 mm T6 0 6.0 4.0.0 6.0 6. 8.0 9. 0.0 2.0 2.7.0.88 6.0 9.0 20.0 22.2 2.0 2.4 0.0.7.0 8. 6082 08 MIC 204 mm T6 0 6 40.0 44.4 0.8 7. 60.0 6. 69.8 76.2 82. 88.9 0.6 4. 27.0 9.7 2.4 6. 77.8 200.0 20.2 228.6 24.0 0.0 Plate ALLOYS: 6082 ROLLED 08 MIC 6 204 PLATE Plate can also be cut to customer requirements Aluminium - ROLLED PRODUCTS 2
Quarter Hard Circles 200-H2 Diameter Thickness each (Kg) 2mm 0.9mm 0.00 mm 0.9mm 0.046 80mm 0.9mm 0.062 90mm 0.9mm 0.069 2mm 0.9mm 0.089 220mm 0.9mm 0.09 22mm 0.9mm 0.097 20mm 0.9mm 0.96 4mm 0.9mm 0.228 240mm.2mm 0.47 00mm.2mm 0.20 0mm.2mm 0.28 20mm.2mm 0.262 0mm.2mm 0.278 6mm.2mm 0.40 80mm.2mm 0.69 470mm.2mm 0.6 620mm.2mm 0.98 Soft Circles 200-0 Diameter Thickness each (Kg) 80mm.2mm 0.08 20mm.2mm 0.07 240mm.2mm 0.47 20mm.2mm 0.60 270mm.2mm 0.86 280mm.2mm 0.200 00mm.2mm 0.20 0mm.2mm 0.28 0mm.2mm 0.278 60mm.2mm 0. 80mm.2mm 0.69 90mm.2mm 0.89 400mm.2mm 0.409 40mm.2mm 0.49 420mm.2mm 0.4 490mm.2mm 0.64 0mm.2mm 0.77 70mm.2mm 0.80 600mm.2mm 0.920 620mm.2mm 0.98 26 www.blackburnsmetals.com
Diameter Thickness each (Kg) 20mm.6mm 0.0 240mm.6mm 0.96 260mm.6mm 0.20 26mm.6mm 0.29 29mm.6mm 0.297 0mm.6mm 0.7 0mm.6mm 0.7 7mm.6mm 0.479 90mm.6mm 0.8 40mm.6mm 0.60 4mm.6mm.02 60mm.6mm.268 60mm.6mm.440 680mm.6mm.76 00mm 2.0mm 0.8 20mm 2.0mm 0.46 40mm 2.0mm 0.492 90mm 2.0mm 0.648 40mm 2.0mm 0.76 440mm 2.0mm 0.82 460mm 2.0mm 0.90 49mm 2.0mm.04 0mm 2.0mm.97 0mm 2.0mm.289 80mm 2.0mm.4 270mm 2.mm 0.88 290mm 2.mm 0.448 0mm 2.mm 0.496 80mm 2.mm 0.769 46mm 2.mm. 60mm 2.mm.670 4mm.0mm 0.76 Soft Circles (continued...) 200-0 Aluminium - ROLLED PRODUCTS 27
Coil Processing Capabilities ALUMINIUM SLIT COIL s range from: Gauge: 0.2mm >.0mm Widths available: 0mm > 20mm Tolerance: ±0.27mm STAINLESS STEEL SLIT COIL s range from: Gauge: 0.4mm > 2.0mm Widths available: 0mm > 20mm Tolerance: ±0.27mm Please enquire for specific gauge and width configurations available ALUMINIUM PRECISION BLANKS s range from: Gauge: 0.2mm > 2.0mm Widths available: 0mm > 000mm Length Min/Max: 0mm > 000m Tolerance Width: ±0.27mm Tolerance Length: ±0.mm STAINLESS STEEL PRECISION BLANKS s range from: Gauge: 0.4mm > 2.0mm Widths available: 0mm > 000mm Length Min/Max: 0mm > 000m Tolerance Width: ±0.27mm Tolerance Length: ±0.mm Polycoating available on all products on request Contact your local Blackburns today, or Coil Processing on 084 282 0 (see back cover for location and contact details) 28 www.blackburnsmetals.com
Thickness 00 200 0 004 00 2 00 82 0.2 0.28 0.0 0.4 0.8 0.40 0.42 0.46 0.48 0.0 0.6 0.60 0.6 0.70 0.80 0.90.00.20.2.40.0.60 2.00 2.0.00 Thickness ART90 ART0 ART80 ART4 ART2 ART20 ART2 ART20 0.40 0.0 Coil MILL FINISH Anodised Coil LIGHTING & ARCHITECTURAL Thickness V900 V98 V94 MILL BGT WHITE STUCCO GOLD 0.0 0. 0.40 0.4 0.0 0.77 0.90 Aluminium - ROLLED PRODUCTS 29
Aluminium, Stainless Steel and non-ferrous alloys... Blackburns is one of Europe s leading suppliers of Aluminium, Stainless Steel and other semi finished non-ferrous products. Its name is synonymous with high quality and service levels throughout industry, with a reputation for innovative products and supply partnerships. Thirteen strategically placed sales and service centres provide immediate stock availability and local service to a wide range of industries and market sectors, with what is probably the most comprehensive product range and processing facilities in the UK. Local stock is enhanced by a central facility which carries over 0,000 tonnes of material in over 200,000 square feet, all of which is available on a daily basis to each of our service centres throughout the UK, ensuring ongoing stock availability. Focused on the requirements of our customers, a significant investment has been made in fabrication and processing facilities allowing us to supply material closer to final form, providing the option of bespoke sizes and finishes previously unavailable, creating a real opportunity for a one stop shop. Blackburns remains responsive to the constant fluctuations in demand faced by its customers, and with the ability to supply to most parts of the UK within 24 hours and through its export department, to Europe, the middle east and beyond. Contact your local Blackburns today... (see back cover for location and contact details) 68 www.blackburnsmetals.com
Blackburns Products & Services ALUMINIUM Sheet Patterned Sheet Plate Coils & Blanks Circles Shate Special Extrusions Angles Tee & Zed Sections Channels Flat Bar Round Bar Square Bar Welding Wire Round Tube Rectangular Tube Gutters & Cope Fluted Edges & Nosings Wallboard Sections STAINLESS STEEL Sheet Treadplate Plate Coil Section Pipe Circle Polished Flanges Seamless Tube Hygienic Tube & Fittings High Purity Tube & Fittings Screwed Fittings Socket Weld Fittings Structural & Decorative Tube BRASS Rod Hexagon Angle Square Tube Plate Flat Bar Sheet BRONZE Drawn Rod Rod Hexagon Hollow Bar Plate Sheet COPPER Tube Flat Bar Sheet Plate Round Bar COIL PROCESSING Aluminium Slit Coil Stainless Steel Slit Coil Aluminium Precision Blanks Stainless Steel Precision Blanks PLATE Aluminium Plate 08 Aluminium Plate 6082 Alumec 79-89-99 MIC-6 ARCHITECTURAL PRODUCTS / SURFACE DESIGN Composite Panels Anodised Sheet Patterned Sheet Handrail System FABRICATION PROCESSING Plastic Coating Guillotining Bench Tooling Bending Slitting Shearing Sawing Tapping & Drilling Blanking Mitring Punching Pressing SIGNS & SIGN COMPONENTS Alochromed & Painted Sheet Aluminium Circles Aluminium Triangles Aluminium Rails Aluminium Tee Sections Aluminium Round Posts Aluminium Square Posts Steel Round Posts Steel Square Posts Plastisol Coated Sheet Planking Systems Trays Clip Sections Composite Panels Stainless Steel Banding Systems MARINE PRODUCTS Marine Aluminium Marine Stainless Steel BCP Composite Yellow metals decpk070 200 BLACKBURNS METALS LTD All copyrights are reserved and no part of this publication may be reproduced, transmitted or stored in any form or by any means without the prior permission of Blackburns Metals Limited. DISCLAIMER The information contained herein is for guidance only. No liability will be accepted by the Company. PRODUCT CATALOGUE
BLACKBURNS METALS LIMITED BEDFORD Edison Road Elms Farm Industrial Estate Bedford MK4 0HU t. 024 684 00 bedford@blackburnsmetals.com BRIDGEND Coegnant Close Brackla Industrial Estate Bridgend Mid Glamorgan CF 2AH t. 066 68 900 bridgend@blackburnsmetals.com BRISTOL St. Andrews Trading Estate Third Way, Avonmouth Bristol BS 9YE t. 07 948 2600 bristol@blackburnsmetals.com EDENBRIDGE Commerce Way Edenbridge Kent TN8 6ED t. 072 82 700 edenbridge@blackburnsmetals.com HAYDOCK Units & 4 Haydock Lane Industrial Estate Haydock Lane, Haydock St. Helens WA 9UY t. 0942 78 800 haydock@blackburnsmetals.com KINGSWINFORD Building, Second Avenue The Pensnett Estate Kingswinford DY6 7UE t. 084 282 60 kingswinford@blackburnsmetals.com LEEDS Units & 4 Benyon Park Leeds LS2 6DP t. 0 86 280 leeds@blackburnsmetals.com NORWICH Concorde Road Norwich Norfolk NR6 6BJ t. 060 24 900 norwich@blackburnsmetals.com PLYMOUTH Unit K, Eagle Road Langage Business Park Plymouth, Devon PL7 JY t. 072 62 400 plymouth@blackburnsmetals.com READING 9-0 Stadium Way, Reading Berkshire RG0 6BX t. 08 94 42 reading@blackburnsmetals.com PLATE / COIL CENTRE Building 4, Third Avenue The Pensnett Estate Kingswinford DY6 7UU t. 084 282 60 (plate) t. 084 282 0 (coil) plate@blackburnsmetals.com coil@blackburnsmetals.com MARKETING AND EXPORT Building 8, Second Avenue The Pensnett Estate Kingswinford DY6 7UN t. 084 276 49 marine@blackburnsmetals.com PRODUCT CATALOGUE Contact your local Blackburns or visit us online: www.blackburnsmetals.com BML0