TRALER JACKS XPD15L 1304 1 1304 1302 1302 1 Wide Track (F2) 7" diameter wide wheel jack 1600 lbs. capacity Wheel rolls independently to make changing direction smooth and effortless. Revolutionary adjustable mount & swivel system. Anodized finish. ncludes hardware for 3 x3 or 3 x4 frame. Twin Track (F2) as above with (2) 7" diameter wheels ECLPSE MARNE SWVEL JACK EJ1000 * * More Hammerblow Swivel Jacks on page 44 * * More Hammerblow Swivel Jacks on page 44 571624Z 571924 571924Z 42
TRALER AND SPECALTY JACKS JACK REPLACEMENT PARTS * 155154 1 Bulldog Sidewind weldon/bolton AFrame Jack 1000 lbs. capacity with removable poly wheel. BULLDOG HEAVY DUTY 7K SQUARE LEG JACKS * 190754 * More Hammerblow A Frame & Square Leg Jacks on pages 44 thru 46 CE111 1 # 6811S 6 Poly Wheel Only Caster Assembly (as above) for 1000 lb. capacity jacks # F2000S 2.1 tall, 2K5K CD555 1 Dual 6 Wheel Caster Assembly (not shown) 017125 1 Steel 6 Wheel Caster Assembly (not shown) 1033304S 018917 018917 # F2000 8 extension, 2K5K 43
TRALER JACKS BULLDOG SDEWND SWVEL, SNAP RNG MOUNT JACK The 151101 Jack comes complete with weldon swivel brackets, snap ring, and steel disc foot. PART NO. LFT LFT BRACKET RETRACTED CAPACTY HEGHT HEGHT 151101 2,000 LBS 10 11.25 17.5 BULLDOG TOPWND SWVEL, SNAP RNG MOUNT JACKS These Swivel, Snap Ring Mount Jacks come complete with a weldon swivel bracket and snap ring. The lock pin secures jack in up or down position. Steel disc foot on bottom of jacks. PART NO. LFT LFT BRACKET RETRACTED CAPACTY HEGHT HEGHT 1501 2,000 LBS 10 11.25 18.5 1521 2,000 LBS 15.5 27.75 1701 5,000 LBS 10 11.25 18.5 1712 5,000 LBS 15.5 27.75 BULLDOG TOPWND AFRAME JACKS For bolton or weldon applications. These Jacks are used with AFrame couplers. 155200 comes complete with a polywheel. 155300 comes complete with a steel wheel.. PART NO. LFT LFT BRACKET RETRACTED CAPACTY HEGHT HEGHT 175022 5,000 LBS 15 1 30.00 155022 2,000 LBS 15 1 30.00 155200 1,000 LBS 15 1 32.25 155300 1,000 LBS 15 1 32.25 195362 BULLDOG SDEWND SWVEL, PPE MOUNT JACKS For industrial and agricultural applications, these Jacks come complete with mounting brackets. Pipe swivel mounting gives superior side load stability for the most demanding situations. Available in capacities ranging from 2,000 up to 7,000 lbs. Steel disc foot on bottom of jacks. PART NO. LFT LFT BRACKET RETRACTED CAPACTY HEGHT HEGHT 158109 2,000 LBS 10 11.25 17 158151 2,000 LBS 15.5 26.5 178201 5,000 LBS 10 10 17.5 178203 5,000 LBS 15 15 21.75 195362* 5,000 LBS 15 15.1 22.1 198150 7,000 LBS 10 10 17 198250 7,000 LBS 15 15 2 *Square Leg Jack with Square Collar, Manual Swivel BULLDOG TOPWND SWVEL, PPE MOUNT JACKS For industrial and agricultural applications, these Jacks come complete with mounting bracket and steel disc foot. Pipe swivel mounting gives superior side load stability for the most demanding situations. PART NO. LFT LFT BRACKET RETRACTED CAPACTY HEGHT HEGHT 158451 2,000 LBS 10 11.25 18 158452 2,000 LBS 15.5 27.75 178101 5,000 LBS 10 11.25 18.5 178151 5,000 LBS 15.5 27.75 198100 7,000 LBS 10 10 18.5 198200 7,000 LBS 15 15 20 44
TRALER JACKS NDUSTRAL AND AGRCULTURAL JACKS Rolled acme threads and steel antifriction thrust bearings, provides smooth cranking and long cycle life Large diameter tubing with ample tube overlap for safe, strong service for years Painted outer tube and zinc plated inner tube provide corrosion resistant finish Tubular (G) mount features a 5/8 diameter pin. Snapring (Smount) mount features a 3/8 diameter pin Available in 10 and 15 travel/extension Heavy gauge zinc plated steel foot provides a large, strong base for lifting heavy loads on soft ground Made in USA Jacks may be purchased complete with mounting hardware installed. 1501 151101 158451 158109 1521 158486 158151 178112 AFRAME / JA & DROPTHRU JACKS Rolled acme threads and antifriction thrust bearings provide smooth cranking and long cycle life. High strength tubing and ample tube overlap delivers safe, strong service for years. Sidewind jacks feature 1:1 sidewind gear ratio providing more travel with less cranking to lift or lower the jack. Topwind handle design provides easier cranking by utilizing your arms most efficient muscles. Sidewind jacks feature the molded, vinyl gear cover cap that fits securely, but can be removed for jack lubrication and service will not rust. Painted inner and outer jack tubes. Made in U.S.A. # 1624S01 Top Wind Replacement Handle Part No. 1000 LB. JA104T JA104S 2000 LB. 155010 5000 LBS. JP5T 571924Z Description AFrame jack AFrame Jack AFrame Jack Dropthru jack AFrame Jack Travel Handle Type Top wind Side wind Side wind Top Wind Top wind Caster CE111 CE111 CE555 CE555 CE555 Support Foot* AFrame Plate* F1000 F1000 F2000 F5000 F5000 SPA50 Bottom Support Plate* SPB 10 SPB 10 SPB 50 SPB 50 SPB 50 Overall Length Retracted (A) 20.0 22.0 21.0 19 19 Travel (B) AFrame Plate Attachment 6.00 6.00 7.00 9.00 45
TRALER JACKS RACK POSTS AND GEAR BOXES Hammerblow's everpopular RackJacks are available in many mounting and foot options. Choose the gear boxes and rack post best suited for your particular needs. PART NO. DESCRPTON 161100 750Lb. cap rackpost and disc foot, 23 3/4 tall, with an L shaped weldon gearbox 161200 560Lb. cap rackpost and poly wheel, 27 3/4 tall, with an L shaped weldongearbox 161300 750Lb. cap rackpost and steel wheel, 27 3/4 tall, with an L shaped weldon gearbox 162100 750Lb. cap rackpost and disc foot, 23 3/4 tall, with an L shaped bolton gearbox 162200 560Lb. cap rackpost and poly wheel, 27 3/4 tall, with an L shaped bolton gearbox 162300 750Lb. cap rackpost and steel wheel, 27 3/4 tall, with an L shaped bolton gearbox 165111 750Lb. cap rackpost and disc foot, 23 3/4 tall, with an A frame gearbox 165211 560Lb. cap rackpost and poly wheel, 27 3/4 tall, with an A frame gearbox 165311 750Lb. cap rackpost and steel wheel, 27 3/4 tall, with an A frame gearbox BULLDOG DROP LEG JACKS 190 SERES: The convenience of a dropleg when a fullsize dropleg jack would be too large. This midsize jack features 2 1/ square outer tubing and plated inner leg and drop leg section. Available in Topwind (190500) or Sidewind (190510 & 190756, which include welded tube mount) 182 SERES: These full size dropleg jacks feature a 4 square outer tubing and come with a detachable handle. Sidewind available with standard inner dropleg (182450 & 182404) or optional springloaded inner leg for automatic retraction (182800), as well as top wind with standard inner dropleg (182304). 183 SERES: Similar to 182 series, the 183 series are 2 speed jacks. PART NO. STATC LFT LFT DROP LEG RETRACTED LOAD CAPACTY TRAVEL HEGHT 190754 7,000 LBS 5K w/tube mount 15 13 1/ 25.6 190704 8,000 LBS 7,000 15 13 1/ 22.6 190756 8,000 LBS 7K w/tube mount 15 13 1/ 25.5 183416 10,000 LBS 2 Speed 12 1/ 13 1/ 27.5 183816 10,000 LBS 2 Speed w/spring return 12 1/ 13 1/ 27.5 182304 12,000 LBS 10,000 12 1/ 13 1/ 22.5 182404 12,000 LBS 10,000 12 1/ 13 1/ 27.5 182450 12,000 LBS 10,000 12 1/ 13 1/ 31.6 182800 12,000 LBS 10,000 12 1/ 13 1/ 27 015181 Side Wind Replacement Handle 800075 Top Wind Replacement Handle BUYERS DROP LEG JACKS (MPORTED) 21/ SQUARE PART NO. STATC WND LFT TRAVEL RETRACTED LOAD HEGHT 0091340 7,000 LBS Side Wind 16 26 25.75 0091310 7,000 LBS Top Wind 16 26 22.35 BUYERS POWER JACK 12 Volt DC powered with manual crank override 3,500 lbs lifting capacity Full 18" stroke: (12" Power + 6" manual drop leg extension) Quick 30 second stroke time Over sized, 5" diameter foot pad prevents divots plated foot is adjustable Builtin leveling gauge Dual night lights Weather sealed switch 26" overall height PART NO. DESCRPTON 0093500 3500 lb., Heavy Duty 5,000 lbs breakaway capacity ATWOOD POWER JACKS Atwood Power Jacks make positioning a trailer hasslefree. Our Low Cost Power Jack lifts 1,500 lbs. and also has a manual override. HD 1 7/8" tubing on the Low Cost Power Jack and 2 1/4" tubing on the Deluxe Power Jack, and sturdy footpads provide for greater trailer stability. The rugged 12 V DC electric gear motor easily lifts heavy loads and is proven in years of RV use under adverse conditions. PART NO. DESCRPTON A B RETRACTED EXTENDED 80236 1500 lb., Light Duty 10 1/8.75 24 7/8 39.25 80511 2500 lb., Standard Duty 10 1/8.75 24 7/8 39.25 80515 2500 lb., Deluxe Power Jack 10 1/8.75 24 7/8 39.25 80530 3500 lb., Heavy Duty 10 1/8.75 24 7/8 39.25 46
TRALER COUPLERS FASLOK STRAGHT TONGUE COUPLERS PART NOS. 11200, 11250, 11300, 22200, 22250, 22300 For and ball sizes, Class and Class trailers Available for, 2 1/ and 3 tongue widths Available in bulk pack, prime painted, zinc plated, oily assembled or unassembled and individually boxed. 11series for ball couplers and 22series for FASLOK, CLASS, COUPLER PART NO. 34300 Straight tongue class FASLOK Coupler Available for 3 tongue widths & ball Available assembled prime painted FASLOK, CLASS, AFRAME COUPLER PART NO. 33305 5000 lb. trailer G.V.W. rating Standard 50º Aframe and jack mounting holes Serviceable ball clamp assembly for field replacement Available assembled with prime painted finish CLASS V 2 5/16 AFRAME COUPLER PART NO. 44305 SAE 10,000 LB. G.V.W. rating Ductile iron ball clamp Stainless steel spring and pivot pin Easy to use latching mechanism Positive open latch feature Padlock hole provided for trailer security COUPLER SELECTON GUDE MODEL NO. 11200 11200B 11250 11250B 11300 11300B FNSH BALL SZE SAE CLASS TRALER G.V.W. TONGUE MOUNT 2,000 lbs V 2,000 lbs 2,000 lbs. 3.500 lbs. Wide Channel Wide Channel 2 1/Wide Channel 2 1/ Wide Channel 22200 22200B 22250 22250B 22300 22300B Wide Channel Wide Channel 2 1/ Wide Channel 2 1/ Wide Channel 33305 34300 308 44305 Painted Painted Painted Painted 2 5/16 * V 5,000 lbs 5,000 lbs 5,000 lbs. 10,000 lbs. 50º AFrame 2 7/8 Wide Channel 50º AFrame 47
TRALER COUPLERS CLASS & HANDWHEEL COUPLERS PART NOS. 107, 308 The heavy duty handwheel couplers are preferred for rental and utility trailers. Made in U.S.A. #107 for trailer balls #308 for trailer balls COUPLER REPAR KTS KT NO. DESCRPTON BALL DA. 52 Kit for 306, B6, 308, B8 couplers /2 1/8 56 Kit for 107, 108,07 & 08 couplers 58 Kit for 11 and 1 Series FasLok couplers 59 Kit for 22 and 2 Series FasLok couplers 60 Kit for 34300, 33305 couplers 61 Kit for 34308 couplers Note: Valley Repair Kits also available. 2 5/16 GOOSENECK COUPLER PART NO. GN24 24,000 lb. rating 2 5/16 ball Weld easily to 3 4 pipe size Quick and easy locking and unlocking action no need to climb into tow vehicle bed Made in U.S.A. GOOSENECK STYLE 20,000 LB. COUPLER FOR 2 5/16 BALL PART NO. 028760 Adjustable Part # 028760 Overall Height 29 1/2" Adjustment 11" 3/4" Set Screws 4 1/2" O.D. Wall Outer Tube 4" O.D. x 1/4" Wall nner Tube Shipping Weight 50 lbs. Fixed Part # 028750 Overall Height 34" 4 1/2" O.D. x 1/4" Wall Fixed Tube Shipping Weight 39 lbs GOOSENECK COUPLER REPAR KT PART NO. 028150 Coupler Assy. Locking Pin Assy. Locking Pin Cover Bulldog Label Warning Label Shipping Weight 10 lbs. HANDGRP COUPLER HANDLE PART NO. CH0701 ALLOWS FOR EASY TRALER POSTONNG Fits all and couplers Does not include coupler 48
TRALER COUPLERS ATWOOD COUPLERS 80051 STRAGHT TONGUE For 2" Hitch Balls S.A.E. Class 2 for: 3" channel, bolton G.V.W. Part No. 80051 painted 80082 STRAGHT TONGUE For 2" Hitch Balls S.A.E. Class 3 for: 2" channel, weldon 5,000 lbs. G.V.W. Part No. 80082 painted 80131 STRAGHT TONGUE For 2 5/16" Hitch Balls S.A.E. Class 4 for: 3" channel, weldon 8,500 lbs. G.V.W. Part No. 80131 painted 80072 50 0 AFRAME For 2" Hitch Balls S.A.E. Class 3 for: 50 0 AFrame, 5,000 lbs. G.V.W. Part No. 80072 painted 81911 50 0 AFRAME 82680 50 0 AFRAME For 2 5/16" Hitch Balls S.A.E. Class 4 for: 50 0 AFrame, 10,000 lbs. G.V.W. Part No. 81911 painted For 2 5/16" Hitch Balls S.A.E. Class 4 for: 50 0 Underslung AFrame mounting 10,000 lbs. G.V.W. Part No. 82680 painted Primarily used for recreation vehicles BUYERS AFRAME COUPLERS These durable, dropforged Couplers are of heavydesign for horse, boat, travel and industrial trailers. Springloaded locking collars with convenient thumb latch provide positiveaction coupling. PART NO. REF. NO. BALL MOUNT CAPACTY 0091040 028287 2" 50 DEGREE AFRAME 7,000 LB. 0091045 028463 2 5/16" 50 DEGREE AFRAME 12,500 LB. BULLDOG STRAGHT TONGUE COUPLERS These durable, dropforged Couplers are designed for those who place quality and dependability above price. Spring loaded collars provide positive action coupling, heavy gauge metal structure assures longevity. PART NO. REF. NO. BALL TONGUE SZE CAPACTY 2B2 028711 2" 2 1/4".D. ROUND SHANK 5,000 LB 2B4 028721 2" 3" SQUARE 5,000 LB 4B2 028461 2 5/16" 2 1/4" O.D. ROUND SHANK 12,500 LB 4B4 028462 2 5/16" 3" SQUARE 12,500 LB 49