P E R S O N A L R E C O R D S of Pawel Staszewski 22/03/2007 Author or co-author of 87 publications including: 2 thesis, 36 papers in periodicals and reports in conference proceedings, 29 elaborations and 3 expertise s for industry, 11 reviews and 6 patents. I. Philosophy Doctor Thesis (Ph.D.): [Numerical analysis of electromagnetic circuit of tachymetric reluctance generator], Politechnika Warszawska, 1977 II. Doctor Sciences Thesis (D.Sc.): [Application of field methods for calculation and design of chosen constructions of electrical machines], Politechnika Warszawska, 1999 III. Original research publications in periodicals and conference proceedings: 1. [Comparative analysis of axial and radial ventilation systems of induction motors] Biuletyn Informacyjny IEl - Elektrotechnika, Nr 4, 1969, pp. 91-104, (co-author) 2. [Directions and postulates of development of DC machines in Poland], Przegląd Elektrotechniczny Nr 8, 1973, pp. 367-368 3. [Full-scope approximation of magnetization characteristic of ferromagnetics by spline functions], XIII Sympozjum Maszyn Elektrycznych, Kazimierz Dolny, 1977. 4. [Calibrated divider of electric charge for ballistic deflection method], Rozprawy Elektrotechniczne, vol. 25, Nr 2, pp. 519-526, 1979, (co-author) 5. [Numerical method of magnetic field determination in tooth-zone of reluctance generator], V Sympozjum Zjawiska elektromagnetyczne w obwodach nieliniowych - Modele matematyczne, pp. 79-83, Politechnika Poznańska, Kołobrzeg, 04/1978 6. [Numerical method of solution of non-linear magnetic circuit of electrical machine], Rozprawy Elektrotechniczne, vol. 25, Nr 2, pp. 369-384, 1979 7. [New conception of non-stationary reluctivity underrelaxation in iterative calculation of magnetic field distribution], II Krajowa Konferencja Teorii Pola Elektromagn.,Rydzyna - Bydgoszcz, 29/09-1/10/1983, pp. 61-65, (co-author) 8. New approach to the non-stationary reluctivity underrelaxation in the iterative magnetic field calculation, Modelling, Simulation and Control A, vol. 6, Nr 1, pp. 9-14, 1985, (co-author) 9. [Non-stationary reluctivity underrelaxation in iterative calculation of magnetic field distribution In electrical machine], Archiwum Elektrotechniki, vol. XXXIV, Nr 1/2, pp. 361-368, 1985 10. Improvement of effectivenes of numerical field determination in electrical machine by extrapolation, Intern. IMACS Symposium: Modelling and Simulation in Electrical Machines and Converters, Liege, Belgium, pp. 127-130, 17-19 May 1984, (co-author)
11. Efficient technique of magnetic field determination in electrical machine, ICEM 82, Budapest - Hungary, 5-9/IX/1982, Paper GT1/8, pp. 27-30, (co-author) 12. Nouvelles possibilités d accéleration de la convergence des calculs itératifs du champ magnétique dans les machines électriques, Actes du Colloque Internationale MODELEC, La Grande Motte (France - Hérault), 22-24 Octobre 1984, pp. 319-329 13. [Modified algorithm of magnetic field determination in nonlinear nonhomogeneous circuit of electrical machine], Rozprawy Elektrotechniczne, vol. 32, Nr 2, pp. 493-505, 1986 (co-author) 14. Field model of determination of main pole leakage parameters in DC machine, Intern. Conf. on Electrical Machines, ICEM 86, 8-10 Sept. 1986, München Germany 15. [Field model of identification of main pole dissipation parameters in DC machine], Archiwum Elektrotechniki, Nr 3/4, pp. 791-804, 1986 16. [Numerical analysis of electromagnetic circuit of DC machines], Rozprawy Elektrotechniczne, vol. 33, Nr 3/4, pp. 695-710, 1987 17. [Structural model of turbogenerator for numerical field calculation], Przegląd Elektrotechniczny, z. 9, pp. 266-269, 1988 (co-author) 18. Field method of parameters and operation characteristics identification in DC machine, 31 Internationales Wissenschaftliches Kolloquium der Technischen Höchschule ILMENAU/DDR, 27 31/10/1986, Vortragsreihe A3, Heft 1, pp. 273 276 19. Field calculations of performance characteristics of DC machines, Archives of Electrical Engineering, vol. XLIV, Nr 4, pp. 497-512, 1995 20. Field method of performance characteristic shaping of electrical machine by construction modifications, Second Intern. Conf. on Computation in Electromagnetics, IEE London - Nottingham, 12-14 April 1994, pp. 243-246. 21. Spatial analysis of magnetic field in composite motion step motor, International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF 95, Thessaloniki, Greece, 25-27 Sept. 1995 (co-author) - publication accepted for International Conference, but not edited because of financial problems 22. Tooth zone optimisation of electrodynamic separator by field method, International Conference on Electrical Machines, ICEM 96, Vigo - Spain, 10-12 Sept. 1996, reference of paper: 7257 (co-author) - publication accepted for International Conference, but not edited because of financial problems 23. Field model of load characteristics shaping of DC motor by means of construction modifications, Archives of Electrical Engineering, Vol. XLV, Nr 2, pp. 161-173, 1996 24. [Electrodynamic separators], XXX Sympozjum Maszyn Elektrycznych, pp. 191-198, Warszawa - Kazimierz Dolny, 1984 (co-author)
25. Field models of tooth zone optimisation of electrodynamic separator, Archives of Electrical Engineering, Vol. XLV, Nr 4, pp. 415-431, 1996 26. [Magnetic separators], Prace Naukowe Politechniki Warszawskiej - Elektryka, z.2, pp. 5-20, 1998 (co-author) 27. [Switch reluctance motor with non-cylindrical rolling rotor], Zeszyty Naukowe seria Elektryka, Wydawnictwa Politechniki Warszawskiej, z.117, pp.63 86, 2001, (co-author) 28. [Composite motion elektro-mechanical motor], Zeszyty Naukowe seria Elektryka, Wydawnictwa Politechniki Warszawskiej, z.117, pp.31 46, 2001, (co-author) 29. Field analysis of the magnetic circuit of the linear DC motor, Archives of Electrical Engineering, Vol. L, Nr 2, pp. 127-134, 2001, (co-author) 30. Synthesis of electromagnetic circuit of linear DC motor, Archives of Electrical Engineering, Vol. L, Nr 2, pp. 135-143, 2001 31. Differential current sensor new construction, Proceedings of the Sixth European Space Power Conference SP-502 by European Space Agency (ESA), 6 10 May 2002, Porto, Portugal, pp. 229 234 (co-author) 32. Centre of Excellence Ecological and highly efficient systems and equipement for electromechanical energy conversion Project at the Institute of Electrical Machines of Warsaw University of Technology, 6 th Intern. Conf. Modern Electric Traction in Integrated XXIst Century Europe, Warsaw, September 25-27, 2003 (co-author) 33. [Field analysis of magnetic circuit of sliping transformer with amorfic core], XL International Symposium on Electrical Machines Losses and Efficiency in Electrical Machines SME 2004, Hajnówka, Poland, pp. 443 45, 15 18 June 2004 (coauthor) 34. Field model of sliding transformer for contactless electrical energy delivery system, Archives of Electrical Engineering, Vol. LIV, Nr 1, pp. 83-92, 2005, (co-author 35. Leakage Inductance and Flux Density Distribution in Long Magnetic Core of Sliding Transformer, Fifth International Caracas Conference on Devices, Circuits and Systems (ICCDCS 2004), Barcelo Bavaro Convention Center, Punta Cana, Dominican Republic, 3 5 November 2004 (co-author) 36. Sliding transformer with long magnetic circuit for contactless electrical energy delivery to mobile receivers, IEEE Transactions on Industrial Electronics, 2006 Nr 6 pp.1943 48, (co-author) IV. Design, construction and experimental elaborations for industry 1. [Comparison of one- and two-sides ventilation systems of electrical motors], Report of Institute of Electrical Machines(IME)/Warsaw University of Technology (WUT) Nr 20/NB/68, pp. 1-69, Warszawa, 11/1968, (co-author)
2. [Bulletin on current development tendencies of electrical machines in word industry and technical-economical guidelines for development planning of machine s industry in Poland, pt.ii], Report IME/WUT Nr 3/NB/70, pp. 1-62, Warszawa 12/1971, (coauthor) 3. [Vibrations and noises in electrical machines manufactured by EMIT-Zychlin factory and the methods of their limitation], Report IME/WUT Nr 501/017/8, Warszawa 1979-80, (co-author) 4. [Influence of exploitation parameters on operation of chosen constructional elements of TGW-200 turbogenerator, Report IME/WUT Nr 501/004/1, Warszawa 1991, (coauthor) 5. [Application of field methods in calculation and design of electromagnetic circuits of electrical machines], pt. I - V, Report IME/WUT Nr 043/501/005/2, Warszawa, 1981-85 (general coordinator) 6. [Field analysis of electromagnetic phenomena in big synchronous machines], pt. I, II, Report IME/WUT Nr 043/501/054/6, Warszawa, 1984-85, (co-author) 7. [Mathematical models and admissible operation states of turbogenerators], pt. I, Report IME/WUT Nr 043/501/113/1, 1986, (co-author) 8. [Field analysis of electromagnetic circuits of non-conventional constructions of electrical machines electrodynamic separator], Report IME/WUT Nr 504/043/312/1, 1991 9. [Optimization of active zone of inductor of electrodynamic separator], Report IME/WUT Nr 504/043/333, 1992 10. [Field calculation of operation characteristics of DC machine algorithms for induced voltage], Report IME/WUT Nr 503/043/348/2, 1992 11. [Field analysis of electromagnetic circuits of non-conventional constructions of electrical machines electrodynamic separator: optimization of tooth depth by different methods], Report IME/WUT Nr 504/395/1, 1994 12. [Field calculation of operation characteristics of DC machine analysis of results], Report IME/WUT Nr 043/503/401/2, 1994 13. [Practical applications of field methods in design of electrical machines influence of constructional parameters of DC motor on mechanical characteristic stability, determination of optimal constructional modifications], Report IME/WUT Nr 503/043/454/5, 1995, (general coordinator) 14. [Electromagnetic separators], Report IME/WUT Nr 504/043/474/1, 1996, (co-author) 15. [Modified algorithm for calculation of effective tooth depth of electrodynamic separator], Report IME/WUT Nr 504/043/504/1, 1997
16. [Linear DC motors], Report IME/WUT Nr 504/043/543/8, 1998, (co-author) 17. [Switch reluctance motor with rolling rotor], GRANT/Report IME/WUT Nr 8 T10A 03114, 1998/99 (co-author) 18. [Elaboration of technical documentation of main constructional elements of switch reluctance motor with asymetrical rotor], Report IME/WUT 01/2001, (co-author) 19. [Modeling and simulation of electrical machines analysis of magnetic circuit of switch reluctance motor with asymetrical rotor], Report IME/WUT Nr 503/G/1043/0631/001, 2001/02, (co-author) 20. [Construction and comparative tests of circuits with better dynamic properties for current measurements], Dean Grant/Report WUT 2001/02, (co-author) 21. [Switch reluctance motors with non-cylindrical rolling rotor], Report IME/WUT 02/2002 (co-author) 22. [Contactless electrical energy transmission to mobil receiver with application amorfic magnetic materials], Grant/Report Nr 4_T10A_007_22, 2002/03, (co-author) 23. [Field optimization of long magnetic circuit of sliding transformer with amorfic core], Report IME/WUT 01/2004, (co-author) 24. [Reluctance machine of discoidal type], Report IME/WUT 01/2005, (co-author) 25. [Spherical modeling of sliding transformers in contactless systems for electrical energy delivery to mobile receivers], Report IME/WUT 03/2005, (co-author) V. Research elaborations with DIRECT APPLICATION IN INDUSTRY 1. [Ventilation and thermic calculation of series Pb and Pf DC machines (construction IP-23 for external ventilation and IP-44 for Pb serie) taking into account the temperature distribution along the armature winding, pt. I, II], Report IME/WUT Nr 501/016/8, Place of application: Factory of Electrical Machines and Transformers EMIT Zychlin, Warszawa 1979-1980, (co-author) 2. [Research of turbogenerators vibrations in Power Station OSTROLEKA exploitation guideline], Report IME/WUT Nr.501/004/8, Place of application: Power Station OSTROLEKA, Warszawa 1983, (co-author) 3. [Elaboration and construction of starting device for 2 asynchrone generators powered by water flow turbines of 250 kw power], Report IME/WUT Nr.16/D/95, Place of application: Water Power Station OPOLE Warszawa 1995 96, (co-author) 4. [Composite-motion electromechanical converter with digital supply device. Research Project - Grant Nr 3-0-299-91-01], Report IME/WUT Nr. 506/-/043/0021, Place of application: Laboratory of Electrical Machines - Institute of Electrical Machines, Warsaw University of Technology, Warszawa 1993, (co-author)
VI. Expertise s for industry 1. [Causes of damage of frequency electromechanical converter SIEMENS 75,5 kva, 10 khz supplying an induction furnace for uranium ores melting]. Sponsor: Instytut Badań Jądrowych (IBJ) Świerk k/warszawy, 1980, (co-author) 2. [Determination of the causes of electrical devices damage on building area of power station RAMIN in Iran], Sponsor: NOT ZUT, Warszawa 1994, Contract Nr ET/21/94 04/1994, (co-author) 3. [Evaluation of technical state of switching devices of medium and low voltage in power distributing switchboard and of control systems state of reserve supplying from own generator in Orbis Hotel S.A.], Sponsor: NOT ZUT, Warszawa, Application Nr TTV/06/93, 03/1993, (co-author) VII. Reviews 1. Archives of Electrical Engineering, Z. Gmyrek, Simulation of Currents in a Squirrel- Cage Induction Motor Fed by a PWM Inverter, 01/1996 2. Grant from Ministry of Science, 2000 (without presentation of title and authors - confidential) 3. Archives of Electrical Engineering, J. Fleszar i inni, Calculation of electromagnetic field, 03/2000 4. Archives of Electrical Engineering, Azza M. Abdel-Hamid, Single phase resistor start of, 07/2000 5. Archives of Electrical Engineering, M. Łukaniszyn, R. Wróbel, A new concept of permanent magnet, 07/2000 6. PhD Thesis, Warsaw University of Technology, A. Smak, [Switch reluctance motor with spherical rolling rotor], 09/2002 7. Przegląd Elektrotechniczny, J. Bakalarczyk, [Simulation of permanent magnets synchronous motor operation at flux decreesing], 06/2002 8. Archives of Electrical Engineering, Azza M. Abdel-Hamid, Application of 1-phase capacitor with 3-phase cage-motors for high starting torques and for braking, 10/2002 9. PhD Thesis, Warsaw University of Technology, H. Wrotek, [Influence of chosen constructional parameters of switch reluctance motor with rolling cylindrical rotor on operation characteristics], 03/2003 10. Przegląd Elektrotechniczny, Jerzy Krygier, [Operation of induction motors at overvoltage], 07/2003 11. Przegląd Elektrotechniczny, Waldemar Morzuch, [Dynamics of rotor of electrical motor loaded by axial force], 05/2006
VIII. Patents 1. [Voltage converter-transformer], Application Nr W-70540, 06/1983, (co-author) 2. [Belt of linear induction motor] Nr 178619, 1984, (co-author) 3. [Electromechanical converter], Nr 167487, 1993 (co-author) 4. [Sliding transformer for contactless electrical energy delivering to mobile receivers], Application Nr P-360028, 05/2003, (co-author) 5. [Primary winding of sliding transformer for contactless electrical energy delivering to mobile receivers], Application Nr P-364606, 01/2004, (co-author) 6. [Contactless electrical machine], Application Nr P-372308, 2005, (co-author) IX. Promotion of PhD and M.Sc Thesis 1. Wichert Torsten, MSc, from Hochschule fur Technik und Wirtschaft Dresden (FH), Faculty of Electrical Engineering, Germany, PhD Thesis: Design and Optimization of Switched Reluctance Machines, date of opening of PhD procedure on Electrical Engineering Faculty (EEF) of Warsaw University of Technology (WUT): 06/2005, Promotor 2. Czapliński Jarosław, student of EEF/WUT, immatriculation number: 158758, MSc Thesis: [Contactless system of electrical energy delivery for mobil receivers], Warszawa, 09/2002, Main Consultant 3. Grzegorz Pyśk, student of EEF/WUT, immatriculation number: 166935, MSc Thesis: [Construction and tests of 3D simulation model of sliding transformer], Warszawa, 09/2003, Main Consultant 4. Arkadiusz Selwester, student of EEF/WUT, immatriculation number: 153382, MSc Thesis: [Field model of tube linear motor], Warszawa, 10/2004, Promotor