USB 3.0 INTERNAL CARD READER 3.5 128580 User Manual
IMPORTANT NOTE Before get started to use the card reader, read these instructions. 1. In some operating systems, the driver software must be installed before the operation. 2. Do not drop or allow forceful impact to the product, or install it in locations exposed by heavy vibrations, as the product will be damaged. 3. Do not disassemble or modify the product in any way. Disassembly or modification may not only void warranty but also could cause damage. 4. Do not use or store the product in damp locations or under high temperature. 5. Liquid entering the product also may cause damage or lead to failures or electric shock. 6. Do not remove the memory cards from card reader while LED indicator is flashing, which indicates the device is being accessed by the computer. 1. Overview Thank you for purchasing the equip USB 3.0 Internal Card Reader 3.5. The SuperSpeed USB 3.0 interface provides a reliable and fast connection for PCs, consumer electronics and communications devices. The equip USB 3.0 Internal Card Reader 3.5 is a powerful device to expand the interfaces of your PC. The easy-to-mount mechanical design with packed screw set allows you an easy installation. In addition, the slot-to-slot data exchange feature enables your data management among several devices at the same time and is more efficient. 2. Key Feature All-in-one card reader, supports CF type I/II, SD/MMC, MS Pro, MS Pro Duo, xd, Micro SD/MC, M2 Supports SDXC, capacity up to 2TB Slots can be used at the same time for data exchange USB bus-powered, no external power supply required Hot swappable and Plug & Play capability Provides USB 3.0 interface, downwards compatible with USB 2.0 standard Black and silver front bezels are included Access from the front panel of your PC directly
With one additional USB 3.0 pass-through port for connecting USB 3.0 devices 3. Package Content 3.5 Internal Card Reader Utility CD Quick Install Guide Spare Bezel in Silver Screw Pack 4. Hardware Installation Caution: Electrostatic discharge may damage electronic components. Ensure the system is properly grounded before using. Handle the product by the plastic stand. Do not touch any electronic components. Turn off your computer and disconnect the power cord before installing the product. Please follow the steps below to install the equip USB 3.0 Internal Card Reader 3.5. 1. Remove the cover of your computer. (Refer to your computer hardware manual for instructions on removing the cover.) 2. Remove the 3.5 drive bay s plastic cover on the PC front panel.
3. Insert the equip USB 3.0 Internal Card Reader 3.5 with cables into the drive bay. 4. Mount the Internal Card Reader firmly in both tracks of the drive bay with the packed screw set. 5. Connect the USB cables between the equip USB 3.0 Internal Card Reader 3.5 and the USB 3.0 ports.
Note: If your computer s USB Ports are outside the chassis, please remove the panel as below first. 6. Plug back the power cord. Power on, then start to install the driver of the USB 3.0 Internal Card Reader 3.5. 5. Utility Installation After you installed the Card Reader to your PC, you need to install the Icon Display utility. (1) Insert the utility disc into the optical drive (2) Click the folder IconMan_R_V1.20_(xD) (3) Click the file IconMan_R_V1.20_(xD)
(4) Click OK to complete the installation. 6. Interface Caution: The card reader provides 5 slots for different types of memory cards application. Each memory card must be inserted into the correct slot. Do not attempt to insert the cards in reverse direction with force. This may damage the memory cards or the slot.
Slot MS/MS Duo SDXC/MMC microsd/m2 CF/MD xd LED Indicator USB 3.0 Definition MS Select, MS ROM, MS PRO, MS Magic Gate, MS PRO Magic Gate, MS-Duo Magic Gate, MS PRO Duo Secure Digital Card series: SD, SD 3.0 UHS-I, SDXC, SDHC, SD Ultra II, mini SD/SDHC, Micro-SD/SDHC MMC card series: MMC-I/-II, MMC 4.0, MMC Dual Voltage, MMC Mobile, MMC 4.0 Dual Voltage, RS-MMC, RS-MMC Dual Voltage, RS-MMC Mobile, RS-MMC 4.0, RS-MMC 4.0 Dual Voltage Micro SD, M2 CF UDMA 6, CF Type I, CF Type II, CF Ultra II, Micro Drive, MagicStor xd, xd M-series, xd H-series On Power / Flash Data Access USB 3.0 Pass-Through 7. Specification 5 Memory Slots SD; CF; MS; xd; Micro-SD/M2 Interface to PC USB 3.0 Front Panel I/O Power Input System Environment Certification System Support USB 3.0 Pass-Through Port USB bus-powered Operating Temperature: 5 C ~ 40 C Operating Humidity: 20%RH ~ 50%RH FCC Class B, CE Win XP, Win Vista 32/64, Win 7 32/64 Linux Kernel ( USB2.0 only )
8. Maximum Capacity of Memory Card Supported CF: 64GB MS Pro Duo: 8GB MMC plus: 4GB SDHC: 16GB SDXC: 2TB Micro SDHC: 16GB M2: 8GB