Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast aluminium. Disconnect tee - Tin plated brass with threaded stud and hexagonal nut take slotted conducr lug. Hardware: Conducr clamp - M0 aluminium or stainless steel (Refer table). Disconnect tee - M or M6 tinned (Refer table) Features: Pre-filled with Alminox jointing compound. Captured hardware permits single ol installation. Order details: Each connecr packed in individual plastic bag. ADT5- ADT5- ADT5-P ADT5-P ADT5 - Conducr Range Stranding Overall Dia. mm 7/3.00 9/3.75 00 9.00.0 Stud Size M6 M6 M6 M6 M Disconnect Tee www.dulmison.com.au Conducr Clamp Hardware Tin Plated Body No No Yes Yes No Used on Conducr Type Copper / Al Copper / Al
Bail Clamp Type ABC 76 3 46 ABC5 Series ABC4 Series 73 Bail Size 7/.75 65 Made from high strength, high conductivity aluminium alloy and fitted with all aluminium hardware. The type ABC bail clamp takes a wide range of conducrs thus reducing sck. Unique side clamp and generous overlapping clamp body shield the line connection from the weather. bolts are captured and permit single spanner installation. Stainless steel hardware is available if required. Supplied pre-filled with Alminox and individually packed in plastic bag. ABC4- ABC4- ABC5- ABC5- Dia. Copper Conducr Range Weight oop mm Stranding Overall Dia. mm kg each Hardware 7/.5 9/3.75 6.75.0 0.4 0.4 0. 0. www.dulmison.com.au -3
Service Tee Connecrs Type STC 3 0 57 Type STC Tee connecrs provide a convenient means of connecting copper service conducrs aluminium overhead mains. The basic clamp is cast in aluminium and various hardware types are available (refer table). Service conducrs are connected the special tin plated split bolt connecr. STC- STC- STC-3 STC- STC- STC-3-4 7/.5 9/3.75 7/.5 9/3.75 STC Conducr Range Stranding Overall Dia. mm 6.75.0 6.75.0 Weight kg each 0.6 0.4 www.dulmison.com.au Service Conducr Range Max. three 7/. (6mm ) cables Max. three 7/. (6mm ) cables in each leg STC Hardware
Service Tee Connecrs Type STC - Cont d The connecr is used with standard line taps when making copper aluminium service connections. B STC6 A STC0 & STC A B STC6- STC6- STC0- STC0- STC0-3 STC- STC- STC-3 Run Conducr Range 7/.75-9/3.75 7/.75-9/3.75 7/. - 9/3.75 7/. - 9/3.75 7/. - 9/3.75 9/.00-9/3.75 9/.00-9/3.75 9/.00-9/3.75 Type STC - Cont d STC0 STCB These clamps are arranged provide bolted tunnels for service take-off conducrs. Materials: High strength aluminium casting. STC0 STCB 7/. - 9/3.75 3/.75-9/3.75 Copper Conducr Stranding A 7/.75 7/.75 7/.75 7/.75 7/.75 9/.00 9/.00 9/.00 7.5 -.0 5.9 -.0 Appln ength Bmm 5 5 55 55 55 600 600 600 0.65 0.73 Total ength mm 07 07 35 35 35 5 5 5 Previous Reference STC-6 STC-6 STC-0 STC-0 STC-0 -------- -------- -------- Max. two 9/. (5mm ) cables Max. one 7/3.75 (mm ) cable Mating ine Tap B4 B4 B4 B4 B4 B5 B5 B5 Hardware Run Conducr Range Weight Service Cond. Hardware Stranding Overall Dia. kg each Range Clamp Take Off St Steel self cutting Galvanised www.dulmison.com.au -5
Service Tap Type AC for and ACSR Conducrs High strength, high conductivity aluminium alloy, properly proportioned minimise stress corrosion and deterioration by galvanic action. Keying tabs on connecr body halves prevent mismatching. Hexagon head, high strength bolt provides one wrench installation. Supplied pre-filled with Alminox joint compound. AC5- AC5- AC5-3 AC75- AC75- AC75-3 -6 Run 7/3.00 7/4. 7/4. 9.75 Conducr Range Overall Dia. Tap Overall Dia. 9.00 3. 3..0 7/.04 9/.7 7/.75 9/.4 3..90 5.5 0. www.dulmison.com.au mm 44 Std. Pack 0 Weight kg each 0. 0.3 Hardware
Split Bolt Clamp Type B Manufactured E.S.A.A. specification from hard drawn brass. Accommodates two maximum conducrs as specified in table below. Standard finish is natural brass. Electro-tinned finish can be supplied when specified. Minimum order quantity is standard pack. Natural Brass B B4 B5 B6 B Electro Tinned BT B4T B5T B6T BT Max. Conducr Std. Pack Area Overall Width Std. Weight mm Dia. of slot Pack kg 6 5 5.0 7.65 0..60 7.64 5.30.30 0.90.90. 00 5 0 5 3.00.60..00.30 Mating Plastic Shroud BSHROUD S4763 S4764 S4764 S4733 www.dulmison.com.au -7
Parallel Clamp Type AUP - for aluminium only Features: Materials: Hardware: Massive design and large space provide maximum protection against overload conditions. Spacing of U-bolts, tapered bell mouths and modified V-groove minimise cold flow, eliminate cable chafing and produce wiping action on conducrs. Body - aluminium alloy casting; Stainless steel. AUP5 AUP75 AUP AUP - Run Stranding 7/.5 7/4. 7/3.75 9/3.75 9/3.75 6/3.5 9/3.75 6/3.5 Parallel Clamp Type KA Conducr Range Tap Overall Dia. Stranding 6.75 3..30.0.0 9.30.0 9.30 7/.5 7/4. 7/3.75 9/3.75 7/3.75 37/3.00 9/3.75 6/3.5 A rugged connecr for heavy duty service connections. Compact construction permits quick and easy insertion of conducrs. Materials: High strength copper content alloy. Neoprene rings capture bolts during installation thus preventing their loss. Hardware: High strength, corrosion resistant stainless steel bolts, nuts and washers. KA KA KA3 KA4 KA4C KA5 Conducr Range Run Tap Area mm Overall Dia. Area mm 5 0 5 5 6.4.90.90 0. 0..60 4. 5.75 0. 7.64 7.64 0.5 www.dulmison.com.au 4 4 4 6 5 6 Overall Dia. 6.75 3..30.0.30.00.0 9.30 Overall Dia..55.90.55 0..55.60 5.0 5.75 7.65 7.64 5.0 0.5 Weight each kg 0.4 0.4..90 Weight each kg 0. 0.4 0.5 0.4 0.5 0.65
Parallel Groove Clamps - Copper Material is forged copper for copper copper connection throughout the conducr range. The clamps have serrated transverse grooves for maximum conducr contact, use copper bolts and utilise belleville washers prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibir. 309-FS 3030-FS 303-FS DPG40 DPG60 Replaces PGC007 PG06 DPG PG06K PG06K PGC009 DPG5 PG6K PGC65 DPG5 N/A N/A Type F/T F/T F/T E/N E/N Product Selection Matrix Bolt Conducr Range Dimensions mm No./Size Torque mm O.D. B H of Bolts 0Nm 0Nm 30Nm 40Nm 40Nm 6 6 6 300 400.7 0.5 5..5 5. 5.7 5.7 0.3.6 6.7 40 7 05 Type: F = Forged body; T = Transverse groove; E = Extruded body; N = No groove. Copper Area of Cable - Copper mm 6 0 6 5 0 5 300 400 Area of Cable - Copper - mm www.dulmison.com.au -9 4 5 65 75 4 56 xm xm x M0 x M 3 x M Wt kg 0.9 0.6 0.43 0.90.67 6 0 6 5 0 5 300 400 H B
Parallel Groove Clamps - Material is forged aluminium for aluminium aluminium connection throughout the conducr range. The clamps have serrated transverse grooves for maximum conducr contact, use galvanised steel bolts and utilise belleville washers prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibir. 399-FS 393-FS 393-FS 94-FS PGA303-0 Replaces PGA607 PGA6 AA60 PGA55 AA AA53** PGA303 AA3003 Type F/T F/T F/T E/P F/T Bolt Conducr Range Dimensions mm No./Size Torque mm O.D. B H of Bolts Nm Nm 40 Nm 40 Nm 46 Nm 6 6 0 5 300 5. 0.5 5. 4.0 6.3 5.7 7.5 0. 7.5.5 Type: F = Forged body; T = Transverse groove; E = Extruded body; N = No groove. ** bolt version available - 53-Fs Product Selection Matrix Area of Cable - mm Alum 6 0 6 5 0 5 300 400 Area of Cable - - mm www.dulmison.com.au 40 55 05 36 45 65 6 0 6 5 0 5 300 400 65 40 76 75 xm xm x M0 x M0 3 x M0 B Wt kg 0.09 0.4 0. 0.39 0.46 H
Parallel Groove Clamps - Bimetal Material is forged aluminium clamp with a friction welded copper insert clearly marked in blue for making copper conducr connections. The clamps have serrated transverse grooves for maximum conducr contact, use galvanised steel bolts and utilise belleville washers prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibir. 399-FS 3909-FS 39-FS 393-FS 3-FS Replaces PGB0 PGB607 PGB55 PGB3 PGB303 Type F / T F / T F / T F / T F / T Conducr Range Dimensions Bolt Run Copper Tap mm Torque mm O.D. mm O.D. B H 9 Nm Nm Nm 5 Nm 5 Nm 6-6 - 5 - - 5-300 5. -.5 5. -.7 6.3-5. 7. - 7. 7. -. Type: F = Forged body; T = Transverse groove Product Selection Matrix Bi-metal Area of Cable - Copper mm 6 0 6 5 0 5 300 400 6-6 - 0 - - 5 - Area of Cable - - mm.75-9.0.75-9.0 5.0 -. 7. - 7. 7. - 0.0 6 40 40 96 05 4 4 45 57 65 40 45 66 76 No./Size of Bolts x M x M x M 3 x M0 3 x M0 6 0 6 5 0 5 300 400 H Wt kg 0. 0. 0.5 0.44 0.6 www.dulmison.com.au - B
Parallel Groove Clamps Type TDP with Parallel Sides A universal aluminium line tap for equal and unequal combinations of aluminium and ACSR conducrs. Materials: Die cast aluminiuim Hardware: is standard but galvanised or stainless steel is available. TDP5- TDP5-3 TDP75- TDP75-3 Notes: - Run Stranding 7/.75 7/4. 7/.75 7/4. 7/. 9/3.75 7/. 9/3.75 Conducr Range Tap Overall Dia. Stranding 5.5 3. 5.5 3. 7. 9.00 7. 9.00 7/.75 7/4. 7/.75 7/4. 7/. 9/3.75 7/. 9/3.75 For aluminium copper connections add 'P' for plating e.g. TDP75-P. Not recommended for polluted or coastal locations. www.dulmison.com.au Overall Dia. 5.5 3. 5.5 3. 7. 9.00 7. 9.00 mm Hardware
Parallel Groove Clamps Type T, TD, TX with Interlocking Fingers Type T Type TD Type TX A universal aluminium line tap for equal and unequal combinations of aluminium and ACSR conducrs. The clamp has interlocking fingers for maximum conducr contact. Materials: Die cast aluminiuim Hardware: is standard but galvanised or stainless steel is available. T43- T43- T43-3 T75- T75- T75-3 TD5- TD5- TD5-3 TD75- TD75- TD75-3 TX75- TX75- TX75-3 TX6- TX6-3 Notes: Conducr Range Run Tap Stranding Overall Dia. Stranding Overall Dia. 7/. - 7/3.75 7/. - 7/3.75 7/. - 7/3.75 9/.7-9/3.75 9/.7-9/3.75 9/.7-9/3.75 7/.75-7/4. 7/.75-7/4. 7/.75-7/4. 9/.7-9/3.75 9/.7-9/3.75 9/.7-9/3.75 7/3.00-9/3.75 7/3.00-9/3.75 7/3.00-9/3.75 9/3.5-6/3.75 9/3.5-6/3.75 5.0 -.30 5.0 -.30 5.0 -.30.90 -.0.90 -.0.90 -.0 5.5-3. 5.5-3. 5.5-3..90 -.0.90 -.0.90 -.0 9.00 -.0 9.00 -.0 9.00 -.0 6.30-33.0 6.30-33.0 7/. - 7/3.75 7/. - 7/3.75 7/. - 7/3.75 9/.7-9/3.75 9/.7-9/3.75 9/.7-9/3.75 7/.75-7/4. 7/.75-7/4. 7/.75-7/4. 9/.7-9/3.75 9/.7-9/3.75 9/.7-9/3.75 7/3.00-9/3.75 7/3.00-9/3.75 7/3.00-9/3.75 9/3.5-6/3.75 9/3.5-6/3.75 5.0 -.30 5.0 -.30 5.0 -.30.90 -.0.90 -.0.90 -.0 5.5-3. 5.5-3. 5.5-3..90 -.0.90 -.0.90 -.0 9.00 -.0 9.00 -.0 9.00 -.0 6.30-33.0 6.30-33.0 For aluminium copper connections add 'P' for plating e.g. TD75-P. Not recommended for polluted or coastal locations. Fig. No. mm 4 4 4 0 0 0 9 9 www.dulmison.com.au -3 3 3 3 3 3 Hardware St Steel St Steel St Steel St Steel St Steel St Steel
Easitap - Tee Off Connecrs Type V Type V-ET An extremely versatile three-piece connecr for all combinations of mains and tee off conducrs. Typical connections include: Parallel tap; Tee connections; Cross connections and End--end connections. Materials: Current carrying centre plate and outer planes are high strength copper alloy, Type V-ET are electro tinned. Stainless steel Hardware: All edges rounded for easy insertion of conducr. Typical Connections Type V Cat. No. VB VB V3B V4B V5B V6B V7B VB V9B V0B H -4 Type VET Cat. No. VET VET VET3 VET4 VET5 VET6 VET7 VET VET9 VET0 W Fig. No. Metric Conducr Range Run Tap Area mm O.D. Area mm O.D. Dimensions mm Min. Max. Min. Max. Min. Max. Min. Max. B H J W 6 0 0 0 B 0 0 0 0 5.0 7.65.90.60.90.60 4. 0.5 4. 0.5 4. 0.5 0.5.0 0.5.0 0.5.0 0.5.0 J 6 6 6 0 6 0 0 www.dulmison.com.au 5. 7.65 5. 7.65.9.46 5. 7.65.9.46 4. 0.5 5. 7.65.9.46 4. 0.5 0.5.0 Fig. Fig. H W 37 46 37 43 5 37 46 5 6 B 40 49 56 56 57 6 73 7 7 0 0 0 0 0 0 J 37 4 46 49 46 5 59 6 6 6
Kulugs Type Q C K bolt size For use wherever conducrs are terminated. Easy installation - only a single nut tighten. High mechanical strength, simple disconnect, reusable. Type Q Material: Brass clamp body & nut T H Old Ref. Conducr Range Dimensions mm Area mm Overall Dia. mm C H K T Std. Pack H0 H03 H04 H05 H06A H06 H07 H0 Q Q3 Q4 Q5 Q6 Q6 Q7 Q 0-6 5- - - 0-5 5-300 - 400 4.05-5.0 6.75-7.65.90-0. 0. -.60 4. - 5.75 5.75-7.64 7.64-0.5.6-5.65 9 5 3 3 3 3 44 5 5 7 34 3 45 45 53 63 M M0 M M M6 M6 M0 M0 4 53 60 65 76 76 6 9 6 5.5 6.4 7.9.7.7 0.3.7 0 0 0 0 www.dulmison.com.au -5