Diesel / LG
The CLARK GTS is fitted with a powerful and economical diesel engine or LG engine.
Automotive-style ergonomics Tiltable steering column The tiltable steering column can be adjusted to the driver's Hand parking Brake The lever-style hand brake is easliy applied in the same way as a car. Convenient console A convenient console is located on the left, facilitating storage for any work documents. improved reliability. *Advantage of wet disc brakes 1. Lower maintenance costs 2. Smooth braking 3. Eco friendly work condition Ergonomic design For the driver's convenience, hood mounted hydraulic levers are included to minimize fatigue. The work safety standard is enforced with a Flow Regulator on the lifting cylinder to prevent accidental mast lowering. Full suspension seat A full suspension seat is standard to minimize driver fatigue. j 75 degree reclining of the seat is possible with a 50 to130kg driver. Designed for the driver's utmost comfort by supporting their back and hips during long working periods. j Suspension distance of 20-60 helps provides exceptional shock absorption.
Specifications WT Tyres, Chassis Dimensions erformances I.C.-Engine Addit. 1.1 Manufacturer (Abbreviation) Unit CLARK DIESEL MODELS 1.2 Manufacturer s designation GTS20L GTS25L GTS30L GTS33L 1.5 1.6 Load capacity / rated load Load centre distance t 2.0 2.5 3.0 1.8 Load centre distance, centre of drive axle to fork face 460 475 1.9 Wheelbase 2.1 Service weight 3396 3700 4070 4276 2.2 Axle loading, laden front / rear 40/750 5450/860 6240/930 6870/860 2.3 Axle loading, unladen front / rear /1930 1476/2364 1646/2624 1677/2753 3.1 Tyre type, = pneumatic, SE = superelastic, C = cushion (1) 3.2 Tyre size, front Tyre size, rear 7.00X12-14R 6.0x9-10R 7.00X12-14R 6.0x9-10R 28X9X15-14R 6.5x10-12R 28X9X15-14R 6.5x10-12R 3.5 Wheels, number front/rear (x = drive wheels) 3.6 3.7 Tread, front Tread, rear 996 (1075/1204) 996 (1075/1204) 1029(9/1204) 1029(1129/1204) 4.1 Tilt of upright/fork carriage, F/R Degrees 4.2 Height, upright lowered 2 2 4.3 Freelift 4.4 Lift height (2) 3 4.5 Height, upright extended (with LBR) 4415 4415 4415 4385 4.7 Height overheadguard (cab); Std / Container 4.8 Seat height 4.9 Coupling height 4.19 Overall length 3643 3737 3842 3890 4.20 Length to face of forks 2573 2667 2772 2820 4.21 Width 4.22 Fork dimensions 45X122X1070 50X122X1070 4.23 Fork carriage DIN 15173, 4.31 Ground clearance minimum 4.32 Ground clearance centre of wheelbase 4.33 Right angle stack aisles 3950 4040 4145 4185 4.35 Outside turning radius 2290 23 24 2510 5.1 5.2 Travel speed laden/unladen Lift speed laden/unladen km/h 16.9/18.0 0.52/0.57 16.5/18.0 0.52/0.57 17.6/18.8 0.50/0.55 18.9/20/3 0.46/0.50 5.3 Lowering speed laden/unladen 0.50/0.43 5.6 Drawbar pull laden/unladen 2252/776 2189/721 2015/775 2/9 5.8 Max. gradeability laden/unladen 45.6/22.6 37.2/19.3 29.4/19.0 28.1/18.2 5.9 Service bake 7.1 Manufacturer / Type 7.2 Rated output acc. per ISO 1585 kw 7.3 Rated speed acc. DIN 70 020 RM 7.4 No. of cylinders / displacement #/cm3 8.1 Type of control 8.2 Operating pressure for attachments Bar 8.3 Oil volume for attachments L/min 8.4 Sound level, driver s ear db (A) (1) Optional with Superelastic/Solids (2) More lift heights available (3) At friction coefficient 0.6 4/2359
Specifications WT Tyres, Chassis Dimensions erformances I.C.-Engine Addit. 1.1 Manufacturer (Abbreviation) Unit CLARK LG MODELS GTS20L GTS25L GTS30L GTS33L t 2.0 2.5 3.0 Load centre distance, centre of drive axle to fork face 460 475 1.9 Wheelbase 2.1 Service weight 33 3730 40 43 2.2 Axle loading, laden front / rear 46/6 5350/860 6260/830 60/8 2.3 Axle loading, unladen front / rear 14/1900 13/2350 1/25 1610/2770 3.1 Tyre type, = pneumatic, SE = superelastic, C = cushion (1) 3.2 Tyre size, front 7.0x12-14R 7.0x12-14R Tyre size, rear 6.0x9-10R 6.0x9-10R 28x9x15-14R (7.00X12-14R) 6.5x10-12R 28x9x15-14R (7.00X12-14R) 6.5x10-12R 3.5 Wheels, number front/rear (x = drive wheels) 3.6 3.7 Tread, front Tread, rear 996 996 1029 1029 4.1 Tilt of upright/fork carriage, F/R Degrees 4.2 Height, upright lowered 2 2 4.3 Freelift 4.4 Lift height (2) 3 4.5 Height, upright extended (with LBR) 32 32 3862 3902 4.7 Height overheadguard (cab); Std / Container 4.8 Seat height 4.9 Coupling height 4.19 Overall length 3643 3737 3842 3890 4.20 Length to face of forks 2573 2667 2772 2820 4.21 Width 4.22 Fork dimensions 45X122X1070 50X122X1070 4.23 Fork carriage DIN 15173 4.31 Ground clearance minimum 4.32 Ground clearance centre of wheelbase 155 155 4.33 Right angle stack aisles 3950 4040 4145 4185 4.35 Outside turning radius 2290 23 24 2510 5.1 5.2 Travel speed laden/unladen Lift speed laden/unladen km/h 17.2/18.3 16.9/18.3 18.3/19.5 19.6/20.6 5.3 Lowering speed laden/unladen 0.53/0.50 0.50/0.43 5.6 Drawbar pull laden/unladen) 2252/776 2189/721 2015/775 2/9 5.8 Max. gradeability laden/unladen 45.6/22.6 37.2/19.3 29.4/19.0 28.1/18.2 5.9 Service bake 7.1 Manufacturer / Type 7.2 Rated output acc. per ISO 1585 kw Theta 2.4LG Theta 2.4LG Theta 2.4LG Theta 2.4LG 7.3 Rated speed acc. DIN 70 020 RM 7.4 No. of cylinders / displacement #/cm3 8.1 Type of control 8.2 Operating pressure for attachments Bar 8.3 Oil volume for attachments L/min 8.4 Sound level, driver s ear db (A) 1.2 Manufacturer s designation 1.5 1.6 Load capacity / rated load Load centre distance 1.8 (1) Optional with Superelastic Tyres (4) At friction coefficient 0.6 (2) More lift heights available (5) Without load backrest (3) Laden with 1.6km/h
Dealer CLARK INTERNATIONAL SOUTH ACIFIC 30 Salisbury Road, Hornsby NSW AUSTRALIA Tel: 94778444 Fax : 02 9476 2241 Info: clark@clarkequipment.com - www.clarkforklifts.com.au 2015 CLARK Material Handling Company