lindab duct suspension & support Duct suspensions & Support s
lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and channel brackets Threaded rod OSB 0...0 Supported cantilever CL... 0 CLS... 0 Rectangular plain washer SB... Channel RPA... 0 RPC... 0 Hexagonal studding connector Eye bolt OSM... EB... Channel slide nuts Haer head bolt CN... 0 CNS... 0 CNLS... CNSS... HHB... Circular suspension Duct support DH... RK...0 Haer top screw HTS... Duct holder MDH... Channel end cap CEC... Suspension rings UV... UV0... UVH... UVH0...00 We reserve the right to make changes without prior notice
lindab duct suspension & support Content Duct suspensions & Support s Brackets L-fastener WCL... Fastener bracket Z-fastener MP fastener Toggle Coil wire WCLT... WCZ... WCMP... VIPPB... SPTRAD... Brackets Beam clamp Frame support WCRVG... WCVG... WCZGM... WCLGM... BCT...0 BC...0 Stand... We reserve the right to make changes without prior notice
lindab duct suspension & support Duct suspension FB ensions FB Ø, Ø, FB 0 Ø,0 Ø,0 Ø, 0, FB 0 Ø, Ø, Ø, 0 0, Description Suspension band Suspension bands are designed to suspend air ducts. It is easy to cut and bend and allows a quick and economical method of assembly. The perforated suspension steel band is made of steel with assorted holes, which, according to the type selected, allow fixing of threaded rods, threaded clamps, bolts, etc. The small holes can be used with rivets, screws or nails. Type Width m Material FB 0, galvanized FB 0, galvanized FB 0 0 0, galvanized FB 0 0, galvanized FB 0 0, galvanized FB 0, galvanized FB 0 0 0, stainless FB 0 0,0 stainless FB 0 FB 0 FB 0 FB 0 Ø,0 Ø, Ø, Ø,0 Ø, Ø, Ø, Ø, Ø, Ø, 0 0, 0,, 0, 0,0 Width FB0 0, We reserve the right to make changes without prior notice
lindab duct suspension & support Duct suspension FB Technical data Max load for different fire classes (Kg) R R 00 C 0 min Type class. FB0 0, 0 FB0 0, 0 FB0,0 0 0 0 FB0 0, 0 FB0 0, 0 FB0, 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Threaded rod OSB 0 ensions 0 0 Thread axis Description The threaded rod is according to the standard DIN -. That means that the thread angle is 0. Property class:. Surface finish: Electro zinc plated Max load for different fire classes (Kg) No fire classification Fire classification Tensile strength Yield strength ension Type At safety factor Recoended max load at safety factor Recoended max load at fire classified installations [] [kn] [kn] [kn] [kn] M 00 0,,,0 M 000 0,,,0 M 00 0,,,0,0 M 000 0,,,0,0 M 00 0,,,0,0 M 000 0,,,0,0 class. R R 00 C 0 min M 0 M 0 0 0 0 M 0 0 0 0 M 0 0 0 0 ension l Type OSB 000 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Duct suspension SB Rectangular plain washer Surface finish: Hot dipped galvanized. b 0 b b ension b OSM Hexagonal studding connector Used together with threaded rod to reduce wastage to a minimum. Threaded in both ends with a stop in the middle. Surface finish: Electro zinc plated. M 0 M 0 M 0 M 0 Max load for different fire classes (Kg) SB R R 00 C 0 min class. M 0 0 M 0 0 0 0 M 0 0 0 0 0 M 0 0 0 0 0 M 0 0 0 0 0 ension OSM 0 SB FB We reserve the right to make changes without prior notice
lindab duct suspension & support s l Duct suspension EB Eye bolt Surface finish: Electro zinc plated. M, M, M, Max load for different fire classes (Kg) R R 00 C 0 min class. M 0 0 0 0 M 0 0 0 0 M 0 0 0 0 ension EB We reserve the right to make changes without prior notice
lindab duct suspension & support Duct holder DH ensions Ø d L A B Description Used to fix ducts standing on joists. Is provided with fixing holes in the base. Varying height can be arranged by installing two duct supports, one inside the other. These can be locked with two self-tapping screws on each short side. The L dimension can then vary: for Ø 0 between 0 and 00, for Ø 0 between 0 and 0. Can also be delivered in additional sizes. ension Height L DH 0 0 nom * Reinforced A B L m kg 0 0 0,0 0,0 0 0 0 0, 0 0,0 0 * 0 0 0, 0 * 0, * 0 0 0, * 0, 0 * 0 0 0, 0 * 0, 00 * 0 0 0 0, 00 * 0 0, 0 * 0 0 0, 0 * 0,0 0 0 0, 0, 00 0 0 0 0, 00 0 0,0 00 0 0 0 0, 00 0 0, 0 0 0,0 0 0, We reserve the right to make changes without prior notice
lindab duct suspension & support Duct holder DH Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Duct holder MDH Ø 00 h M b d Description The folded shape of the duct holder and its multiple of fixation points makes the duct very firmly attached. The duct holder is suitable for of all types of duct mounting. I.e. vertical and horizontal onto a wall, hanging under a ceiling and standing on a floor. The screw holes are easy to access and shaped like double key-holes which makes the mounting fast and easy. Ø 0 0 h The duct is fastened with help of suspension rings UV0 or UVH0, which are threaded through the duct holder. ensions M M Ø 0 00 b h d d b nom b d h m kg 0 0 0 0, 0 0 0, 0 0 0, 0 0 0 0, 0 0 0 0, 0 0 0 0, 00 0 0 0, ension Distance to fixing surface, h MDH 0 0 0 0, 0 0 0 0, 0 0 0 0 0, 00 0 0 0,0 0 0, We reserve the right to make changes without prior notice
lindab duct suspension & support Duct holder MDH nom b d h m kg 0 0, 00 0 0,0 0 0 0, 00 0 0, 0 0 0 0,00 00 0 0, 0 00 0, 00 0, 00 00 0, 00 00 0, 00 00 0,0 0 00 0, 0 00 0,0 Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min 0 00 0 00 0 0 0 0 Side R R Smoke 0 min 0 00 0 00 0 00 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Suspension rings UV ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV 00 nom t Can also be delivered in additional sizes. m kg 0,0 0, 0,0 0,,0 0, 0,0 0, 00,0 0, 0,0 0,,0 0,,0 0, 00,0 0, 0,0 0, 00,0 0, 0,0 0, 0,0 0,0 Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 0 0 0 0 0 00 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Suspension rings UV0 ensions Ø, t Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV0 00 0 nom t Can also be delivered in additional sizes. m kg, 0,0 0, 0, 0, 0,, 0, 0,0 0,0 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0, 0,00 0, 00,00 0, 00,00, 0,00, Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Suspension rings UVH ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. code ension UVH 0 nom t Can also be delivered in additional sizes. m kg 0,0 0,0 0,0 0,0,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0,0 0,0,0 0,0 00,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0 0,0 0,0 Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 0 0 0 0 0 00 0 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Suspension rings UVH0 ensions Ø, t 0 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. code ension UVH0 00 nom t Can also be delivered in additional sizes. m kg 0, 0, 0, 0,, 0, 0,0 0, 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0,0 0,00 0, 00,00, 00,00,0 0,00, Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 00 00 00 00 00 00 00 We reserve the right to make changes without prior notice
lindab duct suspension & support Circular suspension DRSN ensions Ø 00 Ø0 0 t t 0 t Description For suspension of circular ducting. Combined connection nut M/M and slotted quick closure for Ø 00. Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0,0 0, 0, 00, 0,, 0, 0, 0, 0, 0, 00, 0,, 0,, 0, 00, 0, 0, 0, 00, 0, 0,,00 00,,0 0,,,, 00,, code ension DRSN 0 00,, 00,, 0,,00 0,,0 We reserve the right to make changes without prior notice 0
lindab duct suspension & support Circular suspension DRSN Technical data Max load for different fire classes (Kg) Topnut class. R R 00 C 0 min 00 0 0 Side class. R R 00 C 0 min 0 0 0 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Circular suspension DRSNR ensions Ø 00 t Ø0 0 0 t Description For suspension of circular ducting. With vibration-damping internal rubber lining. Combined connection nut M/M and slotted quick closure for Ø 00. code ension DRSNR 0 Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0, 0, 0,0 00, 0,, 0, 0, 0, 0, 0, 00, 0,0, 0,, 0, 00, 0, 0,,0 00,, 0,, 00,,0 0,,0,,0 00,,0 00,,00 00,,0 0,,0 0,,0 We reserve the right to make changes without prior notice 0
lindab duct suspension & support Circular suspension DRSNR Technical data Max load for different fire classes (Kg) Topnut class. R R 00 C 0 min 00 0 0 Side class. R R 00 C 0 min 0 0 0 0 We reserve the right to make changes without prior notice
0 00 lindab duct suspension & support Duct holder RK ensions Description Hot dip galvanized duct holder with foot. The ring is joined with two M bolts and nuts. The leg is joined with a M bolt and nut. 00 0 The foot has four fastening holes. nom Ring material m kg 0 0,0 0,0 0 0,0 00 0,0 0 0,0 0,0 00 0,00 00 0,0 0 0,0 00 0,0 00 0,0 0 0,0 ension RK 00 We reserve the right to make changes without prior notice 0
lindab duct suspension & support s Channels and channel brackets CL Cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile. 0 0 l 0 m kg Ø 0 0,0 00 0,0 0 0, 00 0, 00 0, CL 00 CLS Supported cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile.the diagonal support bar makes it suitable for heavy loads. a b l 0 a b m kg 00 00 0, 00 00 0, 00 00 0,0 00 0,0 00 0, 00 0, CLS 00 Ø 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Channels and channel brackets RPA Channel Surface finish: Electro zinc plated. SLOT/ PLAI A B 0 0 000 SLOT 0 0 000 SLOT class. 00 C 0 min t B A c/c 0 c/c Ø,, B 00 lx B ension A B Type RPA 00 000 SLOT We reserve the right to make changes without prior notice 0
lindab duct suspension & support s Channels and channel brackets RPC Channel Surface finish: Electro zinc plated. Available as plain or slotted. A B SLOT/ PLAI t 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, A B 000 PLAI, 000 PLAI, 000 SLOT, t =, c/c 0 A 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, t =, B class. 00 C 0 min lx lx ension A B Type RPC 000 SLOT, 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Channels and channel brackets Channel slide nuts Channel slide nuts and springs are self aligning and are specially manufactured to complement the range of RPC channels. The slide nut can be moved along the channel for ease of alignment whilst the springs tension the nut against the internal channel lips to facilitate installation. In addition to the shape of the slide nuts prevents turning inside the channel eliminating the need to grip the nut whilst inserting bolts or threaded rod. CN Channel nut, without spring 00 C 0 min class.,, 0 ension CN CNS Channel nut with spring ension CNS We reserve the right to make changes without prior notice 0
lindab duct suspension & support s Channels and channel brackets CNLS Channel nut long spring 00 C 0 min class.,, 0 ension CNLS CNSS Channel nut short spring 00 C 0 min class.,, 0 ension CNSS We reserve the right to make changes without prior notice
lindab duct suspension & support s Channels and channel brackets HHB Haer head bolt 0 0 0 0 0 0 HTS Haer top screw 00 C 0 min class.,, 0 ension 0 0 0 0 0 0 HHB 0 00 C 0 min class.,, 0 ension HTS 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Channels and channel brackets CEC Channel end cap for channel for channel For cannel CEC We reserve the right to make changes without prior notice
lindab duct suspension & support s Brackets WCL L-fastener Surface finish: Electro zinc plated. l l Ø 0 0 Max load for different fire classes (Kg) WCLT Fastening bracket Surface finish: Electro zinc plated. R R 00 C 0 min class. 0 0 0 0 0 0 code ension WCL l 0, 0, 00, l Ø, ( ) 0 0 Max load for different fire classes (Kg) R R 00 C 0 min class. 0 code ension WCLT 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Brackets WCZ Z-fastener Surface finish: Electro zinc plated. Ø Max load for different fire classes (Kg) WCMP MP-fastener For hanging in corrugated sheet metal roofing. The fastener fits wave bottoms of width 0 0. The fastener angle has holes of Ø,, intended for blind rivet or sheet metalscrew B. The fastener can handle a weight of kg without any deformation. R R 00 C 0 min class. 0 0 0 0 0 0 code ension 0 0 0 0 0 code ension WCZ WCMP 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Brackets VIPPB Toggle For hanging in corrugated sheet metal roofing. 0 code ension VIPPB SPTRAD Coil wire Galvanized insulation thread. code ension SPTRAD We reserve the right to make changes without prior notice
lindab duct suspension & support Brackets WCRVG ensions º 0, 0 Ø, º, Ø, Ø Description RV suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCRVG Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Brackets WCVG ensions 0 Ø ( ) Ø Ø 0 Description V suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCVG Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min We reserve the right to make changes without prior notice
lindab duct suspension & support Brackets WCZGM ensions Ø, ( ) Ø 0 Ø Description Z suspension profile with shock absorbing rubber For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCZGM Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min 0 We reserve the right to make changes without prior notice
lindab duct suspension & support Brackets WCLGM ensions Ø ( ),, Ø Description L suspension profile with shock absorbing rubber 0 Ø For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCLGM Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Brackets Beam clamp To fix on to beams without welding or drilling. With hexagon head screw DIN., threaded end with cup point according to EN ISO and locknut DIN. Available as threaded (BCT) or not threaded (BC). Material: Body made of malleable cast iron, zinc plated, casting tolerance acc. to DIN GTA /. BCT Threaded rod hole. M M M BC Not threaded rod hole. Max load for different fire classes (Kg) R R 00 C 0 min class.,, 0 ension BCT 0 We reserve the right to make changes without prior notice
lindab duct suspension & support s Frame support Stand Consisting of square tubes and a number of parts which are used to create a range of different structures. This stand is made up of square tubes in accordance with DIN and materials in accordance with SIS. The load diagram indicates the maximum permissible load with regard to flex sensing and does not take deflection into account. The diagram indicates the maximum permissible load for different distances between the supporting legs without exceeding the limit load in accordance with the Swedish Fatigue Design Code for Welded Structures, StBK-N, static load. This load diagram is applicable to all horizontal tubes with their associated supports, provided that there are no lateral forces. Load, kg 00 00 00 00 00 B A 00 Square part SSTP Square tube SSR 0 0 c/c for support, m 0,,0,,0,0 0 0 A = Extended, evenly distributed static load tubes x x, B = Centrically applied static spot load x x, Example Load 0 kg, distributed evenly Stand tube x gives a max c/c between supporting legs of, m SSR Square tube Surface finish: Hot dipped galvanized., 000 SSR We reserve the right to make changes without prior notice
lindab duct suspension & support s Frame support SSTP T-piece Surface finish: Electro zinc plated. 0 0,0 SSF Support foot Surface finish: Electro zinc plated. 0 0,0 SSFA Adjustable foot Surface finish: Electro zinc plated. 0 0,0 SSTP SSF SSFA SSH Corner piece Surface finish: Electro zinc plated. 0 0,0 SSH We reserve the right to make changes without prior notice
lindab duct suspension & support s Frame support SSB Angle internal and external Surface finish: Electro zinc plated. SSB Angle 0 Surface finish: Electro zinc plated. SSVA Wall attachment Surface finish: Electro zinc plated. SSKV Corner X Surface finish: Electro zinc plated. 0 0,0 Angle 0 0,0 Angle 0 0,0 0 0,0 SSB SSB 0 SSVA SSKV We reserve the right to make changes without prior notice
lindab duct suspension & support s Frame support SBEI Pipe cover, inside Material: Plastic. for square tubes for square parts ension SBEU Pipe cover, outside Material: Plastic. for square tubes for square parts ension GMATTA, GKUDDE Anti-vibration mat Plain rubber mat, or thickness with 0 shore, or ribbed mat, designed for vibration damping, thickness with 0 shore. SBEI 0 SBEU 0 Code GMATTA 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE We reserve the right to make changes without prior notice