TITLE SPECIFICATION FOR MASTER PADLOCKS, CYLINDER LOCKS AND KEYS REFERENCE REV DATE: JAN 2009 PAGE: 1 OF 26 TABLE OF CONTENTS Page FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES... 4 3 DEFINITIONS... 4 4 PADLOCK... 4 4.1 General... 4 4.2 Type... 4 4.3 Category... 4 4.2 Case... 5 4.3 Colour... 5 4.4 Shackle... 5 4.5 Keys... 5 4.6 Keyway... 6 4.7 Dimensions... 6 4.8 Mechanisms... 6 5 MECHANICAL STRENGTH... 7 6 CYLINDER LOCK... 7 6.1 Requirements... 7 6.2 Dimensions... 8 7 MATRIX... 9 8 TESTS... 9 9 MARKING, PACKING AND DOCUMENTATION... 9 9.1 Marking... 9 9.2 Packing... 10
PAGE 2 OF 28 9.3 Documentation... 10 9.4 Samples... 10 10 QUALITY ASSURANCE... 10 ANNEX A - Bibliography... 11 ANNEX B - Revision information... 12 9.4 Samples... 13 5 MECHANICAL STRENGTH... 13 ANNEX C - Item No. 1 Blue Master Padlock and Keys... 14 ANNEX C - Item No. 2 Black Master Padlock and Keys... 16 ANNEX C - Item No. 3 Yellow Master Padlock and Keys... 18 ANNEX C - Item No. 4 Green Master Padlock and Keys... 20 ANNEX C - Item No. 5 Orange Master Padlock and Keys... 22 ANNEX C - Item No. 6 Master Cylinder lock MV... 24 ANNEX C - Item No. 7 Master Cylinder lock LV... 26 ANNEX D Stock Items... 28
PAGE 3 OF 28 FOREWORD Recoendations for corrections, additions or deletions should be addressed to the: Technology Services Manager City Power Johannesburg (Pty) Ltd P O Box 38766 Booysens 2016
PAGE 4 OF 28 INTRODUCTION To achieve standardisation and rationalisation for the securing and accessibly of City Power s electrical infrastructure, cylinder locks and colour coded padlocks shall be introduced. 1 SCOPE This specification covers City Power s requirements for colour coded padlocks, cylinder locks and keys. 2 NORMATIVE REFERENCES The following documents contain provisions that through reference in the text constitute requirements of this standard. At the time of publication the editions indicated were valid. All standards and specifications are subject to revision and parties to agreements based on this specification are encouraged to investigate the possibility of applying the most recent editions of the documents listed below. SABS 1533: SABS 155: Standard specification for padlocks. Resistance to salt fog of paint films (method). 3 DEFINITIONS For the purpose of this specification, the definitions of SABS 1533 shall apply. 4 PADLOCK 4.1 General 4.1.1 The padlock shall be suitable for master keying and have key-alike facilities. 4.1.2 The padlock shall have spring opening, self-locking shackles. 4.1.3 The key shall be removable in the unlocked position of the shackle. 4.1.4 The padlock shall have a low cost scrap value. 4.2 Type The padlock shall be Type CP, as per SABS 1533. 4.3 Category The padlock shall be category 2, as per SABS 1533.
PAGE 5 OF 28 4.2 Case 4.2.1 The case shall be either solid, laminated steel or formed. 4.2.2 The laminated steel shall have quality zinc plating where each laminate is 2 thick. 4.2.3 The case shall be covered with an ABS plastic, which shall be individually coloured, that is UV stable and weatherproof. 4.3 Colour The padlock case shall be colour coded as follows: PADLOCK COLOUR MARKING / FUNCTION A BLUE OPERATION B BLACK MEDIUM VOLTAGE C YELLOW LOW VOLTAGE D GREEN GENERAL E ORANGE METER READING 4.4 Shackle Table 1: Padlock colours and marking / function. 4.4.1 The shackle shall be 6 2 boron steel or case hardened chromium plated steel. 4.4.2 All steel shall be grade 303 stainless. 4.4.3 The surface of the shackles shall have been case-hardened to a Rockwell hardness in the range 695 HRC 20 to 739 HRC 30 and have been case-hardened to a depth of between 0, 25 and 0, 30. 4.5 Keys 4.5.1 500 (five hundred) keys shall be supplied once off for each series of padlock. The keys shall be compatible with existing keys in use by City Power. 4.5.2 The keys shall be constructed from high quality brass. 4.5.3 The key shall be a snake key way profile. 4.5.4 A supplier agreement shall be signed between City Power and the successful tenderer. 4.5.5 The key shall be clearly stamped alphabetically A to E, according to the level of access, A being the highest access level, as shown in Table 1. 4.5.6 The identification characters shall be at least 2,5 high. 4.5.7 The key shall be removable in the unlocked position of the shackle.
PAGE 6 OF 28 4.6 Keyway The keyway design shall be registered to City Power and City Power shall be allowed to provide the design to any manufacturer to duplicate should they so desire. The successful supplier shall not be allowed to supply the padlocks, keys or keyway design to anyone else except City Power for a period of not less than 25 years coencing from the first date of purchase. 4.7 Dimensions The dimensions include the ABS plastic cover and as shown in figure 2: 4.7.1 The nominal width of the padlock case, excluding the outer coloured casing, shall be 40. 4.7.2 The padlock shall have a nominal height of 40. 4.7.3 The nominal thickness of the padlock case shall be 23. 4.7.4 The nominal width across the shackle shall be at least 35. 4.7.5 The shackle length shall be 43, in the locked position. SHACKLE 6 43 CASE 40 WEATHERPROOF COVER KEYHOLE 4.8 Mechanisms Figure 2: Typical dimensions of a master padlock. 4.8.1 The padlock mechanism shall be of the pin tumbler cylinder type, with anti-pick mushrooms pins and security plates / pins. 4.8.2 The number of anti-pick mushroom pins shall not be less than four. 4.8.3 The number of anti-pick plates shall not be less than one. 4.8.4 The pin springs shall be made of phosphor bronze.
PAGE 7 OF 28 4.8.5 The mechanism shall be pre-lubricated with graphite paste. 5 MECHANICAL STRENGTH 5.1 The padlock shall comply with the mechanical tests outlined in SANS 1533. Section 6.2 - Tension test shall be carried out and City Power reserve the right to request a practical demonstration of the products ability to withstand the test. 5.2 The mechanism shall be of a robust construction and shall not be prone to mechanical breakage. 6 CYLINDER LOCK 6.1 Requirements The cylinder lock shall: 6.1.1 Manufactured out of solid brass; 6.1.2 Be suitable for master keying and have key-alike facilities; 6.1.3 Be supplied with 5 pin tumblers; 6.1.4 Be supplied with re-tailoring cylinder screws and fixing plate, and 6.1.5 The key shall be removable in the unlocked position of the cylinder.
PAGE 8 OF 28 6.2 Dimensions Ø 29.2 Ø 12.9 20.7 Ø 14 Ø 32 2 Front view Rear view 252 Tumbler pins 786 2.7 2 7 Side view Side view Figure 3: Typical dimensions of a cylinder lock.
PAGE 9 OF 28 7 MATRIX The below matrix illustrates the access level of the keys in relation to the coloured padlocks and cylinder locks. KEYS A B C D E PADLOCK BLUE BLACK YELLOW GREEN ORANGE Figure 4: Level of access 8 TESTS 8.1.1 The padlocks shall be type tested as per SABS 1533. 8.1.2 Test reports shall be provided. 8.1.3 Type tests shall be performed by an accredited laboratory. 9 MARKING, PACKING AND DOCUMENTATION 9.1 Marking Each padlock shall be clearly and indelibly marked with the following: a) Brand name or trade mark. b) City Power s name. c) Each coloured padlock shall be engraved as Operation, MV, LV, General or Meter reading as per Table 1.
PAGE 10 OF 28 d) The cylinder lock shall be clearly stamped alphabetically B or C, according to the level of access, A being the highest access level, as shown in figure 4. 9.2 Packing 9.2.1 The padlocks or cylinder locks shall be so packed, in acceptable containers, that they are adequately protected from damage during normal transit, and from deterioration due to dust, light and normal atmospheric moisture. 9.2.2 Preferably, the packaging to be colour coded as per the padlocks. 9.3 Documentation 9.3.1 Documentation shall be submitted in a technical catalogue format. 9.3.2 The technical catalogue shall specify the sizes, dimensions, reference numbers, and if applicable, the complete range of other products and accessories available. 9.4 Samples City Power reserve the right to request samples prior to purchase, or as part of the tender process. 10 QUALITY ASSURANCE A quality management system shall be set up in order to assure the quality of the master padlocks during development, production, and installation. Guidance on the requirements for a quality management system may be found in the following standards: SABS ISO 9000, SABS ISO 9001, SABS ISO 9002, SABS ISO 9003 and SABS ISO 9004. The details shall be subject to agreement between the purchaser and supplier.
PAGE 11 OF 28 ANNEX A - Bibliography SCSSCAAM8: Eskom specification for master locks and master keys for electrical and related equipment. CP 62/111: Locks.
PAGE 12 OF 28 ANNEX B - Revision information DATE REV. NO. NOTES March 2003 0 First issue Aug. 2005 1 Foreword: Updated new list of members Introduction: Added cylinder locks Scope: Added cylinder locks Clause 4: changed title to Padlocks Clause 4.4.1: Changed stainless to boron Clause 4.8.5: Removed silicon Added entire clause 5 Annex C added Items 6 and 7
PAGE 13 OF 28 Jan 2009 2 9.4 Samples City Power reserve the right to request samples prior to purchase, or as part of the tender process. 4.5.1 The keys shall be compatible with existing keys in use by City Power. 4.7.4 The nominal width across the shackle shall be at least 35 5 MECHANICAL STRENGTH 5.1 The padlock shall comply with the mechanical tests outlined in SANS 1533. Section 6.2 - Tension test shall be carried out and City Power reserve the right to request a practical demonstration of the products ability to withstand the test. 5.2 The mechanism shall be of a robust construction and shall not be prone to mechanical breakage. 9.1 c) Each coloured padlock shall be engraved as Operation, MV, LV, General or Meter reading as per Table 1.
CP_TSSPEC_069 0 PAGE 14 OF 28 ANNEX C - Item No. 1 Blue Master Padlock and Keys Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 4.7 Nominal size of the case: xxxx xxxx a) Width b) Thickness c) Height 3 4.1.1 Individually keyed? Yes/No Yes 4 4.2 Type of case xxxx 5 4.2.3 Waterproof padlock Yes/ No Yes 6 4.4 Type of shackle xxxx 7 4.5.2 Type of material for the key Brass 8 4.5.7 Keys removable in unlocked position? Yes/No Yes 9 8 Test certificates Yes/No Yes 10 9.1 Markings comply Yes/No Yes 40 23 40 Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 15 OF 28 Item No. 1 Blue Master Padlock and Keys Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 16 OF 28 ANNEX C - Item No. 2 Black Master Padlock and Keys Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 4.7 Nominal size of the case: xxxx xxxx d) Width e) Thickness f) Height 3 4.1.1 Individually keyed? Yes/No Yes 4 4.2 Type of case xxxx 5 4.2.3 Waterproof padlock Yes/ No Yes 6 4.4 Type of shackle xxxx 7 4.5.2 Type of material for the key Brass 8 4.5.7 Keys removable in unlocked position? Yes/No Yes 9 8 Test certificates Yes/No Yes 10 9.1 Markings comply Yes/No Yes 40 23 40 Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 17 OF 28 Item No. 2 Black Master Padlock and Keys Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 18 OF 28 ANNEX C - Item No. 3 Yellow Master Padlock and Keys Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 4.7 Nominal size of the case: xxxx xxxx g) Width h) Thickness i) Height 3 4.1.1 Individually keyed? Yes/No Yes 4 4.2 Type of case xxxx 5 4.2.3 Waterproof padlock Yes/ No Yes xxxx 6 4.4 Type of shackle xxxx 7 4.5.2 Type of material for the key Brass 8 4.5.7 Keys removable in unlocked position? Yes/No Yes 9 8 Test certificates Yes/No Yes 10 9.1 Markings comply Yes/No Yes 40 23 40 Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 19 OF 28 Item No. 3 Yellow Master Padlock and Keys Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 20 OF 28 ANNEX C - Item No. 4 Green Master Padlock and Keys Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 4.7 Nominal size of the case: xxxx xxxx j) Width k) Thickness l) Height 3 4.1.1 Individually keyed? Yes/No Yes 4 4.2 Type of case xxxx 5 4.2.3 Waterproof padlock Yes/ No Yes 6 4.4 Type of shackle xxxx 7 4.5.2 Type of material for the key Brass 8 4.5.7 Keys removable in unlocked position? Yes/No Yes 9 8 Test certificates Yes/No Yes 10 9.1 Markings comply Yes/No Yes 40 23 40 Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 21 OF 28 Item No. 4 Green Master Padlock and Keys Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 22 OF 28 ANNEX C - Item No. 5 Orange Master Padlock and Keys Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 4.7 Nominal size of the case: xxxx xxxx m) Width n) Thickness o) Height 3 4.1.1 Individually keyed? Yes/No Yes 4 4.2 Type of case xxxx 5 4.2.3 Waterproof padlock Yes/ No Yes xxxx 6 4.4 Type of shackle xxxx 7 4.5.2 Type of material for the key Brass 8 4.5.7 Keys removable in unlocked position? Yes/No Yes 9 8 Test certificates Yes/No Yes 10 9.1 Markings comply Yes/No Yes 40 23 40 Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 23 OF 28 Item No. 5 Orange Master Padlock and Keys Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 24 OF 28 ANNEX C - Item No. 6 Master Cylinder lock MV Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 6.2 Do the dimensions comply? Yes/ No Yes 3 6.1.2 Individually keyed? Yes/No Yes 4 6.1.1 Type of cylinder brass 5 6.1.5 6 6.1.4 Keys removable in unlocked position? Cylinder complete with fixing plate and screws? Yes/No Yes/ No 7 9.1 Do the markings comply? Yes/No Yes 8 9.2 Does the packaging comply? Yes/No Yes 9 9.3 Does the documentation comply? Yes/No Yes Yes Yes Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 25 OF 28 Item No. 6 Master Cylinder lock MV Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 26 OF 28 ANNEX C - Item No. 7 Master Cylinder lock LV Schedule A: Purchaser's specific requirements Schedule B: Guarantees and technical particulars of equipment offered Item Subclause of CP_TSSPEC_069 Description Schedule A Schedule B 1 Manufacturer xxxx 2 6.2 Do the dimensions comply? Yes/ No Yes 3 6.1.2 Individually keyed? Yes/No Yes 4 6.1.1 Type of cylinder brass 5 6.1.5 6 6.1.4 Keys removable in unlocked position? Cylinder complete with fixing plate and screws? Yes/No Yes/ No 7 9.1 Do the markings comply? Yes/No Yes 8 9.2 Does the packaging comply? Yes/No Yes 9 9.3 Does the documentation comply? Yes/No Yes Yes Yes Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 27 OF 28 Item No. 7 Master Cylinder lock LV Deviation schedule Any deviations offered to this specification shall be listed below with reasons for deviation. In addition, evidence shall be provided that the proposed deviation will at least be more costeffective than that specified by City Power. Item Subclause of CP_TSSPEC_069 Proposed deviation Tender Number: Tenderer s Authorised Signatory: Name in block letters Signature Full name of company:
PAGE 28 OF 28 ANNEX D Stock Items Material Group : GEN-GOOD Item SAP No. SAP Short Description SAP Long Description 1 511 PADLOCK OPER BLUE PADLOCK, OPERATING, MASTER, LAMINATED, WITH A BLUE PVC OUTER CASING, HAVING AN 6 MM DIAMETER SHACKLE. ITEM SPECIFICATION NO.CP_TSSPEC_069 2 512 PADLOCK MV BLACK PADLOCK, MEDIUM VOLTAGE, MASTER, LAMINATED, WITH A BLACK PVC OUTER CASING, HAVING AN 6 MM DIAMETER SHACKLE. ITEM SPECIFICATION NO.CP_TSSPEC_069 3 513 PADLOCK LV YELLOW PADLOCK, LOW VOLTAGE, MASTER, LAMINATED, WITH A YELLOW PVC OUTER CASING, HAVING AN 6 MM DIAMETER SHACKLE. ITEM SPECIFICATION NO.CP_TSSPEC_069 4 514 PADLOCK GENERAL GREEN PADLOCK, GENERAL, MASTER, LAMINATED, WITH A GREEN PVC OUTER CASING, HAVING A 6 MM DIAMETER SHACKLE. ITEM SPECIFICATION NO.CP_TSSPEC_069 5 515 PADLOCK MR ORANGE PADLOCK, METER READING, MASTER, LAMINATED, WITH AN ORANGE PVC OUTER CASING, HAVING A 6 MM DIAMETER SHACKLE. ITEM SPECIFICATION NO.CP_TSSPEC_069 6 1561 CYLINDER LOCK MV CYLINDER LOCK, MEDIUM VOLTAGE, MASTER, BRASS, COMPLETE WITH FIXING PLATE AND SCREWS. ITEM SPECIFICATION NO.CP_TSSPEC_069 7 1562 CYLINDER LOCK LV CYLINDER LOCK, MEDIUM VOLTAGE, MASTER, BRASS, COMPLETE WITH FIXING PLATE AND SCREWS. ITEM SPECIFICATION NO.CP_TSSPEC_069