Anleitung Multiroom erinrichtung GigaBlue Multiroon Server System GigaBlue Multiroom Configuration
GIGABLUE MULTIROOM KONFIGURATION All television and radio programs are distributed by the GigaBlue server operating over the home network to the client (via TS over UDP, IPv6), even HDTV and Pay TV (also at the same time from different transponders *) are available in every room, both for the as a multi-room server operating GigaBlue and for the NetClients in the various zones. Through the Quatro system optimum adaptability is given to individual needs. The GigaBlue server system means Pay TV users a monetary benefit: The Multiple transponder decoding can be used at same time two complete pay-tv transponder with a single smart card - of course, on the NetClients in the various zones. There are always decrypts all the channels of the two in use Pay TV transponder and provided for all connected stations, so you can use up to six pay TV channels simultaneously. This chapter describes how to configure the Gigablue for the server operating with the Gigablue client.
GIGABLUE MultiRoom-System AT A GLANCE Client 1 Network LAN or wifi Client 2 Network LAN or wifi
GigaBlue Multiroom Configuration Please install the Remote Channel stream of the converter Gigablue Server to the client Gigablue box. to please 2x Green button on the remote control wait until the server is as, after that Extensions/remotechannelstremconverter select and install After installation please select the Client Box Menu / Settings / Channel Scan / Import External bouquets and yellow button (see Picture 2 and 3) Please now enter from the main box Gigablue the IP address in the client box and green button (See Picture 4) Picture 2 Picture 3 Picture 4 Picture 5 Now please from the Bouquet List Select Bouquets by pressing the OK Button in the Clientbox want to stream, or you can with the blue button to select all then press green button (See Picture 5 Picture 6 Picture 7 Bouquets now been added to the favorites list Please open channel list and press You see blue button in the Favorites list to the Name starting remote Now you can Channels Select and enjoy TV without antenna See Picture 6 and 7
GigaBlue the Network GigaBlue can create kommikation with your PC, laptop, smartphone, tablet PC, router, network drives, and many other electronic devices and exchange data
GigaBlue Networkbrowser Using the network browser, you can use the menu and the remote NFS and CIFS shares from external devices which mount are via Ethernet (eg. NAS or PC or even a different GigaBluebox) in your own network for disposal. Man can thus play from external devices audio, video, images, and other files on the Gigablue and use external devices as a hard disk. Requirements A functioning network Devices with an NFS or CIFS share Handling the Remote Control Installation: Where can I find the plugin after installation? -Menü -Settings -System -Network... Selection of WiFi or LAN-Network Here we see two new entries (network browser and the release manager)netzwerk search Add Share The device where the release is to be mounted select with OK Now comes query YES or NO If there is a CIFS share, confirm with Yes. Confirm NFS with No. Here is also displayed if there is an I CIFS or NFS share, and whether shares are already connected by this device. Now we mark the desired release and confirm with OK
GigaBlue Networkbrowser Configuration Active = on - Here you can activate the mount on or off local share name = This is the name that appears under the then Mount on the box Release Type = Is already really in this case (for a CIFS mount will automatically here CIFS stand) Server IP is = ok so server enable = is also ok so sharing options = Here you additional option to specify rw - stands for a mount with Lese-/Schreib-Rechten, nolock - NFL locking is turned off. This must be used with some old NFS servers that do not support locking.}} OK, we now turn on the Mount a release Release Manager Add Network Share - Here, you can manually add -Shares manage - Here you can check the status of their mounts, and also delete Mounts again -User Management - This is where the user data for the CIFS shares to be created -Change network name - Here you can the name with which the box appears in your Network change You can search for the configuration via video button External devices and can play the desired files. If you want to record, you can record over to Record button on the external devices. Here in picture External and Internal players Here is a picture of Nas device.
Overview of our advantages... Worldwide uncomplicated and fast after sales service reach us by phone or email technically support and development by own engineers production and functional tests before sale successfully for years in this business to become a distributor, please contact us sales@gigabluebox.de technical questions - use our mail adress service@gigabluebox.de