Model RWS-Evolution The RWS-Evolution is the high end floor toroidal winding from RUFF. The new controller with innovative programming is user friendly and through the high resolution touch screen display it is simple to understand. Programs are saved in CSV-Format. Therefore, programs can be made externely by Excel. The Windows system allows own data management saved onto USB-Stick, or onto the CF-Card in a seperate file on the machine. A central program management at an external PC (Server) is possible via Ethernet connection. Easy file structure can be created and every program can be reported with a text description. The machine can also be remote controlled by Ftp- connection. Teleservice by our technicians via internet connection (Ftpconnection) for trouble shooting in the logic program. Update of PLCand visual display software via USB-Stick, datas can be sent via E-mail. operating panel 8 touchpanel with 4 function buttons memory Compact Flash 64MB - 2GB system Windows CE 5.0 language Unitext (all characters) interface USB-connention, ethernet-interface, 1x10/ Mbit, RJ, PS/2 interface, serial interface PCI modul card MC-CAN Dual Can Controller, hand control unit with 3 additional function buttons Models RWS-Global-Shuttle / RWS-Evo-Shuttle The s in Shuttle-Version have a slide system for the s. It enables to move the s out of the winding area for a comfortable load and unload the machine with toroidal cores (e.g. with a crane). This system brings especially for very large or very heavy cores crucial advantages. RWS-Global-Shuttle controller language 5.7 monochrom touchpanel with 2 function buttons (start/stop) all latin characters motor with inverter stepper motor or RWS-Global-Shuttle operating panel 8 touchpanel with 4 function buttons memory Compact Flash 64MB - 2GB system Windows CE 5.0 language Unitext (all characters) interface USB-connention, ethernet-interface, 1x10/ Mbit, RJ, PS/2 interface, serial interface PCI modul card MC-CAN Dual Can Controller, hand control unit with 3 additional function buttons
Stand alone taping station to be combined with toroidal winding machines for double head applications - Model RWS-Tape RUFF has designed a low cost standardised taping station in order to replace the oneway special and expensive double head machine. It is a flexible taping system that can be placed next to existing toroidal winding machines and therefore enables simultaneous winding and taping of transformers in the most economical method. The head is mounted on a ground plate which sits on sliding rails and enables to slide the head easily into the core. It incorporates the RUFF modular system and can be equipped with interchangeable heads. One or more working stations can be combined with a winding machine. controller taping speed core drive drive supply voltages machine size machine weight integral with 1 electronic counter up to 1 rpm not required as the core drive is given from toroidal winding machines which is placed next to electronic controlled 3-phase motor 1,5 kw 2, 110, 0 V / Hz / AC / 16 A 1 x 0 mm 1 kg net, 0 kg gross Simultaneous taping and winding operation
Gear rack s for the FLOOR models The gear rack s are designed for precision layer winding with low build up factors. Typical applications are the production of variacs, potentiometers and heavy transformer windings. All the s work with a robust gear rack and drive train gear system, this allows the to generate a large amount of torque which makes it suitable for large wire size. The wire is de-reeled from the winding magazine via two guide rollers as it is layered on the core, the magazine itself is held back under constant tension via the braking system which is adjustable to suit each wire size. All gear rack s can utilise two designs of magazines: the KN type has a quick opening facility and the SN type which has a completely removeable section for taller cores. A range of narrow racks and multifilar wire guides can be supplied for reduced core I.D. s and strip winding. Customised components for special applications can be supplied upon request. data RW RW 44-1 RW 44-1V RW RW -V RW -0 RW -EH mm inch/awg mm inch/awg mm inch/awg mm inch/awg mm inch/awg mm inch/awg mm inch/awg wire range 0,4-2,5 10-0,4-3,0 8½- 0,4-3, 7-0,5-2, 9½- 0,4-3, 7-0,5-2, 9½- 0,4-4,5 5½- magazine diameter 0 8,66 0 13, 0 13, 4,29 4,29 4,29 4,29 finished core OD -0 2,- -0 3,54- -0 4- - 3,54-110 - 4-110 - 3,54-110 - finished core ID 10-1, 1, 1,57 1, 1,57 1, finished core height 3,94 1 6,7 1 6,7 2 9,84 2 9,84 0,96 2 9,84 max. winding speed rpm 1 1 compatible s RW 3 RW 3 RW 3 SO SR SO S1 S2 SR SO S1 S2 SR SO S1 S2 SR compatible m/c bases all RWS machine series all RWS machine series all RWS machine series all RWS machine series all RWS machine series all RWS machine series all RWS machine series 4-110 Magazine data base with wire length in meters: for wire length in feet, multiply by factor 3, Magazine type / 44/ 1 1 / 1 1 final hole diameter final hole by biggest height mm inch mm inch 1 1 0 1 1 0 0,98 1,10 1, 1, 1, 1,57 1,81 1,89 2, 2,56 3,03 3,2 1, 1, 1, 1, 2,36 2,56 2, 3, 3,54 4,72 5, 6, 7,88 1, 1, 1, 2,36 2,56 2, 3, 3,54 4,72 5, 6, 7,88 53 57 68 78 98 1 1 1 0 57 78 83 95 103 1 1 185 5 1, 1, 1, 1,69 2,05 2,09 2, 2, 2,56 2,95 3, 3,9 1,8 1,9 2,1 2,44 2,68 2,87 3,07 3,54 3, 5, 5,91 7,09 8, 2,04 2, 2, 2,87 3,07 3, 3,74 4,05 5, 6,10 7, 8, 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1, 1, 1,32 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2, 2, 2,36 2,5 2, 2,8 3,0 3, 3, 3, 3,66 4,0 4,5 mm ½ 18 16½ 16 ½ ½ 13½ 13 ½ 11½ 11 10½ 10 9½ 9 8½ 8 7½ 7 6½ 5½ AWG 106 181 0 294 4 9 6 3 844 11 82 293 5 661 8 10 16 8184 9936 6 9 10 85 3672 72 106 1 69 118 1 1 3 6 5 7 5 7 1029 10 1 3 4 4 685 856 969 10 16 53 64 410 3 3 993 11 57 61 79 99 83 1 3 0 4 3 5 6 7 10 1 0 2 9 1 0 6 2 18 41 2 7 564 6 8 9 1679 07 78 66 1 6 6 2 2 2 5 4 4 0 2 0 7 4 6 8 1 10 3299 8 9 8 7 6 716 10 95 84 48 111 1 164 185 2 3 4 6 1 5 2 7 7 4 5 668 8 3 3 1 3 571 8 968 14 38 94 61 91 92 1 7 6 0 3 4 61 1 8 0 4 2 4 5 0 9 10 1 0 8 9 3 2 6 8 10 07 18 106 4 7 1 0 74 113 1 1 2 2 3 4 5 0 11 11 107 163 0 1 3 369 9 9 8 11 64 63 85 96 116 8 6 3 118 1 1 5 293 8 6 6 11 1366 87 1 1 0 1 2 4 4 6 4 1678 78 56 57 104 1 4 2 36 1 6 2 2 3 0 911 1106 74 111 1 169 1 0 3 8 569 2 18 44 84 1 7 2 29 67 1 1 3 3 0 7 818 993 1 1 189 2 8 366 3 8 10 18,5,5 102 1 3 59 94 1 1 1 6 0 416 7 8 85 110 136 169 2 5 3 5 7 1089 14 54 1 182 66 82 102 116 8 2 364 6 6 74 95 118 7 168 0 7 7 4 953 11 29 109 1 103 7 4 2 3 564 685 84 1 9 3 2 3 3 841 992 18,5 1 64 91 1 1 6 6 1 9 93 116 132 188 2 298 3 7 882 16 63 1 36 57 72 79 1 1 184 6 4 5 66 82 104 1 169 1 6 361 669 789,5 41 56 78 1 32 1 2 4 4 94 1 181 0 3 3 711 13 18 29 66 95 1 1 8 364 4 53 68 84 95 1 1 2 293 5 6 11 16 63 85 101 1 1 3 5 87 1 6 2 2 6 5 10 41 56 53 292 5 54 68 110 1 4 2 6 4 9 13 69 81 108 1 3 3 69 1 6 2 3 3 8 11 18 32 1 6 7 89 1 1 2 4 11 16 1 6 79 94 1 3 3 3 9,5 107 188 9 84 111 1 2 3 8,5 13 67 93 164 9 61 96 1 4 8 11 61 85 1 182 56 67 88 1 3 3 10 13,8 41 54 132 161 59 78 109 6 2 36 67 118 1 44 69 5 7 10 13 63 88 9 187 1 1 1 1
Gear rack taping heads for the FLOOR models These taping heads work with a gear rack system similar to the gear rack winding heads but vary in one major way. That is as the tape is loaded on the tape magazine it is also taped on to the core. A flat leather belt round the outside of the tape magazine controls the taping tension and is infinitely variable. The tape is automatically cut when the correct length of tape is loaded as is the complete operation. Customised components for special applications can be supplied upon request. taping head data RW /B RW 44/1B RW /B RW -B-0 RW /B-U RW -0/B-U mm inch/awg mm inch/awg mm inch/awg mm inch/awg mm inch / AWG tape widths 9-0,4-0,787 9-0,4-0,984 9-0,4-0,984 2-0,4-0,984 9-0,4-0,984 build up factor + +0,787 + +0,984 + +0,984 + +0,984 Ø Bandrolle (max 0 mm) magazine diameter 0 8,66 0 13, 4,29 4,29 finished core OD -0 2,- -0 3,54- - 3,54-110 - 3,54-110 - 3,54-110 finished core ID 29 1,44 1, 1, 1, Ø Bandrolle (max 0 mm) finished core height 3,94 1 6,69 2 9,8 0,96 2/0 9,8/,96 max. taping speed rpm 1 1 compatible s RW 3, RW 3 -SO -SO S1 S2 SR -SO S1 S2 SR SO S1 S2 SR compatible m/c bases all RWS machine series all RWS machine series all RWS machine series all RWS machine series all RWS machine series Combination possibilities between s and s finished core OD range RW RW /B RW 44-1 RW 44/1B RW 44-1V RW 3 Ø RW 3 Ø RW 3 Ø Ø Ø Ø -S1 -S2 S-13 (with extra horizontal rollers for heavy cores) inch 3,-,0 3,-,0 4,-,0 4,-,0 4,92-,0 mm -0-0 110-0 110-0 1-0 inch 2,-,0 2,-,0 4,0-13,0 4,0-13,0 4,53-13,0 mm -0-0 -3-3 -3 inch 3,54-11,8 3,54-11,8 4,0-11,8 mm -0-0 -0 RW RW -V RW -0 RW -EH inch 4,0-,0 4,0-,0 5,-,0 5,-,0 5,-,0 5,-,0 5,-,0 5,-,0 mm -0-0 1-0 1-0 1-0 1-0 1-0 1-0 inch 3,-13,0 3,-13,0 4,72-13,0 4,72-13,0 5,-,0 4,72-13,0 4,72-13,0 4,72-13,0 4,72-13,0 mm 85-3 85-3 -3-3 1-3 -3-3 -3-3 inch 4,92-,0 3,54-,0 4,0-,0 mm 1-0 -0-0 inch 4,-,7 4,-,7 4,-,7 4,-,7 4,-,7 4,-,7 mm 110-0 110-0 110-0 110-0 110-0 110-0 inch 9,84-, 9,84-, 9,84-, 9,84-, mm 2-0 2-0 2-0 2-0 inch 4,0-,7 4,0-,7 4,0-,7 4,0-,7 4,0-,7 4,0-,7 4,0-,7 mm -0-0 -0-0 -0-0 -0 inch 3,94-32 3,94-32 4,0-,7 4,72-32 mm -0-0 -0-0 inch 3,94-,3 3,94-,3 3,94-,3 4,72-,3 mm -0-0 -0-0 finished core ID range RW RW /B RW 44-1 RW 44/1B RW 44-1V RW RW -V RW -0 RW -EH SR inch 16,7 16,7 16,7 16,7 mm 0 0 0 0
Standard core transport rollers for s for type A Ø mm B Ø mm C Ø mm D Ø mm RW 3 RW 3 RW 3 1 RW 3 1 1 1 1 1 0 1 0 1 1 1 0 1 0 1 1 1 0 1 0 SR 1 SR 1 1 SR 0 SR 1 0 B A Ø C Ø D Ø Tapered core transport rollers for s for type A Ø mm B Ø mm C Ø mm D Ø mm RW3 RW3 1 167 1 167 RW444 RW444 1 167 RW444-P RW444-P 1 167 RW444-PSR RW444-PSR 1 167 B D Ø C Ø A Ø
kleine Spulen mit Feindraht small coils with fine wire + magazine 6,7 x 6,7 x 4,8 x 0, 7,3 x 1,9 x 5,3 RW 111- (F.B.) RW - + 1,6 7 x 3,2 x 3 1 x 0,08 bifilar 7,4 x 2,3 x 3,6 RW 111- (R.B.) RW - + 1,6 6,2 x 4,4 x 5,3 1 x 0,08 trifilar 7,4 x 2,3 x 3,6 RW 111- (R.B.) RW - + 1,8 6,6 x 3 x 2,9 1 layer x 0,1 bifilar 7,2 x 2,5 x 3,5 RW 111- (R.B.) RW - + 1,8 8 x 3, x 3,7 x 0, 9,1 x 2,7 x 4,5 RW 111- (F.B.) RW - + 2,0 10,5 x 4 x 4,8 0 x 0,1 bifilar 11,2 x 3,1 x 5,5 RW 111- (R.B.) RW - + 2,0 kleine Spulen mit Feindraht small coils with fine wire + magazine 9,5 x 4,8 x 3, 2 61 x 0,18 x x 0,3 1 0,8 x 2,9 x 4, 6 RW 111- (F.B.) RW - + 2,0 13,5 x 7,8 x 2, 8 5 x 0,1,5 x 5,5 x 4 RW 111- (S.S.) RW - + 4,5 16 x 4 x 8 1 layer x 0,1 16,5 x 2,9 x 9 RW 111 (I.S.) RW 10 + 2,0 16 x 8,5 x 6 0 x 0,3 18 x 5 x 8,9 RW 111 (F.B.) RW -C + 2,5 x 6 x 4, 5 x 0,4 13 x 4,3 x 5,5 RW 111 (F.B.) RW -C + 2,0,5 x 9 x 5, 5 x 0,5 bifilar 16 x 7 x 7 RW 111-V RW + 3,0 kleine Drossel und Filter mit dickem Draht small chokes and filters with heavy wire + magazine 13 x 7,7 x 8,5 x 0,8 16,8 x 4,2 x 10,5 RW 111-V RW + 3,0 x 13 x 7 x 1,6,5 x 8,5 x 11, 5 RW 0-V + 4,7,5 x,5 x 6,5 x 1, x 6 x 11,5 RW 0-V + 4,2,5 x,8 x 8,2 2 layer x 0,8,5 x x 11 RW 2-L RW 1 + 1/11 x x 11 x 1,32 trifilar 44 x x 18 RW 2-L RW 2 + 2/13 x,5 x 11,5 x 1,0 x 9 x 18 RW 0-V + 6,3 kleine Drossel und Filter mit dickem Draht small chokes and filters with heavy wire + magazine x x 18,4 1 x 1,2 bank wound x 9 x RW 2-VSO RW 0-V + 8,2,2 x x 16,4 3 sectors each 11 x 1,8 x x RW 0-VS + 7,4 4 x 2,0 x 1,6 36 x 0,1 bifilar RW -D-RO RW 111-D x x 18,4 95 x 1, 8 x 10 x 29 RW 2-VSO RW 0-V + 8.2 53 x x 18 each sec.with 3 layers with bank wound x1,8 x 16 x RW 2-VSO RW 0-V + 9 x x,5 32 x 2,5 x x,5 RW 2-SO RW 3-V + 3/ stromkompensierte Drossel balancing chokes + magazine,5 x 8 x 6 each sector x 0,3 16,1 x 7,2 x 6,5 RW 111-V (F.B.) RW -C + 2,5 13,5 x 6 x 5,5 each sector x 0,5 x 5 x 7 RW 111-V (F.B.) RW -C + 2,5 x 9 x 10 each sector x 0,4 x 8 x RW 111-V RW -C + 4,0 x x 8 each sector x 0,8 x 10 x 11 RW 0-V + 4,7 x x 10 each sector 9 x 1,4 x 10,5 x RW 0-V + 5,1,5 x x each sector 68 x 0,9 x 8,5 x RW 0 + 5,0 kleine Sonderspulen small coils special + magazine 13 x 7,5 x 5 7 x 0,5 litz wire,3 x 6 x 6,6 RW 111-V RW + 3,0,6 x 6,5 x x 0,16 RW 111-V (R.B.) RW -C + 2.0 16,5 x 7 x,5 1 sector x 0, RW 111-V (F.B.) RW -C + 2,5 x 7 x 18,5 each sector x 0,3 18 x 6 x,5 RW 111-V (F.B.) RW -C + 2,5 18 x 16 x 2,8 1 layer x 0, precision wound 18,8 x,6 x 3,5 RW 2-L RW 0 + 10,0 x,8 x 4 each sec. 1 layer prec. wound x 0,1,5 x,9 x 4,4 Segment holder RW 0 + 10,0 Netztrafos power transformers + magazine 5 x x,5 primary 3 layers x 0,9 1 x x RW 2-VSO RW + /1 6 x x 68 secondary 3 layers x 1,32 1 x x 74 RW 2 RW 4 + 4/ x x primary progressive/ wound x 0,3 x,5 x RW 2-VL RW + 81 x 44 x primary 10 x 0,5 83 x x RW 2-VL RW + 84 x x secondary x 1,32 87 x 36 x RW 2-VL RW 0 + 10/K sample of power transformer View or primary winding interlayer taping with copper foil and secondary winding F.L. = Flat belt, R.B. = Round belt, S.S.= Side slider, I.S. = Inside slider
How to find your ideal machine Step 1 Select the suitable machine line: RUFF offers four different machine lines and each machine line is extremely flexible with it s own head and table changing system. Following graphic enables you to select the suitable machine line for your application. Please check wire range and core OD range. machine line wire Ø 0,05-1,0 mm 10 heads core OD 3,0 - mm 5 tables BENCH machine line wire Ø 0,05-2,8 mm heads core OD 5-0 mm 6 tables FLOOR machine line wire Ø 0,4-4,5 mm heads core OD - mm 9 tables HEAVY machine line wire Ø 0,8-6,0 mm 3 heads core OD - mm 4 tables Step 2 Select the suitable machine model: RUFF offers different machine families. Following overview of models enable you to select your machine. Please check the characteristics: Basic family Global family Evolution family machine line 1 model -Basic BENCH machine line 3 models -Basic -Global -Evolution FLOOR machine line 2 models RWS-Global RWS-Global-Shuttle RWS-Evolution RWS-Evo-Shuttle HEAVY machine line 1 model RW -Evolution RW -Evo-Shuttle drives s with stepper motor s with servo motor s with servo motor s with motor and inverter controller N.C. SIAX 110L N.C. SIAX monochrom touch screen display LCD-Display 5.7 monochrom touch screen programming simple programming, user friendly controller simple programming, user friendly controller with touch screen monitor s with servo motor s with servo motor N.C. IPC EL8 touch screen N.C. IPC EL8 touch screen 8 touchpanel with 4 funktion buttons, USB-connention, ethernet interface, PS/2 interface, RJ, serial interface language, unitext (all characters e.g. Cyrillic etc.) programming for sophisiticated winding applications with industry-pc controller; clear text touch screen with graphical display and automatically winding program calculation applications all standard winding jobs all standard winding jobs all standard jobs and special resp. hi tech winding applications 6
Step 3 Select the suitable. Following is an overview of available s. Please compare your winding application with the technical specification of the heads in the RUFF product catalogue: machine line wire 0,05-1,0 mm 10 heads, 5 tables direct, multisystem and miniature s RW -D direct RW - miniature RW - miniature RW - miniature RW - multisystem RW - multisystem RW 0- multisystem BENCH machine line wire 0,05-2,8 mm heads, 6 tables gear rack heads RW 0 RW 1 RW 2 RW 3 RW 4 RW 4-V slider heads RW 10 RW RW RW RW RW -V belt heads RW -C RW -C RW RW 0 RW 0-V RW 0 taping heads RW 0/B RW 1/B RW 2/B RW 3/B RW 4/B RW 0/B RW 0/B FLOOR machine line wire 0,4-4,5 mm heads, 9 tables gear rack heads RW RW 44-1 RW 44-1V RW RW -V RW -0 RW -EH taping heads RW /B RW 44/1B RW /B RW -0/BU HEAVY machine line gear and taping rack heads wire 0,8-6,0 mm 3 heads, 4 tables RW RW /B RW /BU 7