Product Guide 2012/13. Vehicle Servicing Equipment. autoclimate

Product Guide 2012/13 Vehicle Servicing Equipment TM autoclimate

AC788PRO - Designed with the Hybrid vehicle in mind 2

Contents About Autoclimate 5 HFO-1234yf A new refrigerant on the horizon 6 Robinair AC1234 machines 7 R134a - In demand 10 Refrigerant Management Stations 12 Refrigerant Management Station Comparison Chart 16 Leak Detection 18 Induction Heating 20 Diagnostics 22 Coolant Exchange 28 Anti-Bacterial Cleaning 31 Products 33 Trading Terms & Conditions 66 Disclaimer The contents of this publication are correct at time of publication. Autoclimate Limited reserves the right to vary, modify or change any of its products, services or specifications including those described or referred to in this publication at any time without prior notice. 2012 Autoclimate Limited Document ref: PGVSE0811 v1.0

Introducing Autoclimate About Autoclimate Established 1984 80+ employees. A successful partnership with the motor industry The UK s number 1 air conditioning specialist. Over 25 years of experience. Unique depth of knowledge and a high standard of service. Autoclimate offer equipment, tools, consumables and aftersales support. A first class reputation for both quality and innovation. Approved, recommended or recognised as a supplier by 97% of vehicle manufacturers. Customer base includes franchised dealers, accident repair centres, independent garages, fleet workshops and fast fit operations. Focus Sole UK distributor of Robinair refrigerant management stations. Largest UK automotive aftermarket distributor of R134a. 25,000 sq.ft warehouse to support a fast and effective delivery service. More than 4,000 customers globally. Largest supplier of OE lighting in the UK. Main UK manufacturer of front end auxiliary drive mount kits Registered over 5,000 technicians with City & Guilds for refrigerant handling assessments. Handle approximately 40,000 repair estimates per month. Autoclimate Main Office Autoclimate Ltd Head Office & Development Centre 37 Atcham Business Park Shrewsbury, Shropshire SY4 4UG We strive to develop and maintain long term relationships with our customers. Tel: 0345 50 50 900 Fax: 0345 50 50 901 Provide effective, high quality products. Call Options Department Provide comprehensive aftersales support. 1 Sales Flexible and adaptable approach combined with a deep rooted base of experience and 2 Service expertise. 3 Technical support Understand each customer s precise requirements. 4 Training 5 Engineering customer services Have strong working relationships with government bodies, trade bodies, vehicle and equipment manufacturers and other legislative bodies. Deliver the best workshop equipment solutions today and to prepare and meet the challenges of the future. 4 www.autoclimate.com 0345 505 0900 5

HFO-1234yf A new refrigerant on the horizon The introduction of HFO-1234yf is a very significant development in automotive air conditioning. However, it is important to appreciate that the new refrigerant will only have Production Vehicles (categories M1 and N1) receiving type approval from January 1st 2011 must use a refrigerant with a GWP (Global Warming Potential) of less than 150. The current refrigerant HFC R-134a does not meet this requirement. However, due to manufacturing issues the MAC Directive has been suspended until the end of 2012. All new vehicles (all categories) produced from January 1st 2017 must use a refrigerant with a GWP of less than 150. FAQ s Q. We are a franchise dealer. If a vehicle with HFO-1234yf experiences an A/C fault, what should we do if we have yet to purchase a suitable A/C machine? A. Please ask the vehicle manufacturer for their advice and also contact us for the latest technical information. With more vehicle manufacturer relationships and approvals than any other UK-based RMS supplier, Autoclimate is actively supporting the introduction of HFO-1234yf. vehicle with HFO-1234yf? A. As things stand, we believe that the chances of you seeing such a vehicle during 2012 and 2013 are low, given the number of known model introductions. Our advice is, that given that both the gas and a compatible A/C machine will be required; such repairs should be managed in cooperation with the appropriate franchise dealer, although if required we can supply a suitable a/c machine. limited impact during 2012 and well into 2013. By the end of 2012, it is estimated that fewer than 10 vehicle model types will have HFO-1234yf and to begin with its availability will be restricted to VMs (Vehicle Manufacturers) - hence its impact outside the franchise sector is most likely to be minimal. The initial global production of HFO-1234yf will only be sufficient to supply VMs production requirements. Further production is scheduled to come on stream during 2015. About HFO-1234yf Developed and manufactured jointly by DuPont and Honeywell Has a Global Warming Potential (GWP) of just 4, the maximum is 150 Q. I am an accident repairer. What if I have to repair a European consolidated number of new vehicles introduction with 1234yf air conditioning systems (in millions) Given the company s unique standing in the UK A/C servicing The performance characteristics are very similar to HFC market Autoclimate is maintaining close contact with the R-134a VMs in order to exchange information about the latest developments. Classed as a flammable refrigerant, albeit mildly. HFC R-134a is not flammable Lifespan if released to atmosphere is 11 days. HFC R-134a is 13 years The price will be higher than that of HFC R-134a, at least (Estimated data) initially 6 www.autoclimate.com 0345 505 0900 7

AC1234yf MACHINES A CHOICE OF AIR CONDITIONING MACHINES BUILT BY A WORLD LEADING MANUFACTURER SUPPLIED BY THE UK S RECOGNISED SPECIALIST.. Approvals Developed in conjunction with car manufacturers, these unit s meet the highest standards in performance, safety and efficiency. This ensures that HFO-1234yf based air conditioning systems are serviced in the most efficient, safest and most reliable way possible, giving you peace of mind. The German VDA, one of the most recognised and well respected associations in the global automotive industry commissioned the evaluation of the Robinair AC1234 machines through TUV Rheinland. The VDA s approval is an important purchase requirement for many VMs. Both the AC1234-7 and AC1234-8 have received VDA and TUV approval.* *When a refrigerant identifier is fitted Why choose Stand-alone over a Bi-Gas or converted unit? A Bi-Gas unit cannot be compliant with SAE J2843 or meet VM requirements and specifications, along with serviceability issues (when one circuit is damaged the other becomes inoperable) we strongly recommend our customers against the purchase of a Bi-Gas unit. Converted units Whilst an update kit may also look attractive to perspective buyers, we feel that it is unnecessary because workshops will require a stand-alone R134a machine for a long time yet. It is estimated that 60% of the vehicle market will still contain R134a in 2019. The cost of the update kit is also expected to be approximately 800, an additional expense which can be avoided. The burning question will be: When do I update my unit as R134a is still my most frequent gas used in servicing? Deep Recovery System SAE J8243 states that refrigerant management stations working on HFO-1234yf should recover at least 95% of refrigerant from the system. The Robinair AC1234 stations, and their Deep Recovery System, will recover 99% of refrigerant from the system. See page 34 for more detail

It is estimated that 20 million vehicles in the UK will have an R134a A/C system in 2019 R134a - In demand The hot topic Most conversations and literature involving vehicle air conditioning now include the topic of HFO-1234yf, the new refrigerant for automotive air conditioning. It will be a very slow and gradual process before workshops see these vehicles in any significant numbers and the importance of R134a and its continued servicing should not be overlooked. Remember that it is only those new vehicles that have a new type approval that have to use HFO-1234yf so the vast majority of vehicles coming off production lines will have R134a systems for the next few years at least and it is not until January 1st 2017 when all new vehicles have to be produced using HFO-1234yf. R134a the dominant refrigerant The initial global production of HFO- 1234yf will only be sufficient to supply VMs production requirements. Further production, when it will become available on-mass to the wider market is not scheduled until 2015 so R134a has a big part to play in your workshop service offering. There is currently no legislation or proposal for vehicles produced with R134a based A/C systems to be It is estimated that 20 million vehicles in the UK will have an R134a A/C system in 2019 switched over to HFO-1234yf and no legislation will stop a repairer or service centre from working on an R134a vehicle. With the average vehicle life currently at 9 years old, this represents a big opportunity to increase revenue streams into the workshop for a long time yet Minimum 99.9% pure R134a from Autoclimate 2019 Car Parc 61.2% 38.8% R134a HFO- 1234yf The purest refrigerant Autoclimate buys refrigerant from Mexichem and Harp, the biggest manufacturer of R134a. Customers are guaranteed the highest quality every time and Autoclimate always carry stock. Harp analyse any refrigerant before despatch and all filled cylinders are batch approved to the highest quality specification. When purchasing R134a from Autoclimate, you are guaranteed quality, pure refrigerant, every time. No hidden costs Since July 2007, refrigerant manufacturers have not legally been allowed to fill disposable cylinders for At a glance sale in the EU. The use of refillable cylinders however has not and does not affect the price to Autoclimate end users. There are no rental charges on cylinders, no deposits, no delivery charge and no collection charges for the empty cylinder what you are quoted is the price you pay. 13.6kg returnable cylinder ½ ACME fitting Bottle adapter can be supplied Free of charge for first time buyers 99.9% purity guaranteed No deposits or surcharges No rental charges Delivery and collection of the empty cylinder is free of charge See page 51 for more detail

Refrigerant Management Stations Quicker and more powerful than ever before AC788PRO - Designed with the Hybrid vehicle in mind Two circuits The AC788PRO has two independent oil circuits. Keeping the lubricants separate enables the machine to service vehicles with conventional internal combustion engines and hybrid or electric vehicles. With an increasing number of alternative powered vehicles being introduced, the AC788PRO has the flexibility and capability to give long service life in the workshop. Research data suggests that at least 60% of vehicles in circulation in 2019 will have an R134a system. Quick, easy & automatic The AC788PRO is a powerful, easyto-use refrigerant management station. It automatically controls the recovery, vacuum and recharging processes for oil, UV dye and refrigerant as well as filtering the recovered refrigerant. The operator only needs to identify the vehicle from the 4,000+ vehicle database, connect the hoses and the AC788PRO will do the rest, freeing up valuable time to attend to other work. Deep Recovery System - recovering 99% of refrigerant The Robinair A788PRO with its unique Deep Recovery System will recover 99% of refrigerant from the system. During the deep recovery process, specially designed solenoids will activate, which will aid recovery, guaranteeing more refrigerant is recovered than before. By controlling the pressure in the accumulator, a higher recovery percentage is achieved from the vehicle compared to other machines. Large Colour display & Windows CE The new TFT display makes it easier to see the progress of each stage of the service. Through insertion of an SD card (optional), operator training videos can offer simple step by step guides to individual stages of the servicing process. See page 35 for more detail

4,000+ Vehicle database AC690PRO - Less than five minutes per job Quick, easy & automatic The AC690PRO is a powerful, easy-to use refrigerant management station. It automatically controls the recovery, recycling, vacuum and recharging processes for oil, UV dye and refrigerant. A large fan cooled condenser, modern solenoid technology and patented oil separator delivers both high performance and excellent operational reliability. The operator only needs to identify the vehicle from the 4,000+ vehicle database connect the hoses and the AC690PRO will do the rest freeing up valuable time to attend to other work Accurate fault-finding With the AC690PRO, there is no need to invest in costly, stand-alone A/C diagnostic equipment. The RMS has a built-in vehicle specific diagnostic programme which measures key temperatures and pressures and reports possible faults and rectifications required. Customers can be reassured that not only has their vehicle s A/C system been fully serviced but also thoroughly checked for any faults that may need attention. Integral printer It is easy to produce a record of each A/C service using the AC690PRO s built-in printer. With the option of including company address details, the output shows the vehicle identity, date and time of the service, refrigerant recovered and charged, oil recovered and charged, vacuum time and vacuum leak test pass/fail. The information can then be used in discussions with the customer regarding any faults or advisory work. See page 35 for more detail

Very efficient & simple to use. ACM3000 - Excellent entrylevel performance Cost effective and efficient The ACM3000 is an easy-to-use fully functional refrigerant management station. It delivers excellent performance for carrying out A/C servicing on cars and light commercial vehicles. As a proven entry-level machine, the ACM3000 is very efficient and simple to use. It is particularly well suited and cost-effective for workshops and repairers carrying out low volumes of A/C servicing or as a second unit for those workshops that carry out a lot of A/C services. Automated processes The ACM3000 incorporates automatic functions for the core elements of the servicing process. Once underway, the operator only has to return to the ACM3000 to inject replacement oil, record oil volumes on the printed results and the job is complete. Alternatively, the operator can use the machine in a manual mode and retain step-by-step control. If UV dye is required to be added to the system, then this will need to be done through the use of a manual dye injection tool, available from Autoclimate. Built-in printer The integrated printer produces a detailed record of the completed A/C service, which can be retained or used in discussion with the customer. Although the ACM3000 does not include a full database as standard one can be installed at any time when required, through a purchase of a USB key from Autoclimate. See page 36 for more detail

Specially designed and built for larger volume bus, coach and HGV MAC systems. AC790PRO - Packing a punch Heavyweight performance Powerful, robust and functional An easy-to-use refrigerant management station specially designed and built for larger volume bus, coach and HGV MAC systems. The AC790PRO incorporates a more powerful vacuum pump and compressor, greater capacity refrigerant tank and oil bottles, together with a power charge pump to aid charging. Efficient operation The large twin fan-cooled condenser ensures excellent temperature and constant coolant pressure during recovery which prevents vital internal components from overheating. With a large 35KG refrigerant tank and 2 litre oil in/out bottles, the AC790PRO has the capacity to deal with large systems. More power and larger capacity Due to its power, the AC790PRO is ideal for a number of applications, and can be used in a wide range of industries where R134a is used. Some past purchasers of the AC790PRO include franchised truck operators, military organisations, coach fleet operators, construction and compact equipment specialists and train manufacturers. See page 36 for more detail

Autoclimate Refrigerant Management Station Comparison Chart AC1234-8 AC1234-7 AC788PRO AC690PRO AC790PRO ACM3000 Part Number 02404-1011 02404-1013 02404-0222 02404-0116 02404-0118 02404-0144 Compatible with HFO-1234yf Compatible with R134a Works on Hybrids / electric vehicles Mode Automatic / manual Automatic / manual Automatic / manual Automatic / manual Automatic / manual Automatic / manual Built in Refrigerant Identifier Deep Recovery function Automatic refrigerant recycling Recovered refrigerant filtered Vehicle database On Board On Board 4,000+ vehicles 4,000+ vehicles 4,000+ vehicles No - update available Diagnostics No - update available Printer Built in Temperature Probe Powercharge Pump Automatic Vacuum leak test Flush Prepared Capability Automatic UV dye injection Auto Oil Injection Auto oil drain Display TFT Screen TFT Screen TFT Screen 80 character LCD 80 character LCD 40 character LCD Interface for data exchange Multi Lingual Display Service Gauges 100mm class 1 100mm class 1 80mm class 1 80mm class 1 80mm class 1 80mm class 1 Vacuum Pump 2 stage - 170 litres/min 2 stage - 170 litres/min 2 stage - 170 litres/min 2 stage - 170 litres/min 2 stage - 283 litres/min 2 stage - 70 litres/min Hermetic Compressor 1/3hp 1/3hp 1/3hp 1/3hp 1/2HP 1/4HP Condenser Standard Standard Standard Fan Cooled Twin fan cooled Fan Cooled High Perfromance dry filter 710cc 710cc 710cc 710cc 710cc 300cc Refrigerant tank 10Kg 10Kg 20kg 20kg 35Kg 8Kg Standard Hoses 2.5m 2.5m 2.5m 2.5m 2.5m 2.5m Oil Storage 2 x250ml 2 x250ml 2 x250ml 2 x250ml 2 x 2litre 2x250ml Precision of Scale +/- 5g +/- 5g +/- 5g +/- 5g +/- 5g +/- 5g Max Operating pressure 16 Bar 16 Bar 16 Bar 16 Bar 16 Bar 16 Bar Working envrionment 10-50 C 10-50 C 10-50 C 10-50 C 10-50 C 10-50 C Weight 110Kg 110Kg 110Kg 110Kg 120KG 60KG Warranty 24 months 24 months 12 months 12 months 12 months 12 months Legend: includes does not include 16 www.autoclimate.com 0345 505 0900 17

Leak Detection Electronic Audible and visual sensors alert the presence of leaks. Variable intensity helps to pinpoint leaks quickly and accurately. See page 44 for more detail. Detecting A/C leaks is essential to protect the environment and prevent time consuming and expensive problems. Autoclimate supplies a range of equipment and consumables for electronic, ultra violet dye, infrared, pressure and ultrasonic solutions. Ultrasonic Ultrasonic technology filters ambient noise and amplifies key frequencies to pick up the hissing sound of escaping gas. This approach is ideal for use with pressure testing equipment. Key Fact The Autoclimate Ultrasonic Marksman 2 kit is also ideal for detecting air leaks, gear or bearing wear and gasket integrity. See page 44 for more detail. Infrared Robinair 22791 leak detector uses infrared optics to create a refrigerant leak detector that combines sensitivity, speed, battery life, portability and ease of use. This unit will detect leaks as small as 0.15/4.25 oz/gms year. Key Fact The infrared leak detector is suitable on both R134a and the new HFO-1234yf refrigerant systems. See page 45 for more detail. Ultra Violet Dye After UV dye is added, leaks fluoresce under UV light where the dye has escaped. It is recommended you invest in quality high concentration UV dyes and high intensity UV lamps - small leaks are then easier and quicker to identify. See page 45 for more detail. Please note: When ordering dye for the first time, delivery mechanism, torch and visibility enhancing glasses will also be required. Autoclimate use Tracerline Important: Some dye manufacturers use Aromatic 200 solvent to disperse UV dyes. This product was originally designed for lacquers and also used in pest control. It is not suitable for automotive A/C as it may affect lubrication - causing wear, a higher risk of equipment failure and may invalidate warranty. Solvent free additive dyes VM approved Ultra-bright fluorescing dyes Particle free solution dyes High intensity detection lamps Wide choice of kits and systems Dyes for other fluids available See pages 52-53 for more detail. 18 www.autoclimate.com 0345 505 0900 19

Induction Heating This is an excellent product and is both innovative and durable - Prices vehicle repairs Mini-Ductor II Use Flameless heat to save time and money Save time and Money There are many instances during the repair process where certain nuts or bolts will require the use of heat to help loosen them, especially where they have seized. Traditionally this would involve the use of a blowtorch, or some type of flame, to apply heat to the nut. This method works but can also have a negative impact. For example, the areas around the focus of the work become very hot, with a risk of fire. The Mini-Ductor ll uses induction technology to create flameless heat. The heat is only concentrated on the area you are working on and will only heat metal or treated plastics. This minimises risk of collateral damage and cool off periods, saving the repairer time and money. Some of the different uses The Mini-Ductor ll is supplied with 3 different coil types, which can be easily and quickly changed depending on your application. These different coil types help the vehicle technician reach practically every area of the vehicle. There are many applications for the Mini- Ductor ll including: All types of seized hardware, trim removal, inline application, fuel tank straps, preventing expensive wheel damage, hail dent removal, steering and suspension, bearings, gears and pulleys On demand The Mini-Ductor II has a lightweight, ergonomic design, and weighing just over 1kg it is easy to pick up and carry around the workshop. Also, with the heat output being on demand, there is no need to power up and wait for the Mini-Ductor ll to be used, it can heat up nuts and bolts in typically 15 seconds. The addition of the Mini-Ductor ll to the workshop tool range could mean the end of the acetylene torch for the majority of jobs of this type. Remember to tell the insurance company if it does, your renewal fee could come down! The Mini-Ductor ll helps save time: Remove and install automotive glass Remove stubborn graphics and badges in seconds (the glue is removed with the decal) Remove and install side mouldings in under an hour Remove hard to remove nuts and bolts Safely remove adhesive bonded components on metal surfaces. Perform tasks that previously could not be carried out with traditional heat sources The Mini-Ductor ll helps improve quality and safety: It only heats metal objects No more burning or melting of glass, paint, plastic, or other non-metallic materials Rapidly heats rusted fasteners without an open flame, enabling technicians to work near plastic and other sensitive components, thus significantly reducing the risk of fire. See page 40 for more detail Tried and Tested RAPS (Repairer Approved Product Scheme) provides a new level of accreditation for products. RAPS give a selection of repairers the opportunity to test products before they are released by Autoclimate for general sale. Autoclimate will only sell the product if it passes the RAPS test. It is Autoclimate s belief that RAPS is a standard which can be trusted by repairers, because it is set by repairers. The Mini-Ductor ll received 80% in testing See review comments online at www.autoclimate.com

Diagnostics Diagnostics - a good working practice for the modern accident repair centre Why Should an Accident Repair Centre have a Diagnostic tool? Progressing Technology VMs have been driven in recent years to make their vehicles not only more environmentally friendly, but also enhance their driver s comfort and experience. This has led to the reduction of vehicle weight, and more dependency is placed on electrics to help deliver comfort. For the vehicle to work as efficiently as it can, the introduction of a single line communication cable known as a CAN Network is commonplace. This in principle is a single cable passing data from one ECU to another and in turn activates the necessary component. More necessity than want With ECUs now placed around the vehicle, it is not just the extras that may require diagnostic tools in the repair process. Safety systems such as airbags, and newer automatic distance control features are all controlled and linked into ECUs. Repair work that is carried out will require the use of a diagnostic tool a vast majority of the time if the job is to be completed correctly. ECUs need to be reprogrammed to accept new parts, and warning lights need to be reset; all jobs which are not possible without a diagnostic tool. Looking for additional revenues A vehicle in the workshop after an accident is no longer visually inspected easily; there can be a number of warning lights triggered and other damage that needs repairing. It is best working practice, to use a diagnostic tool on the vehicle whilst it is there, at no additional cost. Another added benefit is that problems or faults may be identified which are unrelated to the accident. You can make the policyholder aware of this, and they may authorise the additional work to be carried out - money received directly into the workshop.

Helping to increase the entire workshop performance Reducing key-to-key time. External factors An important factor for the aftermarket is key-to-key time ; how fast and efficiently a vehicle is repaired and returned to the customer. However, as vehicle technology has advanced, the challenges of repairing vehicles have increased. New technologies can require the use of a subcontractor or passing the vehicle onto a Franchise Dealer. Both deliver little profit, increase your costs, extend your key-to-key time and put strain on other jobs in the workshop. The mega macs 42 will reduce the need to subcontract work. Word of mouth Improving the key-to-key time will benefit and strengthen relationships with work providers as well as with the policyholder. Customer retention is key to many accident repairers, doing a good job for a policyholder in a quicker than expected fashion would result in possible future work with that customer and further work if they spread the word. Being up to speed with your diagnostics can truly help your business to grow. Fits in well with the MOT process Since January the 1st 2012, new rules have been put in place by the Department for Transport (DfT) affecting the MOT; this has been implemented to comply with European testing procedures. Since April 1st 2012 the new rules must be met to receive your MOT certificate. If a car has any illuminated warning lights, whether it is the airbag, seat belt, ESP, SRS, ABS or others, it must fail the MOT. The mega macs 42 can reset a number of these lights, for example: See page 40 for more detail Electronic stability control Headlight main beam Electronic power steering Brake fluid level Tyre pressure monitoring system Airbag Seat belt pre-tensioner Steering & suspension. Very good and easy to use with good data coverage - FRF Accident Repair Centre The mega macs 42 scored 90% in the R.A.P.S test process See review comments online at www.autoclimate.com

High end powerful diagnostics delivered in a simple to use and effective way Operator Videos Although confident that the mega macs 42 can be picked up and used almost immediately by first time users, Autoclimate is aware that some people may need a little helping hand or others may simply forget how to use certain aspects of the tool which are not used frequently. mega macs 42 At no additional cost, there is a library of 17 high quality HD operator videos available to customers on the Autoclimate website, which can be watched at any time, in any sequence. The videos range from simple navigation through to how to re-code particular components as required. Wireless connectivity The mega macs 42, via the Air macs base unit, can connect to your office printer and allows for the screen images to be printed, an excellent feature which users will want to use on nearly every occasion. Having the ability to hand printouts to customers not only increases professionalism but also boosts any audit trails that you may want to record. Previous vehicles which have had the mega macs 42 tool used on them will be stored in the tools memory ideal if you ever see the car again so you can see the vehicle history from the occasions you have worked on it. The latest data Having the latest available data on your mega macs 42 is vitally important and means you are more likely to be able to work on the newer vehicles in your workshop. If you are subscribed to receive updates, you will receive notification when a major update is available. Updates typically are every 6 months and are implemented through connection to the internet. View SD & HD operator videos on line: www.autoclimate.com See page 40 for more detail 24 www.autoclimate.com 0345 505 0900 25

BT-250 Battery Tester 20% of vehicles arriving in the workshop have a battery problem which is currently going unnoticed Fast accurate results Handheld - 12v digital battery tester Batteries Maintenance/Test Although the days of topping up the electrolyte in an automotive battery are long gone, a battery still needs some maintenance, especially if the vehicle has been in storage. The best and simplest way to test the battery to see if it needs charging or replacing is by using the Schumacher BT-250 from Autoclimate. Every time a vehicle visits your workshop, it takes just a few seconds to test the battery accurately to the manufacturer s own specifications Missing a sales opportunity / Customer satisfaction The more batteries you check, the greater the opportunity to sell a replacement battery, offer a battery re-charge, or advise the customer that their battery needs replacing soon to avoid a costly breakdown call out. Any time of the year Did you know that a battery loses charge faster in hot weather than cold? Checking batteries should not just be a winter job. Batteries fail quicker in the warmer weather. The heat speeds up the chemical reaction that releases the stored electricity. A vehicle left stored in your compound or car park will see its battery degrade faster in the summer. It s the increased resistance in the wiring and electrical components that causes the weakened battery to fail in colder weather. A good, solid, easy to use product and great accuracy - Penning s ARC The BT-250 Battery Tester scored 80% in the R.A.P.S test process See review comments online at www.autoclimate.com Advantages of using the BT-250 Battery Tester Low Cost Easy to use Fast return on investment - 3 battery sales cover the cost Safe to use Accurate Customer satisfaction Minimise inconvenience Save time BT-250 features Tests 12v batteries Compatible with standard and AGM battery types Results in 5-7 seconds Tests to all popular standards SAE, DIN, IEC, EN & CA Industry standard test procedure and accuracy Indicator to ensure the correct connection of clamp to terminals Charging system test Super-grip heavy duty clamps Impact resistant protective boot included Large clear LCD display 9v battery included See page 41 for more detail

Clean simple way to reduce air locks Safe and low cost operation for long service life Coolant Exchange The Importance of Purging Trapped Air Airlocks The Problems Erratic temperature gauge readings, engine overheating, and poor heater performance are just some of the problems caused by airlocks. Trapped air often works its way out of a cooling system after a day or two of driving, but unless a vehicle s cooling system is designed to be self bleeding, you need to take special steps to purge trapped air from the cooling system whenever the system is opened for service. Remember airlocks can cause under performance of the coolant system which leads to faster corrosion of parts, correct vacuum filling eliminates this risk. Modern Cooling Systems Many of today s passenger cars are designed with heaters positioned higher than the rest of the cooling system. This leads to air pockets tending to collect in the heater circuit. Unfortunately, many engines with bleed screws have the bleed points positioned lower than the heater. Engine-mounted bleed screws help prevent airlocks within the engine block and heads, but they may not help when it comes to purging trapped air from the heater core. An easy to use solution All existing refill procedures are complicated, time consuming and very messy. This can be eliminated with the Vacufill which is simple and safe to use. Vacufill Quick, Easy, Clean Suitable for most vehicles The Vacufill is a coolant exchanger designed for ease of use based on the use of compressed air. With simple knob controlled operations, the process of coolant exchange can now be completed in 15 minutes in a non labour intensive fashion. Suitable for most vehicles with an expansion tank, overflow tank or overflow pipe-based system, it comes supplied with a range of adapters. The Vacufill does not require vehicle hoses to be cut or disconnected saving the cost of replacement parts and potential lost labour time. Refills in seconds Fast, efficient and low cost to operate, the Vacufill s built-in vacuum function will test cooling systems for leaks. Whilst the system is under vacuum, fresh pre-mixed coolant can be drawn into the system. This process means no airlocks and a more successful service, in a clean simple manner. Perfect for coolant checks Included in the Vacufill package are accustrips and a refractometer, creating the perfect combination for annual anti-freeze checks and antifreeze replacement. The refractometer will display the amount of protection afforded by the coolant (temperature based) whilst the accustrips give an indication of how effective the coolant will be against corrosion to the system. Additional Revenue The Vacufill also offers a great upsell opportunity for any workshop and adds an additional revenue stream which is ever vital in today s competitive environment. Test repaired systems Accident repairers can benefit greatly from using the Vacufill. Recovery, storage and refilling become one simple operation, allowing the repairer to use the same coolant recovered and saving on the cost of new replacement coolant. All the staff that use this have good comments - MDS The Vacufill scored 84% in the R.A.P.S test process See review comments online at www.autoclimate.com See page 37 for more detail

Airlift II Eliminates any possible airlocks Handheld - professional coolant refilling tool Refills in seconds Fast, efficient and low cost to operate, the Airlift ll uses compressed air to pull a vacuum on the cooling system testing for leaks, as recommended by all major VMs. Whilst the system is under vacuum, fresh pre-mixed coolant can be drawn into the system. This process means no airlocks and a more successful service, in a clean and simple manner. Tried and Tested Autoclimate will only sell the product if it passes the RAPS test. It is the belief of Autoclimate that RAPS is a standard which can be trusted by repairers, because it is set by repairers. RAPS gives a selection of repairers the opportunity to test products before they are released by Autoclimate for general sale and the Airlift II is no exception. Suitable for most vehicles The Airlift ll is a coolant refilling tool designed to use compressed air. With simple valve controlled operations, a quick vacuum leak check and effective refilling process can be carried out in minimal time. Supplied with a fits-all cone adapter the Airlift ll is suitable for use on expansion tank, overflow tank or overflow pipe based systems It is an amazing product for refilling any car radiator. We used it on a Honda Civic diesel and it cut the time from 1 hour to 5 minutes. We could not believe how quick it was - Autospray Motor Body Works, Aberdeen The Airlift ll scored 86% in the R.A.P.S test process See review comments online at www.autoclimate.com See page 37 for more detail

Anti-Bacterial Cleaning Autoclimate recommends that vehicle air conditioning systems are run all year round. In addition to reducing service and maintenance problems, A/C also dehumidifies the air entering the vehicle and also filters soluble or very fine airborne contamination. Autoclimate offers two solutions: The Opportunity A/C anti-bacterial servicing is a worthwhile and profitable opportunity and customers will appreciate the benefits immediately. Therefore it is important that all systems must remain clean and free of bacteria. Autofresh One Shot This combined A/C cleaner and deodorant is the perfect quick fix to keep on the shelf. To apply: Start the engine, set temperature to cold, fans to maximum, recirculation on and open face vents Shake the can well, slide the passenger seat right back and place the can in the footwell Close the windows, press the button to start the spray and exit the vehicle Return after 20 minutes to a fresh smelling vehicle See page 54 for more detail Ultrasonic Nebuliser To tackle the problem at source, this system uses ultrasonic technology to disperse very fine droplets of the anti-bacterial cleaning solution directly into the A/C evaporator. It is a professional level system that is ideal for longer lasting results, or where the problem is particularly acute or persistent only requires minimal labour time. To apply: Use one bottle of solution per vehicle Place the nebuliser in the passenger footwell with the outlet tube running to the air recirculation inlet valve Run the vehicle with the A/C off, heater at minimum temperature and low fan speed Close all doors Return after 20 minutes to a fresh smelling vehicle www.autoclimate.com 0345 505 0900 31

R.A.P.S in partnership with our customers Autoclimate RAPS (Repairer Approved Product Scheme) is a customer-engaged product evaluation process. RAPS offers participating repairers, workshops and service garages the opportunity to carry out independent, scorecard-based product assessments RAPS for Parts Participating RAPS panel members* test-fit parts and evaluate overall appearance, material quality and finish, together with OE manufacturer part comparisons. RAPS for Tools, Equipment and Consumables Participating RAPS panel members* assess a range of specified criteria related to each product, typically features and functionality, quality and durability, ease of use, value performance and business benefits. At the end of each evaluation, the completed scorecards are returned to Autoclimate for review. Only products which meet the process s high, exacting standards receive Autoclimate RAPS approval. We believe it is important to engage with our customers at every opportunity and RAPS helps us to stimulate active participation in our product management processes. Every RAPS evaluation is highly valued and we truly appreciate the support of our customers in the process. Russell Wellings, Managing Director, Autoclimate. RAPS approval provides Autoclimate customers with an increased level of confidence in their purchasing selection. It gives the reassurance that evaluation has been carried out in a representative, working environment. RAPS approved products also comply with the appropriate industry standards, work provider guidelines and legislation. * Autoclimate customers are invited to apply to join the RAPS panel. I am interested in joining the RAPS panel Please call 0345 50 50 900 or complete the contact us form on our website: www.autoclimate.com

Products A/C Service Equipment 34 Coolant Exchange 37 Portable Equipment 38 Equipment & Tools 40 Flushing 43 Leak Detection 44 General Tools 47 Consumables 51 Package Essentials 55 Trading Terms & Conditions 66 This is not a comprehensive list of all products supplied by Autoclimate. If it is not in the catalogue please contact customer services on 0845 50 50 900 (Option 1) for availability. Disclaimer The contents of this publication are correct at time of publication. Autoclimate Limited reserves the right to vary, modify or change any of its products, services or specifications including those described or referred to in this publication at any time without prior notice. 2012 Autoclimate Limited www.autoclimate.com 0345 505 0900 33

A/C Service Equipment AC1234-7 The AC1234-7 is an automatic refrigerant management station with complete programme and walk-away capability. It automatically controls the recovery, vacuum and recharging processes for oil, UV dye and refrigerant, as well as filtering the recovered refrigerant. The AC1234-7 has an integral printer. Power supply 220-240v AC, 50Hz Refrigerant HFO-1234yf Weight 110kg Dimensions 128cm x 69cm x 69cm Cabinet Inflatable rear tyres, front castors Refrigerant tank 10kg Oil 2x250ml plus spare bottle High performance dry filter 700cc Hermetic compressor 1/3hp Hoses 2.5m standard Working environment 10-50 C Max operating pressure 16 bar, 232 psi Recharging scale precision +/- 5gm Vacuum pump 2 stage 170 litres/min, 6.5 cfm Modes Manual - Automatic, Integral printer Yes Display Colour TFT screen Multi-lingual display Yes Service gauges 100mm class one bar and psi scales Vehicle database Yes - smart key updates Refrigerant recycling Filters recovered refrigerent Vacuum leak test Automatic Oil drain Automatic electronic scale Oil injection Automatic electronic scale UV dye injection Automatic electronic scale Recovery re-start Automatic Integrated diagnostics Yes Part No. 02404-1013 Notes AC1234-8 The AC1234-8 is an automatic refrigerant management station with complete programme and walk-away capability. It automatically controls the recovery, vacuum and recharging processes for oil, UV dye and refrigerant, as well as filtering the recovered refrigerant. The AC1234-8 has a built in refrigerant identifier, and an integral printer. Power supply 220-240v AC, 50Hz Refrigerant HFO-1234yf Weight 110kg Dimensions 128cm x 69cm x 69cm Cabinet Inflatable rear tyres, front castors Refrigerant tank 10kg Oil 2x250ml plus spare bottle High performance dry filter 700cc Hermetic compressor 1/3hp Hoses 2.5m standard Working environment 10-50 C Max operating pressure 16 bar, 232 psi Recharging scale precision +/- 5gm Vacuum pump 2 stage 170 litres/min, 6.5 cfm Modes Manual - Automatic. Integral printer Yes Display Colour TFT screen Multi-lingual display Yes Service gauges 100mm class one bar and psi scales Vehicle database Yes - smart key updates Refrigerant recycling Filters recovered refrigerent Vacuum leak test Automatic Oil drain Automatic electronic scale Oil injection Automatic electronic scale UV dye injection Automatic electronic scale Recovery re-start Automatic Integrated diagnostics Yes Vehicle A/C performance test Prompted Flush-prepared facility Yes with integrated software 34 Part No. 02404-1011 Notes

A/C Service Equipment The AC788PRO is an automatic refrigerant management station with complete programme and walk-away capability. It automatically controls the recovery, vacuum and recharging processes for oil, UV dye and refrigerant, as well as filtering the recovered refrigerant. The AC788PRO has an extensive, integrated vehicle database, a built-in vehicle-specific diagnostics facility, an integral printer and the capability to carry out servicing on hybrid and electric vehicles. AC788PRO Power supply 220-240v AC, 50Hz Refrigerant R134a Weight 110kg Dimensions 128cm x 69cm x 69cm Cabinet Inflatable rear tyres, front castors Refrigerant tank 20kg Oil 2x250ml plus spare bottle High performance dry filter 710cc Hermetic compressor 1/3hp 14cc Hoses 2.5m standard, other lengths available Working environment 10-50 C Max operating pressure 16 bar, 232 psi Recharging scale precision +/- 5gm Vacuum pump 2 stage 170 litres/min, 6.5 cfm Modes Manual - Automatic Integral printer Yes Display TFT Multi-lingual display Yes Service gauges 80mm class one bar and psi scales Internal tank gauge Display measurement Vehicle database Yes - Integrated smart key update Internal database 4MB programmable Refrigerant recycling Filters recovered refrigerant Vacuum leak test Automatic Part No. 02404-0122 Notes The AC690PRO is a fully automatic refrigerant management station with complete programme and walk-away capability. It automatically controls the recovery, recycling, vacuum and re-charging process for oil, dye and refrigerant. The AC690PRO has an extensive, integrated vehicle database, user database, built-in vehicle-specific diagnostics facility and integral printer. AC690PRO Power supply 220-240v AC, 50Hz Refrigerant R134a Weight 110kg Dimensions 128cm x 69cm x 69cm Cabinet Inflatable rear tyres, front castors Refrigerant tank 20kg Oil 2x250ml plus spare bottle High performance dry filter 710cc Hermetic compressor 1/3hp 14cc Hoses 2.5m standard, other lengths available Working environment 10-50 C Max operating pressure 16 bar, 232 psi Recharging scale precision +/- 5gm Vacuum pump 2 stage 170 litres/min, 6.5 cfm Modes Manual - Automatic Integral printer Yes Display 80 Character LCD Multi-lingual display Yes Service gauges 80mm class one bar and psi scales Internal tank gauge Display measurement Vehicle database 4.000+ Vehicle database Internal database 4MB programmable Refrigerant recycling Automatic Vacuum leak test Automatic Oil drain Automatic electronic scale Oil injection Automatic electronic scale UV dye injection Automatic Recovery re-start Automatic Part No. 02404-0116 Notes www.autoclimate.com 0345 505 0900 35

A/C Service Equipment ACM3000 The ACM3000 is a compact, lightweight, automatic A/C refrigerant management station. It is fully functional and delivers excellent performance for carrying out A/C servicing on cars and light commercial vehicles. As an entry-level machine, the ACM 3000 is simple and time efficient to use. It is particularly well suited and cost effective for workshops and repairers with low volumes of work. Part no. 02404-0144 Power supply 220-240v, AC 50Hz Refrigerant R134a Weight 60kg Dimensions 95cm x 55cm x 52cm Cabinet Solid rear tyres, front casters Refrigerant tank 8.0kg Oil bottle 2 x 250ml High performance dry filter 300cc Hermetic compressor 1/4hp, 9cc Hoses 2.5m standard, other lengths available Working environment 10-50 C Condenser Fan-cooled Max operating pressure 18 bar 261 psi Recharge scale precision +/-5gm Vacuum pump 2 stage 70 litres/min, 2.5 cfm Modes Manual - Automatic Integral printer Yes Display 40 character, back-lit LCD Operator prompts Yes Multi-language display Yes Service gauges 80mm class1, bar and psi scales Tank gauge 40mm, bar and psi scales Vehicle database Optional smart key update Refrigerant recycling Automatic Part No. 02404-0144 Notes AC790PRO The AC790PRO is a heavy duty refrigerant management station. Designed specifically for bus, coach and HGV systems, it has a more powerful vacuum pump and compressor and larger coolant tank. The AC790PRO is fully functional, easy to use and automatically controls the recovery, recycling, vacuum and re-charging processes for refrigerant and oil separation. Power supply Refrigerant Weight Dimensions Cabinet Refrigerant tank Oil High performance dry filter Hermetic compressor Hoses Working environment Condenser Max operating pressure Scale precision Vacuum pump Modes Integral printer Display Operator prompts Multi-lingual display Service gauges Internal tank gauge Vehicle database Powercharge Refrigerant recovery Vacuum leak test Oil drain Oil injection UV dye injection 220-240v, AC 50Hz R134a 120kg 128cm x 69cm x69cm Inflatable rear tyres, front casters 35kg 2 x 2 litres 710cc 1/2hp, 18cc 5m standard (other lengths available) 10-50 C Twin fan-cooled 16 bar, 232 psi +/-5gm 2 stage 283l/min, 10 cfm Manual - Automatic Yes 80 character, back-lit LCD Yes Yes 80mm class one bar and psi scales 40mm bar and psi scales Yes - Smart key updates Automatic Automatic Automatic Automatic Manual, solenoid visual control No (Seperate kit required) 36 Part No. 02404-0118 Notes

Coolant Exchange Fast economical servicing and cooling system testing Vacufill New coolant fill tank 11 litres Waste/recycle reservoir 45 litres Air requirements 6.26 bar, 90 psi Weight 32kg Dimensions 130cm x 49cm x 48cm Part No. 02406-0012 Notes A quick, easy, safe solution to the problem of air locks in vehicle cooling systems Airlift II Minimum air required Weight dimensions Workable systems Operation Gauges 90psi (6 bar) 2.5kg 13.5cm x 25cm x 40cm Works on all types of cooling systems Manual - powered by workshop air Large, clear vacuum gauge Part No. 02602-0373 Notes www.autoclimate.com sales orders and enquiries 0345 505 0900 37

Portable Equipment Portable Charging Station Refrigerants Operation Vacuum Pump Charging Gauges Hoses Oil Injection Voltage Features Comment All, Including R134a Manual 5CFM (2509-003) Manual charging scale (2501-008) Compound, pressure & vacuum 96 x 1/4 flare Enviroguard hose set Complete with R134a automotive couplers Built in 220 / 240V 50/60 Hz or (110V ver. available) Heavy duty portable charging unit Choose between 240V or 110V Part No. Notes 02400-0017 110V 02400-0021 240V Charging Scale - Manual Programmable Battery operated scale with a 110Kg capacity. Can be used in or out of case with adjustable feet & level indicator in the platform. When using the charge programming function an alarm will alert the operator before charge is complete to allow time to turn of refrigerant supply. Tank capacity programming feature allows the operator to know the amount of refrigerant that s in the tank at any time. Battery life approx 40 hrs. Automatic shut-off after 3hrs. Operating temp: 32F to 120F (0C to 49C) Power Weight Limit Platform Dim. Display Weight Res. 9v Battery 110kg (243Lbs) 25cm x 25cm (Approx.) Digital 10 grams (0.2 oz) Part No. 02501-0008 Notes Dual Voltage Recovery Unit Dual Voltage Refrigerants Capability Pressures Recovery Rate Purging Operating Range Inlet Fittings Weight Voltage All types including R410a Recovery only Medium & high pressure refrigerants Vapour Up to 30 kg per hr Liquid Up to 84 kg per hr Liquid - P/P Up to 330 kg per hr Self clearing 0 to 50 C 1/4 MFL 16 kg 220-240V 50/60 Hz or 100v 50/60Hz Part No. 02403-0034 Notes 38 Many more products are available - please contact us for details

Portable Equipment Refrigerant tanks for recovery units or for storing recovered or virgin refrigerant. All tanks have air purge fittings for non-condensable gases Cylinders - (Refrigerant Tanks) Refrigerant Sizes Tap Fittings Protection Pressure All types 30Ib (13.6kg) 50lb (22.7kg) Yellow & grey - 1/4 SAE liquid & vapour tap fittings Blue - 1/2 ACME liquid & vapour tap fittings Float switch (Available, see below) Tank fail-safe pressure 800psi Part No. Notes 02618-0005 (Yellow & grey - 30lb with 1/4 SAE fittings) 02618-0006 (Yellow & grey - 50lb with 1/4 SAE fittings) 02618-0000 (Blue - 30lb with 1/2 ACME fittings) 02618-0004 (Blue - 50lb with 1/2 ACME fittings) 02611-0031 (Float switch) www.autoclimate.com sales orders and enquiries 0345 505 0900 39

Equipment & Tools Mini-Ductor II - Heat Inductor The Mini-Ductor ll is a powerful 1000-watt handheld induction power inverter that features an ergonomically shaped, slip-resistant hand grip and an ultra bright LED to illuminate the work load. Safe and fast to use, removal of seized nuts and other parts is made much easier without the danger of an open flame. Power Supply 220-240v AC Dimensions 15 x 2.5 x 2.5 Weight 1.2Kg Cord Length 6 Coil Life On average 500 uses (3,000 if no contact with work load) Work area illumination LED Output Power 1000 watt Coils included 1 x U-form, 1 x 7/8 pre-form and 1 x bearing buddy Time to heat ¾ nut 15 seconds Storage Case with custom foam inserts Warranty 12 months Part No. 02602-0374 Notes mega macs 42 - Diagnostics Tool A compact lightweight diagnostic tool - tested and proven for use by accident repairers. Exceptional functionality, unrivalled performance and comprehensive vehicle coverage Supply voltage Battery charging voltage Current consumption Power supply 12 18 V 8,4 V max. 1 A, standard 500 ma 1 Li-Polymer battery, min. 1000 mah, Vehicle electrical system voltage through ST2, Mains supply Display Type of construction: LCD-TFT. Size: 3.8 Storage medium Flash Input Membrane keypad Working range 0 45 C Weight 0.7 kg incl. battery Dimensions 43 x 124 x 209 mm (H x W x D) Type of protection IP31 Interfaces USB device, ST2 Part No. Notes 02320-0011 With 1 year software update 02320-0012 With 2 year software update 02320-0013 With 3 year software update + 3 year warranty 40 Many more products are available - please contact us for details

Equipment & Tools The BT-250 is a hand held, 12v digital microprocessor, battery tester for fast and accurate results. Easy to use simply connect the heavy duty clamps and results will be displayed on the large clear LCD display within 5-7 seconds BT250 Battery Tester Power supply Display Battery types tested Standards tested To Further tests Capacity Range Results Indicators Clamps Protective boot Warranty 9v battery included Large clear LCD Display 12v All types including Stop/Start SAE, DIN, IEC, EN & CA Charging system 185-1125 CCA 5-7 seconds Check Clamp to ensure correct connection Super-grip heavy duty clamps Impact resistant 12 months Part No. 02390-0001 Notes The Schumacher PB12212 battery booster delivers all the necessary functions and added features that help it to produce great power for long periods without the need for constant recharging providing a long life for the booster itself. Battery Booster Cranking Amps Cold Cranking Amps Peak Starting Amps Jump Starting Output 225 Amps 185 Amps 1100 Amps 388Amps@5 seconds Part No. 02390-0002 Notes www.autoclimate.com sales orders and enquiries 0345 505 0900 41

Flushing Flushing & Leak Detection Adapter Kit Universal flushing kit for liquid refrigerant flushing of contaminated A/C systems. For use when replacing components or converting systems. Can also be used for leak testing at component level with refrigerant or oxygen free nitrogen. This kit contains all the necessary bridges and adapters to enable open circuit high pressure flushing and leak detection. Fits 95% of all European and Japanese vehicles. Designed to be used with all Robinair/Autoclimate Refrigerant Management Stations. Part No. Notes QTY 02502-0117 Adapter Kit 1 02602-0181 Universal Adapter # 1A 1 02602-0182 Universal Adapter # 2A 1 02602-0183 Universal Adapter # 3A 1 02602-0115 Compressor Bridge # 1 1 02602-0050 Bridge # 1 1 02602-0064 Bridge # 2 1 02602-0110 Bridge # 3 1 02602-0111 Bridge # 4 1 02602-0118 Bridge # 5 1 02602-0119 Bridge # 6 1 02602-0138 Bridge # 7 1 02602-0139 Bridge # 8 1 02602-0152 Bridge # 9 1 02602-0184 Bridge # 10 1 02602-0185 Bridge # 11 1 02602-0186 Bridge # 12 1 02602-0187 Bridge # 13 1 02602-0188 Bridge # 14 1 02600-0117 Rubber Seal # 1 1 02600-0118 Rubber Seal # 2 2 02600-0119 Rubber Seal # 3 3 02607-0067 Spare O ring set 1 02503-0162 Valve Core Tool 1 02600-0124 Adapter # 1 Female O-Ring 1 02600-0125 Adapter # 2 Female O-Ring 1 02600-0126 Adapter # 3 Female O-Ring 1 02600-0127 Adapter # 4 Male O-Ring 1 02600-0128 Adapter # 5 Male O-Ring 1 Part No. Notes QTY 02600-0129 Adapter # 6 Male O-Ring 1 02600-0130 Adapter # 7 Male O-Ring 1 02600-0131 Adapter # 8 Male O-Ring 1 02600-0132 Adapter # 9 Male O-Ring 1 02600-0133 Adapter # 10 Male O-Ring 1 02600-0134 Adapter # 11 Male O-Ring 1 02600-0135 Adapter # 12 Male O-Ring 1 02600-0136 Adapter # 13 Male O-Ring 1 02600-0137 Adapter # 14 Male O-Ring 1 02600-0138 Adapter # 15 Male O-Ring 1 02600-0139 Adapter # 16 Male O-Ring 1 02600-0140 Adapter # 17 Male Flare 1 02600-0141 Adapter # 18 Male Flare 1 02600-0142 Adapter # 19 Male Flare 1 02600-0143 Adapter # 20 Male Springlock No.6 1 02600-0144 Adapter # 21 Male Springlock No.8 1 02600-0145 Adapter # 22 Male Springlock No.10 1 02600-0146 Adapter # 23 Male Springlock No.12 1 02600-0147 Adapter # 24 Female Springlock No.6 1 02600-0148 Adapter # 25 Female Springlock No.8 1 02600-0149 Adapter # 26 Female Springlock No.10 1 02600-0150 Adapter # 27 Female Springlock No.12 1 02600-0151 Adapter - High Side 1 02600-0152 Adapter - Low Side 1 02600-0120 Adapter - 3/8 x 24 UNF > 1/2 x 16 2 02600-0121 Adapter - M14 x 1.5 > 1/2 x 16 2 02600-0122 Universal Adapter Seal Mount 1/2 x 16 1 02600-0123 Universal Adapter Seal Mount 1/2 x 16 1 00701-0080 Carry Case 1 42 Many more products are available - please contact us for details

Flushing Refrigerant management station adapter kit enables your Robinair RMS unit to be converted to accept liquid refrigerant flushing. Flushing Kit Adapter Part No. Notes 02502-0116 Fits 342001,34701-2k,AC400,AC500,AC600,AC590 & AC690 02502-0118 Replacement filter canister www.autoclimate.com sales orders and enquiries 0345 505 0900 43

Leak Detection Leak Detector - Refrigerant This electronic leak detector is ergonomically designed to fit in your hand. The 2505-011 is packed with features which help pinpoint leaks quickly. 16 Goose neck probe holds it s position so the operator can detect leaks with one hand. Audible & visual leak indicators. Adjustable audible leak signal control. Threshhold balance control - eliminates background contamination. Leak detection 0.5oz (15gms) per annum. 4 x AA batteries included. Refrigerants Type Approvals All Halogenated refrigerants Corona discharge CE, UL & SAE J1627 Part No. Notes 02505-0011 (16600) - Leak detector 02607-0008 (16503) - Sensor tip Ultrasonic Marksman 2 Full master kit complete with ultrasonic receiver, air probe, contact probe, headphones and carrying case (includes 9 volt battery). Applications Ideal for detecting A/C - Refrigeration - Automotive - Industrial - Marine - Railroad - Heavy duty Trucks. Air brake leaks - compressed air leaks - gear & bearing wear - vacuum leaks - evap system leaks - electrical discharge -exhaust leaks - refrigerant leaks -gas & liquid turbulence - cabin seal / gasket integrity. Complies with ROHS directive Part No. 02505-0092 Notes Leak Detector Kit - UV UV Leak detector kit for air conditioning & refrigeration systems. Kit also includes leak detection fluids which covers motor oil, fuel, coolant, automatic transmission, power steering, hydraulic systems and auto body leaks Application Fluorescence Lamp Manufacturer For R134a, R12 & other systems Green Optimax Jr. LED (Battery powered) Tracerline Part No. 02505-0062 Notes 44 Many more products are available - please contact us for details

Leak Detection Complete with British plug. Metal Maglite style torch. 10 times brighter than regular LED lights. Over 6 hours operation between charges. Inspection range of up to 20 feet or more. Includes UV enhancing glasses. Comparable to super-high intensity 100watt lamps. UV Torch Application Manufacturer All A/C and fluid systems Tracerline Part No. Notes 02505-0078 Rechargable (Includes 2613-005 UV Glasses) 02505-0059 Battery (Includes 2613-005 UV Glasses) The Robinair 22791 is a hand held lithium battery operated, infrared leak detector for fast and accurate results. Easy to use once a self calibration has been carried out after being switched on it will give response times in less than half a second. Infrared Leak Detector Power supply Battery Life Gases measured Sensing element Warm up time Response time Accuracy Sensitivity levels Calibration Probe length 7.4VDC (nominal) rechargeable lithium ion polymer battery Approximately 8 hours when fully charged CFC, HFC, HCFC blends Infrared 30 Seconds less than ½ second Meets SAE J2791 standards HIGH (0.15 oz/year and higher) MEDIUM (0.25 oz/year and higher) LOW (0.5 oz/year and higher) Automatic 15 inches Part No. 02505-0090 Notes This nitrogen leak detection system is suitable for testing a variety of air conditioning and refrigeration systems. If pressure testing is your favoured method of leak detection you may well benefit from the added portability of this product, especially compared to traditional alternatives. Leak Detector - Portable Nitrogen Kit Heavy duty nitrogen regulator. 80mm Class 1.0 gauge with clearly marked pressure testing ranges, manually adjustable pointer and calibration screw. Inlet pressure 200 bar (2900 PSI). Working pressure of up to 48 bar (700 PSI). Supplied with 36 high pressure standard hose. Pressure gauge is connected to a 6 high pressure ball valve hose. Includes 1 x 950g oxygen free nitrogen disposable cylinder (950cc 110 bar) Part No. Notes 02505-0036 Portable nitrogen kit 02603-0240 Black 90cm hose 02603-0241 Pressure gauge assembly (Includes ISO valve) 01202-0000 950g disposable cylinder of nitrogen gas www.autoclimate.com sales orders and enquiries 0345 505 0900 45

Leak Detection UV Dye Injector Assembly EZ-Shot multidose dye injector gun for use with UV BigEZ 4 & 8 fl oz dye cartridges Part No.s 2615-033, 034, 035 & 036 and injector hose 2603-111 R134A low side coupler plus 2600-024 adaptor Part No. Notes 02503-0132 (TP-9749) R12 or R134a Dye Injector Hose For use with EZ-Ject, BigEZ & EZ Shot UV dyes. Part No. 2615-007, 2615-008, 2615-033, 2615-034, 2615-035 & 2615-036 Please note: Additional adapter Part No. 2600-024 is required to convert hose to fit 2615-033, 034, 035 & 036 UV dye cartridges Coupling R134a Hose has Low side connector Part No. Notes 02603-0111 R134a 02600-0024 Conversion adapter for 4 & 8 fl oz dye UV Dye - Cartridge (4 & 8 floz) UV Cartridge Dye for EZ & EZ-Shot injector (See Part No. 2503-132). 4 floz cartridge also fits Spotgun, Blue-Point & Viper brands System Lubricant Size Fluorescence Refrigerant Manufacturer PAG oil systems 4 & 8 Fluid oz cartridge (Thread 3/8 MF) Green All types Tracerline Part No. Notes 02615-0033 4 floz R134a/PAG 02615-0034 8 floz R134a/PAG 46 Many more products are available - please contact us for details

General Tools Set of 6 spring lock disconnect tools for disconnecting refrigerant hoses. Allows quick, safe disconnect of spring lock couplers on various vehicle makes & models. Spring Lock Release Set Size 5/16, 3/8, 1/2, 5/8, 3/4 & 7/8 Part No. 02503-0193 Notes Set of four spring lock couplers for disconnecting refrigerant hoses. Allows the quick, safe disconnection of spring lock couplers on late model Ford and other systems Spring Lock Release Set Size 3/8, 1/2, 5/8 & 3/4 tubes Part No. 02503-0011 Notes This 5 box set of A/C o-rings is suitable for most makes of vehicles from Alfa to Volvo, all contained in a metal cabinet. Contains 5 x 120 different HNBR material compatible with R12/R134a. (600 o-rings in total) Seals - Vehicle A/C systems Colour coded - green, yellow (Volvo) & purple (Audi, Ford & VW) brown (Renault & Citroen) Laminated cross reference sheets with original supplier numbers and applications, o-rings also identified by actual dimensions. Part No. 01502-0031 Notes www.autoclimate.com sales orders and enquiries 0345 505 0900 47

General Tools Plugging Kit bodyshops Air conditioning system plugging kit. Designed to prevent the ingress of moisture & debris when undertaking repairs on the system or non-related areas which require the disconnection of A/C components. This plugging system requires the use of a recovery unit & vacuum pump so that the A/C system can be plugged & evacuated whilst repairs are undertaken. This methodology prevents the need to replace the accumulator / receiver drier due to open circuit. Part No. 02600-0092 Notes Hose - Enviroguard Enviroguard hose used as standard on many Robinair machines 1 2 Length End fittings 1) 2) Working pressure Burst pressure Construction 2.5, 5, 7.5m 1/2 ACME straight - open ended 14mm straight male 740 Psi (51bar) 3700 Psi (255bar) Composite material 1 2 Part No. Notes 02603-0196 2.5m Blue 02603-0228 7.5m Blue 02603-0231 5m Blue 02603-0197 2.5m Red 02603-0229 7.5m Red 02603-0230 5m Red - Other variants available 48 Many more products are available - please contact us for details

General Tools This adapter allows you to connect the charging stations to the Renault Laguna & Vel Satis without having to invert the service hoses or quick couplers. Hose - Adapter Additionally this adapter also allows you to use standard UV dye injectors which are only compatible with a low pressure service port on these vehicles. Part No. 02503-0173 Notes This adapter allows you to connect the high pressure side of the charging stations to the Volvo S80, BMW E60 and the latest Galaxy 2006 CA1. Hose - Adapter Part No. Notes 02503-0191 Extra long 02503-0172 Quick coupler for R134a automotive A/C system connections. Hose - Couplers Size Construction 14mm female hose connection Heavy duty R134a coupler Part No. Notes 02600-0004 Blue coupler - (14mm connection) 02600-0005 Red coupler - (14mm connection) 02600-0079 Blue coupler - (1/4 SAE connection) 02600-0078 Red coupler - (1/4 SAE connection) www.autoclimate.com sales orders and enquiries 0345 505 0900 49

General Tools Adapter Straight adapter with 1/2 ACME female to R134a Low side coupler. Used to couple virgin refrigerant cylinder (with 1/2 ACME male port) to various Refrigerant Management machines. Size Construction 1/2 ACME x R134a Low side coupler Brass fitting Part No. 02600-0087 Notes Adapter Straight adapter with 1/4 female to R134a Low side coupler. Used to couple virgin refrigerant cylinder (with 1/4 male port) to various Refrigerant Management machines. Size Construction Part No. 02602-0267 Notes 1/4 FFL x R134a Low side coupler Brass fitting Adapter Straight adapter with 1/2 ACME female fitting x 1/4 male flare fitting. Converts 1/2 ACME refrigerant cylinder valve to 1/4 SAE male fitting Size Construction 1/2 ACME female x 1/4 SAE male FL Brass fitting Part No. Notes 02602-0147 (Brass fitting) 02607-0051 (Replacement seal) Adapter Straight adapter with 5/8 BSP female fitting x 1/4 male flare fitting. Converts 5/8 BSP refrigerant cylinder valve to 1/4 SAE male fitting Size Construction 5/8 BSP female x 1/4 SAE male FL Brass fitting Part No. Notes 02602-0255 (Brass fitting) Adapter Straight adapter with 1/2 ACME male fitting x 1/4 female flare fitting. Converts 1/4 refrigerant cylinder valve to 1/2 ACME male Size Construction 1/4 SAE FFL x 1/2 ACME male fitting Brass fitting Part No. Notes 02602-0165 (Brass fitting) 01500-0208 Replacement seal Adapter Straight hose adapter with 14mm male to 1/4 male flare fitting. Used to convert LP & HP R134a hose couplers Size Construction 14mm x 1/4 SAE MFL Brass fitting Part No. 02600-0007 Notes 50 Many more products are available - please contact us for details

Consumables Returnable for easy handling. Suitable for all R134a refrigerant management stations. Manufactured by the worlds largest refrigerant manufacturer thus guaranteeing purity time after time. Cylinder conforms to EN12205 R134a Refrigerant Cylinder Tap Size Male 1/2 ACME 13.6 kg Part No. Notes 01201-0008 13.6kg cylinder R134a (1/2 ACME male) 02600-0087 (Adapter 1/2 ACME x R134a low side coupler) New automotive air conditioning lubricants for all R134a air conditioning systems. Optimised to provide the highest performance available in mobile vehicle air conditioning compressor applications. PAG (Polyalkylene Glycols) Approved by most of the worlds leading automotive and compressor manufacturers with millions of compressor fills and miles of testing. Autoclimate RL PAGs demonstrate outstanding stability, excellent lubricity and better performance when compared to competitor products. Part No. Notes 01600-0004 250ml PAG RL 46 01600-0005 250ml PAG RL 100 01600-0006 250ml PAG RL 150 Laboratory tests prove that Robinair vacuum pump oil is more thermally stable in comparison to other leading brands. This means it resists breaking down due to heat for a longer period of time. The performance of the vacuum pump depends largely under quality & purity of the vacuum pump oil. Robinair s oil is engineered to maintain max. viscosity at high running temperatures and to improve cold weather starts. Vacuum Pump Oil Size Pint, Quart or US Gallon Part No. Notes 01620-0001 US Pint 01620-0002 US Gallon 01620-0003 US Quart www.autoclimate.com sales orders and enquiries 0345 505 0900 51

Consumables UV Dye - Capsule UV Dye capsule. For use with dye injector tool Part No. 2505-049, 2505-054 & 2600-102, 103, 104 & 105 System Lubricant Size Fluorescence Refrigerant Manufacturer Tread PAG systems Single shot for Vehicle A/C Systems Green R134a & others Tracerline 1/4 SAE thread Part No. Notes 02615-0042 R134a/PAG - Single capsule 02615-0044 R134a/PAG) - Box of 6 UV Dye - Cartridge UV Cartridge Dye (Ez-ject). For use with dye injector tool Part No. 2503-061, 2505-049 & 2505-054 System Lubricant Size Fluorescence Refrigerant Manufacturer Thread PAG systems 0.5 floz cartridge (13 Vehicle A/C Systems) Green R134a Tracerline Thread 1/4 SAE Part No. Notes 02615-0007 R134a (PAG) 02615-0008 Universal 52 Many more products are available - please contact us for details

Consumables Fluoro-Lite UV bottled dyes for all air conditioning & refrigeration systems. Average requirement per vehicle A/C system is approx. 1/4 fluid oz. UV Dye - Bottle System Lubricant Fluorescence Size Manufacturer Universal (mineral & ester) or PAG Green 1, 8, 16, 32 & 64 fl. Oz. Tracerline Part No. Notes 02615-0022 1 oz universal 02615-0023 16 oz universal 02615-0024 32 oz universal Part No. Notes 02615-0015 1 oz PAG 02615-0048 8 oz PAG 02615-0020 16 oz PAG 02615-0021 32 oz PAG Glo Away Dye cleaner removes all traces of dye from repaired leak sites, so repairs can be verified. It is water based, non-toxic, non-flammable, noncarcinogenic, bio degradable and has no offensive odours. It is safe to use on plastic, rubber and metals. Use with all Autoclimate UV leak detection products. Dye Remover / Cleaner Size Manufacturer 8 oz spray bottle,16oz refill & 8oz pump action canister Tracerline Part No. Notes 02615-0013 8oz bottle 02615-0037 16oz refill 02615-0039 8oz Pump action canister www.autoclimate.com sales orders and enquiries 0345 505 0900 53

Consumables Ultrasonic Nebuliser Use with Autoclimate Ultrasonic Nebulizer fluid to clean the vehicle A/C system. Uses ultrasonic technology to vaporize the antibacterial deodorising fluid so that it can be distributed throughout the vehicle s A/C system. Voltage 110V or 240V models Part No. Notes 02503-0197 110v 02503-0207 240V A/C Ultrasonic Cleaner Solution Use with Autoclimate Ultrasonic Nebuliser tool to clean vehicle A/C system. 1 bottle of the anti-bacterial deodorising fluid is sufficient for the average size vehicle. Size 125ml Part No. Notes 00793-0007 Autofresh One Shot Autofresh One Shot is a unique air conditioning cleaner and deodorant. It can be administered anywhere, without technical knowledge or equipment and leaves behind a long lasting yet mild fresh aroma. Part No. Notes 00793-0008 Single 00793-0009 Box of 6 00793-0010 Box of 12 00793-0011 Box of 24 54 Many more products are available - please contact us for details

Package Essentials Premium-quality gloves made of a high performance nitrile compound which provides an outstanding combination of strength and chemical resistance. Applications include automotive de-greasing, automotive assembly and painting, machining operations, cutting oil, coolants and air conditioning. Splash Protection Gloves Part No. 02613-0001 Notes Goggles protect against liquid splashes and large dust particles. Safety Goggles Part No. 02613-0002 Notes Hand held thermometer offers the accuracy, flexibility and ease of use coupled with the reliability that is required by industry today, at an affordable price. Easy to read LCD digital display with a precise readout of temperature. Includes max/min & hold button Digital Thermometer Temp. Range Reading Accuracy Sampling Time - 50 to + 150 C (- 58 to + 302F) Centigrade & Fahrenheit +/- 0.5 C 500 msec Part No. 02508-0020 Notes www.autoclimate.com sales orders and enquiries 0345 505 0900 55

Accreditations & Partnerships Autoclimate is committed to establishing and maintaining mutually beneficial, long term partnerships with manufacturers, suppliers and trade associations. The company recognises the need to continue developing market understanding and knowledge at all levels. Technical partnerships The company has close, well established, technical partnerships with van and commercial VMs including DAF, Fiat, Ford, Iveco, MAN, Mercedes-Benz, PSA, Renault, Volkswagen and Volvo. Insurance Companies Autoclimate has parts supply agreements with leading insurance companies and supplies parts into their national networks of approved repairers. Vehicle Manufacturers Autoclimate supports a number of vehicle manufacturer training facilities with the supply and support of air conditioning servicing equipment. Franchise Partner Autoclimate is a franchise partner of the Fiat Group. The company is fully authorised to supply parts for Fiat and Alfa Romeo cars, car derived vans and light commercials. Engineering Relationships Autoclimate is a qualified bodybuilder partner to Mercedes-Benz vans in the UK. Associations and memberships Society of Motor Manufacturers and Traders - member City & Guilds - approved centre Retail Motor Industry - member Institutions Autoclimate maintains academic and technical links with the University of Lincoln and Harper Adams University College. 56

Membership For a single, low-cost monthly subscription, accident repairers are able to enjoy the benefit of a range of high value products and services Equipment Rental Garage equipment available on 3 year inclusive rental terms to avoid the need for capital investment Growing equipment range includes air conditioning, diagnostics and coolant exchange Autocat Pro A quarterly issued CD of vehicle technical data Information on refrigerant charges, a/c oil types, diagnostic information and technical data Covers over 3,500 vehicle make/model derivatives Vehicle Database Based on DVLA and SMMT data Entering a vehicle registration returns 35 fields of information Helps make the repair estimate easier, quicker and more accurate Minimises the risk of downstream parts problems Increases the chance of right first time ordering Automotive distribution software Autoclimate design, produce and support their own streamline procurement systems Repairers improve efficiency, save time and money and achieve improvements in profitability First introduced in 2001 Training Receive unlimited a/c training free of charge* Courses can be held on site or at the Autoclimate training centre in Shrewsbury Refrigerant Handling certification available at a discounted rate Equipment familiarisation, service advisor courses and sales advisor courses all available Interceptor system All members receive Interceptor installed at their premises Installed on the customers computer, interceptor interacts with bodyshop management and estimating systems Using DVLA data, part lines from estimates are matched to parts that can be supplied For more information on Interceptor contact the Autoclimate main office on 0345 50 50 900 where you can speak to a dedicated member of staff for your region Management information Receive a monthly rebate on purchases Monthly reports to help with efficient purchasing Parts purchases, lost opportunities, parts purchase rebate and parts locator are some of the reports offered *Excluding C&G registration / certification www.autoclimate.com 0345 505 0900 57

Customer Services The Personal Touch At the core of the company ethos is a commitment to provide a very high standard of customer service to every Autoclimate customer. All areas of the business are focused on helping customers with their service and repair activities. Ready to help with uncomplicated advice The Autoclimate customer services team has a wealth of experience and expertise. Whether for information about new products, legislation changes or industry developments an advisor will always be pleased to help. Opening hours Mon Fri 8.30am 5.30pm Dedicated regional business manager available for on-site support Area specific customer service advisors and outbound telesales and marketing personnel Technical support team on the phone and in the field Product guidance and advice available Simple ordering process fax, phone, email Targeted next working day delivery 58

Technical Support Autoclimate offers comprehensive technical support to users of equipment supplied by Autoclimate. Covering: Operator advice and troubleshooting Arrange field engineer visits for equipment servicing/repair Diagnostic support of the equipment Gas charges, oil viscosity and wiring diagrams* Access to vehicle manufacturer databases and support tools Identification of replacement parts for equipment Customer fit option Replacement operator guides supplied OR CONTROLS 30 P127 cia Fuse Box F 6 Satellite Fuse Box 1 25 A use Details See Fuse Details S2041 NG 30 C2007 30 K127 Ignition Load Relay 2045 GP 6 86 B 87 87 C2007 WG NAS Wiring diagrams* Parts identification* Procedure guides* Except NAS S227 S227 HJ4 HJ4 WG WG 9 C212 9 C212 7 C2073 7 C2073 UR UR Except NAS NAS C A B Z211 Fan Timer Diode GW Cooling Fans 4 S2015 HJ10 See Ground Distribution E200 CIRCUIT DIAGRAM MFI-V8 MFI-T16 NAS SFI-V8 K2-11 K2-10 K2-5 K2-6 K2-7 K2-8 K2-9 300Tdi without EDC 300Tdi with EDC *Autoclimate Access and Autocat Pro CD subscribers only www.autoclimateaccess.com A/C Performance Test Recharge Service Report (Please tick appropriate box) Mr/Mrs: Address: Post Code: Telephone: PLEASE COMPLETE ALL BOXES - Inspected OK X - Attention required (See below) n/a - Not applicable Vehicle Make: Vehicle Model: Registration No.: Odometer Reading: VIN: R S 1 Record Record System Ambient Temperature 2 Record HVAC Controls 5 3 Record Odour 4 6 7 8 Check Evaluate Record Record Record Record 11 Record 12 Add Centre Face Low Side System Pressure High Side System Pressure System Refrigerant Quantity Lubricant Quantity Recovered** A/C System Lubricant A/ C System Lubricant System with Refrigerant Refrigerant Evaporator Vent n/a n/a 9 10 Recovered n/a n/a 13 Record 14 Recharge (If Necessary) Replaced Quantity Recovered Amount of Replaced Dehydrator for Leaks, Damage, Corrosion n/a n/a n/a n/a n/a n/a n/a n/a n/a Record 16 Visually inspect Note: Replace Dehydrator if 17 Evacuate A/C System Visually inspect Compressor Compressor 15 & Security Required Drive Belt Drive Belt Tension n/a 18 19 Check n/a A/C Performance Test Results / Record RESULTS Initial Final Refrigerant Type n/a % of Air n/a Ambient Temperature ( C) System Pressure (A/C Off) Low Pressure n/a High Pressure n/a System Pressure (A/C On) Low Pressure High Pressure Centre Face Vent Temperature ( C) Refrigerant Quantity Recovered n/a Lubricant Quantity Recovered n/a Lubricant Quantity Replaced n/a Refrigerant Quantity Replaced n/a www.autoclimate.com 0345 505 0900 Job No.: T = TEST R = RECHARGE S = SERVICE R S OPERATION Visually inspect COMMENTS Inspect Refrigerant Pipes and Hoses Inspect Condenser for Leaks, Damage, Air Flow etc. Inspect A/C Electrical Components & Connections Drain Tube (Where Possible) Filter (If Fitted) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 20 Visually inspect Inspect Evaporator & Particulate (If Possible) 21 Visually inspect Inspect Pollen Mounting Fan Operation 22 Visually inspect Compressor / Radiator (If Necessary) n/a n/a n/a n/a n/a n/a n/a 23 Visually inspect Condenser Lubricant Replaced of Refrigerant 24 25 Check Check A/C System A/C System Lubricant with Speci ed Quantity Replaced Seals for Leaks 26 Add A/C System Refrigerant and 27 28 Record Amount of Pipes, Hoses 29 Recharge 30 Record Check All Refrigerant Ambient Temperature Centre Face Vent Temperature Pressure n/a n/a n/a n/a n/a n 31 Record Side System System Pressure Noise & Distribution 32 Record Low Side Operational Operation ) 33 Record High Compressor - - Function, Required 34 Record HVAC Controls Detection Dye (If 35 Check Leak for Leaks 36 Check UV Service Ports 37 Add 38 39 Check 59 Attach RMS Printout Here * If pressure is below 0.5 bar advise customer that system requires attention / service ** After completing Point 11 please advise customer o Please Note: The performance test does not in any way indicate the overall condition of the air conditioning system and any of its associated ing system and its associated components are inspected and checked as part of an A/C Service. For further information please contact our Attention Required: CHECKED BY: DAT Please provide the customer with a copy of this A/C Performance Test / Recharge / Service

National Service Support Autoclimate provides on-site repair for the equipment it supplies. Autoclimate has a national network of experienced, fully qualified field engineers who provide on-site maintenance and repair services for equipment they have supplied* The field engineers also carry out annual servicing on customer units according to manufacturer recommendations. Although the majority of equipment-related issues are resolved remotely, if this is not possible, an engineer visit will be arranged, together with shipment of the most likely replacement parts to repair the unit on-site. Autoclimate the UK s only approved Robinair repairer Full UK coverage Response time - best endeavours within 3 working days All work controlled by hand-held computers No return to base requirement - all repairs carried out on-site** All engineers hold latest refrigerant handling qualification C&G 7543-001 Engineers fully trained to work on all Robinair refrigerant management stations Engineers receive regular updates on latest products and safety standards Full compliance to legislative standards Calibration certificates available on request e.g. to comply with ISO Quality Management and PAS125 system audits *Where necessary for supplied equipment ** Excluding diagnostic equipment 60

Training - Onsite To help meet these requirements, Autoclimate provides customers with both operator and vocational level training for their technicians and service personnel. The vital elements: Training in the use of designated equipment according to manufacturer instructions and guidelines Working in a safe and secure manner, including the use of designated safety and personal protective equipment Understanding of the principles and technologies relating to air conditioning servicing and repair Proving continuity to ensure that training is not regarded as a one-off consideration. Staff changes, new developments and technologies give rise to new training requirements and refresher training Operator Training As part of the installation process for each Robinair RMS unit, the commissioning engineer will carry out a basic operator training session for the specific RMS at no additional charge. Up to 6 technicians can be trained in a single session of about 2 hours duration covering: Refrigerant recovery System vacuum Gas re-charge Other Equipment Autoclimate aim to support equipment they supply as much as possible and larger items such as the Vacufill will include on-site operator training. A fully trained engineer will arrange a date and time when he can arrive to help set up the Vacufill and will give a demonstration to the technicians in the workshop - showing them the best working practice of the machine. At the end of this session, technicians will be issued with a certificate to confirm that they are able to operate the specific refrigerant management station in a safe and environmentally-friendly manner. Please note: It is a legal requirement that technicians hold a City & Guilds 7543-001 Refrigerant Handling Certificate or an equivalent qualification. Training - Safety In common with many types of repair and service activities, working with vehicle air conditioning systems carries some fundamental responsibilities. There are inherent risks when working with refrigerant gases and pressurised environments and without question every safeguard must be taken. www.autoclimate.com 0345 505 0900 61

Autoclimate offers a comprehensive vehicle air conditioning training programme which takes place at the company s training centre in Shrewsbury. Knowledge and expertise delivered in logical stages across six modules Begin from an introduction up to more complex diagnostics Modules should be taken with 3 month gaps between them Theoretical explanations are supported by detailed illustrations, practical exercises, workshop activity and classroom assessments Multiple choice is used in assessments to minimise written requirements Technicians can register for City & Guilds Profile of Achievement Training Manual The Autoclimate Training Manual, covering all six modules and is available for purchase there is no requirement to attend the training programme. Go from beginner to expert within weeks Clear modular structure develops knowledge in simple easy-to-follow stages Step-by-step procedures for service, diagnostics and repair 300 pages of explanation, illustration, diagrams and photographs to aid understanding Order part no. 03500-0000 62

BATTERY UNDER- HOOD FUSE/RELAY BOX No. 22 (100A) BLU/BLK BLK No. 11 (20A) 2 1 2 RADIATOR FAN MOTOR 1 No. 23 (1G) (50A) No. 21 (40A) No. 9 (20A) GRN BLK RADIATOR FAN RELAY GRN ECM/PCM FANC 12 WHT RED 2 A/C CONDENSER FAN MOTOR A/C CONDENSER FAN RELAY UNDER- DASH FUSE RELAY BOX GAUGE CONTROL MODULE No. 30 (7.5A) 3 1 3 1 4 2 4 2 RADIATOR FAN SWITCH (Closed: 1 Above 93ºC (199º F)) BLU/YEL G301 G301 G301 IGNITION SWITH BAT WHT D2 BLK 1 15 BLU/RED 21 23 24 ACC 18 BLU/YEL RED BRN 4 4 A/C COMPRESSOR CLUTCH RELAY 3 2 3 A/C COMPRESSOR CLUTCH RELAY CONTROL MODULE 25 WHT BLU 17 12 LT BLU BLU/RED 1 THERMAL PROTECTOR BLK G302 BLU/RED WHT/BLU WHT (BLK/YEL) A/C PRESSURE SWITCH *: In the under-hood fuse/relay box 2 1 1 2 BLOWER MOTOR RELAY BLU WHT/BLU WHT (BLK/YEL) BLU LT BLU CLIMATE CONTROL UNIT WHT (BLK/YEL) DRIVING CIRCUIT 5V 5V 12V 5V 5V 5V 5V 1 2 3 5 4 0 2 0 9 8 7 6 10 1 LT BLU RED (RED/BLK) PNK LT GRN LT BLU BLU GRN WHT GRY RED PUR WHT YEL GRN WHT PNK GRN BRN 2 WHT (BLK/YEL) 1 1 BLU WHT A 2 B 2 C BLU CONNECTOR A (22P) CONNECTOR B (16P) BLK/YEL RED (RED/BLK) RED/BLK RED (RED/BLK) D RED/BLU 1 2 7 GRY S5V S COM 3 DRIVER S PNK/BLU AMD-P AIR MIX 2 CONTROL MOTOR PNK/BLU M-HOT 1 GRN M-COOL GRY 7 S5V S COM 3 YEL PASSENGER S AMD-P AIR MIX 2 CONTROL LT GRN MOTOR M-HOT 1 YEL/BLU M-COOL 2 YEL/RED M-VENT 1 YEL/BLU M-DEF 4 RED/YEL MODE 1 S COM 5 MODE CONTROL RED/BLU MODE 2 MOTOR 4 WHT/BLU MODE 3 3 YEL/GRN MODE 4 5 GRN/WHT FRS RECIRCULAION CONTROL 1 IG2 MOTOR LT GRN/RED REC 3 1 BLOWER MOTOR POWER TRANSISTOR A : IN-CAR TEMPERATURE SENSOR B : OUTSIDE AIR TEMPERATURE SENSOR C : SUNLIGHT SENSOR D : EVAPORATOR TEMPERATURE SENSOR RED/BLK RED/BLK BLK/YEL II RHD WHT/BLU 1 2 BLU/BLK BLK G503 4 2 A Comprehensive Programme Module 1 A/C Fundamentals & Refrigerant Handling - 2 days First principles of theory through to legislation covering the ozone layer and the greenhouse effect, service equipment, procedures and practical assessment. Module 2 A/C Components - 1 day Builds detailed understanding of the operation, purpose, construction and types of key components. Sample procedures are given for liquid refrigerant flushing and retrofit, i.e. converting R12 systems to R134a. Climate Control System Circuit Diagram (K20A/K24A) Climate Control System Circuit Diagram Module 3 M Auto Electrics (Introduction) - 1 day Provides technicians with a basic overview of general principles and specifics relevant to A/C, includes practical exercises on fault finding. M Module 4 M Basic Diagnostics - 1 day Reviews the principles of A/C with detail on fault finding for both thermostatic expansion valve (TXV) and fixed orifice tube (FOT) systems, using gauge pressures for diagnostics. Key repair procedures are included. Module 5 Climate Control - 1 day Introduces climate control configurations, functions, operations and components before examining diagnostic techniques for climate control components, dual zone systems and twin evaporator systems. Module 6 Advanced Diagnostics - 1 day Reviews A/C principles and components, diagnostic equipment, correct procedures, practical fault finding and recommended repair procedures. www.autoclimate.com 0345 505 0900 63

Legislation The threat of climate change is well known and the 1997 Kyoto Protocol established binding agreements to reduce man-made emissions of greenhouse gases. Legislation matters European Council approved agreements in 2002 R134a, the refrigerant used in vehicle air conditioning was one of the gases listed that needed to be reduced Since 2002 F-Gas Regulations have worked their way into law across EU member states The Law Since September 2009 it has been a criminal offence to charge a system with R134a without reasonable due diligence being undertaken to ensure that there are no leaks in the system Since July 2010 anyone handling refrigerant to service or repair car or light commercial vehicle A/C systems, must hold a nationally recognised qualification Refrigerant manufacturers since July 2007 have not legally been allowed to fill disposable cylinders for sale in the EU Key Fact R134a, the refrigerant used in vehicles built after 1993, has a global warming potential (GWP) of 1,300 over 100 years. Even relatively small amounts of refrigerant lost to the atmosphere will cause an adverse effect to climate change. HFO 1234yf has been introduced as the new gas 64

Refrigerant Handling CERTIFICATE OF UNIT CREDIT TOWARDS Level 3 Certificate In Mobile Air Conditioning Systems is awarded to ANOTHER CANDIDATE who attended AUTOCLIMATE Training - Refrigerant Handling Certification and was successful in the following 1 module As a market leader in automotive air conditioning, Autoclimate takes its responsibilities on compliance and legislative requirements very Refrigerant Handling for Servicing Mobile Air Conditioning Systems (Meets the minimum requirements of Regulation (EC) 307/2008) seriously. With its wide ranging knowledge and expertise, Autoclimate was selected by the Retail Motor Industry Federation (RMIF) to provide expert input throughout the DEFRA consultation process that ultimately shaped the implementation of the F-Gas regulations. As a consequence of this, the company is uniquely qualified to provide Refrigerant Handling Certification for its customers. The arrangements available are simple, flexible and cost-effective. One option is to attend formal training courses at the Autoclimate Training Centre, although before making such a commitment, it is recommended that on-site assessment is considered. On-site assessment involves less cost and disruption and there is no formal training requirement. Simply make a booking and an information pack containing all the requirements will be sent out. When the preparations have been completed, an Autoclimate assessor will attend and, if the pass level is achieved, the candidate will be awarded their City & Guilds 7543-001 certificate. On-site training Off-site training at the Autoclimate Training Centre Minimum skills and knowledge handbook Assessment by qualified engineer City & Guilds 7543-001 certification awarded Key Fact City & Guilds 7543-001 is a lifetime qualification. There are no subsequent re-test or top-up requirements and therefore represents a very cost effective investment. www.autoclimate.com 0345 505 0900 65

General Terms & Conditions of Sale 1. TRADING ADDRESS AUTOCLIMATE LIMITED Head Office & Development Centre 37 Atcham Business Park, Shrewsbury SY4 4UG United Kingdom Tel. Numbers: +44 (0)345 5050900 Fax Number: +44 (0)345 5050901 Email: info@autoclimate.com Internet: www.autoclimate.com Other details: Company Registration Number: 3866594 VAT Registration Number: 404 2837 73 Bank Details: Bank name: Natwest Bank PLC Address: Natwest Bank, 8 Mardol Head, Shrewsbury, Shropshire England. SY1 1HE Account: Autoclimate Limited Sort Code: 55-50-05 Sterling ( ) payments : Account No. 55617166 Swift/BIC: NWBK GB2L IBAN No.: GB22 NWBK 5550 0555 6171 66 Euro ( ) payments : Account No. 550/00/58879358 Swift/BIC: NWBK GB2L IBAN No.: GB91 NWBK 6072 0158 8793 58 2. PRICING (a). All prices quoted are net of VAT. UK mainland orders will be subject to the prevailing VAT rate at the time of order. Exemption from VAT will only be granted on Export orders when an official order has been received before the order has been processed (b). It is the intention of AUTOCLIMATE LIMITED not to alter its pricing or discount structure for a period of twelve months from the date of which this price list was printed. However where the need to change or alter the pricing or discount structures may arise AUTOCLIMATE LIMITED reserves the right to change without notice (c). Additional carriage / freight charges will apply on all despatched goods. Please refer to Delivery Charges Section. 3. TRADING TERMS & CONDITIONS OF CREDIT (a). Goods are not sold on Credit unless a Credit Account has been approved. For UK Credit Application Forms please enquire (b). Goods sold on credit must be paid for within 30 days from the end of the month in which the goods were purchased / invoiced. Failure to comply will result in credit facilities being withdrawn indefinitely. Outstanding Credit Accounts requiring the use of Solicitors to recover Monies will be subjected to all charges arising there from. (c). AUTOCLIMATE LIMITED reserves the right to cancel or refuse Credit Account facilities without reason. 4. HOURS OF BUSINESS 8:30 am to 5.30 pm - Monday to Friday. 5. ORDERS (a). Orders will not be processed without an official Order Number. (b). All orders will be sent by overnight delivery unless stated or otherwise instructed by the ordering customer. (UK mainland only) (c). Please state clearly which depot or branch the ordered goods are intended for delivery to if applicable. (d). It is the intention of AUTOCLIMATE LIMITED to ensure timely deliveries and adequate stocking levels to meet customer demand. Where demand has exceeded stocking levels or special order requirements are necessary it is the intention of AUTOCLIMATE LIMITED to fulfil this demand as soon as reasonably possible. Additional freight charges may apply. (e). Incorrectly ordered goods may not be accepted for credit unless returned without damage or interference and unless a valid goods return number (GRN) has been obtained within 5 working days from the date of delivery. To obtain a GRN please contact Customer Services by telephone using the number shown in Section 1. Carriage charges will not be credited and handling charges will apply @10% of the value of the goods. 7. DELIVERIES (a). All orders placed before 4.00 PM on the day of order will ensure an Overnight delivery where stock is available (UK mainland only) Orders placed after this time will be processed the following day. Please see Delivery Charges section for current rates 8. TO PLACE ORDERS Refer to contact numbers in Section 1 N.B. All orders must be accompanied by an Order Number 9. WARRANTY AND GUARANTEE. (SUPPLY OF GOODS) (a). AUTOCLIMATE LIMITED guarantees all parts and components for a period of twelve months from the date of sale against defective manufacture in accordance with the terms laid down by Supplying Manufacturers. (b). Replacement parts will be invoiced, until such time that the faulty goods have been returned and inspected. Credit will only be given if the goods are proved to be faulty. (c). Warranty claims will only be considered if returned goods are accompanied with a fully completed Warranty Returns Form. Failure to comply will result in Warranty Rejection. (d). Labour claims arising from Warranty Replacement or Fault will only be paid in accordance with that offered by the Product Manufacturer where agreement exists and only in accordance with their supplied pricing menu. (i). Where such agreements exist AUTOCLIMATE LIMITED will issue the customer with an Official Warranty / Order Number for invoicing purposes. Invoices sent without quoting this number will be returned unpaid and stamped Rejected. Please enquire for further details. (ii). Where no agreement exists AUTOCLIMATE LIMITED will not accept liability for claims arising from breakdown or any other costs arising there from. (e). Additional warranty periods may be available on certain products but all such extended warranties will be chargeable (f). Warranty claims on products supplied with specified service and maintenance requirements will only be considered where such requirements can be shown to have been met (g). Warranty claims for compressor mount brackets will only be considered if the compressor drive belt and idle pulleys have been maintained in accordance with the schedule below: Maximum drive belt life - 25,000 miles (40,000 km) or 12 months, whichever comes first. Note: Vehicles fitted with a manual belt tensioner must be retensioned within 5,000 miles (8000 km) and every 10,000 miles (16,000 km) thereafter. Maximum idle pulley life - 50,000 miles (80,000 km) or 24 months, whichever comes first. (h). Products for vehicle installation are designed and manufactured to operate under normal vehicle working cycles and conditions. Therefore, warranty claims will not be accepted if it is considered that vehicles have been operating in extreme engine cycles or conditions (i). Products for vehicle installation are designed and manufactured to operate on the specific vehicle application(s) stated in the product information / application guide. Therefore, warranty will not be accepted if additional changes have been made to vehicles which may be considered to adversely affect the performance of such products. NOT COVERED BY WARRANTY - This section is not an exhaustive list 1. Fair wear and tear of any part, normal maintenance service items and the parts and materials used in connection with this procedure. 2. Failure of any compressors supplied for use in transport refrigeration applications will be deemed to be the result of fair wear and tear. 3. Labour claims arising from product fault unless offered by the Supplying Manufacturer and then only in accordance with their menu pricing structure. 4. Consequential loss, damage or recovery of any kind. 5. Defects in replacement parts not supplied by AUTOCLIMATE LIMITED. 7. Minor irregularities not affecting quality, performance or function. 8. Damage caused by external influences e.g. Fire, Flood, Steam cleaning etc. 9. Damage caused by traffic accident, abuse etc. or use of the vehicle under unusual conditions such as Races, Rallies etc. 10. TECHNICAL SUPPORT For immediate technical support and advice please call +44 (0)345 5050900 Operator lines are from 8.30am to 5.30pm - Monday to Friday 11. DELIVERY SERVICE CHARGES Available on request 12. WARRANTY CLAIM PROCESS (a). Telephone AUTOCLIMATE LIMITED immediately in the case of a failure. (b). Where goods are to be returned AUTOCLIMATE LIMITED Customer Services will issue a GRN which should be marked on the product packaging as instructed. Where inspection is required allow access for a representative of AUTOCLIMATE LIMITED to view and inspect the failed unit / component at an agreed time and prior to any rectification / repair taking place. (c). AUTOCLIMATE LIMITED may also issue a warranty claim form, where issued this must be completed as fully as possible to enable a valid claim including all part numbers, procedures and labour operations. (d). Any replacement parts required will be charged in full and only credited in the event of a valid warranty claim. (e). You must send to AUTOCLIMATE LIMITED: (i) Fully completed warranty claim form (where requested) (ii) Copy of the vehicle rectification job card (where applicable) (iii) Copy of the vehicles most recent service job card (where applicable) (iv) All failed / damaged components (with valid GRN marked as indicated) 13. CLAIM REIMBURSEMENT PROCEDURE (a) On receipt of the claim, the failed goods will be inspected and analysed. (b) The claim will be PASSED or REJECTED by the warranty claim department within 60 days of receipt. (c) IF PASSED - A credit note or a letter of acceptance will be raised covering the costs of failed items and labour (if applicable). Any letter of acceptance will include an official AUTOCLIMATE LIMITED warranty Order Number. You should include this on all documentation for invoicing / remittance purposes. (d) IF REJECTED You will be notified and a further explanation is available on request (e) AUTOCLIMATE LIMITED will not accept any invoice or claim in respect to any and all warranty claims which does not quote an official AUTOCLIMATE LIMITED warranty Order Number. 14. WARRANTY REPAIR MENU A Labour refund rate: 24.00 per hour ( 0.40 per minute) 15. LAW & JURISDICTION This contract shall be governed by and construed in accordance with English Law and the parties submit to the exclusive jurisdiction of the English Courts. 6. RETENTION OF TITLE (a). All goods shall remain the property of AUTOCLIMATE LIMITED until paid for in full. 6. Damage caused by poor / incorrect fitting or removal or any other work being carried out. ISO Ref: FTD-05-245-KG12 Document Ref: GT&CS V.01.01 June 2012 66

Autoclimate also supply 95 % Original Equipment Parts 100 % ON LIGHTING TM autoclimate