Windows, French doors, folding windows, terrace doors SFB 1074 with low U-values SFB 1074 is available in two versions. In the first version the profiles are insulated with 30 mm glass fibre reinforced polyamide strips. In the second version the profiles are insulated by inserting further insulation in the form of cellular plastic between the thermal break. The cellular plastic insulation improves the U-value by 0.3 W/m 2 K over the profile section. We recommend a low U-value system for places with high humidity, such as kitchens, bathrooms and swimming pools. The location of the window in a wall is very important for high surface temperatures of the profiles. The window should always be placed in the warmest part of a wall in order to eliminate thermal bridges. The temperature distribution over window profiles is calculated theoretically with the use of FRAME4 software. -15 C +20 C -6-4 -2 0 2 4 6 8 10 12 14 F-13
Windows, French doors, inward opening SFB 1074 Our window system SFB 1074 is innovative in its design. We have made a great effort to obtain an energy effective system. The future requirements regarding the economical use of energy and environment protection are going to dominate in the construction sector. With the SFB 1074 system we get a low U-value and high air tightness in all products. The first striking feature of SFB 1074 is the symmetric design of the system. A thermal break made of glass fibre reinforced polyamide is placed in the middle and it is surrounded on both sides by profiles with symmetric chambers and grooves. SFB 1074 has a low U-value over the profile section including the glass. Double or triple glazing units, as well as infill panels up to 54 mm can be installed in the rebate. Windows, French doors, folding windows, and terrace doors SFB 1074 fulfil the requirements as regards air and water tightness as well as wind load resistance according to SS-EN 12208, 12207 and 12210. The window system profiles can be anodised, powder coated or coated using the Decoral method with various colours and types of surface finish on the inside and on the outside. Surface finish: see chapter M. F-14
Principle details SFB 1074 windows, French doors Different combinations of frame and sash profiles are possible in inward opening SFB 1074 windows. Sash profiles for inward opening French doors are available in two versions: one for side-hung fittings (Fix) and one for tilt-and-turn fittings. Functions of fittings: see page F-30. The sash profiles can also be installed in the facade systems SFB 3074, 4150, 4060, and 5050 SG, see chapter D. SFB 1074 is used for single windows, windows with top light, windows with side light, or in window elements/ glazed elements. The size of windows: max. height 2100 mm, max. width 1550 mm, min. height 500 mm, min. width 450 mm, and max. weight of sash 100 kg. Fixed window Inward opening window Inward opening window with arched top light Opening window with fixed middle post, or without post Inward opening French door Frame/sash combinations in inward opening windows 87 5 30 94,5 5 37,5 109,5 5,5 Frame Frame/narrow sash Infill panels in window sashes Frame/medium sash Karm/stor båge Båge till fönsterdörr 131 Sash, Vaku-Paneel infill panel, see page F-38 Sash with F1, F2, F3, F4 infill panel, see page F-38 Meeting window without middle post F-15
Windows, inward opening, in light walls SFB 1074 The SFB 1074 window system has been extended with a frame suitable for rational installation in light wall structures, consisting of sheet plate and insulation material. The frame has a rebate against the outside wall surface and is fixed with hidden fittings from the inside. The inside is complemented with an encasement made of special aluminium profiles. SFB 1074 has a low U-value over the profile section including the glass. Double or triple glazing units, as well as infill panels up to 54 mm can be installed in the rebate. Windows and window groups SFB 1074 fulfil the requirements as regards air and water tightness as well as wind load resistance according to SS-EN 12208, 12207 and 12210. The window system profiles can be anodised (natural and Hardoxal colours), powder coated (NCS-S and RAL) or coated using the effective Decoral method with various patterns. F-16
Principle details SFB 1074 windows in light walls Windows and window groups can be made as fixed or opening units, or mixed. The frame profile is always the same, while the encasement profiles used on the inside are adjusted to the wall thickness (3 different values) and the sash profile is selected according to the size, weight and function of the fittings. Inward opening windows are available in the following versions: sidehung, bottom-hung, and top-hung or with tilt-and-turn function. SFB 1074 is used for single windows, windows with top light, windows with side light, or in window elements/glazed elements. Fixed window Inward opening window Window group, opening/fixed Vertical window group, opening/fixed Principle details Frame with sash profile for tilt-and-turn fittings Frame with sash profile for Fix fittings Frame with inside encasement profiles in light wall Side frame with inside encasement profiles in light wall Cross-bar profile Cross-bar with sash profile F-17
Windows, French doors, outward opening, SFB 1074 removal of smoke and evacuation of persons Outward opening windows SFB 1074 have been designed to ensure removal of smoke and appropriate evacuation of persons in the case of fire (National building regulations). Outward opening French doors SFB 1074 with a maximum width of 1200 mm and a height of 2400 mm can be combined with top and side elements. Locking of the French door is ensured by a 3-point casement bolt and a restrictor. The handle can be equipped with a cylinder lock. The outward opening window is based on the same principles as the other windows in our well insulated window system SFB 1074, in which we get a low U-value and high air tightness in all products. A thermal break made of glass fibre reinforced polyamide is placed between symmetric chambers and grooves. The windows and French doors fulfil the requirements as regards air and water tightness as well as wind load resistance according to SS-EN 12208, 12207 and 12210. Window sashes are available in two dimensions. Opening and fixed units can be combined into window elements. Double or triple glazing units, as well as infill panels up to 54 mm can be installed in the rebate. The window and French door system profiles can be anodised, powder coated or coated using the Decoral method with various colours and types of surface finish on the inside and on the outside. Surface finish: see chapter M. F-18
Principle details SFB 1074 windows, French doors, outward opening Different combinations of frame and sash profiles are possible in outward opening SFB 1074 windows. Functions of fittings: Sapa Building System standard outward opening windows SFB 1074 are used for single windows, windows with top light, windows with side light, or in window elements/glazed elements. The sash profiles can be also installed in facade systems SFB 3074, 4150, 4060 and 5050 SG, see chapter D. The size of windows: max. height 2400 mm, max. width 1200 mm, min. height 1800 mm, min. width 700 mm, and max. weight of sash 130 kg. Outward opening windows, with arched top light as a alternative Outward opening windows with fixed side lights, or top light as an alternative Frame/sash combinations in outward opening windows Outward opening French door Outward opening French door with top light, or side light as an alternative Frame with narrow sash Frame with wide sash Infill panels in door leafs Narrow sash in fixed top/side light Wide sash in fixed top/side light 56 135 74 89 79 56 40 96 40 78 118 40 78 118 79 78 157 Door leaf, Vaku-Paneel infill panel, see page F-38 Door leaf with F1, F2, F3, F4 infill panel, see page F-38 Cross-bar Cross-bar F-19
Block windows, inward opening SFB 1074 Inward opening block windows SFB 1074 have been developed to satisfy the market s requirement of a window with a sash that is not visible from the outside. The block window is based on the same principles as our well insulated window system Thermo 74. A thermal break made of glass fibre reinforced polyamide is placed between symmetric chambers and grooves in frame profiles. In order to obtain a hidden sash, the outside glass panel of the glazing unit is stepped and joined with the sash profile. The grooves in the frame and sash profiles are adapted for inward opening fittings, which can provide side bottom and top hung functions, as well as tilt and turn function. Opening and fixed units can be combined into window elements. The rebate in the window sash provides space for double glazing units with stepped outside glass panel, which means that the outside glass panel is wider than the inside glass panel. The windows fulfil the requirements as regards air and water tightness as well as wind load resistance according to SS-EN 12208, 12207 and 12210. The block window system profiles can be anodised, powder coated or coated using the Decoral method with various colours and types of surface finish on the inside and on the outside. Surface finish: see chapter M. F-20
50 5 142 35 Principle details SFB 1074 block windows Different combinations of frame and sash profiles are possible in block windows SFB 1074. For functions of fittings: see page F-30. The sash profiles can be also installed in facade systems SFB 3074, 4150, 4060 and 5050 SG, see chapter D. The sash of block windows is used for single windows, windows with top light, windows with side light, or in window elements/glazed elements. The size of windows: max. height 2100 mm, max. width 1500 mm, min. height 500 mm, min. width 450 mm, and max. weight of sash 100 kg. Inward opening windows Inward opening windows with arched top light Opening window with fixed middle post Opening/fixed window Frame/sash combinations in windows 87 74 109 35 Narrow frame/sash Wide frame/sash 35 74 109 Block window in facade SFB 4050 (SFB 4060, 5050 SG) Opening/fixed window 35 74 35 144 Opening window with fixed middle post F-21
Folding windows/french doors, inward opening SFB 1074 The SFB 1074 folding windows/french doors, in combination with efficient glazing units, provide the possibility to have large open air openings in restaurants, cafés, shops, kiosks, balconies, terraces, and offices. The window profiles have a low U-value over the profile section. The window sashes are interconnected with hinges placed on the inside or on the outside. The window opens by folding the window sashes together on the inside, forming a package next to the window frame. The top edges of the window sashes are installed on rolling fittings and the bottom edges are guided with guide pins. The glass rebates in the window sashes provide space for double or triple glazing units. The folding window/french door system profiles can be anodised, powder coated or coated using the Decoral method with various colours and types of surface finish on the inside and on the outside. Surface finish: see chapter M. F-22
Functions Folding windows/french doors SFB 1074 The window sashes of folding windows/french doors can be 850-2400 mm high and 300-900 mm wide. Total width: 6300 mm with 7 window sashes. Window sash weight: max 80 kg. They can also be combined with fixed windows below the folding window. It is also possible to install horizontal cross-bars for optional marking. The folding windows/french doors are compatible with the SFB 4150 and 4060 facade systems. Number of folding segments: 2, (3, 4, 5, 6) French door Number of folding segments: 3+2, (3+3, 4+3) Number of folding segments: 5, (3, 7) Version with horizontal cross-bar Number of folding segments: 3+2, (3+3, 4+3) Number of folding segments: 5, (3, 7) F-23
Principle details SFB 1074 folding windows/french doors 67 5 124 Frame and window sash with rebate Frame and window sash with hinges Window sashes with hinges on the outside and handle on the inside 5 61 5 175 Window sashes with hinges on the inside 67 124 5 5 185 128 Bottom edge of frame with window sash, guide pin in groove Top edge of frame with window sash, rail with rolling fitting Bottom edge of frame with window sash, guide pin in SFB 4150 facade F-24
Clear dimension SFB 1074 folding windows/french doors Clear dimension (width) when fully opened: Frame outside dimension (2 folding segments + 1 French door) = FOD - 343 mm. Minus 109 mm for each additional folding segment. Folding window depth 350-900 mm Frame outside dimension (3 folding segments) = FOD - 402 mm. Minus 109 mm for each additional folding segment. Clear dimension (height) when fully opened: Frame outside dimension = minus 195 mm. Clear dimension 67 50 109 50 67 Frame outside dimension (FOD) F-25
Terrace doors SFB 1074 sliding terrace doors, inside Terrace doors SFB 1074 with the correct glazing can be used as opening parts in a facade. Terrace doors SFB 1074 are made of the widest sash profiles available in the window system. With sliding door fittings, hidden in the grooves of the profile system, a terrace door with numerous functions is obtained. In the closed position the fixed glass panels are in the same plane as the opening ones. The opening functions are shown in the illustrations below. The terrace doors SFB 1074 fulfil the requirements as regards air and water tightness as well as wind load resistance according to SS-EN 12208, 12207 and 12210. The standard handle is equipped with a lock. Double or triple glazing units, as well as infill panels up to 54 mm can be installed in the rebate. The terrace door system profiles can be anodised, powder coated or coated using the Decoral method with various colours and types of surface finish on the inside and on the outside. Surface finish: see chapter M. Functions of fittings in terrace doors, single-leaf door Terrace door in closed position the glass panels are in the same plane Closed, inside view Ventilation, bottom-hung, inside view Terrace door in ventilating position, bottom-hung, inward opening Open, inside view Terrace doors can be opened completely to the side with the door sliding on rails on the inside in parallel to the fixed part F-26
Terrace doors SFB 1074 sliding terrace doors, fittings Sizes of terrace door-leafs Max. height 2400 mm Max. width 1650 mm Max. height + width 3700 mm Max. weight of door leaf 150 kg Functions of handle on terrace doors Open Fittings in terrace doors SFB 1074 Window system SFB 1074 Closing fittings Handle Glass Surface finish Siegenia PSK-Portal LM Siegenia PSK LM with lock Glazing unit/special glass Anodising/Powder coating Functions of fittings in terrace doors, double-leaf door without fixed middle post Closed Ventilation Handle on the inside of the door Ventilation Handle on the outside of the door Closed Closed, inside view Double-leaf terrace door in closed position Ventilation, bottom-hung, inside view Top edge of terrace door with guide fitting 139 mm in open position Open, inside view Bottom edge of terrace door with fitting F-27