Fittings for Sliding Folding Partition Doors Product Guide

Fittings for Sliding Folding Partition Doors Product Guide Max. door Internal Sliding Folding Partition Doors panel weight Application examples..............................................................................146 Foldaside 240 general purpose end fold system, timber or metal doors.......................36 kg.........147-149 Foldaside 340 for heavy duty end folding partitions, timber or metal doors.....................50 kg.........150-152 Movimento Five for end folding timber partitions......................................15/30 kg............153 Centafold 350 for centre folding heavy weight interior partitions, timber doors..................60 kg.........154-155 HAWA -A for end folding timber partitions, with rebated head facility........................45 kg.........156-157 HAWA 21-A for centre folding timber partitions..........................................45 kg.........158-159 HAWA-Variofold 80/H for heavy duty end folding timber partitions...........................80 kg.........160-161 HAWA-Centrefold 80/H for heavy duty centre folding timber partitions.......................80 kg.........162-163 Max. door External Sliding Folding Partition Doors panel weight HAWA-Frontfold.............................................................. kg.........165-166 Series 300 top track brackets for Foldaside 310, Centafold 350 and Cornaway 310.............................167 Foldaside 310 folding and sliding door gear for commercial and residential applications............................... with rebated head facility...........................................................50 kg.........168-169 Foldaside 310 industrial folding sliding door gear with rebated head facility...................55 kg.........170-171 Cornaway 310 for doors sliding to side wall - garage door applications.......................50 kg.........172-173 Häfele Centor E3 System for folding external partition doors..............................80 kg.........174-179 Häfele Centor E4 System........................................................1 kg............180 HAWA -C extra heavy duty, for low headroom folding doors with rebated head facility.........1 kg.........168-170 HAWA -A for top hung internal end folding partitions with access door Häfele Centor E3 for folding external partition doors Bottom rolling systems for interior and exterior sliding folding partition doors; product guide page 183 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 141

Fittings for Sliding Folding Partition Doors Suggested Additional Fittings Note: This selection represents every type of ironmongery item that could be required for a sliding folding partition. Individual applications will require individual combinations of items depending on individual design requirements. Door holders: Section 4, from page 67 Continuous hinges: Section 3, pages 51-52 Hold back catches: page 149 Locks and latches: Section 2 Pull handles: Section 1 Butt hinges: Section 3 Flush bolts: Section 4 pages 19-27 Flush handles: Section 4 from page 75 Seals: page 6 Case studies: pages 143-145 Section 142 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Partition Doors Case Studies System: Foldaside 310 (see pages 168-171) Important: Keep all fittings flush faced as leaves fold onto one another Head sealing A Use 950.07.379 mounted on the recieving frame under face. Timber soffit batten may be necessary. The folding leaves will close against the brush filaments. Benefit is doors closing onto a continuous seal. In applications with notched/rebated head, seal may be achieved with blade seal - see Section 4 pages 122-126 Blade seal B Option: Use 950.07.269 (or 950.07.389 depending upon clearance from door head to bracket batten) morticed into head of door at centre. Filaments will seal on under edge of batten. C Possible alternative is to use 950.07.369 inverted and face morticed into top edge of closing side of door with filaments sealing to bottom of bracket batten Bottom sealing D Use 950.07.269 morticed into door bottom but offset to clear flush bolt heal return (alternatively, if centrally morticed it will be necessary to break the line of seal at this point). Brush filaments seal onto floor face F Vertical joint sealing E Alternative is to use 950.07.369 inverted and face morticed into bottom edge of door so that filaments seal onto face of floor Sealing at hinge locations between leaves - vertical joints F Use blade seal at rebate on leaves and hanging stile - see Section 4 pages 122-126 Blade seal Head sealing A Head sealing B Head sealing C 950.07.379 45º brush seal 950.07.269 Brush seal Bottom sealing D 950.07.269 Brush sealoffset to clear flush bolt heal 950.07.269/950.07.389 Brush seal 950.07.369 Brush sealinverted flush face morticed Bottom sealing E 950.07.369 (or 950.07.279) Brush sealinverted and flush face mortice fitted Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 143

Fittings for Sliding Folding Partition Doors Case Studies System: Foldaside 640 (see pages 186-187) Interior doors only - very sheltered area examples Important: Keep all fittings flush faced as leaves fold onto one another Head sealing A Use 950.07.379 fitted to the header soffit trim on the closing side with filaments to the door face B Alternative is to use 950.07.369 inverted and face fixed onto top edge of opening side of door with filaments sealing to soffit trim underface C Option: Use 950.07.269 morticed into head of door, offset from centre. Would need to be stopped short because of the top roller guide bracket so full length seal not possible with this option Bulb seal, used where joinery gaps are 3-6 mm F Vertical joint sealing Blade seal, used where joinery gaps are 1.5-4 mm Bottom sealing D Use 950.07.269 morticed into door bottom but offset from centre by 12-13 mm to seal filaments onto top face of bottom track E Alternative is to use 950.07.369 inverted and face morticed into bottom edge of door so that filaments seal onto face of floor/cill Note: Because of the size of the bottom roller housing with this gear, whichever seal option is used, it will have to stop short at the roller housing and therefore full width door sealing is not possible. For every pivot/roller housing deployed, 45 mm will be unsealable Sealing at hinge locations between leaves - vertical joints F Use blade seal at rebate on leaves and hanging stile - see Section 4 pages 122-126 Head sealing A Head sealing B Head sealing C 950.07.369 Brush sealinverted and flush face morticed N.B. Cut short at roller housing Bottom sealing E 950.07.379 45º brush seal 950.07.369 Brush seal 950.07.369 Brush seal Bottom sealing D 950.07.269 Brush seal Section 144 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Partition Doors Case Studies System: Foldaside 866 (see pages 184-185) Note: Rebated frame set. Doors close home on rebate at all perimeters Simplest and invisible seal would be use of blade seal for all perimeter frame rebate gaps of up to 3 mm, (or bulb seal if gaps are over 3-6 mm) - see Section 4 page 122-126 Alternative for the head and side jambs would be use of 950.07.399. Brush filaments would seal onto closing face of door leaves. This option is visible. In very exposed areas (i.e. cliff-top penthouse balcony doors) the use of both the above options may prove beneficial Additional external bottom seal can be provided as a draught and rain deflector by fitting surface brush seal 950.07.399 to seal onto cill threshold. Necessary to trim to avoid bottom roller housing Stop Door Frame jamb Sealing at hinge locations between leaves Use blade seal at all rebates (or bulb seal if gaps are over 3 mm) - see Section 4 pages 122-126 Stop Frame jamb Door Blade seal Bulb seal- N.B. Use bulb seal when gaps are large i.e. 3-6 mm Frame perimeter seal may be used in place of or in addition to the bulb or blade seal 950.07.399 35º brush seal blade seal or bulb seal 950.07.399 35º brush seal- Use in conjunction with bulb or blade seal on rebate/ stop face Blade seal Frame perimeter seal may be used in place of or in addition to the bulb or blade seal blade seal or bulb seal 950.07.399 35º brush seal 950.07.379 45º brush seal Bulb seal- Option: Where joinery clearance is wide i.e. gaps 3-6 mm use bulb seal blade seal or bulb seal Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 145

Fittings for Sliding Folding Interior Doors Application Examples Centafold 350 for centre folding heavy weight interior partitions HAWA -A for top hung internal end folding partitions with access door HAWA-Variofold 80/H for heavy duty end folding timber partitions Foldaside 310 for top hung internal or external doors Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Architectural Ironmongery Sales and Support: Telephone: 01788 548855 (all regions) Telephone: 08 418 2435 (London region) CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or e-mail cpd@hafele.co.uk Top hung systems for exterior sliding folding partition doors; from page 164 Bottom rolling systems for interior and exterior sliding folding partition doors; product guide page 183 Section 146 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors Foldaside 240 Endfold Application: Top hung internal end folding partitions, timber or metal doors. For residential and light commercial applications. No rebatedhead facility Range: Max. door weight 36 kg Max. door height 2.4 m Max. door leaf width 800 mm Up to 8 leaves may be hinged together. Loose or floating suites of door leaves are not recommended Door construction: Door thickness 30 to 44 mm. When swing leaves hinged to folding suites reduce door leaf widths to 700 mm and use four wheel hangers adjoining swing leaf. Fixing: Track brackets usually soffit fixed. Additional brackets required where doors stack. All hangers have vertical adjustment. Floor channel unnecessary under swing leaves. Trolley hangers and bottom guiding are shown on page 148 Brackets for securing top track, side and soffit fixing are shown in detail below Series 0 System top track brackets - Selection Guide 1 - Closed end brackets should be fitted at both ends of each track run 2 - Lock joint brackets should be fitted at each track joint 3 - An additional open bracket should be fitted at all points on the track where the doors stack open 4 - Brackets should be positioned at 600-900 mm centre intervals along the track Examples 2 m length of track - single stacking area C O O C 3 m length of track - single stacking area C O O O C 2 x 3 m lengths of track - single stacking area C O O O L O O O C Note: This is a guide only If very heavy or large numbers of panels are proposed, additional brackets may be required - Please contact the Architectural Ironmongery Department for further assistance Key O = Open bracket C = Closed end bracket L = Lock joint bracket S = Stacking area bracket For ancillary door fittings, hinges and locks etc, see page 142 A Top track, 45 x 37 mm Galvanized steel (1.6 mm gauge) to BS EN 10142 Length 2.1 m 942.51.921 3.0 m 942.51.930 (2.1 or 3.0 m length) A 45 37 92 Ø 10 B 16 Open bracket with closed end piece Closed end piece Side fixing brackets: B Side fixing bracket Open. For closed end piece use item E below. Galvanized pressed steel Cat. No 942.51.080 (see selection guide for quantity) C Lock joint plate To convert B to lock joint bracket. Can be used on all brackets if extreme rigidity required. Galvanized pressed steel Cat. No 942.51.082 (see selection guide for quantity) Soffit fixing brackets: D Soffit fixing bracket Open. For parallel and cross ear applications. Galvanized pressed steel Cat. No 942.51.083 (see selection guide for quantity) E Closed end piece To convert B or D to closed end bracket. Unhanded. Galvanized pressed steel Cat. No 942.51.084 Order qty: 1 pair (see selection guide for quantity) F Soffit bracket lock-joint type Caution: Do not over tighten set screws. Galvanized pressed steel Cat. No 942.51.085 (see selection guide for quantity) 35 47 C E 35 47 E 40 83 70 40 90 45 45 70 51 50 Ø 8 Open bracket with lock-joint plate 90 D 45 45 51 Ø 8 F 49 Track Lock-joint plate Track Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 147

Fittings for Sliding Folding Interior Doors Foldaside 240 Endfold Important: Where the jamb to first leaf joint is hinged with butt hinges, the first leaf must be narrower in width than the other leaves in the suite. The dimension is A or B shown below. 3, 5 or 7 leaves one way incorporating access door 29 B For further assistance please call technical support A = 1/2 door thickness + 29 mm + 1/2 hinge knuckle diameter + X, X = Rebate depth B = 1/2 door thickness + 29 mm + 1/2 hinge knuckle diameter Example: To find B, where door = 44 mm thick and hinge knuckle diameter = 12 mm B = 22 + 29 + 6 = 57 mm Boxed jamb 6 41 41 X 29 Flush handle 2 wheel hanger 2, 4, 6 or 8 leaves one or both ways A 4 wheel hanger Flush handle with roller catch or flush ring handles with mortice lock 6 6 3 Foldaside hinge Holdback catch Flush handle Flush bolt position Brackets for securing top track are shown on page 147 For ancillary door fittings, hinges and locks etc, see page 142 Soffit bracket Suggested head detail only 70 Ø38 29 A 26 6 2 A Trolley hanger with 2 wheels Alternate with 4 wheel hanger. All steel, ball bearing lubricated for life Cat. No 943..010 3 96 Ø38 B 26 6 154 29 2 B Trolley hanger with 4 wheels Alternate with 2 wheel hanger. Use next to access door. All steel, ball bearing lubricated for life Cat. No 943..0 35 suggested door thickness 13 29 154 C Door guide Medium duty. Steel angle plate fits rebate of doors. Brass roller Cat. No 943..030 D Channel, x mm To suit guide C. Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 942.51.721 3.0 m 942.51.730 (2.1 or 3.0 m length) Alternative bottom guiding for light duty applications only E Door guide Light duty. Steel angle fits rebate of door. Nylon swivel Cat. No 943..031 F Channel, 12 x 15 mm To suit guide E. Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 409.14.010 3.0 m 409.14.029 (2.1 or 3.0 m length) 6 6 30 13 24 90 13 154 C Ø16 E 24 152 128 13 29 24 5 30 6 D F 15 12 Section 148 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors Foldaside 240 Endfold Foldaside butt hinges for door thickness 30-40 mm: A Stainless steel butt hinge 76 x 50 mm. Fixing screws included. Un-washered with stainless steel fixed spun pin Max. adj. door weight kg Satin 921.08.104 B Brass butt hinge 76 x 51 mm. Un-washered with brass hinge Cat. No Self colour 921.08.408 C Extruded brass butt hinge 76 x 51 mm. Double phosphor bronze washers with brass pin BS EN 1935 grade 6 Cat. No Polished 926.90.058 Ø 8 76 50 3 A Ø 10 76 Ø 8 51 3 B 4.0 Ø 12 For ancillary door fittings, hinges and locks etc, see page 142 76 Ø 8 51 3 C 4.0 Foldaside butt hinges for door thickness 40-45 mm: D Stainless steel butt hinge x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 E Stainless steel butt hinge x 76 mm. Drilled ANSI pattern. Two high quality ball bearing race joints. Stainless steel BS EN 1935 grade Satin stainless steel 926.92.100 Polished stainless steel 921.08.621 Order qty: Multiples of 2 pcs F Brass butt hinge x 73 mm. Unwashered with stainless steel pin Max. adj. door weight 35 kg Bright polished 921.08.024 G Jamb and floor pivot set For equal width door suites Important: If all door leaves in the suite must be equal width, this fitting may be used for the jamb to first leaf joint, but recommended max. load rating must be strictly adhered to This pivot set may also be used with Foldaside 340 but max. door weight 40 kg Top, jamb fixing. Bottom, floor mounted. Steel Cat. No 941.36.000 H Knob slide surface bolt, light duty, 160 mm Surface or semi-recessed fixing to bottom of door. Straight and angled keepers included. Brass Cat. No Polished brass 900.17.945 Satin nickel plated 900.17.946 F Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 F 2.5 6 13 26 32 76 Ø 26 Counterpiece 30 42 2.5 12 D 4.0 13 15.5 57 70 Nickel-plated illustration 153 3.5 82 Catch G 153 2.5 F 13 76 E 5.0 Ø 26 Jamb point Floor pivot Counterpiece 30 41 2 Retractable 128 12 32 56 70 26 3.5 15 Catch Bright brass illustration 5 Ø 10 8 6 73 F 29R H 3.0 5.0 Flush handle 2 wheel hanger 29 160 15 13 29 5 17 Ø 8 2 1 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 149

Fittings for Sliding Folding Interior Doors Foldaside 340 Endfold For top hung end folding partitions-timber or metal doors - robust usage Application: Top hung, internal folding doors with concealed fittings. For domestic, residential and commercial applications. For odd or even number suites Range Max. weight per door leaf 50 kg Max. door height 3.3 m Max. opening width 14.4 m Max. door leaf width 900 mm Door thickness 40-55 mm Door construction: Up to eight leaves may be hinged together. No rebated head facility. Swing leaves are best hinged to jambs. When hinged to folding suites reduce door width to 800 mm Fixing: Track brackets usually soffit fixed. Additional brackets required where doors stack. All trolley hangers have vertical adjustment. Floor channel unnecessary under swing leaves. To prevent wheels clashing in track when open, position 2 and 4 wheel trolley hangers alternately Series 300 System top track brackets - Selection Guide 1 - Closed end brackets should be fitted at both ends of each track run 2 - Lock joint brackets should be fitted at each track joint 3 - An additional open bracket should be fitted at all points on the track where the doors stack open 4 - Brackets should be positioned at 600-900 mm centre intervals along the track 2 m length of track - single stacking area C O O O C S 3 m length of track - single stacking area C O O O O C S 2 x 3 m lengths of track - single stacking area C O O O O L O O O O C S S Note: This is a guide only If very heavy or large numbers of panels are proposed, additional brackets may be required - Please contact the Architectural Ironmongery Department Key O = Open bracket C = Closed end bracket L = Lock joint bracket S = Stacking area bracket A Top track, 63 x 48 mm 2 mm wall thickness. Galvanized steel to BS EN 10142 Length 2.1 m 942.52.921 3.0 m 942.52.930 (2.1 or 3.0 m length) B Top track, 63 x 48 mm 2.5 mm wall thickness. Galvanized steel to BS2989. Use of this heavier track increases maximum door weight to 60 kg provided adequate track support brackets are used Length 3.0 m 942.52.830 (3.0 m length) 48 63 A 2 mm wall thickness C Ø 12 63 48 B 2.5 mm wall thickness Open bracket with closed end piece Single track fixing brackets: 121 19 Closed end piece C Side fixing bracket Open. For closed end piece use item F below. Galvanized pressed steel 942.52.080 (see selection guide for quantity) D Lock-joint plate To convert C to lock-joint bracket. Can be used on all brackets if extreme rigidity required. Galvanized pressed steel 942.52.082 (see selection guide for quantity) Universal soffit fixing brackets: E Soffit fixing bracket Open. For parallel and cross ear applications. Galvanized pressed steel 942.52.083 (see selection guide for quantity) F Closed end piece To convert C or E to closed end bracket. Unhanded. Galvanized pressed steel 942.52.084 Order qty: 1 pair (see selection guide for quantity) G Soffit bracket, lock-joint type Caution: Do not over-tighten set screws. Galvanized pressed steel 942.52.085 (see selection guide for quantity) D 22 51 F 48 94 94 50 35 67 5 58 57 70 E Ø 10 94 Open bracket with lock-joint plate 5 60 58 57 Track Lock-joint plate 70 Track Ø 10 G Section 150 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors Foldaside 340 Endfold Important: Where the jamb to first leaf joint is hinged with butt hinges, the first leaf must be narrower in width than the other leaves in the suite. The dimension is A or B shown below For further assistance call technical support 6 41 41 Flush handle 2 wheel hanger X 29 B Example of boxed jamb for even suites of doors hinged to jamb 29 3, 5 or 7 leaves one way 4 wheel hanger A A = 1/2 door thickness + 29 mm + 1/2 hinge knuckle diameter + X X = Rebate depth B = 1/2 door thickness + 29 mm + 1/2 hinge knuckle diameter 2, 4, 6 or 8 leaves one or both ways Flush handle with roller catch or flush ring handles with mortice lock 6 6 3 Example: To find B where door = 44 mm thick and hinge knuckle diameter = 12 mm B = 22 + 29 + 6 = 57 mm Holdback catch Foldaside hinge Flush handle Hangers Four wheel Two wheel Hinges Suggested head detail only 30 Flush handles Roller catch and lock Two coachscrews Ø 10 mm at 5 centres 95 A 2 Flush bolts Guides Channel For ancillary door fittings, hinges and locks etc, see page 142 32 3 Vertical adjustment 154 B 30 A Two wheel trolley hanger Alternate with 4 wheel hanger. All steel, ball bearing lubricated for life Cat. No 943.22.010 44 Suggested door thickness Ø hole 60 mm deep in top of door to accommodate pendant bolt Guides must be plumb with hangers 2 B Four wheel trolley hanger Alternate with 2 wheel hanger. Always use adjacent to access door. All steel, ball bearing lubricated for life Cat. No 943.22.0 C Door guide Heavy duty. Steel angle plate fits rebate of doors. Brass roller Cat. No 943..030 D Channel, x mm Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 942.51.721 3.0 m 942.51.730 (2.1 or 3.0 m length) E Channel, x mm Pre-drilled for countersunk screws. Recommended for use where open threshold subject to heavy foot traffic i.e. school assembly halls. Stainless steel Length 2.5 m 943.26.9 (2.5 m length) F Channel, 22 x 22 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 943.23.921 3.0 m 943.23.930 (2.1 or 3.0 m length) 6 30 F D E 3 22 18 22 90 Ø16 C 152 154 30 6 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 151

Fittings for Sliding Folding Interior Doors Foldaside 340 Endfold Foldaside butt hinges for extra heavy duty usage, door thickness 44 mm+: A Brass DPBW butt hinge x 76 mm. Phosphor bronze washers with brass pin. Polished brass Max. adj. door weight 60 kg Polished brass 921.08.042 Ø Ø 10 B Stainless steel butt hinges x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 C Stainless steel butt hinge x 76 mm. Drilled ANSI pattern. Two high quality ball bearing race joints. Stainless steel BS EN 1935 grade Satin stainless steel 926.92.100 Polished stainless steel 921.08.621 Order qty: Multiples of 2 pcs D Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 D 4 A 76 Counterpiece 30 42 2.5 12 5.0 13 15.5 57 70 Nickel-plated illustration 3.5 Catch 2.5 D 76 B 4.0 Counterpiece 30 41 2 12 3.5 56 70 15 Catch Bright brass illustration 2.5 Ø 12 76 C 5.0 E Cabin hook Alternative to twin ball catch. Fixing screws included. Brass Polished brass 938.13.008 Satin chrome 938.13.004 Polished chrome 938.13.002 F Lever action flush bolt For folding doors. Door thickness 45 mm+. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 G Flush handle Normal usage. Fixing screws included. Brass Satin nickel-plated 910.37.044 Polished brass 910.37.035 H Flush handle Heavy duty usage. Normally used where door thickness is 50 mm or more. Fixing screws included. Brass Satin nickel-plated 910.37.062 Polished brass 910.37.071 I Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 F 35 8 19 13 38 229 37 18 95 28 E 51.5 64 6 H 4 3 13 41 28 0 19 G 68 89 3 60 152 132 I Section 152 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors Movimento Five Endfold Application: Top hung endfold door gear for timber partitions. Light to medium duty domestic or commercial applications involving suites of up to four panels. Economical system and therefore suitable for price conscious applications or multiple application projects. Fixed top tracks and low profile bottom guide channel make the system ideal for disabled use, particularly where wheelchair access is necessary Range: Max. door weight Min. door thickness Max. door height Max. door width 30 kg (for 2 doors) 15 kg each (for 4 door suites) - 40 mm 00 mm 800 mm 27 31 B 54 A Movimento top track With screw holes. Anodised aluminium 31 Length 2.0 m 940.66.8 2.5 m 940.66.8 3.0 m 940.66.830 (2.0, 2.5 or 3.0 m length) 70 27 A B Trolley hanger High performance rollers. Metal alloy body. Plastic wheels with ground shielded ball bearings. Height adjustment of 10 mm 943.36.012 C D C Track stopper For adjustable mounting in top track B 943.36.042 D Pivot set for folding doors Comprises of: 1 x Lower retainer bracket 1 x Upper retainer pin 1 x Upper clamp pin 2 x Upper/Lower support plates 943.36.0 Order qty: 1 set E Lower runner Aluminium 943.36.035 F Bottom track Aluminium Length 2.0 m 943.37.8 2.5 m 943.37.8 3.0 m 943.37.830 (2.0, 2.5 or 3.0 m length) D F B D 70 13 F D Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 153

Fittings for Sliding Folding Interior Doors Centafold 350 Application: Top hung, heavy duty, internal Suggested head detail only centre folding doors. For openings without rebated heads or cills. Ideal for domestic, residential and commercial applications Range Max. door weight 60 kg Max. door height 3.3 m Max. opening width unlimited Max. door leaf width 1.2 m Door thickness 40-55 mm Door construction: Normally up to 7 1 /2 leaves 94 may be hinged together. Loose floating suites of 5 and 7 leaves may be used with caution, but access doors are not recommended. Width of door leaves vary according to arrangements, refer to drawing for details. The half leaf is always 32 hinged to jamb. Always engage holdback catch before operating Vertical Important: Swing access leaves on floating 3 adjustment folding suites are particularly not Ø mm hole recommended If unavoidable, leaf widths 60 mm deep in must not exceed 800 mm top of door to accommodate Fixing: Universal track brackets usually soffit pendant bolt fixed. Additional brackets required where doors 44 fold. Hangers have vertical adjustment. Floor channel unnecessary under swing leaves Suggested door thickness 38 Hangers 2 wheel and 4 wheel trolley hangers must alternate to avoid wheels clashing in track when partition open. 4 wheel hanger must be sited next to access door if applicable Two coachscrews Ø 10 mm at Ø 5 mm centres Removable lining both sides Track Universal soffite bracket 2 wheel or 4 wheel hanger A 63 48 For ancillary door fittings, hinges and locks etc, see page 142 A Top track, 63 x 48 mm Galvanized steel to BSEN 10142 Length 2.1 m 942.52.921 3.0 m 942.52.930 (2.1 or 3.0 m length) B Two wheel trolley hanger All steel, ball bearing lubricated for life 943.24.010 40 Ø54 260 B Ø 54 6 127 38 C 6 C Four wheel trolley hanger All steel, ball bearing lubricated for life 943.24.0 Heavy duty guiding with aluminium, stainless steel or brass bottom channel options: D Guide Zinc-plated steel with brass roller 930.10.000 E Channel, x mm Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 942.51.721 3.0 m 942.51.730 (2.1 or 3.0 m length) F Channel, x mm Pre-drilled for countersunk screws. Recommended for use where open threshold subject to heavy foot traffic i.e. school assembly halls. Stainless steel Length 2.5 m 943.26.9 (2.5 m length) G Channel, 22 x 22 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 943.23.921 3.0 m 943.23.930 (2.1 or 3.0 m length) 30 3 F 5 27 40 130 Ø 16 E 22 G 260 30 5 D 18 22 Soffit fixing brackets for securing top track are shown on page 150 Section 154 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors Centrefold 350 IMPORTANT Dim A = Half door thickness + half hinge barrel thickness Example for 44 mm door: 22 + 3 = mm (with hinge with 6 mm barrel Hinges Hangers 4 wheel 2 wheel Where no access panel, arrange bi-parting doors so that rebates swing into each other. This is controlled by hinging half leaf right or left as required Flush handle without swing door Hanger 4 wheel Dim. A* Hanger 4 wheel Foldaside hinge Dim A* Flush bolts Flush handles Guides Channel A typical application: five and a half leaves folding one way, half leaf hinged to jamb When using swing Holdback/ball doors engage catch holdback catch before operating partition Including swing door where door width reduced to 800 mm maximum 6 Foldaside hinge Half leaf 3 Flush handle and flush bolt Caution see rebate detail above for bi-parting suites 6 Foldaside hinge Half leaf 2 1/2, 4 1/2, 6 1/2, leaves or 1 1/2, 3 1/2, 5 1/2, 7 1/2 leaves without swing door 3 Flush handle and flush bolt For ancillary door fittings, hinges and locks etc, see page 142 Foldaside butt hinges for panel to panel joints where door thickness 44 to 57 mm: Ø A Brass DPBW butt hinge x 76 mm. Phosphor bronze washers with brass pin. Polished brass Max. adj. door weight 60 kg Polished brass 921.08.042 B Stainless steel butt hinges x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 C Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 D Lever action flush bolt For folding doors. Door thickness 45 mm+. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 E Flush handle Fixing screws included. Brass Satin nickel-plated 910.37.044 Polished brass 910.37.035 F Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 C D 35 8 19 Counterpiece 30 42 2.5 12 4 13 38 13 A 15.5 229 76 57 70 Nickel-plated illustration 3.5 5.0 Catch C Counterpiece 30 41 13 2 41 28 3 2.5 E Ø 10 12 68 89 76 B 4.0 3.5 56 70 15 Catch Bright brass illustration 0 19 60 152 132 F Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 155

Fittings for Sliding Folding Interior Doors HAWA -A Endfold Hawa Application: For high quality applications requiring top hung internal end fold timber partitions. Suitable for suites involving odd numbers of doors only (i.e an access door is included). Domestic, residential and commercial applications possible. Includes a rebated head facility - enabling a sound reduction seal to be fitted to the head, if applicable Possible option for folding windows Range Recommended door thickness: Not usually less than 40 mm Max. door panel width 850 mm Max. door panel weight 45 kg Door panels secured either by flush bolt or dead bolt lock Installation drawing reference 12397 Suggested head detail only Rubber rebated head seal (by others) 35 28 Line of cut-out 30 18 160 175 For ancillary door fittings, hinges and locks etc, see page 142 5 A Top track With screw holes for soffit fixing. Brass 60 Length 2.5 m 942.22.0 3.5 m 942.22.350 (2.5 or 3.5 m length) 4.5 B Trolley hanger unit Spring loaded for smoother folding action. Vertically adjustable. Steel rollers with self lubricating bearings 407.49.022 A 35 13 160 B Important: Where the jamb to first leaf joint is hinged with butt hinges, the first leaf must be narrower in width than the other leaves in the suite. The dimension A, shown on the opposite page, is critical. For further assistance call technical support C Guide Medium duty to suit channel D or E. Steel with nylon pilot 407.66.916 D Channel, x mm Pre-drilled for countersunk screws. Brass Length 2.0 m 407.66.827 3.0 m 407.66.836 (2.0 or 3.0 m length) E Channel, x mm Pre-drilled for countersunk screws. Anodised aluminium Length 2.5 m 940.41.0 3.5 m 940.41.350 (2.5 or 3.5 m length) 10 C 18 6 5 135 D E Section 156 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors HAWA -A Endfold Hawa 4 A Cut out from adjoining door to accommodate extended trolley and also bottom guide Folding door hinge X Position of flush pulls / flush bolts if required IMPORTANT: dimension A Drawing ref 13356 must be used to calculate Dim A - available on request For ancillary door fittings, hinges and locks etc, see page 142 Example of door configurations using HAWA -A, showing odd leaf (access door) Deadbolt locking system, for use instead of flush bolt. Order deadbolt lock A, sleeve B and allen key C separately. A Concealed deadbolt lock Medium duty. Ø 13 mm bolt. 18 mm throw. Galvanized steel 407.49.924 40 9 A 60 44 29.5 B B Lock access sleeve Nickel-plated brass 407.49.184 C Allen key For deadbolt lock 407.49.193 Foldaside butt hinges, all joints, for door thickness 40-45 mm: D Brass DPBW butt hinge x 76 mm. Phosphor bronze washers with brass pin. Polished brass Max. adj. door weight 60 kg Polished brass 921.08.042 E Stainless steel butt hinge x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 27 18 30 4 7 10 Ø D 76 5.0 51 3 109 Ø inner 104 Ø 13 mm bolt 18 mm throw 2.5 Ø 10 76 E 4.0 C Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 157

Fittings for Sliding Folding Interior Doors HAWA 21-A Centrefold Hawa Application: To suit high quality top hung centre folding internal timber partitions Range Min. recommended door thickness 30 mm Max. door panel width 900 mm Max. door panel weight 45 kg Suggested head detail only 35 4.5 For ancillary door fittings, hinges and locks etc, see page 142 A Top track, 35 x mm With screw holes for soffit fixing. Brass Length 2.5 m 942.22.0 3.5 m 942.22.350 (2.5 or 3.5 m length) 35 5 B 58 A 35 13 23 0 B Trolley hanger unit Steel 407.49.013 C 50 C Guide, medium duty Steel with nylon pilot 407.49.1 5 10 28 D Channel, x mm Pre-drilled for countersunk screws. Brass Length 2.0 m 407.66.827 3.0 m 407.66.836 (2.0 or 3.0 m length) E Channel, x mm Pre-drilled for countersunk screws. Anodised aluminium Length 2.5 m 940.41.0 3.5 m 940.41.350 (2.5 or 3.5 m length) Deadbolt locking system, for use instead of flush bolt. Order deadbolt lock F, sleeve G and allen key H separately F Concealed deadbolt lock Medium duty. Galvanized steel 407.49.924 G Lock access sleeve Nickel-plated brass 407.49.184 H Allen key For deadbolt lock 407.49.193 27 40 9 18 30 7 10 F 51 3 109 Ø inner E D 60 104 44 29.5 Ø 13 mm bolt 18 mm throw G H Section 158 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Interior Doors HAWA 21-A Centrefold Hawa Examples of various door configurations using HAWA 21-A Caution: Arrange bi-parting doors so that rebates swing into each other. This is controlled by hinging half leaf right or left as required For ancillary door fittings, hinges and locks etc, see page 142 Foldaside butt hinges for door thickness 30-40 mm: A Brass butt hinge 76 x 51 mm. Unwashered with brass pin Self colour 921.08.408 Ø 8 4.0 B Extruded brass butt hinge 76 x 51 mm. Double phosphor bronze washers with brass pin BS EN 1935 grade 6 Polished 926.90.058 C Stainless steel butt hinge 76 x 50 mm. Unwashered with stainless steel fixed spun pin Max. adj. door weight 60 kg Satin 921.08.104 Foldaside butt hinges for door thickness 40 mm+: D Brass DPBW butt hinge x 76 mm. Phosphor bronze washers with brass pin. Polished brass Max. adj. door weight 60 kg Polished brass 921.08.042 E Stainless steel butt hinge x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 F Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 76 F 3 51 Counterpiece 30 42 2.5 12 4 A Ø 13 D 15.5 76 76 57 70 Nickel-plated illustration Ø 8 3 3.5 5.0 Catch 51 4.0 F B Counterpiece 30 41 2 76 Ø 8 3 2.5 Ø 10 12 50 76 56 70 4.5 C E 4.0 3.5 15 Catch Bright brass illustration Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 159

Fittings for Sliding Stacking Systems HAWA-Variofold 80/H Hawa Application: For high quality and potentially heavy weight top hung end folding partition systems. The frame to first panel joint is pivoted, making equal leaf width suites possible suitable for internal and possibly external applications and also for inward or outward opening suites. Normally used with a continuous bottom guide channel and if so, both odd and even numbers of panels may be incorporated into the suite. However, suites involving pairs of doors, folding either to one or both sides of an opening can be fitted without bottom guide channel. The system is ideal for all residential, domestic and commercial projects. Range: Door thickness 35-45 mm Maximum door panel weight 80 kg Maximum panel width 900 mm Minimum panel width 500 mm Maximum panel height 3.5 m Installation drawing reference 19586 34 50 58 68 ± 3 26 B 35-45 80 A C 44 33 58 29 50 24 A Top track Pre drilled for countersunk screws. Anodised aluminium Length 2.5 m 943.27.9 3.5 m 943.27.935 (2.5 or 3.5 m length) D 40 E 70 F.5 34 HAWA-Variofold 80H fitting sets B Top pivot bearing C Stop with adjustable retainer D Trolley hanger. M10 plastic-tyred wheels and suspension plate E Trolley hanger. M10 plastic-tyred wheels and suspension plate and spacer F Suspension profile. Pre drilled for countersunk screws. Anodised aluminium G Thrust bearing, for bottom guide channel, including driver H Thrust bearing sleeve, Ø mm, including driver I Guide rattle proof, rattle proof, for bottom guide channel, plastic J Cover cap. Grey plastic K Vertical adjustment key L Suspension assembly locking wrench M Fork spanner Fitting sets 1 Basic set (2 doors) with pivot bearing and guide 2 Basic set (2 doors) with pivot bearing without guide 3 Additional set with guide 4 Pivot door set to folded stack, without trolley and top pivot bearing 5 Single pivot door set for installation with bottom guide channel 6 Single pivot door set for installation without bottom guide channel See next page for examples Note: Bottom guide channel not included with any of the fitting sets Set Fittings included in HAWA-Variofold 80H fitting sets B C D E F G H I J K L M Set 1 1 pc 1 pc 1 pc - 5 pcs 1 pc - 1 pc 5 pcs 1 pc 1 pc 1 pc 943.29.010 Set 2 1 pc 1 pc 1 pc - 4 pcs - 1 pc - 4 pcs 1 pc 1 pc 1 pc 943.29.0 Set 3-1 pc - 1 pc 3 pcs - - 1 pc 3 pcs - - - 943.29.012 Set 4-1 pc - - 1 pc - - - 1 pc - - - 943.29.013 Set 5 1 pc 1 pc - - 3 pcs 1 pc - - 3 pcs - - - 943.29.014 Set 6 1 pc 1 pc - - 3 pcs - 1 pc - 3 pcs - - - 943.29.015 Order qty: 1 set N Channel Anodised aluminum. Length 2.5 m 940.81.0 3.5 m 940.81.350 (2.5 or 3.5 m length) 91 G 60 18 26 6 1 34 34 24 24 24 N 10 24 91 H 61 26 Ø 6 10 1 J 26 26 34 9 I L 55 8 60 K M Section 160 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Systems HAWA-Variofold 80/H Hawa HAWA-Variofold 80/H - Guideline to specifying sets Configuration Sets required 2 doors with bottom channel 943.29.010 4 (2+2) doors with bottom channel 943.29.010 x 2 sets 3 doors with bottom channel 943.29.010 + 943.29.013 4 doors with bottom channel 943.29.010 + 943.29.012 5 doors with bottom channel 943.29.010 + 943.29.012 + 943.29.013 3 (2+1) doors with bottom channel 4 (3+1) doors with bottom channel 2 doors with no bottom channel 3 (2+1) doors with no bottom channel 943.29.010 + 943.29.014 943.29.010 + 943.29.013 + 943.29.014 943.29.0 943.29.0 + 943.29.015 Top track, bottom channel and hinges not included O Seal Hollow cross-section seal strip, eliminates the problem of light penetrating through gaps between panels. 10 m length. Black 950.08.300 (10 m length) P Stainless steel hinge, 3 knuckle Maximum adjusted door weight - 80 kg. For minimum door thickness 40 mm. Fixings included. CF 9. Grade 304 stainless steel Length x width 100 x 86 mm BS EN 1935 grade 12 Satin stainless steel 926.88.010 Polished stainless steel 926.88.0 Q Stainless steel hinge, thrust bearing High performance hinges, x 76 mm. Min. door thickness 35 mm. Deep thrust bearing washers to each joint heat treated for high corrosion resistance. Max. door weight 1 kg. Fixing screws included. Satin/polished stainless steel finish or high specification lacquered brass finish-salt water tested CP 240. CE Conformat reference no. 21 Length x width x 76 mm BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished brass finish 921.08.159 100 2.6 3 86 Ø 13 P 2.5 1.5 76 Ø 10 Q 8 4 O R10 10 m length Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 161

Fittings for Sliding Stacking Systems HAWA-Centrefold 80/H Hawa Application: For heavy top hung end folding wall systems. A pivot bearing secures the first door. A mid point panel suspension means that a bottom channel is not needed. Can be used for residential or commercial applications Range Minimum door thickness 35-45 mm Maximum door panel weight 80 kg Maximum panel width 900 mm Minimum panel width 500 mm Maximum panel height 3.5 m Left and right hand, inwards or outwards opening installations all use the same components A communicating pivot door can be added to the panel stack, or the opposing end Vertical adjustment ± 3 mm Light and quite running Panel stack stores compacity Installation drawing reference 19587 34 50 35-45 58 68 ± 3 A 50 26 58 24 B C 33 D A Top track Pre drilled for countersunk screws. Anodised aluminium Length 2.5 m 943.27.9 3.5 m 943.27.935 (2.5 or 3.5 m length) 80 40 E 70 F 44.5 34 29 G 91 6 34 8 550 HAWA-Centrefold 80H fitting sets B Top pivot bearing C Stop with adjustable retainer D Trolley hanger. M10 plastic-tyred wheels and suspension plate E Trolley hanger. M10 plastic-tyred wheels and suspension plate and spacer F Suspension profile 8 mm. Pre drilled for countersunk screws. Anodised aluminium G Suspension profile 550 mm. Pre drilled for countersunk screws. Anodised aluminium H Thrust bearing sleeve, D= mm, including driver I Cover cap. Grey plastic J Vertical adjustment key K Suspension assembly locking wrench L Fork spanner Fitting sets 1 Basic set with pivot bearing without guide 2 Additional set without guide 3 Pivot door set to folded stack, without trolley and top pivot bearing 4 Pivot door set for installation without bottom guide channel Set Fittings included in HAWA-Centrefold 80H fitting sets B C D E F G H I J K L Set 1 1 pc 1 pc 1 pc - 2 pcs 1 pc 1 pc 3 pcs 1 pc 1 pc 1 pc 943.27.100 Set 2-1 pc - 1 pc - 1 pc - 1 pc - - - 943.27.101 Set 3-1 pc - - 1 pc - - 1 pc - - - 943.29.013 Set 4 1 pc 1 pc - - 3 pcs - 1 pc 3 pcs - - - 943.29.015 Order qty: 1 set 91 6 H 61 10 26 1 K I 26 26 34 9 L J Section 162 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Systems HAWA-Centrefold 80/H Hawa HAWA-Centrefold 80/H - Guideline to specifying sets Configuration Sets required 1 and a half doors 943.27.100 2 and a half doors 943.27.100 + 943.29.013 3 and a half doors 943.27.100 + 943.27.101 4 and a half doors 943.27.100 + 943.27.101 + 943.29.013 1 and a half + 1 and a 943.27.100 x 2 sets half doors 1 and a half + 1 door 943.27.100 + 943.29.015 Top track, bottom channel and hinges not included M Seal Hollow cross-section seal strip, eliminates the problem of light penetrating through gaps between panels. 10 m length. Black 8 M 10 m length 950.08.300 Order qty: 1 length N Stainless steel hinge, 3 knuckle Maximum adjusted door weight - 80 kg. For minimum door thickness 40 mm. Fixings included. CF 9. Grade 304 stainless steel Length x width 100 x 86 mm BS EN 1935 grade 12 Satin stainless steel 926.88.010 Polished stainless steel 926.88.0 O Stainless steel hinge, thrust bearing High performance hinges, x 76 mm. Min. door thickness 35 mm. Deep thrust bearing washers to each joint heat treated for high corrosion resistance. Max. door weight 1 kg. Fixing screws included. Satin/polished stainless steel finish or high specification lacquered brass finish-salt water tested CP 240. CE Conformat reference no. 21 Length x width x 76 mm BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished brass finish 921.08.159 100 2.6 3 86 Ø 13 N 4 2.5 1.5 O 76 Ø 10 R10 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 163

Fittings for Sliding Folding Exterior Doors Application Examples Foldaside 310 for top hung internal or external doors HAWA -C for large external top hung doors Häfele Centor E3 system for external folding doors Häfele Centor E4 system for heavy duty external folding doors Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Architectural Ironmongery Sales and Support: Telephone: 01788 548855 (all regions) Telephone: 08 418 2435 (London region) CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or e-mail cpd@hafele.co.uk Top hung systems for interior sliding folding partition doors; from page 146 Bottom rolling systems for interior and exterior sliding folding partition doors; product guide page 183 Section 164 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Folding Shutter Systems HAWA-Frontfold Hawa 32 T=4 18 8 24 36 29 T=4 18 8 HAWA-Frontfold Features: To slide and fold timber or aluminium shutters Suitable for external applications Quiet running action Low wear and tear Folding pack fixed on one side with pivot suspension Height adjustable Unlimited number of leaves Max. weight of folding wall: kg Max. width of leaf: 600 mm Folding shutter thickness: Timber folding shutters: 28-36 mm Aluminium folding shutters: 28-32 mm Adjustable vertically: ±5 mm Material: Running track and guide track: Aluminium Running gear: Plastic Hinges: Stainless steel : Running track and guide track: Silver anodised Installation information: Folding shutters can be installed in front of the window front or on the outside of the balcony. Using shutters can help optimise solar gain and minimize solar overheating on large glazed areas. For sliding shutters and automatic shutter options please see Hawa-Frontslide system shown on pages 36-42 23±5 24 (22.5/35.5) 21±5 24 7 45±5 Model 1 Running gear top and lower guide without plate Recessed guide channel 2 29 30 47±5 Model 3 Running gear top and lower guide with plate. Floor mounted guide channel 36 18 Model 2 Centre guide and architectural hinge 28 56 28 Ø 8 T=4 24 37 1 30-36 18 29 10 42 48±5 Model 3 Running gear top and lower guide with plate. Wall mounted guide channel 6 73 35 73 (22.5/35.5) Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 165

Fittings for Folding Shutter Systems HAWA-Frontfold Application Examples Hawa Examples of mounting variants inset overlay Bottom guide unit, without plate Centre guide unit Bottom guide unit, with plate Panel number The panel number is unlimited. Designs with odd and even panel numbers are possible. Spring catch HAWA spring catches are used for securing folding sliding shutters. For information and planning advice please contact the Architectural Ironmongery Department. 13.5 27 13.5 6 Section 166 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Series 300 System Top Track Brackets Series 300 top track brackets, side or soffit fixing, are suitable for 63 x 48 mm top tracks, used with the following systems: Foldaside 310; pages 170-171 Cornaway 310; pages 172-173 63 48 Series 300 System top track brackets - Selection Guide 1 - Closed end brackets should be fitted at both ends of each track run 2 - Lock joint brackets should be fitted at each track joint 3 - An additional open bracket should be fitted at all points on the track where the doors stack open 4 - Cornaway 310 top track curves should be supported with lock-joint brackets at each end and at least one open bracket in the centre of the curve 5 - Brackets should be positioned at 600-900 mm centre intervals along the track Examples 2 m length of track - single stacking area C O O O C S 3 m length of track - single stacking area C O O O O C S 2 x 3 m lengths of track - two stacking areas C O O O O L O O O O C S S Note: This is a guide only If very heavy or large numbers of panels are proposed, additional brackets may be required - Please contact the Architectural Ironmongery Department for further assistance Key O = Open bracket C = Closed end bracket L = Lock joint bracket S = Stacking area bracket A For ancillary door fittings, hinges and locks etc, see page 142 121 Ø 12 19 Open bracket with closed end piece Closed end piece Single track fixing brackets: A Side fixing bracket Open. If closed end piece required, use end piece shown below (item D). Galvanized pressed steel 942.52.080 (see selection guide for quantity) 35 67 60 Track B Lock-joint plate To convert A to lock-joint bracket. Can be used on all brackets if extreme rigidity required. Galvanized pressed steel 942.52.082 (see selection guide for quantity) Universal soffit fixing brackets: C Soffit fixing bracket Open. For parallel and cross ear applications. Galvanized pressed steel 942.52.083 (see selection guide for quantity) D Closed end piece To convert A or C to closed end bracket. Unhanded. Galvanized pressed steel 942.52.084 Order qty: 1 pair (see selection guide for quantity) E Soffit bracket, lock-joint type Caution: Do not over-tighten set screws. Galvanized pressed steel 942.52.085 (see selection guide for quantity) B 22 51 D 48 94 94 50 5 58 57 70 C Ø 10 94 Open bracket with lock-joint plate 5 58 57 Lock-joint plate 70 Track Ø 10 E Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 167

Fittings for Sliding Folding Exterior Doors Foldaside 310 Endfold Application: Top hung folding doors with backflap fittings. Usually external applications but can be used internally. Suitable for folding into rebated head. For hospitals, schools, offices, residential or commercial applications Can also be used for folding FLOATING applications, details on request Range Max. door weight 50 kg Max. door height 3.3 m Max. door width 900 mm Door thickness 44-57 mm Door construction: Suites of even numbers or odd numbers of doors including an access door. Up to eight leaves may be hinged together and hinged to jambs. Rebated head facility may assist weathering or help reduce sound transmission. Width of door leaves vary according to arrangements. Swing leaves are best hinged to jambs, but when hinged to folding suites reduce door leaf widths to 700 mm. Always engage holdback catch before operating. Floor channel control may be omitted on a 2 door suite where door panel width is less than 550 mm and additional folding hinges are used Fixing: Side fixing of track standard. Additional brackets required where doors stack. Trolley hangers and guides have vertical adjustment. Channel unnecessary under swing leaves Trolley hangers, backflaps and guides must be plumb. Floor channel must be plumb with top track A Top track, 63 x 48 mm Galvanized steel to BS EN 10142 Length 2.1 m 942.52.921 3.0 m 942.52.930 (2.1 or 3.0 m length) B End door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflap 943.23.010 Rebated head Open bracket Notch top corners to clear head if necessary Suggested head detail only 35 44 to 57 door thickness 12 Ø 12 mm coachscrew 35 A 63 12 12 67 48 Ø 53 Brackets for securing top track, side or soffit fixing are shown in detail on page 167 8 35 B 67 Ø 53 C Centre door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflaps 943.23.0 D Backflap hinge For fitting at half door height between centre door trolley hanger and guide. Zinc plated pressed steel 943.21.070 E Centre door guide Galvanized steel with double pressed steel backflaps and brass roller 943.21.031 F End door guide Galvanized steel with single pressed steel backflap and brass roller 943.21.030 G Channel, x mm Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 942.51.721 3.0 m 942.51.730 (2.1 or 3.0 m length) H Channel, 22 x 22 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 943.23.921 3.0 m 943.23.930 (2.1 or 3.0 m length) C 8 Line of flush bolt let into the door 39 Shoot and keep Extended shoot up to 40 mm 67 216 67 12 10 E 140 6 108 67 Ø 16 G H 67 140 18 22 22 6 108 67 90 Ø 16 F D Section 168 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Foldaside 310 Endfold Centre hanger End hanger Hinges Backflap hinges Flush handles End hanger Flush bolts Centre guide End guide Floor channel Foldaside projection butt hinges for frame to panel joints: I Stainless steel projection hinge x mm. Thrust bearing washers to each joint BS EN 1935 grade 13 Satin stainless steel 921.08.168 J Brass projection hinge x mm. Double phosphor bronze washers with brass pin Polished stainless steel 921.08.060 Foldaside butt hinges for panel to panel joints: K Stainless steel butt hinges x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 L Brass butt hinge x 76 mm. Double phosphor bronze washers with brass pin Max. adj. door weight 60 kg Polished 921.08.042 M Twin ball catch To act as holdback catch on access door or to prevent door panel drift.. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 N Lever action flush bolt For folding doors. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 O Lever action flush bolt For folding doors. With adjustable shoot;, 30, 35 or 40 mm for added security. Brass Polished brass 900.17.860 Satin nickel 900.17.851 P Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 12 If this leaf folds to jamb, omit rebate x foldaside hinges 22 End hanger End guide Flush bolt and handle Centre hanger Backflap hinge Centre guide x foldaside hinges 35 6 x 76 foldaside hinges 2, 4, 6 or 8 leaves one way with swing leaf on opposite jamb I 2.5 4 Ø 12 Ø N 35 8 19 5.0 Refer to Section 3, pages 2-3 for information on BS EN 1935 hinge grades and classification 76 13 38 229 L 5.0 M 5 J Ø Counterpiece 30 42 13 P 2.5 12 6 12 Position of flush bolt and handle 13 15.5 57 70 Nickel-plated illustration 41 28 3 68 89 Flush handle Holdback catch If this leaf folds to jamb, omit rebate Centre hanger Backflap hinge Centre guide x 76 foldaside hinges 3, 5 or 7 leaves one or both ways 3.5 5.0 Catch 39 O Ø 2.5 Ø 10 38 3 76 /30/35/40 K 4.0 x hinges 12 Position of flush bolt and handle For ancillary door fittings, hinges and locks etc, see page 142 M Counterpiece 30 41 2 12 56 70 3.5 15 Catch Bright brass illustration Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 169

Fittings for Sliding Folding Exterior Doors Foldaside 310 Industrial Endfold For top hung inward or outward folding doors with rebated head facility Application: For garages, factories, warehouses and other industrial applications. Hangers and guides have face fixing backflaps. Range: Max. weight per door leaf 55 kg Max. door height 3.3 m Max. opening width unlimited Max. door leaf width 900 mm Door thickness 44-57 mm Door construction: Up to eight leaves may be hinged together. Width of door leaves vary according to arrangements, refer to drawings for details. Swing leaves are best hinged to jambs. When hinged to folding suites reduce door leaf widths to 800 mm. Fixing: Side fixing of track standard. Additional brackets required where doors fold. Floor channel unnecessary under swing leaves. For ancillary door fittings, hinges and locks etc, see page 142 A Top track, 63 x 48 mm 2 mm wall thickness. Galvanized steel to BS EN 10142 Length 2.1 m 942.52.921 3.0 m 942.52.930 (2.1 or 3.0 m length) Rebated head Suggested head detail only Open bracket 35 Notch top corners to clear head if 44 to 57 necessary door thickness 12 A 63 Ø 12 mm coachscrew 48 12 12 67 2 mm wall thickness Brackets for securing top track, side or soffit fixing are shown on page 167 35 Centre hangers Butt hinges Backflap hinges Centre guides Ø 53 Drop bolts End hangers End guides Cylinder lock Flush handle outside Bow handles Channel B End door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflap 943.23.010 35 Ø 53 8 B 67 D C Centre door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflaps 943.23.0 D Backflap hinge For fitting at half door height between centre door trolley hanger and guide. Zinc plated pressed steel 943.23.070 E End door guide Pressed steel with brass roller 943.23.030 F Centre door guide Pressed steel with brass roller and pressed steel backflaps 943.23.031 G Floor channel, 36 x 37 mm lugs for fixing into concrete. Suitable for industrial type thresholds where vehicular traffic is likely. Galvanized steel Length 2.1 m 942.51.821 3.0 m 942.51.830 (2.1 or 3.0 m length) C 8 67 216 150 67 12 36 Ø 19 67 108 90 E 108 67 G 37 150 36 216 216 67 F Ø 19 Section 170 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Foldaside 310 Industrial Endfold Door arrangements. From 2 to 8 leaves one way - with or without swing leaf on opposite jamb From 2 to 8 leaves both ways 12 x Foldaside hinge 22 End hanger End guide Roller bolt Bow handle If this leaf folds to jamb, omit rebate 35 Centre hanger Backflap hinge Centre guide 6 6 12 x 76 Foldaside hinges for panel to panel joint 2, 4, 6 or 8 leaves one way with swing leaf on opposite jamb x Frame to panel hinge Centre hanger next to swing acess door Open bracket with closed end piece Holdback catch or cabin hook Cylinder lock Flush handle outside Swing leaf No channel under swing leaf Inside elevation Open bracket with lock joint plate Roller bolt Bracket centres 600 to 900 Hanger Backflap hinge Guide Bow handle Centre guide next to swing access door Example of 5 door configuration (position of ironmongery) Extra bracket where doors fold Frame to panel hinges For ancillary door fittings, hinges and locks etc, see page 142 Ø 10 Foldaside butt hinges for panel to panel joints: H Stainless steel butt hinges x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 2.5 76 H 4.0 Ø 12 Swing leaf in folding position Cabin hook to secure access door to folding suite Foldaside butt hinges for frame to panel joint: I Stainless steel hinge, thrust bearing Deep thrust bearing washers to each joint, Grade 4 heat treated for high corrosion resistance. Fixing screws included. Satin/polished stainless steel finish or high specification lacquered brass finish, salt water tested CP240 Length x width x mm BS EN 1935 grade 13 Satin stainless steel 921.08.168 Polished stainless steel 926.91.051 Polished brass finish 926.91.018 J Cabin hooks Alternative to twin ball catch. Fixing screws included. Brass Polished brass 938.13.008 Satin chrome 938.13.004 Polished chrome 938.13.002 K Lockable roller guide bolt Supplied with locking staple. Zinc-plated steel 943.23.090 L Bow handle Zinc-plated and gold passivated cast iron 942.51.060 (1 pc required per panel) M Bow handle Heavy duty. Unfinished steel 942.51.070 (1 pc required per panel) 37 28 J 34 6 I 2.5 5.0 171 M 151 39 K 530 36 50 Ø 19 32 0 L 45 34 57 160 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 171

Fittings for Sliding Folding Exterior Doors Cornaway 310 For doors sliding from an opening around a corner and along a side wall or walls Application: Top hung sliding doors for domestic and industrial use. For garages factories etc. Range Max. weight per door leaf 50 kg Max. door height 3.3 m Max. opening width unlimited Max. door leaf width 1.0 m Door thickness 44-57 mm Door construction: Up to five leaves may be hinged together. Consider door area in exposed positions as wind pressure can result in the sail effect putting additional stress on the track and fittings. All door leaves equal width If swing leaves hinged to sliding doors reduce door widths by 100 mm, height by 300 mm and weight by 10 kg If depth of return wall exceeds radius of curve by 75 mm or more, a swing leaf is not essential Fixing: Side fixing standard. It is essential that top tracks and floor channels are plumb in line. Notch top corners of door where shown to clear stop at head. Trolley hangers and guides have vertical adjustment Rebated head Open bracket Notch top corners to clear head if necessary Suggested head detail only 35 44 to 57 door thickness 12 Ø 12 mm coachscrew 12 12 67 8 63 A / B 35 Ø 53 67 48 C For ancillary door fittings, hinges and locks etc, see page 142 A Top track, 63 x 48 mm Galvanized steel to BS EN 10142 Length 2.1 m 942.52.921 3.0 m 942.52.930 (2.1 or 3.0 m length) B Top track, curved 600 mm radius curve. Galvanized steel to BS EN 10142 942.52.906 D 8 35 67 Ø 53 108 Brackets for securing top track, side or soffit fixing are shown in detail on page 167 C End door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflap 943.23.010 D Centre door trolley hanger Steel, ball bearing, lubricated for life with pressed steel backflaps 943.23.0 E Backflap hinge For fitting at half door height between centre door trolley hanger and guide. Zinc plated pressed steel 943.23.070 F End door guide Pressed steel with brass roller 943.23.030 G Centre door guide Pressed steel with brass roller and pressed steel backflaps 943.23.031 H Floor channel, 36 x 37 mm Continuous lugs for fixing into concrete. Suitable for domestic and industrial type thresholds where vehicular traffic is likely. Galvanized steel Length 2.1 m 942.51.821 3.0 m 942.51.830 (2.1 or 3.0 m length) I Floor channel, curved 600 mm radius curve. Continuous lugs for fixing into concrete. Galvanized steel 942.51.806 (0.6 m length) 150 216 Ø 19 67 67 108 12 36 90 F Hangers, backflaps and guides must be plumb 67 H / I 150 37 216 216 67 G Ø 19 36 E Section 172 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Cornaway 310 Any number of leaves in opening but no more than five hinged together Any width of opening Cylinder night latch Bow handle Flush handle outside Open bracket with lock joint plate 30 Centre hangers Roller bolt guides swing leaf along side wall 216 Bracket centres 600-900 Backflap hinges 216 Centre guides 216 For ancillary door fittings, hinges and locks etc, see page 142 Open bracket 171 Open bracket with closed end piece End hanger 30 Bow handle 30 End guide Timber bearer side wall Open bracket with lock joint plate Open bracket Open bracket with closed end piece Extended floor channel to guide swing leaf alongside wall X 600 Radius Track Track curve Door stop fixed to wall at mid height of door Top of end leaf notched 30 600 radius curve is standard if X exceeds 350 ask Häfele for advice as swing leaf not then essential Doors open Plan of doors Timber bearer lintel Plan of track and brackets 47 Ø 44 Track Brackets Hangers Cylinder latch End Centre 22 Backflap hinges Bow handle inside 74 55 60 22 Channel Guides End Centre Flush handle Guide Door outside roller stop bolt J Deadlocking cylinder rim night latch For 29-64 mm door thickness. Backset 40 mm Latchbolt (reversible): brass Case and keep: Silver or polished chrome. Knob: Polished chrome Cylinder: Satin chrome. Accessories: 2x Keys: Nickel plated Silver sprayed 916.54.914 Pol. chrome-plated 9.58.910 Order qty: 1 set K Door stop, heavy duty Wall fixing with twin buffers. For doors 45 mm minimum thickness. Fixed mid-height of doors. Zinc-plated steel 942.51.060 (1 pc required per panel) 0 60 942.51.050 (2 pcs required per panel) L K L Lockable roller guide bolt Supplied with locking staple. Zinc-plated steel 60 530 943.23.090 M 34 67 M Bow handle 100 16 51 Zinc-plated and gold passivated cast iron 36 N Flush pull handle General duty, for residential use. Fixing screws included. Brass Satin nickel-plated 910.37.085 Polished brass 910.37.080 O Flush pull handle Heavy duty, for commercial use. Stainless steel 910.37.100 (1 pc required per panel) 130 O 150 50 Ø 19 32 Alternative flush pull handles shown in Section 4 45 57 J 57 0 N 83 35 3.5 160 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 173

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors Section 174 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors Application: High quality top hung folding door system for residential or commercial applications. Complete with weather seals which are suitable for coastal applications. Function: Normally used for outward opening doors. Inward opening doors are possible, please contact the Architectural Ironmongery department for further details. Range: Door type: Non rebated equal sized doors Max. panel weight: 80 kg Max. panel height: 3000 mm Max. panel width 1000 mm Max. opening 16 m Panel thickness: 35-68 mm Max. number of panels: Up to 8 panels to each side. Odd or even number of doors can be used. Note: Range dims given are intended as a guide only. Calculated weight check should be performed to ensure doors built to maximum height and width do not exceed maximum weight. Adjustability: 10 mm vertical adjustment on all pivots and carriers. 8 mm lateral adjustment on each pivot set. Cut-out in track allows simple removal of hardware Durability: Hardware is made using 304 and 316 stainless steel. System tested to exceed 50,000 operations. Salt spray corrosion tested Door size calculation To calculate the dimensions of the doors or openings we strongly recommend you contact the Architectural Ironmongery Department for advice. To manually calculate door sizing for an opening, follow the following steps: 1. Prepare a basic sketch of your door opening (see worked example), to visualise clearances and check sizes. 2. The calculation is based on all panels being equal width, using half-offset hinges. Note that he allowance between each panel is 4 mm although hinge thickness is less - this allowance has been determined by consultation with fabricators as the best approximation for calculation. Clearance between hinges and hinge pins, coupled with the pressure from compression seals accounts for the allowance being larger than the nominal hinge flap thickness. 3. Recommended clearances are as follows; Jamb to panel (door closed): 7 mm Panel to panel (door closed): 4 mm Top of panel to head: 5 mm Bottom of panel to sill: 10.0 mm 4. Panel width: W Opening width: L Total number of panels: N Panel width is: W = L - 14 - (4x(N - 1))** N Surelock adjustment Surelock is the trademark for Centor s carrier pin locking system (patents granted). Carrier pins at the top pivot, intermediate and end carriers support the full door weight and it is here that the height of the panels is adjusted. Surelock ensures that once the heights are set, they are set. Using Surelock is simple 1. Surelock is supplied with a plastic shipping clip installed to make initial adjustment very easy. 2. Insert a flat bladed screwdriver into the slot to rotate the pin 3. When correct adjustment is reached and doors operate well, remove the shipping clip (it s bright yellow to help you remember). 4. Surelock will automatically snap into place when the blade and slot are aligned. 5. To readjust at a later date, simply pull the blade down to disengage it from the slot, replace plastic shipping clip and rotate the pin. Worked examples Clear opening size 24 high x 40 wide (L), and a 3L x 2R arrangement W = 40-14 - (4 x (5-1)) 5 W = 834 mm Check against your door layout: L = 2(7.0) + 4(4) + 5(834) = 40 (OK) The panel height is the opening height less the nominal top and bottom clearances: Panel height H = 24-5 - 10-2410 mm **Note: For even sets, e.g. 2L2R or 4L2R, the meeting gap would be larger - double seals are used to close the gap. W = L - 14 - (4 x N) N 1 2 3 4 5 5 10 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 175

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors Common outward panel layouts Top tracks, bottom channels and seals to be ordered as separate items Type Outward opening configuration Fittings required 2L 1 x pivot set (F) inside G, F not accessible from exterior 1 x wall pivot set (G) C 1x right carrier set (C) outside 1 x hinge set (J) J 2 x dropbolt (P) 2L1R inside G, F G, F C outside J 3L inside G, F outside I 3L1R inside G, F B G, F outside I 4L B G, F B C not accessible from inside exterior outside I I 4L1R inside G, F B G, F C outside I I 3L2R G, F B G, F inside C outside I J 5L inside G, F B B outside I J 3L3R inside G, F B B G, F outside I may be reversed I 7L G, F B B B inside outside I J J G, F B B B G, F inside outside I J I 2 x pivot set (F) 2 x wall pivot set (G) 1 x right carrier set (C) 1 x hinge set (J) 2 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x half offset hinge set (I) 2 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x half offset hinge set (I) 4 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x right carrier set (C) 2 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x right carrier set (C) 2 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x left carrier set (C) 1 x hinge set (J) 1 x half offset hinge set (I) 4 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 2 x intermediate carrier set (B) 1 x hinge set (J) 1 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 2 x intermediate carrier set (B) 2 x half offset hinge set (I) 6 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 3 x intermediate carrier set (B) 2 x hinge set (J) 1 x half offset hinge set (I) 6 x dropbolt (P) 4L3R 2 x pivot set (F) 2 x wall pivot set (G) G, F B C B G, F 2 x intermediate carrier set (B) inside outside I I I 1 x right carrier set (C) 3 x half offset hinge set (I) 6 x dropbolt (P) 5L2R 2 x pivot set (F) 2 x wall pivot set (G) G, F B B C G, F 2 x intermediate carrier set (B) inside outside I J J 1 x left carrier set (C) 2 x hinge set (J) 1 x half offset hinge set (I) 6 x dropbolt (P) 5L3R 2 x pivot set (F) 2 x wall pivot set (G) 3 x intermediate carrier set (B) 1 x hinge set (J) 2 x half offset hinge set (I) 8 x dropbolt (P) Type Outward opening configuration Fittings required 2R 1 x pivot set (F) inside F, G not accessible from exterior 1 x wall pivot set (G) 1 x left carrier set (C) outside C 1 x hinge set (J) J 2 x dropbolt (P) 1L2R inside G, F G, F outside B J 3R inside outside 1L3R inside G, F outside B G, F I 2L2R inside G, F C C G, F outside 1L4R inside G, F C B G, F outside 4R inside outside 2L3R inside G, F C B G, F outside 5R inside outside 3L4R G, F B C B G, F inside outside I I I 7R inside outside 2L5R G, F C B B G, F inside outside J J I 8R inside outside J J B I G, F I J C B G, F I I I I not accessible from exterior 1 x pivot set (F) 1 x wall pivot set (G) not accessible1 x intermediate carrier set (B) from exterior 1 x left carrier set (C) 2 x half offset hinge set (I) 4 x dropbolt (P) B B G, F J B B B G, F J C B B B G, F I J J I not accessible from exterior J I I 2 x pivot set (F) 2 x wall pivot set (G) 1 x left carrier set (C) 1 x hinge set (J) 2 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x half offset hinge set (I) 2 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x right carrier set (C) 1 x left carrier set (C) 2 x hinge set (J) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x left carrier set (C) 2 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 1 x intermediate carrier set (B) 1 x right carrier set (C) 1 x hinge set (J) 1 x half offset hinge set (I) 4 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 2 x intermediate carrier set (B) 1 x hinge set (J) 1 x half offset hinge set (I) 4 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 2 x intermediate carrier set (B) 1 x left carrier set (C) 3 x half offset hinge set (I) 6 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 3 x intermediate carrier set (B) 2 x hinge set (J) 1 x half offset hinge set (I) 6 x dropbolt (P) 2 x pivot set (F) 2 x wall pivot set (G) 2 x intermediate carrier set (B) 1 x right carrier set (C) 2 x hinge set (J) 1 x half offset hinge set (I) 6 x dropbolt (P) 1 x pivot set (F) 1 x wall pivot set (G) 3 x intermediate carrier set (B) 1 x left carrier set (C) 2 x hinge set (J) 2 x half offset hinge set (I) 8 x dropbolt (P) Section 176 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors Door thickness - 18 62 A Top track Anodised aluminium Length 2330 mm 2930 mm Silver 943.44.923 943.44.929 Gold 943.44.823 943.44.829 (2330 mm or 2930 mm length) 50 60 5 15 96 52 A 50 62 52 B Intermediate carrier set, concealed Stainless steel Satin stainless steel 943.44.1 Titanium gold 943.44.128 Order qty: 1 set 39 40 140 10 40 140 C End carrier set Handed. Stainless steel Left handed Right handed Satin stainless steel 943.44.130 943.44.140 Titanium gold 943.44.138 943.44.148 Order qty: 1 set B 16 108 45 C D Bottom channel Anodised aluminium Length 2400 mm 3000 mm Silver 943.45.923 943.45.929 Gold 943.45.823 943.45.829 (2400 mm or 3000 mm length) E Bottom channel insert For insertion in channel D or sill V. Black plastic Length 2400 mm 943.45.723 3000 mm 943.45.729 Order qty: 1 length F Pivot set, concealed Stainless steel Satin stainless steel 943.44.100 Titanium gold 943.44.108 Order qty: 1 set G Wall pivot set We would recommend use of wall pivot set on all sized door panels but must be used on door panels over 2150 mm. Stainless steel Satin stainless steel 943.44.0 Titanium gold 943.44.8 Order qty: 1 set H Seal Rubber Type Roll length Brown White AQ 21 Perimeter 15 m 950.03.001 950.03.007 AQ 63 Panel 6 m 950.03.0 950.03.017 AQ 109 Access 6 m 950.03.021 950.03.027 Order qty: 1 roll 15 5 Stop height to suit weather performance Door thickness -17.5 Door thickness - 5.5 H AQ 21 Perimeter seal AQ 63 Panel seal AQ 109 Access seal 24 Panel width 41 18 60 15 10 22 15 50 15.7 68 13 G 22 54 Panel thickness 24 44 34 100 24 140 18 21 D 82 34 140 F 16 44 60 138 E Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 177

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors I Hinge set, half offset Stainless steel Satin stainless steel 943.44.0 Titanium gold 943.44.8 Order qty: 1 set J Hinge set, straight Stainless steel Satin stainless steel 943.44.210 Titanium gold 943.44.218 Order qty: 1 set 108 I 54 108 J 54 K L K Half hinge set, half offset, without handles Stainless steel Satin stainless steel 943.44.2 Titanium gold 943.44.228 Order qty: 1 set L Hinge set, straight, without handles Stainless steel Supp. Ref. Satin stainless steel 943.44.230 Titanium gold 943.44.238 Order qty: 1 set Note: Fourth hinge recommended for doors over 20 mm M Hinge, half offset, single Stainless steel Satin stainless steel 943.44.240 Titanium gold 943.44.248 16 16 M 45 100 45 100 N 16 16 45 100 45 100 16 108 O 45 100 54 16 45 100 N Hinge, straight, single Stainless steel Satin stainless steel 943.44.0 Titanium gold 943.44.8 O External single handle Stainless steel Satin stainless steel 943.44.150 Titanium gold 943.44.158 P Drop bolt, outward opening For bottom applications use with box keeper U shown on page 179. Aluminium Keyed Length Silver anodised Gold anodised 0 mm 943.44.401 943.44.451 Non-keyed 0 mm 943.44.400 943.44.450 400 mm 943.44.410 943.44.460 600 mm 943.44.4 943.44.470 Q Drop bolt, inward opening Aluminium Keyed Length Silver anodised Gold anodised 0 mm 943.44.301 943.44.351 Non-keyed 0 mm 943.44.300 943.44.350 400 mm 943.44.310 943.44.360 600 mm 943.44.3 943.44.370 Concealed 0 mm 943.44.302 943.44.352 33 21 21 61 U Shown on page 179 23 26 P 0 36 61 Inside view shown 27 21 26 0 36 61 27 Q 37 27 0 Section 178 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors Häfele Centor E3 Folding System for Partition Doors R Drilling jig (optional) Aluminium 943.44.090 62 S R 7 S Router bit (optional) Steel 14 36 943.44.398 Magnetic door catch T T Magnetic door catch To act as a hold back catch on hinged doors. Fixings included. Black plastic 943.44.080 60 9 Magnetic door catch U Box keeper sill protection cup For use with outward opening drop bolt P, shown on page 178, when used with E3 sill V. Auminium Satin chrome 943.44.384 Satin brass 943.44.388 21 61 23 U V E3 concealed disabled sill, machined When this profile is used with a weatherstrip height of less than 15 mm, the opening will meet the disability access requirements (BS 8300:01). 3.6 m length. Aluminium Dark brown 950.03.101 Anodised aluminium 950.03.109 (3.6 m length) W E3 concealed disabled sill end cap Handed. For use with E3 sill V. Black plastic Hand Left Right 950.03.190 950.03.191 176.5 V 35.2 Left hand Right hand W Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 179

Fittings for Sliding Exterior Folding Doors Häfele Centor E4 Folding System for Partition Doors Application: For openings too large for E3 system. Creating seamless transitions between indoor and outdoor spaces. Heavy-duty folding door hardware for panels to 1 kg Suitable for openings in larger residential and commercial applications Taller, wider door panels, expanses of framed glass; E4 provides the flexibility to manage space for lifestyle or business - on a grand scale Range: Maximum door panel weight 1 kg Maximum door panel width 00 mm Maximum door panel height 4000 mm Door thickness: 44.45 or over 57.15 mm when using E4 sill system 34.9 to 76.2 mm when using floor channel Maximum number of doors: 8 each direction (17.6 m opening) Note: When using maximum door width and height 00 mm to 4000 mm door may exceed maximum door weight of 1 kg. Calculated weight check should be done Please contact us for further information Section 180 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Exterior Doors HAWA -C Endfold Hawa Application: Top hung folding door gear with rebated head facility for use with unusually wide and heavy door panels. Normally for external use, but internal applications possible - Details on request. Both inward and outward opening door suites can be accommodated. Top quality smooth and quiet sliding action, despite the potentially very heavy door suites Range Maximum door panel weight 1 kg Maximum door panel width 1.0 m Min. door panel thickness usually 50 mm Door suite configuration: Odd number of doors only, must include access door Maximum number of door panels in one suite is normally 7 Doors secured either by flush bolt or deadbolt lock Consider dimension A on smaller first hinged leaf - This dimension is critical Dimension A: Normally half door thickness plus half hinge knuckle diameter thickness Trolley hanger requires cut out to adjoining panel Detailed drawings and suggested gear specifications available on request For safety - cabin hook recommended on access panel to prevent drift when doors open Rebate details can differ at each end of panels Options for auxiliary fittings supplied in polished brass available on request Door thicknesses may vary but rebate cut out remains as shown 6 10.5 95 10.5 32 45 57±2 HAWA -C folding door gear showing grade 304 stainless steel track with intermittent cross ear fixing lugs N.B. dimension A = drawing ref 12398 must be used to calculate dim A - available on request A X=position of flush pulls, flush bolts if required 6 7.5 Trolley hanger fixing bracket 50 mm door Line of cut-out 16 32 1 2 Example on 50 mm door thickness Example on 50 mm door thickness not to scale: Please refer to drawing No. 12398a; available on request 8 287 15 32 285 Trolley fixing bracket to be let into top and edge of door panel Folding Line of cut out door to top of hinge adjoining door to accommodate extended trolley 4 A Stainless steel track Soffit fixed. Pre-drilled for countersunk screws. Grade 304 stainless steel Length 2.0 m 3.0 m 942.43.2 942.43.3 (2.0 or 3.0 m length) 90 A 6 64 6 45 B Trolley hanger with bracket Spring loaded to counter slight movements in timber and to improve ease of operating large panels. Galvanized steel bracket and steel rollers with maintenance free, sealed, self-lubricating bearings 943.02.010 C Track stopper For top track. Screw fixing. Galvanized steel 942.41.042 D Bottom guide Self-cleaning nylon pivot. Galvanized steel. Brass channel D recommended for use where open threshold subject to heavy foot traffic 943.02.030 E Channel, x mm Pre-drilled for countersunk screws. Brass Length 2.0 m 3.0 m 407.66.827 407.66.836 (2.0 or 3.0 m length) F Channel, x mm Pre-drilled for countersunk screws. Anodised aluminium Length 2.5 m 3.5 m 940.41.0 940.41.350 (2.5 or 3.5 m length) 5 150 8 35 32 D B E / 42 F C 60 50 Bottom guide to be let into edge of door panel Line of cut-out 8 24 35 32 150 Use track stopper C if no cut out to adjoining panel required - i.e. for even number of panels Butt hinges, lock, bolts and handles shown on page 182 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 181

Fittings for Sliding Folding Exterior Doors HAWA -C Endfold Hawa Typical door configurations HAWA -C 3 door applications Ø 10 G Stainless steel butt hinge x 76 mm. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated stainless steel BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 H Heavy-duty butt hinge Concealed bearing triple-knuckle. 4 non-detachable, self-lubricating bushings. With non removable pin (NRP). Ø 6 mm fixing screws supplied. Stainless steel Length x width x 89 mm Max. adj. door weight 1 kg Satin 926.95.000 Polished 926.95.001 I Concealed deadbolt lock Galvanized steel. Can also be used at the top of doors for extra stability and security 407.49.924 J Lock access sleeve Nickel-plated brass 407.49.184 K Allen key For deadbolt lock. 407.49.193 L Slimline flush bolt Fits to base of door - face fix only. Fully enclosed design - Minimum cut out required. Slide action. With keeper and fixings. Grade 316 stainless steel Satin 9.62.350 Polished 9.62.351 M Lever action flush bolt For folding doors. Door thickness 45 mm+. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 N Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 51 3 2.5 I 40 30 L 76 G 4.0 60 109 Ø inner 22 16 7 42 0 44 104 29.5 Ø 13 mm bolt 18 mm throw M 35 K 3.3 Ø 15 J 40 9 8 19 13 38 229 27 89 18 30 0 19 7 10 H 60 152 132 N Section 182 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Product Guide Max. door Bottom Rolling Sliding Folding Partition Doors panel weight Foldaside 866 for outward opening external folding doors.................................60 kg.........184-185 Foldaside 640 for end folding general purpose partitions - inward or outward opening............75 kg.........186-187 Foldaside 640M for end folding metal doors or partitions - inward or outward opening...........55 kg.........188-189 Foldaside 642 for end folding 180 stacking partitions - inward or outward opening.............45 kg.........190-191 Centafold 644 for centre folding interior partitions - inward or outward opening.................60 kg.........192-193 Foldaside 866 Facade for outward opening external folding doors Top hung systems for interior and exterior sliding folding partition doors; product guide page 141 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 183

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 866 Facade Bottom Rolling Endfold Application: External outward folding doors with rebated head or sill facility. Usually residential but also commercial projects Joinery: Equal width leaves add or subtract rebates Range Maximum door weight 60 kg Maximum door height 3.0 m Maximum leaf width 900 mm Door thickness 44-54 mm Door configurations Suites of 3 or 5 only, odd numbers only, no floating suites For ancillary door fittings, hinges and locks etc, see page 142 4 10 3 86 A Top channel, x mm Pre-drilled for countersunk screws. Bright aluminium Length 2.1 m 942.51.721 3.0 m 942.51.730 (2.1 or 3.0 m length) B Top channel, 22 x 22 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 943.23.921 3.0 m 943.23.930 (2.1 or 3.0 m length) 31 C 51 A 22 C Top roller guide With two guide rollers with sealed bearings. Anodised aluminium 86 B 18 22 Gold anodised 943.26.030 Silver anodised 943.26.031 82 D Intermediate back flap hinge At least one to be fixed between top guide and bottom roller. Anodised aluminium Gold anodised 943.26.070 Silver anodised 943.26.071 E Bottom roller Steel with self lubricating needle bearings. Anodised aluminium Gold anodised 943.26.010 Silver anodised 943.26.0 F Bottom track, 10 x 21 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 941.80.721 3.0 m 941.80.730 (2.1 or 3.0 m length) G Bottom track, 10 x 21 mm Pre-drilled for countersunk screws. Stainless steel Length 2.1 m 941.80.621 3.0 m 941.80.630 (2.1 or 3.0 m length) H Bottom track, 10 x mm Pre-drilled for countersunk screws. Brass Length 2.1 m 941.80.921 3.0 m 941.80.930 (2.1 or 3.0 m length) 86 45 E 86 3 42 5 45 44-54 thickness 70 Usual position of door bolt D 86 Ø 22 82 F G H 10 10 10 21 21 Section 184 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 866 Facade Bottom Rolling Endfold Normal position of flush handle and flush bolt on the external panel face at the top and bottom respectively 10-14 22 3 or 5 leaf suites unhanded Position of cabin hook to secure access leaf x 76 mm 12 31 Cut out in door top mm deep Cut out in door top 43 mm deep Equal width doors add or subtract rebates J Foldaside hinge, x 76 mm For panel to panel joints. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 J 18 Top guide/top channel Ø 10 4.0 32 34 Bottom roller/track/ intermediate back flap hinge x mm Foldaside projection hinge K Foldaside projection hinge, x mm For frame to panel joints. Thrust bearing washers to each joint. Satin stainless steel or electrophoretic brass-plated BS EN 1935 grade 13 Satin 921.08.168 Brass-plated 926.91.018 2.5 76 K Ø 12 5.0 L Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 13 41 2.5 0 152 132 M Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 N Lever action flush bolt For folding doors. For door thickness 45 mm+. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 O Necked barrel bolt, 152 x 32 mm Striking-plate and fixing screws included. Brass Length x width 152 x 32 mm Polished brass 900.17.942 Satin nickel plated 900.17.943 P Cabin hook To secure access leaf. Fixing screws included. Brass Polished brass 900.17.955 Satin nickel-plated 900.17.956 For suggested weather seals see page 145 30 30 L P 28 3 68 89 124 O 152 16 32 32 19 60 N 35 8 19 13 38 M 229 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 185

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 640 Bottom Rolling Endfold Application: A versatile system for bottom rolling, internal timber doors. For openings without rebated head or cills. Ideal for hospitals, schools, public houses, residences etc Range Max. door weight 75 kg Max. door height 3.6 m Max. opening width 14.4 m Max. door leaf width 900 mm Door thickness 44 mm only Up to 8 leaves may be hinged together. Not suitable for floating suites, extra care needed in setting out if folding behind return wall Thicker doors possible - details on request Note: The first hinged leaf must be narrower than the other door leaves in the suite for geometric reasons. Please refer to the drawings at the top of page 187 where full setting out dimensions are shown. If further assistance is required please contact the Architectural Ironmongery Department A Top safety guide channel Pre-drilled for countersunk screws. Galvanized steel to BS EN 10142 Length 2.1 m 941.80.821 3.0 m 941.80.830 (2.1 or 3.0 m length) 44 32 19 44 29 3 48 5 Bottom rollers must be plumb with top guides Bottom track must be plumb with top track 45 Ø39 A 152 44 32 29 5 B Top roller guide For standard head room. Top and edge fixing for strength. Apron fits rebate of door. Steel with nylon roller 943..030 C Top roller guide For severely restricted headroom. For use with high quality joinery where vertical leg not required for aesthetic reasons. Must be fixed such that the centre line of the roller is plumb in line with the centre line of the bottom roller. For door panel height 2.3 m. Steel with nylon roller 943..031 D Bottom roller Needle bearing roller, ball bearing swivels. Satin anodised aluminium and polished brass cover plates supplied for customers on site choice-discard those not required 943..010 E Bottom track Drilled and countersunk for fixing to timber. Brass Length 2.1 m 943..921 3.0 m 943..930 (2.1 or 3.0 m length) For ancillary door fittings, hinges and locks etc, see page 142 Door construction: Door thickness 44 mm only. Width of door leaves vary according to arrangements. Swing leaves are best hinged to jambs. With swing leaves on folding suites, reduce door height to 3.0 m, leaf width to 800 mm and weight to 55 kg. Always engage holdback catch before operating As bottom rollers are housed at bottom of stile, keep tenons of rail high to avoid cut-out. Fixing: Top channel normally soffit fixed Bottom track screwed to accurately machined timber cill to provide complete support to the underside of the running tread without voids, and the cill to be firmly fitted to prevent distortion or deflection Floor track unnecessary under swing leaves The bottom track must be level Door thickness only 44 5 Timber cill to be accurately machined to provide continuous support to bottom track Flush bolts Hinges Flush handles Guides Rollers 76 5 Ø 38 C E Top guide track Bottom track Lock B 32 1 D 190 187 45 64 Section 186 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 640 Bottom Rolling Endfold Boxed jamb 50 Note: These dimensions are critical 12 38 Note: These dimensions will change if doors in excess of 44 mm thickness are used Bottom roller Note: These dimensions are critical 12 38 50 6 Flush handle Bottom roller Note: The centre meeting joint detail is only required where suites containing an even number of doors meet within the opening 2, 4, 6 or 8 leaves one or both ways 6 3 Flush handle and flush bolt Flush handle with roller catch or flush ring handles with mortice lock 6 3 Flush handle and flush bolt x 73 foldaside hinges F Lever action flush bolts For folding doors. Bottom track to be drilled to accept strike plate. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 F 2, 4, 6 or 8 leaves one way with swing leaf on opposite jamb Bottom roller Joint for odd number of door panels Last leaf automatically becomes the access or pass door Note: These dimensions are critical 12 38 x 73 foldaside hinges Note: These dimensions will change if doors in excess of 44 mm thickness are used Foldaside butt hinges for all joints: G Economy washered butt hinge, x 76 mm With stainless steel washers to all joints. Stainless steel BS EN 1935 grade 6 Satin stainless steel 921.17.005 229 Flush handle with roller catch or flush ring handles with mortice lock 3, 5 or 7 leaves one or both ways Holdback catch 6 3 x 73 foldaside hinges Flush handle and flush bolt H Brass butt hinge x 73 mm. Unwashered with stainless steel pin Ø Max. adj. door weight 40 kg Bright polished 921.08.024 I Brass butt hinge x 76 mm. Double phosphor bronze washers with brass pin Max. adj. door weight 60 kg Polished 921.08.042 Order qty: 10 pcs J Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 K Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 J 35 8 19 4 Ø 13 76 Counterpiece 30 42 2.5 12 38 I 5.0 13 15.5 57 70 Nickel-plated illustration 2 3.5 Catch 76 G 5.0 J Counterpiece 30 41 2 12 56 70 Ø 10 3.5 15 Catch Bright brass illustration 73 H 13 K 5.0 41 28 3 68 89 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 187

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 640M Bottom Rolling Endfold Application: Bottom rolling internal or external folding doors constructed of metal box section frames Normally for commercial installations such as folding shopfronts Range Max. door weight 55 kg Max. door height 2.3 m Max. door width 830 mm Door thickness normally standard 44 mm profiles Up to 6 leaves may be hinged together in one suite. Floating folding suites not recommended Note: The first hinged leaf must be narrower than the other door leaves in the suite for geometric reasons. Please refer to the drawings at the top of page 189 where full setting out dimensions are shown. If further assistance is required please contact the Architectural Ironmongery Department 44 29 Packing (by others) A Top safety guide track Pre-drilled for countersunk screws. Galvanized steel to BS EN 10142 Length 2.1 m 941.80.821 3.0 m 941.80.830 (2.1 or 3.0 m length) A 44 29 B Top roller guide Suitable for severely restricted headroom. Must be fixed such that the centre line of the roller is plumb in line with the centre line of the bottom roller. May need to be sited on blocking piece depending on profile of metal box section. Steel with nylon roller 943..031 21 5 10 5 Ø 38 B 1 C Bottom roller For metal box section door panels. With needle bearing rollers and ball bearing swivels. Housed at bottom of door stile 943..0 D Bottom track, 10 x 21 mm Pre-drilled for countersunk screws. Brass Length 2.1 m 941.80.721 3.0 m 941.80.730 (2.1 or 3.0 m length) PLEASE NOTE: Bottom track also available in galvanized steel or stainless steel - Details on request For ancillary door fittings, hinges and locks etc, see page 142 Door thickness 44 mm only Always engage holdback catch before operating Fixing: Top channel normally soffit fixed Bottom track screwed to level cill to provide complete support to the underside of the running tread without voids. The bottom track must be level and the cill firmly fitted to prevent distortion or defection Installation of roller: Retention block or bracket by client should be sited inside metal box section so that weight of door carried effectively on top of roller unit As an additional fixing use short self tapping screws through wall of metal box section into roller box Extreme care must be taken to ensure screws do not penetrate or foul swivel mechanism Floor track unnecessary under swing leaves Steel or timber base Tie rod Support Packing Bottom roller Bottom roller 38 28 D 10 6 52 Foldaside hinge, x 73 mm C 21 These fittings may be used where door configuration has to be CENTRE FOLDING. Details and advice from HUK Architectural Ironmongery department Half leaf 3 Section 188 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 640M Bottom Rolling Endfold Boxed jamb 50 12 Note: These dimensions are critical Bottom roller Note: These dimensions are critical Dim X 6 50 Flush handle Bottom roller x 73 Foldaside hinges If door thickness is not 44 mm, or if door thickness varies, please contact the Architectural Ironmongery Department Foldaside butt hinges for al joints: 6 3 Dim X Normal dimension mm for 44 mm door thickness Flush handle and flush bolt 2,4 or 6 leaves one or both ways Flush handle with roller catch or flush ring handles with mortice lock Holdback catch or cabin hook to control access door 6 3 3 or 5 leaves one or both ways Flush handle and flush bolt x 73/76 Foldaside hinges E Stainless steel butt hinge x 76 mm. Drilled ANSI pattern. Two high quality ball bearing race joints. Stainless steel BS EN 1935 grade Satin stainless steel 926.92.100 Polished stainless steel 921.08.621 Order qty: Multiples of 2 pcs F Slimline flush bolt Fits to base of door - face fix only. Fully enclosed design - Minimum cut out required. Slide action. With keeper and fixings. Grade 316 stainless steel Satin 9.62.350 Polished 9.62.351 Ø 12 Bottom rail Top rail Plain stile Typical aluminium box sections used for folding doors F 22 Lever action flush bolts: Door box section needs to be cut to receive bolt body with suitable packer inside to receive screw fixing If bottom track option D (page 188) is used, the track may need to be cut to enable the striking plates to be fixed G Lever action flush bolt For folding doors. For door thickness 45 mm+. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 H Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 I Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 For ancillary door fittings, hinges and locks etc, see page 142 13 H 41 28 2.5 68 89 3 76 E 5.0 0 19 60 152 132 I 40 30 16 7 0 42 G 35 8 19 13 38 229 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 189

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 642 Bottom Rolling Endfold Application: Bottom rolling, normally internal folding doors for residential and commercial applications where return walls sufficiently deep to allow doors to fold through 180º Range Max. door weight 45 kg Max. door height 2.4 m Max. opening width 4.8 m Max. door leaf width 900 mm Max. door thickness 44 mm only Up to three leaves folding in each direction only, as additional leaves would make the system unstable since no top guide channel is used 3 Suggested head detail only Note: No top guide channel Ø 38 Door thickness only 44 39 /30/35/40 A Lever action flush bolts For folding doors. With adjustable shoot;, 30, 35 or 40 mm for added security. Brass Polished brass 900.17.860 Satin nickel 900.17.851 A 3 45 B Bottom roller Needle bearing roller, ball bearing swivels. Satin anodised aluminium and polished brass cover plates supplied for customers on site choice-discard those not required 943..010 5 Timber cill to be accurately machined to provide continuous support to bottom track B 190 187 C Bottom track Drilled and countersunk for fixing to timber. Brass Length 2.1 m 943..921 3.0 m 943..930 (2.1 or 3.0 m length) For ancillary door fittings, hinges and locks etc, see page 142 Door construction: Door thickness 44mm only. Door leaves are all equal width, but with swing leaves on folding suites reduce door leaf widths to 800 mm As bottom rollers are housed at bottom of stile, keep tenons of rail high to avoid cut-out With swing leaves always engage holdback catch before operating Fixing: Top track unnecessary, bottom track must be positioned exactly as shown on drawing Top of door is secured by flush bolt Bottom track screwed to accurately machined timber cill to provide complete support to the underside of the running trend without voids. The bottom track must be level and the cill firmly fitted to prevent distortion or deflection No top channel required Frame to panel foldaside hinges Track 3 doors open C 32 Fixing positions for ironmongery in a typical three panel application Flush handles Flush bolt Flush bolts Panel to panel Foldaside hinges Position of bottom track (angled across threshold) Plan of doors Bottom roller Mortice lock 64 Holdback catch Flush handles Section 190 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Foldaside 642 Bottom Rolling Endfold Flush handle Skirting * This dimension is critical 5* Doors closed x foldaside hinges Bottom roller 38 x 76 foldaside hinges 38 Bottom track Doors open x 76 foldaside hinges Holdback catch Bottom roller Examples of alternative door arrangements. All doors equal width Joinery detail and setting out for tracks D Foldaside projection hinge, x mm For frame to panel joints. Thrust bearing washers to each joint. Satin stainless steel or electrophoretic brass-plated BS EN 1935 grade 13 Satin 921.08.168 Brass-plated 926.91.018 E Brass projection hinge x mm. Double phosphor bronze washers with brass pin Max. adj weight 40 kg Polished 921.08.060 Order qty: 10 pcs F Foldaside hinge, x 76 mm For panel to panel joints. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 G Brass DPBW butt hinge Double phosper bronze washers. Brass pin Max. adjusted door weight 60 kg. Brass Length x width x 75 mm Polished brass 926.90.8 H Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 I Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 J Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 D H F 13 I 2.5 2.5 Ø 12 Ø 10 Counterpiece 30 42 2.5 12 41 28 3 76 68 89 13 15.5 57 70 Nickel-plated illustration 3.5 4.0 Catch 5.0 H Counterpiece 30 41 2 4 5 12 Ø G 56 70 E 75 Ø 3.5 15 Catch Bright brass illustration 5.0 0 5.0 19 60 152 132 For ancillary door fittings, hinges and locks etc, see page 142 J Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 191

Fittings for Bottom Rolling Sliding Folding Partition Doors Centafold 644 Bottom Rolling Centrefold Application: Bottom rolling internal or external centre folding doors. For openings without rebated heads or cills. For hospitals, schools, public houses, residences etc Range Max. door weight 60 kg Max. door height 3.6 m Max. opening width unlimited Max. door leaf width 1.2 m Door thickness 44 mm only Door construction Normally up to 7 1 /2 leaves may be hinged together. Loose floating suites of 5 and 7 leaves may be used with caution but access doors are not then recommended. Width of door leaves vary according to arrangements, and on wide openings where large numbers of door leaves are involved, apply for special layouts Important: Swing access leaves normally not recommended on folding suites, but where unavoidable reduce maximum door height to 3.0 m, leaf width to 800 mm and weight to 45 kgs. Swing access leaves on floating folding suites are particularly not recommended Thicker doors possible - details on request Suggested head detail only 44 30 Door thickness only 44 29 Bottom rollers must be plumb with top guides Bottom track must be plumb with top track 3 48 44 A Top safety guide channel Pre-drilled for countersunk screws. Galvanized steel to BS EN 10142 Length 2.1 m 941.80.821 3.0 m 941.80.830 (2.1 or 3.0 m length) 5 Timber cill to be accurately machined to provide complete support to bottom track A Ø 40 29 30 B Top roller guide Nylon roller, steel plate 941.80.030 (2 or 3 pcs required per panel) 45 B 130 5 C Bottom roller Needle bearing rollers, ball bearing swivels. Satin anodised aluminium and polished brass cover plates supplied for customers on site choice-discard those not required 943..012 D Bottom track Drilled and countersunk for fixing to timber. Brass Length 2.1 m 943..921 3.0 m 943..930 (2.1 or 3.0 m length) For ancillary door fittings, handles, hinges and locks etc, see page 142 Door construction: Door thickness 44 mm only Width of door leaves vary according to arrangements The half leaf is always hinged to jamb. Always engage holdback catch before operating if access door is included Fixing: Top channel normally soffit screw fixed Bottom track screwed to accurately machined timber cill to provide complete support to the underside of the running tread without voids. The bottom track must be level and the cill firmly fitted to prevent distortion or deflection. Floor track unnecessary under swing leaves Flush handles Hinges Flush bolts D Guides Rollers 32 162 Guide track Bottom track 190 Details showing 4 1 /2 leaves without access door 51 C 64 Elevation of top guide and bottom roller (must be plumb in line) Section 192 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Bottom Rolling Sliding Folding Partition Doors Centafold 644 Bottom Rolling Centrefold Example of 2 1 /2 leaves. One or both ways without access door Bottom roller Example of 4 1 /2 leaves. One or both ways where access doors are unavoidable Caution: Where no access panel arrange bi-parting doors so that rebates swing into each other. This is controlled by hinging half leaf right or left as required Foldaside hinge, x 73 mm E Lever action flush bolt For folding doors. Bottom track to be drilled to accept strike plate. Zinc die cast mazak alloy Pol. brass, lacquered 900.17.815 Satin nickel-plated 900.17.806 F Economy washered butt hinge, x 76 mm With stainless steel washers to all joints. Stainless steel BS EN 1935 grade 6 Satin stainless steel 921.17.005 G Foldaside hinge, x 76 mm For panel to panel joints. Thrust bearing washers to each joint. Satin or polished stainless steel or electrophoretic brass-plated BS EN 1935 grade 13 Satin stainless steel 921.08.140 Polished stainless steel 926.91.041 Brass-plated 921.08.159 6 Foldaside hinge, x 73 mm E Half leaf 229 Bottom 3 rollers When using swing doors engage holdback catch before operating partition 2 Ø Ø 10 76 F 5.0 Hold back catch 6 Foldaside hinge, x 73 mm Half leaf 3 Flush handle & flush bolt NB. This dimension will change if door in excess of 44 mm thickness are used G 2.5 Ø 10 76 5.0 4.0 H Brass butt hinge x 73 mm. Unwashered with stainless steel pin Max.door weight 40 kg Bright polished 921.08.024 I Brass DPBW butt hinge Double phosper bronze washers. Brass pin Max. adjusted door weight 60 kg. Brass Length x width x 75 mm Polished brass 926.90.8 J Twin ball catch To act as holdback catch on access door or to prevent door panel drift. Tension adjustable with a screw-driver. Solid chrome steel balls. Brass catch and counterpiece Bright brass 244..017 Nickel-plated 244..639 K Flush handle Fixing screws included. Brass Polished brass 910.37.035 Satin nickel plated 910.37.044 L Flush handle Normally used where door thickness is 50 mm or more. Fixing screws included. Stainless steel Satin 902.04.3 Polished 902.04.321 J 35 8 19 13 Counterpiece 30 42 2.5 12 13 K 38 13 15.5 41 28 57 70 Nickel-plated illustration 3 3.5 68 89 73 2 H 5.0 Catch J Counterpiece 30 41 2 4 12 I 56 70 75 Ø 3.5 15 Catch Bright brass illustration 0 19 60 152 132 L Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 193

Fittings for Sliding Folding Frameless Glass Partitions Application Examples HAWA-Variofold 80/GV, for sliding end folding frameless glass doors Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Glass Partner Network Architectural Ironmongery Sales and Support: Telephone: 01788 548855 (all regions) Telephone: 08 418 2435 (London region) Glass Partner Network Häfele UK offer a range of high quality rails, patch fittings, hinges and sliding door gear to suit framless glass doors From our experience of dealing with Architects and Specifiers we have noticed a demand for a complete supply and fit solution using our products. Our Glass Partners are an experienced network of glazing professionals, who can offer a high quality supply and fit service across the UK. Please contact us for further information. CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or e-mail cpd@hafele.co.uk Section 194 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Frameless Glass Partitions Product Guide Max. door Sliding Folding Frameless Glass Partitions panel weight HAWA-Variofold 80/GV for end folding, sliding frameless glass partitions.....................80 kg............196 HAWA-Centrefold 80/GV for centre folding, sliding frameless glass partitions..................80 kg............197 Metalglas L-1000 for end folding, sliding frameless glass walls.............................70 kg.........198-199 Metalglas L-1500 for end folding, sliding frameless glass walls.............................55 kg............0 Metalglas L-00 for centre folding, sliding frameless glass walls............................55 kg............1 HAWA-Centrefold 80/GV, for centre folding frameless glass partitions HAWA-Variofold 80/GV, for end folding frameless glass partitions L-1500, for end folding sliding frameless glass walls Fittings for sliding stacking glass partitions; product guide page 2 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 195

Fittings for Sliding Folding Frameless Glass Partitions HAWA-Variofold 80/GV Hawa HAWA-Variofold 80/GV Application: For top hung folding frameless glass doors in suites of 2,4 or 6 panels usually for commercial projects. Single pivot doors permitted. Range: Glass thickness- Toughened safety glass 10, 12 or 12.7 mm Laminated safety glass 10.6 -.8 mm Min. panel width 400 mm Max. panel width 900 mm Max. panel height 2600 mm Max. panel weight 80 kg Note: Top track cannot be curved Operation: Silver anodised aluminium top track carries weight of panels which are connected top and bottom only by hinges fixed to suspension and retainer profile. First door is pivoted and end capped. Main fittings supplied in packed sets separate from top track and bottom channel. Two door suites may be installed without bottom channel. Locks with Euro cylinder cut outs (works code 16760) available for installation in bottom profile Detailed installation drawing 16824 available on request 50 58 68±3 70 10 105 Hinge, satin chrome finish works code 16091 32 Examples of panel sets: 18 10 / 12 / 12.7 105 28 105 x 28 bottom channel in either aluminium or brass Set for 2 panel unit with pivot panel works code 16781 Set for 4 panels works code 16782 Set for 6 panel unit with pivot panel works code 16785 90 Z 5mm Clearance between wall and door Z + 50 36 59 4 18 36 Section 196 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Frameless Glass Partitions HAWA-Centrefold 80/GV Hawa HAWA-Centrefold 80/GV Application: Version of variofold to suit centre fold configuration for up to 5 1/2 glass panels. Access can be provided by single pivot doors from opposite jamb as no access doors permitted on centre folding suites. Range: Glass thickness- Toughened safety glass 10, 12 or 12.7 mm Laminated safety glass 10.6 -.8 mm Min. panel width 500 mm Max. panel width 900 mm Max. panel height 2600 mm Max. panel weight 80 kg Note: Top track cannot be curved Door suites up to 2 1/2 panels may operate without bottom floor channel. Technical details and options as for Variofold 80/GV system. Detailed installation drawing 168 available on request. 50 58 10 68±3 105 Hinge, satin chrome finish works code 16091 70 18 105 90 32 Examples of panel sets: 10 / 12 / 12.7 105 28 Sets for 2 1/2 panels works code 16788 x 28 bottom channel in either aluminium or brass Set for 3 1/2 panels and pivot panel works code 16791 Z 5mm Clearance between wall and door Z + 50 59 4 36 36 18 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 197

Fittings for Sliding Folding Frameless Glass Walls Metalglas L-1000 Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. Architectural Ironmongery Sales and Support: Telephone: 01788 548855 (all regions) Telephone: 08 418 2435 (London region) Metalglas In Northern Italy the art of metalworking has been handed down for centuries from generation to generation. These skills are combined with universally admired Italian design to create a stunning range of products. Häfele U.K. are proud to be the exclusive distributors for Metalglas. CPD seminars Häfele UK is a member of the RIBA CPD Providers Network and can currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please contact us or e-mail cpd@hafele.co.uk L-1000 sliding folding glass wall system, curved application Section 198 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Frameless Glass Walls Metalglas L-1000 Metalglas L-1000 Application: For folding glass panels in odd or even configurations. Up to 5 panels each side can be used to allow openings up to 10 m. Track can be curved. Ideal for commercial or residential applications Range: Glass thickness 8 or 10 mm Max. panel width 1000 mm Max. panel height 3000 mm Max. panel weight 70 kg Operation: Anodised aluminiun top track, 78 x 75 mm, with 8 wheel trolley hanger and forged brass hinges 6 9 mm gap W+27 W H 2 4 4 4 4 2 4W+60 W W W 42 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 199

Fittings for Sliding Folding Frameless Glass Walls Metalglas L-1500 Metalglas L-1500 Application: For frameless glass folding panels. Lighter duty version of L-1000. For residential and light commercial use. Up to 5 panels each way can be installed. Range: Glass thickness 8 or 10 mm Max. panel width 800 mm Max. panel height 00 mm Max. panel weight 55 kg Operation: Anodised aluminium top track 45 x 42 mm, with 4 wheel trolley hangers 6 9 mm gap W+27 W H 2 4 4 4 4 2 4W+60 W W W 42 Section 0 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Folding Frameless Glass Walls Metalglas L-00 Metalglas L-00 Application: Centre folding system without floor guide, for glass wall partitions. Up to 3.5 panels each way can be installed. Ideal for residential applications where stacking space is at a premium. Range: Glass thickness 8 or 10 mm Max. panel width 800 mm Max. panel height 00 mm Max. panel weight 55 kg Operation: Anodised aluminium top track 45 x 42 mm, with 4 wheel trolley hangers 6 9 mm gap W/2-9 W 2 4 4 H W W 4 2 42 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 1

Fittings for Sliding Stacking Timber Partitions Application Examples Hawa HAWA-Aperto 60/H for sliding stacking light/medium duty timber partitions HAWA-Aperto 60/H for sliding stacking light/medium duty timber partitions Section 2 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Timber Partitions Product Guide Sliding Stacking Systems - General System selector and possible panel configuration layouts 4-5 Max. door Fittings for Sliding Stacking Timber Partitions panel weight HAWA-Aperto 60/H..............................................................50 kg.........6-7 HAWA-Variotec 150/H...........................................................150 kg......... 8-9 HAWA-Separo 400/H............................................................400 kg............210 HAWA-Aperto 60/H for sliding stacking top hung timber doors HAWA-Variotec 150/H for sliding stacking top hung timber doors HAWA-Variotec 150/H for sliding stacking top hung timber doors Fittings for sliding stacking glass partitions; product guide page 2 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 3

Fittings for Sliding Stacking Partitions System Selector and Panel Configuration Layouts Hawa Selecting the sliding stacking system that is most suitable for your application is a two stage process: Firstly decide which system achieves the result you are looking for, by reference to the door panel material to be used, the door panel weight and the visual appearance being sought. The product selector below will enable this decision to be taken. Secondly decide which panel configuration layout you require with reference to the examples given below and on the following page Panel Material Metal/Timber Frameless Glass Panel Weight Panel Weight up to 60 kg 60 to 150 kg 150 to 400 kg up to 60 kg up to 150 kg 150 to 400 kg System Aperto 60/H System Variotec 150/H System Separo 400/H System Aperto 60/GL Patch Fittings System Shopfront 400/G Yes No Please see pages 6-221 for full descriptions and details of the individual systems indicated System Cornertec 150/GV Yes Full Aluminium Frame No System Variotec 150/GR System Variotec 150/GV Please note: All of the different systems indicated in the product selector are capable of achieving all of the panel configuration layouts detailed below: Type 98/99 Two or more panels form a flush partition when all are in the fully closed position (a) To open, one of the panels slides backwards and then across, coming to rest behind/in front of one of the other panels which is fixed Please note the sliding panel can only move in one direction - left or right A minimum of four panels form a flush partition when all are in the fully closed position (b) To open, the two inner panels slide backwards and then across, one to the left and one to the right where they come to rest behind/in front of the respective left and right outer panels which are fixed Type 100/101 Two panels form a flush partition when both are in the fully closed position (c) To open, one panel slides backwards and across (1) and the other simply slides across (2), so that a stack of two panels is formed, perhaps inside a wall cavity, completely clear of the line of the opening, when both panels are in the fully open position Three panels form a flush partition when all are in the fully closed position (d) To open, the first panel (1) slides forwards and across, the second panel (2) slides backwards and across, and the third panel (3) simply slides across. In this way a stack of three panels is formed, perhaps inside a wall cavity, completely clear of the line of the opening, when all three panels are in the fully open position (a) (b) (c) (d) Type 98/99 Example of door configuration with one door Example of door configuration with two bi-parting doors Type 100/101 1 2 Recess for doors Example of door configuration with two doors 1 2 3 Example of door configuration with three doors Section 4 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Partitions System Selector and Panel Configuration Layouts Hawa Type /103 - parallel stacking Three or more panels form a flush partition across an opening, when all are in the fully closed position To open, each panel may individually slide to the same side, where they enter a stacking area, and form a stack of panels completely clear of the line of the opening (type a) Alternatively the first panel may be a pivoted panel, which swings through 90 to open, thereby allowing the other panels to individually slide across and into the stacking area, which is within the line of the opening The first panel then swings back into it s original position, forming in effect the last panel into the stacking area (type b) Alternative stacking positions and arrangements are possible - contact the Architectural Ironmongery Department for further information Type /103 - Parallel Stacking a) Example of door configuration with three doors b) Example of door configuration with three doors - Pivoted door can be provided to close off door panel storage area Pivoted door Small hinged panel to seal gap caused by track curve Type 105/106 - Cornaway Any number of panels form a flush partition across an opening when all are in the fully closed position To open, the panels slide individually, either half to one side and half to the other (type a) or all to one side (type b) The panels then slide around a tight 90 track curve or curves, and then come to rest in a flush line alongside a side wall or walls, depending on the application type n all cases, a small hinged panel or panels is necessary to seal the gap caused by the 90 track curve(s), as shown Type 105/106 - Cornaway Small hinged panels to seal gaps caused by track curves a) Example of application where doors slide and park along two opposite side walls b) Example of application where doors slide and park along one side wall Type 1/2 - perpendicular (90 ) stacking Three or more panels form a flush partition across an opening, when all are in the fully closed position To open, each panel may individually slide to the same side, where they turn through 90 before entering a stacking area where they form a stack of panels completely clear of the line of the opening (type a) Alternatively the first panel may be a pivoted panel, which swings through 90 to open, forming in effect the first panel into the stacking area The other panels then individually slide across, where they turn through 90, before entering the stacking area, which is within the line of the opening (type b) Alternative stacking positions and arrangements are possible - contact the Architectural Ironmongery Department for further information Type 1/2 - Perpendicular (90 ) Stacking a) Example of door configuration with four sliding doors b) Example of door configuration with four doors - 1 pivot door, 3 sliding doors Examples of system selection - i.e. once the two stage selection process as indicated on page 4 has been completed e.g.) Timber panels each weighing 0 kg, required to follow panel configuration layout type 100/101 System required = Separo 400/H, type 100/101 e.g.) Frameless glass panels each weighing 100 kg, to incorporate patch fittings and required to follow panel configuration layout type 1/2 System required - Cornertec 150/GV, type 1/2 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 5

Fittings for Sliding Stacking Timber Partitions HAWA-Aperto 60/H Hawa HAWA-Aperto 60/H sliding stacking system for light/medium duty timber partitions Application: Purpose made top hung system for lighter weight timber partitions. Highest quality operation is combined with price economy to offer an attractive architectural solution. Components are standardised and available to order in packed sets which not only reduces delivery periods but also makes installation a quick and easy process. The system allows a completely flush partition when all of the panels are fully closed, and also requires only minimal stacking area space, which results in a reduced encroachment into the opening width when all of the panels are fully open. Previously impractical designs, such as partitions from a counter top to ceiling are now possible with the system, also ideal for most residential and commercial floor to ceiling partitions where individual door panels are of a lighter construction. Range: Panel weights up to 60 kg Panel thickness 35-50 mm* Panel width normally 550-950 mm** Max. panel height 2600 mm *Min. mm panel thickness with special door construction - details available on request ** Panel width shown for standard applications, other door sizes may be possible on request Full installation instructions are supplied on delivery and are available beforehand on request to assist design Features: Top tracks and bottom guide channels in satin anodised aluminium Vertical adjustment ±3 mm to assist installation and adjustment Standard application stacking area able to accommodate up to 9 panels, meaning an overall opening width of up to 8500 mm is possible Parallel and perpendicular (90 ) stacking arrangements are available as standard applications An entire installation can be secured with a single lock Standard sliding and pivoted panels can be incorporated A bottom guide channel is normally recommended but clear threshold applications are possible for reduced panel sizes Please contact our Architectural Ironmongery Department for further information Installation drawings reference 18337 parallel and reference 18338 90º For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner 7±3 8±3 48 16 50 16 35.5 Ø 15 35-50 16 28 60 4 Stacking area: Elegantly engineered curves Floor guide: No level differences Stacking at 90º to the side axis For loft apartments and office partitions, etc. Stacking parallel to the side axis Section 6 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Timber Partitions HAWA-Aperto 60/H Hawa HAWA-Aperto 60/H sliding stacking system for light/medium duty timber partitions Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 7

Fittings for Sliding Stacking Timber Partitions HAWA-Variotec 150/H Hawa HAWA-Variotec 150/H sliding stacking system for timber partitions Application: A top quality sliding stacking system able to accommodate large timber partition panels of up to 150 kg in weight. A modular track system incorporating high performance track curves gives complete freedom of design, making possible a huge range of panel layout configurations, including curved partitions. Great flexibility in parking area designs is also integral to the system, enabling the use of all available opening space to be maximised. Test certificates available on request from the Landesgewerbeanstalt Bayern (LGA) in Nürnberg, to confirm the high level of functionality and resistance to wear of the system Range: Max. panel weight 150 kg Min. panel thickness normally 40mm* * but 50 mm if integral brush seals are required Max. panel width normally 1 m* * to facilitate ease of operation. Wider panels may be possible on request Max. panel height unrestricted Full installation instructions are supplied on delivery and are available beforehand on request to assist design Features: Top tracks and bottom guide channels in satin anodised aluminium Vertical adjustment +6/-3 mm to assist installation and adjustment Parallel and perpendicular (90 ) stacking arrangements are possible, with a wide range of individual design possibilities Alternative trolley hangers are available for panel weights up to 100 kg and 150 kg respectively Standard sliding and pivoted panels can be incorporated Top quality track and channel curves provide exceptionally smooth and quiet cornering and general operation A bottom guide channel is normally recommended but clear threshold applications are possible in principle Please contact the Architectural Ironmongery Department for further information Installation drawing reference 14158 For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner Layout examples Without integral brush seals 63 26 32 93 10 103 +6-3 34 34 10 28 With integral brush seals M8 36 46 46 Section 8 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Timber Partitions HAWA-Variotec 150/H Hawa HAWA-Variotec 150/H sliding stacking system for timber partitions Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 9

Fittings for Sliding Stacking Timber Partitions HAWA-Separo 400/H Hawa HAWA-Separo 400/H sliding stacking system for heavy timber partitions Application: A well proven heavy duty sliding stacking system to accommodate the largest timber partition panels of up to 400 kg in weight. High quality stainless steel top tracks and aluminium bottom guide channels are factory manufactured to individual application requirements and preserve a smooth and quiet sliding operation despite the high load rating. Suitable for applications where robust usage is likely such as shopping centres, public buildings, industrial premises, etc. Complete flexibility in track curves and stacking areas allows a wide range of panel layout configurations to be designed Range: Max. panel weight 400 kg Min. panel thickness normally 65 mm* *but thinner panels down to 50 mm min. may be possible on request Max.panel width unrestricted Max.panel height unrestricted Full installation instructions are supplied on delivery and are available beforehand on request to assist design Features: Top track in stainless steel (grade 304) Bottom guide channel in satin anodised aluminium Two wheeled trolley hangers incorporating steel wheels and sealed self lubricating bearings for maximum strength and durability Parallel and perpendicular (90 ) stacking arrangements are possible with a wide range of individual design possibilities Standard sliding and pivoted panels can be incorporated Top quality track and channel curves provide exceptionally smooth and quiet cornering and general operation A bottom guide channel is always recommended For examples of sliding stacking installations, see page 9 130±6 53 77 106 50 Min. door thickness 65 mm 26 32 34 10 28 Examples of door configurations available: HAWA Separo 400H Sliding panels stacked parallel to the closing plane HAWA Separo 400H Sliding panels stacked at an angle to the closing plane Section 210 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Glass Partitions Product Guide Max. door Fittings for Sliding Stacking Glass Partitions panel weight HAWA-Aperto 60/GL.............................................................60 kg.........212-213 HAWA-Variotec 150/GV.......................................................... 150 kg......... 214-215 HAWA-Cornertec 150/GV........................................................150 kg.........216-217 HAWA-Variotec 150/GR..........................................................150 kg.........218-219 HAWA-System 400/G............................................................400 kg.........2-221 Metalglas Balconglas............................................................60 kg.........222-2 Dorma-HSW-1SO...............................................................1 kg.........226-227 HAWA-Variotec 150/GR for sliding stacking top hung glass doors Fittings for sliding stacking timber partitions; product guide page 3 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 2

Fittings for Sliding Stacking Glass Partitions HAWA-Aperto 60/GL Hawa HAWA-Aperto 60/GL sliding stacking system for light/medium duty glazed partitions Application: Purpose made top hung system for lighter weight fully glazed full height room partitions. Highest quality operation is combined with price economy to offer an attractive architectural solution. Components are standardised and available to order in packed sets which not only reduces delivery periods but also makes installation a quick and easy process. The system allows a completely flush partition when all of the panels are fully closed, and also requires only minimal stacking area space, which results in a reduced encroachment into the opening width when all of the panels are fully open. Previously impractical designs, such as partitions from a counter top to ceiling are now possible with the system, also ideal for most residential and commercial floor to ceiling partitions where individual glazed panels are of a lighter construction. Range Maximum weight per panel 60 kg Glass thickness (toughened safety glass) 8/10 mm Maximum panel height 2600 mm Minimum panel width 500 mm Maximum panel width - stacking 90º, sliding or pivot door 950 mm - stacking parallel, sliding door 00 mm - stacking parallel, pivot door 10 mm Features: Top tracks and bottom guide channels in satin anodised aluminium Vertical adjustment ±3 mm to assist installation and adjustment Standard application stacking area able to accommodate up to 1 pivot door, 8 sliding doors, meaning an overall opening width of up to 10,000 mm (parallel stacking) is possible Parallel and perpendicular (90 ) stacking arrangements are available as standard applications An entire installation can be secured with a single lock - further information on request Standard sliding and pivoted panels can be incorporated A bottom guide channel is normally recommended but clear threshold applications are possible for reduced panel sizes Please contact our Architectural Ironmongery Department for further information For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner 58±3 34 16 48 16 30 8/9.5/10 50 8±3 65 8±3 8±3 Ø 8/9.5/10 65 16 Installation drawing reference 191 (90º) Stacking at 90º to the side axis 10 45 14 9 168 Only use toughened safety glass Ø 15 Door panel configurations The system is supplied in packed sets, which include standard track stacking areas that can accommodate up to nine panels of a width up to the stated maximum. There are two standard stacking area types and both can incorporate an integral pivoting door. Curved applications and changes of direction are also available Please contact our Architectural Ironmongery Department for further information Stacking at parallel to the side axis Installation drawing reference 190 (parallel) Section 212 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Glass Partitions HAWA-Aperto 60/GL Hawa HAWA-Aperto 60/GL sliding stacking system for light/medium duty glazed partitions Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 213

Fittings for Sliding Stacking Glass Partitions HAWA-Variotec 150/GV Hawa HAWA-Variotec 150/GV sliding stacking system for glazed partitions Application High quality and extremely versatile sliding stacking system able to accommodate large glazed panels of up to 150 kg in weight Advanced technology gives the system unique qualities amongst sliding hardware systems and provides complete solutions, including stationary glazed panels, for room division and separation The modular track system, incorporating high performance track curves gives complete freedom of design, making possible a huge range of panel layout configurations, including curved partitions (see Fig 1 - layout examples) Great flexibility in parking area design is also integral to the system, enabling the use of all available opening space to be maximised (see Fig 1 - layout examples) State of the art two point suspension trolley hangers allow glazed panels to be moved extremely quietly and smoothly along the curved tracks, making the system ideal for use wherever high quality, elegant appearance and quiet operation are design requirements e.g. shopping centres, hotels, restaurants, banks,airports, railway stations, winter gardens, administrative buildings etc. Range Panel weights up to 150 kg Glass thickness 10/12 mm Maximum panel width normally 1000 mm to facilitate ease of operation, but wider panels may be possible on request Maximum panel height 3500 mm Full installation instructions are supplied on delivery and available beforehand on request to assist design Features Top tracks and bottom guide channels in satin anodised aluminium Horizontal glass suspension and retainer profiles (type GV) supplied in aluminium mill finish for customers own plating or powder coating finishing processes. Alternatively can be supplied with a variety of plated metallic or RAL colour reference powder coated finishes to order Vertical adjustment +6/-3 mm to assist installation and adjustment Parallel and perpendicular (90 ) stacking arrangements are possible with a wide range of individual design possibilities Alternative trolley hangers available for panel weights of up to 100 kg and 150 kg respectively Standard sliding, pivoted and sliding pivoted panels can be incorporated (see Fig 2 - door types) Top quality track and channel curves provide exceptionally smooth and quiet cornering and general operation All locking and operational hardware fully concealed within the horizontal glass suspension and retainer profiles A bottom guide channel is normally recommended but clear threshold applications are possible in principal Please contact the Architectural Ironmongery Department for further information For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner Fig. 1 Layout examples Layout examples The layout examples shown here clearly demonstrate the flexibility of the HAWA-Variotec 150/GV system, as well as the creative potential it offers. This system permits the use of stationary glass fittings, pivoting doors, sliding pivoting doors and curved installations etc. Upon request, each track can be customised for almost every curvature radius (minimum 4000 mm) Space saver The mobility of HAWA-Variotec 150/GV and its elegant design make it possible to save a considerable amount of space. It can stack in even the smallest of spaces Fig 2 Door types Sliding panel Sliding pivoted panel Pivoted panel Section 214 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Glass Partitions HAWA-Variotec 150/GV Hawa Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 215

Fittings for Sliding Stacking Frameless Glass Partitions HAWA-Cornertec 150/GV Hawa HAWA-Cornertec 150/GV sliding stacking system for frameless glass partitions incorporating corner suspension patch fittings Application: A visually appealing sliding stacking system able to accommodate large frameless glass panels up to 150 kg in weight. The aesthetically desirable benefits of frameless glass is maximised as small corner suspension points replace the need for full panel width suspension profiles. Cover plates in four high quality metallic effect finishes ensure the system can be integrated into existing applications and incorporated into new build projects with ease. The system is supplied in a packed set format for applications of up to ten panels. This together with standardised stacking areas and considerable integral adjustment, means that in most cases, time consuming track line planning is not necessary. Hence the ordering process is simplified with all components available ex works in Switzerland. Range: Max. panel weight 150 kg Glass thickness 10/12 mm Max. panel width unrestricted Max. panel height 3500 mm Full installation instructions are supplied on delivery and are available beforehand on request to assist design Features: Top track and bottom guide channel in satin anodised aluminium Vertical adjustment +6/-3 mm to assist installation Parallel and perpendicular (90 ) stacking arrangements are possible as standard set applications Alternative trolley hangers are available for panel weights up to 100 kg and 150 kg respectively Standard sliding and pivoted panels can be incorporated Aesthetically pleasing with a maximum amount of glass left uncovered by obtrusive hardware Top quality track and channel curves provide exceptionally smooth and quiet cornering and general operation Important - For standard set applications, a bottom guide channel is unnecessary. However, a channel together with additional bottom guide patch fittings can be supplied to order if required For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner 63 103 (+6, -3) 62 62 32 93 10 105 105 10 28 Section 216 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Frameless Glass Partitions HAWA-Cornertec 150/GV Hawa HAWA-Cornertec 150/GV sliding stacking system for frameless glass partitions incorporating corner suspension patch fittings Small corner suspension points replace the need for full width suspension profiles Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 217

Fittings for Sliding Stacking Tall Glass Panels HAWA-Variotec II 150/GR Frame Profile Hawa HAWA- Variotec II 150/GR frame profile Frame profile for all-glass sliding walls up to 150 kg panel weight Suitable for HAWA-Variotec II and HAWA- Combitec type applications HAWA-Variotec frame profile features: Slimline design (frame profile is just 24 mm wide) meets the highest aesthetic requirements Can be installed with toughened safety or laminated glass panels No need to drill holes through the glass Increased rigidity, ideal for installations with tall doors Straightforward inventory Individual changes of direction from 15 to 90 Installations with curved tracks are also possible May be combined with standard HAWA Variotec components like locks, glass retention profiles, trolleys, etc. Vertical wall joint profiles accommodate construction tolerances of ±8 mm on each side For further planning details on sliding stacking systems (timber and glass) visit www.hawa.ch and launch the System Planner 93 10 105 105 28 63 Section 218 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Tall Glass Panels HAWA-Variotec II 150/GR Frame Profile Hawa up to 15 45º Typical fittings Features of the HAWA-Variotec II 150/GR frame profile Modular system Filigree frame system with just 24 mm visible width Changes in direction between 16 and 90 are possible Maximum panel weight 150 kg Recommended maximum panel height 3500 mm For use with toughened safety glass 10, 12 and 12.7 mm For use with laminated safety glass up to 13 mm No glass cut-outs required Protects against draughts Enhanced rigidity for tall glass structures All hardware built-in to the profile Secure locking For further planning details on sliding *stacking systems (timber and glass) visit www.hawa.ch and launch system planner Layout examples Changes of 16 to 90 90º Changes of direction Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 219

Fittings for Sliding Stacking Heavy Duty Glazed Partitions HAWA-System 400/G Hawa HAWA-System 400/G sliding stacking system for heavy duty glazed partitions Application A well proven heavy duty sliding stacking system to accommodate the largest frameless glass partition panels of up to 400 kg in weight High quality stainless steel top tracks and aluminium bottom guide channels are factory manufactured to individual application requirements and preserve a smooth and quiet sliding operation despite the high load rating Suitable for applications where robust usage is likely such as shopping centres, public buildings, industrial premises or any location where extremely large glass panels need to be moved. Complete flexibility in track curves and stacking areas allows a wide range of panel layout configurations to be designed Range Max. panel weight 400 kg Glass thickness 10-18 mm Max. panel width Unrestricted Max. panel height 4000 mm Features Top track in solid stainless steel (Grade 304) Bottom channel in satin anodised aluminium Horizontal glass suspension and retainer profiles supplied in aluminium mill finish for customers own plating or powder coating finishing processes. Alternatively can be supplied with a variety of plated metallic or RAL colour reference powder coated finishes to order Parallel and perpendicular (90 ) stacking arrangements are possible with a wide range of individual design possibilities Standard sliding and pivoted panels can be incorporated Top quality track and channel curves provide exceptionally smooth and quiet cornering and general operation Private house with type 98 patio doors (see page 4) 106 53 130±6 77 94 50 26 10-18 26 92 10 28 Section 2 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Heavy Duty Glazed Partitions HAWA-System 400/G Hawa Possible panel layout configurations incorporating either parallel or perpendicular (90 ) stacking area arrangements Lime St. Station, Liverpool Anti lift device 86 Glass cut-outs Before the frameless glass panels are toughened or sand blasted etc., cut-outs must be made to accommodate the glass holder inserts which provide a mechanical means of connecting the suspension and retainer profiles to the glass panels 12 Ø 21 85 85 Safety lock fitting concealed within glass suspension and retainer profile N.B. For curved applications the minimum track line radius is 1000 mm Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 221

Fittings for Sliding Stacking Glass Walls Metalglas Balconglas Metalglas Balconglass Application: System for top hung sliding stackable glass walls with hinged access door, with sturdy floor and ceiling guides and no protruding stacking area due to the design. Ideal for applications where a balcony or terrace needs protection from the wind and rain to give all year round usage, and can be easily opened. Suitable for residential and light commercial applications such as: Wintergardens Large apartment balconys Terraced bars Outdoor dining areas Range: Max. panel height 2800 kg Max. panel width 800 mm Max. panel weight 60 kg Glass thickness 8/10 mm Stacking at 90º to the side axis Section 222 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Glass Walls Metalglas Balconglas Two bottom guiding options Built in guide Visible guide Terrace application Balcony application Series of sliding stacking glass panels with first panel as normal hinged window Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 223

Fittings for Sliding Stacking Glass Walls Metalglas Balconglas Operation: Each panel moves quietly and effortlessly to the parking area A. The last trolley hanger on each door then disengages from the top track to allow the panel to pivot into the stacked open position B and C B A B C Changes of direction are possible as well as a curved track for faceted door Section 224 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Glass Walls Metalglas Balconglas Change your balcony or your terrace into a living space The all-glass Balconglas system means you can enjoy: Landscape viewing Protection against rain - wind Easy handling Quick cleaning This system is designed for outdoor unheated areas but where protection from wind and rain is required. For advice on fully weathered systems and advice regarding complying with building regulations please contact our technical team Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 2

Fittings for Sliding Stacking Double Glazed Walls Dorma HSW-ISO Dorma HSW-ISO System Application: Sliding stacking movable wall system for double glazed panes - Ideal for residential and commercial applications where compliance is required with building regulations - Part L - England and Wales, Part J - Scotland or Part F - Northern Ireland Double glazing with thermal-break frame profiles Range: Max. system height 3000 mm Max. panel width 00 mm Max. panel weight 1 kg Panel types These double-glazed panels with their frames of thermal-break profiles (frame material group 2.1) offer outstanding protection against the influences of the weather, effective thermal insulation and comfortable temperatures - even close to the frontage surface - during seasonal changes and in the winter months. And all these effects are ideally enhanced by laterally arranged, interlocking multiple-lip seals plus automatically extending top and bottom rubber seals that are pressed against the track rail and floor when the frontage is closed Order details Please contact the Architectural Ironmongery department with details of the opening to arrange a quotation or site visit from a Häfele project manager Single action door - Single action panel, non-sliding, equipped with TS 92/93 door closer Sliding panel - Fixed when frontage close Single action sliding panel - Single action sliding panel, with TS 92/93 cam-action door closer, operational when frontage closed Fixed screen - Non-sliding side screen with top retaining brackets and bottom rail Section 226 Prices Stock Availability Product Information Ordering www.hafele.co.uk

Fittings for Sliding Stacking Double Glazed Walls Dorma HSW-ISO Irrespective of the function of the individual panels, an HSW-ISO system comprises the following basic components: 1 Installation-efficient DORMA substructure to accomodate track rail mounting requirements (optional) 2 Track rail for bolting to the substructure 3 Carrier 4 Suspension assembly and bearing profile for safe and easy sliding of the panels 5 Glazing rail 6 Sealed double glazing unit (by others) 7 Automatically extending rubber seal 8 Insulating strips in the thermal-break profile 9 Bottom frame profile 75 72 1 2 75 3 4 7 33 ±5 67 45 8 59 37 104 16 22 5 Horizontal sections of the sliding panels with connection details Sliding panel to wall connection profile 6 Outside 77 5 37 64 64 16 22 59 54 6 Inside Sliding panel to sliding panel Outside 5 77 59 16 22 59 6 76 Inside 16 22 9 7 16 64 22 128 106 7 8 FFL 6 5 Sales and Technical Support Tel: 01788 548855 (all regions) Tel: 08 418 2435 (London region) Section 227

Häfele U.K. Ltd Technical Advice Häfele U.K. Ltd - for expert technical advice and customer service Glass Partner Network Specialist Sales Team Because the range of fittings we offer is so comprehensive we have, at Häfele, a Specialist Sales Team to give you expert advice and service. The Team includes Dip GAI certificate holders and Registered Ironmongers who have years of experience supplying the industry. We offer a comprehensive free scheduling service, a free recommendation and quotation service for all our systems, and technical advice. If you have any queries about your order or our products please contact: Architectural Ironmongery Sales and Support All regions: Head Office Telephone: 01788 548855 Fax: 01788 548850 E-mail: ai@hafele.co.uk London region: London Office Telephone: 08 418 2435 Fax: 08 418 2439 E-mail: london.ai@hafele.co.uk Log on to www.hafele.co.uk for Product information New products Technical advice, including link to HAWA product finder and system planner Häfele office and staff contact details CPD (Continuing Professional Development) seminars All chartered members of the RIBA are obliged to do CPD every year. Häfele U.K. is a member of the RIBA CPD Providers Network and can offer architects and other construction professionals RIBA-assessed, high-quality CPD core curriculum material. We currently offer the following free of charge seminars on: The what, why and where of sliding door gear Frameless glass fittings for doors, screens and canopies Defining electronic access control For further information please e-mail cpd@hafele.co.uk Showrooms At head office and at some of our regional offices our showrooms provide customers with the opportunity to view the many products which we stock. If you d like to take a look around our showrooms please call your Sales Representative or your sales office to arrange a visit. Section 228 Prices Stock Availability Product Information Ordering www.hafele.co.uk