Main catalogue. Terminal blocks Explosive atmospheres protection

Main catalogue Terminal blocks Explosive atmospheres protection

: The best in connection Introducing the new ATEX certified terminal block range The following pages are meant to provide you with some basic information relative to the ATEX directive and protection methods particularly suitable for terminal blocks. We insist on the increased demand for safety required by the ATEX directive and describe what has been the design and manufacturing choice of ABB to provide you with true security products. As one of the world leaders in connection technology and the world s leading supplier to the oil and gas transportation industry, ABB is pleased to introduce you to its dedicated terminal block range for safe use in explosive atmospheres. The range is certified to the highest possible certification level of the new ATEX 94/9/EC European directive and offers maximized safety to offer you true security products. Safe use and Applications Comprehensive range The ATEX terminal block range provides terminal blocks in the three main technologies: screw clamp, spring clamp and AO system in feed through (grey), neutral (blue) and ground versions. ABB ATEX terminal block range is available in V0 (per UL94) material. As we are constantly extending our product portfolios, please do not hesitate to contact your local sales if you would like to request an ATEX certified terminal block not mentioned in these pages. ABB s dedicated ATEX range is designed and certified for use in all industries with potentially explosive atmospheres caused by gas or dust inflammation such as: petrochemical industries, off shores installations, mines industries, flour mills, silos etc idac 04055 SNC 60 004 C00

Atex generalities A. Explosive atmosphere... B. European explosion directives... 4 C. ATEX 94/9/EC conformity assessment procedures... 8. Protection methods in potentially explosive atmosphere... 0 E. Product marking... F. terminal blocks & accessories certification... 3 Atex certified terminal blocks range Summary... 5 Summary 040507 SNC 60 004 C00

A. Explosive atmosphere Conditions An explosion can occur if the following factors are combined: Presence of inflammable substances Presence of an ignition source or inflammation source: fire, flame, electrical or mechanical sparks, overheated surfaces, electrostatic discharges Oxygen Inflammable substances can be listed as follow : Inflammable gas Inflammable liquid Inflammable dust - Liquid gas: butane, butene, - Solvents, fuel, oil, heating oil, - Coal propane, propylene painting, chemical substances - Wood dust - Smoke: carbon monoxide, - Human and animal food methane. products : sugar, flour, cereal - Chemical gas substances : - Plastic material acetylene, acetylene oxide, - Metal vinyl chloride Ignition source: Electrical energy may be dangerous if used close to an inflammable substance as it is considered as a potential source of ignition. Indeed, sparks, arcs or dangerous temperature levels are generated by the electrical energy. Protection: Particular methods of protection have thus been investigated in order to allow the use of electrical equipment in hazardous areas. Concerned industries The risk of explosion is particularly high in certain types of industries, which generate inflammable gas, inflammable liquid or inflammable dust. Indeed, the new ATEX directive now considers the explosion risk caused by dust. We can list : Refineries, Petrochemical and chemical industries, Off shore installations, Mining industries, Human and food industries Pages 04058 SNC 60 004 C00

The risk can be expressed as follow : Industries Refineries Petrochemical and chemical industries Risks Treatment of hydrocarbon highly inflammable Transformation and treatment processes which can generate explosive mixing Pharmaceutical and cosmetic industries Use of alcohol highly inflammable like solvents Use of active material or adjuvant which can create explosive dust Waste and water recycling industries Paper or plastic dust Storage of barrels or containers partially or not emptied Gas fermentation emission during water treatment Painting facilities Over spray formation during the lacquering of surfaces with spray gun Gas distribution Gas/ air mixing creation if gas leaking Human and animal food industries Transport and stocking of cereal, powder which can create potentially dust explosive atmospheres in filters and aerators Wood saw mills, metal machining Metal dust generation during metal polishing which can create dust explosive atmospheres in collectors Pages 04058 3 SNC 60 004 C00

B. European explosion directives ATEX European directive consists in two parts : ATEX 94/9/EC (generally called ATEX 95), which concentrates on the duties of the manufacturers. ATEX 999/9/EC (generally called ATEX 37), which focuses on the end users obligations. irective applicable to ABB Entrelec "terrminal blocks" The objectives of the directives Minimum requirements is a key phrase of the directives - member states are free to introduce more stringent measures if they wish. ATEX belongs to the group of the so-called new approach directives. Under a new approach directive, any route towards achieving the objective is permitted. The European commission will not interfere with how a technical solution is reached, but gives all parties involved the freedom to define the best means, methods and procedures to meet the guidelines. This gives rise to a division of responsibilities between the equipment manufacturer and the end user. The less responsibility the equipment manufacturer assumes for achieving the solution, the more the end user will have to take on, and vice versa. 4 Pages 04058 SNC 60 004 C00

ATEX 95 : Equipments and components The objective of the ATEX 95 directive is to reinforce safety aspects. It is more restricting than the former directive 76/7 EEC, as it does not only concentrate on the product but on the whole process. The manufacturer s quality assurance is now audited through the relevant standard NF EN 3980 Potentially explosive atmospheres - Application of quality systems. Extract of the EN 3980 7.5.3: The manufacturer shall establish and maintain procedures for product identification during all the stages of production, testing, final inspection and placing on the market. Traceability is required with respect to final product and its significant parts. The production quality assurance notification is the highest assurance quality certification level achievable. ATEX products are considered as safety devices: the entire process from the design to the installation must be strictly controlled. Product and company quality assessment which allow design, manufacturing and sales. Requirements in terms of organization for designing, manufacturing and selling. ABB commitments versus ATEX 95 Terminal blocks are unitary controlled - unitary dielectric control on finished product Maximized security is guaranteed through dedicated manufacturing processes, dedicated manufacturing sites and dedicated inventory locations. Reinforced traceability for accurate identification of the ATEX customers through dedicated part numbers for the ATEX range and batch number registration. ATEX 37 : Installations The addition of the new workers directive ATEX 37 reinforces the safety level even further. Risk analysis : requires that the employers draw up evidence of risk analysis for their site. Area classification : area classification into zones and site inspections must be carried out where potentially explosive atmospheres may develop. Explosion protection document : Information such as written instructions, training programs, and clearance for work must be defined in the explosion protection document and respected in order to guarantee the protection of the staff. ATEX certified products must be selected according to zone. Locations where explosive atmospheres may occur and identified through warning signs. ABB commitments versus ATEX 37 Reliable product information is given to the end user : increased safety and intrinsic safety certified terminal blocks for safe installation. Excellence of AO system in regards to the ATEX 37 minimum requirements (training programs, written instructions, clearance for work ) : - Simplified clearance for work : no possibility of unauthorized modifications thanks to the AO system dedicated tool (OUMA, OUPA or OUTA). - Maximized correct installation and operation, qualification of the personnel : the AO system connection is operator independent. - No retightening maintenance : AO system is a Screwless technology. ates of enforcement ATEX 95 : Equipment and components From July st 003, equipment, protection systems and electrical components used in potentially explosive atmospheres must comply with the European directive ATEX 94/9/EC (ATEX 95). ATEX 95 abrogates the directive 76/7/EC and becomes mandatory for all new equipment installed after 06/30/03. Former Ex products, already in stock, can still be installed if they are to replace used parts in already active installations. ates of enforcement ATEX 37 : Installations The ATEX 999/9/EC (ATEX 37) directive becomes mandatory for all new installations implemented after 06/30/03, in every country member of the EEC. For existing installations, three more years are given to fulfill the minimum requirements. If an old work place is upgraded, modified or extended, it must comply with the minimum requirements immediately. Pages 04058 5 SNC 60 004 C00

efinitions and terms Equipment and components used in potentially explosive atmospheres are divided into groups and categories. (Atex 94/9/EC, chapter, art, 3c) This classification is meant to define clearly the intended use of equipment, protective systems and devices, which is considered of prime importance for safe operation. Groups Categories Two distinct groups according to the industry type in which the equipments or components are to be used : Group I stands for Mine industries : Underground part of mines and surface installations of such mines, liable to be endangered by firedamp and / or combustible dust. Group II stands for Surface industries : All other places liable to be endangered by explosive atmospheres. ATEX defines categories of equipment, specified by their protection characteristics: For Mine industries : - Category M : very high level of safety - Category M : high level of safety For surfaces industries : - Category : very high level of safety - Category : high level of safety - Category 3: normal level of safety? Frequently asked question : If equipment is certified in category, is it certified in category? Equipment or components certified in category are also certified in category and category 3 since category is the highest level of safety. 6 Pages 04058 SNC 60 004 C00

Equipment in category : M (Mine industries) Is required to remain functional, even in the event of rare incidents relating to equipment, with an explosive atmosphere present. M (Mine industries) Is intended to be de-energized in the event of an explosive atmosphere. The means of protection relating to equipment in this category assure the requisite level of protection during normal operation and also in the case of more severe operating conditions, in particular those arising from rough handling and changing environmental conditions. (Surface industries) Must ensure the requisite level of protection, even in the event of rare incidents relating to equipment and is characterized by means of protection such that : - Either, in the event of failure of on means of protection, at least an independent second means provides the requisite level of protection. - Or the requisite level of protection is assured in the event of two faults occurring independently of each other. (Surface industries) Must ensure the requisite level of protection, even in the event of frequently occurring disturbances or equipment faults which normally have to be taken into account. 3 (Surface industries) Ensure the requisite level of protection during normal operation. Intended use : In underground parts of mines as well as those parts of surface installations of such mines endangered by firedamp and/or combustible dust. In underground parts of mines as well as those parts of surface installations of such mines endangered by firedamp and/or combustible dust. Zone 0 and Zone 0 : Areas in which explosive atmospheres caused by mixtures of air and gases, vapors or mists or by air/dust mixtures are present continuously, for long periods or frequently. Zone and Zone : Areas in which explosive atmospheres caused by mixtures of air and gases, vapors or mists or by air/dust mixtures are likely to occur. Zone and Zone : Areas in which explosive atmospheres caused by gases, vapors or mists or by air/dust mixtures are unlikely to occur or are likely to do so only infrequently and for a short period only. Atex 94/9/EC annex I 0 and 0 zones and zones and zones Explosive atmospheres classification example Pages 04058 7 SNC 60 004 C00

C. ATEX 94/9/EC conformity assessment procedures The ATEX certification process can be identified as two main parts : The EC type examination certificate confirms that the validity of the technical file established by ABB is in conformity with the Atex directive. Examination and test results of the product are been examined by a notified body. The inspection of quality assurance, conducted by a notified body : refers to the production or product quality assurance examination (depending upon the product level of certification). The notification has three years validity with yearly audit. As said in chapter B, ATEX directives objective is to increase the safety. Therefore, a quality assurance audit is now necessary to obtain the ATEX certification for any equipment or component. Complete conformity assessment procedure is detailed here below : Atex 94/9/EC chapter II, article 8 ABB certification conformity Production Quality Insurance inspection EC type examination certificate Notified bodies "Notified Bodies", are independant bodies which are appointed by the Member States. They have the relevant expertise and facilities to undertake the required procedures such as : " Examination", which involves an assessment made of the product against the Essential Health and Safety Requirements of the irective. Report of the manufacturer's Quality Assurance procedures to ensure that the "type" will continue to comply with the requirements. These "Notified Bodies" are given a number and are listed in the OJEC by the European Commission prior to their operation; the activities of the Notified Bodies are a matter for Member States, as they are appointed under their authority. While the Notified Body has various responsibilities under the irective, the manufacturer always remains responsible for the compliance of the equipment. 8 Pages 04058 SNC 60 004 C00

Production quality assessment notification Extract list of European Notified bodies and Certified bodies : Country Name Notified Bodies Certified Bodies (ATEX 94/4/EC) (IECEx) enmark EMKO X X France INERIS X LCIE* X X Germany PTB X X TÜV X X Italy CESI X Netherland KEMA X Norway NEMKO X X Sweden SP X X UK SIRA X X EC type examination certificate *LCIE : identification code 008 Subsidiary of Bureau Veritas group Pages 04058 9 SNC 60 004 C00

. Protection methods in potentially explosive atmosphere Protection methods are to be implemented so that equipment and electrical components can be used in a potentially explosive atmosphere. Safety methods : Protection types Principles Ex d : flame-proof Contains the explosion in an appropriate explosion proof housing. Ex e : increased Increases the reliability of the electrical components so that sparks or arcs cannot appear. Ex e voltage to apply is determined through severe limitations in the calculations of clearance and creepage distances. Ex i : intrinsic Reduces the energy to a very low energy level so that even sparks or arcs cannot ignite an explosion atmosphere. Ex m, Ex o, Ex p or Ex q Prevent contact between the electrical component and the explosive atmosphere Applications for Ex d, Ex e and Ex i protection types Flameproof protection Ex d Among the several protection methods, flameproof Ex d protection method is the most ancient and therefore represents the protection method the most implemented. Non-ATEX certified terminal blocks could be installed in a flameproof enclosure: the protection against explosion propagation is ensured by the enclosure not by the terminal block itself. However, as it requires a very specific design (the enclosure must be capable of withstanding a possible internal explosion), this solution appears over costly for terminal block installations. Increased protection Ex e Increased protection remains the best economical and technical choice for a safe use of terminal blocks in hazardous locations. ABB ATEX terminal block range, certified in increased safety, requires a high level of construction technology and do not require an explosion proof (Ex d) enclosure to operate safely in an explosive atmosphere. Please note that the enclosure containing the terminal blocks must offer a ust protection (IP6X minimum) and be Ex e certified itself in order to determine the maximum surface temperature in the housing (calculations consider the number of terminal blocks in the housing and current to be applied). Intrinsic protection Ex i Intrinsic protection is a common method of protection for instrumentation and control; it applies to an entire circuit. Blue is generally the colour code for the intrinsic circuit components. It is the only protection method that can be implemented in zone 0 or 0 (permanent presence of explosive atmosphere), as the allowed voltage and current are extremely low. Voltage and current calculations are necessary to ensure that the circuit composed of its several components will operate safely. ABB supplies intrinsic and increased protection certified terminal blocks, even if the intrinsic certification is not mandatory for components. The reasons are added benefits for our customers: it allows us to supply you with the ATEX appropriate group and category marked on the block as well as the Ex i necessary voltage calculations, which have been confirmed by a notified body. 0 Pages 04058 SNC 60 004 C00

Terminal blocks use Here below are the protection methods, for which the ATEX certification applies to terminal blocks. (*certification is not mandatory for components used in intrinsic protection only) CENELEC IEC Protection Symbol Concepts standards standards methods EN 50 04 IEC 60079-0 General rules EN 5009 IEC 60079-7 Increased safety e No sparks or arcs in normal use. Control of dangerous temperature levels : because they can generate arcs or sparks in normal use, switch or fuse terminal blocks cannot be classified in increased protection. EN 5000 IEC 60079- Intrinsic safety i Control of sparks, arcs or overheating through a very low energy level Pages 04058 SNC 60 004 C00

E. Product marking The directive ATEX 95 imposes a new marking for certified equipment and components. (Atex 94/9/EC, annex II). The terminal block marking must indicate the group and categories in which it can be used, associated with the protection method. The Notified body code must be indicated as well as the EC type examination certificate number for each certified block. not marked on ABB terminal blocks Temperature class : This characteristic applies to the maximum surface temperature authorised for ATEX certified equipment. The CE logo does no longer appear on ABB ATEX terminal blocks. Components cannot affix the CE marking. (ATEX 94 /9/EC, chapter, article 8). Components definition (Atex 94/9/EC, chapter, article ) : means any item essential to the safe functioning of equipment and protective systems but with no autonomous function. Suffix (for ust explosive atmosphere) : The marking does not appear on the ABB terminal blocks : equipment and components used in dust explosive atmospheres have to offer an IP6X degree of protection -total protection against dust penetration-. The certification is then irrelevant to terminal blocks -the terminal blocks design can never provide IP6X protection-. The terminal blocks dust protection is ensured by an enclosure, with a minimum IP6X dust protection, on which the marking is indicated. The temperature class is not indicated on components such as terminal blocks since this characteristic is specified for equipment only. The equipment manufacturer is responsible for the validation of the maximum surface temperature of its equipment, in regards to the devices composing it and in ambient temperature of -0 C +40 C. Please note that the temperature elevation for a terminal block will never exceed 45 K (per IEC 947-7-) at its rated current and nominal wire size. The operating temperature is -40 C +65 C with an acceptable -55 C in operating conditions. Gas class : This characteristic defines the various types of gas surrounding the equipment. The gas class is not indicated on terminal blocks since this characteristic is specified for equipment only and not for components. Pages 04058 SNC 60 004 C00

F. terminal blocks & accessories certification ATEX Terminal block range certification level EEx e IM and IIG and EEx i IM and IIG The ABB attestation of conformity guarantees the end user the conformity of the product in regards with the ATEX 95 directive and applicable standards. It is generic to the whole ATEX range. Accessory certification terminal block accessories are automatically ATEX certified. Please refer to the catalogue pages for the accessory list per terminal block. Some accessories like jumper bars or shielding connectors may declass the terminal block voltage. The detailed voltage is not indicated in the EC type examination certificate -the examination certificate, issued by the notified body, is meant to establish the ATEX terminal block conformity only-. Technical instruction sheets are at your disposal with all data for the appropriate voltage values as well as the operation and maintenance instructions. Please request them from your local sales. example of terminal blocks technical instruction sheet Pages 04058 3 SNC 60 004 C00

G. Terminal blocks UL Hazardous Locations certification UL Hazardous locations terminal block range certification level : Class I Zone Ex e II T6 (Partial range, indicated by * in the products pages) UL hazardous locations definitions and terms : Class I Zone : - Location in which ignitable concentrations of flammable gases or vapors are likely to exist under normal operating conditions ; or - Location in which ignitable concentrations of flammable gases or vapors may exist frequently because of repair or maintenance operations or because of leakage ; or - Location in which equipment is operated or processes are carried on, of such a nature that equipment breakdown or faulty operations could result in the release of ignitable concentrations of flammable gases or vapors and also cause simultaneous failure of electrical equipment in a mode to cause the electrical equipment to become a source of ignition ; or - That is adjacent to a Class, Zone 0 location from which ignitable concentrations of vapors could be communicated, unless communication is prevented by adequate positive pressure ventilation from a source of clean air and effective safeguards against ventilation failure are provided. Ex e : increased safety protection method II : stands for gas group (IIA, IIB, and IIC) T6 (Temperature classification) : T 85 C (85 F) Please refer to the appropriate UL file for conditions of use and ratings values to apply. References : http://europa.en.int/comm/enterprise/atex irective 94/9/EC Guidelines on the application of directive 94/9/EC Corrigendum of directive 94/9/EC irective 999/9/EC http://www.ul.com/hazloc http://www.offshore-technology.com 4 Pages 04058 SNC 60 004 C00

T070 04058 Summary SNC 60 004 C00 Screw clamp connection IN - 3... page 6 Standard and ground terminal blocks... page 6 ouble-deck terminal blocks... page 9 Three level sensor terminal blocks... page 0 Safety connection terminal blocks... page Thermocouple terminal blocks... page Power terminal blocks... page 3 Screw clamp terminal blocks IN... page 6 Spring clamp IN 3... page 7 Standard and ground terminal blocks... page 7 Spring clamp miniblocks IN and base mount... page 9 AO - Screw clamp IN 3... page 30 Standard and ground terminal blocks... page 30 ouble-deck terminal blocks... page 3 AO - AO connection IN 3... page 33 Standard and ground terminal blocks... page 33 ouble-deck terminal blocks... page 35 Screw clamp - AO connection miniblocks IN - 3 and base mount... page 36 AO - AO connection miniblocks IN - 3... page 38 Index... page 39 5

T07074 04055 SNC 60 004 C00 Standard and ground Terminal blocks MA,5/5...Ex Spacing 5 mm.00" M 4/6...Ex Spacing 6 mm.38" M 4/6.3A...Ex Spacing 6 mm.38" Screw clamp IN -3 accessory and mounted on IN 3 rail. The use of ground terminal blocks do not decrease the standard terminal block's voltage ratings Standard 5 mm block MA,5/5.P.Ex Standard 6 mm block M 4/6.P.Ex Standard 6 mm block One circuit and three clamps M 4/6.4A...Ex Spacing 5 mm.00" Spacing 6 mm.38" Spacing 6 mm.38" 4 * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z Standard blocks UL 94 V0 Terminal blocks for ground wires UL 94 V0 7 6 8 4 5 3 9 R 3 0 Blue body Green body Green/yellow body (without rail contact) Green/yellow body (with rail contact) Wire size Short circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 MA,5/5.Ex* MA,5/5.N.Ex* MA,5/5.PI.Ex MA,5/5.P.Ex* End section grey FEM6 V0 blue FEM6 V0 yellow FEM6 V0 orange FEM6 green FEM6 beige V0 FEM6 V0 Circuit separator grey SCMA5 3 Separator end section (block) grey SCF6 4 Separator end section (rail) grey SCFM6 5 Test socket IA. mm AL () IA. 3 mm IA. 4 mm 6 Test device CB 7 Test plug IA. mm 8 Preassembled poles BJMI5 () jumper bar IP 0 touchproof 3 poles BJMI5 () 4 poles BJMI5 () not IP0 5 poles BJMI5 () see section : accessories 0 poles BJMI5 () EL6 BJS5 () EV5 BJE 9 Connector plate 0 Jumper bar not preassembled 0 poles Post + screw + washer Preassembled jumper bar without screw IP0 Comb-type jumper bar 0 poles Isolating cover 3 Shielding connector th. 0.5 th. 0.8 4 Protection label 4 blocks Screw for protection label R See markers section SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 Other accessories see section accessories Standard 6 mm block Terminal block for ground wire. Terminal block for ground wire. One circuit and four clamps IEC UL CSA 0. - 4 0. -.5 - AWG - AWG.5 mm AWG AWG 300 A / s 0 mm /.39" 0.4-0.6 Nm / 3.5-5.3 Ib-in EExe : 750 V EExi : 90 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 005U PC5 (3) EIP CBM5 CBM8 th.,8 th.,8 th.,8 th.,8 th.,8 th.,5 SNA 46 04 R300 SNA 46 05 R400 SNA 46 40 R600 SNA 46 06 R500 SNA 46 59 R500 SNA 99 30 R0700 SNA 99 305 R000 SNA 03 6 R600 SNA 03 5 R500 SNA 98 368 R700 SNA 6 78 R500 SNA 8 707 R0300 SNA 4 85 R0500 SNA 63 046 R400 M 4/6.Ex* M 4/6.N.Ex* M 4/6.Ex M 4/6.PI.Ex M 4/6.P.Ex IEC UL CSA 0. - 4-0 AWG -0AWG 0. - 4 4- AWG (M 4/6.P.Ex) 4 mm 0 AWG 0 AWG 480 A / s 9.5 mm /.37" 0.5-0.8 Nm / 4.4-7. Ib-in EExe : 750 V EExi : 375 V EEx : 3 A I M / M II G / G LCIE 0 ATEX 004U RC 55 - RC50 RC 65 - RC60 RC 65 - RC60 () A circuit separator SC is required with the use of these accessories. () Use of these accessories requires the cut-out of the block body (precut). (3) For other configurations of poles,.(4) For M 4/6.3A...Ex. (5) For M 4/6.4A...Ex. 6 FEM6 V0 FEM6 V0 FEM6 V0 FEM6 FEM6 FEM6 V0 SCM6 SCF6 SCFM6 AL () AL3 () th.,8 th.,8 th.,8 th.,8 th.,8 th.,5 SNA 05 08 R00 CJ SNA 007 865 R600 SNA 76 78 R600 BJMI6 () SNA 76 79 R700 BJMI6 () SNA 76 80 R0500 BJMI6 () SNA 76 8 R00 BJMI6 () SNA 76 8 R300 BJMI6 () SNA 73 67 R00 EL6 SNA 77 65 R0600 BJS6 () SNA 68 69 R600 EV6 BJE SNA 3 544 R00 SNA 3 550 R400 SNA 78 745 R400 SNA 78 746 R500 These accessories cannot be mounted on MA,5/5.P.Ex block PC6 (3) EIP CBM5 CBM8 EP6 VSP6 SNA 46 00 R700 SNA 46 00 R000 SNA 46 45 R0700 SNA 46 37 R700 SNA 46 03 R400 These accessories cannot be mounted on M 4/6.P.Ex block SNA 46 59 R500 SNA 99 30 R0700 SNA 99 305 R000 SNA 03 6 R600 SNA 03 5 R500 SNA 98 368 R700 SNA 3 003 R000 SNA 8 707 R0300 SNA 4 85 R0500 SNA 63 043 R00 SNA 63 6 R0000 M 4/6.3A.Ex M 4/6.3A.N.Ex M 4/6.4A.Ex M 4/6.4A.N.Ex IEC UL CSA 0. - 4 0. - 4-0AWG -0AWG 4 mm 0 AWG AWG 9.5 mm /.37" 0.5-0.8 Nm / 4.4-7. Ib-in EExe : 40 V EExi : 90 V EEx : 3 A I M / M II G / G LCIE 0 ATEX 008U FEM3A V0 (4) FEM3A (4) FEM4A V0 (5) FEM4A (5) SCM6 AL () AL3 () SNA 73 059 R0300 CJ SNA 007 865 R600 SNA 76 663 R0000 BJMI6 () SNA 76 664 R000 BJMI6 () SNA 76 665 R000 BJMI6 () SNA 76 666 R0300 BJMI6 () SNA 76 667 R0400 BJMI6 () SNA 73 67 R00 EL6 SNA 74 784 R000 BJS6 () SNA 68 604 R600 EV6 BJE SNA 3 548 R600 SNA 3 550 R400 SNA 78 745 R400 SNA 78 746 R500 SNA 63 47 R700 SNA 63 433 R500 PC6 (3) EIP th.,8 th.,8 th.,8 th.,8 SNA 46 00 R300 SNA 46 0 R000 SNA 46 0 R00 SNA 46 03 R00 SNA 46 6 R0700 SNA 6 576 R700 SNA 46 6 R0000 SNA 6 69 R400 SNA 3 003 R000 SNA 63 043 R00 SNA 63 6 R0000 SNA 73 059 R0300 SNA 007 865 R600 SNA 76 663 R0000 SNA 76 664 R000 SNA 76 665 R000 SNA 76 666 R0300 SNA 76 667 R0400 SNA 73 67 R00 SNA 74 784 R000 SNA 68 604 R600 voir accessoires SNA 3 548 R600 SNA 3 550 R400

T07075 04055 SNC 60 004 C00 Standard and ground Terminal blocks M 6/8...Ex Spacing 8 mm.35" M 0/0...Ex Spacing 0 mm.394" M 6/...Ex Spacing mm.473" Screw clamp IN -3 accessory and mounted on IN 3 rail. The use of ground terminal blocks do not decrease the standard terminal block's voltage ratings. Standard 8 mm block M 6/8.P.Ex Standard 0 mm block M 0/0.P.Ex Standard mm block with partition M 6/.P.Ex Spacing 8 mm.35" Spacing 0 mm.394" Spacing mm.473" * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 Terminal block for ground wire. M 6/8.Ex* M 6/8.N.Ex* SNA 46 003 R00 SNA 46 004 R00 Terminal block for ground wire. (M 0/0.P.Ex closed terminal block) M 0/0.Ex* M 0/0.N.Ex* SNA 46 005 R300 SNA 46 006 R400 Terminal block for ground wire. (M 6/.P.Ex closed terminal block) M 6/.Ex* M 6/.N.Ex* SNA 46 07 R000 SNA 46 08 R00 Terminal blocks for ground wires UL 94 V0 4 7 6 8 4 5 3 9 R 3 0 Green/yellow body (without rail contact) Green/yellow body (with rail contact) Wire size Short circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 M 6/8.PI.Ex M 6/8.P.Ex End section grey FEM6 V0 blue FEM6 V0 yellow FEM6 V0 orange FEM6 green FEM6 beige V0 FEM6 V0 Circuit separator 3 Separator end section (block) 4 Separator end section (rail) 5 Test socket 6 Test device grey grey grey IA. mm IA. 3 mm IA. 4 mm SCM6 SCF6 SCFM6 AL () AL3 () AL4 () CO 7 Test plug IA. mm 8 Preassembled poles BJMI8 () jumper bar IP 0 touchproof 3 poles BJMI8 () 4 poles BJMI8 () not IP0 5 poles BJMI8 () see section : accessories 0 poles BJMI8 () 9 Connector plate EL6 0 Jumper bar not preassembled 0 poles BJS8 () Post + screw + washer EV6 Preassembled jumper bar BJE without screw IP0 Comb-type jumper bar 0 poles PC8 (3) Isolating cover 3 Shielding connector th. 0.5 th. 0.8 4 Protection label 3 blocks EP6 4 blocks EP8 Screw for protection label VSP6 R See markers section IEC UL CSA 0.5-0 0.5-6 -8 AWG 4-8 AWG 6 mm 8 AWG 8 AWG 70 A/ s mm /.47" 0.8- Nm / 7.-8.9 Ib-in EExe : 40 V EExi : 90 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 004U th.,8 th.,8 th.,8 th.,8 th.,8 th.,5 These accessories cannot be mounted on M 6/8.P.Ex block RC 65 - RC60 - RC80 SNA 46 38 R0000 SNA 46 0 R300 SNA 46 59 R500 SNA 99 30 R0700 SNA 99 305 R000 SNA 03 6 R600 SNA 03 5 R500 SNA 98 368 R700 SNA 3 003 R000 SNA 8 707 R0300 SNA 4 85 R0500 SNA 63 043 R00 SNA 63 6 R0000 SNA 63 6 R000 SNA 73 060 R0000 SNA 007 865 R600 SNA 76 669 R600 SNA 76 670 R300 SNA 76 67 R0000 SNA 76 67 R000 SNA 76 673 R000 SNA 73 67 R00 SNA 74 789 R0500 SNA 68 604 R600 M 0/0.PI.Ex M 0/0.P.Ex IEC UL CSA 0.5-6 0.5-0 0-6 AWG 8-6 AWG 0 mm 6 AWG 6 AWG 00 A/ s mm /.47".-.4 Nm / 0.6-.3 Ib-in EExe : 40 V EExi : 90 V EEx : 57 A I M / M II G / G LCIE 0 ATEX 004U FEM6 V0 FEM6 V0 FEM6 V0 FEM6 FEM6 FEM6 V0 SCM6 SCF6 SCFM6 AL () AL3 () AL4 () BJMI0 () BJMI0 () BJMI0 () BJMI0 () BJMI0 () BJS0() EV6 BJE SNA 63 33 R400 SNA 63 47 R700 SNA 63 48 R000 SNA 63 433 R500 PC0 EP8 EP0 VSP6 th.,8 th.,8 th.,8 th.,8 th.,8 th.,5 These accessories cannot be mounted on M 0/0.P.Ex block RC 65 - RC60 - RC80 SNA 46 39 R000 SNA 46 0 R00 SNA 46 59 R500 SNA 99 30 R0700 SNA 99 305 R000 SNA 03 6 R600 SNA 03 5 R500 SNA 98 368 R700 SNA 3 003 R000 SNA 8 707 R0300 SNA 4 85 R0500 SNA 63 043 R00 SNA 63 6 R0000 SNA 63 6 R000 SNA 007 865 R600 SNA 76 675 R0400 SNA 76 676 R0500 SNA 76 677 R0600 SNA 76 678 R700 SNA 76 679 R000 M 6/.P.Ex SNA 46 043 R000 IEC UL CSA 0.5-5 0.5-6 8-6 AWG 8-4 AWG 6 mm 4 AWG 4 AWG 90 A/ s 4 mm /.55".-.4 Nm / 0.6-.3 Ib-in EExe : 550 V EExi : 375 V EEx : 76 A I M / M II G / G LCIE 0 ATEX 004U FEM V0 th.,8 FEM th.,8 FEM th.,8 FEM V0 th.,8 SCF SCFM6 AL AL3 AL4 BJMI () BJMI () BJMI () BJMI () BJMI () SNA 77 654 R0000 BJS () SNA 68 604 R600 EV SNA 63 35 R600 SNA 63 48 R000 SNA 63 49 R00 SNA 63 433 R500 EP0 EP VSP RC 65 - RC60- RC80 SNA 46 70 R400 SNA 8 68 R0300 SNA 03 065 R400 SNA 98 68 R000 SNA 3 0 R000 SNA 4 85 R0500 SNA 63 043 R00 SNA 63 6 R0000 SNA 63 6 R000 SNA 007 865 R600 SNA 79 66 R0600 SNA 79 68 R000 SNA 79 69 R00 SNA 79 630 R600 SNA 79 63 R0300 SNA 77 653 R0700 SNA 68 664 R00 SNA 63 49 R00 SNA 63 430 R600 SNA 63 43 R400 These accessories cannot be mounted on M 6/.P.Ex block Other accessories see section accessories () Use of these accessories requires the cut-out of the block body (precut). 7

T07076 04055 SNC 60 004 C00 Standard and ground Terminal blocks M 35/6...Ex Spacing 6 mm.630" M 70/...Ex Spacing mm.866" M 95/6...Ex Spacing 6 mm.0" Screw clamp IN -3 accessory and mounted on IN 3 rail. The use of ground terminal blocks do not decrease the standard terminal block's voltage ratings. Standard 6 mm block with partition M 35/6.P.Ex Standard mm block with partition M 70/.P.Ex Standard 6 mm block with partition M 95/6.P.Ex Spacing 6 mm.630" Spacing mm.866" Spacing 6 mm.0" * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. mm BAH V End stop th. mm BAEH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z Standard blocks UL 94 V0 Blue body SNA 6 900 R700 SNA 6 934 R0400 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 Terminal block for ground wire. (M 35/6.P.Ex closed terminal block) M 35/6.Ex* M 35/6.N.Ex* SNA 46 09 R00 SNA 46 030 R700 Terminal block for ground wire. (M 70/.P.Ex closed terminal block) M 70/.Ex* M 70/.N.Ex* SNA 46 05 R600 SNA 46 06 R700 Terminal block for ground wire. (M 95/6.P.Ex closed terminal block) M 95/6.Ex M 95/6.N.Ex SNA 46 00 R500 SNA 46 04 R500 Terminal blocks for ground wires UL 94 V0 3 5 6 4 Green/yellow body (with rail contact) Wire size Short circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey blue yellow beige V0 Separator end section (block) grey 3 Test socket IA. 4 mm 4 Test plug IA. 4 mm 5 Preassembled poles jumper bar IP 0 touchproof 3 poles 4 poles not IP0 5 poles see section : accessories 0 poles 6 Jumper bar not preassembled 0 poles Post + screw + washer 7 Protection label 3 blocks 4 blocks Screw for protection label M 35/6.P.Ex SNA 46 044 R00 IEC UL CSA - 50 0-0 AWG 0-0 AWG - 35 0- AWG 0- AWG 35 mm 0 AWG 0 AWG 400 A/s 7 mm /.67".8-3 Nm / 4.9-6.7 Ib-in EExe : 750 V EExi : 375 V EEx : 5 A I M / M II G / G LCIE 0 ATEX 004U FEM6 V0 FEM6 V0 FEM6 FEM6 V0 AL4 FC4 BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJS6 () 0 poles EV6 EP EP6 VSP6 SNA 46 7 R000 SNA 99 304 R000 SNA 03 06 R000 SNA 98 33 R000 SNA 68 37 R0500 SNA 67 860 R000 SNA 79 63 R000 SNA 79 64 R000 SNA 79 65 R0300 SNA 79 66 R0400 SNA 79 67 R0500 SNA 68 38 R600 SNA 79 67 R0700 SNA 63 430 R600 SNA 63 43 R300 SNA 73 47 R000 M 70/.P.Ex SNA 46 073 R600 IEC UL CSA 6-95 6-70 4-00 AWG 4-00 AWG 70 mm 00 AWG 00 AWG 8400 A/s 5 mm /.98" 6-7 Nm / 53.4-6.3 Ib-in EExe : 660 V EExi : 375 V EEx : 9 A I M / M II G / G LCIE 0 ATEX 007U / 003U FEM V0 FEMV0 SCF BJS() BJS() BJS() BJS() VSJ5 RJ5 EP3 EP4 VSP poles 3 poles 5 poles 0 poles screw washer SNA 46 69 R700 SNA 93 065 R600 SNA 3 85 R600 SNA 73 36 R00 SNA 73 37 R00 SNA 73 38 R0300 SNA 73 39 R0400 SNA 73 30 R000 SNA 73 33 R000 SNA 73 37 R400 SNA 73 38 R0500 SNA 73 33 R000 M 95/6.P.Ex SNA 46 068 R000 IEC UL CSA 35-0 35-95 0000 AWG 000 AWG 95 mm² 0000 AWG 000 AWG 400 A/s 6 mm /.0" 8.5-9.5 Nm / 74-83 Ib-in EExe : 750 V EExi : 375 V EEx : 3 A I M / M II G / G LCIE 0 ATEX 00U / 003U BJS6 BJS6 BJS6 BJS6 VSJ5 RJ5 poles 3 poles 5 poles 0 poles screw washer SNA 77 508 R0700 SNA 77 509 R0000 SNA 77 50 R400 SNA 77 5 R00 SNA 73 30 R000 SNA 73 33 R000 7 R R See markers section Other accessories see section accessories These accessories cannot be mounted on M 35/6.P.Ex block These accessories cannot be mounted on M 70/.P.Ex block These accessories cannot be mounted on M 95/6.P.Ex block RC 65 - RC60 - RC80 RC 65 - RC60 - RC80 RC 65 - RC60- RC80 () A circuit separator SC is required with the use of these accessories. () Use of these accessories requires the cut-out of the block body (precut). 8

T07077 04055 SNC 60 004 C00 ouble-deck terminal blocks Screw clamp IN -3 MA,5/5....Ex Spacing 5 mm.00" M 4/6..Ex Spacing 6 mm.38" accessory and mounted on IN 3 rail. Standard 5 mm block MA,5/5...Ex Spacing 5 mm.00" Standard 6 mm block End stop th. mm BAH V End stop th. mm BAEH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z SNA 6 900 R700 SNA 6 934 R0400 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 M,5/5..Ex with partition Standard blocks UL 94 V0 Blue body MA,5/5..Ex MA,5/5..N.Ex SNA 46 07 R600 SNA 46 08 R700 M 4/6..Ex SNA 46 009 R0700 MA,5/5...Ex SNA 46 09 R000 Wire size 6 4 9 8 5 7 3 0 Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey blue Beige V0 Circuit separator grey Beige V0 3 Separator end section (block) grey 4 Test socket IA. mm IA. 3 mm 5 Test device 6 Test plug IA. mm 7 Preassembled poles jumper bar not IP 0 3 poles 4 poles 5 poles 0 poles 8 Preassembled poles jumper bar 3 poles with IP 0 touchproof 4 poles 5 poles 0 poles 9 Connector plate 0 Jumper bar not preassembled Post + screw + washer Comb-type jumper bar 0 poles Isolating cover Vertical inerconnection 3 Shielding connector th. 0.5 IEC UL CSA 0. - 4 0. -.5 - AWG 0- AWG.5 mm AWG AWG 9 mm /.35" 0.4-0.6 Nm / 3.5-5.3 Ib-in EExe : 380 V EExi : 90 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 006U FEM6 V0 FEM6 FEM6 V0 SCMA5 (3) AL () CV BJM5 () () BJM5 () () BJM5 () () BJM5 () () BJM5 () () BJMI5 () () BJMI5 () () BJMI5 () () BJMI5 () () BJMI5 () () EL6 BJS5 () () EV5 PC5 EIP ITV5 CBM5 th. th. th. th. 0 poles SNA 46 60 R00 SNA 8 499 R500 SNA 98 499 R400 SNA 6 70 R00 SNA 64 950 R0000 SNA 73 058 R000 SNA 007 865 R600 SNA 76 6 R00 SNA 76 7 R300 SNA 76 8 R0400 SNA 76 9 R0500 SNA 76 30 R000 SNA 76 736 R00 SNA 76 737 R00 SNA 76 738 R0300 SNA 76 739 R0400 SNA 76 740 R00 SNA 73 67 R00 SNA 77 65 R0500 SNA 76 60 R000 SNA 3 544 R00 SNA 3 550 R400 SNA 76 59 R300 SNA 73 530 R400 IEC UL CSA 0. - 4 0. - 4 - AWG 4- AWG 4 mm² AWG AWG 8.5 mm /.33" 0.5-0.8 Nm / 4.4-7. lb.in EExe : 380 V EExi : 90 V EEx : 3 A I M / M II G / G LCIE 0 ATEX 009U FEM6 V0 FEM6 FEM6 V0 SCM6 (3) SCM6 V0 (3) SCF6 AL () AL3 () CG BJM6 () () BJM6 () () BJM6 () () BJM6 () () BJM6 () () BJMI6 () () BJMI6 () () BJMI6 () () BJMI6 () () BJMI6 () () EL6 BJS6 () () EV6 PC6 ITV6 CBM5 th. th. th. th. th. th. 0 poles SNA 46 60 R00 SNA 8 499 R500 SNA 98 499 R400 SNA 3 48 R0500 SNA 93 48 R0600 SNA 8 495 R700 SNA 63 070 R0000 SNA 63 6 R0000 SNA 63 8 R0500 SNA 007 865 R600 SNA 73 55 R00 SNA 73 56 R00 SNA 73 57 R300 SNA 73 59 R500 SNA 73 50 R00 SNA 79 668 R000 SNA 79 669 R00 SNA 79 670 R600 SNA 79 67 R300 SNA 79 67 R400 SNA 73 67 R00 SNA 68 485 R700 SNA 68 400 R600 SNA 63 3 R00 SNA 68 96 R0400 SNA 73 530 R400 3 R R See markers section Other accessories see section accessories RC50 RC65 - RC60 () A circuit separator SC is required with the use of these accessories. () Use of these accessories requires the cut-out of the block body (precut). (3) Except M,5/5...Ex and M 4/6...Ex 9

T07078 0405 SNC 60 004 C00 Three level sensor terminal blocks Screw clamp IN 3,5/6.A...Ex Spacing 6 mm.38" accessory and mounted on IN 3 rail. Three level block for power without ground protection. Power supply block for sensors/actuators - Three-wires without Led. End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 6 900 R700 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard blocks UL 94 V0 Blue body,5/6.a.ex,5/6.a.n.ex SNA 46 098 R000 SNA 46 04 R300 Wire size Stranded wire Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey Preassembled poles jumper bar 3 poles without IP 0 touchproof - A 4 poles 5 poles 0 poles 0 poles 3 Connector plate A 4 IC jumper 4 A IEC UL CSA 0. -.5 0. -.5 0- AWG -4 AWG.5 mm AWG 4 AWG 6 mm /.4" 0.4-0.6 Nm / 3.5-5.3 Ib-in EExe : 60 V EExi : 30 V EEx : A I M / M II G / G LCIE 03 ATEX 004U FE3E SNA 6 77 R000 BJ6 SNA 78 04 R500 BJ6 SNA 78 05 R600 BJ6 SNA 78 06 R700 BJ6 SNA 78 07 R000 BJ6 SNA 78 03 R500 BJ6 SNA 78 033 R600 EL6 SNA 77 8 R700 A,5 SNA 4 05 R000 3 4 R R See markers section RC65 RC65 red - blank SNA 03 776 R000 blue - blank SNA 03 775 R0000 Other accessories see section accessories 0

T07080 04058 Safety connection terminal blocks SNC 60 004 C00 M 4/6.RS.Ex Spacing 6 mm.38" M 6/8.RS.Ex Spacing 8 mm.35" M 0/0.RS.Ex Spacing 0 mm.394" Screw clamp IN -3 accessory and mounted on IN 3 rail. center of rail Compression clamp terminal for bare wire or equipped with bent lug. - spring under each wire-clamp Compression clamp terminal for bare wire or equipped with bent lug. - spring under each wire-clamp Compression clamp terminal for bare wire or equipped with bent lug. - spring under each wire-clamp End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 Ground wire-clamp holds bent lugs, as above (not supplied) for connection of wires : 0.8 to.5 mm².0 to.5 mm².5 to 6.0 mm² (only for M 0/0.RS.Ex) Standard blocks UL 94 V0 M 4/6.RS.Ex M 6/8.RS.Ex SNA 46 R500 M 0/0.RS.Ex SNA 46 R600 Wire size Screw clamp Lugs Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 FEMR0 3 BJS8 + EV6 6 FEMR8 7 4 BJS0 + PL0 + VSJ 5 End section grey beige V0 Test socket IA. mm IA. 4 mm 3 Test plug 4 Jumper bar not assembled Screw + post + washer Central socket for isolated interconnection Screw for central socket 5 Assembled jumper bar not IP 0 6 Assembled jumper bar with IP 0 touchproof 7 Bridging plug IEC BS UL/CSA TS 50-8 In progress 0. - 4 0. - 4 - AWG 0.5 -.5 0.8 -.65 4 mm.65 mm AWG 3 mm /.5" 0.5-0.8 Nm / 4.4-7. Ib-in FEMR8 AL BJS6 () BJS6 () BJS6 () BJS6 () BJS6 () BJS6 () EV6 BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJMI6 () BJMI6 () BJMI6 () BJMI6 () BJMI6 () th.,8 poles 3 poles 4 poles 5 poles 0 poles 0 poles poles 3 poles 4 poles 5 poles 0 poles poles 3 poles 4 poles 5 poles 0 poles SNA 46 7 R000 FEMR8 FEMR8 V0 SNA 63 043 R00 SNA 007 865 R600 SNA 64 573 R00 SNA 64 574 R300 SNA 64 575 R400 SNA 64 736 R500 SNA 64 576 R500 SNA 74 784 R000 SNA 68 604 R600 SNA 68 56 R500 SNA 68 57 R600 SNA 68 58 R0700 SNA 68 59 R0000 SNA 68 973 R0700 SNA 76 663 R0000 SNA 76 664 R000 SNA 76 665 R000 SNA 76 666 R0300 SNA 76 667 R0400 IEC BS UL/CSA TS 50-8 0.5-0 0.5-6 0- AWG 0.8 -.5 6 mm.5 mm AWG 3 mm /.5" 0.8- Nm / 7.-8.9 Ib-in EExe : 550 V EExi : 375 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 00U AL4 FC4 BJS8 () BJS8 () BJS8 () BJS8 () BJS8 () BJS8 () BJS8 () EV6 BJM8 () BJM8 () BJM8 () BJM8 () BJM8 () BJMI8 () BJMI8 () BJMI8 () BJMI8 () BJMI8 () BP8.A4 th.,8 th.,8 poles 3 poles 4 poles 5 poles 0 poles 5 poles 0 poles SNA 46 7 R000 SNA 96 987 R0300 SNA 79 76 R600 SNA 67 860 R000 SNA 64 58 R300 SNA 64 58 R400 SNA 64 583 R500 SNA 64 737 R600 SNA 64 584 R600 SNA 74 788 R0400 SNA 74 789 R0500 SNA 68 604 R600 poles SNA 68 50 R0500 3 poles SNA 68 5 R00 4 poles SNA 68 5 R300 5 poles SNA 68 53 R400 0 poles SNA 68 974 R0000 poles SNA 76 669 R600 3 poles SNA 76 670 R300 4 poles SNA 76 67 R0000 5 poles SNA 76 67 R000 0 poles SNA 76 673 R000 SNA 73 888 R000 IEC BS UL/CSA TS 50-8 0.5-6 0.5-0 0-6 AWG 0.8-6 0 mm 6 mm 6 AWG 4 mm /.55".-.4 Nm / 0.6-.3 Ib-in EExe : 550 V EExi : 375 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 00U FEMR0 FEMR0 V0 AL4 FC4 BJS0 () BJS0 () BJS0 () BJS0 () BJS0 () BJS0 () PT0 VSJ th.,8 th.,8 SNA 68 37 R0500 SNA 67 860 R000 poles SNA 64 585 R700 3 poles SNA 64 586 R000 4 poles SNA 64 587 R00 5 poles SNA 68 73 R00 0 poles SNA 64 588 R00 0 poles SNA 77 654 R0000 poles 3 poles 4 poles 5 poles 0 poles poles 3 poles 4 poles 5 poles 0 poles SNA 46 73 R0300 SNA 94 434 R0600 SNA 63 8 R00 SNA 63 394 R600 R R See markers section RC60 RC80 RC60- RC80 Other accessories see section accessories () Use of these accessories requires the cut-out of the block body (precut).

T0708 0407 Thermocouple terminal blocks SNC 60 004 C00 Screw clamp IN -3 accessory and mounted on IN 3 rail. MTC 6.Ex Spacing 6 mm.38" 6 mm block for thermocouple wires. Thermocouple terminal blocks 's MTC 6.Ex thermocouple terminal block provides an interface for connecting thermocouple wire with virtually no loss of signal integrity. The interface design ensures positive wire continuity and allows selection and inventory of one terminal block for all thermocouple material. Figure : MTC 6.Ex with shield connector End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Rail 3 x 5 x,5 PR.Z Standard blocks UL 94 V0 SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 SNA 63 050 R0400 MTC 6.Ex SNA 46 7 R500 The thermocouple principle is based on the reaction of different metals to temperature. When thermocouple wires are terminated or connected, the "metal balance" must be maintained. The introduction of a foreign material (such as copper) results in loss of signal strength and integrity. When running extended or intermittent lengths of thermocouple wire, to a measurement instrument, two solutions are available :. When signals are carried over a long distance, a thermocouple transmitter is required. The thermocouple signal, in millivolts (mv), is converted to a milliampere (ma) signal (i.e. 4-0 ma) for ease of transmission.. When thermocouple wire is of insufficient length, termination and interconnection, using terminal blocks, will extend its length. Wire size With isolated ferrule Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey Shield connector 3 mm max. /." 0.4-0.6 Nm / 3.5-5.3 lb.in EExe : 550 V EExi : 90 V I M / M II G / G LCIE 0 ATEX 005U FEM6 V0 CBM5 CBM6 Conductors for thermocouple (IA. 0.9 -.5 mm) th..8 SNA 46 59 R500 th. 0.5 SNA 78 745 R400 th. 0.8 SNA 78 746 R500 Universal terminal block Other thermocouple terminal blocks are available with hardware (screws, clamps and connecting bar) which match the thermocouple material being used. This requires inventory of many different terminal block types. 's MTC 6.Ex terminal block adapts to all thermocouple material. This "neutral" method of connection limits the introduction of foreign materials to an insignificant level. The thermocouple wire insulation is stripped (3 mm maximum) and the bare wires are superimposed on one another. The thermocouple wires are in contact over their complete 3 mm length and tightened at two points by round tip screws (see figure ). The screws, made of plated brass, have only a mechanical function, that of holding the wires together with a point contact. Thus, the pressure points are not relevant in the connection environment. One thermocouple lead connects through one terminal block. The MTC 6 requires only 6 mm of space, allowing 50 terminals per foot of rail. R R See markers section Other accessories see section accessories RC65 - RC60 Thermocouple shield wire connector bar The MTC 6.Ex can be field of factory equipped with a shield connector bar (see figure ). This bar, made of treated brass, mounts in the lower part of the terminal block. It ensures the continuity of the thermocouple wire shield through the terminal block or to ground with no additional spacing.

T0708 04056 SNC 60 004 C00 Power terminal blocks IN 3 with bistable foot and base mounting 35/7.FF.Ex Spacing 7 mm.06" 70/3.FF.Ex Spacing 3 mm.6" 0/4.FF.Ex Spacing 4 mm.65" accessory and mounted on IN 3 rail. studs M0 studs M8 studs M0 End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 6 900 R700 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard block UL 94 V0 35/7.FF.Ex SNA 46 307 R0600 elivered with covers 70/3.FF.Ex SNA 46 308 R700 elivered with covers 0/4.FF.Ex SNA 46 309 R000 elivered with covers Wire size Lug 35/7.FF.Ex SNA 46 30 R000 Without cover IEC IEC UL/CSA (C4).5-35.5-50 AWG (C4).5-35.5-35 AWG 70/3.FF.Ex SNA 46 303 R000 Without cover IEC IEC UL/CSA (C6) 6-95 6-70 000 AWG (C6) 6-70 6-70 000 AWG 0/4.FF.Ex SNA 46 304 R0300 Without cover IEC IEC UL/CSA (C8) 6-50 6-0 300 MCM (C8) 6-0 300 MCM Recommended wrench Lug / Central bolt Recommended torque Nm / Ib.in Voltage EN 5009 Current EN 5009 Rotating protective cover IP0 Grey 35 mm² 35 mm² AWG H0 mm / 6 pans creux 6 mm 3 Nm / 6. Ib-in / 6 Nm / 5 Ib-in. 750 V 5 A I M - II G EEx e LCIE 03 ATEX 0034U CPUF35 SNA 90 06 R600 70 mm² 70 mm² 000 AWG H3 mm / 6 pans creux 6 mm 6 Nm / 5 Ib-in / 6 Nm / 5 Ib-in. 750 V 9 A I M - II G EEx e LCIE 03 ATEX 0034U CPUF70 SNA 90 07 R700 0 mm² 0 mm² 300 MCM H7 mm / 6 pans creux 6 mm 0 Nm / 87 Ib-in / 6 Nm / 5 Ib-in. 750 V 69 A I M - II G EEx e LCIE 03 ATEX 0034U CPUF0 SNA 90 08 R000 Jumper bar with CHc screws poles 3 poles 3 TAP for faston 6.35 x 0.8 mm and screw BJS7 BJS7 RF6 SNA 05 77 R300 SNA 05 773 R400 SNA 05 767 R600 BJS3 BJS3 RF8 SNA 05 774 R500 SNA 05 775 R600 SNA 05 768 R700 BJS4 BJS4 RF0 SNA 05 776 R700 SNA 05 777 R000 SNA 05 769 R000 3 R R See marking chapter Other accessories see section accessories RC80 (on cover) - RC80, RPC (on the middle) RC80 (on cover) - RC80, RPC (on the middle) RC80 (on cover) - RC80, RPC (on the middle) 3

T07083 04056 SNC 60 004 C00 Power terminal blocks IN 3 with bistable foot and base mounting 85/55.FF.Ex Spacing 55 mm.6" 300/55.FF.Ex Spacing 55 mm.6" accessory and mounted on IN 3 rail. studs M studs M6 End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 6 900 R700 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard block UL 94 V0 85/55.FF.Ex SNA 46 30 R0400 elivered with covers 300/55.FF.Ex SNA 46 3 R00 elivered with covers Wire size Lug 85/55.FF.Ex SNA 46 305 R0400 Without cover IEC IEC UL/CSA (C) 5-40 6-85 500 MCM (C) 6-85 500 MCM 300/55.FF.Ex SNA 46 306 R0500 Without cover IEC IEC UL/CSA 5-300 6-300 000 MCM 6-300 000 MCM /MCM Recommended wrench lug / central bolt Recommended torque Nm / Ib.in Voltage EN 5009 Current EN 5009 Rotating protective cover IP0 Grey 85 mm² 85 mm² 500 MCM H9 mm / 6 pans creux 6 mm 4 Nm / Ib-in / 6 Nm / 5 Ib-in. 750 V 353 A I M - II G EEx e LCIE 03 ATEX 0034U CPUF85 SNA 90 09 R00 300 mm² 300 mm² 000 MCM H4 mm / 6 pans creux 6 mm 5 Nm / 7 Ib-in / 6 Nm / 5 Ib-in. 750 V 50 A I M - II G EEx e LCIE 03 ATEX 0034U CPUF85 SNA 90 09 R00 Jumper bar with CHc screws poles 3 poles 3 TAP for faston 6.35 x 0.8 mm and screw BJS5 BJS5 RF SNA 05 778 R00 SNA 05 779 R00 SNA 05 770 R500 BJS5 BJS5 RF6 SNA 05 778 R00 SNA 05 779 R00 SNA 05 77 R00 3 R R See marking chapter RC80 (on cover) - RC80, RPC (on the middle) RC80 (on cover) - RC80, RPC (on the middle) Other accessories see section accessories 4

T07089 04056 SNC 60 004 C00 Power terminal blocks rilling position for base mounting and dimensions with covers Particular conditions for mounting Mounting with A B C F G G H 35/7... Screws 00,5 7,5 6,5 / 63,5 36,5 60 8,5 70/3... Screws 0 7,5 6,5 / 7,5 65 90,5 05,7 0/4... Screws 0 7,5 6,5 / 83,5 97 55,5 9,7 85/55... 4 Screws 35 3,5 6,5 8,5 03,5 8,5 95 5,5 300/55... 4 Screws 35 3,5 6,5 8,5 05 / 95 / imensions in mm. Marking RC 80 or RC 00, marking method 7 6 RPC type setting marker, marking method 0 or RC 80 marker, marking method 7 Locking foot operating with screwdriver IA. 4 Center opening (to be made after jumper bar has been removed) "monostable action". As soon as the screwdriver is removed, the locking foot comes back to closed position Side opening "bistable action". The locking foot remains in open or closed position. Locking Between blocks with stul slots, RC80 not separated or RC 00 in slot With M3 screw Jumper bar - move the marker holders up - cut out the partition - screw the jumper bar M3 nut on one side M3 nut + washer on the other side Mounting of the derivative system Unlocking Locking 5

T07084 04055 SNC 60 004 C00 Standard and ground Terminal blocks Screw clamp IN R 4/6....Ex Spacing 6 mm.38" accessory. The use of ground terminal blocks do not decrease the standard terminal block's voltage ratings. R 4/6.Ex : Standard block 6 mm R 4/6..Ex : Standard block 6 mm with partition. R 4/6.P.Ex End stop th. 6.5 mm BARL V0 Rail 5 x 5 x PR SNA 99 40 R00 SNA 64 600 R00 Terminal block for ground wire. Standard blocks UL 94 V0 Terminal blocks for ground wires UL 94 V0 Wire size 3 5 4 6 7 Blue body Blue body Green/yellow body (with rail contact) With isolated ferrule Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey blue yellow Circuit separator white 3 Test socket IA. mm 4 Test device 5 Test plug IA. mm 6 Assembled poles jumper bar not IP0 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles 7 Jumper bar not assembled Post + screw + washer 8 Pivoting jumper bar 9 Comb-type jumper bar 0 poles 0 Protection label 3 blocks Screw for protection label R 4/6.Ex R 4/6..Ex R 4/6.N.Ex R 4/6..N.Ex R 4/6.P.Ex SNA 46 0 R0400 IEC UL CSA 0. - 4 0. - 4 8- AWG 8- AWG 4 mm AWG AWG 9.5 mm max. /.37" 0.5-0.8 Nm / 4.4-7. lb.in EExe : 75 V EExi : 90 V 30 A I M / M II G / G LCIE 0 ATEX 007U / 004U FER6 V0 FER6 FER63 SCR6 AL BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJM6 () BJP6 PC6 EP6 VSP6 th. th. th. th. 0,3 SNA 46 99 R00 SNA 46 00 R700 SNA 46 76 R0600 SNA 46 77 R0700 SNA 46 93 R000 SNA 7 600 R0500 SNA 03 975 R00 SNA 73 06 R000 SNA 67 39 R0600 SNA 007 865 R600 3 A SNA 73 7 R600 3 A SNA 73 8 R0700 3 A SNA 73 9 R0000 3 A SNA 73 R00 3 A SNA 74 R600 3 A SNA 74 3 R700 3 A SNA 74 4 R000 3 A SNA 74 5 R00 3 A SNA 73 6 R700 SNA 73 3 R400 SNA 63 3 R00 SNA 73 06 R0400 SNA 73 07 R0500 8 9 0 R R See markers section RC65 Other accessories see section accessories () Use of these accessories requires the cut-out of the block body (precut). 6

T07085 0407 SNC 60 004 C00 Standard and ground Terminal blocks,5/5....l.ex Spacing 5 mm.00",5/5....3l.ex Spacing 5 mm.00",5/5....4l.ex Spacing 5 mm.00" Spring clamp IN 58 80 accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wire per spring. center of rail 9 Terminal block with springs 45,5 38,5/5.P.L.Ex Terminal block with 3 spring,5/5.p.3l.ex center of rail 40 Terminal block with 4 spring,5/5.p.4l.ex 45,5 38 Spacing 5 mm.00" Spacing 5 mm.00" Spacing 5 mm.00" End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block with springs for ground wire.,5/5.l.ex,5/5.n.l.ex SNA 46 053 R00 SNA 46 05 R00 Terminal block with 3 springs for ground wire,5/5.3l.ex,5/5.n.3l.ex SNA 46 055 R400 SNA 46 056 R500 Terminal block with 4 springs for ground wire,5/5.4l.ex,5/5.n.4l.ex SNA 46 049 R0600 SNA 46 050 R0300 Terminal blocks for ground wires UL 94 V0 3 4 Green/yellow body (with rail contact) Wire size With isolated ferrule Short circuit current (for ground blocks) A / s Wire stripping length Recommended screwdriver Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey orange Circuit separator orange 3 Test plug black 4 Jumper bar orange IP 0-4 A 5 Jumper bar orange between blocks, different spacing - spacing 5 and 6 mm IP 0-4 A - spacing 5 and 8 mm IP 0-4 A 6 Shielding connector,5/5.p.l.ex SNA 46 054 R300,5/5.P.3L.Ex IEC UL/CSA IEC 0. - 4 6- AWG 0. -.5 6- AWG 0.5 -.5.5 mm AWG 300 A / s 9.5 mm /.37" 3.5 mm /.4" EExe : 550 V EExi : 60 V EExe : 550 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 003U FE5.L FE5.L SC5.L BJL5. BJL5.3 BJL5.4 BJL5.5 BJL5.6 BJL5.7 BJL5.8 BJL5.9 BJL5.0 BJPL56 () BJPL58 () CB5.L th.,5 th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles th. 0,5 SNA 9 06 R400 SNA 9 06 R500 SNA 9 35 R0400 SNA 007 865 R600 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 SNA 9 50 R0600 SNA 9 60 R0000 SNA 9 077 R400 0. - 4 6- AWG 0. -.5 6- AWG 0.5 -.5.5 mm AWG 300 A / s FE5.3L FE5.3L SC5.3L BJL5. BJL5.3 BJL5.4 BJL5.5 BJL5.6 BJL5.7 BJL5.8 BJL5.9 BJL5.0 BJPL56 () BJPL58 () SNA 46 057 R600 UL/CSA 9.5 mm /.37" 3.5 mm /.4" EExi : 60 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 000U th.,5 th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles SNA 9 05 R00 SNA 9 05 R300 SNA 9 36 R0600 SNA 007 865 R600 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 SNA 9 50 R0600 SNA 9 60 R0000,5/5.P.4L.Ex SNA 46 05 R000 IEC UL/CSA 0. - 4 6- AWG 0. -.5 6- AWG 0.5 -.5.5 mm AWG 300 A / s 9.5 mm /.37" 3.5 mm /.4" EExe : 550 V EExi : 60 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 000U FE5.4L FE5.4L SC5.4L BJL5. BJL5.3 BJL5.4 BJL5.5 BJL5.6 BJL5.7 BJL5.8 BJL5.9 BJL5.0 BJPL56 () BJPL58 () th.,5 th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles SNA 9 04 R000 SNA 9 04 R00 SNA 9 37 R0000 SNA 007 865 R600 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 SNA 9 50 R0600 SNA 9 60 R0000 5 6 R R See markers section Other accessories see section accessories This accessory cannot be mounted on M.5/5.P.L.Ex block RC50, RPC (on top) - RC55 (on side) RC50, RPC (on top) - RC55 (on side) RC50, RPC (on top) - RC55 (on side) () Insert an end section between the connected blocks 7

T07086 0407 SNC 60 004 C00 Standard and ground Terminal blocks,5/5.....l.l.ex Spacing 5 mm.00" 4/6....L.Ex Spacing 6 mm.36" 6/8....L.Ex Spacing 8 mm.35" Spring clamp IN 3 accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wire per spring. End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 ouble circuit Terminal block with 4 springs with electrically separated circuits. Each circuit has its own test socket and can be jumpered independently. * Marking to make a difference between the,5/5....4l.ex and the,5/5.l.l.ex terminal blocks. Same dimensions as,5/5...4l.ex,5/5.l.l.ex,5/5.n.l.l.ex SNA 46 047 R400 SNA 46 048 R0500 Terminal block with springs 4/6.L.Ex 4/6.N.L.Ex 4/6.P.L.Ex Spacing 6 mm.36" Terminal block with springs for ground wire. SNA 46 5 R0500 SNA 46 058 R0700 Terminal block with springs 6/8.L.Ex 6/8.N.L.Ex 6/8.P.L.Ex Spacing 8 mm.35" Terminal block with springs for ground wire. SNA 46 059 R0000 SNA 46 060 R0500 Terminal blocks for ground wires UL 94 V0 4 3 Green/yellow body (with rail contact) Wire size With isolated ferrule Short circuit current (for ground blocks) A / s Wire stripping length Recommended screwdriver Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey orange Circuit separator orange 3 Test plug black 4 Jumper bar orange IP 0-4 A 5 Jumper bar orange between blocks, different spacing - spacing 5 and 6 mm IP 0-4 A - spacing 5 and 8 mm IP 0-4 A - spacing 6 and 8 mm IP 0-3 A IEC UL/CSA 0. - 4 6- AWG 0. -.5 6- AWG 0.5 -.5.5 mm AWG 9.5 mm /.37" 3.5 mm /.4" EExe : 0 V EExi : 60 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 000U FE5.4L FE5.4L SC5.4L BJL5. BJL5.3 BJL5.4 BJL5.5 BJL5.6 BJL5.7 BJL5.8 BJL5.9 BJL5.0 BJPL56 () BJPL58 () th.,5 th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles SNA 9 04 R000 SNA 9 04 R00 SNA 9 37 R0000 SNA 007 865 R600 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 SNA 9 50 R0600 SNA 9 60 R0000 4/6.P.L.Ex IEC SNA 46 53 R0700 UL/CSA 6/8.P.L.Ex IEC SNA 46 06 R00 UL/CSA 0. - 6 4-0 AWG 0.5-0 -8 AWG 0. - 4 4-0 AWG 0.5-6 -8 AWG 0.5-4 0.5-6 4 mm 0 AWG 6 mm 8 AWG 480 A / s 70 A / s mm /.43" 4 mm /.6".5 mm /.49" 5.5 mm /." EExe : 660 V EExi : 90 V EExe : 550 V EExi : 90 V EEx : 3 A EEx : 4 A I M / M II G / G I M / M II G / G LCIE 0 ATEX 005U LCIE 0 ATEX 005U FE5.L FE5.L SC5.L BJL6. BJL6.3 BJL6.4 BJL6.5 BJPL56 () BJPL68 () th.,5 th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles SNA 9 06 R400 SNA 9 06 R500 SNA 9 35 R0400 SNA 007 865 R600 SNA 9 8 R400 SNA 9 9 R500 SNA 9 94 R700 SNA 9 95 R000 SNA 9 50 R0600 SNA 9 70 R000 FE8.L FE8.L BJL8. BJL8.3 BJL8.4 BJL8.5 BJPL58 () BJPL68 () th.,5 th.,5 Ø poles 3 poles 4 poles 5 poles SNA 9 6 R500 SNA 9 6 R600 SNA 007 865 R600 SNA 9 R600 SNA 9 3 R700 SNA 9 44 R400 SNA 9 45 R500 SNA 9 60 R0000 SNA 9 70 R000 5 R R See markers section RC50, RPC (on top) - RC55 (on side) RC60, RPC (on top) - RC65 (on side) RC60, RC80, RPC (on top) - RC65, RCAL (on side) Other accessories see section accessories () Insert an end section between the connected blocks 8

T07090 0405 SNC 60 004 C00 Standard and ground miniblocks - Spring clamp IN - Base mount with flanges R,5/5.L.Ex Spacing 5 mm.00" B,5/5.L.Ex accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wire per spring. Miniblock with springs R,5/0.P.4L.Ex Spacing 0 mm.396" Miniblock with springs 33,5 30 center of rail 6,5 End stop th. 6.5 mm BARL V0 Rail 5 x 5 x PR SNA 99 40 R00 SNA 64 600 R00 Ground miniblock with 4 springs Standard blocks UL 94 V0 Blue body R,5/5.L.Ex SNA 46 07 R000 B,5/5.L.Ex B,5/5.N.L.Ex SNA 46 46 R0000 SNA 46 47 R000 Terminal blocks for ground wires UL 94 V0 3 Green/yellow body (with rail contact) Wire size With isolated ferrule Short-circuit current (for ground blocks) A / s Wire stripping length Recommended screwdriver Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey orange Kit end section grey (right + left) orange 3 Separator section grey orange 4 Jumper bar orange IP 0-4 A 5 Jumper bar orange IP 0-4 A R,5/0.P.4L.Ex SNA 46 63 R000 IEC UL/CSA IEC UL/CSA 0. - 4 6- AWG 0. - 4 6- AWG 0. -.5 6- AWG 0. -.5 6- AWG 0.5 -.5 0.5 -.5.5 mm AWG 300 A / s.5 mm AWG 9.5 mm /.37" 3.5 mm /.4" 9.5 mm /.37" 3.5 mm /.4" EExe : 75 V EExi : 60 V EExe : 75 V EExi : 60 V 4 A 4 A I M / M II G / G I M / M II G / G LCIE 0 ATEX 003U LCIE 0 ATEX 003U FE.L FE.L th..5 th..5 FE.L th. 4 FE.L th. 4 BJL5. () poles BJL5.3 () 3 poles BJL5.4 () 4 poles BJL5.5 () 5 poles BJL5.6 () 6 poles BJL5.7 () 7 poles BJL5.8 () 8 poles BJL5.9 () 9 poles BJL5.0 () 0 poles BJL0. () poles BJL0.3 () 3 poles BJL0.4 () 4 poles BJL0.5 () 5 poles SNA 9 30 R000 SNA 9 30 R0300 SNA 9 3 R300 SNA 9 3 R400 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 SNA 9 3 R600 SNA 9 33 R700 SNA 9 34 R000 SNA 9 35 R00 FEB.L FEB.L FE.L FE.L BJL5. () BJL5.3 () BJL5.4 () BJL5.5 () BJL5.6 () BJL5.7 () BJL5.8 () BJL5.9 () BJL5.0 () th. 4 th. 4 poles 3 poles 4 poles 5 poles 6 poles 7 poles 8 poles 9 poles 0 poles SNA 90 8 R000 SNA 90 8 R000 SNA 9 3 R300 SNA 9 3 R400 SNA 9 0 R300 SNA 9 03 R400 SNA 9 04 R500 SNA 9 05 R600 SNA 9 06 R700 SNA 9 07 R000 SNA 9 08 R000 SNA 9 09 R000 SNA 9 0 R600 4 5 R R See markers section Other accessories see section accessories RC55 () For...,5/5.L.Ex only. () For R,5/0.P.4L.Ex only. RC55 9

T0709 04058 SNC 60 004 C00 Terminal blocks Insulation displacement,5/5.ao.ex Spacing 5 mm.00" 4/6.AO.Ex Spacing 6 mm.38" 6/8.AO.Ex Spacing 8 mm.35" Screw clamp - AO IN 3 accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. ** UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard 5 mm block,5/5.p.ao.ex Spacing 5 mm.00",5/5.ao.ex,5/5.n.ao.ex Standard 6 mm block 4/6.P.AO.Ex Spacing 6 mm.38" 4/6.AO.Ex** 4/6.N.AO.Ex Standard 8 mm block - * Black marking 6/8.P.AO.Ex Spacing 8 mm.35" 50 Terminal block for ground wire with rail contact Terminal block for ground wire with rail contact Terminal block for ground wire with rail contact - * Black marking SNA 46 07 R400 SNA 46 07 R500 SNA 46 03 R500 SNA 46 033 R600 6/8.AO.Ex** 6/8.N.AO.Ex * center of rail 5 56 48,5 SNA 46 034 R700 SNA 46 035 R000 Terminal blocks for ground wires UL 94 V0 Green/yellow body (with rail contact),5/5.p.ao.ex SNA 46 074 R700 4/6.P.AO.Ex** SNA 46 03 R400 6/8.P.AO.Ex SNA 46 04 R700 IEC UL/CSA IEC UL/CSA IEC UL/CSA Wire size 0. - 4 - AWG 0. - 4-0 AWG 0. - 0-8 AWG Screw 0. -.5 - AWG 0. - 4-0 AWG 0. - 6-8 AWG 0. - 4-8 AWG 0.8 -.5 4-6 AWG -.5 6-4 AWG AO 0. - 4-8 AWG 0.34 -.5 4-6 AWG -.5 6-4 AWG mm /8 AWG.5 mm 0/6 AWG.5 mm 8-4 AWG Short-circuit current (for ground blocks) A / s 0 A / s 80 A / s 300 A / s Wire stripping length 9.5 mm /.37" 9.5 mm /.37" mm /.47" Recommended torque Nm / Ib.in 0.4-0.6 Nm / 3.5-5.3 lb.in 0.5-0.8 Nm / 4.4-7. lb.in 0.8- Nm / 7.-8.9 lb.in Voltage EN 5009 / EN 5000 EExe : 750 V EExi : 60 V EExe : 550 V EExi : 90 V EExe : 550 V EExi : 90 V Current EN 5009 / EN 5000 EEx : 3,5 A EEx : 7,5 A EEx : 4 A I M / M II G / G I M / M II G / G I M / M II G / G LCIE 0 ATEX 009U LCIE 0 ATEX 000U / 00U LCIE 0 ATEX 000U / 00U 5 3 0 7 3 9 6 6 4 4 5 7 8 8 End section grey yellow Circuit separator grey 3 Test socket IA. mm IA. 3 mm 4 Test device 5 Test plug 6 Assembled jumper bar (without IP0 protection) 7 Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled 9 Screwless jumper bar IP0 0 Jumper bar Screwless jumper bar to be inserted into AO jaw orange IP0 Pivoting jumper bar 3 Connector plate 4 Comb-type jumper bar Isolating cover 5 Shielding connector th. 0,5 th. 0,8 6 Protection label Screw for protection label 7 IC jumper 8 Manual tool 9 Semi-automatic tool 0 Interchangeable head kit FEA FEA SCA5 AL () CB BJM () BJMI () BJS () BJE BJB BJAO PC5 EIP CBM5 CBM8 OUMA OUPA OUTA 0 poles SNA 99 336 R000 SNA 99 339 R0300 SNA 99 55 R000 SNA 63 046 R400 SNA 05 08 R00 SNA 007 865 R600 SNA 3 544 R00 SNA 3 550 R400 SNA 78 745 R400 SNA 78 746 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 FEA FEA SCA AL () AL3 () CJ BJM () BJMI () BJS () BJE BJB BJAO BJP6 EL6 PC6 EIP CBM5 CBM8 EP6 VSP6 A,5 OUMA OUPA OUTA SNA 99 336 R000 SNA 99 339 R0300 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R0000 SNA 73 059 R0300 SNA 007 865 R600 SNA 74 43 R400 SNA 73 67 R00 0 poles SNA 3 548 R600 SNA 3 550 R400 SNA 78 745 R400 SNA 78 746 R500 4 blocks SNA 63 47 R700 SNA 63 433 R500 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 FEA FEA SCA AL () AL3 () CO BJM () BJMI () BJS () BJE BJB BJAO BJP8 EL6 PC8 EP6 EP8 VSP6 A,5 OUMA OUPA OUTA 3 blocks 4 blocks SNA 99 336 R000 SNA 99 339 R0300 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R0000 SNA 73 060 R0000 SNA 007 865 R600 SNA 74 448 R0700 SNA 73 67 R00 0 pôles SNA 63 33 R400 SNA 63 47 R700 SNA 63 48 R000 SNA 63 433 R500 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 0 9 R See markers section These accessories cannot be These accessories cannot be mounted on,5/5.p.ao.ex mounted on 4/6.P.AO.Ex block block RC55 - RC50 - RTM 7 RC65 - RC60 - RTM7 () A circuit separator SC... is required with these accessories. These accessories cannot be mounted on 6/8.P.AO.Ex block RCAL85 - RC80 - RTM7 30

T07093 04058 SNC 60 004 C00 Terminal blocks Insulation displacement Screw clamp - AO IN 3 6/8.AO3.Ex Spacing 8 mm.35" accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. Only wire per AO connection. Standard 8 mm block - * White marking 6/8.P.AO3.Ex Spacing 8 mm.35" End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block for ground wire with rail contact - * White marking 6/8.AO3.Ex 6/8.N.AO3.Ex SNA 46 078 R0300 SNA 46 079 R0400 Terminal blocks for ground wires UL 94 V0 5 6 3 3 0 7 4 4 9 5 7 6 8 Green/yellow body (with rail contact) Wire size Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey yellow Circuit separator grey 3 Test socket IA. mm IA. 3 mm IA. 4 mm 4 Test device 5 Test plug 6 Assembled jumper bar (without IP0 protection) 7 Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled 9 Screwless jumper bar IP0 0 Jumper bar Screwless jumper bar to be inserted into AO jaw orange IP0 Pivoting jumper bar 3 Connector plate 4 Comb-type jumper bar Isolating cover 5 Protection label Screw for protection label 6 IC jumper 7 Manual tool 8 Semi-automatic tool 9 Interchangeable head kit 6/8.P.AO3.Ex SNA 46 08 R700 IEC UL/CSA 0. - 0-8 AWG 0. - 6-8 AWG 4 AWG 4 AWG 4 mm AWG 480 A / s mm /.47" 0.8- Nm / 7.-8.9 lb.in EExe : 750 V EExi : 375 V EEx : 3 A I M / M II G / G LCIE 0 ATEX 009U FEA FEA SCA AL () AL3 () AL4 () CO FC4 BJM8 () BJMI8 () BJS () BJE8 BJB BJAO BJP8 EL6 PC8 EP6 EP8 VSP6 A,5 OUMA OUPA OUTA 0 poles 3 blocks 4 blocks SNA 99 336 R000 SNA 99 339 R0300 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R0000 SNA 63 40 R700 SNA 73 060 R0000 SNA 007 865 R600 SNA 67 860 R000 SNA 74 448 R0700 SNA 73 67 R00 SNA 63 33 R400 SNA 63 47 R700 SNA 63 48 R000 SNA 63 433 R500 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 9 8 R See markers section These accessories cannot be mounted on 6/8.P.AO3.Ex block RCAL85 - RC80 - RTM7 () A circuit separator SC... is required with these accessories. 3

T07094 0408 SNC 60 004 C00 ouble deck terminal blocks Insulation displacement Screw clamp - AO IN 3 4/6..AO.Ex Spacing 6 mm.38" accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 6 900 R700 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block 6 mm, double deck opened. Standard blocks UL 94 V0 Blue body 4/6..AO.Ex 4/6..N.AO.Ex SNA 46 045 R00 SNA 46 046 R300 Wire size Screw AO Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 6 3 7 8 5 4 9 0 9 0 6 8 7 5 3 4 End stop End section grey 3 Circuit separator grey 4 Test socket IA. mm IA. 3 mm 5 Test device 6 Test plug 7 Screwless jumper bar IP0 8 Pivoting jumper bar 9 Jumper bar for alternated jumping 0 Connector plate Comb type jumper bar Insulating tip Vertical jumper bar 3 Shielding connector 4 Protection label Screw for protection label 5 IC jumper 6 Manual tool 7 Semi-automatic tool 8 Interchangeable head kit IEC UL/CSA 0. - 4-0 AWG 0. - 4-0 AWG 0.8 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 0/6 AWG 9.5 mm /.37" 0.5-0.8 Nm / 4.4-7. lb.in EExe : 550 V EExi : 375 V EEx : 7.5 A I M / M II G / G LCIE 0 ATEX 00U FEA SCA AL () AL3 () CJ BJM6... BJMI6... BJS6 EV6 BJE6... BJB BJAO6... BJP6 () BJA6 () EL6 PC6 EIP ITVE CBS EP6 VSP6 A,5 OUMA OUPA OUTA th. 5 SNA 99 47 R00 SNA 96 896 R0000 IA SNA 63 043 R00 IA 3 SNA 63 6 R0000 SNA 73 059 R0300 IA SNA 007 865 R600 0 poles SNA 74 784 R000 SNA 68 604 R600 SNA 99 466 R300 0 poles 0 poles 4 blocks SNA 74 43 R400 SNA 6 54 R00 SNA 73 67 R00 SNA 3 548 R600 SNA 3 550 R400 SNA 79 694 R0300 SNA 78 408 R400 SNA 63 47 R700 SNA 63 433 R500 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 R R See markers section RC65 - RC60 - RTM7 () A circuit separator SC... is required with these accessories. 3

T07095 04055 SNC 60 004 C00 Terminal blocks Insulation displacement AO - AO IN 3 /5.AO.Ex Spacing 5 mm.00",5/6.ao.ex Spacing 6 mm.38" accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. Standard 5 mm block /5.P.AO.Ex Spacing 5 mm.00" Standard 6 mm block,5/6.p.ao.ex Spacing 6 mm.38" * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block for ground wire with rail contact /5.AO.Ex /5.N.AO.Ex SNA 46 069 R000 SNA 46 070 R0700 Terminal block for ground wire with rail contact,5/6.ao.ex*,5/6.n.ao.ex SNA 46 036 R00 SNA 46 037 R00 Terminal blocks for ground wires UL 94 V0 4 6 8 3 0 9 5 7 Green/yellow body (with rail contact) Wire size Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey yellow Circuit separator grey 3 Test socket IA. mm IA. 3 mm 4 Test plug 5 Assembled jumper bar (without IP0 protection) 6 Assembled jumper bar (with IP0 protection) 7 Jumper bar not assembled Post + screw + washer 8 Screwless jumper bar IP0 9 Jumper bar 0 Screwless jumper bar to be inserted into AO jaw orange IP0 Pivoting jumper bar Connector plate 3 Shielding connector th. 0,5 th. 0,8 4 Protection label /5.P.AO.Ex IEC FEMA3 FEMA3 SCA5 AL () BJM5 () BJMI5 () BJS5 () EV5 BJE5... BJB BJAO5... CBM5 CBM8 SNA 46 075 R000 UL/CSA 0. - 4-8 AWG 0. - 4-8 AWG mm 8 AWG 0 A / s,5/6.p.ao.ex* IEC FEMA3 FEMA3 SCA AL () AL3 () FC4 BJM6 () BJMI6 () BJS6 () EV6 BJE6... BJB BJAO6... BJP6 EL6 CBM5 CBM8 EP6 SNA 46 040 R000 UL/CSA 0.34 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 6 AWG 80 A / s EExe : 750 V EExi : 60 V EExe : 550 V EExi : 90 V EEx : 3,5 A EEx : 7,5 A I M / M II G / G I M / M II G / G LCIE 0 ATEX 009U LCIE 0 ATEX 00U SNA 99 34 R0500 SNA 99 343 R0700 SNA 99 55 R000 SNA 63 046 R400 SNA 007 865 R600 SNA 78 745 R400 SNA 78 746 R500 SNA 99 34 R0500 SNA 99 343 R0700 SNA 99 55 R000 SNA 63 046 R400 SNA 63 6 R0000 SNA 007 865 R600 SNA 67 860 R000 SNA 74 43 R400 SNA 73 67 R00 SNA 78 745 R400 SNA 78 746 R500 SNA 63 47 R700 4 3 Screw for protection label 5 Manual tool 6 Semi-automatic tool 7 Interchangeable head kit OUMA OUPA OUTA SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 VSP6 OUMA OUPA OUTA SNA 63 433 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 5 6 7 R See markers section RC55 - RC50 - RTM 7 RC65 - RC60 - RTM7 () A circuit separator SC... is required with these accessories. 33

T07096 04058 SNC 60 004 C00 Terminal blocks Insulation displacement AO - AO IN 3,5/8.AO.Ex Spacing 8 mm.35" 4/8.AO.Ex Spacing 8 mm.35" accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. Standard 8 mm block - * Black marking,5/8.p.ao.ex Spacing 8 mm.35" Standard 8 mm block - * White marking 4/8.P.AO.Ex Spacing 8 mm.35" ** UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 End stop th. 9 mm BAL V0 End stop th. 9, mm BAM V End stop th. 9, mm BAM V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 Standard blocks UL 94 V0 Blue body SNA 399 903 R000 SNA 03 00 R600 SNA 99 306 R0300 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block for ground wire with rail contact - * Black marking Terminal block for ground wire with rail contact - * White marking,5/8.ao.ex**,5/8.n.ao.ex SNA 46 038 R300 SNA 46 039 R400 4/8.AO.Ex** 4/8.N.AO.Ex SNA 46 076 R00 SNA 46 077 R00 Terminal blocks for ground wires UL 94 V0 8 3 4 5 6 0 7 9 Green/yellow body (with rail contact) Wire size Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End section grey Circuit separator grey 3 Test socket IA. mm IA. 3 mm IA. 4 mm 4 Test plug 5 Assembled jumper bar (without IP0 protection) 6 Assembled jumper bar (with IP0 protection) 7 Jumper bar not assembled Post + screw + washer 8 Screwless jumper bar IP0 9 Jumper bar 0 Pivoting jumper bar Connector plate Protection label Screw for protection label 3 Manual tool 4 Semi-automatic tool 5 Interchangeable head kit,5/8.p.ao.ex** IEC BJMI8 () BJS8 () EV6 BJE8... BJB BJP8 EL6 EP6 EP8 VSP6 OUMA OUPA OUTA SNA 46 04 R600 UL/CSA -.5 6-4 AWG -.5 6-4 AWG.5 mm 6 AWG 300 A / s 4/8.P.AO.Ex IEC SNA 46 080 R00 UL/CSA.5-4 4- AWG 4 AWG 4 mm AWG 480 A / s EExe : 40 V EExi : 90 V EExe : 40 V EExi : 90 V EEx : 4 A EEx : 3 A I M / M II G / G I M / M II G / G LCIE 0 ATEX 00U LCIE 0 ATEX 009U FEMA3 SCA AL () AL3 () AL4 () FC4 BJM8 () SNA 99 34 R0500 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R000 SNA 63 40 R700 SNA 007 865 R600 SNA 67 860 R000 FEMA3 SCA AL () AL3 () AL4 () FC4 BJM8 () SNA 99 34 R0500 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R000 SNA 63 40 R700 SNA 007 865 R600 SNA 67 860 R000 SNA 99 466 R300 SNA 74 448 R0700 SNA 73 67 R00 SNA 63 47 R700 SNA 63 48 R000 SNA 63 433 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 BJMI8 () BJS8 () EV6 BJE8... BJB BJP8 EL6 EP6 EP8 VSP6 OUMA OUPA OUTA SNA 99 466 R300 SNA 74 448 R0700 SNA 73 67 R00 SNA 63 47 R700 SNA 63 48 R000 SNA 63 433 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 4 3 5 R R See markers section RCAL85 - RC60 - RTM7 RCAL85 - RC60 - RTM7 () A circuit separator SC... is required with these accessories. 34

T07097 0408 SNC 60 004 C00 ouble deck terminal blocks Insulation displacement AO - AO IN 3,5/6..AO.Ex Spacing 6 mm.38" accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 6 900 R700 SNA 94 836 R000 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Terminal block 6 mm, double deck opened. Standard blocks UL 94 V0 Blue body,5/6..ao.ex,5/6..n.ao.ex SNA 46 06 R300 SNA 46 063 R400 Wire size Screw AO Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 3 7 5 4 6 9 0 3 8 4 End section grey Circuit separator grey 3 Test socket IA. mm IA. 3 mm 4 Test plug IA. mm 5 Assembled jumper bar without IP0 6 Assembled jumper bar with IP0 7 Jumper bar not assembled Post + screw + washer 8 Screwless jumper bar IP0 9 Jumper bar 0 Svrewless jumper bar to be inserted into AO jaw orange IP0 Pivoting jumper bar Jumper bar for alternated jumping 3 Connector plate 4 Vertical jumper bar 5 Shielding connector 6 Protection label Screw for protection label 7 Manual tool 8 Semi-automatic tool 9 Interchangeable head kit IEC UL/CSA 0.8 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 6 AWG EExe : 550 V EExi : 375 V EEx : 7.5 A I M / M II G / G LCIE 0 ATEX 009U FEA SCA AL () AL3 () BJM6 BJMI6 BJS6 EV6 BJE6... BJB BJAO6... BJP6 BJA6 EL6 ITVE CBS EP6 VSP6 OUMA OUPA OUTA th. 5 SNA 99 476 R500 SNA 96 896 R0000 SNA 63 043 R00 SNA 63 6 R0000 SNA 007 865 R600 0 poles SNA 74 784 R000 SNA 68 604 R600 SNA 99 466 R300 0 poles 4 blocks SNA 74 43 R400 SNA 6 54 R00 SNA 73 67 R00 SNA 79 694 R0300 SNA 78 408 R400 SNA 63 47 R700 SNA 63 433 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 5 6 8 7 9 R R See markers section RC65 - RC60 - RTM7 () A circuit separator SC... is required with these accessories. 35

T07098 04055 SNC 60 004 C00 Standard and ground miniblocks - Screw clamp - AO IN / IN 3 / Base mount R... 4/6.AO.Ex Spacing 6 mm.38" Mounting rail IN S 4/6... AO.Ex Spacing 6 mm.38" Mounting rail IN 3 B 4/6.AO.Ex Spacing 6 mm.38" Base mount with flanges accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. R 4/6.PI.AO.Ex * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 Spacing 6 mm.38" Mounting rail IN End stop th. 6.5 mm BARL V0 End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 5 x 5 x PR Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 99 40 R00 SNA 6 900 R700 SNA 94 836 R000 SNA 64 600 R00 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard blocks UL 94 V0 Terminal blocks for ground wires UL 94 V0 Wire size 3 5 8 6 4 7 Orange body (without rib) Blue body Yellow body/green (without rail contact) Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End stop (IN ) grey End stop (IN 3) grey 3 End section grey orange 4 End section kit with grey screw locks (right + left) orange 5 Separator grey orange 6 Test device 7 Test plug 8 Screwless jumper bar to be inserted into AO jaw orange IP0 9 Comb-type jumper bar InsulatinG 0 IC jumper Manual tool Semi-automatic tool 3 Interchangeable head kit 4 Pneumatic tool kit 5 Extraction tool kit R 4/6.AO.Ex R 4/6.AO.Ex RE 4/6.AO.Ex R 4/6.PI.AO.Ex BARL V0 FEA V0 FEA V0 FEA5 V0 FEA5 V0 CJ BJAO6... PC6 EIP OUMA OUPA OUTA OUTA EXA SNA 46 0 R0500 S 4/6.AO.Ex* SNA 46 08 R300 SNA 46 09 R400 S 4/6.N.AO.Ex* SNA 46 03 R0600 BAL V0 FEA V0 FEA V0 FEA5 V0 FEA5 V0 CJ BJAO6... PC6 EIP A,5 V OUMA OUPA OUTA OUTA EXA B 4/6.AO.Ex IEC UL/CSA IEC UL/CSA IEC UL/CSA 0. - 4-0 AWG 0. - 4-0 AWG 0. - 4-0 AWG 0. - 4-0 AWG 0. - 4-0 AWG 0. - 4-0 AWG 0.8 -.5-6 AWG 0.8 -.5-6 AWG 0.8 -.5-6 AWG 0.34 -.5-6 AWG 0.34 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 6-0 AWG.5 mm 6-0 AWG.5 mm 6-0 AWG 80 A / s 9.5 mm /.37" 9.5 mm /.37" 9.5 mm /.37" 0,5-0,8 Nm / 4,4-7, Ib-in 0,5-0,8 Nm / 4,4-7, Ib-in 0,5-0,8 Nm / 4,4-7, Ib-in EExe : 40 V EExi : 90 V EExe : 40 V EExi : 90 V EExe : 40 V EExi : 90 V EEx : 7,5 A EEx : 7,5 A EEx : 7,5 A I M / M II G / G I M / M II G / G I M / M II G / G LCIE 0 ATEX 003U LCIE 0 ATEX 003U LCIE 0 ATEX 003U th. 6.5 th..5 th..5 th. 5.0 th. 5.0 SNA 99 40 R00 SNA 99 4 R600 SNA 99 4 R700 SNA 99 433 R00 SNA 99 434 R300 SNA 73 059 R0300 IA. SNA 007 865 R600 SNA 3 550 R400 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 th. 9.0 th..5 th..5 th. 5.0 th. 5.0 SNA 46 064 R500 SNA 46 065 R600 SNA 399 903 R000 SNA 99 4 R600 SNA 99 4 R700 SNA 99 433 R00 SNA 99 434 R300 SNA 73 059 R0300 IA. SNA 007 865 R600 SNA 3 550 R400 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 FEA3 V0 FEA3 V0 FEA5 V0 FEA5 V0 CJ V BJAO6... PC6 EIP A,5 V OUMA OUPA OUTA OUTA EXA th. 5.0 th. 5.0 SNA 46 0 R0000 SNA 99 437 R600 SNA 99 438 R700 SNA 99 433 R00 SNA 99 434 R300 SNA 73 059 R0300 IA. SNA 007 865 R600 SNA 3 550 R400 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 9 0 3 4 5 R R See markers section Top of block RC65 - RCAL85 Top of block RC65 - RCAL85 Top of block RC65 - RCAL85 36

T07099 0405 Standard and ground miniblocks - Screw clamp - AO IN SNC 60 004 C00 R 4/8.AO.Ex Spacing 8 mm.35" Mounting rail IN accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. R 4/8.PI.AO.Ex Spacing 8 mm.35" Mounting rail IN End stop th. 6.5 mm BARL V0 Rail 5 x 5 x PR SNA 99 40 R00 SNA 64 600 R00 Standard blocks UL 94 V0 R 4/8.AO.Ex SNA 46 55 R000 Terminal blocks for ground wires UL 94 V0 Yellow body/green (without rail contact) Wire size Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End stop (IN ) grey End section grey orange 3 Separator grey orange 4 Test device R 4/8.PI.AO.Ex IEC UL/CSA 0. - 4-0 AWG 0. - 4-0 AWG -.5 6-4 AWG -.5 6-4 AWG.5 mm 4 AWG 300 A / s 9.5 mm /.37" 0,5-0,8 Nm / 4,4-7, Ib-in EExe : 550 V EExi : 375 V EEx : 4 A I M / M II G / G LCIE 0 ATEX 003U BARL V0 FEA V0 FEA V0 FEA5 V0 FEA5 V0 CJ th. 6.5 th..5 th..5 th. 5.0 th. 5.0 SNA 46 04 R0700 SNA 99 40 R00 SNA 99 4 R600 SNA 99 4 R700 SNA 99 433 R00 SNA 99 434 R300 SNA 73 059 R0300 3 4 5 5 Test plug 6 Comb-type jumper bar 7 IC jumper 8 Manual tool 9 Semi-automatic tool 0 Interchangeable head kit Pneumatic tool kit Extraction tool kit PC8 A,5 V OUMA OUPA OUTA OUTA EXA IA. SNA 007 865 R600 SNA 4 05 R000 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 6 7 8 9 0 R R See markers section Top of block RCAL85 37

T0709 04055 SNC 60 004 C00 Standard and ground miniblocks - AO - AO IN / IN 3 R,5/6.AO.Ex Spacing 6 mm.38" Mounting rail IN S,5/6... AO.Ex Spacing 6 mm.38" Mounting rail IN 3 accessory. The use of ground terminal blocks do not decrease the standard terminal blocks' voltage ratings. wires max. same gage and nature per AO connection. * UL - Hazardous locations Class I - Zone I - Ex e II T6 File # E9933 R,5/6.PI.AO.Ex Spacing 6 mm.38" Mounting rail IN End stop th. 6.5 mm BARL V0 End stop th. mm BAH V End stop th. 9, mm BAMH V0 V0 Rail 5 x 5 x PR Rail 35 x 7,5 x PR3.Z Rail 35 x 5 x,3 PR4 Rail 35 x 5 x,5 PR5 SNA 99 40 R00 SNA 6 900 R700 SNA 94 836 R000 SNA 64 600 R00 SNA 74 300 R700 SNA 68 500 R00 SNA 68 700 R00 Standard blocks UL 94 V0 Blue body R,5/6.AO.Ex SNA 46 05 R0000 S,5/6.AO.Ex* S,5/6.N.AO.Ex* SNA 46 066 R700 SNA 46 067 R000 Terminal blocks for ground wires UL 94 V0 3 4 Yellow body/green (without rail contact) Wire size Screw AO Short-circuit current (for ground blocks) A / s Wire stripping length Recommended torque Nm / Ib.in Voltage EN 5009 / EN 5000 Current EN 5009 / EN 5000 End stop (IN ) grey End stop (IN 3) grey 3 End section grey orange 4 Separator grey orange 5 Screwless jumper bar to be inserted into AO jaw orange IP0 6 Manual tool 7 Semi-automatic tool 8 Interchangeable head kit 9 Pneumatic tool kit 0 Extraction tool kit R,5/6.PI.AO.Ex BARL V0 FEA V0 FEA V0 FEA6 V0 FEA6 V0 BJAO6... OUMA OUPA OUTA OUTA EXA IEC UL/CSA 0.8 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 6 AWG 80 A / s BAL V0 FEA V0 FEA V0 FEA6 V0 FEA6 V0 BJAO6... OUMA OUPA OUTA OUTA EXA IEC UL/CSA 0.8 -.5-6 AWG 0.34 -.5-6 AWG.5 mm 6-0 AWG EExe : 550 V EExi : 375 V EExe : 550 V EExi : 375 V EEx : 7,5 A EEx : 7,5 A I M / M II G / G I M / M II G / G LCIE 0 ATEX 003U LCIE 0 ATEX 003U th. 6.5 th..5 th..5 th. 5.0 th. 5.0 SNA 46 06 R000 SNA 99 40 R00 SNA 99 43 R000 SNA 99 44 R00 SNA 99 435 R400 SNA 99 436 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 th. 9.0 th..5 th..5 th. 5.0 th. 5.0 SNA 399 903 R000 SNA 99 43 R000 SNA 99 44 R00 SNA 99 435 R400 SNA 99 436 R500 SNA 79 466 R0600 SNA 78 944 R0400 SNA 05 84 R0300 SNA 05 70 R00 SNA 05 7 R0000 5 6 8 7 9 0 R R See markers section Top of block RC65 - RCAL85 Top of block RC65 - RCAL85 38

T070 04058 SNC 60 004 C00 Numerical and alphabetical index SNA 007 865 R600 6 SNA 03 00 R600 6 SNA 03 06 R000 8 SNA 03 065 R400 7 SNA 03 5 R500 6 SNA 03 6 R600 6 SNA 03 775 R0000 0 SNA 03 776 R000 0 SNA 03 975 R00 6 SNA 05 08 R00 6 SNA 3 003 R000 6 SNA 3 065 R500 8 SNA 3 0 R000 7 SNA 3 48 R0500 9 SNA 3 544 R00 6 SNA 3 548 R600 6 SNA 3 550 R400 6 SNA 3 85 R600 8 SNA 4 05 R000 0 SNA 4 85 R0500 6 SNA 6 54 R00 3 SNA 6 70 R00 9 SNA 6 78 R500 6 SNA 6 77 R000 0 SNA 6 900 R700 8 SNA 6 934 R0400 8 SNA 8 33 R700 8 SNA 8 495 R700 9 SNA 8 68 R000 7 SNA 8 707 R0300 6 SNA 6 576 R700 6 SNA 6 69 R400 6 SNA 7 600 R0500 6 SNA 8 499 R500 9 SNA 8 68 R0300 7 SNA 46 00 R700 6 SNA 46 00 R000 6 SNA 46 003 R00 7 SNA 46 004 R00 7 SNA 46 005 R300 7 SNA 46 006 R400 7 SNA 46 009 R0700 9 SNA 46 00 R300 6 SNA 46 0 R000 6 SNA 46 0 R00 6 SNA 46 03 R00 6 SNA 46 04 R300 6 SNA 46 05 R400 6 SNA 46 06 R500 6 SNA 46 07 R600 9 SNA 46 08 R700 9 SNA 46 09 R000 9 SNA 46 00 R500 8 SNA 46 0 R00 7 SNA 46 0 R300 7 SNA 46 03 R400 6 SNA 46 04 R500 8 SNA 46 05 R600 8 SNA 46 06 R700 8 SNA 46 07 R000 7 SNA 46 08 R00 7 SNA 46 09 R00 8 SNA 46 030 R700 8 SNA 46 03 R400 30 SNA 46 03 R500 30 SNA 46 033 R600 30 SNA 46 034 R700 30 SNA 46 035 R000 30 SNA 46 036 R00 33 SNA 46 037 R00 33 SNA 46 038 R300 34 SNA 46 039 R400 34 SNA 46 040 R000 33 SNA 46 04 R600 34 SNA 46 04 R700 30 SNA 46 043 R000 7 SNA 46 044 R00 8 SNA 46 045 R00 3 SNA 46 046 R300 3 SNA 46 047 R400 8 SNA 46 048 R0500 8 SNA 46 049 R0600 7 SNA 46 050 R0300 7 SNA 46 05 R000 7 SNA 46 05 R00 7 SNA 46 053 R00 7 SNA 46 054 R300 7 SNA 46 055 R400 7 SNA 46 056 R500 7 SNA 46 057 R600 7 SNA 46 058 R0700 8 SNA 46 059 R0000 8 SNA 46 060 R0500 8 SNA 46 06 R00 8 SNA 46 06 R300 35 SNA 46 063 R400 35 SNA 46 064 R500 36 SNA 46 065 R600 36 SNA 46 066 R700 38 SNA 46 067 R000 38 SNA 46 068 R000 8 SNA 46 069 R000 33 SNA 46 070 R0700 33 SNA 46 07 R400 30 SNA 46 07 R500 30 SNA 46 073 R600 8 SNA 46 074 R700 30 SNA 46 075 R000 33 SNA 46 076 R00 34 SNA 46 077 R00 34 SNA 46 078 R0300 3 SNA 46 079 R0400 3 SNA 46 080 R00 34 SNA 46 08 R700 3 SNA 46 098 R000 0 SNA 46 04 R300 0 SNA 46 99 R00 6 SNA 46 00 R700 6 SNA 46 0 R0400 6 SNA 46 0 R0500 36 SNA 46 03 R0600 36 SNA 46 04 R0700 37 SNA 46 05 R0000 38 SNA 46 06 R000 38 SNA 46 07 R000 9 SNA 46 08 R300 36 SNA 46 09 R400 36 SNA 46 0 R0000 36 SNA 46 R500 SNA 46 R600 SNA 46 7 R500 SNA 46 37 R700 6 SNA 46 38 R0000 7 SNA 46 39 R000 7 SNA 46 40 R600 6 SNA 46 45 R0700 6 SNA 46 46 R0000 9 SNA 46 47 R000 9 SNA 46 5 R0500 8 SNA 46 53 R0700 8 SNA 46 55 R000 37 SNA 46 59 R500 6 SNA 46 60 R00 9 SNA 46 6 R0700 6 SNA 46 6 R0000 6 SNA 46 63 R000 9 SNA 46 7 R000 SNA 46 73 R0300 SNA 46 76 R0600 6 SNA 46 77 R0700 6 SNA 46 93 R000 6 SNA 46 30 R000 3 SNA 46 303 R000 3 SNA 46 304 R0300 3 SNA 46 305 R0400 4 SNA 46 306 R0500 4 SNA 46 307 R0600 3 SNA 46 308 R700 3 SNA 46 309 R000 3 SNA 46 30 R0400 4 SNA 46 3 R00 4 SNA 63 043 R00 6 SNA 63 046 R400 6 SNA 63 050 R0400 6 SNA 63 070 R0000 9 SNA 63 8 R00 SNA 63 8 R0500 9 SNA 63 40 R700 3 SNA 63 6 R0000 6 SNA 63 6 R000 7 SNA 63 3 R00 9 SNA 63 33 R400 7 SNA 63 35 R600 7 SNA 63 394 R600 SNA 63 47 R700 6 SNA 63 48 R000 7 SNA 63 49 R00 7 SNA 63 430 R600 7 SNA 63 43 R300 8 SNA 63 43 R400 7 SNA 63 433 R500 6 SNA 64 573 R00 SNA 64 574 R300 SNA 64 575 R400 SNA 64 576 R500 SNA 64 58 R300 SNA 64 58 R400 SNA 64 583 R500 SNA 64 584 R600 SNA 64 585 R700 SNA 64 586 R000 SNA 64 587 R00 SNA 64 588 R00 SNA 64 600 R00 6 SNA 64 736 R500 SNA 64 737 R600 SNA 64 950 R0000 9 SNA 67 39 R0600 6 SNA 67 860 R000 8 SNA 68 37 R0500 8 SNA 68 38 R600 8 SNA 68 73 R00 SNA 68 400 R600 9 SNA 68 485 R700 9 SNA 68 500 R00 6 SNA 68 56 R500 SNA 68 57 R600 SNA 68 58 R0700 SNA 68 59 R0000 SNA 68 50 R0500 SNA 68 5 R00 SNA 68 5 R300 SNA 68 53 R400 SNA 68 604 R600 6 SNA 68 69 R600 6 SNA 68 664 R00 7 SNA 68 700 R00 6 SNA 68 96 R0400 9 SNA 68 973 R0700 SNA 68 974 R0000 SNA 73 06 R000 6 SNA 73 058 R000 9 SNA 73 059 R0300 6 SNA 73 060 R0000 7 SNA 73 47 R000 8 SNA 73 06 R0400 6 SNA 73 07 R0500 6 SNA 73 7 R600 6 SNA 73 8 R0700 6 SNA 73 9 R0000 6 SNA 73 R00 6 SNA 73 3 R400 6 SNA 73 6 R700 6 SNA 73 36 R00 8 SNA 73 37 R00 8 SNA 73 38 R0300 8 SNA 73 39 R0400 8 SNA 73 30 R000 8 SNA 73 33 R000 8 SNA 73 37 R400 8 SNA 73 38 R0500 8 SNA 73 33 R000 8 SNA 73 55 R00 9 SNA 73 56 R00 9 SNA 73 57 R300 9 SNA 73 59 R500 9 SNA 73 50 R00 9 SNA 73 530 R400 9 SNA 73 67 R00 6 SNA 73 888 R000 SNA 74 R600 6 SNA 74 3 R700 6 SNA 74 4 R000 6 SNA 74 5 R00 6 SNA 74 300 R700 6 SNA 74 43 R400 30 SNA 74 448 R0700 30 SNA 74 784 R000 6 SNA 74 788 R0400 SNA 74 789 R0500 7 SNA 76 6 R00 9 SNA 76 7 R300 9 SNA 76 8 R0400 9 SNA 76 9 R0500 9 SNA 76 30 R000 9 SNA 76 59 R300 9 SNA 76 60 R000 9 SNA 76 78 R600 6 SNA 76 79 R700 6 SNA 76 80 R0500 6 SNA 76 8 R00 6 SNA 76 8 R300 6 SNA 76 663 R0000 6 SNA 76 664 R000 6 SNA 76 665 R000 6 SNA 76 666 R0300 6 SNA 76 667 R0400 6 SNA 76 669 R600 7 SNA 76 670 R300 7 SNA 76 67 R0000 7 SNA 76 67 R000 7 SNA 76 673 R000 7 SNA 76 675 R0400 7 SNA 76 676 R0500 7 SNA 76 677 R0600 7 SNA 76 678 R700 7 SNA 76 679 R000 7 SNA 76 736 R00 9 SNA 76 737 R00 9 SNA 76 738 R0300 9 SNA 76 739 R0400 9 SNA 76 740 R00 9 SNA 77 508 R0700 8 SNA 77 509 R0000 8 SNA 77 50 R400 8 SNA 77 5 R00 8 SNA 77 65 R0500 9 SNA 77 65 R0600 6 SNA 77 653 R0700 7 SNA 77 654 R0000 7 SNA 77 8 R700 0 SNA 78 04 R500 0 SNA 78 05 R600 0 SNA 78 06 R700 0 SNA 78 07 R000 0 SNA 78 03 R500 0 SNA 78 033 R600 0 SNA 78 408 R400 3 SNA 78 745 R400 6 SNA 78 746 R500 6 SNA 78 944 R0400 30 SNA 79 466 R0600 30 SNA 79 63 R000 8 SNA 79 64 R000 8 SNA 79 65 R0300 8 SNA 79 66 R0400 8 SNA 79 67 R0500 8 SNA 79 66 R0600 7 SNA 79 67 R0700 8 SNA 79 68 R000 7 SNA 79 69 R00 7 SNA 79 630 R600 7 SNA 79 63 R0300 7 SNA 79 668 R000 9 SNA 79 669 R00 9 SNA 79 670 R600 9 SNA 79 67 R300 9 SNA 79 67 R400 9 SNA 79 694 R0300 3 SNA 79 76 R600 SNA 90 06 R600 3 SNA 90 07 R700 3 SNA 90 08 R000 3 SNA 90 09 R00 4 SNA 93 065 R600 8 SNA 93 48 R0600 9 SNA 94 434 R0600 SNA 94 836 R000 8 SNA 96 896 R0000 30 SNA 96 987 R0300 SNA 98 33 R000 8 SNA 98 368 R700 6 SNA 98 499 R400 9 SNA 98 68 R000 7 SNA 99 30 R0700 6 SNA 99 304 R000 8 SNA 99 305 R000 6 SNA 99 306 R0300 6 SNA 99 336 R000 30 SNA 99 339 R0300 30 SNA 99 34 R0500 33 SNA 99 343 R0700 33 SNA 99 47 R00 3 SNA 99 40 R00 6 SNA 99 4 R600 36 SNA 99 4 R700 36 SNA 99 43 R000 38 SNA 99 44 R00 38 SNA 99 433 R00 36 SNA 99 434 R300 36 SNA 99 435 R400 38 SNA 99 436 R500 38 SNA 99 437 R600 36 SNA 99 438 R700 36 SNA 99 466 R300 3 SNA 99 476 R500 35 SNA 99 55 R000 30 SNA 05 84 R0300 30 SNA 05 70 R00 36 SNA 05 7 R0000 36 SNA 05 767 R600 3 SNA 05 768 R700 3 SNA 05 769 R000 3 SNA 05 770 R500 4 SNA 05 77 R00 4 SNA 05 77 R300 3 SNA 05 773 R400 3 SNA 05 774 R500 3 SNA 05 775 R600 3 SNA 05 776 R700 3 SNA 05 777 R000 3 SNA 05 778 R00 4 SNA 05 779 R00 4 SNA 90 8 R000 9 SNA 90 8 R000 9 SNA 9 04 R000 7 SNA 9 04 R00 7 SNA 9 05 R00 7 SNA 9 05 R300 7 SNA 9 06 R400 7 SNA 9 06 R500 7 SNA 9 077 R400 7 SNA 9 0 R300 7 SNA 9 03 R400 7 SNA 9 04 R500 7 SNA 9 05 R600 7 SNA 9 06 R700 7 SNA 9 07 R000 7 SNA 9 08 R000 7 SNA 9 09 R000 7 SNA 9 0 R600 7 SNA 9 R600 8 SNA 9 3 R700 8 SNA 9 8 R400 8 SNA 9 9 R500 8 SNA 9 44 R400 8 SNA 9 45 R500 8 SNA 9 50 R0600 7 SNA 9 60 R0000 7 SNA 9 6 R500 8 SNA 9 6 R600 8 SNA 9 70 R000 8 SNA 9 94 R700 8 SNA 9 95 R000 8 SNA 9 30 R000 9 SNA 9 30 R0300 9 SNA 9 3 R300 9 SNA 9 3 R400 9 SNA 9 3 R600 9 SNA 9 33 R700 9 SNA 9 34 R000 9 SNA 9 35 R00 9 SNA 9 35 R0400 7 SNA 9 36 R0600 7 SNA 9 37 R0000 7 SNA 399 903 R000 6 /5.AO.Ex 33 /5.N.AO.Ex 33 /5.P.AO.Ex 33,5/6.AO.Ex 33,5/6..AO.Ex 35,5/6..N.AO.Ex 35,5/6.N.AO.Ex 33,5/6.P.AO.Ex 33,5/5.L.L.Ex 8,5/5.L.Ex 7,5/5.3L.Ex 7,5/5.4L.Ex 7,5/5.AO.Ex 30,5/5.N.L.L.Ex 8,5/5.N.L.Ex 7,5/5.N.3L.Ex 7,5/5.N.4L.Ex 7,5/5.N.AO.Ex 30,5/5.P.L.Ex 7,5/5.P.3L.Ex 7,5/5.P.4L.Ex 7,5/5.P.AO.Ex 30,5/6.A.Ex 0,5/6.A.N.Ex 0,5/8.AO.Ex 34,5/8.N.AO.Ex 34,5/8.P.AO.Ex 34 35/7.FF.Ex 3 4/6.L.Ex 8 4/6.AO.Ex 30 4/6..AO.Ex 3 4/6..N.AO.Ex 3 4/6.N.L.Ex 8 4/6.N.AO.Ex 30 4/6.P.L.Ex 8 4/6.P.AO.Ex 30 4/8.AO.Ex 34 4/8.N.AO.Ex 34 4/8.P.AO.Ex 34 6/8.L.Ex 8 6/8.AO.Ex 30 6/8.AO3.Ex 3 6/8.N.L.Ex 8 6/8.N.AO.Ex 30 6/8.N.AO3.Ex 3 6/8.P.L.Ex 8 6/8.P.AO.Ex 30 6/8.P.AO3.Ex 3 B,5/5.L.Ex 9 B,5/5.N.L.Ex 9 B 4/6.AO.Ex 36 R,5/6.AO.Ex 38 R,5/6.PI.AO.Ex 38 R,5/0.P.4L.Ex 9 R,5/5.L.Ex 9 R 4/6..Ex 6 R 4/6..N.Ex 6 R 4/6.AO.Ex 36 R 4/6.Ex 6 R 4/6.N.Ex 6 R 4/6.P.Ex 6 R 4/6.PI.AO.Ex 36 R 4/8.AO.Ex 37 R 4/8.PI.AO.Ex 37 RE 4/6.AO.Ex 36 S,5/6.AO.Ex 38 S,5/6.N.AO.Ex 38 S 4/6.AO.Ex 36 S 4/6.N.AO.Ex 36 M M 0/0.Ex 7 M 0/0.N.Ex 7 M 0/0.P.Ex 7 M 0/0.PI.Ex 7 M 0/0.RS.Ex M 6/.Ex 7 M 6/.N.Ex 7 M 6/.P.Ex 7 M 35/6.Ex 8 M 35/6.N.Ex 8 M 35/6.P.Ex 8 M 4/6.3A.Ex 6 M 4/6.3A.N.Ex 6 M 4/6.4A.Ex 6 M 4/6.4A.N.Ex 6 M 4/6..Ex 9 M 4/6.Ex 6 M 4/6.N.Ex 6 M 4/6.P.Ex 6 M 4/6.PI.Ex 6 M 4/6.RS.Ex M 6/8.Ex 7 M 6/8.N.Ex 7 M 6/8.P.Ex 7 M 6/8.PI.Ex 7 M 6/8.RS.Ex M 70/.Ex 8 M 70/.N.Ex 8 M 70/.P.Ex 8 M 95/6.Ex 8 M 95/6.N.Ex 8 M 95/6.P.Ex 8 MA,5/5...Ex 9 MA,5/5..Ex 9 MA,5/5..N.Ex 9 MA,5/5.Ex 6 MA,5/5.N.Ex 6 MA,5/5.P.Ex 6 MA,5/5.PI.Ex 6 MTC 6.Ex 39

As part of its on-going product improvement, reserves the right to modify the characteristics or the products described in this document. The information given is not-contractual. For further details please contact the company marketing these products in your country. Publication N : SNC 60 004 C00 Connection epartment 84, rue Léon Blum F - 6967 Villeurbanne cedex / France Export Sales epartment 0 rue Ampère Z.I. - B.P. 4 F - 69685 Chassieu cedex / France Tel. : +33 (0) 4 7 7 Fax. : +33 (0) 4 7 935 www.abb.fr/entrelec