Pressure switches for gas and air Pressure sensors line overview.0 Printed in Germany Rösler Druck Edition 08.00 Nr. 28 373 Page
Karl Dungs GmbH & Co. - The pressure switch specialists For decades we have been manufacturing pressure switches for a wide variety of applications. The original application field was firing systems followed by air-conditioning and ventilation systems as well as special machine tools. Today you can select a device tailored to meet your specific requirements from one of the largest pressure switch product lines. line overview of pressure switches for gas and air/contents Leaflet numbers Page 2 Short technical overview, conversion tables Page 3 overview Page 4 DDS differential pressure sensor Page Pressure switch as per EN 84 Page 6 Double pressure switch as per EN 84 Page 7 Pressure switch as per EN 84 Page 8 Pressure limiter as per EN 84 Page 8 Differential pressure limiter as per EN 84 Page 9 Vacuum switch as per EN 84 Page 9 Differential pressure switch as per EN 84 Page 0 DUNGS Klima-Set Page Centrifugal switch FW 00 / 2 as per EN 84 Page Pressure switch typeplates Page 2 For more detailed information, please refer to the leaflets listed below Pressure switch product line overview.00 High-pressure, gas and air pressure switches GW.0 Pressure switch GW A4.02 Pressure switch for multiple actuators GW A2.03 Differential pressure switch for air LGW A.04 Differential pressure switch for air LGW A2, LGW A2P.0 Differential pressure switch for air flue and exhaust gases LGW A4, LGW A4/2 (IP 6).07 Pressure switch for gas Differential pressure switch for air LGW C2. Differential pressure switch for air flue and exhaust gases LGW C3.4 Differential pressure sensor for gases and air DDS 9.0 Differential pressure switch for gas GGW A4. Klima-Set KS...C2.3 Centrifugal switch FW 00 / 2.08 Compact pressure switches GW A.2 Compact pressure switches GW A6.6 Page 2
Brief technical data pressures Temperature ranges Pressure switch for gas and air Refer to individual tables Ambient temperature: - C to +60 C Medium temperature: - C to +80 C Differential pressure switch for air Refer to individual tables Ambient temperature: - C to +8 C Medium temperature: - C to +8 C Important: Make sure that no condensate can enter into the pressure switch. Icing may occur at temperatures below zero and may lead to a malfunction or failure of the equipment. Materials -conveying housing: aluminium die casting Diaphragms: NBR basis Protective hood: polycarbonate, for GW../2 design hood made of die-cast aluminium Switching contacts: fine silver Special design: gold-plated fine silver Housing: polycarbonate Diaphragms: NBR or EPDM Switching contacts: fine silver or goldplated fine silver Electrical connection At terminal screws via PG cable gland, for 7 mm dia. to 2. mm dia. cables or plug connection with angle connector as per DIN 43 60, 3-pin and protective contact. Refer to individual tables At terminal screws via PG cable gland, for 7 mm dia. to 2. mm dia. cables or PG 9 For LGW...A and LGW...C3, flattype connector for 6.3 mm plug-in sleeves as per DIN 46 342 or plug connection with angle connector as per DIN 43 60, 3-pin and protective contact. Refer to individual tables Conversion table for pressure units Unit Name Pa bar mbar µbar N/mm 2 lbf/in 2 Pa = N/m 2 Pascal 0-0.0 0 0-6 0.0004 bar Bar 0 000 0 6 0. 4.037 mbar Millibar 00 0-3 000 0-4 0.04 µbar Microbar 0. 0-6 0-3 0-7 0.00004 N/mm 2 Newton per mm 2 0 6 0 0 4 0 7 4.03 lbf/in 2 (psi) pounds per square inch 6894.76 0.0689 68.9 68948 0.00689 Page 3
overview Pressure switches for gases and air, p max mbar LGW A4/2 Square shape IP 6 Die-cast hood Epoxy coating G /4 threaded connection Switching pressure adjustable by hand wheel GW...A2 Square shape pressure switch for DUNGS multiple actuators O ring flange connection GW...A3 Square shape pressure switch for multiple actuators O ring flange connection GW...A4 Square shape pressure switch G /4 threaded connection Switching pressure adjustable by hand wheel GW A Rectangular shape Compact pressure switch for DUNGS multiple actuators O ring flange connection GW A6 Rectangular shape Compact pressure switch G /4 threaded connection Switching pressure adjustable by hand wheel Double pressure switches for gases and air (Überdruckbereich) GW...A6/...A6 Rectangular shape Flanged single housings Switching pressures adjustable by hand wheel Pressure switches for gases and air, p max 2,0 bar, Metallmembrane GW /2000/0 A4 Round shape G /4 threaded connection Switching pressure adjustable by hand wheel GW A4/2, GW 2000 A4/2, GW 0 A4/2 Pressure limiters for gas and air NB...A2 Square shape Interlocked as pressure falls Pressure switch for DUNGS multiple actuators NB...A4 Square shape Interlocked as pressure falls Switching pressure adjustable by hand wheel Compact pressure switch ÜB...A2 Square shape Interlocked as pressure rises Pressure switch for DUNGS multiple actuators ÜB...A4 Square shape Interlocked as pressure rises Switching pressure adjustable using hand wheel Compact pressure switch Differential pressure switches for gases and air GGW A4 Square shape Differential pressure switch for gas in pressure range G /4 and G /8 threaded connections Switching pressure adjustable by hand wheel GGW A4/U Square shape Differential pressure switch for gas in vacuum range G /4 and G /8 threaded connections Switching pressure adjustable by hand wheel LGW A4 Square shape Differential pressure switch for air, pressure switch for gas G /4 and G /8 threaded connections Switching pressure adjustable by hand wheel Differential pressure switches for air LGW...A Square shape Fixed adjustment at factory Connection for 4 mm dia. hose LGW...A2 Square shape Switching pressure adjustable by hand wheel Connection for 4 mm dia. hose LGW...A2P Square shape Test button Switching pressure adjustable by hand wheel G /4 (tapered) and G /8 threaded connections LGW...C2 Round shape Large diaphragm diameter Switching pressure adjustable by hand wheel Connection for 4 mm dia. and 6 mm dia. hoses LGW...C3 Round shape Fixed adjustment at factory Connection for 6 mm dia. hose LGW...A4/2 Square shape IP 6 Die-cast hood Powder-coated G /4 and G /8 threaded connection Switching pressure adjustable by hand wheel Klima-Set (differential pressure switch for ventilation and air-conditioning systems with complete range of accessories) KS...C2 Round shape Switching pressure adjustable by hand wheel Suitable for DDC applications Electronic differential pressure sensor for gases and air DDS Non-contacting transformer (pressure to voltage) with continuous output 0-0 V Round shape, aluminium version Different measuring ranges possible G /8 threaded connection Page 4
Differential pressure sensor for gas and air Pressure sensor in compliance with DIN 3398. For gases of families, 2, 3 and other neutral media. Differential pressure sensor DDS 00-M2 DDS 0-M2 DDS -M2 2 02 26 38 2 0 Setting ranges [Pa] 0-00 0-0 0 - pressure [kpa] DDS 000-M2 2 06 0-000 DDS -M2 2 07 0 - DDS 3000-M2 23 33 0-3000 Differential pres- DDS 00-M2 sure sensor with DDS 0-M2 mounting DDS -M2 kit DDS 000-M2 29 099 29 02 29 0 29 08 0-00 0-0 0-0 - 000 DDS -M2 29 0 - DDS 3000-M2 23 284 0-3000 Mounting kit, complete 26 992 Mounting bracket 230 288 Connection hose ø 4 (0 x) 230 303 DDS P + P2 p p U,(I) Switching modules SM-ES-220 VAC p SM-ES-24 VAC SM-ES-24 VAC 2 3 4 6 7 8 9 2 3 4 6 7 8 9 2 3 4 6 7 8 9 2 3 4 6 7 8 9 Blower errors DDS Filter exchange required Forced switch-off Page
Pressure switch for firing systems Pressure switch as per EN 84 for gases of families, 2, 3 and other neutral gaseous media. EU type test approval as per EU Appliance Directive. Pressure switch for gas and air GW 3 A2 GW 0 A2 Setting ranges [mbar] 2 230 2 23 Switching difference p [mbar] 0,3 0, pressure [mbar] GW 0 A2 2 232 2, - 0 [AG G3 V2] GW 0 A2 GW 0 A2 GW 0 A2 2 233 2 234 2 23-0 - 0 30-0 GW A2 2 236 00-0 GW 0 A3,0 IP 00-4 0 GW 0 A3 2, - 0 2, IP 00-4 0 GW 00 A3 20-00 8,0 IP 00-4 0 GW 3 A 229 20 0,7-3 0,7 [AG G3 V2] GW 0 A GW 0 A GW 0 A 22 938 22 939 22 940 2-0 - 0 0-0 2, GW A 227 639 00 - [AG M MS9 V0 VS3] GW A4/2 237 804 00-0 IP 6 Pressure switch symbol GW A LGW A4/2 Page 6
Pressure switch for firing systems Double pressure switch as per EN 84 for gases of families, 2, 3 and other neutral gaseous media. EU type test approval as per EU Appliance Directive. Setting ranges [mbar] Switching difference p [mbar] pressure [mbar] Pressure switch for gas and air GW 3 A6 GW 0 A6 228 723 228 724 0,7-3 2-0 0,7,0 [AG G3 MS9 V0] GW 0 A6 GW 0 A6 GW A6 228 72 228 726 228 727-0 0-0 00-2, Double pressure switch for gas and air GW3A6/3A6 GW3A6/0A6 GW0A6/0A6 229 23 229 236 229 237 0,7-3 0,7-3 0,7-3 2-0 2-0 2-0 0,7 0,7 0,7,0,0,0 GW0A6/0A6 229 238 2-0 - 0,0 2, [MIN: G3 M9 VS3 VS0] [MA: G3 MS9 V3 V0] GW0A6/0A6 229 239 GW0A6/0A6 229 240 GW0A6/0A6 229 24 GW0A6/0A6 229 242 2-0 0-0 - 0-0 - 0 0-0 0-0 0-0,0 2, 2, 2,,0 GWA6/A6 229 243 00-00- Pressure switch for firing systems Pressure switch as per DIN 3398, DIN EN 3398, Part 3 and DIN EN 84 for gases of families, 2, 3 and other neutral gaseous media. EU type test approval as per EU Appliance Directive. Setting ranges [mbar] Switching difference p [mbar] pressure [mbar] Pressure switch GW A4 GW A4/2 232 034 232 0 00-00 - IP 6 2000 2000 GW 2000 A4 GW 2000 A4/2 232 037 232 06 300-2000 300-2000 0 0 IP 6 4000 4000 GW 0 A4 GW 0 A4/2 232 039 232 07 000-0 000-0 00 00 IP 6 7200 7200 GW 0 A2 GW A6 LGW 0 A4 Page 7
Pressure switch for firing systems Pressure switch as per DIN 3398, Part, EN 84 for gases of families, 2, 3 and other neutral gaseous media. EU type test approval as per EU Appliance Directive. Setting Switching difference ranges [mbar] p [mbar] pressure [mbar] Pressure limiter [AG G3 V2] NB 0 A2 NB 0 A2 NB A2 2 237 2 240 2 24 2, - 0 30-0 00 - NB 0 A4 20 34 2, - 0 [AG PG MS9 V0] NB 0 A4 NB A4 20 93 20 97 30-0 00 - Pressure limiter [AG G3 V2] ÜB 0 A2 ÜB 0 A2 ÜB A2 2 242 2 24 2 246 2, - 0 30-0 00 - ÜB 0 A4 20 37 2, - 0 [AG PG MS9 V0] ÜB 0 A4 ÜB A4 38 630 20 970 30-0 00 - ÜB 0 A4 LGW 3 A2 LGW 3 A2 P Page 8
Pressure switch for firing systems Differential pressure switch as per EN 84 for gases of families, 2, 3 and other neutral gaseous media. EU type test approval as per EU Appliance Directive. Setting Switching difference ranges [mbar] p [mbar] pressure [mbar] Pressure GGW 3 A4 232 08 0,3 [AG M MS9 V0 VS3 NH 3 best.] GGW 0 A4 GGW 0 A4 GGW 0 A4 232 09 232 0 232 2, - 0 30-0 0, Vacuum GGW 3 A4-U 232 99-0,4 - -3 0,3 [AG M MS9 V0 VS3 NH 3 best.] GGW 0 A4-U GGW 0 A4-U GGW 0 A4-U 232 992 232 993 232 994 - - -0-2, - -0-30 - -0 0, LGW A LGW C2 LGW C3 Page 9
Differential pressure switches for air, flue and exhaust gases in firing systems Differential pressure switches per DIN 3398 Part 2; LGW A4 DIN EN 84 EU type test approval as per EU Appliance Directive. Setting Switching difference ranges [mbar] p [mbar] pressure [mbar] Differential pres- LGW 3 A sure LGW 0 A switch for air LGW 0 A 2, - 0 0,3 0, 00 00 00 LGW 3 A2 07 409 0,3 [AG PG V9] LGW 0 A2 LGW 0 A2 07 47 07 42 2, - 0 0, LGW 0 A2 07 433 30-0 LGW 3 A2P 20 204 0,3 [AG PG V9] LGW 0 A2P 20 22 LGW 0 A2P 20 220 2, - 0 0, LGW0 A2P 20 238 30-0 LGW 3 A4 22 90 0,3 ** [AG PG MS9 VS3 V0] LGW 0 A4 LGW 0 A4 LGW 0 A4 22 9 22 92 22 93 2, - 0 30-0 0, ** ** ** [AG PG V3] LGW, C2 LGW 3 C2 LGW 0 C2 22 200 22 7 22 72 0,2 -, 0,2 0,3 0, 0 0 0 LGW, C3 0,2 -, 0,07-0,3 0 LGW 3 C3 0,2-0,4 0 LGW 0 C3 0,20-0,6 0 LGW 3 A4/2 232 04 0,3 ** [AG M MS9 V0] LGW 0 A4/2 232 046 LGW 0 A4/2 232 048 LGW 0 A4/2 232 00 2, - 0 30-0 0, ** ** ** * optionally IP 42 or IP 20. Pressure switch with IP 0 or IP 20 must be installed so that degree of IP 44 is ensured during operation. ** applies only to connection to G /4, lower pressure chamber Page 0
Pressure switch for ventilation and air-conditioning systems Differential pressure switch for air DUNGS Klima-Set with complete mounting kit Setting ranges [Pa] Switching difference p [Pa] pressure [kpa] Klima-Set KS 0 C2 27 773 20-0 8 KS 300/ C2 224 390 20-300 20 KS 300 C2 27 774 40-300 20 KS C2 226 88 30-2 KS C2 27 77 70-0 KS 000 C2 27 776 00-000 40 Mounting kit KS for 3000 KS...C2 complete 27 777 supplied 20-3000 80 Extension tube Hose connection Drilling template Mounting screws 4 x.x2000 mm dia. connection hose Centrifugal switch supply loss for forced-air burner and ventilator motors as per DIN 32 726 DIN-tested and registered to DIN-DVGW Speeds Electrical data Centrifugal switch FW 00/2 FW 00/2 20 32 2 23 IP 44 Switch-on speed (as speed increases), DIN 32 726: n 26 rpm - Switch-off speed (as speed decreases), DIN 32 726: n 260 rpm - Special speeds on request Range: 800-4000 rpm Voltage: 220 VAC Nominal current: A (ohmic load) FW 00/2 KS Page
Pressure switches for gas and air Pressure sensors plates pressure typeplate All the information is indicated on the pressure switch setting wheel. The setting wheel for gas pressure switches is always yellow. s: GW...A2, GW...A4, GW...A, GW A6, ÜB A2, ÜB A4, NB A2, NB A4 3 4 2 6 7 mbar GW 0 A2 Range,0-0 mbar p mbar max. ID-No.: CE-008 AP 070 8 0 9 Set switching pressure Version Setting range pressure CE-number plate for differential pressure switches for gases and/or air The setting wheel for gas pressure switches is yellow. It is always blue for differential pressure switches for air. s: LGW, LGW...A2, LGW...A2P, LGW...A4, LGW...C2, KS C2 0,9,2, 0,6,8 0,4 2, mbar Set switching pressure LGW 3 A2 Version p max. mbar ~(AC) 0 A 20 V Setting range CE-008 AQ 0673 2,4 2,7 3 CE-number Differential pressure switches for air, flue and exhaust gases The LGW...A differential pressure switch is only manufactured to customer-specific switching values. Each differential pressure switch therefore has an individual typeplate. The typeplate is affixed to the equipment. Switching pressure max. operating pressure Adjusted as pressure falls LGW 3 A,2 mbar p pmax. 0 mbar ID-Nr. CE-008 AQ 0673 CE-number Installation position We reserve the right to make any changes in the interest of technical progress. Head Offices and Factory Karl Dungs GmbH & Co. Siemensstraße 6-0 D-73660 Urbach, Germany Telephone +49 (0)78-804-0 Page 2 Telefax +49 (0)78-804-66 Postal address Karl Dungs GmbH & Co. Postfach 2 29 D-73602 Schorndorf, Germany e-mail info@dungs.com Internet www.dungs.com