Approvals and Capabilities Listing HTL-0009 Rev O 6.22.2016 All approvals are subject to change and may not be for all materials. Some of these processes may have limitations for specific processing information. Please direct approval inquiries to the Hytek Quality Department. Legend: (S/S): superseded by (*): Limited approvals Doc. # Document Title OEM 207-10-408 Solid Film Lubrication 207-9-470 207-9-474 Fluid Resistant, Epoxy-Polyamide Exterior Primer Material Specification for Epoxy Primer Coating 208-10-10 Solid Film Lubrication 208-13-40 Peening, Shot and Glass Bead 208-14-13 Process Specification for Penetrant Inspection 208-4-2 Process Specification for Surface Preparation of Titanium, Phosphate-Fluoride Method 208-4-5 Process Specification for Processing of Titanium Alloys 208-9-100 Process Specification for Aluminum and Aluminum Alloys, Cleaning and Etching of 208-9-143 Application of Fluid Resistant, Epoxy- Polyamide, Exterior Primer 208-9-145 Epoxy Topcoat 208-9-146 Aqueous Degreasing 208-9-147 Epoxy Primer Coating 208-9-149 Abrasion Resistant Coating 208-9-64 Chemical Film (Colored for Aluminum Alloys) 208-9-89 Integral fuel Tank Coating 5PTPHB26 5PTPTT02 Sol-Gel Surface Treatment for Painting Titanium Fracture/Durability Critical Parts, General Specification for Control of
Chromic Acid Anodising ( Includes Machine ABP1-1023 Airbus Abuse ) Shot Peening for Improved Fatigue and Stress ABP1-2028 Airbus Corrosion Resistance ABP1-2344 Cleaning and Surface improvement Blasting Airbus ABP1-3038 Deposition of Zinc By Spraying Airbus ABP1-5057 Conversion Coating Of Aluminum Airbus ABP4-1123 Application of Epoxy Primer to an Internal or External Surface Airbus ABP4-2124 Application of Abrasion Resistant Paints Airbus ABP4-2130 ABP4-2133 Application of Flexible Finish Paints to an Internal Surface Application of Erosion resistant Paint Airbus Airbus ABP4-2364 Application of Primer & Topcoat Airbus ABP4-4140 Stripping of Paints by Chemical Methods Airbus ABP5-1351 Surface Preparation Prior to Application of Paints Airbus ABP6-5230 Testing By Penetrant Flaw Detection Airbus ABP8-1290 Cleaning and Degreasing of Metallic Materials Airbus ABP8-1294 Cleaning & Degreasing of Metallic Materials Airbus ABP8-1296 Deoxidation of Aluminum Alloys Airbus ABP8-2297 Pickling of Aluminum Alloys as a Pre- Treatment Airbus ABP8-2299 Pickling of Titanium Alloys Airbus ACS-PRS-2203 Cleaning, Surface Treatments and Inorganic Coatings for Metallic Surfaces Northrop Grumman ACS-PRS-3251 Application and Control of Finishes, Organic Northrop Grumman ACS-PRS-7005 Penetrant Inspection Northrop Grumman ACS-PRS-7051 Process Specification for Nondestructive Testing Personnel Qualification & Certification Northrop Grumman ACS-PRS-8003 Packaging, Handling and Storage of Critical Parts Northrop Grumman AIMS04-04-038 Corrosion Inhibiting Primer Airbus AIMS04-04-043 Corrosion Inhibiting Primer Airbus AIPS02-04-006 Zinc Nickel Airbus AIPS02-05-005* Passivation of Corrosion Resistant Steel Airbus AIPS09-02-005* Pickling of Titanium and its alloys Airbus AITM6-1001 Penetrant Inspection Airbus
AMS- M-3171 Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on AMS12 Material Specification paint / primer AIM Aviation AMS2404 Electroless Nickel Plating Commercial work only. No OEM approvals AMS2417* Zinc Nickel limited AMS2419 Plating, Cadmium-Titanium MOOG AMS2430 Shot Peening AMS2460 Chromium Plating ( Electrodeposited ) AMS2486 Conversion Coating of Titanium Alloys; Fluoride-Phosphate Type AMS2700 Passivation of Corrosion Resistant Steels AMS2759* Heat Treatment of Steel Parts (Stress Relief Only) AMS-C-26074 Coatings, Electroless Nickel, Requirements AMS-C-27725 Coating, Corrosion Preventative, Polyurethane for Aircraft Integral Fuel Tanks AMS-C-83231 Coatings, Polyurethane, Rain Erosion plastics parts AMS-QQ-C-320 Chromium Plating ( Electrodeposited ) S/S AMS2460 AMS-QQ-P-35 Passivation Treatments for CRES S/S AMS2700 AMS-QQ-P-416 Plating, Cadmium (Electrodeposited) APS06 Surface Preparation AIM Aviation APS09 Primer and Paint Application AIM Aviation APS1011 Etch Inspection of ground or Machined Steel Parts Aerostar Engineering APS42-0 Chromate Conversion Coating S/S SPG-MPS- 006 B/E Aerospace AS5272 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting AS87132 Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners ASTM-A-380 Standard Practice Cleaning, Descaling, & Passivation of Stainless Steel Parts, ASTM-A-967 Chemical Passivation Treatments for Stainless Steel Parts ASTM-B-117 Operating Salt Spray ( Fog ) Apparatus ASTM-B-600 Descaling and Cleaning Titanium and Titanium Alloy Surfaces ASTM-D-1732 Preparation of Magnesium Alloy Surfaces for Painting ASTM-D-3698 Solvent Vapor Degreasing ASTM-E-1417 Standard Practice for Liquid Penetrant Examination
Standard Practice for Magnetic Particle ASTM-E-1444 Inspection Paint Type Coatings, Application and Removal AUPS7.04 of BAC5019 Chromic Acid Anodizing BAC5022 BAC5034-1 BAC5308 BAC5322 BAC5325 BAC5338 BAC5408 BAC5423 Sulfuric Acid Anodic Films Temporary Protection of Production Materials, Parts, and Assemblies with Coatings Application Of Stencil And Insignia Markings Preparing Interior Plastic Surfaces for Paint Application of BMS10-103 Nonchromated Primer for Composites Acid Etch and Electrochemical Etch Marking Vapor Degrease Penetrant Methods Of Inspection BAC5424 Magnetic Particle Inspection BAC5436 Etch Inspection of Ground or Machined Steel Parts BAC5609 DOW 7 Treatment of Magnesium Alloys BAC5617 Heat Treatment of Alloys Steels * Stress & Embrittlement Only BAC5619 Heat Treatment of Corrosion Resistant Steel Stress & Embrittlement Only BAC5625 Surface Treatment for Ferrous Alloys BAC5626 BAC5629 Colored Chemical Conversion Coatings for Aluminum Application of Urethane Exterior Coatings BAC5632 Boric Acid - Sulfuric Acid Anodizing BAC5639 Application of Anti-Static Coatings BAC5640 Nitriding of Steel *Stress Relieve Only BAC5641 BAC5663 BAC5665 BAC5701 BAC5705 BAC5706 BAC5709 Carburizing of Carbon and Alloy Steels *Stress Relieve Only Sol-Gel Conversion Coatings for Aluminum Alloys Application of Sol-gel Conversion Coating on Corrosion Resistant Steels Cadmium Plating Application of Floor Covering Materials Application of Organic Finishes Hard Chromium Plating
BAC5710 Application of Special Purpose Coatings BAC5716 Preparation of Colored Anodic Films BAC5722 BAC5725 BAC5728 BAC5730 BAC5734 BAC5736 BAC5738 BAC5742 Copper Plating Stripping Organic Materials Electroless Nickel Plating Shot Peening Anodizing of Magnesium Alloys Application of Chemical & Solvent Resistant Finishes Application of Skydrol Resistant Finishes to Magnesium Drums and Quadrants Surface Treatments for Magnesium BAC5746 Nickel Plating ( Strike Only ) BAC5748 BAC5749 BAC5751 BAC5753 BAC5755 BAC5758 BAC5759 BAC5763 BAC5765 BAC5767 BAC5769 BAC5770 BAC5771 BAC5774 BAC5775 BAC5777 Abrasive Cleaning, Deburring, and Finishing Alkaline Cleaning Cleaning, Descaling and Surface Preparation of Ferrous Alloys Cleaning, Descaling and Surface Preparation of Titanium and Titanium Alloys Application Of Interior Decorative Finishes Cleaning, Descaling and Surface Preparation of Nickel and Cobalt Base Alloys Chemical Milling of Steel, Nickel, and Cobalt Alloys ( F22 Only) Emulsion Cleaning And Aqueous Degreasing Cleaning And Deoxidizing Aluminum Alloys Thermal and Rain Erosion Resistant Systems Cleaning, Descaling and Surface Preparation of Magnesium Alloys Cleaning, Descaling and Surface Preparation of Copper Alloys Stripping Inorganic Finishes Alkyd Primers, Application of Coating, Synthetic Enamel Wash Primer, Application of BAC5786 Etch Cleaning of Aluminum Alloys BAC5793 Application of Corrosion Resistant Finish for Integral Fuel Tanks
BAC5797 BAC5800 BAC5804 BAC5807 Coating Systems, For Corrosion Prone Areas, Application of Application of Metallic Pigmented Primers Low Hydrogen Embrittlement Cadmium- Titanium Alloy Plating Application of High Temperature Epoxy Primer BAC5810 BAC5811 BAC5821 BAC5824 BAC5837 BAC5845 BAC5849 BAC5854 BAC5860 BAC5861 BAC5877 BAC5882 BAC5896 BAC5951 Phosphate Conversion Coating on Steel Dry Abrasive Blasting Hard Anodizing Application of Low Friction Coatings Preparing Exterior plastic surface for paint Application Of Polyurethane Enamel Brush Plating, Anodize and Electrochemical Etching(*) Low Hydrogen Embrittlement Stylus Cadmium Plating Application of Thermal Control Coatings Application of Phosphate Fluoride Coating Titanium Application of Organic Corrosion Inhibiting Compounds Application of Urethane Compatible Primer Application of Aliphatic Isocyanate Polyurethane Enamel Glass Bead Peening BAERD GEN-017 Requirements for Painting BAPS138-043 Application of Fluid Resistant ( FR) Primer BAPS138-044 Application of Fluid Resistant ( FR ) Enamels BAPS138-049 Application of BAMS565-013 Heat Resistant Coatings BAPS138-6 Application of Teflon Filled Coating BAPS160-020 Chemical Conversion Coating Treatment of Aluminum BAPS168-006 Baking of Steel for Relief of Hydrogen Embrittlement BAPS176-002 (*) Fluorescent Penetrant Inspection BAPS176-004 Magnetic Particle Inspection BAPS180-008 Dry Abrasive Blasting BAPS180-015 Passivation of Corrosion Resistant Steel
BAPS180-029 Removal of Shot Peen Residue from Aluminum Alloy and Titanium Alloy Parts BAPS180-030 Alkaline Etching of Aluminum Alloys BAPS185-002 (*) Saturation Shot Peening or Metal Parts BMS10-85 (*) Aluminum Pigmented Coating ( Not on Titanium ) BPS-0004H BE Aerospace Anodizing of Alum Alloys B&E Aerospace BPS-0004N BE Aerospace Epoxy Prime for Metals B&E Aerospace BPS-0004P BE Aerospace Passivation of Stainless Steels B&E Aerospace BPS4001 Chromic Acid Anodize Bell Helicopter BPS4003 Chemical Treatment for Magnesium Alloys Bell Helicopter BPS4006 Cadmium Plating, Electrodeposited Bell Helicopter BPS4007 Passivation Bell Helicopter BPS4075 Magnetic Particle Inspection Bell Helicopter BPS4089 Fluorescent Penetrant Inspection Bell Helicopter BPS4138 Chemical Cleaning of Aircraft Materials Bell Helicopter BPS4182 Chemical Film Treatment Bell Helicopter BPS4310 Application of Solid Film Lubricants Bell Helicopter BPS4312 Selective Brush Cadmium Plating Bell Helicopter BPS4343 Mechanical Cleaning of Metals Bell Helicopter BPS4384 Phosphatizing of Metals Bell Helicopter BPS4386 Application of Acrylic Lacquers Bell Helicopter BPS4389 Chemical Milling, Pre-Penetrant Etch of Titanium Bell Helicopter BPS4427 Epoxy Enamel, Application of Bell Helicopter BPS4441 Lacquers, Cellulose Nitrate, Application of Bell Helicopter BPS4451 Application of Epoxy Primer Bell Helicopter BPS4456 Anti-Fretting Treatments for Titanium Bell Helicopter BPS4464 Application of Polyurethane Coating Bell Helicopter BPS4481 Application of Epoxy-Zinc Coatings Bell Helicopter BR-167 Organic Finish System for E2-C Landing Gear Goodrich BS25032 Corrosion Resistant Fuel Cell Epoxy Primer Hawker Beechcraft
BS25691 Control of Product Manufacturing Processes Hawker Beechcraft BS361 Standard Finish Specification Hawker Beechcraft BSS7039 Liquid Penetrant Inspection BSS7040 Magnetic Particle Inspection CDM240-01 Coatings for Thermoplastic Materials C&D Aerospace CDP490-21 Painting, Decorative Finish On Plastic C&D Aerospace CDP495.00 Mechanical Finishes On Metallic Parts C&D Aerospace CDPS007 Fluid Resistant Primer ( F.R. Primer ) and Topcoat for Aluminum or Non-Metallic Parts C&D Aerospace CPC-6400 Shot Peening of Metal Parts Goodrich LG CPC-9108 Magnetic Particle Inspection Goodrich LG CPC-9201 Marking of Parts and Assemblies Goodrich LG CPS5426 Magnetic Particle Inspection Accept /Reject Criteria Curtiss Wright CPS5427 Fluorescent Penetrant Inspection Accept /Reject Criteria Curtiss Wright CPS6601 Etch Inspection of Ground Steel Parts S /S BAC5436 Curtiss Wright CPS6717 Application of Primer for Chemical & Solvent Resistant Surfaces (BAS) Curtiss Wright CSFS007 Organic Finishes - Solvent Base Application Cessna Mechanical Finishes For Aluminum and CSFS021 Cessna Stainless Steel Chemical Film, Chromate Conversion Coatings CSFS027 Cessna for Aluminum and Aluminum Alloys CSFS029 Chrome Plating - Electrodeposited Cessna CSFS035 Chemical Cleaning of Metals Cessna CSFS036 Aqueous Degreasing Cessna CSFS039 Solvent Cleaning-Liquid Cessna CSFS040 Paint Stripping Cessna CSFS042 Vapor Degreasing Cessna CSFS044 Alkaline Cleaning of Metals Cessna CSFS045 Etch & Deoxidizing of Aluminum Cessna CSFS070 Drylube Cessna CSFS084 Coatings, VOC Compliant, Application Cessna CSMP004 Heat Treatment and Surface Hardening of Steels Cessna
CSTI001 Magnetic Particle Inspection Cessna CSTI002 Inspection - Process Specification for Penetrant Cessna CVA1-372 Heat Treatment of Steels CVA1-6 Surface Treatment of Corrosion- and Heat- Resisting Steel Allots CVA5-149 (*) Preparation for Electroplating (Abrasive & Passivate) CVA5-5 Plating Chromium on Steels Chromic Acid Anodic Treatment of Aluminum CVA9-4 and Aluminum Alloys Coating Systems, Epoxy Polyamide, Chemical D210-12534-1 resistance D33895 Application of Coatings and Repair TRW D37522-0 Material Handling Product Packaging D37522-5 Packaging Etch Inspection of Ground or Machined Steel DCMP129 Messier Dowty Parts DCMP136 Shot Peening S/S PCS2300 Messier Dowty DCMP141 Passivation of CRES S/S AMS2400 Messier Dowty DCMP161 Inspection of Ground Chromium Plated Parts (Magnetic Particle Inspection) Messier Dowty DCMP163 Control Requirements for Fabricators of Designated Parts Messier Dowty DCMP198 Surface Cleaning of Titanium Alloy Springs S/S PCS2810 Messier Dowty DOD-P-15328 Primer (Wash), Pretreatment (Formula No. 117 for Metals) DOD-P-16232 Phosphate Coatings, Heavy, Manganese or Zinc Base S/S MIL-DTL-16232 DPS11.01 Chromic Acid Anodizing, Aluminum DPS11.04 Hard Anodizing Aluminum DPS11.05 Sulfuric Acid Anodizing DPS3.177 Solid Film Lubricants DPS4.50-109 Glazing Reinforced Plastic Laminates DPS4.50-115 Cockpit Control-Finishing DPS4.50-127 Fuel Tank Coating DPS4.50-131 Coating, Anti-Chafe DPS4.50-138 Epoxy Primer, DMS 2104 DPS4.50-144 Teflon Coating 450F Cure
DPS4.50-152 Water Base Finish DPS4.50-163 Polyurethane Coating DPS4.50-165-17 Polyurethane Caoting DMS2115 DPS4.50-168 Heat Resistant Urethane Coatings DPS4.50-169 Protective Coating-Alkaline Removable DPS4.50-3 Zinc Chromate Primer S/S DPS4.50-62 DPS4.50-36 Epoxy (FR) Coating System DPS4.50-36-17 Epoxy (FR) Coating System DPS4.50-62 Impact Resistant Coating DPS4.50-73 Seal Coatings, Reinforced Plastic Laminates DPS4.50-77 Vinyl Finish Application DPS4.704 Magnetic Particle Inspection DPS4.707 Penetrant Inspection (Fluorescent) DPS4.715 Etch Inspection of Ground or Steel Parts DPS4.747 Nondestructive Testing Procedure Approval Level III DPS4.999 Shot Peening of Metal Parts DPS5.00-1 DPS5.00-11 DPS5.00-2 DPS6-100118 DPS9.07 DPS9.28 DPS9.28-1 DPS9.29 DPS9.41 DPS9.45 DPS9.49 Steel Heat Treatment - Quench and Temper Hardenable Stress & Embrittlement Only Heat Treatment of Steel, Martensitic Stainless (Limited to stress and embrittlement baking Steel Heat Treatment - PH Stress & Embrittlement Only Penetrant Inspection Surface Treatment of CRES Special Cadmium Plating for High Strength Steels Special Cadmium Plating for High Strength Steels - Post Chromate Treated Surface Treatment of Titanium Dichromate Treatment of Magnesium Alloys Coating - Multicolored Chemical Surface Treatment of Aluminum Alloys (Immersion Photoengraving and Finishing Nameplates, etc DPS9.69 DPS9.71 Copper Plating Chromium Plating
DPS9.74 DPS9.84 Cadmium Plating Thin Dense Chromium Plate F14.11 Chromium Plate, Satin Finish Match BAC9022 F14.111 Matte Chrome Match BAC9250 F14.20 Chromium Plate, Satin Finish Match 9890 F14.22 Polish Match BAC9138 F14.221 Polish & Sulfuric Match BAC9121 F14.222 Decorative Satin Finish Match BAC9137 F14.23 Clear Coat Match BAC9026 F14.231 Buff & Clear Coat Match BAC9024 F14.25 Satin Finish & Sulfuric Match BAC901 F14.251 Satin Finish & Sulfuric Match BAC901A F14.252 Satin Finish & Sulfuric Match BAC93722 F14.26 Satin Finish & Clear Coat Match BAC9025-356 Only F14.29 Satin Finish & Sulfuric Match BAC 990 F14.292 Pink Gold, Buffed Match BAC981, 981SS F14.293 Bright Buff & Sulfuric Match BAC5051 F14.2951 Gray Anodize Match BAC7058B F14.297 Champagne Anodize, Buffed Match BAC871 F14.2972 Gold Champagne, buffed F14.2977 Satin Finish & Sulfuric Match BAC80893 F14.298 Gold Satin finish Match BAC938 F14.299 Polish & Sulfuric Match BAC9512 F14.2992 Non Directional & Sulfuric Match BAC9512 F14.2993 Satin Finish & Sulfuric Match BAC90844 F14.2994 Clear Coat Match BAC70639 F14.2999 Non Directional & Hardcoat Match BAC70639 F14.30 Abrasive & Sulfuric Match BAC93957 F14.33 Polish, Sulfuric acid anodize Match BAC 94569
F14.80 Satin Finish Match BAC906 F14.801 Sating Finish Match BAC91929 F14.82 Satin Finish Match BAC969 F14.823 Directional coarse & fine satin finish Match BAC 94582 F14.84 Satin finish Match BAC970 FPM Code 2 Fluorescent Penetrant Method (FPM)-High Sensitivity Pratt & Whitney FPM Master Non-Destructive Test Method Specification Pratt & Whitney Fluorescent Penetrant Standard-Master (FPS- FPS-M M) Pratt & Whitney FSI-PS-4010 Process Specification for Part Marking Flight Structures FSI-PS-4014 Chemical Conversion Coating for Aluminum and Aluminum Alloys Flight Structures FSI-PS-4019 Process Specification for Painting Flight Structures FSI-PS-4020 Process Specification for Cleaning of Aluminum, Steel and Cres Flight Structures FSI-PS-4021 Process Specification for Application of Epoxy Primers Flight Structures FTI-8403 Application of Bonded Dry Film Lubricants to Flying Parts Fatigue GAMPS3102 Integral Fuel Tank Coating, MIL-C-27725, Application of GAMPS3103 Primer Coating, Epoxy, Preparation and Application of GAMPS3115 Primer, Epoxy, Chlorinated Solvent, General Application GAMPS3216 Epoxy Topcoat, High Solids, Phosphate Ester, Fluid Resistance, Preparation and Application GAMPS3303 Abrasion Resistant (Anti-Chafe) GAMPS4101 Preparations of Surfaces by Abrasive Methods GAMPS4103 Acid Cleaning of Ferrous Alloys GAMPS4106 Immersion Stripping of Paint GAMPS4107 (*) Cleaning and Descaling of Titanium and Titanium Alloys Method 1 Only GAMPS6103 Brush Plating of Ferrous and Non-Ferrous Alloys GAMPS6104 Copper Electro GAMPS6113 GMS5005 GMS5006 GP111GY Chemical Conversion Coatings on Aluminum and Aluminum Alloys Epoxy Primer Coating, Water-Reducible, Low VOC, Diphosphate Ester Hydraulic Fluid Epoxy Topcoat, High-Solids, Diphosphate Ester Hydraulic Fluid Resistant Primer, Epoxy, Waterbase, Skydrol, Chemical Solvent & Solvent Resistant for Commercial
GT23A HDB-01-10-11 Test, Non-Destructive Penetrant Inspection Method Penetrant Inspection HMSD1-001 HPS-18004 HPS-18008 HPTR0126 JPS-3624 LES1103 Interior Decorative Paint Application and Control of Finishes, Organic Application of Fluid Resistant Primer Material Inspection Instruction BMS10-83 Type V Flat Interior Decorative Top Coat Painting Application of Flat Interior Topcoat Heath Tecna Heath Tecna Heath Tecna Aircelle Jamco MDP4-10 Electroless Nickel Helicopter MDP4-11 Cadmium Helicopter MDP4-13 Chrome Helicopter MDP4-2 Anodize of Aluminum Helicopter MDP4-36 Shot Peen Helicopter MDP4-57 Chem. Film Helicopter MDP4-79 Anodize Aluminum -Wear Resistance Helicopter MDP6-13 Penetrant Helicopter MDP6-5 Magnetic Particle Inspection Helicopter MDP9-5 Chemical Cleaning Methods for Metallic parts Helicopter MIL-A-63576 (*) MIL-A-8625 Types I, II, III MIL-C-26074 MIL-C-27725 MIL-C-46168 MIL-C-5541 MIL-DTL-0053030 MIL-DTL-16232 MIL-DTL-53039 MIL-DTL-53072 MIL-DTL-5541 Aluminum Oxide Coatings, Lubricative, for Aluminum and Aluminum Alloys Anodic Coatings For Aluminum and Aluminum Alloys Coatings, Electroless Nickel, Requirements for S/S AMS-C-26074 Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks S/S AMS-C-27725 Coating, Aliphatic Polyurethane, Chemical- Agent-Resistant, Application of S/S MIL-DTL- Chemical Conversion Coatings on Aluminum & Aluminum Alloys; Type 1A & 3 S/S MIL-DTL- Primer Coating, Epoxy, Water Reducible, Lead and Chromate Free Phosphate Coating, Heavy, Manganese or Zinc Base Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant Chemical Agent Resistant Coatings, Application Procedures Chemical Conversion Coatings on Aluminum and Aluminum Alloys
MIL-F-18264 Finishes: Organic, Weapons System, Application and Control of MIL-H-6875 Heat Treatment of Steel Raw Materials, Stress Relief Only S/S AMS-H-6875 MIL-I-6868 Inspection Process, Magnetic Particle S/S MIL- STD-1949 MIL-L-23398 Lubricant, Solid Film, Air Cured, Corrosion Inhibiting MIL-L-87132 Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners S/S AS87132 MIL-M-3171 Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on S/S SAE-AMS- MIL-M-45202 Magnesium Alloys, Anodic Treatment of S/S ASTM-D-1732 MIL-PRF-24667 Coating System, Non-Skid, for Roll or Spray Application MIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting TYPE 3 ONLY MIL-PRF-81352 Coating, Aircraft Touch-up MIL-S-5002 Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems MIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement Electrodeposition MIL-STD-1504 Abrasive Blast MIL-STD-1949 Magnetic Particle Inspection (100a) S/S ASTM- E-1444 MIL-STD-6866 Inspection, Liquid Penetrant (110A) S/S ASTM-E-1417 MIL-STD-865 Selective (Brush Plating) Electrodeposition MIL-STD-867 Temper Etch Inspection MIL-STD-870 Cadmium Plating, Low Embrittlement, Electrodeposited MIS-20007 Painting Process and Inspection Requirements for Missile and Ground Support Equipment Missile Command MIS-35790 Coating, Aliphatic Polyurethane, Chemical- Agent-Resistant, Application of Missile Command MMC137 Shot Peening Goodrich LG MPM-51-003 Chemical Processing of Titanium Alloy Parts Microsurgical MPS-0206 (*) Glass Bead Blasting of the SSRCS C-103 Chamber and Chamber-Nozzle Assemblies Aerojet MPS-0212 (*) Cleaning of Inconel X750 Springs Aerojet MPS-0903 (*) Penetrant Inspection Aerojet MPS138-33 MPS160-8 MPS168-6 MPS176-14 (*) General Requirements for Painting S/S BAERD GEN-017 Cadmium Plating of Steels Heat Treated to Less than 220 KSI and Copper Alloys Baking of Steel for Relief of Hydrogen Embrittlement S/S BAPS168-006 Nital Etch Inspection of Steel Parts BAPS176-014
MPS176-4 Magnetic Particle Inspection S/S BPS176-4 / BAPS176-004 MPS180-1 (*) Alkaline Cleaning MPS180-15 Passivation of Corrosion Resistant Steel MPS180-29 Removal of Shot Peen Residue from Aluminum Alloy and Titanium Alloy Parts MPS180-30 Alkaline Etching of Aluminum Alloys MPS180-6 Stripping Paint Finishes MPS180-8 Dry Abrasive Blasting MPS250-301 Penetrant Inspection NAS4006 (*) Aluminum Pigmented Coating NDTSPM08-00-00 Non-Destructive Test method Specification MRO NE40-016 Anodic Coatings in Sulfuric Acid Embraer NTR PS 1101 Non Chromated Corrosion Inhibiting Primer Coating Application Nordam P.SPEC.300 Fluorescent Penetrant Inspection P.SPEC.407 Chemical and Electro-Chemical Treatment for Metal Parts P.SPEC.419 Application of Chemical Conversion Coatings for Aluminum Alloys P.SPEC.420 Heat Treatment of Titanium and Titanium Alloys ( Stress Only ) P.SPEC.910 Priming Aircraft Detail Parts, Components and Structures P5-54 Application of Weather /Fluid Resistant Polyurethane Finishes Euless Aero. Components PCS2300 Steel Shot peening Messier Dowty PCS2501 Polyurethane Pain Scheme for Application to Airbus Messier Dowty PCS2530 Paint Instructions Messier Dowty PCS2810 Surface Cleaning of Titanium Alloy Springs Messier Dowty PCS-3100(*) Magnetic Particle Inspection Messier Dowty PCS3600 Etch inspection of high strength steel parts Messier Dowty PF80-241 Surface Preparation for Electrical Bonding Embraer PPS17.02 Abrasive Blasting PPS17.03 Saturation Shot Peening PPS20.01 Magnetic Particle Inspection PPS20.03 Fluorescent Penetrant Inspection
PPS30.04 (*) PPS30.08 Steel Heat Treatment- Carbon and Low Alloy Steels Heat Treatment of Martensitic Stainless Steels PPS31.02 Cleaning Processes for Aluminum and Aluminum Alloys PPS31.03 Cleaning of Carbon and Low Alloy Steels PPS31.04 Degreasing Processes PPS31.05 Surface Treatment of CRES PPS31.07 Cleaning and Stripping of Painted Surfaces PPS32.01 (*) Chemical Conversion Coating of Aluminum and Titanium Alloys by Immersion. Colored PPS32.02 Manual Application of Chemical Conversion Coatings PPS34.08 Application of Epoxy-Polyamide Primer PPS-T-0503 Liquid Penetrant Inspection Process Specification - Chemical Conversion PS1001 Coating Quest PS1002 Anodic Coatings Quest PS12024 PS12030 PS12040 PS12050.1 PS12050.6 Cleaning, Aqueous Immersion Degreasing Cleaning, Alkaline Cleaning, Abrasive Pickling Aluminum Alloys Pickling Titanium Alloys,,,,, PS123 Steel Shot Peening S/S AMS2430 Renton Coil Spring PS13201 PS13204 PS13305 PS13375 PS13525 PS13525 PS13630 PS13646 PS190.2 Anodizing Aluminum Alloys, Conversion Coating, Brush and Spray, Preparation and Application of Lacquer (A-A- 3165), Application of Epoxy Primer, Polyurethane Corrosion Resistant Coating, Spray Application of, Polyurethane Corrosion Resistant Coating, Spray Application of Corrosion Prevention and Protective Finishes; Painting of F/A-18 and AV-8 Aircraft, Corrosion Prevention and Protective Finishes; Painting of F-15 Aircraft, Chemical Treatment of Magnesium Alloys PS2003 Topcoat Application Quest
PS2017 Application of Organic Finishes Quest PS2026 Passivation of Corrosion Resistant Steel Parts Quest PS205.1 PS205.12 Epoxy Paints and Fillers Application of Polyurethane Finishes PS210100 Hand Wipe and Immersion Cleaning Methods Israel Air PS210200 Vapor Degreasing Israel Air PS210200 Vapor Degreasing Israel Air PS211600 Cleaning of Aluminum Alloys Israel Air PS212000 Stripping of Organic Paint Israel Air PS21201 Magnetic Particle Inspection PS21202 Penetrant Inspection PS220900 Abrasive Cleaning, Dry Method Israel Air PS23001 Acceptance Procedure for Airframe Castings PS23001 Acceptance Procedure for Airframe Castings PS231120 Chromic Acid Anodize Israel Air PS233200 Chemical Conversion Coatings for Aluminum Israel Air PS243500 Application of epoxy primer Israel Air PS243701 Application of High Gloss, High Solids Polyurethane Coating Israel Air PS243900 Application of Fluid Resistance Epoxy Primer Israel Air PS247900 PS249150 PS30.2 PS30.5 PS30.6 Application of Abrasion Resistant Paint, Anti- Chafe Coating Israel Air Polyurethane Corrosion Preventive Coating for Israel Air Aircraft Integral Fuel Chemical Conversion Coating for Aluminum Application of Zinc Chromate Primer S/S PS30.6 Application of Polyurethane Primer PS30.8 Application of Primer Coatings Process specification of discontinuities in PS300.017 Magnetic Particle Inspection PS810100 Liquid Penetrant Inspection Israel Air PS-98006000 Chemical Coating of Aluminum Surfaces Embraer PWA 36603 Aqueous Degreasing of Parts and Assemblies Pratt & Whitney
PWA-36545 Anti-Gallant Compound and Treatment Pratt & Whitney QQ-C-320 Chromium Plating (Electrodeposited) S/S AMS- QQ-C-320 QQ-P-35 Passivation Treatments for Corrosion- Resistant Steel S/S AMS-QQ-P-35 / AMS2700 QQ-P-416 (*) Plating, Cadmium (Electrodeposited) S/S AMS- QQ-P-416 RPS13.31 Cyanide Cadmium Plating Goodrich Aerostructures RPS13.52 Brush Application of Chemical Conversion Coatings to Aluminum Alloys Goodrich Aerostructures RPS13.55 Sulfuric Acid Anodize for Aluminum Alloys Goodrich Aerostructures RPS13.81 Application of Dry Film Lubricants Goodrich Aerostructures RPS13.83 Application of Abrasion Resistant Finishes Goodrich Aerostructures RPS13.84 Application of Heat Resistant Urethane Primer Goodrich Aerostructures RPS13.97 Application of Organic Finishes and Dissimilar Metal Protection Goodrich Aerostructures RPS13.97-12 Application of Organic Finishes on 737-NG Grid Lock Spoiler Goodrich Aerostructures RPS13.97-14 Application of Organic Finishes for 787 Goodrich Aerostructures Nacelle Program RPS13.97-7 Application of Chemical and Solvent Resistant Goodrich Aerostructures Finishes for F-15 Flight Control Surfaces RPS13.99 Parts Marking and Identification Goodrich Aerostructures RPS15.00 Surface Preparation of Heat and CRES Goodrich Aerostructures RPS15.06 Stripping Process for Organic Finishes Goodrich Aerostructures RPS15.45 Surface Preparation of Commercially Pure Titanium and Titanium Alloys Goodrich Aerostructures RPS15.51 Abrasive Blast Cleaning Goodrich Aerostructures RPS15.52 Cleaning of Aluminum Goodrich Aerostructures RPS15.53 Aqueous Degreasing Goodrich Aerostructures RPS18.08 Magnetic Particle Inspection Goodrich Aerostructures Magnetic Particle inspection for the C-5 RERP RPS18.08-1 Goodrich Aerostructures Pylon RPS18.10 (*) Penetrant Inspection T1 MA & T1 MB Goodrich Aerostructures RPS18.16 Penetrant Inspection of Grid Lock Parts Goodrich Aerostructures S213065 Pre-penetrant Etching of Machined Aluminum S-62 Protective Coating SCGPS10007 SMS111204 Penetrant Inspection of Spacecraft Materials and Structures Urethane Compatible Corrosion Resistant Primer Spirit
SOPM20-10-01 Repair and Refinish of High Strength Steel Parts MRO SOPM20-10-02 Machining of Alloy Steel MRO SOPM20-10-03 Shot Peening MRO SOPM20-10-10 Shotpeen MRO SOPM20-20-01 Magnetic Particle Inspection MRO SOPM20-20-02 Penetrant Methods of inspection MRO SOPM20-30-02 Stripping of Protective Finishes MRO SOPM20-30-03 General Cleaning Procedures MRO SOPM20-41-01 Decoding Table for Finish Codes MRO SOPM20-42-01 Low Hydrogen Embrittlement Cadmium Plating SOPM SOPM20-42-02 Low Hydrogen Embrittlement Cadmium- Titanium Alloy Plating MRO SOPM20-42-03 Hard Chrome Plating MRO SOPM20-42-05 Bright Cadmium Plating MRO Low Hydrogen Embrittlement Stylus Cadmium SOPM20-42-10 MRO Plating SOPM20-43-01 Chromic Acid Anodising MRO SOPM20-43-03 Chemical Conversion Coating for Aluminum MRO SOPM20-44-01 Application of Special Purpose Coatings MRO SOPM20-50-08 Application of Bonded Solid Film Lubricants MRO SOPM20-60-02 Finishing Materials MRO SOPM57-53-35 Outboard Flap Carriage Assembly MRO SOPM57-53-36 Outboard Flap Carriage Assembly MRO Chemical Conversion Coating of Aluminum SPG-MPS-006 B/E Aerospace Alloys Temporary Protection of Production Materials, SPS-100340 Spirit Parts, and Assemblies SPS-104080 Vapor Degreasing Spirit SPS-104230 Penetrant Inspection Spirit SPS-104240 Magnetic Particle Inspection Spirit SPS-107100 Application of Special Purpose Coatings Spirit SPS-107250 Stripping of Coatings Spirit SPS-107360 Application of Chemical and Solvent Resistant Finishes Spirit
SPS-107440 Manual Alkaline Cleaning, Solvent Emulsion, and Foam Cleaners Spirit SPS-107480 Abrasive Cleaning, Deburring, and Finishing Spirit SPS-107490 Alkaline Cleaning Spirit SPS-107500 Solvent Cleaning Spirit SPS-107630 Emulsion Cleaning and Aqueous Degreasing Spirit SPS-107650 Cleaning and Deoxidizing of Aluminum Alloys Spirit SPS-107860 Etch Cleaning of Aluminum Alloys Spirit SPS-108610 SS8407 SS8435 SS8448 SS8483 (*) SS8550 SS8693 SS8805 SS8806 SS8866 STM0805 Application of Phosphate Fluoride and other Conversion Coating for Titanium Stress Relief and Embrittlement Relief Baking and Testing of Steel Parts Type II Class 2 Passivation of Corrosion Resistant Steel Plating, Cadmium (Electrodeposited) Anodic Coating for Aluminum and Aluminum Alloys Type 1, 1C & Type 2, 2B ONLY Coating, Teflon Application of Brush Coating and Touch Up of Aluminum and Aluminum Alloy Surface Treatments Inspection Process, Magnetic Particle Inspection, Liquid Penetrant Lubricant Solid Film Application of Enamel, Polyurethane, High Solids Spirit Sikorsky Sikorsky Sikorsky Sikorsky Sikorsky Sikorsky Sikorsky Sikorsky Sikorsky STM0876 Primer, Epoxy, Corrosion Inhibiting Cryogenic, STP0176 Titanium Alloys, Surface Treatment, STPG-30063 Chemical Films for Aluminum and Aluminum Alloys Middle River STPG-30112 Coating, Anodic, for Aluminum and Aluminum Alloys Middle River STPG-50036 Cleaning, Alkaline, Non-Etch STPG-50042 STPG-50047 Cleaning, Descaling, and Passivation of Corrosion and Heat Resistant Steels and Abrasive Cleaning Middle River STPG-73034 Passivation of Stainless Steel STPG-73058 STPG-73061 STPM73058 Application of Epoxy Resin Primers (Finishing) Application of Extreme Environment Dry Film Lubricant Process specification for painting composite and metal parts and assemblies Middle River Middle River
TEIS1017 TM1109 TMS12 TPS06 TPS09 TT-C-490 VPS20.03* VPS31.07 VPS32.01 VPS33.01 VPS33.02 Magnetic Particle Inspection - Stud, Bolts, Levers, Pins, Rollers Marking of Parts and Assemblies for Identification and Inspection F-22 Aircraft Primer and Paint Surface Preparation Primer and Paint Application Cleaning Methods for Ferrous Surfaces and Pretreatments for Organic Coatings Flourecent Penetrant Inspection Cleaning and Stripping of Painted Surfaces Chemical Conversion of Aluminum and Titanium Alloys Cadmium Plating Removal of Metallic Coatings Goodrich TTF-Aircraft TTF-Aircraft TTF-Aircraft Federal Viking Viking Viking Viking Viking VPS34.08 Application of Epoxy-Polyamide Primer Viking Dry Film Lubricant (Molybdenum Disulfide), VSS10300 Application of VSS19200 Nital Etching of Low Alloy Steel Parts VSS4308 Primer Coating, Epoxy Preparation and Application of (Finish Code 2012 and 3012) VSS4510 Coating, Urethane, Aliphatic Isocyanate (MIL-C- 83286), Application of VSS7021 Acid Cleaning of Ferrous Alloys VSS8250 Chromium Plating on Steel