Optical Measuring Profile Projector PH-3500 Catalog No. E4155-172
Mitutoyo introduces the PH-3515F a series of profile projectors that will meet any optical measuring or inspection challenge your shop can offer! FEATURES Heavy-duty, bench-top model with horizontal optical system. Erect image on Day-bright screen. 356mm (14") dia. protractor screen with crosshairs and staggered lines for easy alignment. Digital angle measurement to 1' or 0.01. Floating-type workstage incorporates linear scales for fast, accurate measurement. Built-in XY counter. Contour illumination with halogen bulb. Surface illumination with halogen bulb. Suitable for thread pitch measurements free from blurred or distorted images when the workpiece is angled. Wide range of accessories for varied applications. 2
PROJECTION LENSES 5X Max. workpiece width L 10X (Standard accessory) Working distance W 20X 50X D Max. workpiece diameter whose edge line can be focused on the screen center Magnification 5X 10X 20X 50X Order No. 172-145 172-184 172-173 172-165 View field diameter 71.2 35.6 17.8 7.12 W 160 (64) 93 (41) 40 (40) 14.6 (14.6) L 175 235 235 80 D 152.4 152.4 116 30.4 ( ): When using surface illumination WORKSTAGE (STANDARD ACCESSORY) QM-Data200 (OPTIONAL) 264-141 To denote your AC line receptacle/cable add the following suffixes (e.g. 264-140A). A for UL/CSA type, C for JAPAN type, D for CEE type, E for BS type, K for EK (South Korea) type, DC for CCC (China) type. Mitutoyo launches a new 2D data processing unit for optical instruments. The QM-Data200 can add new features of 2D coordinate measurement, image processing, etc. into your ordinary optical instruments to improve the QC control system. XY range X-axis (horizontal travel): 254mm (10") Y-axis (vertical travel): 152mm (6") Measuring unit Linear scale for each axis Display unit (Optional) Stage size (WxD) 450x146mm (17.72"x5.75") Swivel range ±10 (30' reading) Max. workpiece load 45kg (99 lbs.) Dovetail groove Two (Pitch= 43mm) Focusing travel 50mm (2") Optoeye 12AAE672 332-151 3
SYSTEM DIAGRAM 172-286 172-001 172-002 172-133 QM-Data 200 Optoeye 172-145 264-141 332-151 Attachment (B) 12AAE672 172-173 172-165 932105 172-166 172-116 172-117 172-143 172-142 172-144 172-234 172-132 172-118 172-119 172-161 172-162 SPECIFICATIONS Model PH-3515F Type mm inch/mm Order No. 172-847 172-857 Resolution 0.001mm.001"/0.001mm Projection lens 10X (172-184) Magnification accuracy ±0.1% under contour illumination, ±0.15% under surface illumination Protractor Effective DIA 353mm (13.9") screen Screen material Fine-grain ground glass Reference line Staggered crosses and crosshairs Display range ±370 Resolution 1'/0.01 switchable Functions ABS/INC mode switch, zero-setting Contour Light source Halogen bulb (24V, 150W) illumination Optical system Telecentric Functions 2-step brightness switching, cooling fan, heat-absorbing filter, green filter (optional) Surface Light source Halogen bulb (24V, 150W) illumination Functions Adjustable condenser lens ( for all magnifications), cooling fan, heat-absorbing filter Power supply 100/110/120/220/240V AC (switchable), 50/60Hz Mass 155kg (341 lbs.) Standard accessories 10X projection lens set, workstage (319-227-1), power cord, halogen bulb 24V 150W (2pcs.), machine cover (383228), user's manual * To denote your AC line voltage add the following suffixes (e.g.178-847a). A for 120V, C for 110V, D for 220V, E for 240V, K for 220V(for Korea), DC for 220V (for China) 4
DIMENSIONS 460 (18.1") Unit: mm (inch) 110 (4.3) 935 (36.8") 1155 (45.5") 18 (0.7") 424 (16.7") 321 (12.6") 540 (21.3") 460 (18.1") 906 (35.7") 1138 (44.8") OPTIONAL ACCESSORIES Vertical Holder Rotary Vise Center Support Riser Center Support 172-132 Sets up a thin workpiece easily. V-block with Clamp 172-234 Workpiece dia.: 50mm max. Workpiece dia.: 60mm max. Green Filter 172-144 172-286 Increases the screen sharpness of the contour image. 172-143 Widens the clamping capacity of the center support to a maximum diameter of 240mm. Standard Scales Used for checking magnifying accuracy. 172-142 Clamps a cylindrical workpiece such as a screw. Workpiece dia.: 120mm max. 172-116 (50mm) 172-117 (2") Overlay Chart Set 932105 Makes inspection of projected images easy. Twelve different patterns are available in a set. Reading Scales 172-118 (200mm) 172-161 (300mm) Designed for checking the magnified image of a standard scale. 172-119 (8") 172-162 (12") 5
42.000505 (6) AeNE, Printed in Japan Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.