Large-scale Power Plants. taking your energy projects to the next level



Similar documents
Energy Efficiency Indicators for Public Electricity Production from Fossil Fuels

Technologies for small scale Biomass CHP-Plants an actual survey

Developments and trends shaping the future for Waste-to- Energy technology suppliers

New power plant on the Maasvlakte. Clean, reliable, and affordable energy from coal and biomass. Benelux

ESBI Carbon Solutions. Partnering with Countries to Achieve their Full Carbon Credit Potential

Weiss A/S Presentation. by Bo Johansen

ESBI Company Profile. ESB International. Bringing Energy Innovation to the World...

Nordic Baltic Bioenergy Conference, Riga April 2015

District Heating & Cooling in Helsinki

DANISH DISTRICT ENERGY PLANNING EXPERIENCE

Waste-to-Energy in Europe

of 11,000 households Steam temperature, boiler 400 C Steam pressure, boiler Incineration temperature 1,100 C

Smart Energy Systems Energy Efficient Buildings and the Design of future Sustainable Energy Systems

Role of Northern European forestry in the energy production chain, case Fortum. Jari Nylén Purchasing Manager Fortum Power and Heat Oy, HEAT

ENERGY EFFICIENCY IN POWER PLANTS

Good Practice Form

Steam Power Plants as Partners for Renewable Energy Systems

Biogas. creating the future

BIOMASS RESEARCH at ECN. Bram van der Drift

Integrating renewable energy sources and thermal storage

High-performance steam boiler and hot water boiler plants for industry

Environmental Achievements Volvo Trucks North America New River Valley Plant Dublin, VA

Impacts of large-scale solar and wind power production on the balance of the Swedish power system

ACCELERATING GREEN ENERGY TOWARDS The Danish Energy Agreement of March 2012

Waste-to-Energy. Ella Stengler Managing Director CEWEP. presentation of the Third Report on WtE plants in Italy by Federambiente and ENEA

New Bio Solutions. DONG Energy. Pyroneer November May 2013

Making Coal Use Compatible with Measures to Counter Global Warming

Smart solutions for fleets of all types & sizes of power generation. Marcus König, E F IE SGS / September 2013

Recycling and Waste-to-Energy in an era of implementation of the circular economy

JASE-world Waste to Energy Sub WG Masanori Tsukahara Hitachi Zosen Corporation

Outlook on Integrated Gasification Combined Cycle (IGCC) Technology

SEATTLE STEAM COMPANY FREQUENTLY ASKED QUESTIONS

Low-Temperature District Heating System. for Low-Energy Buildings

Bioenergy. A sustainable energy source.

From forest to gas in the transmission system. Ulf Molén,

SHAIYO TRIPLE A GROUP. Hochiminh City, 16 September 2013

Cofiring of biomass in coal-fired power plants European experience Dr Colin Henderson IEA Clean Coal Centre

From today s systems to the future renewable energy systems. Iva Ridjan US-DK summer school AAU Copenhagen 17 August 2015

February 9, 2011 Peter Kling, ÅF Consult Ltd Vice President, Bio and WtE Consulting

Clean coal from a Vattenfall perspective

Experience with co-combustion of biomass and waste in coal-fired power plants

Systematic implementation of CHP plants in Frankfurt am Main

Savonia University of Applied Sciences

Energy Efficiency and Renewable Energy Sources in Sweden

COFELY DISTRICT ENERGY DELIVERING LOW CARBON SUSTAINABLE ENERGY SOLUTIONS

ASME QRO Certification Program

Fact Sheet on China s energy sector and Danish solutions

Layout Planning of Waste-to-Energy Plants

Waste a source of energy. Regional Solid Waste Management Plan Review: Engaging solutions for tomorrow. Incineration. Incineration

INTEGRATED WASTE MANAGEMENT SERVICES

Analysis instrumentation EI&C engineering and automation Technical diagnostics. Services FROM THE professionals

Projected Costs of Generating Electricity

A Weissenbach AUSTRIA Tel. +43/2672/890-0, Fax: Internet: office@polytechnik.at

CHP Plant based on a Hybrid Biomass and Solar System of the Next Generation EU project No. ENER/FP7/249800/"SUNSTORE 4" Dipl.-Ing. Alfred Hammerschmid

CONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2

Waste to Energy in Düsseldorf. for a clean city.

Environmentally sound technologies in Poland market overview and business opportunities for SMEs

This is a Master s degree level apprenticeship which includes academic learning combined workplace learning and training.

Switch from gas to biomass in district heating Case Jelgava, Latvia. Kristian Rehnström, 25 February 2015

NAWARO BioEnergie AG: a short introduction into our business for BiG>East: Biogas for Eastern Europe

GLOBAL SPECIALTY LINES GLOBAL EXPERTISE, DELIVERED LOCALLY.

A"Local"Authority"Biomass"Supply"Chain;" experiences"in"north"lanarkshire"and" Stockport" November"2013"

Häkäpöntöstä pyrolyysikaasuttimeen Development of woodgas generator

Imtech Industry International

Preliminary pellet market country report SWEDEN

Introduction to our Business in Valmet. Marita Niemelä VP, Strategy Pulp & Energy 20 August 2014

Waste-to-Energy in Europe. Ella Stengler

Smart Cities. Smart partners in tomorrow s cities

Project Management for electrical Generation: Geothermal Energy in Combination with other Sources of Renewable Energy

DONG Energy. Biomass for heat and power experience and perspectives

Financing New Coal-Fired Power Plants

Application of the Biomass, OxyFuel, and Flameless Combustion for the utilisation of pulverised coals for electricity generation

Danish Energy Model RE Policy Tools MAIN Asian Dialog, Bali January Mr. Henrik Breum Special Advisor

Stora Enso Fors Ltd Sweden

Avoided emissions from organic waste through alternative waste treatment processes

Green Gases Practical concepts for reliable sustainable energy supply

A sustainable energy and climate policy for the environment, competitiveness and long-term stability

Statement of Carbon Neutrality 2012

Subsidising Biomass Electricity - Contracts for Difference and what they mean for dedicated and converted biomass power stations

Introduction to ESB Group

ERK Eckrohrkessel GmbH (2016) 1. Powerful First-Class Boiler and Combustion Systems & Complete Engineering Services

Use of Substitute Fuels in Large Combustion Plants (LCPs)

PRE-QUALIFICATION ANNOUNCEMENT

Electric Utilities. Introduction to the module

State of the art of solid biomass technologies in Germany

Integrated. for Steam Power Plants

POSSIBILITIES OF DH SECTOR INVESTMENTS IN POLAND

POWER & RENEWABLE ENERGY SERVICES

Heat Staying Warm. Anders Östlund Senior Vice President Heat and Waste. E.ON Capital Market Day Nordic Stockholm, July 3, 2006

CTI-Investors Forum 2007 CDM/ JI Project Porfolio

Cost Analysis of District Heating Compared to its Competing Technologies

RENEWABLE ENERGY RESOURCES PROGRAM REPORT

Transcription:

Large-scale Power Plants taking your energy projects to the next level

Grontmij and Energy Securing Stable Delivery from Source to End User Grontmij is the third largest engineering consultancy in Europe with approximately 9,000 professionals. At the heart of our business lies the sustainability by design principle. With nearly one hundred years of experience, we have developed a market-leading consultancy business serving our clients with bestin-class energy engineering and technology-based solutions. Our services are centered on economic and environmental efficiency of new or already existing facilities in order to reduce costs for the benefit of our customers and their end users. Realizing and optimizing your technical energy plants Grontmij has comprehensive knowledge and experience in consulting, planning, construction management, site supervision, and overall management. We support you in the realization and optimization of your technical energy plants. Our expertise derives from our vast experience in resolving complex challenges concerning large-scale gas- or coal-fired power plants, waste-to-energy plants, and biomass power plants throughout Europe. Working with Grontmij will provide you with a full-cycle approach to large-scale power plant projects based on solid technical know-how, high legal expertise and a well-founded knowledge of relevant business contexts.

Grontmij works with skilled professionals. We offer you expert engineers in: power engineering & machine technology process, mechanical, & piping engineering electrical & process control engineering structural engineering (building construction & civil engineering) Our clients are energy supply companies, real estate operators, dis - posers, industrial power companies, project developers, and contractors. Grontmij Germany is a member of VGB and VIK. All Grontmij offices have acquired a quality accreditation according to the ISO 9001 standards. Moreover in most of our countries we maintain an Environmental Management System according to ISO 14001 as well as a Health and Safety Protection System according to OHSAS 18001.

Maximising your Project Solutions Grontmij skills and knowledge Management Project Control & Project Management Licencing Management Project Leading Risk Management Consulting & Expert Analysis Consultancy Due Diligence Project Development Feasibility Studies Economical Analysis Environmental lmpact Studies & Expert Analysis Natura 2000 Impact Studies Engineering Preliminary Design Approval Management Basic Engineering Detailed Engineering Tendering Bid: Approval, Negotiations, & Awarding Design Review Purchase Management Site Management Organisation Construction Management Cost Management Quality Management Time Management Commissioning Training Documentation Management Operation Optimization Operation Analysis Maintenance

Economy Energy Engineering Ecology Thermodynamics Process Engineering Electrical Engineering Process Control Automation Civil Engineering Architecture Structural Engineering Static Calculation

Coal-fired Power Plants Coal-fired power plants require specialist knowledge throughout the whole planning and realisation process: Coal logistics require specialist transportation by ship, train, and truck. The complexity of handling solid fuels, additives, ashes, and other substances leads to complex process technology and high demands on engineering, tendering, contract awarding, and site management. Very high steam pressure and temperatures require special materials, specific handling and quality control. The specific emissions, inter alia CO 2, indicate professional environmental impact analyses and permitting processes. Dealing with a sensitive public in coal-fired power plant projects requires a profound knowledge in the legal demands and a sensitive handling of the monitoring process.

Coal-fired power plant, Luenen, Germany References Coal-fired power plant, Krefeld-Uerdingen, Germany Services: basic design; tendering; approval engineering & approval management; creation of approval documents; preparation of scopingpaper, creation of expert reports, environmental impact study Coal-fired power plant, Luenen, Germany Services: approval engineering & approval management, building permission application, creation of approval documents, preparation of scoping-paper and implementation of public hearing, creation of expert reports, environmental impact study; tendering coal storage; tendering operation and maintenance; engineering for district heating Coal-fired power plant, Lubmin, Germany Services: approval management Coal-fired power plant, Eemshaven, Netherlands Services: support for electrical planning, construction and infrastructure, commissioning of electrical utilities Coal-fired power plant, Emden, Germany Services: approval management Coal-fired power plant, Datteln, Germany Services: support of approval management; creation of expert reports Coal-fired Power Plants, Multi-fired Avedøre Power Station (CCGT), Avedøre, Denmark Prefeasibility Study. Financial and environmental assessment on fuel substitution (coal to biomass) at Avedøre 1 under continued coal-firing at Avedøre 2

Combined Cycle Gas and Steam Turbine Plants [CCGT] CCGT plants play an increasingly important role in world-wide energy Compared to other plants, capital costs and risks are minimized. CCGT plants offer high power density in small areas, which means decreased land use. They provide the highest electrical efficiency of all power plants and low specific CO 2 emissions. They guarantee the most flexible electrical production and a swift start-up time and load changes velocity. Thus, CCGT plants are the preferred solution to shield the electrical production of renewable energies. Despite of CCGT plants requiring smaller investments, reducing emissions, and offering more standardized solutions compared to coal-fired plants, the requirements for project management, engineering, licensing processes, or site management are still the same.

Öresundsverket, Malmö, Sweden References Öresundsverket, Malmö, Sweden Services: project management, process (boiler, steam and gas turbine, automation and electricity) QAQC, HSE management, architecture, design services and construction management, environmental impact assessment Gas and steam turbine power plant, Krefeld-Uerdingen, Germany Services: feasibility study; basic design; tendering; approval engineering & approval management; creation of approval documents; preparation of scoping-paper, creation of expert reports, environmental impact study Gas and steam turbine power plant, Saarbruecken, Germany Services: design services, approval management Gas and steam turbine power plant, Bremen, Germany Services: design services, tender process management and contract awards Gasturbine power plant, Erfurt, Germany Services: design services, approval management, tender, site management, commissioning, supervision and contract awards

Waste-to-Energy Plants (WtE Plants) Waste-to-Energy plants have grown in importance in industrialized countries with high population densities. Decreasing space for landfill areas and EU legislation have called for the reduction of waste deposits. An effective reduction of organic waste is only possible by waste incineration combined with energy production. Even if the energetic capacity of WtE plants is relatively small in comparison to public power plants, the special type of fuel necessitates special process technologies and investments, and therefore specialist knowledge in planning and realization: High investments (often more than 100 million) require effective project management, cost calculation, and controlling. The diverse consistency of waste requires special efforts in transportation, treatment equipment, storage, and feeders as well as fire-fighting and safety systems. The diverse chemical structure of waste causes special requirements for combustion and flue gas cleaning systems. Different types of flue gas cleaning offer technically and economically optimal solutions depending on the gas components. The complex handling of solid fuels, additives, ashes, and other substances leads to complex process technologies and high demands on engineering, tendering, contract awarding, and site management. Flue gas emissions require in depth environmental impact analyses and permitting processes. Dealing with members of the public on sensitive issues relating to WtE plant projects requires specialist knowledge of legal demands and process monitoring.

Filborna, Helsingborg, Sweden References Waste-to-energy plant, Bernburg, Germany Services: design services, approval management, tendering and contract awards, site management, commissioning supervision Filborna, Helsingborg, Sweden Services: project management, process (boiler, turbine, flue gas cleaning, automation and electricity), QAQC, HSE management, construction (building and land) and architecture Szczecin Metropolitan Area, Szczecin, Poland Services: technical assistance, contract engineering, design documentation, financial planning Bionerga power plant, Gent, Belgium Services: project management, permitting procedure, environmental impact assessment, environmental permit, building permit, technical engineering of the energy plant (pre-study, predesign, basic reference design), architectural design and integration into the environment and tendering procedure (bidding) Waste-to-energy plant, Erfurt, Germany Services: design services, approval management, tendering and contract awards, site management, commissioning supervision Inter-Municipal Waste Management, Konin, Poland Services: contract engineering Waste incineration plant, Solingen, Germany Services: design services, approval management, tendering and contract awards, site management, commissioning supervision

Large-scale Biomass Plants Biomass incineration plants mostly powered by wood are an essential component in the CO 2 reduction philosophy of most European countries due to a CO 2 -neutral combustion. The importance of biomass power (and heating) is based on its non-reliance on climatic and weather conditions like sunshine or wind. Thus biomass power plants reduce the need for other renewable energy sources. Even if biomass plants are rather small compared to public power plants, the fuel requires complex process technologies and specific high investments similar to WtE plants. So the know-how for planning and realization is comparable. High investments require effective project management, cost calculation, and controlling processes: The diverse consistency and structure of biomass require special efforts concerning transportation, treatment equipment, storage and feeders as well as fire-fighting and safety or flue gas cleaning systems. In case of biomass gasification, gasifiers are sensitive to the inhomogeneous structure of biomass. This can impede the gasification process. Biogas needs additional gas cleaning facilities before its combustion in gas engines or before supplying it into public gas nets. The complex nature of handling solid fuels, additives, ashes, and other substances leads to complex process technologies thus requiring specialist expertise in engineering, tendering, contract awarding, and site management.

Eldaren, Tidaholm, Sweden References Wood-fired power plant, Bergkamen, Germany Services: feasibility study, basic engineering, approval management, tendering and contract awards Biomass power plant, Kapiteltal, Germany Services: design services, approval management, tendering and contract awards, site management, commissioning supervision, local Health and Safety Coordination Eldaren, Tidaholm, Sweden Services: project management, process (boiler, turbine, flue gas cleaning, automation and electricity), QAQC, construction (building and land) and architecture, environmental impact assessment Junckers Biomass CHP, DONG Energy, Køge, Denmark Services: due diligence study, technical and economic due diligence REFA Waste-to-Energy Plant, Nykøbing Falster, Denmark Services: prefeasibility study, optimisation of Waste-to-Energy heat and power production facilities including a larger biomass heating facility

Combined Heat & Power Plants CHP CHP plants are becoming increasingly important - following CO 2 emissions reduction initiatives They operate independently from climatic conditions. They offer the best reduction of CO 2 emissions apart from renewable energies. CHP plants offer the best relationship of CO 2 reduction to costs of all energy systems. CHP plants are essential for industrial processes and district heating systems. Large-scale CHP plants are connected to most industrial heating processes or district heating systems. Therefore they must meet the requirements of various systems: Due to these diverse and often contrary requirements, the engineering of CHP plants requires specialist knowledge: analysing the industrial production process from start-up to shutdown of plants. taking into consideration instationary process conditions. investigation of electricity and heat production with thermodynamic simulation programmes for different load conditions. economical cost-benefit analysis (e.g. according to Total Cost of Ownership ) to hedge high investments. They have to offer optimized electricity production according to local or on-site electricity demands taking into account stock market prices. CHP plants must provide the necessary heat for industrial processes or district heating nets in a reliable way. In the case of industrial processes, this includes extreme load variations and load changing velocities.

References CHP gas turbine power plant, Erfurt, Germany Services: design services, approval management, tendering and contract awards, site management, commissioning supervision CHP VEKS District Heating Transmission Company, Denmark Services: planning, conceptual and detailed design, implementation and supervision of pipe systems, pump stations, SCADA system and connecting installations Nordforbrænding Waste-to-Energy Plant, Hørsholm, Denmark Services: energy planning and implementation of extension of district heating network CHP Plant Värmekällan, Skövde, Sweden Services: development design requirements, tender documents, incl. technical specifications, procurement, incl. preparation of contract documents, arrangement of project meetings, follow-up of documentation, inspection, trial operation and performance tests Engine based CHP plant, Munich Airport, Germany Services: Basic study and basic engineering including the integration into the energy system of the airport

Grontmij is a leading sustainable design and management consultancy, operating in the sectors Planning & Design, Transportation & Mobility, Water & Energy, Monitoring & Testing. At the core of our business is the principle of sustainability by design which is a leading value proposition for our customers. Grontmij is the third largest engineering consultancy in Europe with almost 9,000 professionals around the world. Contacts Belgium Mr Patrick Van de Velde Grontmij Belgium NV/SA M. Gillemanstraat 5 BE-9060 Zelzate T +32 9 345 70 67 F +32 9 345 53 67 Patrick.vandeVelde@bns.net Netherlands Mr Jeroen Reijnhart Grontmij Nederland B.V. Nieuwe Stationsweg 4 9751-SZ Haren T +31 50 5334412 F +31 30 220 01 71 Jeroen.Rijnhart@grontmij.nl Denmark Mr Søren Larsen Grontmij A/S Granskoven 8 DK-2600 Glostrup T +45 4348 6829 F +45 4348 6813 soren.larsen@grontmij.dk Poland Mr Maciej Chrzanowski Grontmij Polska Sp. z o.o. Ziębicka 35 PL-60-164 Poznań T +48 61 8649327 F +48 61 8649301 Maciej.Chrzanowski@grontmij.pl France Mr Guillaume Savornin GINGER - Grontmij France 18-20 rue Teilhard F-75008 Paris T +33 1 56 69 19 40 F +33 4 42 99 28 64 g.savornin@gingergroupe.com Sweden Mr Per-Anders Tauson Grontmij AB Norra Bulltoftavägen 65 A SE-212 09 MALMÖ T +46 104 802 196 F +46 10 480 23 63 Per-Anders.Tauson@grontmij.com Germany Dr. Bernhard Poos Grontmij GmbH Graeffstraße 5 D-50823 Cologne T +49 221 57402 31 F +49 221 57402 11 bernhard.poos@grontmij.de United Kingdom Mr Scott Aitken Grontmij UK Suite 3/5 City Park 368 Alexandra Parade UK-G31 3AU Glasgow T +44 7879 432 483 F +44 131 550 6499 scott.aitken@grontmij.co.uk 12 04 12 Photograpy: Grontmij, Gerd Kittel / Grontmij GmbH, Stefan Körber / fotolia.com, tomas / fotolia.com, kw-on / fotolia.com, Lichtkunst / fotolia.com www.grontmij.com