MOBILE INTERNET HUAWEI E220 3G USB MODEM With this modem you can easily: Access the internet Send or receive text messages Manage contacts The E220 package box contains the following items: One E220 HSDPA USB Modem (including a PDF User Manual and a setup program) Two USB cables (you only need to use the double-ended cable if a single one of your USB ports does not supply enough power) A Quickstart guide To use the modem your PC is required to have: CPU: Pentium 4, 1 Ghz or above Memory: 128 MB RAM or above Hard disk: 50MB or above Operating system: Windows XP, Windows 2000 or Windows Vista USB modem interface: USB 2.0 full speed Display resolution: 800x600 or above, 1024x768 is recommended Note: Make sure that the configuration of your PC meets the requirements. Otherwise, improper configuration may degrade the performance of your PC. Indicator status: Indicator status (LED light) Off Blinking green twice every 2.7 seconds Blinking green once every 2.9 seconds Blinking blue once every 2.9 seconds On (green) On (cyan/blue) Description Modem is powered off Modem is searching for a network or no network is available GPRS network is normal 3G network is normal GPRS data service is established 3G data service is established Getting started To prepare the modem for use take out the SIM card slot from the side of the modem. Then insert the SIM card into the slot. Make sure that the SIM card if fully inserted and then insert the slot back into the modem. The installation procedures may vary slightly with the operating system. The following uses the Windows XP operating system as an example.
Note: Before connecting E220 to the PC, power on the PC. Otherwise, the installation may be affected. Use the USB cable to connect the modem to the PC by plugging one end into the USB interface of the modem and the other end into the USB port of your PC or laptop. Either of the cables provided can be used as the double ended cable only provides and auxiliary plug to provide more USB power to your modem. Windows XP auto detects and recognizes the modem and displays the indicating that the modem is connected successfully. icon on the lower right corner The setup program auto runs. Then the modem installation interface appears: Note: If the auto-run program does not start, go to My Computer, open the modem icon and double-click the AutoRun.exe file in the drive to run it. Once you have chosen your language, follow the instructions on the screens below:
Once you have completed the installation, the shortcut icon desktop. for Mobile Connect will appear on your If you wish to disconnect the modem exit the Mobile Connect program, then stop it through the hardware removing function of windows. If you wish to uninstall the modem use the Add or Remove Programs function in the Windows Control Panel. To launch Mobile Connect connect the modem to the computer for auto launch or double click on the Mobile Connect icon. If you are required to enter the PIN code, enter the correct one and click OK. If you enter the wrong PIN code three times consecutively, your SIM card will be blocked. In this case use the PUK code to unblock it. If you enter the wrong PUK code ten times consecutively, your SIM card will be disabled and you will need to contact your service provider. After Mobile Connect is launched, the home screen is displayed as follows: Once this is open you need to create a Gibtelecom profile. To do this select Settings>Network Connection Settings, click New and enter the following information
Then click Save. Also click Settings>Choose Connection Type and select 3G preferred You can access the Internet through a 3G or GPRS connection. Once you have checked that under Network Connection Settings the Gibtelecom profile is selected then click to establish the connection. After a prompt is displayed indicating that the connection is established, click operating system to access the internet. Click Disconnect to close the connection. or launch the browser of the For information on the rest of the modem functions see the User Manual. If you would like more information or have any questions on Gibtelecom s Mobile Internet bundles or data usage rates please contact Customer Services on 20052200.