glass & Glazing Products
WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system consists of headers, sills, mullions, and corner assemblies that allow you to create a multitude of glass wall configurations. With minimal parts and a simple snap-together assembly process, installation of WallMaker is fast and easy. WallMaker components can be anodized to meet all your color specifications. Glass Clips Stylmark s glass clips provide added strength to interior glass walls by holding the panels of glass in line with one another. A number of city building codes require clips prior to occupancy, and Stylmark s glass clips fulfill these requirements. The clean, simple lines of our clips also enhance the appearance of glass walls, and they can be ordered in a variety of colors and finishes to complement your WallMaker system. Mirror Products Mirrors framed by Stylmark have clean lines that provide a subtle decorative accent to any area. And because they re from Stylmark, you can depend on a product that s designed to give years of troublefree service. Our mirror products include Tri-Vue Mirrors, mirror frames, mirror trims and wardrobe doors. Mirror product components can be ordered in stock lengths, or they can be fabricated to your size specifications.
Glass & Glazing Products Stylmark offers a variety of products that are custom tailored for interior glass and glazing applications, including WallMaker systems, mirror frames and wardrobe doors. We utilize our color and design expertise to integrate these products into their surroundings, giving an attractive and inviting appearance. This ensures the products you order will fit perfectly into both new and existing environments. Curving 2 WallMaker 3 Glass Clips 9 Tri-Vue Mirrors 11 Mirror Frames 13 Mirror Trims 15 Wardrobe Doors 18
Curving Bring it all together with a few carefully placed curves. Stylmark is able to curve virtually all of our products to meet your radius requirements. Simply provide us with dimensions as indicated below and watch your design come to life! (S) (L) CHORD (C) (IR) (α) (IR) EXAMPLE Required Information: Orientation of part to be curved Radius (IR) Arc Length (S) Chord (c) or Included Angle (α) Straight Length (L) Cut Length Notes: Provide AutoCAD or SolidWorks drawing if available 2 Stylmark Glass and Glazing Products www.stylmark.com
Innovation in aluminum and steel design WallMaker Our WallMaker system includes versatile interior store front components that offer the quality you expect from Stylmark. Extrusions are designed for 1/ or 3/8 glass and may be ordered in standard 12 foot stock lengths or made-to-order lengths. Headers and sills are available in a variety of configurations to maximize design flexibility. One of WallMakers greatest assets is its ease of installation. With few parts, no exposed fasteners and a simple snap-together process, you can create a beautiful, unique glass wall in no time. ORDERING WALLMAKER SILLS & ANCHOR #110361 1 SILL #110375 4 SILL #110481 6 SILL #110358 ANCHOR #110482 4 SILL #110358 ANCHOR #110568 4 SILL NO ANCHOR #110698 4 SILL #110697 ANCHOR HEADERS #110359 #110399 #110483 #110434 #110360 #110700 VERTICAL POSTS #110215 #510529 #510763 #510761 #510762 #510760 #110699 #110521 FILLER STRIPS #110194 SETTING BLOCKS #226015 5/8 X 1/4 X 4 SETTING BLOCK #226014 5/8 X 1/ X 4 SETTING BLOCK ENDCAPS 1/ ENDCAP 1/8 ENDCAP BRACKETS 90 DEGREE BRACKET FOR SILLS 120 DEGREE BRACKET FOR SILLS 135 DEGREE BRACKET FOR SILLS Part Number 110483 Header Part Number 510763 H-Assembly Part Number 510761 90º Corner Assembly Part Number 510760 Wireway Assembly (Optional) Part Number 110521 Filler Strip for part numbers 510529, 510760, 510761, 510762, and 510763 Part Number 510762 5'' H-Assembly (Optional) Part Number 510459 L Mount Bracket Part Number 110481 6'' Sill (Optional) Part Number 110482 4'' Sill Part Number 110358 Anchor Part Number 510458 T Mount Bracket 800.328.2495 Stylmark Glass and Glazing Products 3
WallMaker Sills and Anchors Part #110361 Sill 1 Part #110375 Sill Part #110358 Anchor Part #110481 Sill Part #110358 Anchor 1 1 1/ 1 1/ The glass height will be 1 1/ less than the overall unit height when using Sill #110361 with Header #110360. 4 3/4 6 3/4 #110358 ANCHOR Part #110482 Sill Part #110358 Anchor Part #110568 Sill* 1 3/4 Part #110698 Sill** Part #110697 Anchor** 1 1/ 4 3/4 1 1/ FOR USE WITH 3/8 or 1/ GLASS #110358 ANCHOR FOR USE WITH 1/4 or 3/8 GLASS 2 3/8.388 Sill only; anchor, endcaps and 4 4 FOR USE WITH 1/4 or 3/8 GLASS 5/8 SILL #110698 CAN ONLY HAVE A BUFFED OR BRUSHED FINISH #110697 ANCHOR GLASS SIZES FOR WALLMAKER SILL SIZE GLASS SIZE 4 4 1/ LESS THAN OVERALL HEIGHT 6 6 1/ LESS THAN OVERALL HEIGHT = finished surface Notes: *Part #110568 Sill only; anchor, endcaps and glazing not available. **Part #110698 and #110697 stock length is 120. 4 Stylmark Glass and Glazing Products www.stylmark.com
Innovation in aluminum and steel design WallMaker Headers and Vertical Posts Part #110359 Header with Legs 1 Part #110360 Header 1 Part #110399 Header 1 3/4 5/8 3/4 3/4 Part #110434 Deluxe Header for 3/4 glass 2 9/16 2 1/ 1 3/4 Part #110483 Header 1 3/4 Part #110700* Header 1 1/ FOR USE WITH 1/4 or 3/8 GLASS 1 1/8 3/4 5/8 Vertical Posts Part #110215 Vertical Post 3/4 Part #110194 Filler Strip for # 110215 Part #110699 Vertical Post 1 1/ FOR USE WITH 1/4 or 3/8 GLASS 3/4 1 3/4 13/16 5/8 Notes: *Part #110700 stock length is 120. = finished surface 800.328.2495 Stylmark Glass and Glazing Products 5
WallMaker Vertical Assemblies Part #510760 Wireway Assembly Part #510761 90º Corner Assembly 3 11/16" 2" 3/4" 1" 1 3/4" 2 3/4" 2" 3/4" 3/4" 1" 2 3/4" Part #510762 5 H-Assembly Part #510763 H-Assembly 2 5/16" 5" 2" 3/4" 2 5/16" 2" 3/4" 1" Part #510529 Smooth H-Assembly Part #110521 Filler Strip for part numbers 510529, 510760, 510761, 510762, and 510763 2" 3/4" 2 11/32" 3/16" = finished surface 6 Stylmark Glass and Glazing Products www.stylmark.com
Innovation in aluminum and steel design WallMaker Glazing Vinyl and Setting Blocks Part #226015 5/8 x 1/4 x 4 Setting Block Part #226014 5/8 x 1/2 x 4 Setting Block MODEL # 110481 110375 110482 110698 110359 110360 110399 110483 110700 DESCRIPTION 1/4 3/8 1/ SILL N/A 226021 & 226022 226024 & 226025 SILL N/A 226016 226013 SILL N/A 226021 & 226022 226024 & 226025 SILL 226021 & 226022 226024 & 226025 N/A HEADER WITH LEGS N/A 226016 226013 HEADER N/A 226016 226013 HEADER N/A 226016 226013 HEADER N/A 226021 & 226022 226024 & 226025 HEADER 226021 & 226022 226024 & 226025 N/A Note: Deluxe Header #110434 for 3/4 glass uses #226021 & #226022 glazing vinyl. 3/8 Panels 1/ Panels 110360 110359 110483 110360 110359 110483 226016 Glazing 226021 Glazing 226022 Glazing 226013 Glazing 226024 Glazing 226025 Glazing Setting Block Setting Block Setting Block Setting Block 110361 110481 110482 110361 110481 110482 800.328.2495 Stylmark Glass and Glazing Products 7
WallMaker Endcaps 1/ Endcap ENDCAPS PART# DESCRIPTION 1/8 ENDCAP 1/ ENDCAP 110360 HEADER 410412 N/A 110361 SILL 410413 N/A 110434 HEADER 410896 N/A 110481 110482 SILL SILL 410545 410367 410544 410543 1/8 Endcap 110483 HEADER 410366 410542 110568 SILL 411439 N/A Brackets BRACKETS WITH SCREWS WITHOUT SCREWS 90 DEGREE BRACKET 510274 310354-01 120 DEGREE BRACKET 510540 310354-03 135 DEGREE BRACKET 510440 310354-02 8 Stylmark Glass and Glazing Products www.stylmark.com
Glass Clips Innovation in aluminum and steel design Stylmark s Glass Clips provide added strength to interior glass walls by holding panels of glass in line with one another. These durable anodized aluminum clips provide decorative accents and accommodate 3/8 or 1/ thick glass panels. The clips install easily with screws and plastic insulators protect the glass from fractures or chips. Pair Stylmark Glass Clips with our WallMaker system to ensure your interior glass wall meets city building codes and maintains a cohesive, high-quality look. ORDERING GLASS CLIPS ASSEMBLY # 232045 511008 510571 510572 510582 510583 510584 510585 510586 510587 510955 DESCRIPTION RECTANGULAR - 135 DEGREE CLIP RECTANGULAR - 90 DEGREE CLIP SQUARE - 180 DEGREE CLIP ROUND- 180 DEGREE CLIP ROUND - 90 DEGREE WALL MOUNT SQUARE - 90 DEGREE WALL MOUNT ROUND - 90 DEGREE CLIP SQUARE - 90 DEGREE CLIP ROUND - 135 DEGREE CLIP SQUARE- 135 DEGREE CLIP RECTANGULAR - 180 DEGREE CLIP GLASS THICKNESS 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ 3/8 OR 1/ Round Glass Clips Part #510572 Round - 180 Clip Part #510582 Round - 90 Wall Mount O 2 15/16 3/3 9/16 1 1/8 9/16 Part #510584 Round - 90 Clip Part #510586 Round - 135 Clip 3/3 9/16 9/16 800.328.2495 Stylmark Glass and Glazing Products 9
Glass Clips Square Glass Clips Part #510571 Square - 180 Clip Part #510585 Square - 90 Clip 3/3 9/16 3/3 9/16 Part #510583 Square - 90 Wall Mount Part #510587 Square - 135 Clip 9/16 1.20 3/3 9/16 Rectangular Glass Clips Part #232045 Rectangular - 135 Clip Part #510955 Rectangular - 180 Clip 9/16 3/3 3/3 9/16 1 1/8 1 1/4 Part #511008 Rectangular - 90 Clip 2 9/16 10 Stylmark Glass and Glazing Products www.stylmark.com
Tri-Vue Mirrors Innovation in aluminum and steel design The design of our aluminum Tri-Vue Mirrors allows for a full expanse of mirrors without metal mullions to obstruct the view. Each wing opens silently at the touch of a finger, and a discreet steel pivot hinge provides increased stability. The winged mirror channel leaves room for an added 1/8 hardboard or plastic laminate to ensure added protection. Part #620033 Tri-Vue Mirror Assembly Top Hanger #120031 Top Center Mirror Frame #120029 Mirror Frame #120070 Glazing Tape #119004 Panel Trim #120034 Mirror Frame #120030 Fixed Mirror Frame #120029 Top Hanger #120031 1/4" Plate Mirror (supplied by other) 1/8" Backing Panel (supplied by other) Rubber Bumper #221014 Fixed Mirror Frame #120029 Bottom Hanger #120032 Mirror Frame #120070 Steel Pivot Hinge Bottom Center Mirror Frame #120029 Bottom Hanger #120032 ORDERING TRI-VUE MIRRORS MODEL # DESCRIPTION DIMENSIONS 620033 LEFT WING WIDTH RIGHT WING WIDTH TRI-VUE MIRROR CENTER PANEL WIDTH OVERALL HEIGHT Notes: Wings should not exceed 2 in width. Wings should not exceed 45 pounds in weight (equivalent to a 2 x 84 wing panel glazed with a 1/4 mirror). Extra lead time may be required for mirrors with wings exceeding 2 x 66. Contact Stylmark Customer Service for assistance with glass sizes. 800.328.2495 Stylmark Glass and Glazing Products 11
Tri-Vue Mirrors Hardware and Accessories Part #360001 Cabinet Box Size: 15 3/4 W x 23 3/4 H x 4 D Stylmark s one piece cabinet boxes are produced from high-impact, moisture resistant white plastic. The smooth surfaces are designed to clean quickly and easily with a damp cloth. Part #119004 1/4 Black Vinyl Glazing Tape Part #221014 Gray Bumper Part #120029 Fixed Mirror Frame Part #120030 Tri-Vue Frame Part #120031 Top Hanger 3/4 3/4 7/8 7/8 Part #120032 Bottom Hanger Part #120034 Panel Trim Part #120070 Tri-Vue Wing Horizontal 5/32 3/4 3/4 7/8 = finished surface 12 Stylmark Glass and Glazing Products www.stylmark.com
Mirror Frames Innovation in aluminum and steel design Mirrors framed with Stylmark products have clean lines and provide a subtle decorative accent. Because they are from Stylmark, you can depend on a product that is designed to give years of trouble-free service. Mirror frame products may be ordered in 12 foot stock lengths, or fabricated to your size specifications. ORDERING MIRROR FRAMES MODEL # DESCRIPTION DIMENSIONS: WIDTH x HEIGHT 620062 MIRROR FRAME OUTSIDE OF MIRROR OUTSIDE OF FRAME Part #620062 Mirror Frame Assembly Mirror Frame #120054 Mirror Frame #120054 Glazing Clip #129006 Mitre Bracket Assembly #520005 Glazing Clip #429007 Mirror Frame #120054 Glass by others Mirror Frame #120050 Mount Bracket #120052 Notes: Mirror frame materials can be ordered in 12 foot lengths for customer fabrication. 800.328.2495 Stylmark Glass and Glazing Products 13
Mirror Frames Part #120050 Mirror Frame - Bottom Part #120052 Mount Bracket Part #110167 Angle Mount Bracket 23/32 3/8 5/16 2 13/16 2 Part #120054 Mirror Frame 13/16 Part #129006/429007 Plastic Glazing Clip 11/16 Part #429004: 1/4 Glazing Wedge Part #429005: 3/16 Glazing Wedge Part #520005 Mitre Bracket Assembly = finished surface 14 Stylmark Glass and Glazing Products www.stylmark.com
Mirror Trims Innovation in aluminum and steel design Stylmark s Mirror Trims offer beautiful options for protecting and trimming mirrors and mirrored walls. Our J-Molding may be used at the top and bottom of a floor to ceiling mirror application. When a horizontal or vertical accent is required, use one of our two Division Trims. Mirror Trim products may be ordered in 12 foot stock lengths, or pre-cut to your desired length. 1/4 glass or mirror panels supplied by others 5/8" J-Molding Part #420107: with holes Part #120055: without holes To install, simply position the mirror into the top channel, and then lower it into the bottom channel. 5/16" J-Molding Part #420068: with holes Part #120041: without holes Mirror Divider Trim Part #420108: with holes Part #120057: without holes 9/16" Mirror Divider Trim Part #420109: with holes Part #120061: without holes 9/16" Divider trims are supplied slotted with holes for adjustability and rapid installation. Stylmark s J-Molding and Divider Trims feature a raised ridge to protect the mirror backing. = finished surface 800.328.2495 Stylmark Glass and Glazing Products 15
Mirror Trims Part #420110: Corner Column Trim with slots Part #120063: Corner Column Trim without slots This Mirror Trim features slotting measuring 9/64 x 39/64. Slots are set 1 on center, beginning 18 from one end and continuing for another 66. It accepts Capital B-line (2300 series) and Crown Le-Mans series brackets (by others). This molding will not accept K.V. Bracket 160 or 161. Part #410466: Recessed Trim Base Design a mirrored wall with your favorite Stylmark Trim Maker shapes. By using this recessed trim base, a 1/4 mirror fits perfectly between your wall and our trim. See our Architectural Trim and Moldings brochure for choices of trims. 3/8" 7/16" 1 5/8" Part #110184 1 1/ Radius Cover Trim This trim allows you to soften a harsh corner while providing a durable and protective edge. Part #120064 1 1/ Radius Column Corner Trim This Mirror Trim provides a radiused corner with stepped reveal and has been developed especially for 3/4 panels. R 1 1/2" 9/32" R 1 1/2" 3/4" = finished surface 16 Stylmark Glass and Glazing Products www.stylmark.com
Mirror Trims Innovation in aluminum and steel design Part #110669 3/4 Column Edge Part #120058 Column Edge Trim Part #120065 90 Column Trim 13/16" 1/8" 3/8" 5/8" 9/32" 2 1/4" Part #120066 135 Column Trim Part #120067 90 Outside Corner Trim 3/8" 7/16" 9/32" 135º Part #120059 90 Outside Corner Trim Part #120062 45 Column Trim 5/16" 5/8" = finished surface 800.328.2495 Stylmark Glass and Glazing Products 17
Wardrobe Doors Wardrobe Doors from Stylmark are designed to give years of trouble free service. Wheel assemblies are incorporated into the bottom rail, providing a smooth rolling, long lasting unit. Additional features include cantilevered rollers to easily accommodate out-of-plumb field conditions and optional security door styles to provide additional protection. Cantilevered Rollers These wheels adjust easily to accommodate out-ofplumb field conditions and height variations plus 1 1/ and minus 5/8 ORDERING WARDROBE DOORS MODEL # 630017 630019 630021 630022 DESCRIPTION DIMENSIONS: WIDTH x HEIGHT 2 DOOR CONVENTIONAL STYLE OPENING SIZE 2 DOOR SECURITY STYLE OPENING SIZE 3 DOOR CONVENTIONAL STYLE OPENING SIZE 3 DOOR SECURITY STYLE OPENING SIZE Notes: Assemblies do not have a vertical jamb member. The maximum weight per door must not exceed 125 pounds in weight, which is equivalent to a 5 x 8 door panel glazed with a 1/4 mirror. Security style doors accept up to 1 diameter locks. 18 Stylmark Glass and Glazing Products www.stylmark.com
Wardrobe Doors Innovation in aluminum and steel design Conventional Door Style Security Door Style Part #130022 Wardrobe Door Header 2 1/4" Part #130023 Wardrobe Door Track 2 3/16" 2" 3/8" 2 25/32" Part #530024* T-Bolt Plunger Lock Part #139007 Glazing Vinyl for 1/4 Panels Wardrobe door assemblies come complete with an accessory package that includes: Rubber bumper, top guide wheel assembly, screws and lock (security style only). = finished surface *Part #530024 used exclusively with security doors. Notes: 212037 WARDROBE DOOR ACCESSORIES KIT 800.328.2495 Stylmark Glass and Glazing Products 19 PART# 212030 213036 221015 330017 DESCRIPTION 8 x 1 PAN HEAD SCREW 8 x 1 1/4 PAN HEAD SCREW 8-32 X 1 9/16 SCREW RUBBER BUMPER TOP GUIDE 530011 WHEEL ASSEMBLY
Innovation in aluminum and steel design For over five decades, Stylmark has been a leading manufacturer of aluminum and steel products for retail, hospitality, entertainment and other commercial environments. Whether your expertise lies in design, planning, manufacturing or contracting, you can rely on Stylmark to collaborate with you in designing the best possible solution to ensure your business needs and objectives are met. Join Stylmark s employee owners in bringing distinctive designs and unique innovations to life! To learn more about what we can do for your company, please visit us on-line or contact us to request any of the following brochures: Showcases Shelving Products Glass and Glazing Products Architectural Trim and Moldings Transparency and Door Frames Fitting Rooms Hardware and Accessories
BV-COC-940655 Part #971439 Rev. D Stylmark, Inc. 6536 Main Street NE, PO Box 32008 Minneapolis, MN 55432 www.stylmark.com info@stylmark.com 800.328.2495