2011 Technical Training Catalog Version 1 GP Delvecchio, Training Manager Konica Minolta Medical Imaging, USA, Inc. 1/1/2011
Table of Contents Mission Statement and Message Pg. 3 Training Center Locations Pg. 4 Hotel Locations Pg. 5 Training Policies Pg. 6 Student Requirements Pg. 8 Course Offerings Pg. 10 On-Line Registration Process Pg. 15 2 P a g e
Mission Statement: To create and conduct technical training courses which will empower our students to be able to install, service, and maintain Konica Medical Imaging equipment to the highest standards possible. 3 P a g e
Training Locations East (US Headquarters)*: Konica Minolta Medical Imaging 411 Newark Pompton Turnpike Wayne, NJ 07470 800-934-1034 West***: Konica Minolta Medical Imaging 25662 Atlantic Ocean Dr. Lake Forest, CA 92630 949-472-8150 *All Products covered ***Image Pilot course only Contact Information: GP Delvecchio Training Manager 800-934-1034 x-1490 gpdelvecchio@mi.konicaminolta.us Karen Fazio Service Business Manager 800-934-1034 x1425 kfazio@mi.konicaminolta.us 4 P a g e
Hotel Locations East: Residence Inn by Marriott Wayne 30 Nevins Road Wayne, New Jersey 07470 USA Phone: 1-973-872-7100 West: Hampton Inn South Orange County 27102 Towne Center Drive, Foothill Ranch, California, USA 92610 Phone:949-597-8700 Fax: 949-597-8777 *: Other hotels are available in the area. It is the student s responsibility to find and select something other than what is above. 5 P a g e
Training Policies All applicants must adhere to the following Training policies and procedures: 1. All applications for a training class must be received at least 30 days in advance of the course start dates. 2. All applicants must submit a Training Request Form. 3. The Training Request Forms must be completed and approved in advance by the KMMI Training Department. 4. All applicants must meet all of the course prerequisites and requirements. 5. Applicants may be required to successfully complete a telephone pre-screening interview or written Pre-test. 6. Accepted applicants will be notified by the KMMI Training Department. 7. Class space is limited and acceptance will be determined by KMMI criteria as stated in course syllabus. 8. Transportation, lodging, and meals expenses are the responsibility of the attendee. KMMI will provide lunch each training day. 9. The course fee includes a copy of the equipment documentation, service manuals or books, and initial maintenance software as required and listed for each course. 10. Students must adhere to the KMMI Code of Conduct while attending KMMI courses, lectures, or seminars. 11. Course hours are from 8:30am to 5pm. Please make travel plans AFTER 7pm on the last day of class. 12. All course dates are subject to change and may be changed with 5 business days advance notice; this includes course cancellations. 13. Course content is subject to change without notice. 14. All students must submit a P.O./Credit Card for tuition before attending the course. 15. All tuition will be billed the month that the course is scheduled to run. 16. Cancellation fee schedule*: 30 Days Prior to Class start: Full Refund 29 15 Days Prior: 75% Refund 14 7 Days Prior: 25% Refund 6 0 Days Prior: No Refund *Classes can be re-scheduled without penalty for any course enrolled. After the first reschedule, the student will be charged an administration fee. 17. If a student is asked to leave a course due to performance or conduct issues, KMMI will not refund any portion of the tuition. 18. For courses with testing: Certificates will not be issued for any students who do not pass the course. In addition, students may be asked to leave the course at the instructor s recommendation at any time during the class. 6 P a g e
General Student Information: Hours of Operation: The training center opens at 8:30AM and closes at 5:00PM. Security: On Monday please sign in with the Receptionist at the front desk. You will receive your security tag for the week. You are required to sign in and out every day for the duration of the training. In addition all students are restricted to the training area of the building. Telephones: No outside Phone service is provided at this time. Please turn off your cell phones and pagers while in class. However you may use your cell phone in the break room. Internet Access: Due to the security policy of our network administrator, students will not have access to the internet. Break / Lunch Room: The Break-lunchroom is in the training center. Limited access to the Coin operated soda and snack vending machines, microwave, toaster and Refrigerator are available by escort only. Complementary Lunch will be served Monday Friday. PLEASE INDICATE any special dietary needs in advance by calling Karen Fazio @ 1-800-934-1034 x1425. 7 P a g e
Student Requirements For all parties preparing to engage in maintenance, service, and/or installation of Konica Minolta Medical Imaging USA Inc distributed equipment lines as listed below: PrintLink-I, II, III, and V print capture and management interfaces DryPro722, 751/752, 771, 793, 832, and 873 dry laser imager family Regius 110, 150, 170, 190, and 210 cassette digitizers CS-1, 2, 3, 2000, and 3000 Control Stations for Regius product line ImagePilot CR system Regius 350, 370, and Flex DR direct digitizers All Candidates for training must meet or exceed the requirements as listed and detailed in this document. These requirements and prerequisites are designed to ensure that the candidate can complete our courses and will exhibit our stated competencies when servicing our equipment line. Computer & Network Related Core Competencies Training Candidates Must Have: Strong Windows 95/98/NT/2000/XP operating systems knowledge Working understanding on network topologies and protocols, especially Ethernet 802.3, routers, hubs, switches, TCP/IP and 10/100/1000 Base-T systems Strong network [troubleshooting] skills in connecting to TCP/IP networked computer systems, using Tel-net, FTP, and Windows Network. Basic knowledge and / or previous experience with DICOM protocol and PACS systems. All students may be required to pass a PC / Networking / DICOM basic skills assessment test on the first day of class. If the student cannot pass this testing and they cannot demonstrate proficiency [by the final day of training] in these areas the student will not PASS the equipment course they are attending. At Least 6-months digital [modality] medical imaging experience Working knowledge of test equipment: DVM, logic probes and others standardized test equipment [which varies by equipment line] Basic understanding of X-Ray Imaging principals Basic understanding of X-Ray Image quality and determinants Basic understanding of Modality imaging: Analog and Digital video signals Previous experience on modality interfacing, especially analog Video systems Basic understanding in Safety Standards and Protocols: Hazardous Energy Electrical Safety, Laser Energy Safety, and Radiation Safety. Modality imaging experience in CR/PACS. 8 P a g e
Equipment/Tools the Candidate Must Have: Each student must supply their own X-Ray film safety badges - No student will be allowed to work in or near any X-Ray devices without their badge. Laptop Computer with: Please note PC technology changes quickly contact KMMI for the latest PC Specifications Pentium III or higher is required 1 GB RAM or higher 10 GB free Hard Disk Drive space (minimum) DVD-CD-R/W Drive; must be able to burn CD s and read DVD s RS-232C Serial Communications Port - DB9 or USB to Serial Converter Ethernet Card with 10/100/1000 Base-T connection The student must have administrator rights and be able to set up new users on their laptops With one of the following Operating Systems: Windows XP Professional with latest supported Service Packs Please note Windows Vista/7 may not work with Konica proprietary software Recommended Software: Adobe Acrobat Reader 7.0 or higher Microsoft Office or MS Word/MS PowerPoint/MS Excel Notes: KMMI will not install or configure any software without the original licensed copies of the software. It is the students responsibility to provide the software as required. Anti- Virus Software must be installed and a scan is to be performed 24 hrs prior to class arrival. Please refer to the document Tools and Equipment Requirements which lists tool and supply requirements for each of KKMI equipment models. These are needed to service and maintain the equipment. 9 P a g e
Course Offerings Not all courses are available to all students. Please contact Konica Minolta for complete course details. Pages 11: Computed Radiography Pages 12: Laser Imagers Page 13: Legacy Products Page 14: Digital Radiography Page 15: On-Line Registration Process 10 P a g e
Computed Radiography Konica CR (Replaces First Responder and Bio-Med Courses) Price: $5000.00 Install, service, and maintain CS-2/CS-3 & Regius 110/210 Course Length: 8 Days Course #: K-CR Type: KMMI/Svc Agents/ BioMed NanoP/Regius 110 Price: $3000.00 Install, service, maintain, and provide application on CS-2/R110 Course Length: 5 Days Course #: NP-R110 Type: Service Agents ImagePilot CR Price: $3000.00 Install, service, maintain, and provide application on ImagePilot CR/R110 Course Length: 5 Days Course #: IP-CR Type: KMMI, Service Agents CR Advanced (Must be previously trained on CS-2/CS-3 Regius 170/190) Price: $2000.00 Applications training for the FSE on the CS-2/3 Course Length: 3 Days Course #: CR-ADV Type: KMMI, Service Agents Regius 210 (Must be previously trained on CS-2 or CS-3/R190) Price: $300.00 Install, service, and maintain R210 Course Length: Computer Based Training (CBT) Course #: R210 Type: KMMI, Service Agents Regius 110HQ/210 (Must be previously trained on CS-2 or CS-3/R190)-Latin America Only Price: $500.00 Install, service, and maintain R110HQ/210 Course Length: Computer Based Training (CBT) Course #: R110HQ-210 Type: Service Agents New Course 11 P a g e
Laser Imagers PrintLink 5 and DryPro 832/873 (M) Price: $3000.00 Install, service, and maintain PL5 (IN/ID/IV/IC) & DP832/873 with mammography Course #: DP873-DP832-PL5 Course Length: 5 Days Type: KMMI, Service Agents 12 P a g e
Legacy Products Legacy Courses: SRX Processors PL 1&2 DP 722 & 75x DP 771/793M These courses are scheduled based upon need and may not appear on the official schedule. Please contact Karen Fazio @ 800-934-1034 x1425 for details. PrintLink 1 and 2 Price: $3000.00 Repair and operation of PL 1 & 2 Course #: PL 1-2 Course Length: 5 Days Type: KMMI, Service Agents DryPro 722 and 75x (Must attend PL1-2) Price: $3000.00 Service and maintain DP 722 & 75x Course Length: 5 Days Course #: DP722/DP752 Type: KMMI, Service Agents DryPro 771 and DryPro 793 (M) Price: $3000.00 Service and maintain DP771/793 with mammography Course Length: 5 Days Course #: DP771/793 Type: KMMI, Service Agents SRX Processors Price: $1000.00 Install, service and maintain SRX 101, 201, and 701 Course Length: 3 Days Course #: SRX Type: KMMI, Service Agents 13 P a g e
Digital Radiography Konica Minolta Direct Digitizers (Must attend XCR-I&M XCR-FR) Price: $3000.00 Install, service, and maintain Regius Direct Digitizers (R350/370/Flex DR) Course Length: 5 Days Course #: KDD Type: KMMI, Service Agents, BMed New Course 14 P a g e
2011 Course Registration New On-Line Registration process: 1. Launch the Service Support System (S3) website: a. http://s3.mi.konicaminolta.us/ b. Select [Training] 2. Once in the [Training] section, select the Training Registration Link. 3. The following page will appear, select Course category to register (CR or Laser Printers) 4. Select course from the list below and it will take you to the registration page for that course. 15 P a g e
Konica Minolta Medical Imaging, USA, INC. 411 Newark Pompton Turnpike Wayne, NJ 07470 Phone: 800-934-1034 E-mail: gpdelvecchio@mi.konicaminolta.us kfazio@mi.konicaminolta.us 16 P a g e