Light-Weight Panels High quality panels
WELCOME TO STENCA TRADING - Global focus with local service Stenca Trading offers optimal solutions for the offshore, marine, refineries and cogeneration industry. Worldwide Stenca Trading provides professional assistance in insulation, outfitting, accommodation and fire protection equipment for oil rigs, ships, onshore terminals and FPSOs. Aalborg, Denmark is the headquarter of Stenca Trading, but our offices can also be found in Stavanger, Norway, and in Flensburg, Germany. Our agents are located in Vietnam, Singapore, Korea, Spain, Nigeria and China. We are very aware of the developments in the offshore and marine industry, and we are contributing to development and innovation of new products in these areas. We work closely with our partners and suppliers which ensures our customers a wide range of services regarding our heat, cold, sound insulation and fire protection equipment. We strive to engage in long term relationships and having a large group of satisfied customers. Satisfied customers are our greatest asset - good and fast service is essential for us. 02
Stenca Light-Weight Panel Stenca Light-Weight Panel is a very exclusive and high quality hard core panel system. It is an innovative concept of ultra-light, non-combustible panel material for industrial plants, refineries, shipbuilding and offshore use. The panels offer a considerable weight saving over similar bulkheads, because it consists of a calcium silicate core with very low weight. Full comply with the requirements of Marine Equipment Directive (MED). Likewise, the panels are produced in accordance with the requirements of international conventions SOLAS and with Resolution A754 (18) of International Maritime Organization (IMO). Can be used for several purposes like internal fire protection and are ideal as ceiling- and wall panels, or they can be used as fire blast walls indoors and outdoors. The panels have also noise reduction capabilities. Light-Weight Panels are made of calcium silicate plates with different surfaces, which are pressed on a sandwich element. The core material has a density of only 290 kg/ m 3, which is about half as much as comparable non-combustible panel material. The panels can be supplied with decorative surfaces, such as laminate, aluminium, stainless or galvanized steel etc., according to the thickness of the panel and the demanded characteristics. Material verification Type Thickness Weight/m2 Weight/m2 Surface Standard incl. surface excl. surface incl. surface size/mm B-15 T&G 22,0 mm 6 kg 9,28 kg Laminate 2400 x 600 A-60 T&G 53,4 mm 15 kg 26 kg steel 2400 x 580 03
DATA OF Stenca Light-Weight Panels Surfaces B15 Panel is a very light fire protection panel for bulkhead. On each side there can be applied high pressure laminate (HPL) with thickness from 0,8 mm to 1,2 mm, which comply fully with the requirements of Marine Equipment Directive (MED). A60 Panel is a very thin and light fire protection panel for bulkhead and deck. It is pre-bonded with steel on two sides with thickness from 0,6 mm to 0,8 mm. On request the panels can also be processed to customer requirements, e.g. decorative HPL laminates, paper, glass tissue, veneers, plywood, steel sheets or aluminium sheets. Dimension Other panel sizes can be made on customer request. Handling and storage Stored dry, shielded from sun, chill and water. During the handling and working process of the panels, particular attention is required to the edges and to the corners of the single panel. The panel has to maintain in plain position, horizontal and well supported, to avoid flexion. Single panel must stand in straight position for avoiding structural damages - also in the installation phase. Production of panels The core consists of calcium silicate. The material is produced of plates in different thicknesses at one production plant, and is afterwards send to the panel production plant. Here the panels are being prepared for the gluing process. The surfaces are glued on the panels on a specially gluing process system, which insures the surfaces and panel are fitted perfectly together, which makes the panels very strong. Panel fixing and connection Installation of the panels has to be done on site. The panels have to be mounted in top and bottom profiles. Panels with tong and groove (T&G) shall be glued together along the sides with an adhesive, to ensure a closely and fire safe jointing. 04
Technical DATA Light-Weight Panels Specification Thickness of core material mm B15: 20,4 mm a60: 52 Composition mm 0,6-1,2 + core + 0,6-1,2 Standard Dimension mm B15: 2400 x 1200 mm A60: 2400 x 580 Weight core material kg/m 3 290 ± 10 % BENDING RESISTANCE UNI EN 310:1994 Bending Resistance ƒm(n/mm 2 ) 17,5 (HPL 0,8 mm) ELASTIC MODULUS UNI EN 310:1994 Elastic Modulus em(n/mm 2 ) 3780 (HPL 0,8 mm) THERMAL PROPERTIES EN 12667 Thermal Conductivity W/(m*K) 0,0791 (HPL 0,8 mm) Thermal Resistance (m 2 K)/W 0,292 (HPL 0,8 mm) SOUND INSULATION UNI EN ISO 717-1 Airborne sound level Rw db 24 (HPL 0,8 mm) DImEnSIONAL TOLERANCES Thickness mm ± 3 % Width mm :1000=±1 ; 1000+2000=±1,5 ; >2000=±2 05
Technical DATA Light-Weight Panels COMPRESSIVE RESISTANCE ASTM 2559 D 905-98 Compression Rm (dan/cm2) 19,5 ± 10 % SURFACE TRACTION EN 1607 / EN 28510 Traction Rm (dan/cm2) 2,2 3,90 (HPL 0,8 mm) Peeling F.Adh (N/mm) 0.020 0,030 (HPL 0,8 mm) WATER ABSORPTION UNI EN 317:1994 Swelling 0,1 % ( HPL 0,8 mm) CORE HUMiDITY CONTENT Inside factory 1,5 ± 10 % (Thickness core 19,6 mm) FIRE RESISTANCE CLASS SOLAS 74 as Amended : Regulation II-2/3.4 IMO RES. 61 (67) (FTP Code) IMO MSC/Cirs 1120 B-15 & A60 All products are certified in accordance with international regulations and ISO standards, like they are marked with wheel mark after IMO standards. The panels are likewise PH neutral and comply with all environmental requirements. 06
COLD Heat Fire INsulation Accommodation Advising denmark Stenca Trading A/S Svendborgvej 15 9220 Aalborg Mail info@stenca.dk Tel. +45 9632 4810 NORWAY Stenca Trading AS Forusbeen 80 4033 Stavanger Mail office@stenca.no Tel. +47 917 77 438