What You Should Have Received Upon opening your software package, ensure that you have the following items: FliteStar Program CD-ROM (with Serial Number stickers) FliteStar Electronic Chart Data (NavData ) CD-ROM FliteStar Quick Start Guide Save the program CD! You must have this CD and the associated Serial Number to reinstall the program on a new machine! NavData revisions contain all program updates, but do not include the entire program. If anything is missing, please call Jeppesen Customer Service. For more detailed information about FliteStar, view the help file by clicking Help > Help Topics in FliteStar. Installation Procedures Before installing the software, you must have administrative permissions on your computer, otherwise the software will not function correctly. To use FliteStar, install the FliteStar program and Electronic Chart Data from the CDs provided in this kit. The software must be registered, or activated, within 30 days of loading the software onto your system. Administrative Permissions Before installing FliteStar, verify that the permissions are set so individual users have access to full use of FliteStar. Administrative permissions are required for the initial installation of FliteStar, and any program updates that might become available electronically or with the CD update. You do not need administrative permissions to update navigational data. If you are trying to install FliteStar on a corporate computer, please contact your network administrator for administrative permission. FliteStar Program CD Insert the Program CD into your computer CD-ROM drive. If the Setup program does not start automatically, browse to your computer CD-ROM drive and double-click setup.exe. To install the FliteStar program on your computer, follow these steps: 1. In the Welcome dialog box, click Next. 2. Read the license agreement, and then click Yes to accept the terms. 3. In the Pilot Information dialog box, enter your name and the 16-character or alphanumeric serial number, and then click Next. 4. Select the path to install FliteStar, and then click Next. It is recommended that you use the default folder or a location where other Jeppesen programs are installed. If you use a different drive or folder, click Browse and type the path or browse to the desired folder. 5. Select a program folder and click Next. 6. Review the installation summary and click Next to begin the installation. The installation may take a few minutes to complete. 7. After the program files install, select the appropriate check boxes to place the FliteStar icon on your desktop, and read the latest information. Click Finish. If your computer requires a reboot, do so before starting the next procedure. Installing Electronic Chart Data To receive FliteStar program updates and Jeppesen aeronautical data, follow these steps: 1. Insert the ECD Disc into the CD-ROM drive. 2. In the Welcome dialog box, click Next. 1
3. Review the installation summary and click Next to begin the installation. The installation may take a few minutes to complete. 4. Follow the remaining screens to finish the installation. Check the expiration date of the data on your CD s to determine if you need to update your data immediately through the Internet. Activating your Software When you open FliteStar, the Activation Wizard launches and guides you through the activation process. Read the information on the first screen and either click Next to activate the program or click Start Program (30 days) to postpone the activation process and open the program. You have 30 days to activate FliteStar. After 30 days, only the Activation Wizard opens, and the programs are disabled until the activation is complete. Updating the Programs After 30 days of the initial install, you must have a subscription to update your data. Depending on your coverage and FliteStar version (VFR, IFR, Corporate), updates are available upon request, 3 times a year, and every 56 and 28 days. Most subscriptions allow you to electronically update your program and enroute data using the UpdateClient. You must be connected to the Internet and have a valid FliteStar serial number. If you are using a proxy server, please follow the instructions in the help file to properly configure the software to communicate to the update server. There is a large amount of data to download and the time it takes depends on your subscription coverage and connection speed. Follow these steps to update the data through the Internet: 1. Connect to the Internet. 2. In FliteStar, click File > Check for Updates. 3. If a dialog box appears with a list of Jeppesen products, select FliteStar and click OK. 4. After the system displays your program s information (serial number, site key, and site code), click Next. 5. Select each item you want to update and click OK to begin the download. After the program and navigational data have been packaged and transferred, an installer program launches and copies all of the data to the appropriate directories. If FliteStar is open, the installer will attempt to close it. NOTE to Vista users: When updating online, after the data is downloaded, Microsoft's Vista User Account Control requires permission for the update Setup to open. The UAC permissions dialog times out after two minutes. If you doesn't respond within the two minutes, UAC closes the update Setup. You must manually restart the Setup and click through the UAC dialog to continue. Working with RoutePacks Think of a RoutePack as a briefcase containing flight information for a complete trip. A RoutePack can include one or more routes, airports, terminal charts (if JeppView is installed), and waypoints along the route. The information in the RoutePack can be used with any RoutePack compatible program, such as JeppView and FliteDeck. You can save RoutePack files to a USB memory device, email, or move them to other computers. The RoutePack Wizard Use the full planning aspects delivered by the RoutePack Wizard to create a new RoutePack and a route. To do this, click the RoutePack Wizard on the Quick Bar in FliteStar. The RoutePack Wizard guides you through the entire process of creating a RoutePack and a route. Refer to the Help files for more options on creating RoutePacks. 2
Saving a RoutePack Save your RoutePacks the same as you would any other file by selecting the RoutePack in the RoutePack List and doing one of the following: Click File > Save. Click the Save button in the Standard toolbar. Press CTRL+S. Choose Yes if you are prompted to save a RoutePack on exit. You can also save a RoutePack file under a different name by right-clicking the RoutePack from the RoutePack List and choosing Save As. The following are possible default location of where the RoutePacks are stored depending on your setup and operating system: C:\Users\[User Profile]\Jeppesen\Common\RoutePack (Windows Vista) C:\Program Files\Jeppesen\Common\RoutePack (Windows 2000 and XP) C:\Jeppesen\Common\RoutePack (Windows 2000 and XP) If you installed FliteStar in a folder other than the default path, the default RoutePack folder also changes. Regardless of where the program is installed, you may choose to save RoutePacks in a different folder, such as My Documents. You need to know where these files are saved if you want to copy them to another machine. Unloading a RoutePack After you load a RoutePack in FliteStar, it stays there until you unload it, even if you exit and reenter the program. When you load a RoutePack, any currently-loaded RoutePacks stay in the RoutePack List in addition to the newly-loaded RoutePack. To unload a RoutePack, select the RoutePack name on the RoutePack List and click File > Unload. Opening a RoutePack After you have unloaded a RoutePack, you can access them by clicking File > Load. Browse and select a RoutePack from the default folder or from the location you designated. 3
System Requirements The following system requirements were set up to give you the most out of your FliteStar software. Although the program might run on systems that do not meet these requirements, Jeppesen cannot guarantee that the program will run properly unless the system meets these requirements. MINIMUM RECOMMENDED Desktop, notebook, or tablet PC Microsoft XP SP2, or XP Tablet PC SP2 Edition Pentium 2 or equivalent (>1 GHz) PC Type Operating System (English Only) Desktop, notebook, or tablet PC Microsoft XP SP3, or XP Tablet PC SP3 Edition V.9.4.7 and later - Windows Vista 32- and 64-bit: Home Basic, Home Premium, Business, Enterprise, and Ultimate Editions V.9.4.7 and later - Windows 7 32- and 64-bit Processor Pentium 3, Pentium 4 or equivalent (2 GHz or faster) Display 800 x 600 display 24-bit color display 1280 x 1024 display 24-bit color display RAM 1GB USA - 48 States: 190MB Europe: 180 MB Worldwide: 5GB 32MB video card 2GB Free Hard Drive Space Higher than the minimum requirement Graphics Processor 64MB video card 8x CD-ROM drive I/O Interfaces 24x CD-ROM drive Internet Connection (program updates, enroute data, and weather downloads) 56K dial-up (Transfer time may be effected by the amount of data being downloaded.) Internet Explorer 5.0 or higher Broadband Internet Connection Internet Explorer 7.0 or higher Printer (Optional) 600dpi 600dpi, 6 pages per minute, color 4
Jeppesen 55 Inverness Drive East Englewood, CO 80112-5498 USA Jeppesen GmbH Frankfurter Str. 233 63263 Neu-Isenburg Germany Jeppesen Technical Support Western Hemisphere 800.732.2800 or 303.328.4587 Email: pctechsupport@jeppesen.com Eastern Hemisphere + 49 6102 508270 Email: fra.pctechsup@jeppesen.com Jeppesen Sales & Service Western Hemisphere 800.621.5377 or 303.799.9090 Email: captain@jeppesen.com Eastern Hemisphere +49 6102 5070 Email: fra-services@jeppesen.com For additional information, including product FAQ and troubleshooting tips, please visit the Jeppesen website at: www.jeppesen.com and click the Customer Support link at the top of the page. www.jeppesen.com 5