Training catalog ABB Distribution Automation training 2016 Relay schools, application, product, and automation communications training
The value of training Distribution Automation Training Center (DATC) Located in sunny Coral Springs, Florida, ABB s DATC offers factory and on-site training for our Relion products and applications. Our goal is to help our customers achieve long product life, improve safety and reduce downtime. We work in partnership with you to address your specific needs and ensure that your personnel are more satisfied with their jobs thanks to deeper knowledge of equipment and service procedures. Our training features: highly qualified professionals with a wealth of experience in relay and technical support training material created to include theory and hands-on exercises expertise in IEEE, IEC 61850, DNP 3.0 and Modbus communication standards Training offered The following types of training are offered: Classroom training is offered at the DATC in Coral Springs, FL. Onsite product training is available to customers at the customer s location. These classes are upon request only. Customized workshops are designed to provide a deeper understaning of the principles of protection and control, each class is targeted to address a specific topic, including feeder, transformer, and generator protection. The classes are structured for 1 2 hour segments and can be held onsite or at one of ABB s facilities in your area. Contact your FES representative to schedule. 2 ABB Distribution Protection and Control Training 2016 Training catalog
Training catalog ABB Distribution Protection and Control Training 2016 3
Table of contents Relay & automation schools Symmetrical components and fault analysis Page 5 Fundamentals of protection relaying of substation Page 6 Power systems protection & coordination Page 7 Relay product training Electromechanical relay and Flexitest switches Page 8 Relion RER620 recloser control IED Page 9 Relion 615 series and tools training Page 10 Relion 615R series and tools training Page 11 Relion 620 series and tools training Page 12 Relion 605 series and tools training Page 14 COM600 communication gateway configuration Page 15 IEC 61850 for protection and control Page 16 OVR recloser and PCD control application Page 18 GridShield recloser and RER620 applications Page 19 Course schedule Page 20 Registration information Page 22 Webinars Page 23 4 ABB Distribution Protection and Control Training 2016 Training catalog
Symmetrical components and fault analysis Objective The course discusses the symmetrical component representation of various power system components, and comprehensively analyzes faults. Relay segments covered: Per unit system Introduction to symmetrical components System faults Fault calculations Sequence network modeling: Generator Sequence network modeling: Transformer Sequence network modeling: Overhead lines Participants learn Mathematical fault analysis techniques Fault calculations and system stability for single-phase and multiple-phase fault scenarios Understand real case examples Rapid calculation of how your system will behave under abnormal conditions Participant profile Engineers and senior level technicians who wish to reacquaint themselves with vector mathematics and fault analysis computations Prerequisites A general knowledge of basic electrical engineering is recommended, as well as Elementary Phaser Mathematics, Mathematical Matrix Manipulation, and Power System Basics What to bring Only scientific calculator Additional course details This class will be held Feburary 16-19, 8:00 am - 5:00 pm each day with the last day ending at noon. Training catalog ABB Distribution Protection and Control Training 2016 5
Fundametals of protection relaying of substation Objectives The major contents of this fundamentals course are the protection schemes in distribution substations and applications. (3.5 days) Introduction to Fundamentals Power systems fundamentals Elements of feeder protection Busbar protection Transformer protection Examples/calcultions, and hands-on Review of fundamentals I Line protection Capacitor bank protection Generator protection Substation automation Hands-on/calcuation/examples Participants learn The basic concepts of protective relaying to the advanced topics of generation protection Understand key design consideration and operations Criteria used to select protective relay settings Participant profile Designers, engineers and technicians involved with design and development of distirbution lines, substation, as well as anyone involved in protective relay selection and application. Prerequisites Knowledge of basic electrical engineering is required. Basic relay school is highly recommended. Additional course details This class will be held August 16-19, 8:00 am - 5:00 pm each day with the last day ending at noon. 6 ABB Distribution Protection and Control Training 2016 Training catalog
Power systems protection & coordination Objectives The major contents of this course covers the fundamental aspects of power system protection and coordination. The basic philosophy and introduction to application problems are also addressed. (3.5 days) Power systems Power system fundamentals Fault calucation Protection systems introduction Selection of protection relays Transformer, busbar and arc protection Review of power systems I Motor protection Overheard line protection Generator protection Feeder protection Relay coordination Participants learn Students will learn the basis upon which the selection of protection systems is made for the different components of the power system (lines, transformers, motors, generators, and busbars) as well as the basic criteria for relay settings and coordination. Review of fault calculations and protective device calculations Coordination of overcurrent protective devices Participant profile Electrical engineers, relay engineers, and senior technicians. Involved in protection and coordination for distribution lines, transmission lines and substations. Prerequisites Knowledge of basic electrical engineering is required. Basic relay school is highly recommended. Additional course details This class will be held May 10-13, 8:00 am- 5:00 pm each day with the last day ending at noon. Training catalog ABB Distribution Protection and Control Training 2016 7
Electromechanical relays & Flexitest switches Objectives This two-day course is designed for participants to become proficient in application, installation, operation, maintenance, and testing of ABB electromechanical relays and FT switches. Our mission is to train a new and changing power utility workforce to become experienced in these products using personalized, handson training. Training segments include Current non-directional and current directional Distance Current differential Auxiliary and annunciator Under/over voltage Power directional Under/over frequency FT Switches Participants Learn and Perform Hands- On Applications: learn to apply relays for various combinations of fault protection Settings: set up relay functions for your specific application Maintenance: maintain relays to perform for a lifetime Calibration: calibrate relays to precision accuracy Acceptance Testing: test relays to verify acceptance criteria and characteristics Relay construction: learn cylinder unit, induction disc element, transformer, compensator, polar unit and auxiliary relay components Troubleshooting techniques: use relay tools to reduce operating costs and minimize downtime Participant profile Relay Engineers, Technicians, and Operators Prerequisites Knowledge of/experience with Protective Relaying and use of electrical equipment What to bring Laptop is recommended Additional course details This class will be held February 22-23 and August 22-23, 8:00 am - 5:00 pm each day. 8 ABB Distribution Protection and Control Training 2016 Training catalog
Relion RER620 recloser control IED Objectives This free, two-day course is designed for engineers and technicians to become proficient in installation, operation and configuration of the RER620 IED controller for Recloser Gridshield. Topics covered Using the RER620 LHMI, WebHMI and COM600 RER620 settings over WebHMI and Parameter Setting Tool Using the Graphical Display Editor to customize RER620 HMI Configuring the RER620 recloser application Relay protection applications Relay logic design with Application Configuration Tool DNP3 point remapping using the Communication Management Tool Understanding DNP3 objects, classes, variations, events and deadbands Participants learn and perform hands-on RER620 settings using the WebHMIand PCM600 RER620 Application Configuration Tool for customized logic DNP3 serial and TCP communications Participant profile Service and Lineman technicians, System engineers, maintenance engineers and persons who want to learn to operate reclosers Additional course details This class will be held November 1-2, 8:00 am - 5:00 pm each day. Prerequisites Basic knowledge of protection relays and the electrical network to be controlled. Training catalog ABB Distribution Protection and Control Training 2016 9
Relion 615 series and tools training Objectives This free, two-day Relion course is designed for engineers and technicians to become proficient in installation, operation and configuration of 615 series IEDs, tools and software. for customized logic Course breakdown: Technician Relion Course (REF-615 LIN), Operations Relion Course (REF- 615-OPE) and Engineering Relion Course (REF-615-ENG) Topics covered Using the REF615 LHMI, WebHMI and COM600 REF615 settings over WebHMI and Parameter Setting Tool Presentation of PCM600 Tool Configuring the REF615 Feeder application Relay protection applications Relay logic design with Application Configuration Tool (ACT) DNP3 point remapping using the Communication Management Tool Understanding DNP3 objects, classes, variations, events and deadbands GOOSE Engineering Participants learn and perform hands-on REF615 quick start up guide overview REF615 settings using the WebHMI and PCM600 REF615 application configuration tool Participant profile Service and Lineman technicians, System engineers, maintenance engineers. Prerequisites Knowledge of distribution operation and protection principles What to bring You will need to bring your own laptop that meets the following requirements: 2 GB of RAM or higher 30 GB of Hard Drive Space Windows XP or Windows 7 operating system Internet Explorer 7 or higher Additional course details This class will be held February 24-25 and November 3-4, 8:00 am- 5:00 pm each day. 10 ABB Distribution Protection and Control Training 2016 Training catalog
Relion 615R series and tools training Objectives This free, one-day Relion course is designed to provide customers with a 19 rack mount version of the REF615 feeder IED as well as an easy, cost effective upgrade of the DPU2000R. for customized logic Course breakdown: Technician Relion Course (REF-615 LIN), Operations Relion Course (REF- 615-OPE) and Engineering Relion Course (REF-615-ENG) Topics covered Using the REF615 LHMI, WebHMI and COM600 REF615 settings over WebHMI and Parameter Setting Tool Presentation of PCM600 Tool Configuring the REF615 Feeder application Relay protection applications Relay logic design with Application Configuration Tool (ACT) DNP3 point remapping using the Communication Management Tool Understanding DNP3 objects, classes, variations, events and deadbands GOOSE Engineering Participants learn and perform hands-on REF615 quick start up guide overview REF615 settings using the WebHMI and PCM600 REF615 application configuration tool Participant profile Service and Lineman technicians, System engineers, maintenance engineers. Prerequisites Knowledge of distribution operation and protection principles What to bring You will need to bring your own laptop that meets the following requirements: 2 GB of RAM or higher 30 GB of Hard Drive Space Windows XP or Windows 7 operating system Internet Explorer 7 or higher Additional course details This class will be held February 26, 8:00 am- 5:00 pm. Training catalog ABB Distribution Protection and Control Training 2016 11
Relion 620 series and tools training Objectives This free, two-day Relion course is designed for engineers and technicians to become proficient in installation, operation and configuration of 620 series IEDs. Topics covered Introduction to 620 series IEDs (family features) Local HMI, Web HMI interfaces Control configuration 620 series special features: multipage SLD, load profile recorder, programmable push buttons GOOSE engineering Participants learn and perform hands-on Perform basic operations through available interfaces (LHMI, WHMI). Manage the relay settings Manage disturbances Modify an application configuration (functions, signals, I/O) Engineer the GOOSE communication What to bring You will need to bring your own laptop that meets the following requirements: 2 GB of RAM or higher 30 GB of Hard Drive Space Windows XP or Windows 7 operating system Internet Explorer 7 or higher ASE2000 DNP3 key Additional course details This class will be held August 24-25, 8:00 am- 5:00 pm each day. Prerequisites Basic knowledge of protection relays and the electrical network to be controlled. Participant profile System engineers, maintenance engineers and persons who want to learn to operate and engineer 620 series of relays. 12 ABB Distribution Protection and Control Training 2016 Training catalog
Training catalog ABB Distribution Protection and Control Training 2016 13
Relion 605 series and tools training Objectives The aim of this course is to familiarize participants with the operation, setting and engineering of Relion 605 series IEDs by using REF601 feeder protection relay and REJ603 Self-powered feeder protection relay. Participants learn and perform hands-on: Perform all the basic operations from the local HMI Read and clear events, fault records and alarms Manage the relay settings from LHMI Handle Relion 605 series relays Training segments include: Introduction to REF601, REJ601 and REJ603 relay Hardware, features and application of Relion 605 series relays Local HMI interface Setting of the relay Testing the relay along with sensor/ct Reading the events/fault records Hands on training of Relion 605 series relays Participant profile System engineers and technical personnel who want to learn operation and engineering of Relion 630 series relays. What to bring You will need to bring your own laptop that meets the following requirements: 2 GB of RAM or higher 30 GB of hard drive space Windows XP or Windows 7 operating system Internet Explorer 7 or higher Additional course details This class will be held August 26, 8:00 am-5:00 pm. Prerequisites Participants shall have a good knowledge of protection relays and the electrical network to be controlled. 14 ABB Distribution Protection and Control Training 2016 Training catalog
COM600 Distribution Grid Automation Objectives This two-day course was designed for engineers and technicians to become proficient in installation, operation and configuration of the COM600 gateway/ HMI. Our mission is to train a new and changing power utility work force to become experienced in ABB s substation automation COM600 series product using personalized, hands-on training. Training segments include: Hardware identification and configuration Operating the COM600, both locally and remotely License upgrades Configuration of master and slave communications Configuration of the HMI Implementation of the advanced features of the COM600 Participants learn and perform hands-on: Where and how to apply COM600 in various applications How to set up the COM600 How to set up communication networks for your specific application How to configure and apply HMI functions How to configure and apply functions utilizing ABB connectivity packages and templates Upload and download configurations to/from the COM600 How to use event and alarm lists How to use the Web HMI How to use advanced features of the COM600 such as historical data storage and IEC61131-3 active logic programming (emphasis will be placed on the implementation of the Fault Detection Isolation and Restoration (FDIR) algorithm unique to the COM600) Troubleshooting techniques Product highlights COM600: Gateway and/or HMI Communication protocols including IEC61850, DNP and Modbus Simple configuration and commissioning Bottom up engineering approach Additional course details This class will be held May 16-17 and November 7-8, 8:00 am- 5:00 pm each day. Training catalog ABB Distribution Protection and Control Training 2016 15
IEC 61850 for protection and control Objectives This two-and-a-half day course is designed to give attendees the tools necessary to understand, engineer, and deployprotection and control schemes based on IEC 61850. Topics covered Overview of IEC61850 protocol suite Information on IEC61850 7-3 Hands-on configuration practive on ABB Relion relay monitoring and decoding of IEC61850 Prerequisites Basic knowledge of protection relays and the electrical network. Participant profile Relay, protection, control, communication, and automation engineers. Additional course details This class will be held May 18-20 and November 9-11, 8:00 am - 5:00 pm each day with the last day ending at noon. 16 ABB Distribution Protection and Control Training 2016 Training catalog
Training catalog ABB Distribution Protection and Control Training 2016 17
OVR recloser and PCD control application Objectives This two-day training course is designed for participants to become profi cient in application, installation, operation, maintenance, testing and commissioning of PCD relays and OVR reclosers. Topics covered: Receiving, handling, and storage Installation Recloser assemblies Using AFSuite software Communications, programming, and troubleshooting Recloser operation and testing the PCD control Maintenance and adjustments Participants learn and perform hands-on: Functionality of the settings Fast and efficient techniques for application How to minimize downtime How to optimize availability of resources How to maximize performance How to quickly and effectively test the control To decrease commissioning time withadvanced features Proper setup for event capture andfault record recordingand templates Participant profile Relay engineers, protection engineers, technicians, and operators Prerequisites Knowledge of distribution operation and protection principles What to bring You will need to bring your own laptop that meets the following requirements: 256 MB of RAM or higher 30 MB of hard drive space Windows NT 4.0, Windows 98 2nd Edition, Windows XP or Windows 2000 operating system Internet Explorer 5.50 or higher AFSuite RS-232 serial port or USB port and USB to serial port converter RS-232 Null modem cable 18 ABB Distribution Protection and Control Training 2016 Training catalog
GridShield recloser and RER620 applications Objectives This three-day hands-on training course is designed for participants to become proficient in the application, installation, operation, maintenance, testing and commissioning of RER620 relays and GridShield reclosers. Topics covered Introduction of the GridShield recloser; high and low voltage cabinets Using the RER620 LHMI, WebHMI and COM600 RER620 settings over WebHMI and Parameter Setting Tool Using the Graphical Display Editor to customize RER620 HMI Configuring the RER620 recloser application Relay protection applications Relay logic design with Application Configuration Tool DNP3 point remapping using the Communication Management Tool Understanding DNP3 objects, classes, variations, events and deadbands Participants learn and perform hands-on RER620 settings using the WebHMI and PCM600 RER620 Application Configuration Tool for customized logic DNP3 serial and TCP communications Participant profile Relay engineers, protection engineers, Technicians, operators, dispatchers, SCADA and communication engineers Prerequisites Knowledge of distribution operation and protection principles What to bring You will need to bring your own laptop that meets the following requirements: 2 GB of RAM or higher 30 GB of hard drive space Windows XP or Windows 7 operating system Internet Explorer 7 or higher ASE2000 DNP3 key Training catalog ABB Distribution Protection and Control Training 2016 19
2016 course schedule Course # Course name Price Location Date (USD) * Relay school training SCH001 Symmetrical Components and Fault $1,500 Coral Springs, FL Feb. 16-19 Analysis SCH002 Fundamentals of Protection Relaying of $1,500 Coral Springs, FL Aug. 16-19 Substation SCH003 Power Systems Protection & Coordination $1,500 Coral Springs, FL May 10-13 RPT006 Electromechanical relays and FT switches $1,500 Coral Springs, FL Feb. 22-23 Aug. 22-23 Substation communication RPT009 COM600 Configuration $1,500 Coral Springs, FL May 16-17 Nov. 7-8 SCH005 IEC 61850 for Protection & Control $1,500 Coral Springs, FL May 18-20 Nov. 9-11 Relays 615 -Gen Relion 615 series Free Coral Springs, FL Feb. 24-25 Nov. 3-4 615R - Gen Relion 615R series Free Coral Springs, FL Feb. 26 620 - Gen Relion 620 series Free Coral Springs, FL Aug. 24-25 RER620-Gen Relion RER620 series Free Coral Springs, FL Nov. 1-2 605-Gen Relion 605 series Free Coral Springs, FL Aug. 26 20 ABB Distribution Protection and Control Training 2016 Training catalog
Course # Course name Price (USD) * Recloser training GSR001 OVR001 GridShield Recloser and RER620 Applications Recloser and Recloser Control (OVR, PCD, AFSuite) More courses will be added to the 2015 schedule. Check online for the most current information. *A multi-session 10% discount is granted on the total tuition fee of the same student registering to more than one class during the same calendar year. Please contact the hosting ABB facility for more information: Location $1,000 Lake Mary, FL Date Feb. 16-18 May 3-5 Aug. 2-4 Nov. 1-3 $1,000 Lake Mary, FL May 20-21 Oct. 14-15 Lake Mary, FL Phone: +1 800 929 7947 ext. 5 +1 407 732 2000 ext. 2510 Email: customer.service.group@ us.abb.com Coral Springs, FL Toll Free: +1 800 222 1946 Email: allschools@us.abb.com Disclaimers Relay school classes Need a minimum of 6 participants to confirm this class Confirmation of this course will be completed once requirement is met Relion product training classes Minimum of 6 participants to confirm class Confirmation of this course will be completed once requirement is met. Special offer $0.00 per course is limited and does not include any other additional discounts. General: ABB has the right to cancel the class if above requirements are not met. We are not responsible for travel expenses of any of the participants if class is cancelled We will confirm all classes at least 2 weeks prior of the date of the course. Training catalog ABB Distribution Protection and Control Training 2016 21
Registration information Please register for courses by visiting us online. Please make reservations at least four weeks before the start of the course, as we are only able to accept a limited number of participants on each course. We accept bookings in the order they arrive. To find course dates, please refer to the course descriptions or course schedule. If you have any questions please email Monique Johson at monique.r.johnson@us.abb.com. Confirmation, facilities and accommodations A confirmation will be returned upon receipt of your application with specific details about the hours, and location. We ve negotiated the best rates available in each area during the ABB training program, please contact us for hotel information. Cancellation and notice If the course is cancelled or postponed, you will be informed at least one week prior to the course start. We reserve the right to postpone or cancel courses. If you need to cancel, please send an email to allschools@us.abb.com as soon as possible, but no later than two weeks prior to course start. The course fee will not be reimbursed to anyone canceling with less than two weeks notice from the scheduled course date. Course certificate Each participant will receive a course certificate upon the completion of the course. Instructors and staff Training is conducted by our professional instructors who are specialized in delivering the latest information and knowledge about the subject at hand. On-site and customized customer training On-site and customized customer training sessions are offered upon request. We will gladly arrange courses at any agreed location. Our training staff will be happy to assist in the planning and organization of your on-site or customized training requirements. Arrangements may also be made by contacting the Customer Support Department. Course descriptions Course descriptions concern standard courses only. For tailor-made courses please call +1 954-825-0633. ABB reserves the right to make changes to standard courses without notice. 22 ABB Distribution Protection and Control Training 2016 Training catalog
Webinars Visit us online to view the 2016 ABB Protective Relay School webinar calendar or to access recorded webinar archives from previous webinar events. Training catalog ABB Distribution Protection and Control Training 2016 23
Contact us ABB Inc. Distribution Automation 4300 Coral Ridge Drive Coral Springs, FL 33065 Phone: +1 954-752-6700 Toll Free: +1 800 523-2620 Email: allschools@ us.abb.com All sales are subject to ABB Inc. General Terms and Conditions of Sale. While every effort has been made to assure accuracy, the information in this document is subject to change without notice. Copyright 2008, 2014 ABB Inc. All rights reserved. 1VAD3801-TA Rev V November 2015 ABB Inc. Outdoor Products 655 Century Point Lake Mary, Florida 32746 Phone: +1 407-732-2000 ext. 2510 +1 800 929 7947 ext. 5 Email: customer.service. group@us.abb. com www.abb.com/ substationautomation www.abb.com/ mediumvoltage www.abb.us/mvservice