The Garador Range Price List

The Garador Range Price List st October 205 Garage Doors, Front Entrance Doors and Automatic Operators

GARADOR General Information All prices are quoted in Sterling, ex-works and exclusive of VAT. Please ensure that you order the correct size door to fit your opening as we are unable to accept the return of incorrectly ordered goods. Please contact Garador on 0935 443722 if you need assistance in calculating the correct size. A comprehensive range of the less common accessories and all spare parts are available either online or ask for a current spares price list if required. Since the company s policy is one of continuous improvement of its products, we reserve the right to make any alterations in design, manufacture or price. All business is governed by the Company s Standard Conditions and this document does not form any part of any contract with the company and statements contained in it should not be construed as representations or warranties. For more information please visit www.garador.co.uk 2

GARADOR Contents Steel Panel Doors 4 Guardian Range 6 Design Range 8 PVC Panel Doors 20 GRP Premier Panel Doors 22 Timber Panel Doors 30 Steel and Timber Garage Side Doors 40 Steel and Timber Side-hinged Doors 44 Steel Panel Doors - Specifications 50 Steel Sectional Garage Doors 54 Automation and Accessories 64 GaraRoll Roller Doors 70 FrontGuard Entrance Doors 74 User Information / Care 84 Warranty 86 Extracts from DHF consumer advice 88 3

GARADOR Steel Panel Doors Steel Panel Doors Surface High quality powder or foil coated finish. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Colours White (RAL 906) and Terra Brown (RAL 8028) as standard, other optional colours of Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007), Window Grey (RAL 7040) and Titan Metallic (CH 703) are available on an approximate 4 week lead-time. The Wentwood, Sherwood, Georgian, Beaumont and Cathedral doors are available in Golden Oak and Rosewood foil coated timber effect with a solid chassis colour - and frame where applicable to match. These doors are also on an approximate 4 week lead-time. Only available on Design Range doors. Handle Black handle as standard, optional handles are available (this option is not available on Wentwood or Sherwood single doors). Doors can be supplied undrilled and without handle and locking mechanism for use with electric operator (not available on Wentwood or Sherwood doors). This option makes the door purpose made and will therefore increase lead-time, please specify clearly on order. Packaging White, brown and timber effect doors are supplied unwrapped as standard with optional poly-wrapping available. Coloured doors are supplied wrapped and - also - include a touch up stick as standard. Side-hinged doors are provided wrapped as standard. Stock availability Prices in bold show stock doors on a standard lead-time (approx week) in white unless specified. All other prices relate to non-stock doors on an approximately two to four week lead-time. Brown (RAL 8028 only) finished doors available ex-stock in 7066 and 7070 in Horizon, Carlton, Georgian, Beaumont and Cathedral. All other sizes in brown are non stock doors. Canopy gearing Canopy Gearing is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable Gearing Retractable Gearing is available for all single and double doors providing a reliable and affordable gearing solution, with tracks running back into the garage. 4

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Horizon Carlton Ascot Windsor C R C R C R C R 6660 984 x 830 505 546 574 65 - - - - 6663 984 x 905 505 546 574 65 - - - - 6664 984 x 93 505 546 574 65 - - - - 6666 984 x 98 479 520 546 587 - - - - 6670 984 x 236 479 520 546 587 - - - - 6064 2084 x 93 489 530 545 586 - - - - 6066 2084 x 98 500 54 545 586 - - - - 6070 2084 x 236 58 559 556 597 - - - - 7060 234 x 830 59 560 589 630 - - - - 7063 234 x 905 59 560 589 630 - - - - 7064 234 x 93 494 535 548 589 - - - - 7066 234 x 98 458 499 530 57 558 599 653 694 7070 234 x 236 50 542 552 593 623 664 674 75 7076 234 x 2286-640 - 685 - - - - 764 270 x 93 494 535 548 589 - - - - 766 270 x 98 458 499 530 57 558 599 653 694 770 270 x 236 50 542 552 593 623 664 674 75 776 270 x 2286-709 - 745 - - - - 7364 2224 x 93 538 579 573 64 - - - - 7366 2224 x 98 54 582 576 67 - - - - 7370 2224 x 236 549 590 583 624 - - - - 7564 2259 x 93 534 575 579 620 - - - - 7566 2259 x 98 538 579 579 620 64 682 699 740 7570 2259 x 236 63 654 652 693 727 768 757 798 7576 2259 x 2286-762 - 745 - - - - 7664 2284 x 93 538 579 595 636 - - - - 7666 2284 x 98 538 579 595 636 64 682 699 740 7670 2284 x 236 64 655 652 693 77 758 757 798 7676 2284 x 2286-766 - 745 - - - - 8064 2439 x 93 62 662 705 746 - - - - 8066 2439 x 98 62 662 705 746 7 752 80 85 8070 2439 x 236 634 675 728 769 737 778 834 875 8076 2439 x 2286-746 - 8 - - - - 8666 2590 x 98-78 - 808 - - - - 8670 2590 x 236-743 - 842 - - - - 8676 2590 x 2286-820 - 95 - - - - 9066 2744 x 98-857 - 868 - - - - 9070 2744 x 236-902 - 95 - - - - 9076 2744 x 2286-936 - 95 - - - - 066 3049 x 98-03 - 977 - - - - 070 3049 x 236-024 - 987 - - - - Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Stock doors also available in Jet Black (based on RAL 9005). For further options please see page 5. 5

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Sutton Chevron Salisbury C R C R C R 6660 984 x 830 - - - - - - 6663 984 x 905 - - - - - - 6664 984 x 93 - - - - - - 6666 984 x 98 - - 565 606 - - 6670 984 x 236 - - 565 606 - - 6064 2084 x 93 - - - - - - 6066 2084 x 98 - - - - - - 6070 2084 x 236 - - - - - - 7060 234 x 830 - - - - - - 7063 234 x 905 - - - - - - 7064 234 x 93 599 640 599 640 93 954 7066 234 x 98 565 606 565 606 93 954 7070 234 x 236 604 645 604 645 923 964 7076 234 x 2286 - - - - - - 764 270 x 93 - - - - - - 766 270 x 98 - - - - - - 770 270 x 236 - - - - - - 776 270 x 2286 - - - - - - 7364 2224 x 93 - - - - - - 7366 2224 x 98 - - - - - - 7370 2224 x 236 - - - - - - 7564 2259 x 93 657 698 657 698 948 989 7566 2259 x 98 657 698 657 698 948 989 7570 2259 x 236 723 764 723 764 958 999 7576 2259 x 2286 - - - - - - 7664 2284 x 93 664 705 664 705 948 989 7666 2284 x 98 630 67 630 67 948 989 7670 2284 x 236 696 737 696 737 958 999 7676 2284 x 2286 - - - - - - 8064 2439 x 93 732 773 - - 006 047 8066 2439 x 98 732 773 - - 006 047 8070 2439 x 236 744 785 - - 06 057 8076 2439 x 2286 - - - - - - 8666 2590 x 98 - - - - - - 8670 2590 x 236 - - - - - - 8676 2590 x 2286 - - - - - - 9066 2744 x 98 - - - - - - 9070 2744 x 236 - - - - - - 9076 2744 x 2286 - - - - - - 066 3049 x 98 - - - - - - 070 3049 x 236 - - - - - - Salisbury windows ( ) come as white or brown as standard, colour match windows are available to order as an option. Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. Stock doors also available in Jet Black (based on RAL 9005). For further options please see page 5. 6

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows C R C R C R C R 6660 984 x 830 - - - - - - - - 6663 984 x 905 - - - - - - - - 6664 984 x 93 702 743 702 743 702 743 956 997 6666 984 x 98 665 706 665 706 665 706 960 00 6670 984 x 236 675 76 675 76 675 76 930 97 6064 2084 x 93 672 73 672 73 672 73 927 968 6066 2084 x 98 673 74 673 74 673 74 928 969 6070 2084 x 236 722 763 722 763 722 763 976 07 7060 234 x 830 - - - - - - - - 7063 234 x 905 - - - - - - - - 7064 234 x 93 673 74 673 74 673 74 928 969 7066 234 x 98 673 74 673 74 673 74 928 969 7070 234 x 236 73 754 73 754 73 754 967 008 7076 234 x 2286-848 - 848-848 - 02 764 270 x 93 673 74 673 74 673 74 928 969 766 270 x 98 673 74 673 74 673 74 928 969 770 270 x 236 73 754 73 754 73 754 967 008 776 270 x 2286-99 - 99-99 - 73 7364 2224 x 93 748 789 748 789 748 789 003 044 7366 2224 x 98 753 794 753 794 753 794 007 048 7370 2224 x 236 758 799 758 799 758 799 02 053 7564 2259 x 93 748 789 748 789 748 789 003 044 7566 2259 x 98 748 789 748 789 748 789 003 044 7570 2259 x 236 863 904 863 904 863 904 8 59 7576 2259 x 2286-047 - 047-047 - 30 7664 2284 x 93 748 789 748 789 748 789 003 044 7666 2284 x 98 748 789 748 789 748 789 003 044 7670 2284 x 236 863 904 863 904 863 904 8 59 7676 2284 x 2286-047 - 047-047 - 30 8064 2439 x 93 887 928 887 928 887 928 42 83 8066 2439 x 98 887 928 887 928 887 928 42 83 8070 2439 x 236 924 965 924 965 924 965 78 29 8076 2439 x 2286-028 - 028-028 - 323 8666 2590 x 98-946 - 946-946 - 24 8670 2590 x 236-956 - 956-956 - 252 8676 2590 x 2286-060 - 060-060 - 355 9066 2744 x 98-96 - 96-96 - 257 9070 2744 x 236-972 - 972-972 - 267 9076 2744 x 2286-076 - 076-076 - 37 066 3049 x 98-998 - 998-998 - 293 070 3049 x 236-08 - 08-08 - 34 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to four week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 5. 7

GARADOR Steel Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Wentwood Sherwood Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect C R C R C R C R C R 6660 984 x 830 - - - - - - - - - - 6663 984 x 905 - - - - - - - - - - 6664 984 x 93 - - - - 806 847 806 847 806 847 6666 984 x 98 - - - - 806 847 806 847 806 847 6670 984 x 236 - - - - 845 886 845 886 845 886 6064 2084 x 93 - - - - 806 847 806 847 806 847 6066 2084 x 98 - - - - 806 847 806 847 806 847 6070 2084 x 236 - - - - 845 886 845 886 845 886 7060 234 x 830 - - - - - - - - - - 7063 234 x 905 - - - - - - - - - - 7064 234 x 93 - - - - 806 847 806 847 806 847 7066 234 x 98 590 63 683 724 806 847 806 847 806 847 7070 234 x 236 655 696 705 746 845 886 845 886 845 886 7076 234 x 2286 - - - - - 937-937 - 937 764 270 x 93 - - - - 806 847 806 847 806 847 766 270 x 98 - - - - 806 847 806 847 806 847 770 270 x 236 - - - - 845 886 845 886 845 886 776 270 x 2286 - - - - - 937-937 - 937 7364 2224 x 93 - - - - 806 847 806 847 806 847 7366 2224 x 98 - - - - 806 847 806 847 806 847 7370 2224 x 236 - - - - 845 886 845 886 845 886 7564 2259 x 93 - - - - 896 937 896 937 896 937 7566 2259 x 98 67 72 729 770 896 937 896 937 896 937 7570 2259 x 236 747 788 787 828 896 937 896 937 896 937 7576 2259 x 2286 - - - - - 090-090 - 090 7664 2284 x 93 - - - - 896 937 896 937 896 937 7666 2284 x 98 67 72 729 770 896 937 896 937 896 937 7670 2284 x 236 747 788 787 828 039 080 039 080 039 080 7676 2284 x 2286 - - - - - 30-30 - 30 8064 2439 x 93 - - - - 056 097 056 097 056 097 8066 2439 x 98 74 782 840 88 056 097 056 097 056 097 8070 2439 x 236 768 809 866 907 093 34 093 34 093 34 8076 2439 x 2286 - - - - - 84-84 - 84 8666 2590 x 98 - - - - - 07-07 - 07 8670 2590 x 236 - - - - - 7-7 - 7 8676 2590 x 2286 - - - - - 68-68 - 68 9066 2744 x 98 - - - - - 20-20 - 20 9070 2744 x 236 - - - - - 30-30 - 30 9076 2744 x 2286 - - - - - 8-8 - 8 066 3049 x 98 - - - - - 5-5 - 5 070 3049 x 236 - - - - - 6-6 - 6 Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a three to four week lead-time. For further options please see page 5. 8

GARADOR Steel Panel Doors Purpose-made Sizes Single door Internal Timber (mm x mm) Horizon Carlton Georgian Beaumont Cathedral C R C R C R C R C R 830-930 x 830-930 668 709 693 734 - - - - - - 830-930 x 93-98 692 733 79 760 - - - - - - 830-930 x 982-236 745 786 76 802 - - - - - - 830-930 x 237-2286 - 839-867 - - - - - - 830-930 x 2287-2439 - 900-924 - - - - - - 93-984 x 830-930 672 73 702 743 - - - - - - 93-984 x 93-98 698 739 725 766 - - - - - - 93-984 x 982-236 740 78 766 807 - - - - - - 93-984 x 237-2286 - 839-867 - - - - - - 93-984 x 2287-2439 - 900-924 - - - - - - 985-234 x 830-930 698 739 724 765 - - - - - - 985-234 x 93-98 740 78 766 807 054 095 054 095 054 095 985-234 x 982-236 799 840 85 856 9 60 9 60 9 60 985-234 x 237-2286 - 900-924 - 229-229 - 229 985-234 x 2287-2439 - 956-974 - 86-86 - 86 235-2284 x 830-930 740 78 756 797 - - - - - - 235-2284 x 93-98 799 840 85 856 29 70 29 70 29 70 235-2284 x 982-236 849 890 876 97 29 70 29 70 29 70 235-2284 x 237-2286 - 956-974 - 29-29 - 29 235-2284 x 2287-2439 - 07-042 - 388-388 - 388 2285-2499 x 830-930 799 840 825 866 - - - - - - 2285-2499 x 93-98 849 890 876 97 98 239 98 239 98 239 2285-2499 x 982-236 856 897 924 965 29 260 29 260 29 260 2285-2499 x 237-2286 - 977-998 - 296-296 - 296 2285-2499 x 2287-2439 - 08-029 - 348-348 - 348 2500-2590 x 830-930 - 95-932 - - - - - - 2500-2590 x 93-98 - 956-974 - 285-285 - 285 2500-2590 x 982-236 - 08-08 - 307-307 - 307 2500-2590 x 237-2286 - 029-029 - 337-337 - 337 2500-2590 x 2287-2439 - 09-09 - 379-379 - 379 259-2722 x 830-930 - 972-972 - - - - - - 259-2722 x 93-98 - 03-03 - 290-290 - 290 259-2722 x 982-236 - 084-084 - 353-353 - 353 259-2722 x 237-2286 - 5-5 - 394-394 - 394 259-2722 x 2287-2439 - 227-227 - - - - - - 2723-3049 x 830-930 - - - 84 - - - - - - 2723-3049 x 93-98 - - - 226-379 - 379-379 2723-3049 x 982-236 - - - 352-43 - 43-43 Canopy gear only available up to 2439 wide. For further options please see page 5. 9

GARADOR Steel Panel Doors Purpose-made Sizes Single door Internal Timber (mm x mm) Beaumont with Windows 2 Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect C R C R C R C R 830-930 x 830-930 - - - - - - - - 830-930 x 93-98 - - - - - - - - 830-930 x 982-236 - - - - - - - - 830-930 x 237-2286 - - - - - - - - 830-930 x 2287-2439 - - - - - - - - 93-984 x 830-930 - - - - - - - - 93-984 x 93-98 - - - - - - - - 93-984 x 982-236 - - - - - - - - 93-984 x 237-2286 - - - - - - - - 93-984 x 2287-2439 - - - - - - - - 985-234 x 830-930 - - - - - - - - 985-234 x 93-98 308 349 96 237 96 237 96 237 985-234 x 982-236 374 45 262 303 262 303 262 303 985-234 x 237-2286 - 484-372 - 372-372 985-234 x 2287-2439 - 44-44 - 44-44 235-2284 x 830-930 - - - - - - - - 235-2284 x 93-98 384 425 262 303 262 303 262 303 235-2284 x 982-236 384 425 262 303 262 303 262 303 235-2284 x 237-2286 - 474-605 - 605-605 235-2284 x 2287-2439 - 643-520 - 520-520 2285-2499 x 830-930 - - - - - - - - 2285-2499 x 93-98 453 494 32 362 32 362 32 362 2285-2499 x 982-236 473 54 34 382 34 382 34 382 2285-2499 x 237-2286 - 55-49 - 49-49 2285-2499 x 2287-2439 - 603-470 - 470-470 2500-2590 x 830-930 - - - - - - - - 2500-2590 x 93-98 - 540-397 - 397-397 2500-2590 x 982-236 - 56-49 - 49-49 2500-2590 x 237-2286 - 592-449 - 449-449 2500-2590 x 2287-2439 - 633-49 - 49-49 259-2722 x 830-930 - - - - - - - - 259-2722 x 93-98 - 545-397 - 397-397 259-2722 x 982-236 - 608-460 - 460-460 259-2722 x 237-2286 - 649-50 - 50-50 259-2722 x 2287-2439 - - - - - - - - 2723-3049 x 830-930 - - - - - - - - 2723-3049 x 93-98 - 633-48 - 48-48 2723-3049 x 982-236 - 685-533 - 533-533 Canopy gear only available up to 2439 wide. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 5. 0

GARADOR Steel Panel Doors Standard Sizes Double door Size Code Internal Timber (mm x mm) Horizon Carlton Chevron Salisbury R R R R 076 3049 x 2286 30 30 - - 66 3354 x 98 226 226 - - 70 3354 x 236 236 236 - - 76 3354 x 2286 268 372 - - 266 3659 x 98 288 288 - - 270 3659 x 236 298 298 - - 276 3659 x 2286 390 390 - - 366 3964 x 98 402 402 - - 370 3964 x 236 42 42 - - 376 3964 x 2286 548 548 - - 466 4269 x 98 350 350 774 870 470 4269 x 236 350 350 774 870 566 4574 x 98 454 454 - - 570 4574 x 236 476 476 - - 666 4879 x 98 538 538 - - 670 4879 x 236 558 558 - - Double door Size Code Internal Timber (mm x mm) Ascot Windsor Wentwood Sherwood R R R R 076 3049 x 2286 - - - - 66 3354 x 98 - - - - 70 3354 x 236 - - - - 76 3354 x 2286 - - - - 266 3659 x 98 - - - - 270 3659 x 236 - - - - 276 3659 x 2286 - - - - 366 3964 x 98 - - - - 370 3964 x 236 - - - - 376 3964 x 2286 - - - - 466 4269 x 98 426 426 704 745 470 4269 x 236 426 426 704 745 566 4574 x 98 - - - - 570 4574 x 236 - - - - 666 4879 x 98 - - - - 670 4879 x 236 - - - - Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock white standard doors on a two to three week lead-time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 5.

GARADOR Steel Panel Doors Standard Sizes Double door Size Code Internal Timber (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows R R R R 076 3049 x 2286 30 30 30 69 66 3354 x 98 288 288 288 67 70 3354 x 236 288 288 288 67 76 3354 x 2286 372 392 392 775 266 3659 x 98 372 372 372 753 270 3659 x 236 372 372 372 753 276 3659 x 2286 434 434 434 86 366 3964 x 98 43 43 43 795 370 3964 x 236 43 43 43 795 376 3964 x 2286 434 434 434 795 466 4269 x 98 454 454 454 963 470 4269 x 236 454 454 454 963 566 4574 x 98 579 579 579 96 570 4574 x 236 579 579 579 96 666 4879 x 98 662 662 662 2045 670 4879 x 236 662 662 662 2045 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Double door Size Code Internal Timber (mm x mm) Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect R R R 076 3049 x 2286 426 426 426 66 3354 x 98 405 405 405 70 3354 x 236 405 405 405 76 3354 x 2286 507 507 507 266 3659 x 98 487 487 487 270 3659 x 236 487 487 487 276 3659 x 2286 568 568 568 366 3964 x 98 568 568 568 370 3964 x 236 568 568 568 376 3964 x 2286 589 589 589 466 4269 x 98 578 578 578 470 4269 x 236 578 578 578 566 4574 x 98 7 7 7 570 4574 x 236 7 7 7 666 4879 x 98 833 833 833 670 4879 x 236 833 833 833 Prices in bold show stock doors on a one-week lead-time. All other prices are non-stock standard doors on a two to three week lead-time, timber effect finishes are on a four to six week lead time. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 5. 2

GARADOR Steel Panel Doors Purpose-made Sizes Double door Internal Timber (mm x mm) Carlton Horizon R R 2745-3049 x 237-2286 57-2745-3049 x 2287-2439 - - 3050-3354 x 886-98 434 454 3050-3354 x 982-236 444 465 3050-3354 x 237-2286 579 600 3050-3354 x 2287-2439 - - 3355-3659 x 886-98 476 496 3355-3659 x 982-236 506 527 3355-3659 x 237-2286 579 600 3355-3659 x 2287-2439 - - 3660-3967 x 886-98 60 63 3660-3967 x 982-236 642 662 3660-3967 x 237-2286 756 777 3660-3967 x 2287-2439 - - 3968-4269 x 886-98 558 579 3968-4269 x 982-236 579 600 3968-4269 x 237-2286 - - 3968-4269 x 2287-2439 - - 4270-5000 x 886-98 725 745 4270-5000 x 982-236 766 787 Double door Internal Timber (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows R R R R 2745-3049 x 237-2286 57 57 57 779 2745-3049 x 2287-2439 - - - - 3050-3354 x 93-98 496 496 496 879 3050-3354 x 982-236 57 57 57 899 3050-3354 x 237-2286 600 600 600 983 3050-3354 x 2287-2439 - - - 96 3355-3659 x 93-98 579 579 579 96 3355-3659 x 982-236 62 62 62 2003 3355-3659 x 237-2286 642 642 642 2023 3355-3659 x 2287-2439 - - - - 3660-3967 x 93-98 62 62 62 229 3660-3967 x 982-236 642 642 642 25 3660-3967 x 237-2286 662 662 662 27 3660-3967 x 2287-2439 - - - - 3968-4269 x 93-98 662 662 662 27 3968-4269 x 982-236 662 662 662 27 3968-4269 x 237-2286 - - - - 3968-4269 x 2287-2439 - - - - 4270-5000 x 93-98 870 870 870 2507 4270-5000 x 982-236 870 870 870 2507 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if clear or crystal panes. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 5. 3

GARADOR Steel Panel Doors Purpose-made Sizes Double door Internal Timber (mm x mm) Georgian Timber Effect Beaumont Timber Effect Cathedral Timber Effect R R R 2745-3049 x 237-2286 670 670 670 2745-3049 x 2287-2439 - - - 3050-3354 x 886-98 649 649 649 3050-3354 x 982-236 670 670 670 3050-3354 x 237-2286 752 752 752 3050-3354 x 2287-2439 - - - 3355-3659 x 886-98 742 742 742 3355-3659 x 982-236 784 784 784 3355-3659 x 237-2286 804 804 804 3355-3659 x 2287-2439 - - - 3660-3967 x 886-98 794 794 794 3660-3967 x 982-236 85 85 85 3660-3967 x 237-2286 835 835 835 3660-3967 x 2287-2439 - - - 3968-4269 x 886-98 845 845 845 3968-4269 x 982-236 845 845 845 3968-4269 x 237-2286 - - - 3968-4269 x 2287-2439 - - - 4270-5000 x 886-98 2053 2053 2053 4270-5000 x 982-236 2053 2053 2053 Timber effect finishes are on a four to six week lead time. For further options please see page 5. 4

GARADOR Steel Panel Doors Options Options Single doors add Double doors add Factory pre-framed standard single doors 02 - Steel frame for standard double doors - 53 Factory pre-framed purpose-made single doors (framed retractable purpose made doors require a 4 week lead-time) 2 - Steel frame for purpose made double doors - 68 Additional Lock Kit, C-type/ R-type (fitted onto door) 45 - Retractable plus gear available on 93, 98 and 236 mm high doors up to 2744 mm wide 29 - For powder-coated doors : Brown (RAL 8028) 28 55 For powder-coated doors : Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040). Coloured window frames to match door colour Beaumont doors (price per window). Beaumont doors up to 3049 wide = 4 windows, between 3050 to 3964 = 6 windows, between 3965 to 4860 = 8 windows and over 4860 = 0 windows. 99 56 26 each 26 each Coloured window frames to match door colour Salisbury doors (price per door) 24 248 Black window panes for Salisbury doors (price per door) 26 5 Poly-wrapping (available on white and brown) 9 35 Diecast metal handles: brass effect, chrome effect and white 26 26 Bottom weatherseal, 2405 mm length (suitable for gaps up to 5 mm between the door and the floor level) Bottom weatherseal, 3000 mm length (suitable for gaps up to 5 mm between the door and the floor level) 29 29 33 33 Please state coloured windows required on order. Coloured Beaumont with windows and Salisbury doors are supplied with white or brown window frames as standard. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. 5

GARADOR Guardian Range Guardian Range New Secured By Design certified Up & Over doors These doors have been tested to the STS 202 Security Technical Specification and achieve Secured By Design accreditation. New lock body protection, anti-snap cylinder, high security bracing and improved lock security make these doors even more secure. Information Guardian Range doors come with a pre-fitted steel frame and cannot be fitted to a custom made timber frame. There is no mechanism to unlock Guardian range doors from the inside. Guardian Range doors are not suitable for automation. Window panes on Secured by Design Salisbury doors are black non-translucent. Stock availability All doors from the Guardian Range have an expected lead-time of four to six weeks. Single door - standard sizes Size Code Internal Timber (mm x mm) Horizon Carlton Salisbury C R C R C R 6660 984 x 830 855 896 925 966 - - 6663 984 x 905 855 896 925 966 - - 6664 984 x 93 855 896 925 966 - - 6666 984 x 98 829 870 896 937 - - 6064 2084 x 93 839 880 896 937 - - 6066 2084 x 98 85 892 896 937 - - 6070 2084 x 236 869 90 906 947 - - 7060 234 x 830 870 9 939 980 - - 7063 234 x 905 870 9 939 980 - - 7064 234 x 93 844 885 898 939 264 305 7066 234 x 98 787 828 880 92 264 305 7070 234 x 236 852 893 902 943 273 34 764 270 x 93 89 932 936 977 - - 766 270 x 98 787 828 880 92 - - 770 270 x 236 906 947 964 005 - - 7364 2224 x 93 888 929 924 965 - - 7366 2224 x 98 89 932 927 968 - - 7370 2224 x 236 899 940 933 974 - - 7564 2259 x 93 96 957 954 995 298 339 7566 2259 x 98 888 929 930 97 298 339 7570 2259 x 236 963 004 002 043 308 349 7664 2284 x 93 888 929 944 985 298 339 7666 2284 x 98 888 929 944 985 298 339 7670 2284 x 236 964 005 002 043 308 349 8064 2439 x 93 - - - 096-397 8066 2439 x 98 - - - 096-397 8070 2439 x 236 - - - 9-407 8666 2590 x 98 - - - 58 - - 8670 2590 x 236 - - - 93 - - 9066 2744 x 98 - - - 28 - - 9070 2744 x 236 - - - 265 - - 6

GARADOR Guardian Range Single door - purpose-made sizes Internal Timber (mm x mm) Horizon Carlton C R C R 985-234 x 830-930 048 089 074 5 985-234 x 93-98 090 3 6 57 985-234 x 982-236 50 9 65 206 235-2284 x 830-930 090 3 06 47 235-2284 x 93-98 50 9 50 9 235-2284 x 982-236 99 240 226 267 2285-2499 x 830-930 - 9-26 2285-2499 x 93-98 - 240-267 2285-2499 x 982-236 - 237-35 2500-2590 x 830-930 - 282-282 2500-2590 x 93-98 - 324-324 2500-2590 x 982-236 - 369-369 259-2722 x 830-930 - 322-322 259-2722 x 93-98 - 364-364 259-2722 x 982-236 - 434-434 Options for single doors add For powder-coated doors: Brown (RAL 8028) 28 For powder coated doors: Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040). 99 Coloured window frames on Salisbury to match door colour 24 Retractable plus gear (available up to 80 (2439) wide but in standard heights only - 64 (93), 66 (98) and 70 (234)) 29 Secured by Design is an association focusing on the design of more secure homes and commercial properties. Secured by Design is owned by the ACPO (Association of Chief Police Officers) and awards the Secured by Design status to products that pass their extensive testing procedures. 7

GARADOR Design Range Design Range Surface and finish The Series 00 Design Range skins are built from four horizontal skins, whilst the Series 200 range is constructed from three vertical skins. Stainless steel elements on Garador design range doors are manufactured from high grade 2mm thick steel with a brushed finish. The series 00 and 200 design range doors are also available without stainless steel elements. On Design Range doors a choice of any standard colour comes free of charge, please see page 9 for a choice of the 9 standard RAL colours available. The Titan Metallic colour is a structured metallic finish is only available on Design Range doors. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle and Packaging A new perfectly matched handle offers a quality feel everytime you open the door. Design Range doors come wrapped as standard. Single door Size Code Internal Timber (mm x mm) 00 0 02 03 04 C R C R C R C R C R 7066 234 x 98 779 820 935 976 935 976 935 976 935 976 7070 234 x 236 83 872 987 028 987 028 987 028 987 028 7566 2259 x 98 857 898 03 054 03 054 03 054 03 054 7570 2259 x 236 909 950 065 06 065 06 065 06 065 06 7666 2284 x 98 873 94 028 069 028 069 028 069 028 069 7670 2284 x 236 925 966 080 2 080 2 080 2 080 2 8066 2439 x 98 987 028 42 83 42 83 42 83 42 83 8070 2439 x 236 039 080 94 235 94 235 94 235 94 235 Single door Size Code Internal Timber (mm x mm) 05 06 07 08 09 C R C R C R C R C R 7066 234 x 98 935 976 935 976 935 976 935 976 935 976 7070 234 x 236 987 028 987 028 987 028 987 028 987 028 7566 2259 x 98 03 054 03 054 03 054 03 054 03 054 7570 2259 x 236 065 06 065 06 065 06 065 06 065 06 7666 2284 x 98 028 069 028 069 028 069 028 069 028 069 7670 2284 x 236 080 2 080 2 080 2 080 2 080 2 8066 2439 x 98 42 83 42 83 42 83 42 83 42 83 8070 2439 x 236 94 235 94 235 94 235 94 235 94 235 8

GARADOR Design Range Single door Size Code Internal Timber (mm x mm) 200 20 202 203 204 C R C R C R C R C R 7066 234 x 98 779 820 935 976 935 976 935 976 935 976 7070 234 x 236 83 872 987 028 987 028 987 028 987 028 7566 2259 x 98 857 898 03 054 03 054 03 054 03 054 7570 2259 x 236 909 950 065 06 065 06 065 06 065 06 7666 2284 x 98 873 94 028 069 028 069 028 069 028 069 7670 2284 x 236 925 966 080 2 080 2 080 2 080 2 8066 2439 x 98 987 028 42 83 42 83 42 83 42 83 8070 2439 x 236 039 080 94 235 94 235 94 235 94 235 Single door Size Code Internal Timber (mm x mm) 205 207 20 2 22 C R C R C R C R C R 7066 234 x 98 935 976 935 976 935 976 935 976 935 976 7070 234 x 236 987 028 987 028 987 028 987 028 987 028 7566 2259 x 98 03 054 03 054 03 054 03 054 03 054 7570 2259 x 236 065 06 065 06 065 06 065 06 065 06 7666 2284 x 98 028 069 028 069 028 069 028 069 028 069 7670 2284 x 236 080 2 080 2 080 2 080 2 080 2 8066 2439 x 98 42 83 42 83 42 83 42 83 42 83 8070 2439 x 236 94 235 94 235 94 235 94 235 94 235 Options for single doors add Factory pre-fitted steel frame 02 Additional Lock Kit, C-type/ R-type (fitted onto door) 45 Retractable plus gear 29 Titan metallic paint finish (exclusive to Design Range doors) 5 Please specify on order if you would like the design elements on the right or the left hand side of the door panel (viewed from outside). Colour options on Design Range doors are free of charge. Available options are: White (RAL 906), Terra Brown (RAL 8028), Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040). Design Range doors come wrapped as standard 9

GARADOR PVC Panel Doors PVC Panel Doors Surface Low gloss white finish panels fixed as an infill into a rigid box section chassis in White (RAL 906). Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle Black handle as standard, optional handles are available. Doors can be supplied without handle holes but will increase the lead time. Packaging These doors are provided with a film on the front face to protect the door, this must be removed when fitted. Stock availability Standard sized doors are ex-stock on a one-week lead-time. Purpose made sizes on a 4 week lead-time. Canopy gearing Canopy Gearing is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable Gearing Retractable Gearing is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 20

GARADOR PVC Panel Doors Single door - standard sizes Size Code Internal Timber (mm x mm) Chatsworth Sherborne C R C R 7066 234 x 98 760 80 760 80 7070 234 x 236 760 80 760 80 7566 2259 x 98 82 862 82 862 7570 2259 x 236 82 862 82 862 7666 2284 x 98 827 868 827 868 7670 2284 x 236 827 868 827 868 8066 2439 x 98 893 934 893 934 8070 2439 x 236 893 934 893 934 Single door - purpose made sizes Internal Timber (mm x mm) Chatsworth Sherborne C R C R 2084-234 x 98-236 967 008 967 008 235-2284 x 98-236 035 076 035 076 2285-2439 x 98-236 0 42 0 42 Options for single doors add Factory pre-framed standard door size finished in white to match door chassis 02 Factory pre-framed purpose made doors 2 Retractable plus gear option on 98 mm and 236 mm high doors 29 Diecast metal handles: brass effect, chrome effect and white 26 Poly-wrapping 9 Bottom weatherseal, 2405 mm length (suitable for gaps up to 5 mm between the door and the floor level) 29 Bottom weatherseal, 3000 mm length (suitable for gaps up to 5 mm between the door and the floor level) 33 Additional Lock Kit, C-type / R-type (fitted onto door) 45 2

GARADOR GRP Premier Panel Doors GRP Premier Panel Doors Surface High gloss or woodgrain finish depending on door style. GRP Premier doors are constructed as an infill panel and are fixed into a rigid box section chassis. The infill has a flow coat to the inside face for a smoother finish and reduced translucency. Doors without flow coat are available. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Colours Ashurst, Arden and Stamford are available in Gloss White finish only. All other doors are available in the following range of woodgrain colours: Ebony, Matt white, Cherry Oak, Light Oak, Golden Oak, Rosewood, Honey, Golden Brown and Dark Oak. Due to the production processes door colours may vary. Should you require matching doors please specify on your order. Chassis colour - White (RAL 906) for Gloss White Doors, Black (RAL 9005) for Ebony coloured doors and Brown (RAL 8028) for all other timber effect GRP doors. Handle Black handle and base plate as standard, optional handles available. Doors can be supplied undrilled and without handle and locking mechanism for use with electric operator. This must be requested at the time of order. Certain panel configurations may only be available without handle or locking, therefore only suitable for electric operation (consult Garador sales office for exact details). Packaging Supplied with front surface protection as standard. Stock availability All GRP doors are made to order and thus require an approximate lead-time of 4 weeks. Canopy gearing Canopy Gearing is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable Gearing Retractable Gearing is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 22

GARADOR GRP Premier Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Arden Ashurst Kenmore Stamford Penshurst C R C R C R C R C R 7066 234 x 98 56 602 56 602 594 635 639 680 69 732 7070 234 x 236 56 602 56 602 594 635 639 680 69 732 7566 2259 x 98 633 674 633 674 677 78 707 748 823 864 7570 2259 x 236 633 674 633 674 677 78 707 748 823 864 7666 2284 x 98 647 688 647 688 69 732 725 766 840 88 7670 2284 x 236 647 688 647 688 69 732 725 766 840 88 8066 2439 x 98 798 839 798 839 88 859 867 908 959 2000 8070 2439 x 236 798 839 798 839 88 859 867 908 959 2000 9066 2744 x 98-2005 - 2005-205 - 2068 - - 9070 2744 x 236-2005 - 2005-205 - 2068 - - 066 3049 x 98-2202 - 2202-2272 - 2298-2409 070 3049 x 236-2202 - 2202-2272 - 2298-2409 Doors only available with electric operation (Handle and Locking not available). Single door Size Code Internal Timber (mm x mm) Hartfield 2 Lingfield Swinton Hazelbury Derwent C R C R C R C R C R 7066 234 x 98 69 732 69 732 69 732 82 862 869 90 7070 234 x 236 69 732 69 732 69 732 82 862 869 90 7566 2259 x 98 823 864 823 864 823 864 923 964 2002 2043 7570 2259 x 236 823 864 823 864 823 864 923 964 2002 2043 7666 2284 x 98 840 88 840 88 840 88 938 979 209 2060 7670 2284 x 236 840 88 840 88 840 88 938 979 209 2060 8066 2439 x 98 - - 959 2000 959 2000 2066 207 236 277 8070 2439 x 236 - - 959 2000 959 2000 2066 207 236 277 9066 2744 x 98 - - - - - - - - - - 9070 2744 x 236 - - - - - - - - - - 066 3049 x 98 - - - - - - - - - - 070 3049 x 236 - - - - - - - - - - 2 Hartfield doors not available in matt white colour option. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 28. 23

GARADOR GRP Premier Panel Doors Purpose-made Sizes Single door Internal Timber (mm x mm) Arden Ashurst 2 Kenmore Stamford Penshurst 3 C R C R C R C R C R Up to 233 x 93-980 - - - - - - - - 867 908 Up to 233 x 98-236 - - 723 764 - - - - 867 908 Up to 233 x 237-2286 - - 978 209 - - - - - 257 234-2439 x 93-980 - - - - - - - - 244 285 234-2439 x 98-236 97 202 97 202 993 2034 2049 2090 244 285 234-2439 x 237-2286 - - - 2335 - - - - - 2482 2440-2590 x 93-980 - - - - - - - - - - 2440-2590 x 98-236 - 2249-2249 - 2296-2367 - - 2440-2590 x 237-2286 - - - 2575 - - - - - - 259-2744 x 93-980 - - - - - - - - - - 259-2744 x 98-236 - 2249-2249 - 2296-234 - - 259-2744 x 237-2286 - - - 2575 - - - - - - 2745-2896 x 93-980 - - - - - - - - - - 2745-2896 x 98-236 - 2443-2443 - 25-2599 - - 2745-2896 x 237-2286 - - - 2792 - - - - - - 2897-3049 x 93-980 - - - - - - - - - 2665 2897-3049 x 98-236 - 2443-2443 - 25-2599 - 2665 2897-3049 x 237-2286 - - - 2752 - - - - - 2975 Doors only available with electric operation (Handle and Locking not available). 2 Ashurst width available from 206 mm. 3 Penshurst width available from 2083 mm. Single door Internal Timber (mm x mm) Hartfield 4 Lingfield Swinton Hazelbury Derwent C R C R C R C R C R Up to 233 x 93-980 - - - - - - - - - - Up to 233 x 98-236 - - - - - - - - - - Up to 233 x 237-2286 - - - - - - - - - - 234-2439 x 93-980 - - - - - - 244 285 - - 234-2439 x 98-236 244 285 244 285 244 285 244 285 2279 2320 234-2439 x 237-2286 - - - - - - - - - - 2440-2590 x 93-980 - - - - - - - - - - 2440-2590 x 98-236 - - - - - - - - - - 2440-2590 x 237-2286 - - - - - - - - - - 259-2744 x 93-980 - - - - - - - - - - 259-2744 x 98-236 - - - - - - - - - - 259-2744 x 237-2286 - - - - - - - - - - 2745-2896 x 93-980 - - - - - - - - - - 2745-2896 x 98-236 - - - - - - - - - - 2745-2896 x 237-2286 - - - - - - - - - - 2897-3049 x 93-980 - - - - - - - - - - 2897-3049 x 98-236 - - - - - - - - - - 2897-3049 x 237-2286 - - - - - - - - - - 4 Hartfield doors not available in matt white colour option and only upto 2286 mm wide. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 28. 24

GARADOR GRP Premier Panel Doors Standard Sizes Double door Size Code Internal Timber (mm x mm) Arden Ashurst Kenmore Penshurst R R R R 66 3354 x 98 2202-2289 24 70 3354 x 236 2202-2289 24 266 3659 x 98 2383-2487 264 270 3659 x 236 2383-2487 264 366 3964 x 98 2560-2688 283 370 3964 x 236 2560-2688 283 466 4269 x 98 2739 2739 2894 304 470 4269 x 236 2739 2739 2894 304 Doors only available with electric operation (Handle and Locking not available). Double door Size Code Internal Timber (mm x mm) Hartfield 2 Stamford Swinton Hazelbury R R R R 66 3354 x 98 - - - - 70 3354 x 236 - - - - 266 3659 x 98 - - - - 270 3659 x 236 - - - - 366 3964 x 98 - - - - 370 3964 x 236 - - - - 466 4269 x 98-3026 3026 373 470 4269 x 236 304 3026 3026 373 Doors only available with electric operation (Handle and Locking not available). 2 Hartfield doors not available in matt white colour option. Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. For further options please see page 28. 25

GARADOR GRP Premier Panel Doors Purpose-made Sizes Double door Internal Timber (mm x mm) Arden Ashurst Kenmore Penshurst R R R R 3050-3355 x 98-236 2352-2449 3574 3050-3355 x 237-2286 - - - 2963 3356-3660 x 98-236 2529-2646 2774 3356-3660 x 237-2286 - - - 387 366-3965 x 98-236 2705-2845 2576 366-3965 x 237-2286 - - - 349 3966-47 x 98-236 2882 2882 2 3036 36 3966-47 x 237-2286 - 336 2-395 48-4269 x 98-236 2882 2882 3036 36 48-4269 x 237-2286 - 336-3638 Doors only available with electric operation (Handle and Locking not available). 2 Only available from 4000 mm. Double door Internal Timber (mm x mm) Stamford Hazelbury R R 3050-3355 x 98-236 - - 3050-3355 x 237-2286 - - 3356-3660 x 98-236 - - 3356-3660 x 237-2286 - - 366-3965 x 98-236 - - 366-3965 x 237-2286 - - 3966-47 x 98-236 384-3966-47 x 237-2286 - - 48-4269 x 98-236 384 323 48-4269 x 237-2286 - - Doors only available with electric operation (Handle and Locking not available). For further options please see page 28. 26

GARADOR GRP Premier Panel Doors Options GRP Window options Additional Cost (Width mm) for standard and purpose-made single doors Stamford Arden Ashurst Kenmore Hazelbury up to 2743 2744-3049 Derwent Semi-translucent, no leading Semi-translucent, diamond leading Semi-translucent, square leading Smoked, no leading Smoked, diamond leading Smoked, square leading Imitation black, sunrise Imitation black, no leading Imitation black, square leading Imitation black, diamond leading Please state window code on order. A A A A A 45 27 no on-cost - B B B B 242 358 Add 94 - C C C C 242 358 Add 94 D D - D D 46 27 no on-cost - E - E E 242 358 Add 94 - F - F F 242 358 Add 94 G - - - - 35 55 - - H H H H 46 27 no on-cost - I I I I 242 358 Add 94 - J J J j 242 358 Add 94 GRP Window options for standard and purpose-made double doors Stamford Arden Ashurst Kenmore Hazelbury Semi-translucent, no leading Semi-translucent, diamond leading Semi-translucent, square leading Smoked, no leading Smoked, diamond leading Smoked, square leading Imitation black, sunrise Imitation black, no leading Imitation black, square leading Imitation black, diamond leading Please state window code on order. Additional Cost (Width mm) 3354-3963 3964-4269 A A A A A 257 29 - B B B B 48 502 - C C C C 48 502 D D - D D 257 29 - E - E E 48 502 - F - F F 48 502 G - - - - 77 0 - H H H H 257 29 - I I I I 48 502 - J J J J 48 502 Please note that doors with windows may have cross bracing or locking rods passing behind the windows depending upon size and gear type. 27

GARADOR GRP Premier Panel Doors Options Options Single doors add Double doors add Factory pre-framed standard single doors 02 - Steel frame for standard double doors - 53 Factory pre-framed purpose-made single doors 2 - Steel frame for purpose-made double doors - 68 Additional Lock Kit, C-type/ R-type (fitted onto door) 45 - Retractable plus gear available on 93, 98 and 236 mm high doors up to 2744 mm wide 29 - Diecast metal handles with matching base plates: brass effect, chrome effect and white 33 33 Door without inside flow-coat deduct 00 deduct 00 28

GARADOR For your Notes 29

GARADOR Timber Panel Doors Timber Panel Doors Surface Timber doors are supplied untreated and require immediate on-site finishing unless fully finished option specified. Timber is a natural material and therefore Garador cannot guarantee to be able to produce matching timber garage doors. Please note: panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations. Handle Black handle and base plate as standard, optional handles available. Doors can be supplied undrilled and without handle and locking mechanism for use with electric operator. Packaging Supplied with front surface protection as standard. Stock availability Timber doors are generally made to order and thus require an approximate lead-time of 4 weeks. Canopy gearing Canopy Gearing is available for all single doors providing a reliable and afforable gearing solution, with no tracks running back into the garage. Retractable Gearing Retractable Gearing is available for all single and double doors providing a reliable and afforable gearing solution, with tracks running back into the garage. 30

GARADOR Timber Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Vertical Cedar Horizontal Cedar Countryman Hampton Chevron Cedar C R C R C R C R C R 7066 234 x 98 232 273 296 337 537 578 537 578 83 872 7070 234 x 236 242 283 306 347 55 592 55 592 86 902 7076 234 x 2286-406 - 478-744 - 744-965 7566 2259 x 98 296 337 363 404 68 659 68 659 954 995 7570 2259 x 236 307 348 376 47 63 672 63 672 964 2005 7666 2284 x 98 296 337 493 534 68 659 68 659 954 995 7670 2284 x 236 307 348 376 47 63 672 63 672 964 2005 7676 2284 x 2286-460 - 534-750 - 750-206 8066 2439 x 98 37 42 443 484 70 75 70 75 209 2060 8070 2439 x 236 382 423 453 494 724 765 724 765 2030 207 8076 2439 x 2286-548 - 625-853 - 853-26 9066 2744 x 98-66 - 698-930 - 930-225 9070 2744 x 236-627 - 709-952 - 952-2284 9076 2744 x 2286-777 - 866-2090 - 2090-2359 066 3049 x 98-87 - 964-280 - 280-2530 070 3049 x 236-889 - 984-299 - 299-2548 Single door Size Code Internal Timber (mm x mm) Barrington Kingsbury Adlington Ashton Rochdale C R C R C R C R C R 7066 234 x 98 563 604 55 592 409 450 83 872 853 894 7070 234 x 236 574 65 562 603 409 450 86 902 864 905 7076 234 x 2286-743 - 728-558 - 965-988 7566 2259 x 98 625 666 63 654 470 5 954 995 98 959 7570 2259 x 236 636 677 624 665 470 5 964 2005 929 970 7666 2284 x 98 625 666 63 654 470 5 954 995 98 959 7670 2284 x 236 636 677 624 665 470 5 964 2005 929 970 7676 2284 x 2286-802 - 788-627 - 206-2026 8066 2439 x 98 682 723 669 70 68 659 209 2060 980 202 8070 2439 x 236 692 733 680 72 68 659 2030 207 997 2038 8076 2439 x 2286-853 - 838-659 - 26-2077 9066 2744 x 98-920 - 856-724 - 225-2266 9070 2744 x 236-936 - 87-724 - 2284-2303 9076 2744 x 2286-2089 - 2026-86 - 2359-2375 066 3049 x 98-273 - 208-865 - 2530-2547 070 3049 x 236-29 - 226-865 - 2548-2565 Ashton and Rochdale doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 39. 3

GARADOR Timber Panel Doors Standard Sizes Single door Size Code Internal Timber (mm x mm) Sandhurst Shaftesbury Grantham Seymour C R C R C R C R 7066 234 x 98 795 836 964 430 934 975 327 368 7070 234 x 236 805 846 964 440 934 975 338 379 7076 234 x 2286-929 - 503 993 034-442 7566 2259 x 98 860 90 027 487 997 038 355 396 7570 2259 x 236 87 92 027 498 997 038 366 407 7666 2284 x 98 860 90 027 487 997 038 355 396 7670 2284 x 236 87 92 027 498 997 038 366 407 7676 2284 x 2286-968 - 554 063 04-463 8066 2439 x 98 922 963 063 50 033 074 379 420 8070 2439 x 236 937 978 063 520 033 074 389 430 8076 2439 x 2286-209 - 566-45 - 476 9066 2744 x 98-278 - 743-74 - 668 9070 2744 x 236-226 - 757-74 - 68 9076 2744 x 2286-2288 - 839-256 - 75 066 3049 x 98-2459 - 96-277 - 882 070 3049 x 236-2477 - 979-277 - 883 Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. Single door Size Code Internal Timber (mm x mm) Tudor Bosworth Wolsey Hinton 2 C R C R C R C R 7066 234 x 98 389 430 407 448 387 428 927 968 7070 234 x 236 399 440 47 458 397 438 938 979 7076 234 x 2286-503 - 52-50 - 2043 7566 2259 x 98 46 457 435 476 44 455 2047 2088 7570 2259 x 236 427 468 446 487 425 466 2058 2099 7666 2284 x 98 46 457 435 476 44 455 2047 2088 7670 2284 x 236 427 468 446 487 425 466 2058 2099 7676 2284 x 2286-524 - 543-522 - 255 8066 2439 x 98 440 48 458 499 438 479 208 249 8070 2439 x 236 45 492 469 50 449 490 220 26 8076 2439 x 2286-537 - 555-535 - 2205 9066 2744 x 98-743 - 762-700 - 238 9070 2744 x 236-757 - 775-73 - 2394 9076 2744 x 2286-839 - 857-783 - 2473 066 3049 x 98-96 - 979-900 - 2690 070 3049 x 236-979 - 997-902 - 2707 2 Hinton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 39. 32

GARADOR Timber Panel Doors Purpose-made Sizes Single door Internal Timber (mm x mm) Vertical Cedar Horizontal Cedar Countryman Hampton C R C R C R C R 930-984 x 93-98 339 380 408 449 876 97 876 97 930-984 x 982-236 349 390 49 460 930 97 930 97 930-984 x 237-2286 - 5-588 - 209-209 930-984 x 2287-2439 - 548-625 - 2243-2243 985-2284 x 93-98 402 443 474 55 978 209 978 209 985-2284 x 982-236 43 454 486 527 2039 2080 2039 2080 985-2284 x 237-2286 - 564-643 - 296-296 985-2284 x 2287-2439 - 600-680 - 2377-2377 2285-2439 x 93-98 476 57 553 594 2005 2046 2005 2046 2285-2439 x 982-236 486 527 563 604 2066 207 2066 207 2285-2439 x 237-2286 - 650 - - - - - - 2285-2439 x 2287-2439 - 73 - - - - - - 2440-2744 x 93-98 - 77 - - - - - - 2440-2744 x 982-236 - 728 - - - - - - 2440-2744 x 237-2286 - 875 - - - - - - 2440-2744 x 2287-2439 - 926 - - - - - - 2745-3049 x 93-98 - 966 - - - - - - 2745-3049 x 982-236 - 985 - - - - - - These doors are not available over 2438 mm wide. Single door Internal Timber (mm x mm) Barrington Kingsbury Adlington C R C R C R 930-984 x 93-98 695 736 683 724 446 487 930-984 x 982-236 706 747 694 735 456 497 930-984 x 237-2286 - 876-860 - 68 930-984 x 2287-2439 - 9-902 - 655 985-2284 x 93-98 757 798 745 786 509 550 985-2284 x 982-236 768 809 756 797 520 56 985-2284 x 237-2286 - 935-920 - 67 985-2284 x 2287-2439 - 97-96 - 707 2285-2439 x 93-98 84 855 80 842 583 624 2285-2439 x 982-236 824 865 82 853 593 634 2285-2439 x 237-2286 - 986-970 76 757 2285-2439 x 2287-2439 - 2036-2026 779 820 2440-2744 x 93-98 - 2053-989 783 824 2440-2744 x 982-236 - 2068-2003 794 835 2440-2744 x 237-2286 - 2222-259 94 982 2440-2744 x 2287-2439 - 2273-220 99 2032 2745-3049 x 93-98 - 2305-2240 2032 2073 2745-3049 x 982-236 - 2324-2258 2050 209 These doors are not available over 2438 mm wide. For further options please see page 39. 33

GARADOR Timber Panel Doors Purpose-made Sizes Single door Internal Timber (mm x mm) Shaftesbury Grantham Seymour C R C R C R 930-984 x 93-98 459 500 225 266 459 500 930-984 x 982-236 470 5 236 277 470 5 930-984 x 237-2286 - 574-340 - 574 930-984 x 2287-2439 - 623-389 - 623 985-2284 x 93-98 488 529 253 294 488 529 985-2284 x 982-236 499 540 265 306 499 540 985-2284 x 237-2286 - 596-362 - 596 985-2284 x 2287-2439 - 644-409 - 644 2285-2439 x 93-98 5 552 277 38 5 552 2285-2439 x 982-236 52 562 287 328 52 562 2285-2439 x 237-2286 - 608-374 - 608 2285-2439 x 2287-2439 - 677-443 - 677 2440-2744 x 93-98 - 800-566 - 800 2440-2744 x 982-236 - 84-579 - 84 2440-2744 x 237-2286 - 884-650 - 884 2440-2744 x 2287-2439 - 935-70 - 935 2745-3049 x 93-98 - 204-780 - 204 2745-3049 x 982-236 - 205-78 - 205 These doors are not available over 2438 mm wide. Single door Internal Timber (mm x mm) Tudor Bosworth Wolsey C R C R C R 930-984 x 93-98 52 562 539 580 59 560 930-984 x 982-236 53 572 550 59 529 570 930-984 x 237-2286 - 635-654 - 633 930-984 x 2287-2439 - 684-703 - 688 985-2284 x 93-98 549 590 567 608 547 588 985-2284 x 982-236 560 60 578 69 558 599 985-2284 x 237-2286 - 657-675 - 655 985-2284 x 2287-2439 - 706-724 - 70 2285-2439 x 93-98 572 63 590 63 570 6 2285-2439 x 982-236 583 624 602 643 58 622 2285-2439 x 237-2286 - 669-687 - 667 2285-2439 x 2287-2439 - 763-78 - 742 2440-2744 x 93-98 - 876-894 - 832 2440-2744 x 982-236 - 889-907 - 845 2440-2744 x 237-2286 - 97-990 - 95 2440-2744 x 2287-2439 - 2022-204 - 966 2745-3049 x 93-98 - 2094-22 - 2032 2745-3049 x 982-236 - 22-229 - 2034 These doors are not available over 2438 mm wide. For further options please see page 39. 34

GARADOR Timber Panel Doors Standard Sizes Double door Size Code Internal Timber (mm x mm) Vertical Cedar Horizontal Cedar Countryman Hampton R R R R 076 3049 x 2286 225 254 275 275 66 3354 x 98 225 255 2722 2722 70 3354 x 236 285 225 278 278 76 3354 x 2286 2362 2394 307 307 266 3659 x 98 2395 2427 303 303 270 3659 x 236 2455 2486 309 309 276 3659 x 2286 2673 2708 3375 3375 366 3964 x 98 2832 287 334 334 370 3964 x 236 292 296 343 343 376 3964 x 2286 370 323 373 373 466 4269 x 98 277 28 344 344 470 4269 x 236 2832 287 350 350 566 4574 x 98 328 37 - - 570 4574 x 236 328 3260 - - 666 4879 x 98 343 3458 - - 670 4879 x 236 3442 3487 - - Double door Size Code Internal Timber (mm x mm) Barrington Kingsbury Adlington Ashton R R R R 076 3049 x 2286 2529 240 2359 2808 66 3354 x 98 2509 2404 234 2724 70 3354 x 236 2569 2464 2373 2784 76 3354 x 2286 2784 2670 257 3020 266 3659 x 98 2793 2688 2563 33 270 3659 x 236 2853 2748 2622 39 276 3659 x 2286 34 302 2859 3484 366 3964 x 98 325 382 304 3672 370 3964 x 236 334 327 394 3763 376 3964 x 2286 363 3556 3472 4095 466 4269 x 98 39 322 3044 363 470 4269 x 236 325 382 304 3672 566 4574 x 98 3547 3502-398 570 4574 x 236 3637 3592-4070 666 4879 x 98 383 3786-43 670 4879 x 236 3862 387-4340 Ashton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 39. 35

GARADOR Timber Panel Doors Standard Sizes Double door Size Code Internal Timber (mm x mm) Rochdale, 2 Sandhurst Shaftesbury R R R 076 3049 x 2286 2972 26 205 66 3354 x 98 2873 2595 2026 70 3354 x 236 2933 2655 2086 76 3354 x 2286 385 2879 2254 266 3659 x 98 3280 2927 2248 270 3659 x 236 334 2987 2308 276 3659 x 2286 3649 3260 252 366 3964 x 98 3822 346 2620 370 3964 x 236 393 3505 2709 376 3964 x 2286 4257 384 2933 466 4269 x 98 3763 3356 2560 470 4269 x 236 3822 346 2620 566 4574 x 98 4260 387 2933 570 4574 x 236 4349 3907 3023 666 4879 x 98 4550 4235 3263 670 4879 x 236 4579 4266 3293 Rochdale and Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. 2 Rochdale doors up to 3659 mm wide will be manufactured with one arch not the two as shown above. Double door Size Code Internal Timber (mm x mm) Grantham Seymour Tudor Wolsey R R R R 076 3049 x 2286 796 203 205 2305 66 3354 x 98 758 967 2026 228 70 3354 x 236 88 2026 2086 234 76 3354 x 2286 958 288 2254 2509 266 3659 x 98 988 229 2248 2503 270 3659 x 236 2048 2278 2308 2563 276 3659 x 2286 2224 248 252 2766 366 3964 x 98 2224 2589 2620 2874 370 3964 x 236 234 2679 2709 2964 376 3964 x 2286 2500 2904 2933 388 466 4269 x 98 265 2529 2560 284 470 4269 x 236 2224 2589 2620 2874 566 4574 x 98 - - 2933 388 570 4574 x 236 - - 3023 3277 666 4879 x 98 - - 3263 358 670 4879 x 236 - - 3293 3547 For further options please see page 39. 36

GARADOR Timber Panel Doors Purpose-made Sizes Double door Internal Timber (mm x mm) Vertical Cedar Horizontal Cedar Countryman Hampton R R R R 2745-3049 x 237-2286 2338 2369 2933 2933 2745-3049 x 2287-2439 2455 2487 308 308 3050-3659 x 93-98 2634 2670 3234 3234 3050-3659 x 982-236 2700 2736 3299 3299 3050-3659 x 237-2286 2940 2979 3602 3602 3050-3659 x 2287-2439 3087 329 3782 3782 3660-4269 x 93-98 323 3257 3832 3832 3660-4269 x 982-236 332 3356 393 393 3660-4269 x 237-2286 3478 3524 427 427 3660-4269 x 2287-2439 3644 3692 4325 4325 4270-5000 x 93-98 3754 3803 - - 4270-5000 x 982-236 3786 3836 - - Double door Internal Timber (mm x mm) Barrington Kingsbury Adlington Ashton R R R R 2745-3049 x 237-2286 2783 2650 2594 3088 2745-3049 x 2287-2439 292 2784 2725 3243 3050-3659 x 93-98 3072 2957 288 3444 3050-3659 x 982-236 338 3023 2884 350 3050-3659 x 237-2286 3424 332 344 3832 3050-3659 x 2287-2439 3596 3478 3302 4025 3660-4269 x 93-98 3674 3599 354 439 3660-4269 x 982-236 3773 3698 362 4237 3660-4269 x 237-2286 3962 3882 3793 4449 3660-4269 x 2287-2439 45 4067 3973 466 4270-5000 x 93-98 425 465-474 4270-5000 x 982-236 4248 498-4774 Ashton doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. For further options please see page 39. 37

GARADOR Timber Panel Doors Purpose-made Sizes Double door Internal Timber (mm x mm) Rochdale, 2 Sandhurst Shaftesbury R R R 2745-3049 x 237-2286 3269 287 2255 2745-3049 x 2287-2439 3433 305 2368 3050-3659 x 93-98 3608 3220 2473 3050-3659 x 982-236 3674 3287 2538 3050-3659 x 237-2286 403 3586 2762 3050-3659 x 2287-2439 424 3765 290 3660-4269 x 93-98 4304 3856 2980 3660-4269 x 982-236 4402 3954 3079 3660-4269 x 237-2286 4622 452 3233 3660-4269 x 2287-2439 4842 4349 3386 4270-5000 x 93-98 5005 4659 3589 4270-5000 x 982-236 5038 469 3622 Rochdale and Sandhurst doors may have cross bracing and/or locking rods behind the windows depending upon the size and gear type. 2 Rochdale doors up to 3659 mm wide will be manufactured with one arch not the two as shown above. Double door Internal Timber (mm x mm) Grantham Seymour Tudor Wolsey R R R R 2745-3049 x 237-2286 975 2235 2255 250 2745-3049 x 2287-2439 2074 2347 2368 2623 3050-3659 x 93-98 286 2440 2473 2728 3050-3659 x 982-236 2252 2506 2538 2793 3050-3659 x 237-2286 2447 2730 2762 307 3050-3659 x 2287-2439 2569 2866 290 355 3660-4269 x 93-98 2545 2947 2980 3235 3660-4269 x 982-236 2644 3045 3079 3333 3660-4269 x 237-2286 2777 398 3233 3487 3660-4269 x 2287-2439 2909 335 3386 364 4270-5000 x 93-98 - - 3589 3843 4270-5000 x 982-236 - - 3622 3876 For further options please see page 39. 38

GARADOR Timber Panel Doors Options Timber door window options Prices in stated per door Standard Georgian Diagonal Single doors Double doors Single doors Double doors Single doors Double doors Plain no on-cost no on-cost 9 26 9 26 Crystal no on-cost no on-cost 9 26 9 26 Only available on Sandhurst. Windows are manufactured from 4 mm acrylic panes. Please state on order if clear or stippled panes required. Options Single doors add Double doors add Factory pre-framed standard single doors 02 - Steel frame for standard double doors - 53 Factory pre-framed purpose-made single doors 2 - Steel frame for purpose-made double doors - 68 Additional Lock Kit, C-type/ R-type (fitted onto door) 45 - Retractable plus gear available on 93, 98 and 236 mm high doors up to 2744 mm wide Factory fully finished stain in Light Oak, Antique Oak, Mahogany, Walnut, Chestnut and Ebony 29-09 63 Factory white primer ready for on-site painting 48 229 Factory fully finished painting (any RAL colour) 249 433 Diecast metal handles with matching base plates: brass effect, chrome effect and white 33 33 Bottom weatherseal, 2405 mm length (suitable for gaps up to 5 mm between the door and the floor level) Bottom weatherseal, 3000 mm length (suitable for gaps up to 5 mm between the door and the floor level) Steel chassis and frame if applicable finished in RAL colour (Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040). Additional lead time may apply. 29 29 33 33 99 56 39

GARADOR Steel and Timber Garage Side Doors Steel and Timber Garage Side Doors Surface Steel doors constructed around a strong steel box section chassis in Traffic White (RAL 906) as standard. Timber doors constructed using solid red cedar, built around a strong steel box section chassis. A range of stain options are available. Stock Availability Four to six week week lead time on standard and purpose made sizes. Handle Supplied with lever/ lever handle on left side (viewed outside) Steel door - standard sizes Size Code Internal (mm x mm) Overall frame size (between fix) (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton 2664 762 x 93 882 x 989 525 3 525 3 525 3 588 3 45 2666 762 x 98 882 x 2039 536 3 536 3 536 3 599 3 427 2670 762 x 236 882 x 294 552 3 552 3 552 3 65 3 443 3064 94 x 93 034 x 989 546 3 546 3 546 3 609 3 437 3066 94 x 98 034 x 2039 557 3 557 3 557 3 620 3 448 3070 94 x 236 034 x 294 575 3 575 3 575 3 638 3 465 3664 067 x 93 87 x 989 568 568 568 632 459 3666 067 x 98 87 x 2039 580 580 580 643 47 3670 067 x 234 87 x 294 596 596 596 659 487 4064 209 x 93 320 x 989 590 590 590 653 48 4066 209 x 98 320 x 2039 60 60 60 664 492 4070 209 x 236 320 x 294 606 606 606 669 508 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. 3 Doors under 000 mm width only have one vertical column of pressings. These doors vary from images shown. Steel door - purpose-made sizes Internal (mm x mm) Overall frame size (between fix) (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton 700-066 x 93-236 820-86 x 989-294 677 4 677 4 677 4 74 4 580 2067-209 x 93-236 87-320 x 989-294 720 720 720 784 622 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. 4 Only available from 755 mm wide. Overall frame size is 875 mm wide for Cathedral, Beaumont and Georgian only. All doors come factory pre-framed, right hand hinged with the handle on the left as standard (viewed from outside). Supplied with lever / lever handle set. Doors only available to open outwards. 40

GARADOR Steel and Timber Garage Side Doors Timber door - standard sizes Size Code Internal (mm x mm) Overall frame size (between fix) (mm x mm) Vertical Cedar Horizontal Cedar Kingsbury Seymour Half Chevron (Left) Half Chevron (Right) 2664 762 x 93 882 x 989 952 974 033 952 40 40 2666 762 x 98 882 x 2039 963 984 043 963 50 50 2670 762 x 236 882 x 294 979 000 059 979 66 66 3064 94 x 93 034 x 989 984 005 064 984 7 7 3066 94 x 98 034 x 2039 995 06 076 995 82 82 3070 94 x 236 034 x 294 0 033 09 0 98 98 3664 067 x 93 87 x 989 06 038 097 06 204 204 3666 067 x 98 87 x 2039 027 048 07 027 24 24 3670 067 x 234 87 x 294 043 064 23 043 230 230 4064 209 x 93 320 x 989 048 069 28 048 235 235 4066 209 x 98 320 x 2039 059 08 40 059 247 247 4070 209 x 236 320 x 294 076 097 55 076 262 262 No fitting clearance allowed. Timber door - purpose-made sizes Internal (mm x mm) Overall frame size (between fix) (mm x mm) Vertical Cedar Horizontal Cedar Kingsbury 2 Seymour Half Chevron (Left) Half Chevron (Right) 700-066 x 93-236 820-86 x 989-294 50 7 230 50 337 337 2067-209 x 93-236 87-320 x 989-294 24 235 294 24 40 40 No fitting clearance allowed. 2 Minimum overall frame width for Kingsbury is 826 mm. 4

GARADOR Steel and Timber Garage Side Doors Options for garage side doors add For powder-coated steel doors : Terra Brown (RAL 8028) 2 For powder-coated steel doors : Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040) 7 Handles for steel doors: knob/lever black plastic 2 For timber doors: factory fully finishing in Light Oak, Antique Oak, Mahogany, Walnut, Chestnut and Ebony 7 Factory white primer ready for on-site painting 20 Factory fully finished painting (any RAL colour) 200 Anodised Aluminium lever/lever handles: white 92 Anodised Aluminium lever/lever handles: chrome effect 7 Left hand hinged 66 For steel doors: poly-wrapping (free of charge on colour doors) 8 Coloured Beaumont with windows door is supplied with white or brown window frames as standard (for colour window frames see page 5). 42

GARADOR For your Notes 43

GARADOR Steel and Timber Side-hinged Doors Steel and Timber Side-hinged Doors Surface Steel Side-hinged doors are constructed around a strong steel box section chassis in Traffic White (RAL 906) as standard. Timber doors constructed using solid red cedar, built around our steel box section chassis. A range of stain options are available. Stock Availability Four to six week lead time on standard and purpose made sizes. Handle Supplied with black lever/ lever handle on right side (viewed outside) Packaging All steel side-hinged doors are poly-wrapped as standard. Steel door - standard sizes Size Code Internal (mm x mm) Overall frame size (between fix) (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows Carlton 2 6060 80 x 830 930 x 890 - - - - 885 6660 964 x 830 2084 x 890 - - - - 902 6664 964 x 93 2084 x 99 - - - - 92 6666 964 x 98 2084 x 204 - - - - 92 6670 964 x 236 2084 x 296 - - - - 94 7060 24 x 830 2234 x 890 - - - - 94 7064 24 x 93 2234 x 99 032 032 032 279 958 7066 24 x 98 2234 x 204 032 032 032 279 958 7070 24 x 236 2234 x 296 05 05 05 297 978 7564 2239 x 93 2359 x 99 089 089 089 337 06 7566 2239 x 98 2359 x 204 089 089 089 337 06 7570 2239 x 236 2359 x 296 09 09 09 357 032 7664 2264 x 93 2384 x 99 09 09 09 357 032 7666 2264 x 98 2384 x 204 09 09 09 357 032 7670 2264 x 236 2384 x 296 26 26 26 373 05 8064 249 x 93 2539 x 99 65 65 65 42 089 8066 249 x 98 2539 x 204 65 65 65 42 089 8070 249 x 236 2539 x 296 83 83 83 43 09 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a /3 2/3 door configuration. Prices are the same but please be aware panel configurations on Georgian, Beaumont & Cathedral doors will have 3 pressing columns with increased spacing between the pressing (/3 2/3 is a term used to describe these doors but please note the /3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). /3 leaf is always leading. 44

GARADOR Steel and Timber Side-hinged Doors Steel door - purpose-made sizes Overall frame size (between fix) (mm x mm) Georgian Beaumont Cathedral Beaumont with Windows 2 Carlton 930-2234 x 890-204 - - - - 026 930-2234 x 2042-296 - - - - 057 2235-2384 x 890-204 - - - - 07 2235-2384 x 99-204 74 74 74 422 09 2235-2384 x 2042-296 87 87 87 435 33 2385-2539 x 890-204 - - - - 23 2385-2539 x 99-204 249 249 249 495 73 2385-2539 x 2042-296 266 266 266 53 89 No fitting clearance allowed. 2 Windows for Beaumont: Standard ( ), Diamond ( ), Cross ( ). Please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a /3 2/3 door configuration. Prices are the same but please be aware panel configurations on Georgian, Beaumont & Cathedral doors will have 3 pressing columns with increased spacing between the pressing (/3 2/3 is a term used to describe these doors but please note the /3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). /3 leaf is always leading. 45

GARADOR Steel and Timber Side-hinged Doors Standard Sizes Timber door - standard sizes Size Code Internal (mm x mm) Overall frame size (between fix) (mm x mm) Vertical Cedar 2 Horizontal Kingsbury Seymour Tudor Cedar 2 6060 80 x 830 930 x 890 476 50 668 390 390 6660 964 x 830 2084 x 890 497 532 668 4 4 6664 964 x 93 2084 x 99 497 532 668 4 4 6666 964 x 98 2084 x 204 53 548 674 428 428 6670 964 x 236 2084 x 296 53 548 695 428 428 7060 24 x 830 2234 x 890 540 574 695 454 454 7064 24 x 93 2234 x 99 546 579 7 460 460 7066 24 x 98 2234 x 204 55 586 732 465 465 7070 24 x 236 2234 x 296 55 586 743 465 465 7564 2239 x 93 2359 x 99 567 60 802 482 482 7566 2239 x 98 2359 x 204 572 607 83 487 487 7570 2239 x 236 2359 x 296 582 67 850 497 497 7664 2264 x 93 2384 x 99 567 60 807 482 482 7666 2264 x 98 2384 x 204 572 607 834 487 487 7670 2264 x 236 2384 x 296 582 67 872 497 497 8064 249 x 93 2539 x 99 636 67 989 55 55 8066 249 x 98 2539 x 204 642 676 2000 556 556 8070 249 x 236 2539 x 296 647 68 2059 56 56 No fitting clearance allowed. 2 The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a /3 2/3 door configuration on Vertical Cedar and Horizontal Cedar doors. Prices are the same but please be aware panel configurations may be different from those shown above (/3 2/3 is a term used to describe these doors but please note the /3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). /3 leaf is always leading. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 46

GARADOR Steel and Timber Side-hinged Doors Standard Sizes Timber door - standard sizes Size Code Internal (mm x mm) Overall frame size (between fix) (mm x mm) Chevron Cedar Ashton 3 Ashton Chevron 3 6060 80 x 830 930 x 890 668 807 898 6660 964 x 830 2084 x 890 668 807 898 6664 964 x 93 2084 x 99 668 807 898 6666 964 x 98 2084 x 204 674 83 903 6670 964 x 236 2084 x 296 695 834 925 7060 24 x 830 2234 x 890 695 834 925 7064 24 x 93 2234 x 99 7 850 94 7066 24 x 98 2234 x 204 732 872 962 7070 24 x 236 2234 x 296 743 882 973 7564 2239 x 93 2359 x 99 802 94 203 7566 2239 x 98 2359 x 204 83 952 2043 7570 2239 x 236 2359 x 296 850 989 2080 7664 2264 x 93 2384 x 99 807 946 2038 7666 2264 x 98 2384 x 204 834 973 2064 7670 2264 x 236 2384 x 296 872 200 202 8064 249 x 93 2539 x 99 989 228 229 8066 249 x 98 2539 x 204 2000 238 2230 8070 249 x 236 2539 x 296 2059 297 2288 No fitting clearance allowed. 3 On doors with windows, please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 47

GARADOR Steel and Timber Side-hinged Doors Purpose-made Sizes Timber door - purpose-made sizes Overall frame size (between fix) (mm x mm) Vertical Cedar 2 Horizontal Kingsbury Seymour Tudor Cedar 2 930-2234 x 890-204 58 67 764 502 502 930-2234 x 2042-296 67 654 80 539 539 2235-2384 x 890-204 654 69 838 575 575 2235-2384 x 2042-296 70 738 980 623 623 2385-2539 x 890-204 80 838 2085 722 722 2385-2539 x 2042-296 833 869 27 754 754 No fitting clearance allowed. 2 On doors with windows, please state on order if plain or crystal panes. Timber door - purpose-made sizes Overall frame size (between fix) (mm x mm) Chevron Cedar Ashton 3 Ashton Chevron 3 930-2234 x 890-204 764 90 990 930-2234 x 2042-296 80 938 2027 2235-2384 x 890-204 838 974 2064 2235-2384 x 2042-296 980 224 227 2385-2539 x 890-204 2085 2228 2322 2385-2539 x 2042-296 27 226 2355 No fitting clearance allowed. 2 The above doors are shown as 50/50 door leaves configuration. Up to 2234 mm overall frame width these doors are also available as a /3 2/3 door configuration on Vertical Cedar and Horizontal Cedar doors. Prices are the same but please be aware panel configurations may be different from those shown above (/3 2/3 is a term used to describe these doors but please note the /3 door leaf is always 800 mm wide with the 2/3 element varying to make the desired overall width). /3 leaf is always leading. 3 On doors with windows, please state on order if plain or crystal panes. All doors come factory pre-framed, right hand door leaf leading as standard (viewed from the outside) with lever / lever handle set. Door stays are recommended in windy locations. 48

GARADOR Steel and Timber Side-hinged Doors Options Options for side-hinged doors add For powder-coated steel doors : Terra Brown (RAL 8028) 28 For powder-coated steel doors : Moss Green (RAL 6005), Ruby Red (RAL 3003), Signal Blue (RAL 5005), Jet Black (RAL 9005), Steel Blue (RAL 50), Light Ivory (RAL 05), Pigeon Blue (RAL 504), Fir Green (RAL 6009), Anthracite Grey (RAL 706), Stone Grey (RAL 7030), Light Grey (RAL 7035), Ochre Brown (RAL 800), Clay Brown (RAL 8003), White Aluminium (RAL 9006), Grey Aluminium (RAL 9007) and Window Grey (RAL 7040) 99 Door stays (pair) 56 Handles for steel doors: knob/lever black plastic 2 Handles for timber doors: knob/lever black plastic 2 For timber doors: factory fully finished in Light Oak, Antique Oak, Mahogany, Walnut, Chestnut and Ebony 09 Factory white primer ready for on-site painting 48 Factory fully finished painting (any RAL colour) 250 Anodised Aluminium lever/lever handles: white 92 Anodised Aluminium lever/lever handles: chrome effect 7 Left hand hinged 66 Coloured Beaumont with windows doors are supplied with white or brown window frames as standard (for colour window frames see page 5). For timber side-hinged doors chassis is either white or brown regardless of exact colour of timber finishing, except when Ebony finishing is ordered and then the chassis will be supplied in black. 49

GARADOR Steel Panel Doors - Specifications Steel Panel Doors - Specifications Canopy Gear Specifications The canopy gear allows the door to travel in vertical tracks and is counterbalanced by an overhead torsion spring. The nominal drive through is 40 mm less than the opening width and 30 mm less than the opening height. In the open position, the door projects approximately one third of the door height, forming a canopy. A (Projection) 240 mm 60 mm kick-up Height A 6'4" 633 6'6" 683 7'0" 838 For doors fitted with an operator, please respect operator specifications. On-site timber frame Behind brickwork fixing Between brickwork fixing Plan view Plan view Opening width 55 min. 55 min. Opening width 55 min. 55 min. Side view min. distance of headroom 240 mm min. distance of headroom 240 mm 55 mm min. 55 mm min. Side view Factory pre-framed with steel box frame The garage door is supplied factory fitted to a steel box section frame and is secured to the brickwork by using just 7 fixings. Behind brickwork fixing Between brickwork fixing 5 mm min. Plan view 5 mm min. Plan view 65* 60 Overall frame width 60 65* 60 60 Overall frame width Side view min. distance of headroom 240 mm min. distance of headroom 240 mm 60 mm Internal frame height * width of anchor in this position 60 mm 0 mm required for kick-up Internal frame height Side view 50

GARADOR Steel Panel Doors - Specifications Single & Double Retractable Gear Specifications The retractable gear allows the door to be retracted inside the garage when open by means of horizontal overhead tracks supported by wall or ceiling mounted suspension brackets. This gear is available as an option for single doors and comes as standard with double garage doors. The nominal drive through clearance is 05 mm less than the opening width and 0 mm less than the opening height for single doors and 40 mm less than the opening height for double doors. A (Projection) Opening height 50 mm Height A 6'4" 90 6'6" 935 7'0" 00 7'6" 085 8'0" 62.5 40 mm kick-up For doors fitted with an operator, please respect operator specifications. On-site timber frame Behind brickwork fixing Between brickwork fixing Plan view Plan view Opening width Opening width 70 min. 70 min. 70 min. 70 min. Side view Opening height 50 mm Side view Opening height 50 mm min. headroom required 70 mm 70 min. Factory pre-framed with steel box frame The garage door is supplied factory fitted to a steel box section frame and is secured to the brickwork by using just 7 fixings. Behind brickwork fixing Between brickwork fixing Plan view 5 mm min. 5 mm min. Plan view 65* 75 Overall frame width 75 65* 75 75 Overall frame width Side view Opening height 50 mm Opening height 50 mm 60 mm * width of anchor in this position Internal frame height 60 mm Internal frame height Side view Retractable Plus Gear Door height Clear height below lifting arms For any door up to a width of 2744 mm in any of the three 7 0 260 standard heights Retractable Plus Gear is available. 6 6 05 This gear type creates clear drive through width at the crucial wing mirror height. 6 4 055 5

GARADOR Steel Panel Doors - Specifications Garage Side Door & Side-hinged Door Specifications Door leaves supplied factory pre-framed ready for site installation. Fixed leaf (RH side when viewed from inside) fitted with tower bolts at top and bottom of inner leading edge. The floor will need to be finished and level for the bottom tower bolts to engage. Side-hinged door factory pre-framed Behind brickwork fixing Between brickwork fixing 0 min. 60 60 0 min. 0 min. H H 60 Overall frame width 60 60 Overall frame width 60 Plan view Side view Plan view Side view The nominal drive through clearance is 24 mm less than the opening width and 2 mm less than the opening height. Garage Side door factory pre-framed Behind brickwork fixing Between brickwork fixing 0 min. 60 60 0 min. 0 min. H H 60 60 60 60 Overall frame width Overall frame width Plan view Side view Plan view Side view The nominal clear passage clearance is 74 mm less than the opening width and 2 mm less than the opening height. 52

GARADOR Steel Panel Doors - Specifications Frame Dimensions for Panel Doors Internal frame size Pre-framed canopy door Pre-framed retractable door Frame kit for double door On-site timber frame overall frame sizes shown overall frame sizes shown overall frame sizes shown Size Code (mm x mm) (mm x mm) (mm x mm) (mm x mm) 6660 984 x 830 2094 x 888 224 x 888 6663 984 x 906 2094 x 964 224 x 964 6664 984 x 93 2094 x 989 224 x 989 6666 984 x 98 2094 x 2039 224 x 2039 6670 984 x 236 2094 x 294 224 x 294 6064 2084 x 93 294 x 989 2224 x 989 6066 2084 x 98 294 x 2039 2224 x 2039 6070 2084 x 236 294 x 294 2224 x 294 7060 234 x 830 2244 x 888 2274 x 888 7063 234 x 905 2244 x 963 2274 x 963 7064 234 x 93 2244 x 989 2274 x 989 7066 234 x 98 2244 x 2039 2274 x 2039 7070 234 x 236 2244 x 294 2274 x 294 7076 234 x 2286 2274 x 2344 764 270 x 93 2280 x 989 230 x 989 766 270 x 98 2280 x 2039 230 x 2039 770 270 x 236 2280 x 294 230 x 294 776 270 x 2286 230 x 2344 7364 2224 x 93 2334 x 989 2364 x 989 7366 2224 x 98 2334 x 2039 2364 x 2039 7370 2224 x 236 2334 x 294 2364 x 294 7564 2259 x 93 2369 x 989 2399 x 989 7566 2259 x 98 2369 x 2039 2399 x 2039 7570 2259 x 236 2369 x 294 2399 x 294 7576 2259 x 2286 2399 x 2344 7664 2284 x 93 2394 x 989 2424 x 989 7666 2284 x 98 2394 x 2039 2424 x 2039 7670 2284 x 236 2394 x 294 2424 x 294 7676 2284 x 2286 2424 x 2344 8064 2439 x 93 2549 x 989 2579 x 989 8066 2439 x 98 2549 x 2039 2579 x 2039 8070 2439 x 236 2549 x 294 2579 x 294 8076 2439 x 2286 2579 x 2344 8666 2590 x 98 2730 x 2039 8670 2590 x 236 2730 x 294 8676 2590 x 2286 2730 x 2344 9066 2744 x 98 2884 x 2039 9070 2744 x 236 2884 x 294 9076 2744 x 2286 2884 x 2344 066 3049 x 98 389 x 2039 070 3049 x 236 389 x 294 076 3049 x 2286 389 x 2344 66 3354 x 98 3494 x 2039 70 3354 x 236 3494 x 294 76 3354 x 2286 3494 x 2344 266 3659 x 98 3799 x 2039 270 3659 x 236 3799 x 294 276 3659 x 2286 3799 x 2344 366 3964 x 98 404 x 2039 370 3964 x 236 404 x 294 376 3964 x 2286 404 x 2344 466 4269 x 98 4409 x 2039 470 4269 x 236 4409 x 294 566 4574 x 98 474 x 2039 570 4574 x 236 474 x 294 666 4879 x 98 509 x 2039 670 4879 x 236 509 x 294 No fitting clearance allowed. If door is fitted between the brickwork a minimum of 0 mm clearance over the width and 5 mm over the height should be added to the overall frame size when selecting the door. 53

GARADOR Steel Sectional Garage Doors Steel Sectional Garage Doors Door sections Made of galvanized steel. Available as Premium (42 mm thick insulated panel) and Classic (single skinned panel) versions. Premium doors are PU-foam insulated (00% CFC-free). Bottom door section comes with floor seal. Surface Outside: Woodgrain embossed, Sandgrain or Silkgrain textures with painted or foil coated finishes. Inside: pebble texture. Spring arrangement All doors up to 3049 mm wide come with tension springs as standard and torsion springs are available at extra cost. All doors over 3050 mm wide come with torsion springs as standard. Low headroom application available at extra cost. Side frames & Fascia Sectional doors are designed to be fitted behind the reveals and side frames are supplied white in colour. Cover profiles are available for use with coloured or foil coated door finishes. A single skin fascia is supplied with all doors which is finished in the same colour as the door sections. Colours Steel Woodgrain and Silkgrain doors can be ordered in almost any colour from the RAL colour chart. Standard colours are: - Light Ivory (RAL 05) - Moss Green (RAL 6005) - Light Grey (RAL 7035) - Terra Brown (RAL 8028) - Ruby Red (RAL 3003) - Fir Green (RAL 6009) - Window Grey (RAL 7040) - Jet Black (RAL 9005) - Steel Blue (RAL 50) - Anthracite Grey (RAL 706) - Ochre Brown (RAL 800) - White Aluminium (RAL 9006) - Pigeon Blue (RAL 504) - Stone Grey (RAL 7030) - Clay Brown (RAL 8003) - Grey Aluminium (RAL 9007) Special RAL colours are: - Black Red (RAL 3007) - Black Grey (RAL 702) - Signal Black (RAL 9004) - Traffic Black (RAL 907) - Black Blue (RAL 5004) - Black Brown (RAL 8022) - Graphite Black (RAL 90) Non standard RAL colours are: Based on full RAL colour chart excluding Traffic Purple (RAL 4006), Purple Violet (RAL 4007), Sapphire Blue (RAL 5003) and pearlescent or florescent options. Timber effect foil coated doors are available in the following five finishes: Golden Oak, Dark Oak, Night Oak, Rosewood and Winchester Oak. Foil coated finish also available in Titan Metallic (CH703) Handle Sectional doors are supplied ex-works for automatic operation, i.e. without handle hole and lock. Factory-fitted handle and lock are available with an increased lead-time. For electrical operation of a garage with no other personal access, an emergency release kit must be fitted. Packaging Sectional doors are provided in a palleted format shrink wrapped for easy handling. Stock availability Popular sectional doors are generally ex-stock in White (RAL 906) and Terra Brown (RAL 8028), other sizes and colour options require up to 6 weeks lead-time. Contact sales office for further details. Gears Tension spring Torsion spring Low headroom torsion spring fitting 54

GARADOR Steel Sectional Garage Doors Standard Sizes Georgian design Woodgrain Timber effect Size Code Brickwork opening (mm x mm) Premium Classic Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL 6062 2080 x 875 944 76 234 45 99 398 6066 2080 x 2000 987-258 54 22 424 6060 2080 x 2080 999 740-6 22 44 7066 234 x 2000 022 728 258 58 28 435 7070 234 x 225 035 740 272 68 23 463 7666 2286 x 2000 022 728 258 70 233 466 7670 2286 x 225 035 740 272 80 248 495 7674 2286 x 2250 034 772 389 9 262 525 7679 2286 x 2375 03 889 420 20 277 554 7682 2286 x 2500 00 887 47 22 29 583 8066 2438 x 2000 078 754 335 8 249 497 8070 2438 x 225 094 767 353 92 264 528 8074 2438 x 2250 090 802 528 203 280 560 8079 2438 x 2375 59 95 548 25 295 59 8082 2438 x 2500 57 94 577 226 3 622 8666 259 x 2000 078 754 335 92 264 529 8670 259 x 225 094 767 353 204 28 562 9066 2743 x 2000 7 874 464 203 279 559 9070 2743 x 225 89 890 489 26 297 594 9666 2895 x 2000 229 98 545 25 295 59 9670 2895 x 225 254 933 572 228 34 628 066 3048 x 2000 8 98 545 226 3 622 070 3048 x 225 204 933 572 240 330 66 66 3353 x 2000 407-837 249 342 684 70 3353 x 225 433-867 264 363 727 266 3657 x 2000 659-2077 27 373 746 270 3657 x 225 687-2 288 396 793 366 3962 x 2000 725-244 294 404 808 370 3962 x 225 749-275 32 429 859 466 4267 x 2000 793-220 36 435 870 470 4267 x 225 822-2245 336 462 925 4666 4420 x 2000 859-2269 328 45 902 4670 4420 x 225 889-2306 348 479 958 566 4572 x 2000 892-2297 339 466 933 570 4572 x 225 924-2330 360 495 99 5666 4725 x 2000 985-2340 350 482 964 5670 4725 x 225 206-2376 372 52 024 666 4877 x 2000 985-2385 36 497 995 670 4877 x 225 206-2422 384 529 057 As standard with tension spring fitting, torsion spring fitting available for Premium doors at 48 surcharge. As standard with torsion spring fitting. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 59. 55

GARADOR Steel Sectional Garage Doors Standard Sizes Linear small design Woodgrain Size Code Brickwork opening (mm x mm) Premium Classic Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL 6062 2080 x 875 752 638 45 99 398 6066 2080 x 2000 784-54 22 424 6060 2080 x 2080 84 667 6 22 44 7066 234 x 2000 8 650 58 28 435 7070 234 x 225 840 667 68 23 463 7666 2286 x 2000 8 650 70 233 466 7670 2286 x 225 840 667 80 248 495 7674 2286 x 2250 852 704 9 262 525 7679 2286 x 2375 97 82 20 277 554 7682 2286 x 2500 95 8 22 29 583 8066 2438 x 2000 853 676 8 249 497 8070 2438 x 225 885 70 92 264 528 8074 2438 x 2250 892 737 203 280 560 8079 2438 x 2375 960 845 25 295 59 8082 2438 x 2500 957 844 226 3 622 8666 259 x 2000 853 676 92 264 529 8670 259 x 225 885 70 204 28 562 9066 2743 x 2000 923 762 203 279 559 9070 2743 x 225 954 785 26 297 594 9666 2895 x 2000 965 787 25 295 59 9670 2895 x 225 00 87 228 34 628 066 3048 x 2000 93 787 226 3 622 070 3048 x 225 964 87 240 330 66 66 3353 x 2000 097 099 249 342 684 70 3353 x 225 40 39 264 363 727 266 3657 x 2000 287 25 27 373 746 270 3657 x 225 335 266 288 396 793 366 3962 x 2000 334 242 294 404 808 370 3962 x 225 384 29 32 429 859 466 4267 x 2000 383 346 36 435 870 470 4267 x 225 437 47 336 462 925 4666 4420 x 2000 428 376 328 45 902 4670 4420 x 225 486 449 348 479 958 566 4572 x 2000 454 383 339 466 933 570 4572 x 225 5 455 360 495 99 5666 4725 x 2000 58 425 350 482 964 5670 4725 x 225 576 497 372 52 024 666 4877 x 2000 58 423 36 497 995 670 4877 x 225 576 497 384 529 057 As standard with tension spring fitting, torsion spring fitting available for Premium doors at 48 surcharge. As standard with torsion spring fitting. Only Linear Standard XS windows available. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 59. 56

GARADOR Steel Sectional Garage Doors Standard Sizes Linear medium design Woodgrain Sandgrain Silkgrain Timber Effect / Titan (CH703) Size Code Brickwork opening (mm x mm) Premium Classic 2 Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Anthr. Grey, Traffic White Terra Brown, White Alum. 6062 2080 x 875 752 638 820 99 99 009 45 99 398 6066 2080 x 2000 784-858 96 96 055 54 22 424 6060 2080 x 2080 84 667 89 998 997 096 6 22 44 7066 234 x 2000 8 650 858 96 96 055 58 28 435 7070 234 x 225 840 667 89 998 997 096 68 23 463 7666 2286 x 2000 8 650 858 96 96 055 70 233 466 7670 2286 x 225 840 667 89 998 997 096 80 248 495 7674 2286 x 2250 852 704 934 047 046 50 9 262 525 7679 2286 x 2375 97 82 973 090 09 99 20 277 554 7682 2286 x 2500 95 8 0 33 33 247 22 29 583 8066 2438 x 2000 853 676 905 04 06 9 8 249 497 8070 2438 x 225 885 70 944 058 060 67 92 264 528 8074 2438 x 2250 892 737 975 092 093 203 203 280 560 8079 2438 x 2375 960 845 08 4 43 258 25 295 59 8082 2438 x 2500 957 844 062 90 94 36 226 3 622 8666 259 x 2000 853 676 905 04 06 9 92 264 529 8670 259 x 225 885 70 944 058 060 67 204 28 562 9066 2743 x 2000 923 762 988 07 3 228 203 279 559 9070 2743 x 225 954 785 027 5 57 277 26 297 594 9666 2895 x 2000 965 787 039 64 72 295 25 295 59 9670 2895 x 225 00 87 080 20 28 347 228 34 628 066 3048 x 2000 93 787 039 64 72 295 226 3 622 070 3048 x 225 964 87 080 20 28 347 240 330 66 66 3353 x 2000 097-233 38 398 552 249 342 684 70 3353 x 225 40-280 434 453 62 264 363 727 266 3657 x 2000 287-386 553 577 754 27 373 746 270 3657 x 225 335-440 63 639 823 288 396 793 366 3962 x 2000 334-426 598 624 807 294 404 808 370 3962 x 225 384-479 657 685 876 32 429 859 466 4267 x 2000 383-467 644 672 862 36 435 870 470 4267 x 225 437-526 70 739 937 336 462 925 4666 4420 x 2000 428-503 684 75 90 328 45 902 4670 4420 x 225 486-565 753 785 988 348 479 958 566 4572 x 2000 454-56 698 729 927 339 466 933 570 4572 x 225 5-578 768 80 2007 360 495 99 5666 4725 x 2000 58-542 728 76 963 350 482 964 5670 4725 x 225 576-604 797 83 204 372 52 024 666 4877 x 2000 58-570 759 792 998 36 497 995 670 4877 x 225 576-63 827 863 2077 384 529 057 Sandgrain surface available in Traffic White (RAL 906), Terra Brown (RAL 8028), Anthracite Grey (RAL 706) and White Aluminium (RAL 9006). 2 Only Linear Standard XS windows available. As standard with tension spring fitting, torsion spring fitting available for Premium doors at 48 surcharge. As standard with torsion spring fitting. Purpose-made sizes available upon request. Non standard colours also available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 59. 57

GARADOR Steel Sectional Garage Doors Standard Sizes Linear large design Sandgrain Silkgrain Timber Effect / Titan (CH703) Size Code Brickwork opening (mm x mm) Premium Premium Premium Surcharge for Standard Colours Surcharge for Non-Std. Colours Surcharge for Special RAL Traffic White Anthr. Grey, Terra Brown, White Alum. 6062 2080 x 875 973 090 049 5 45 99 398 6066 2080 x 2000 998 8 076 79 54 22 424 6060 2080 x 2080 00 32 089 93 6 22 44 7066 234 x 2000 998 8 076 79 58 28 435 7070 234 x 225 00 32 089 93 68 23 463 7666 2286 x 2000 998 8 076 79 70 233 466 7670 2286 x 225 00 32 089 93 80 248 495 7674 2286 x 2250 056 83 38 246 9 262 525 7679 2286 x 2375 060 88 42 250 20 277 554 7682 2286 x 2500 088 29 7 282 22 29 583 8066 2438 x 2000 053 80 36 247 8 249 497 8070 2438 x 225 072 20 58 270 92 264 528 8074 2438 x 2250 27 263 26 335 203 280 560 8079 2438 x 2375 55 294 246 367 25 295 59 8082 2438 x 2500 88 33 28 406 226 3 622 8666 259 x 2000 053 80 36 247 92 264 529 8670 259 x 225 072 20 58 270 204 28 562 9066 2743 x 2000 56 295 249 374 203 279 559 9070 2743 x 225 7 32 265 39 26 297 594 9666 2895 x 2000 26 362 36 450 25 295 59 9670 2895 x 225 235 384 336 47 228 34 628 066 3048 x 2000 26 362 36 450 226 3 622 070 3048 x 225 235 384 336 47 240 330 66 66 3353 x 2000 44 64 564 729 249 342 684 70 3353 x 225 463 639 588 754 264 363 727 266 3657 x 2000 624 89 766 956 27 373 746 270 3657 x 225 653 852 798 99 288 396 793 366 3962 x 2000 675 876 823 2020 294 404 808 370 3962 x 225 699 903 848 2047 32 429 859 466 4267 x 2000 725 932 878 208 36 435 870 470 4267 x 225 753 964 908 25 336 462 925 4666 4420 x 2000 773 986 930 240 328 45 902 4670 4420 x 225 800 206 960 273 348 479 958 566 4572 x 2000 79 2006 95 263 339 466 933 570 4572 x 225 89 2038 982 298 360 495 99 5666 4725 x 2000 824 2043 987 2204 350 482 964 5670 4725 x 225 855 2078 2020 224 372 52 024 666 4877 x 2000 855 2078 2022 2243 36 497 995 670 4877 x 225 888 25 2058 2283 384 529 057 As standard with tension spring fitting, torsion spring fitting available for Premium doors at 48 surcharge. As standard with torsion spring fitting. Sandgrain surface available in Traffic White (RAL 906), Terra Brown (RAL 8028), Anthracite Grey (RAL 706) and White Aluminium (RAL 9006). Purpose-made sizes available upon request. Doors supplied without locking as standard (see options on page 60 for handles). For window options please see page 59. 58

GARADOR Steel Sectional Garage Doors Options Window options Prices stated per window Georgian Standard Georgian Cross Georgian Diamond Georgian Sunrise Linear Standard XS Linear Standard X Linear Cross X Linear Standard 2 XL Standard colour - Add Non standard colour - Add Special RAL colour - Add Woodgrain Georgian Premium 87 0 92 0 - - - - 24 42 84 Classic 75 84 84 84 - - - - 24 42 84 Woodgrain, Sandgrain and Silkgrain Linear Premium - - - - 0 87 0 0 22 40 80 Classic - - - - 80 75 84 84 22 40 80 Timber effect 3 Premium 08 22 22 22 23 08 22 22 - - - Linear Standard X and Cross X windows only available on Linear Medium and Linear Large Designs. 2 Linear Standard XL windows only available on Linear Large Designs 3 Window frames are painted in a colour to best match the colour of the foil coat. Georgian windows Doors up to 2070 mm wide have 3 windows, 2075 mm to 2740 mm wide have 4 windows, 2895 mm to 3353 mm wide have 5 windows, 3657 mm to 3962 mm wide have 6 windows, 4267 mm to 4725 mm have 7 windows and doors over 4877 mm wide have 8 windows (except Classic panels of 2080 mm wide which have 4 and then 2743 mm wide which have 5). Linear Standard XS Doors up to 2438 mm wide have 2 windows, 259 mm to 3353 mm wide have 3 windows, 3657 mm to 4420 mm wide have 4 windows and doors over 4572 mm wide have 5 windows. Linear Standard X & Cross X Doors up to 2080 mm wide have 3 windows, 234 mm to 2743 mm wide have 4 windows, 2895 mm to 3353 mm wide have 5 windows, 3657 mm to 3962 mm wide have 6 windows, 4267 mm to 4725 mm wide have 7 windows and doors of 4877 mm wide have 8 windows. Linear Standard XL Doors up to 234 mm wide have 2 windows, 2286 mm to 2895 mm wide have 3 windows, 3048 mm to 3962 mm wide have 4 windows, 4267 mm to 4420 mm wide have 5 windows and doors over 4725 mm have 6 windows. Please state on order if clear or crystal panes. 59

GARADOR Steel Sectional Garage Doors Options Options for sectional doors add Special anchor set (required if you fix the door between brickwork and fasten the frame on the side). If using special anchor set 90 mm cover profiles will be required to cover fixing holes. 4 Please note: Frame legs for brown and any coloured doors come in white as standard, matching cover profiles are available. Silkgrain, Foil Coated Timber Effect and Titan Metallic (CH703) are available exstock. Please however note Colours and RAL to choose must be ordered with the door and cannot be ordered as a spare part at a later time. Cover Profiles Woodgrain White Colour RAL to choose Foil Coated Timber Effect / Sandgrain/ Silkgrain Woodgrain Sandgrain/ Silkgrain Woodgrain Silkgrain Titan (CH703) Door height 55 90 55 90 55 90 55 90 55 90 55 90 55 90 875-2000 44 59 48 65 57 84 6 88 78 9 84 28 69 96 200-225 47 62 5 69 60 89 65 93 82 27 89 35 73 02 226-2250 50 66 54 73 64 94 68 99 87 34 94 43 78 08 225-2375 52 69 57 77 67 99 72 04 92 4 99 5 82 4 2376-2500 55 73 60 8 70 04 76 09 96 48 04 58 86 9 ThermoFrame set ThermoFrame set ThermoFrame set 2 ThermoFrame set 3 Door height up to 3000 mm (length 320 mm) Door width up to 3250 mm (length 3250 mm) per set 200 Door height up to 3000 mm (length 320 mm) Door width from 3250 mm up to 6000 mm (length 6000 mm) per set 238 For doors with track application H (length 6000 mm) (length 5500 mm) per set 238 Set consists of Lintel seal (x) with 2 lip seals Plastic angle profiles (2x) black, 84 x 22.5 mm with lip seal (frame covering may be required to match the colours) 66 Purpose-made width cut-down service (check for size limitations). Cut-down service not available on Classic Doors. 98 Classic black handle set and lock for on-site installation 48 White finish cast aluminium handle set and lock for on-site installation 20 Silver finish cast aluminium handle set and lock for on-site installation 20 Chrome effect stainless steel handle set and lock for on-site installation 40 Brushed chrome effect stainless steel handle set and lock for on site installation 62 Factory-fitted handle and lock available with a 2 week increase in lead-time (complete with classic black handle as standard) 73 Standard headroom torsion spring for sectional door less than 3050 mm wide 50 Low headroom tracks arrangement for torsion spring door over 3050 mm wide (when purchased with door) 98 60

GARADOR Steel Sectional Garage Doors Specifications Sectional doors up to 3050 mm wide and/or 2625 mm high: These doors come with tension spring fitting. With doors from the Premium range the tension springs can be replaced by torsion springs as an option. Tension springs are suitable for low headroom installations. For a low headroom installation with torsion springs please order low headroom track set separately (changing to a low headroom option is not available as a retrofit). Sectional garage door with tension spring fitting Minimum garage dimensions for manually operated doors Headroom: Sideroom: 00 mm 90 mm (each side) min. depth into garage = opening height + 50 opening height + 470 000 Depth into garage: garage door height + 50 mm Clear passage height for manually operated doors: garage door height 80 mm Minimum garage dimensions for doors with GaraMatic operator Headroom Sideroom: Depth into garage: Clear passage height for doors with GaraMatic operator: 5 mm 90 mm (each side) for doors up to 225 mm high: 3200 mm for doors up to 2500 mm high: 3450 mm for doors up to 3000 mm high: 425 mm garage door height 30 mm min. ceiling height = opening height + 00 opening height clear drive through height 490 55 opening height 400 Side view INSIDE FFL opening height 65 clear drive through width 55 25 min. 90 INSIDE min. garage inside dimension Plan view min. 90 6

GARADOR Steel Sectional Garage Doors Specifications Sectional doors wider than 3050 mm wide and/or 2625 mm high: These doors come with torsion springs as standard. For a low headroom installation with torsion springs please order low headroom track pack (changing to a low headroom option is not available as a retrofit). Sectional garage door with torsion spring fitting Minimum garage dimensions for manually operated doors min. depth into garage = opening height + 50 opening height + 470 Headroom: 20 mm 000 Sideroom: 90 mm (each side) Depth into garage: garage door height + 50 mm Clear passage height for manually operated doors: garage door height 50 mm Minimum garage dimensions for doors with GaraMatic operator Headroom: Sideroom: Depth into garage: 20 mm 90 mm (each side) for doors up to 225 mm high: 3200 mm for doors up to 2500 mm high: 3450 mm for doors up to 3000 mm high: 425 mm min. ceiling height = opening height + 20 opening height + 55 opening height clear drive through height 490 55 opening height 285 INSIDE FFL opening height + 45 Clear passage height for doors with GaraMatic operator: full garage door height Side view clear drive through width 55 25 min. 90 INSIDE min. garage inside dimension Plan view min. 90 62

GARADOR Steel Sectional Garage Doors Specifications Sectional doors wider than 3050 mm wide and/or 2625 mm high: These doors come with torsion springs as standard. For a low headroom installation with torsion springs please order low headroom track pack (changing to a low headroom option is not available as a retrofit). Sectional garage door with low headroom torsion spring fitting Minimum garage dimensions for manually operated doors min. depth into garage = opening height + 750 Headroom: Sideroom: 00 mm 90 mm (each side) 000 opening height + 670 opening height + 550 Depth into garage: garage door height + 50 mm Clear passage height for manually operated doors: garage door height 00 mm Minimum garage dimensions for doors with GaraMatic operator Headroom: Sideroom: Depth into garage: 5 mm 90 mm (each side) for doors up to 225 mm high: 3200 mm for doors up to 3000 mm high: 425 mm min. ceiling height = opening height + 00 opening height clear drive through height 490 55 opening height 400 FFL INSIDE opening height 65 Clear passage height for doors with GaraMatic operator: for doors up to 3000 mm wide: garage door height 30 mm for doors wider than 3000 mm: garage door height 80 mm Side view clear drive through width 55 25 min. 90 INSIDE min. garage inside dimension Plan view min. 90 63

GARADOR Automation and Accessories Automation and Accessories Operators GaraMatic operators are an ideal match for all current Garador up & over and sectional doors. As a tried and tested unit hardware on both the door and the operator are perfectly matched and prepared for easy installation. Safety in compliance with the latest European standards Security integral anti-burglar device Convenience super-smooth and maintenance-free All operators come as a complete set as standard, including operator head, operator rail and two hand transmitters (one 4-channel hand transmitter and one 2-channel micro hand transmitter). All operators perfectly match all current Garador up-and-over and sectional garage doors. BS 324 Compliant The combination of Garador garage doors with GaraMatic operators complies with the latest European safety standards. Operators GaraMatic 9 GaraMatic 0 GaraMatic 20 Peak forces 750 N Peak forces 800 N Peak forces 000 N Simple to operate Soft start and soft stop Automatic safety reversal Integral light Streamlined plastic cover Partial open function 50% faster than other operators Half-open function for ventilation Adjustable soft start and soft stop Automatic safety reversal Adjustable integral halogen light Self-closing timer option (light beam device required) 50% faster than other operators Half-open function for ventilation Adjustable soft start and soft stop Automatic safety reversal Adjustable integral halogen light Self-closing timer option (light beam device required) Complete with Light Beam Device as standard Canopy Doors 47 546 67 Standard short boom 2 Retractable and Sectional Doors up to 225 mm high 374 449 520 Medium boom 2 39 467 537 Long boom 2 48 556 627 Canopy door price includes bow arm system. GaraMatic 9 supplied with two 2-channel hand transmitters. 2 For exact boom requirements see grid on page 69. Supplied with two hand transmitters as standard. 64

GARADOR Automation and Accessories Accessories Article Hand transmitter 5-channel (Bi-directional) in matt black Hand transmitter 2-channel (Bi-directional) in matt black Hand transmitter 5-channel (Bi-directional) in white Hand transmitter 2-channel (Bi-directional) in white Reference No. 747 7470 673 67 Price 68 54 74 59 Accessories Article Hand transmitter -channel (Bi-directional) in black Hand transmitter 4-channel (Bi-directional) in black Hand transmitter station in black Hand transmitter station in white Reference No. 670 6779 679 6720 Price 54 56 Accessories Article Hand transmitter sun visor/ wall holder -channel (Bi-directional) transmitter for car cigarette lighter 2-channel (Bi-directional) transmitter for car cigarette lighter 4-channel (Bi-directional) key ring transmitter Reference No. 6784 6782 6783 6795 Price 9 5 5 62 65

GARADOR Automation and Accessories Accessories Article Hand transmitter 2-channel (Bi-directional) Burl wood Hand transmitter 2-channel (Bi-directional) Aluminium Hand transmitter 2-channel (Bi-directional) Carbon Reference No. 6968 6967 6966 Price 73 73 73 Accessories Article Hand transmitter 2-channel (Bi-directional) Green Hand transmitter 2-channel (Bi-directional) Red Aluminium designer 2-channel transmitter 868 mhz Chrome designer 2-channel transmitter 868 mhz Reference No. 6965 6964 4879 4880 Price 73 73 76 76 Accessories Article IT3B Wired wall console FIT2 Bi-directional wireless wall console ITB Wired illuminated push button FCT3 Bi-directional wireless code switch Reference No. 2873 678 2875 677 Price 36 56 26 9 66

GARADOR Automation and Accessories Accessories Article FCT0 Bi-directional wireless code switch (slide lid) FFL2 Bi-directional wireless finger scan (scan lid) IT Wired push button Reference No. 676 6796 695 Price 49 93 6 Accessories Article ESA40 Face fixed key switch ESU40 Recessed key switch EL0 Internal light beam device Reference No. 2876 2877 6786 Price 47 69 62 Accessories Article EL30N External light beam device HE3 (Bi-directional) External receiver Reference No. 2884 6785 Price 07 0 67

GARADOR Automation and Accessories Options Additional options De-latching kit Reference No. 437.95 for up & over doors (required to maintain mechanical locking system retractable doors only) Emergency release Reference No. 437.205 for retractable up & over doors only (required if door is electrically operated and has no other personal access) Emergency release Reference No. 437.90 for sectional door without handle and lock, or canopy up & over doors (required if door is electrically operated and has no other personal access) Emergency release Reference No. 437.83 for sectional door with handle and lock (required if door is electrically operated and has no other personal access) Lintel extension bracket Reference No. 438.63 for canopy doors (required if door is fitted between brickwork under the lintel) 42 34 42 42 37 68

GARADOR Automation and Accessories Specifications Operator Specifications Boom for canopy door including canopy bow arm 05 min. 3200 short boom max. 300 mm 95 On horizontal doors the bow arm is to be fitted off centre. Lintel extension bracket required for canopy doors fitted between the brickwork and under the lintel head. Boom for retractable door 05 min. 3200 short boom 70 Boom for sectional door 20 (torsion spring) 25 (torsion spring &low headroom) A (3200, 3450 or 425) 68 * min. * 80 with low headroom kit Maximum Door Height to suit Operator Booms Torsion Spring Tension and Low Headroom Spring Short Boom 2250 mm 225 mm Medium Boom 2500 mm 2375 mm Long Boom 3000 mm 3000 mm 69

GARADOR GaraRoll Roller Doors GaraRoll Roller Doors GaraRoll Insulated Roller Doors Spring-compensated, automated roller garage door for domestic applications only. All doors are made to suit the opening with the actual door size relating to the structural opening width x height and the guides fitting on the reveals to maintain a full opening size. The GaraRoll is the only roller garage door to include the cover hood, which the curtain rolls into at the head of the garage door opening, as standard. Door curtain 77mm rolled aluminium profile filled with 00% CFC-free polyurethane rigid foam. Integrated windlocks fitted as standard. Surface Colour finish with double layer coil coating quality paint system or foil-coated timber effect finish. Frame Aluminium extrusion profile side guides with integrated plastic runners. Lintel and cover box made of steel. Colour of side guides and lintels supplied to match the door as standard. On timber effect doors inside is dark brown. Cover box coated Grey White (RAL 9002). Counterbalance Tension spring technology with lateral integral double tension springs and double cables encased within a transparent cover. Colours Available in Traffic White (RAL 906), Ruby Red (RAL 3003), Steel Blue (RAL 50), Moss Green (RAL 6005), Terra Brown (RAL 8028), Jet Black (RAL 9005), Anthracite Grey (RAL 706), White Aluminium (RAL 9006), Light Ivory (RAL 05), Cream (RAL 900), Light Grey (RAL 7035), same colour inside and outside. Deco paint doors available in Golden Oak and Rosewood with the same finish inside and out. Foil-coated doors available in Golden Oak and Rosewood, with the inside of the lath in dark brown. Operator and Control Garador operator and control included. 24 V DC gear drive, mains voltage 230-240 V AC, 0.5 kw, opening speed approx. cm/s, integrated door security kit, operator always located on left (viewed from inside), plastic housing. Micro-processor control in separate plastic housing, automatic teaching of auto safety cut-out and travel limits, soft start and soft stop, light, impulse control, adjustable automatic timer (hold-open time 30 sec. after activation, additional photocell required). Included: 2 hand transmitters and integral receiver, connecting lead with CEE plug, control buttons in cover of the control unit, integrated 2-minute garage light in control housing, quick release (operated from inside). Windows Window size approx. 20 x 40 mm, number of windows per door section depends on door width. Windows made of clear synthetic pane with black window frame on exterior, transparent frame on interior. Maximum of 0 window sections per door. Window arrangement: 20 x 40 min. 300 60 80 Packaging GaraRoll doors are supplied in a palleted format shrink wrapped as a complete package. Stock availability All GaraRoll doors are made to order with no standard sizes. Lead-time for all doors is 3 to 4 weeks. 70

GARADOR GaraRoll Roller Doors Remember the GaraRoll door is measured as opening size and not as overall guide width. This not only makes it the same as all other Garador doors for sizing but also will probably reduce the price against other doors as most other door manufacturers calculate the price as over guide width thus making the actual door around 200 mm smaller! Minimum product dimension is 000 mm x 600 mm. Smooth Paint Finish Door width Door height 600 875 2000 225 2250 2375 2500 2625 2670 2750 2875 3000 300 000 250 500 750 900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 290 290 35 35 328 402 45 50 523 60 653 863 90 997 2044 2093 243 290 290 35 35 328 402 45 50 523 60 653 863 90 997 2044 2093 243 290 290 35 35 377 466 49 533 576 660 77 944 964 2086 234 284 2233 290 290 35 35 402 52 549 583 642 747 934 20 203 246 294 2244 2292 290 290 35 35 402 52 549 583 642 747 934 20 203 246 294 2244 2292 379 379 430 430 450 537 589 649 697 807 2009 2049 23 222 227 2320 2367 379 379 430 430 499 584 635 698 763 2002 2089 265 2240 - - - - 379 379 430 430 499 584 635 698 763 2002 2089 265 2240 - - - - - - - - 499 584 635 698 763 2002 2089 265 2240 - - - - - - - - 520 653 697 75 795 2063 237 2227 2272 - - - - - - - - 520 653 697 75 795 2063 237 2227 2272 - - - - - - - - 520 653 697 75 795 2063 237 2227 2272 - - - - Deco Paint Finish Door width Door height 600 875 2000 225 2250 2375 2500 2625 2670 2750 2875 3000 300 000 250 500 750 900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 333 34 374 379 395 478 535 593 623 70 770 988 2043 239 294 225 2309 337 346 380 386 402 486 544 603 634 722 782 2002 2058 255 220 2269 2328 340 349 384 390 456 555 590 64 694 788 855 2092 222 2253 23 237 2430 343 353 388 394 486 606 653 698 767 882 2080 267 297 2323 2382 2442 2500 346 356 392 399 490 6 659 704 774 890 2088 276 2207 2333 2392 2452 25 438 449 52 58 543 64 705 776 836 958 27 2223 236 248 2479 2539 2598 440 452 55 523 597 694 756 832 909 260 2259 2347 2434 - - - - 44 454 57 524 598 696 759 834 92 263 2262 235 2438 - - - - - - - - 60 699 762 838 96 268 2267 2356 2443 - - - - - - - - 627 773 830 897 955 2236 2323 2427 2485 - - - - - - - - 63 778 836 904 96 2243 233 2435 2494 - - - - - - - - 635 782 840 909 967 2249 2338 2442 250 - - - - Deco paint only available in Golden Oak or Rosewood finish. 7

GARADOR GaraRoll Roller Doors Timber effect Finish Door width Door height 600 875 2000 225 2250 2375 2500 2625 2670 2750 2875 3000 300 000 250 500 750 900 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 529 552 60 64 637 74 86 894 940 2047 227 2379 2452 2570 2644 272 2797 542 566 68 633 657 763 84 92 969 2079 26 246 249 262 2688 2766 2845 550 576 629 644 723 847 90 972 2046 264 2252 2528 2576 2736 286 2896 2976 557 585 640 656 763 9 980 2044 237 2279 252 2625 2674 2828 2908 2990 307 565 594 650 668 775 925 995 206 255 2300 2534 2648 2699 2854 2936 3020 302 67 70 788 806 840 966 2053 250 2234 2385 2638 273 2832 2962 3048 332 324 678 70 798 87 906 203 220 222 2324 269 2748 2863 2978 - - - - 682 74 802 822 92 2037 226 2228 233 2627 2756 2872 2987 - - - - - - - - 98 2045 235 2238 2343 2639 2768 2885 3000 - - - - - - - - 954 235 229 232 2396 2725 284 2976 306 - - - - - - - - 965 249 2234 2329 244 2746 2864 2999 3086 - - - - - - - - 975 260 2246 2343 2429 276 2880 308 305 - - - - Timber Effect Foil Coat only available in Golden Oak and Rosewood finish. Options for all GaraRoll doors add Manually operated version Price reduction 54 Removal of barrel casing (optional only on door height 2500 mm and over) Price reduction per m 3 External fit (reverse rolled) 58 Chamfered bottom profile available only in White or Colour. Not available in timber effect finish Ventilation grilles or Glazing element with clear synthetic pane, window section 20 x 40 mm, black glazing frame on exterior, transparent on interior (maximum of 0 sections per door, number of glazing elements dependent on the door width) per m 76 per m 9 Accessories for RollMatic operator add Bi-directional hand transmitter, 4-channel in black 56 Bi-directional hand transmitter mini, 2-channel in black 54 Motor connection line, 0 m - Reference No. 436.523 29 Acoustic door security kit - Reference No. 436.524 49 Emergency battery HNA 8 - Reference No. 437.726 26 Exterior emergency release - Reference No. 436.526 78 Additional fascia panel required when fitting a door within the opening, ordering size will need to be door size plus guide width (price per metre) supplied in colour to match the door / guides 43 All other operator accessories can be combined with GaraRoll roller doors. Please see page 65 to page 68. 72

GARADOR GaraRoll Roller Doors Specifications Roller door fitting dimensions Fitting behind the opening Operator at left inside Required headroom 290 (LH 2300) 335 (LH 230) Fitting depth = required headroom Clear passage height = clear height (ordering size) 60 mm for automated version, 40 mm for manually operated version Clear passage width = clear width (ordering size) Clear height (LH) = ordering size 275 Exterior 230 FFL At least 00 At least 00 Clear width (LB) = ordering size Exterior 35 75 Fitting in the opening Operator at left inside 290 (LH 2300) 335 (LH 230) 5 Fitting depth = required headroom Clear passage height = clear height (ordering size) 60 mm for automated version, 40 mm for manually operated version Clear passage width = clear width (ordering size) Clear height (LH) = ordering size 275 Exterior 230 FFL 5 00 Clear width (LB) = ordering size 00 5 Exterior 35 75 73

GARADOR FrontGuard Entrance Doors FrontGuard Entrance Doors FrontGuard Steel Door FGS Steel door leaf with foam filled core and thermal break, exterior and interior overlapping the leaf, 46 mm thick, in classic, contemporary and modern designs. Standard polyester primer coating White (RAL 906) in a smooth finish (inside and out). Surface Flush fitting door leaf on the interior and exterior of the door, with a leaf frame on the inside and a thick rebate. The flush fit on the interior gives the impression of a residential internal door can be optimally integrated into your house s interior. Colours White (RAL 906) as standard. Optional colours available for all doors: White Aluminium (RAL 9006), Terra Brown (RAL 8028), Clay Brown (RAL 8003), Ochre Brown (RAL 800), Window Grey (RAL 7040), Light Grey (RAL 7035), Anthracite Grey (RAL 706), Moss Green (RAL 6005), Ruby Red (RAL 3003), Light Ivory (RAL 05) and Pigeon Blue (RAL 504). Timber Effect Optional surface finishes available for FGS 00, FGS 05, FGS 700 and FGS 900: Foil-coated timber effect in Golden Oak, Dark Oak, Night Oak, Winchester Oak and foil coated Titan Metallic finish. Seals 4-sided double, black EPDM seals. Brush seal at the bottom, 20 mm high plastic threshold with thermal break. Locks & bolts -point security: 2 conical swing bolts engage with 2 additional security bolts and deadbolt in the frame s lock plates. 3 further security bolts on the hinge side and three barrel hinges. Drip angle Optional, Traffic white (RAL 906). Invisible fastening and plastic cover cap at each end. Hinges Three 2-piece 3-way adjustable hinges with hinge caps in aluminium look. Handles / Letter plates Lever/lever handle set and letter plate in gold or silver to choose as standard on classic designs. Secured by Design handle sets and lever/knob handle sets also available as an option. Contemporary and modern designs all have fixed bar handles on the outside and therefore a key is required to open these doors from the outside at all times. Profile cylinder and keys Cylinder length with fixed bar handles: 27.5 x 35.5 mm. Cylinder length with standard lever/lever or lever/knob handle set: 3.5 x 40.5 mm. Cylinder length with Secured by Design lever/lever or lever/knob handle set: 35.5 x 40.5 mm. 5 keys supplied as standard, 8 or 0 keys available as an option. 74

GARADOR FrontGuard Entrance Doors Windows FGS 200, FGS 400: 24 mm double pane insulated safety glass. Hammered glass design on the inside, clear on the outside. Composite glazing frame, surface-mounted composite rails. FGS 020, FGS 025, FGS 030: 24 mm double pane insulated safety glass. Mastercarré glass design in matt finish on the inside, clear on the outside. Roundstyle composite frame, bonded. FGS 040: FGS 700, FGS 750, FGS 850, FGS 900: 24 mm double pane insulated safety glass. Ornamental glass design on the inside, clear on the outside. Roundstyle composite frame, bonded. Triple pane insulated safety glass, 44 mm thick. Sand-blasted with matt/clear finish stripes inside, clear outside. Flush-fitting glazing frames in stainless steel, bonded. Side elements/transom lights FGS 00, FGS 200: 46 mm thick side element comes with 3 raised panels. FGS 400: 24 mm double pane insulated safety glass Hammered glass design on the inside, clear on the outside. Composite glazing frame, surface-mounted composite rails. FGS 020, FGS 025, FGS 030: 24 mm double pane insulated safety glass. Mastercarré glass design in matt finish on the inside, clear on the outside. FGS 040: FGS 700, FGS 750, FGS 850, FGS 900: Roundstyle composite frame, bonded. 24 mm double pane insulated safety glass. Ornamental glass design on the inside, clear on the outside. Roundstyle composite frame, bonded. Triple pane insulated safety glass, 44 mm thick. Sand-blasted with matt/clear finish inside, clear outside. Flush-fitting glazing frames in stainless steel, bonded. Secured by Design Logo indicates availability of SBD security upgrade, see page 82 for details. Packaging FrontGuard doors are packed with polystyrene around the door and then shrink wrapped. Side elements are transported with glass already fitted. Stock availability Made to order. Approximately 8 weeks lead time. 75

GARADOR FrontGuard Entrance Doors Modern FrontGuard FrontGuard Plus Size (W x H) RAL 906 Colour T-Effect RAL 906 Colour T-Effect FGS 700 000 x 200 00 x 200 563 74 776 900 2078 23 from 875 x 990 up to 250 x 2250 848 2026 206 285 2363 2398 U D -value for size 230 x 280 mm: approx. 0.98 W/(m 2 K) for FrontGuard Plus FGS 750 000 x 200 00 x 200 563 74 776 900 2078 23 from 875 x 990 up to 250 x 2250 848 2026 206 285 2363 2398 U D -value for size 230 x 280 mm: approx. 0.95 W/(m 2 K) for FrontGuard Plus FGS 800 000 x 200 00 x 200 - - - 204 229 2254 from 875 x 990 up to 250 x 2250 - - - 2325 2503 2538 U D -value for size 230 x 280 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 80 000 x 200 00 x 200 - - - 204 229 2254 from 875 x 990 up to 250 x 2250 - - - 2325 2503 2538 U D -value for size 230 x 280 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 850 000 x 200 00 x 200 - - - 2207 2385 249 from 875 x 990 up to 250 x 2250 - - - 2492 2670 2704 U D -value for size 230 x 280 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus FGS 900 000 x 200 00 x 200 704 882 97 204 229 2254 from 875 x 990 up to 250 x 2250 988 266 220 2325 2503 2538 U D -value for size 230 x 280 mm: approx. 0.96 W/(m 2 K) for FrontGuard Plus Secured by Design option available on this door. See page 82 for costs. 76

GARADOR FrontGuard Entrance Doors Contemporary FrontGuard FrontGuard Plus Size (W x H) RAL 906 Colour T-Effect RAL 906 Colour T-Effect FGS 00 000 x 200 00 x 200 874 052 086 2 389 423 from 875 x 875 up to 250 x 2250 58 336 370 495 673 707 U D -value for size 230 x 280 mm: approx. 0.87 W/(m 2 K) for FrontGuard Plus FGS 05 000 x 200 00 x 200 939 7 52 276 454 489 from 875 x 990 up to 250 x 2250 224 402 437 56 739 774 U D -value for size 230 x 280 mm: approx. 0.87 W/(m 2 K) for FrontGuard Plus FGS 020 000 x 200 00 x 200 97 587 622 - - - from 875 x 990 up to 250 x 2250 48 87 906 - - - U D -value for size 230 x 280 mm: approx..4 W/(m 2 K) FGS 025 000 x 200 00 x 200 26 65 686 - - - from 875 x 900 up to 250 x 2250 546 936 97 - - - U D -value for size 230 x 280 mm: approx..4 W/(m 2 K) FGS 030 000 x 200 00 x 200 264 654 689 - - - from 875 x 990 up to 250 x 2250 549 939 974 - - - U D -value for size 230 x 280 mm: approx..2 W/(m 2 K) FGS 040 000 x 200 00 x 200 73 563 598 - - - from 875 x 875 up to 250 x 2250 458 848 883 - - - U D -value for size 230 x 280 mm: approx..2 W/(m 2 K) Secured by Design option available on this door. See page 82 for costs. 77

GARADOR FrontGuard Entrance Doors Classic FrontGuard FrontGuard Plus Size (W x H) RAL 906 Colour T-Effect RAL 906 Colour T-Effect FGS 00 000 x 200 00 x 200 898 076 - - - - from 875 x 990 up to 00 x 286 83 36 - - - - U D -value for size 230 x 280 mm: approx.. W/(m 2 K) FGS 200 000 x 200 00 x 200 989 379 - - - - from 875 x 990 up to 00 x 286 274 664 - - - - U D -value for size 230 x 280 mm: approx..2 W/(m 2 K) FGS 400 000 x 200 00 x 200 058 448 - - - - from 875 x 990 up to 00 x 286 342 732 - - - - U D -value for size 230 x 280 mm: approx..4 W/(m 2 K) Secured by Design option available on this door. See page 82 for costs. 78

GARADOR FrontGuard Entrance Doors Side elements All FrontGuard doors are available with side elements. Side elements may be on the left and/or right hand side of the door. Side elements come in Traffic White, RAL 906 as standard. Side element standard sizes Ordering sizes in mm (W x H) Glass RAL 906 Colour Timber Effect 400 x 200 Mastercarré Clear glass Sandblasted float Ornamental glass 504 Cathedral glass 602 699 732 Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak, Titan Metallic / Titan Metallic CH 703 The Titan Metallic decor film coating will be replaced by Titan Metallic CH 703 decor, available from Autumn 204. Side element special sizes for modern and contemporary designs Ordering sizes in mm (W x H) Glass RAL 906 Colour Timber Effect From 300 x 875 Glass in accordance with 707 8 838 to 500 x 2250 the overview on page 8 to 000 x 2250 2 986 4 7 2 Only possible without transom light. Door set with side element does not have a statics function. Statics must be ensured by the building structure. Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak, Titan Metallic / Titan Metallic CH 703 The Titan Metallic decor film coating will be replaced by Titan Metallic CH 703 decor, available from Autumn 204. Side element special sizes for classic designs Ordering sizes in mm (W x H) Panel / glass RAL 906 Colour From 450 x 960 to 450 x 286 From 450 x 960 to 450 x 286 Panel without glass in accordance with the overview on page 8 Panel with glass in accordance with the overview on page 8 520 67 575 672 79

GARADOR FrontGuard Entrance Doors Transom lights Our FrontGuard doors are availabe with a transom light. It can be arranged above the door or above door and side element(s). Transom lights come in Traffic White, RAL 906 as standard. Transom light Ordering sizes in mm (W x H) Glass RAL 906 Colour Timber Effect From 875 x 300 to 250 x 500 Glass in accordance with 566 664 697 to 750 x 500 the overview on page 8 7 80 842 to 2250 x 500 852 950 982 Decors: Golden Oak, Dark Oak, Night Oak, Winchester Oak, Titan Metallic / Titan Metallic CH 703 The Titan Metallic decor film coating will be replaced by Titan Metallic CH 703 decor, available from Autumn 204. For dimensions please see specifications on page 83 80

GARADOR FrontGuard Entrance Doors Modern Glass Side element Transom light. Clear laminated safety glass / sand-blasted laminated safety glass (without clear stripes) 2. Clear laminated safety glass / clear laminated safety glass Width 300-000 mm Height 990-2250 mm Width 875-2250 mm Height 300-500 mm FGS 700 FGS 750 FGS 850 FGS 900 Contemporary Glass Side element Transom light FGS 00 FGS 05. Clear laminated safety glass / Mastercarré single-pane safety glass 2. Clear laminated safety glass / single-pane safety ornamental glass 504 3. Clear laminated safety glass / sand-blasted laminated safety glass (without clear stripes) 4. Clear laminated safety glass / clear laminated safety glass Width 300-000 mm Height 875-2250 mm Width 875-2250 mm Height 300-500 mm. Clear laminated safety glass / Mastercarré single-pane safety glass 2. Clear laminated safety glass / clear laminated safety glass Width 300-000 mm Height 990-2250 mm Width 875-2250 mm Height 300-500 mm FGS 020 FGS 025 FGS 030. Clear laminated safety glass / single-pane safety ornamental glass 504 2. Clear laminated safety glass / clear laminated safety glass Width 300-000 mm Height 875-2250 mm Width 875-2250 mm Height 300-500 mm FGS 040 Classic Glass Side element Transom light FGS 00 FGS 200. Element with 3 panels 2. Clear laminated safety glass / clear laminated safety glass 3. Clear laminated safety glass / single-pane safety cathedral glass Width panel 450 mm, width glass 300-000 mm Height 990-286 mm Width 875-2250 mm Height 300-500 mm FGS 400. Element with panel and glazing cut-out with clear laminated safety glass / single-pane safety cathedral glass 2. Clear laminated safety glass / clear laminated safety glass 3. Clear laminated safety glass / single-pane safety cathedral glass Width panel 450 mm, width glass 300-000 mm Height 990-286 mm Width 875-2250 mm Height 300-500 mm 8

GARADOR FrontGuard Entrance Doors Options Optional extras Article Aluminium letter plate in gold or silver Lever / lever handle set Secured by Design with drill resistant cylinder escutcheon Outside knob / inside lever in gold or silver Outside knob / inside lever set Secured by Design with drill resistant cylinder escutcheon Price 35 42 40 52 Only available on Classic Range Optional extras Article Spyhole in brass or chrome (for fitting on site, door leaf supplied undrilled) 2 Profile cylinder complete, supplied with 8 keys Profile Cylinder Complete, supplied with 0 keys Price 7 42 62 2 The hole for the spyhole needs to be drilled onsite and the kit needs to be fitted manually. Optional extras Article Electric strike with day catch (separate) Large brushed stainless steel handle Surcharge for standard bar handle Secured by design upgrade 4 Stainless steel cleaner and care product (50 ml) Price 63 02 90 25 3 Upgrade only available. 4 Upgrade available for front door models FGS 00, FGS 200, FGS 00, FGS 05, FGS 030, FGS 040, FGS 700, FGS 900. Upgrade consists of high security cylinder, a safety registration card and three security keys. 82

GARADOR FrontGuard Entrance Doors Specifications FrontGuard Door Specifications Width of transom light Plan view of door with side element Height of transom light Structural opening Overall frame dimension Clear passage Height of door / side element Plan view of door with side element Width of side element Width of door Width of side element Clear passage Overall frame dimension Structural opening All dimensions are overall frame dimensions Plan view of door Roundstyle frame Structural opening Overall frame dimension 64 34 60,5 3,5 Clear passage 45 Side view of door Quadrangular frame 64 Clear passage = RAM 84 Overall frame dimension (RAM) Structural opening = RAM + 0 45 3,5 60,5 83

GARADOR User Information / Care User Information / Care A Garador garage door needs only a minimum level of preparation and maintenance to give years of trouble-free service. Below is a guide to how to get the best from your garage door. Operation For opening the door in manual operation use only the outside handle or inside handle. Never use the pull rope during the opening cycle of the door. For closing the door from the outside the pull rope fixed to the internal handle is only designed to pull the door towards you whilst standing within the entrance of the garage until the door can be pushed down by hand, then using the external handle for final closing. For closing the door from the inside the pull rope already mentioned is designed to be pulled away from you, when facing the front entrance of the garage, until the internal handle is able to be reached, by hand, and used for final closing. The pull rope is not designed to be used for any other part of the operating cycle, or any other purpose. Failure to comply with the above instructions may result in injury to persons or property. When the door is operated from either outside or inside, check the area through which the door will travel is clear from people and objects. Failure to do so may result in injury to persons or property. When closing, ensure the latches engage properly. If the door is power-operated always try to ensure you match the door with a Garador electric operator. Power Operated Garage Doors It is against the Law to install a power operated garage door in the UK without complying with The Machinery Directive. To comply with the Machinery Directive both the door and the operator used in the Installation must have a declaration of Incorporation from the manufacturer. On completion of the installation the Installer must provide a Declaration of conformity and apply a CE mark giving details of the installation to the door/operator combination, which is now classed as a machine. The Installer must issue to the Customer a declaration of conformity on the completion of the installation. The Installer must hold copies of both the Declarations of Incorporation and the Declaration of Conformity on a technical file for inspection by the relevant authorities. If any of the above requirements are not fulfilled the Installation is illegal. Please ensure for your own safety and peace of mind that whoever installs your electric operator is both willing and able to fulfil these requirements; if they are not do not use them!! Members of the DHF CAN and WILL install your operator safely and legally. Cleaning The door and frame if applicable, should be washed with a mild soap-based solution on a regular basis to prevent the build up of dirt, salts and other corrosive substances and help maintain the aesthetic appearance of the product. If the door is installed in a seafront location, the door panel and frame should be cleaned in this way at least every two months. We also suggest that all other components be brushed down on a regular basis to prevent the build up of dirt and dust etc. On GaraRoll roller doors regular removal of dirt and debris is required to avoid damage to laths when the curtain rolls. Locking If the key is turned completely, the door is then locked or unlocked; when unlocked it is then possible to open and close the door by turning the handle. If the key is turned 4 of the way, the door opened and then the key returned to its start position, the door will re-lock when closed. By moving the internal locking snib, it is possible to lock and unlock the door from the inside without using the key. 84 Maintenance If in doubt about any of these maintenance procedures below always consult a Garador specialist. Garador Ltd. has a nationwide network of installers who will be able to offer you a regular maintenance service on your garage door. Please call Garador or refer to the Garador website for further details of your nearest installer. Immediately after the door is fitted and after every 5,000 operations of the door, or at least once a year, oil all pivot points, check screws and clamped connections for tightness, keep the running tracks clean (do not grease them), check parts and replace any worn components where necessary. The springs should be replaced after approx. 25,000 operations by an experienced door fitter (see fitting and operation instructions). Do not oil the lock cylinder; if it is sticking, only lubricate with graphite dust. For canopy doors only, check the cable every 6 months with normal usage (8 operations per day). Have the cables replaced by an expert if any wear is found.

GARADOR User Information / Care Finish Steel Doors The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Garador steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site. Finish Timber Doors Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer s instructions. Failure to follow these instructions will result in early deterioration of the timber panel. Finish GRP Doors GRP door panels should be periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP and should be removed using water as soon as possible. GRP doors should not be painted over. Paint Finish Steel Doors Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties. 85

GARADOR Warranty Warranty Garador products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim. In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Warranty Department at Garador Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details: Your name, address and telephone number 2 Original invoice with date of purchase 3 Product description/door type and product number 4 Description of defect An assessment of the claim will then be made. This may require Garador to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door and on the page opposite and that you follow these instructions throughout. Garador installers Garador Ltd. has a nationwide network of recommended installers who will be able to offer you a regular maintenance service on your garage door. Please call us on 0935 443722 or refer to the Garador website for further details of your nearest installer. Garador Garage Door Warranty Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Garador garage door for a period of 0 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foil-coated timber effect and PVC doors, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 0 year warranty period. Requirements Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty. Performance During the warranty period we undertake to rectify any and all defects to the Garador product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage. Replaced parts become our property. 86

GARADOR Warranty The warranty does not cover damage caused through: normal wear and tear improper installation negligent care and maintenance improper initial and subsequent operation negligent or wanton destruction external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences mechanical damage through improper transport and fitting priming and other surface protection treatments incorrect or too late applied surface protection treatments repair by non-qualified persons using non-garador parts without the approval of the manufacturer Removal of the product number or making it unidentifiable Electric Operator Warranty A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e. g. fuses, batteries, bulbs etc.). For further details please contact us on 0935 443722, or through our website on www.garador.co.uk Warranty GaraRoll Gararoll roller doors are subject to a limited 0 year warranty. The design of these doors represents state of the art technology. Pressure marks and abrasive wear, particularly on the top profiles are a condition of the design and cannot be avoided. They are not considered a reason for complaint. In order to avoid excessive friction, remove any dirt and debris from the door curtain at regular intervals. 87

Extracts from DHF consumer advice GARADOR Extracts from DHF consumer advice The following document was designed by the Association of Garage Door Specialists, updated by the DHF and endorsed by all major UK garage door manufacturers, as a guide for purchasers of domestic garage doors. Visual Appearance of Garage Doors A new garage door can be a significant investment that will transform the appearance of your home. This information is a guide to the quality you can expect. The Quality Check The quality check should be carried out in natural daylight, not direct sunlight. Stand at a distance of 3 metres from the door to view the overall appearance. The door is acceptable if, taking into account the facts below, none of the following are readily visible on the face of the door: Marks or distortion associated with the manufacturing process Minor indentations, marks or scuffs on the surface Paint or stain blemishes The Facts Steel Doors Panel Distortion The rolling or pressing of steel panels during manufacture will cause distortion in the steel and while every effort is made to keep this to a minimum, inevitably some visible distortion will remain. The application of high gloss paints will make this slight distortion more apparent, especially under certain lighting conditions, such as car headlamps, or bright sunshine. Paint Finish Primed doors the primer coating is applied as a base coat only and as such requires additional finishing with a good quality exterior paint. Any marks or scratches on the primer coat should be rubbed down and repainted as part of this finishing process. Finished doors the factory application of the paint finish is an automated process and this may result in minor blemishes or slight inconsistencies in the paint, particularly in the area of panel joints. Timber Doors Timber Timber is a natural product and there will be variations in pattern, colour, shading and grains. No two doors will be the same. Wood naturally expands and contracts according to environmental conditions, joints will open and close and some minor curvature may occur. Finishing It is vital that timber doors are fully finished as per the manufacturers instructions before exposure to the elements. GRP and composite Plastic Doors Mould Marks GRP doors are individually handcrafted in a mould and are then hand finished. Some minor marks and blemishes will inevitably remain after this process. Translucency When viewed from the inside, it is often possible to see variations in the translucency of the door, particularly around and between areas of relief. Such variations do not detract from the overall strength or build quality of the door. All Doors Colour Match Pairs of doors should be ordered together to obtain the best colour match, bearing in mind the limitations of the materials used in the construction. Timber garage doors cannot be ordered as matching sets. 88

GARADOR Extracts from DHF consumer advice Size Variations As the size of a door changes in height and/or width, the panel frequency and profile can change, therefore doors of the same style but of different sizes can be significantly different in appearance. Clearances All doors require operating clearances, i.e. the gap between the door panel and the, these are inbuilt during manufacture and should not be reduced by means of infills, or draughtproofing. Deflection When in the open position, all doors will display a level of vertical deflection or sag across the width of the panel. Individual manufacturers specifications should be consulted for exact tolerances. 89

GARADOR For your Notes 90

GARADOR For your Notes 9

Bunford Lane, Yeovil, Somerset, BA20 2EJ Tel: (0935) 443722 Fax: (0935) 443744 www.garador.co.uk Garador is the UK s leading manufacturer of garage doors and operators, with an ultra-modern production facility located in Somerset. We use German engineering expertise to produce highly sophisticated doors and operators. By purchasing a Garador product you can be assured of the highest level of quality, safety and security. With a nationwide network of stockists, installers and service technicians we are an ideal partner for your project.