TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual and triple output models Universal input 90 VAC, 0 Hz EMI meets EN 0, class B and FCC, level B Protection class ll for TML 0 models Short circuit and overload protection -year product warranty Also see: TMLM Series, to 0 Watt highest power density, PCB mount. www.tracopower.com/products/tmlm.pdf Referance datasheet for primary TML models, see: www.tracopower.com/products/tml-primary.pdf (not recommended for new design in) The TML series are ultra compact AC/DC power supplies in a fully encapsulated plastic case. They feature versions with screw terminals for easy installation or with solder pins for direct PCB mounting. International safety approvals qualify this product for worldwide markets. The TML series AC/DC modules offer an interesting solution for many space critical applications in commercial and industrial electronic equipment. 0 Watt Models Order code Output Output Output Output PCB mount Chassis mount power max. TML 00 TML 00C.9 W. VDC/00 ma TML 00 TML 00C.0 VDC/000 ma TML 0 TML 0C VDC/0 ma TML 0 TML 0C VDC/0 ma TML 0 TML 0C 0 W VDC/0 ma TML 00 TML 00C +.0 VDC/000 ma.0 VDC/000 ma TML 0 TML 0C + VDC/ ma VDC/ ma TML 0 TML 0C + VDC/ ma VDC/ ma TML 0 TML 0C VDC/00 ma + VDC/0 ma VDC/0 ma TML 0 TML 0C VDC/00 ma + VDC/00 ma VDC/00 ma http://www.tracopower.com Page of
0 Watt Models Order code PCB mount Input Specifications Input voltage ranges AC input 90 VAC DC Input 00 VDC Input frequency Input current at full load ( VAC / 0 VAC nominal input) Leakage current External fuse (required) Output Specifications TML Series 0 & 0 Watt 0 Hz TML 0 models: 00 ma / 0 ma max. TML 0 models: 0 ma / 0 ma max. 0. ma max. TML 0 models:.0 A slow blow type (recommendation) TML 0 models:. A slow blow type (recommendation) Voltage set accuracy TML 00 model: ±% TML 0 models: ± % TML 0 single and symetric dual output models: ± % TML 0 asymetric dual and triple output models: ± % for output, ± % for output & Minimum load TML 0 single and dual output models: 0 % TML 0 triple output models: 0 % (each output) TML 0 single output models: % TML 0 symetric dual output models: 0 % (each output) TML 0 asymetric dual and triple output models: % (each output) operation at lower load condition will not damage these power supplies, how ever, they may not meet all listed specifications. Ripple and noise (0 MHz bandwidth) Regulation Input variation Chassis mount Output power max. TML 00 TML 00C. W. VDC/000 ma TML 00 TML 00C.0 VDC/000 ma TML 0 TML 0C VDC/ ma TML 0 TML 0C VDC/ ma TML 0 TML 0C VDC/ ma Output Output Output TML 00 TML 00C +.0 VDC/000 ma.0 VDC/000 ma 0 W TML 0 TML 0C + VDC/ ma VDC/ ma TML 0 TML 0C + VDC/ ma VDC/ ma TML 0 TML 0C *.0 VDC/000 ma * VDC/0 ma TML 0 TML 0C *.0 VDC/000 ma * VDC/ ma TML 0 TML 0C *.0 VDC/000 ma + VDC/00 ma VDC/00 ma TML 0 TML 0C *.0 VDC/000 ma + VDC/00 ma VDC/00 ma * Output floating TML 0 models: <0. % of Vout +90 mv [Vp-p] TML 0,. VDC model: <0 mvp-p TML 0 other models: < % of Vout [Vp-p] single and symetric dual output models: 0. % (each output) TML 0 triple output models: % for output, % for output & TML 0 asymetric dual and triple output models: 0. % for output, % for output & All specifications valid at nominal input voltage, full load and + C after warm-up time unless otherwise stated. http://www.tracopower.com Page of
Output Specifications Regulation Load variation Current limitation Overvoltage protection by Zehner diode (main output only) Short circuit protection Overtemperature protection (TML 0 models only) Max. capacitive load [µf] General Specifications TML Series 0 & 0 Watt TML 0 single output models: %, 0 00 % load TML 0 dual output models: % (each output), 0 00 % symetric load TML 0 triple output models: % for output, 0 00 % load % for output &, 0 00 % symetric load TML 0 single output models: 0. % 00 % load TML 0 symetric dual output models: % (each output), 0 00 % symetric load TML 0 asymetric dual output models: % for output, 00 % load % for output, 00 % load TML 0 triple output models: % for output, 00 % load % for output &, 00 % symetric load above 0 % of rated output current. 0 % of Vout typ. hiccup mode, indefinite (automatic recovery) at +00 C Temperature ranges Operating TML 0 models: C to +0 C TML 0 models: 0 C to +0 C Power derating above +0 C.0 %/K Case max. TML 0 models: +9 C Storage (non operating) 0 C to + C Temperature coefficient Efficiency Humidity (non condensing) Switching frequency (pulse width modulation PWM) Hold-up time 0.0 %/ C % (depending on model) 9 % rel max. TML 0 models: 00 khz typ. TML 0 models: khz typ. 0 ms min. Isolation voltage Input/Output 000 VAC Reliability /calculated MTBF (MIL-HDBK-F, at + C, ground benign) EMI / RFI conducted >00 000 h EMC compliance EN 0 Model series Output: TML 0 TML 0 Single output models Dual output models symetric Dual output models asymetric Triple output models. VDC 000 0 000.0 VDC 000 0 000 VDC 90 00 VDC 0 00 VDC 00 00 +.0 /.0 VDC 00 / 00 000 / 000 + / VDC 0 /0 00 / 00 + / VDC 0 /0 000 / 000 +.0 / + VDC 0 000 / 0 +.0 / + VDC 0 000 / 00 +.0 / + / VDC 00 / 0 / 0 0 000 / 0 / 0 +.0 / + / VDC 00 / 0 / 0 0 000 / 900 / 900 EN 0, class B, FCC part, level B Protection class class II to IEC/EN 0 All specifications valid at nominal input voltage, full load and + C after warm-up time unless otherwise stated. http://www.tracopower.com Page of
General Specifications TML Series 0 & 0 Watt Safety standards UL/cUL 090-, IEC/EN 090- Certification documents www.tracopower.com/overview/tml Casing material plastic resin + fiberglass (UL 9V-0 rated) Environmental compliance Reach www.tracopower.com/overview/tml RoHS RoHS directive 0//EU Outline Dimensions TML 0 models for PCB mount: (.9).0 0.0 0.0 (0.9) (0.9) Bottom view.... (0.) (0.) (0.) (0.) (0.9).0.0.0 (.) (0.) 0.0 (.).0 (0.).0 (0.) Pin diameter ø.0 mm (0.09) Weight: 0 g (.9 oz) TML 0C models for chassis mount: Pinout / Connection. (.09).0 (0.) Pin/ Single Dual con. output output FG Triple output AC in (N) AC in (L) no pin / nc no pin / nc Vout.0 (0.) x ø. ( x ø0.) Vout Vout com. / no pin com. / Vout +Vout +Vout Vout. (.).0 (.) Top view no pin no pin +Vout nc = not to connect.0.0 (0.0) 9.0 (.) (.) Weight: g (. oz) Dimensions in[mm], () = Inches Tolerances = 0.mm (0.0) http://www.tracopower.com Page of
TML Series 0 & 0 Watt Outline Dimensions TML 0 models for PCB mount: (.0). (.0). Bottom view.. (0.0) (0.0). (0.0) (.). (0.0)... (.0) (0.) 9.0 (.0).0 (0.9).0 (0.) Pin diameter ø. mm (0.0) Weight : 0 g (9.9 oz) TML 0C models for chassis mount: Pinout / Connection Pin/ Single Dual sym. Dual asym. Triple. (.). (0.) con. output output output no pin / nc output AC in (L) AC in (N) +Vout Vout +Vout Vout. (0.) x ø. ( x ø0.) no pin / nc no pin / nc +Vout +Vout Vout com. / Vout com. / no pin / nc no pin / nc Vout Vout nc Vout no pin / nc Vout. (.0) 0.0 (.9) Top view nc = not to connect.0 00.0 (.9) (0.).0 (.) Weight : g (. oz) Dimensions in[mm], () = Inches Tolerances = 0.mm (0.0) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. October. 0 Page of