Technical manual for ordering and installation DORMA MANET Single-point fixings for interior applications
MANET Glass design system DORMA MANET Today s approach to office design tends to be generously appointed, open-plan layouts. One of the basic underlying principles in this regard is that, in order to be effective in business, you need a clear view of everything that is happening. Consequently, flexible glass partitions and doors are becoming the preferred solution for internal spatial division. Thanks to the flexible modularity of the system, DORMA MANET offers architects and specifiers a free hand in creative almost bespoke design with space, vision and light as a foundation. The basic component is the single-point fixing which is countersunk into the glass and provides for a perfectly flush finish in all applications. In addition to the countersunk version, however, the system now also offers a new alternative, i.e. whereby the single-point fixing is clamped to the glass surface. When using these mounting elements, glazing systems of 8 mm thickness as well as the usual 10 and 12 mm thicknesses are available as standard applications for sliding doors. Adjustable angle connectors provide for reliable attachment to existing structural components or glass-to-glass combinations, with integrated pivoting and sliding door elements complimenting the system. Just as visually effective are the MANET COMPACT standardised sets from the DORMA MANET family. These facilitate single, fast planning of the more popular system types with 8, 10 or 12 mm glass for doors and 10 and 12 mm glass for overpanels and side panels. Optional accessories are available for increased design variety within the individual sets. The system components come with numerous adjustment possibilities in order to ensure problem-free installation of the sliding, double action or single action doors. Wall abutment profiles/ connectors (for attaching the overpanel and side panel screens to the existing structure) may need to be provided. All the elements including the pull handles are available in an elegant mock stainless steel finish (1.405). In applications involving corrosive atmospheres, many fittings are also available in stainless steel 1.4404. Needless to say, all DORMA systems are protected by proprietary rights worldwide. We will be glad to provide you with information concerning relevant patents, e.g. PCT/EP0/04299, PCT/EP01/04255 etc. on application. 2 07/04
Content Page Single-point fixing 4-5 Connection system 6-9 Pivoting door system 10-17 Sliding door system 18-1 Handle bars/door knobs 2-4 Installation tools/ accessories 5 MANET COMPACT sets Pivoting door Sliding door 6-45 07/04
MANET Single-point fixing Single-point fixing serie S2/5 The basic component within the MANET system is the single-point fixing a basic rather than cylindrical bore in the glass, has a tapered countersunk bore for a perfect seated fit to the glass. These give a flush finish of the singlepoint fixing in all applications. The three-dimensional adjustability incorporated within the fitting ensures ideal compensation for structural and drilling tolerances. Constraint-free transmission of all the forces acting on the glass to the substructure is also ensured. Components 1 Clip-on cover 2 Pin internal thread Conical sleeve 4 Gasket 5 Fixing 6 Adjustment screw Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug. Wallplug on site to suit wall construction. Installation and adjustment 1 2 -dimensional adjustment Aperture for post-installation adjustment of screw Post-installation adjustment of ± 2 mm horizontally and vertically by rotating the oblong hole. 4 5 6 Adjustment screw allows offset from wall to be altered depending on type of fitting. Transfer the drilling points from the installation drawing to the wall. Drill anchor holes for wall plugs. Undo adjustment fastener and secure to the wall. Only lightly tighten fastener so that it can still be moved. Mount the fixing and washer and fit the glass. Undo the adjustment fastener and then secure in final position. Align single-point fixings and secure with grub screw. Fit tapered nut and clamping ring and tighten with special wrench (tightening torque 15 Nm). Clip on covers. 4 07/04
Type and ordering information Ø 2 Ø 5 Ø 2 Ø 5 Ø 2 Ø 5 Ø 2 Ø 5 8.5-11.5 14.5-22.5 Glassthickness Glassthickness 11.5-14.5 Glassthickness Glassthickness 6 adjustable adjustable adjustable not adjustable Single-point fixing, Glass/Wall Glass/Wall offset adjustable 8.5-11.5 mm Single-point fixing, Glass/Wall Glass/Wall offset adjustable 11.5-14.5 mm Single-point fixing, Glass/Wall Glass/Wall offset adjustable 14.5-22 mm Single-point fixing, Glass/Wall Glass/Wall offset 6 mm not adjustable Complete fitting Complete fitting Complete fitting Complete fitting Glass thickness 10 mm: Order No. 8.29.200.700.99 Glass thickness 10 mm: Order No. 8.29.201.700.99 Glass thickness 10 mm: Order No. 8.29.202.700.99 Glass thickness 10 mm: Order No. 8.29.205.700.99 Glass thickness 12 mm: Order No. 8.29.210.700.99 Glass thickness 12 mm: Order No. 8.29.211.700.99 Glass thickness 12 mm: Order No. 8.29.212.700.99 Glass thickness 12 mm: Order No. 8.29.215.700.99 Glass thickness 1.5 mm: Order No. 8.29.240.700.99 Glass thickness 1.5 mm: Order No. 8.29.241.700.99 Glass thickness 1.5 mm: Order No. 8.29.242.700.99 Glass thickness 1.5 mm: Order No. 8.29.24.700.99 Glass thickness 15 mm: Order No. 8.29.244.700.99 Glass thickness 15 mm: Order No. 8.29.245.700.99 Glass thickness 15 mm: Order No. 8.29.246.700.99 Glass thickness 15 mm: Order No. 8.29.247.700.99 Glass thickness 17.5 mm: Order No. 8.29.248.700.99 Glass thickness 17.5 mm: Order No. 8.29.249.700.99 Glass thickness 17.5 mm: Order No. 8.29.250.700.99 Glass thickness 17.5 mm: Order No. 8.29.251.700.99 07/04 5
MANET Connection system Connection system The system approach is very much in evidence in the case of the interconnecting components. Elements such as clamping and angle connectors of various designs and also interconnecting fasteners of various lengths can be combined in order to attach glass of different thicknesses at any required angle to the floor, to ceilings, to walls and to plinth supports. Single-point fixings flush with the glass are also used for this interconnection and glass-to-glass system. Tolerances are compensated by sloted holes in the interconnecting fasteners. 1 2 4 1 Pivoting glass clamp Glass thickness 8-12 mm Order No. 8.29.160.700.99 Glass thickn. 1.5-17.5 mm Order No. 8.29.162.700.99 Glass thickn.17.5-21.5 mm Order No. 8.29.16.700.99 2 Pivoting wall fixing Order No. 8.21.141.700.99 Column Ceiling/floor fixing Order No. 8.21.146.700.99 4 Clamping connector Glass thickness 8-12 mm Order No. 8.29.149.700.99 5 52.5 mm 82 mm 5 Connecting rod Length 52.5 mm Order No. 8.21.01.002.40 60 mm 10 mm Length 60 mm Order No. 8.21.01.004.40 Length 82 mm Order No. 8.21.01.00.40 Length 10 mm Order No. 8.21.01.005.40 6 07/04
Connection system A 90-180 Glass/Glass Connector for double panel C B 90-180 Glass/Wall A Complete fitting Glass/Glass 8-12 mm Glass thickness With connecting rod 52.5 mm Order No. 8.29.120.700.99 A Glass / Glass ø6 ø2 ø20 With connecting rod 60 mm Order No. 8.29.122.700.99 With connecting rod 82 mm Order No. 8.29.125.700.99 Connecting rod 52.5 / 60 / 82 / 10 mm 28 Glass thickness With connecting rod 10 mm Order No. 8.29.10.700.99 B Glass / Wall ø20 ø 6 B Complete fitting Glass/Wall 8-12 mm glass thickness Connecting rod 52.5 / 60 / 82 mm 2.5 Wall With connecting rod 52.5 mm Order No. 8.29.19.700.99 C Glass thickness With connecting rod 60 mm Order No. 8.29.140.700.99 Glass thickness Components and assembly of the glass fixing 1 2 Glass 4 120 Glass 7 8 ø 2 Connecting rod see page 6 With connecting rod 82 mm Order No. 8.29.142.700.99 C Connector Complete fitting for Glass thickness 8-12 mm Material 1.405 Order No. 8.29.148.700.99 Order No. 8.29.68.700.99 Components and assembly of the wall fixing 8 Connecting rod see page 6 adjustable via oblong hole 9 5 grub screw 10 Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug. 6 11 2-dimensional adjustment adjustable via oblong hole Wallplug on site to suit wall construction. Components 1 Clip-on cover 2 Connecting bolt Conical collar 4 Conical sleeve 5 Gasket 6 Pivoting clamp 7 Connecting bolt 8 Connecting rod to suit length 9 Connecting bolt 10 Pivoting clamp 11 Fixing plate 07/04 7
MANET Connection system Connection system with clamping disc A Clamping connector Complete fitting Glass thickness 8-12 mm Order No. 8.29.149.700.99 A B C Single-point countersunk B Corner connector 90 Glass/ceiling, Glass/floor connection A Components/ Installation Connecting rod or steel cable 1 2 ø20 28 28 ø6 Complete fitting Glass thickness 8-12 mm (only supporting function) Order No. 8.29.145.700.99 C Ceiling fixing (bearing function) Complete fitting Glass thickness 8-12 mm Order No. 8.29.7.700.99 with clamping disc Order No. 8.29.8.700.99 adjustable via oblong hole B 4 Hanging glass from the ceiling is permissible where there is other support for the glass sheet. 2-dimensional adjustment Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug. Grub screw 4 5 Wallplug on site to suit wall construction. 6 7 Components 1 Connecting bolt 2 Pivoting clamp Connecting bolt 4 Gasket 5 Pivoting clamp 6 Fixing plate 7 Column C Clip-on cover Height adjustment via grub screw Single-point fixing countersunk Single-point fixing clamping disc Fixing with cheesehead screw DIN 7984 M10 x..., or oval-head wood screw DIN 7996 8 x... depending on ceiling fixing requirements and wallplug type (by others) 8 07/04
Glass preparation for single-point fixings and corner connections For ESG and VSG out of ESG. Recommended centres for fixed glazing element max. 800 ±0. max. 800 ±0. ±0. Countersunk holes for countersunk single-point fixings 90 ø2 +0.2-0.2 ø26 Cylindrical bore for clamping disc single-point fixings ø26 +0.2 Glass thickness Glass thickness Dimension A Dimension A 90 Dimension B 28 Angle Wall Dimension B Connecting rod Dimension A Connecting rod 28 2.5 Plan view Corner connectors Glass/Glass 90-180 Angle Connecting rod Dimension B 28 Corner connectors Glass/Wall 90-180 Dimensions in mm Corner connectors Glass/Glass Angle 90 95 100 105 110 115 120 125 10 15 180 A/B 75 70 66 62 59 55 52 49 47 44 Glass/Wall Angle 90 Length of Connecting rod 52.5 60 82 10 Dimensions for 10 mm glass thickness (consider other glass thicknesses). A/B 80 75 71 67 6 60 56 54 51 48 A/B 96 90 85 81 77 7 69 66 6 60 A/B 50 Length of Connecting rod 52.5 60 82 Dimensions for 10 mm glass thickness (consider other glass thicknesses). A/B A/B A/B 67/65 72/70 87.5/86 Clamping connector 150 Ensure compliance with minimum glass/bore clearances as per glass manufacturer recommendations 28 Cylindrical bore Ø15 28 60 Corner connector glass/ceiling Corner connector glass/floor Ceiling fixing (bearing) Ceiling 28 41,5 72 75 72 75 65 5 67 Decke 28 KS Floor Vertically adjustment ± 2.5 Glass thickness Glass preparation with a tolerance of max. ± 0. mm is recommended. 07/04 9
MANET Pivoting door system Pivoting door system MANET pivot (swing) doors are used both in glass partitions and in wall openings. They can be of either single or double action design with weights up to max. 80 kg. Here, too, the single-point fixings feature the new clipon cover system for simple installation. The "Variant 1" swing door pivot assembly has been modified in its design so that the pivot point lies in the glass pane. The air gap thus achieved reduces the nip hazard to a minimum. The clamp fittings can be adjusted to any location along the pivot rod, providing a major advantage when it comes to compensating for glass drilling tolerances. These pivot doors can be integrated with ease in glass wall constructions through the use of system fanlight and side screen connectors. Variant 1 Variant 2 and Variant 1 Pivot bearing with clamp fixings and pivot point in the glass plane Variant 2 Pivot bearing with full-length pivot rod Variant a Pivot bearing short type Variant b Pivot bearing short type with intermediate tube 10 07/04
Components pivoting door system suitable to Variant 1 A m/6m Sliding track tube Endpiece B 55 Glass thickness 25 77 A Sliding track tube incl. endpiece stock length m Order No. 8.21.527.700.99 fix length up to 6 m Order No. 8.21.46.700.99 B Overpanel pivot bearing with location of stiffening pipe C D ø46 28 Ceiling ø15 28 ø46 for 10 mm glass Order No. 8.29.404.700.99 for 12 mm glass Order No. 8.29.405.700.99 C PT 25 Zapfen for ceiling connection, 15 mm Ø, with plug Order No. 8.01.115.000.99 Adjustable ± 1.5 E 12 77 Glass thickness Glass thickness D Pivot bearing for overpanel and ceiling connection for 10 mm glass Order No. 8.29.408.700.99 for 12 mm glass Order No. 8.29.409.700.99 E Clamp fixing horizontal sleeve type Order No. 8.29.150.700.99 ø 5 ø 2 Glass adapter for clamp fixing for 10 and 12 mm glass Order No. 8.29.220.700.99 Fixing with grub screw F Length order-related F Pivot pole for pivot door with clamp fixing, prepared for pivot bearing Order No. 8.29.27.700.99 G 28 Glass thickn. G Pivot bearing for DORMA BTS/ Floor pivot for 10 mm glass Order No. 8.29.406.700.99 12 77 for 12 mm glass Order No. 8.29.407.700.99 ø46 28 07/04 11
MANET Pivoting door system Components pivoting door system suitable to Variant 2 and A Glass thickness 115 A Overpanel/sidepanel connector with pivot bearing location, Complete fitting for 10 and 12 mm glass Order No. 8.29.0.700.99 Order No. 8.29.62.700.99 18.5 B Pivot bearing for overpanel and ceiling connection Order No. 8.21.10.700.99 Order No. 8.21.50.700.99 B 18.5 C Pivot pole, (Variant 2), drilled, fix length Order No. 8.21.00.700.99 Order No. 8.21.40.700.99 77 Single-point fixing, countersunk, fixed 1 for 10 and12 mm glass Order No. 8.29.460.700.99 Order No. 8.29.461.700.99 C Variant 2 Variant a b 2 8 for 1.5-15.5 mm glass Order No. 8.29..700.99 Single-point fixing, countersunk, centring 2 for 10 and 12 mm glass Order No. 8.29.462.700.99 Order No. 8.29.46.700.99 for 1.5-15.5 mm glass Order No. 8.29.455.700.99 2 2 Intermediate tube ø2 Pivot pole set, top/bottom, shorttype incl. 4 single-point fixings for Variant a Order No. 8.29.02.700.99 Order No. 8.29.42.700.99 for Variant b Order No. 8.29.0.700.99 Order No. 8.29.4.700.99 D 1 89 Intermediate tube f. variant b fix length up to 2 m Order No. 8.21.05.700.99 Order No. 8.21.45.700.99 stock length 1.92 mm Order No. 8.21.04.700.99 Order No. 8.21.44.700.99 76 18.5 D Pivot bearing for DORMA BTS/floor pivot Order No. 8.21.11.700.99 Order No. 8.21.51.700.99 12 07/04
Components pivoting door system suitable to Variant 2 and 115 9 Glassthickness Pivot bearing location for overpanel for 8-12 mm glass, Order No. 8.29..700.99 Order No. 8.29.5.700.99 105 46 76 Pivot bearing for RTS Order No. 8.21.14.700.99 Ceiling ø40 28.5 Eccentric bushing for pivot bearing for ceiling connection Order No. 8.05.194.000.99 40 120 Overpanel-sidelight connection for 10 and 12 mm glass, Order No. 8.29.20.700.99 Order No. 8.29.60.700.99 120 Overpanel-sidelight connection with stop inside for 10 and 12 mm glass, Order No. 8.29.22.700.99 40 Glassthickness Glassthickness Glassthickness Glassthickness 40 120 Overpanel-sidelight connection with stop outside for 10 mm glass, Order No. 8.29.24.700.99 for 12 mm glass, Order No. 8.29.25.700.99 07/04 1
MANET Pivoting door system Components pivoting door system suitable to variant 2 and A F D B E C 7.5 7.5 7.5 7.5 7 7 8 65 65 8 70 70 70 70 A 120 9.5 Glassthickn. 115 B Overpanel/sidelight connector for glass fixing 90 offset, with pivot bearing location, complete fitting for 10 and 12 mm glass, A right hand Order No. 8.29.1.700.99 B left hand Order No. 8.29.2.700.99 C 120 D Overpanel/sidelight connector for wall fixing 90 offset, with pivot bearing location, complete fitting for 10 and 12 mm glass, C right hand Order No. 8.29.28.700.99 D left hand Order No. 8.29.29.700.99 E 120 F Overpanel/sidelight connector for wall fixing 90 offset, complete fitting for 10 and 12 mm glass, E left hand Order No. 8.29.27.700.99 F right hand Order No. 8.29.26.700.99 14 07/04
Components pivoting door system (universally applicable) 15 2.5 Floor pivot Order No. 8.01.106.700.99 92 9 Ceiling 40 Stop for pivot door with ceiling mounting Order No. 8.21.4.700.99 5 0 40 Stop at overpanel (inside/outside) for 10 and 12 mm glass, Order No. 8.29.5.700.99 Glassthickness 0 65 7 6 11 Corner lock top/bottom for 8-12 mm glass, Order No. 8.14.400.700.99 7 Floor Glass thickness Corner lock top/bottom with profile cylinder rose on inside for 8-12 mm glass, Order No. 8.14.405.700.99 21 12 Profile cylinder for corner lock Order No. 8.14.206.000.99 7 Floor Glass preparation 65 mm A B ø40 28.5 Floor A Eccentric bushing for corner lock Order No. 8.05.194.000.99 B Bushing, plastics Order No. 8.00.110.1.2 55 mm 65 mm 10 (12) mm C Ø 15.5 94 2 C Strike plate Order No. 8.05.190.000.99 07/04 15
MANET Pivoting door system Glass preparation pivoting door system variant 1 Detail A Detail A PT 25 Countersunk holes Glass thickness Ø26-0,2 55 55 55 5 Detail C 5 12 65 55 65 Glass cut-out 12 90 Ø2+0,2 5 5 Detail B Detail B Detail C Detail D Detail D 55 55 Detail E 55 55 Detail E 55 Glass cut-out 12 55 Detail E Door height Overall length of pivot pole = Door height - 190 max. 550 max. 550 max. 550 12 Glass cut-out 6 8 12 65 19 r = 7 OKF Glass 55 7 BTS 55 Countersunk holes 16 07/04
Glass preparation pivoting door system variant 2 and Detail A Detail A door to wall Detail A door to sidelight 8 5 65 65 Detail B Detail C Detail B door to wall 70 70 Detail B door to glass Countersunk holes Glass thickness 8 8 65 65 Ø26-0,2 Detail D 50 67 Detail E Detail D 120 120 Detail E 40 Detail E Overall length of pivot rod = Door height - 54 mm 65 5 24 11 11 11 40 50 11 40 11 120 90 Ø2+0,2 50 40 89 11 X1 = ± 0, X2 = ± 0, X = ± 0, 7 OKF 67 50 Detail E with stop 67 50 120 40 65 Glass 18,5 BTS 07/04 17
MANET Sliding door system Sliding door system The MANET sliding door system integrates perfectly and with the utmost elegance within this type of partitioning concept. The main components include not only the stainless steel track rail but also the roller carrier with its modified single-point fixing for connection to the glass. The configuration possibilities include in line systems and curved systems using curved glass. The range includes both the flush-mounted and the clamp single-point fixing options. Thanks to its high degree of versatility, the sliding door system allows plenty of scope for individual creativity. In addition to the standard variants in glass partitions, curved sliding doors can also be provided, as can bi-parting sliding doors and parallel sliding doors. The fixings are designed for a maximum door weight of 100 kg. Stoppers positioned on the track rail serve to limit the door travel. Variant 1 Variant 2 and Variant 1 System with clamp-fitted tubular track rail Variant 2 System with correspondingly drilled track rail for wall and glass attachment Variant System of modified design and with clamp-fitted tubular track rail outside view outside view outside view inside view inside view inside view 18 07/04
Components sliding door system suitable to variant 1 Components J Glass thickness 2 27.5 A Clip-on cover B Pin internal thread 5 C Conical sleeve I 60 D Gasket 29 50 E Fixing with oblong hole H F Mounting adapter 55 G Sliding door cover A H Logo plate B C D E F G Glass thickness Heightadjustment ± 2.5 mm I Antijump mechanism J Sliding track tube ø55 Sliding door roller with antijump mechanism only lug with roller Order No. 8.29.414.700.99 201 2 piece single-point fixing for sliding door roller: 55 countersunk f. 10 mm glass Order No. 8.29.416.700.99 countersunk f. 12 mm glass Order No. 8.29.417.700.99 Sliding track tube incl. endpiece m/6m stock length m Order No. 8.21.527.700.99 Order No. 8.21.50.700.99 fix length 6 m Order No. 8.21.46.700.99 Order No. 8.21.52.700.99 Curve length Sliding track tube bent Note! Closed-type clamp mountings cannot be used with a curved tubular track. r = min. 600 mm max. curve length 2.6 m Order No. 8.21.409.700.99 max. curve length 5.6 m Order No. 8.21.41.700.99 07/04 19
MANET Sliding door system Components sliding door system suitable to variant 1 ø5 2 Cylinder screw DIN 6912 M8 x...(a2/a4) Wall adapter for clamp fixing Order No. 8.29.218.700.99 Glassthickness ø5 60 Glass adapter for clamp fixing for 10 and 12 mm glass Order No. 8.29.220.700.99 2 2 Clamp horizontal sleeve type Order No. 8.29.150.700.99 2 Clamp horizontal open Order No. 8.29.151.700.99 2 Clamp vertikal sleeve type Order No. 8.29.152.700.99 ø80 100 Ceiling retainer for sliding track tube, carrying function Order No. 8.29..700.99 40 Recommended distance of the fixing points see page 28/29 20 07/04
Components sliding door system suitable to Variant 1 ø21 5 40 40 Connection for sliding track tube Order No. 8.29.506.700.99 9 Adjustment ± 5 28 ø5 Wall fixing for sliding track tube with thread insert Order No. 8.29.445.700.99 Wall fixing Thread insert The sliding track tube has to be shorten by 28 mm Thread insert Order No. 8.29.505.700.99 85.5 2 Connector 90 outside, for sliding track tube with thread insert Order No. 8.29.21.700.99 85.5 7.5 7.5 2 Connector 90 inside, for sliding track tube with thread insert Order No. 8.29.20.700.99 15 2 71 Connector 15 outside, for sliding track tube with thread insert Order No. 8.29.26.700.99 71 15 48 2 48 Connector 15 inside, for sliding track tube with thread insert Order No. 8.29.25.700.99 07/04 21
MANET Sliding door system Components sliding door system suitable to variant 2 A B C D Glassthickness 18.5 27.5 Components A Clip-on cover B Cylinder screw 5 C Pin internal thread E F G 60 5 50 D Conical sleeve E Screw bolt F Antijump mechanism G Track 55 Glass thickness Heightadjustment ± 2.5 mm Sliding door roller with antijump mechanism only lug with roller Order No. 8.29.400.700.99 Order No. 8.29.401.700.99 ø55 2 piece single-point fixing for sliding door roller: 198 countersunk f. 8-12mm glass Order No. 8.29.40.700.99 Order No. 8.29.41.700.99 clamping disc f. 8-12mm glass Order No. 8.29.42.700.99 55 countersunk for 1.5-17.5 mm glass Order No. 8.29.45.700.99 countersunk f. 19 mm glass Order No. 8.29.47.700.99 The track rail is prefabricated per customer specifications/drawing (see page 25) with all the necessary drill holes already provided. up to 6 m* *max. single length 5 mm by coupling Track, drilled for fixing on glass up to 6 m Order No. 8.21.405.700.99 Order No. 8.21.456.700.99 for fixing on wall bup to 6 m Order No. 8.21.406.700.99 Order No. 8.21.457.700.99 Angeled connection 180 Angeled connection 90-180 Grub screw M5 x 6 7.5 7.5 Connectors incl. frontal preparation in tracks, for tracks 180 Order No. 8.21.404.700.99 offset for tracks 90-180 Order No. 8.21.442.700.99 22 07/04
Components sliding door system suitable to variant 2 1) Countersunk single-point fixing, track to glass 2) Flange fixing track to wall ) Flange fixing track to wall, adjustable 18.5 18.5 Glassthickness 2-dimensional adjustment via oblong hole 1) Single-point fixing, track to glass, fixed, countersunk for 10 and 12 mm glass Order No. 8.29.460.700.99 Order No. 8.29.461.700.99 for 1.5-15.5 mm glass Order No. 8.29..700.99 for 17.5 mm glass Order No. 8.29.451.700.99 fixed, clamping disc for 10 and 12 mm glass Order No. 8.29.465.700.99 centring, countersunk for 10 and 12 mm glass Order No. 8.29.462.700.99 Order No. 8.29.46.700.99 for 1.5-15.5 mm glass Order No. 8.29.455.700.99 for 17.5 mm glass Order No. 8.29.456.700.99 centring, clamping disc for 10 and 12 mm glass Order No. 8.29.467.700.99 round flattened 16.5 ø42 5 60 ø55 Adjustment + 5 mm Note: min. distance glass zu wall 2 mm 0 Track rail detachment travel 2) Flange fixing track to wall Order No. 8.21.970.017.50 Order No. 8.21.970.058.50 ) Flange fixing track to wall, adjustable Order No. 8.21.412.700.99 Wall fixing for track round Order No. 8.21.441.700.99 Order No. 8.21.466.700.99 flattened Order No. 8.21.440.700.99 Order No. 8.21.465.700.99 ø80 Ceiling retainer for track carrying function Order No. 8.21.15.700.99 110 29 Recommended distance of the fixing points see page 28/29 07/04 2
MANET Sliding door system Components sliding door system suitable to variant A B C D Glassthickness 18.5 27.5 5 Components A Clip-on cover B Cylinder screw C Pin internal thread E G 60 5 D Conical sleeve E Screw bolt G Sliding track tube 55 50 Glass thickness Heightadjustment +1/-2 mm Sliding door roller without antijump mechanism only lug with roller Order No. 8.29.402.700.99 Order No. 8.29.40.700.99 ø55 198 2 piece single-point fixings for sliding door roller: countersunk f. 8-12 m glass Order No. 8.29.40.700.99 Order No. 8.29.41.700.99 clamping disk f.8-12mm glass Order No. 8.29.42.700.99 55 countersunk for 1.5-17.5 mm glass Order No. 8.29.45.700.99 countersunk f. 19 mm glass Order No. 8.29.47.700.99 m/6m Sliding track tube incl. endpiece Stock length m Order No. 8.21.527.700.99 Order No. 8.21.50.700.99 Fix length 6 m Order No. 8.21.46.700.99 Order No. 8.21.52.700.99 Curve length r = min. 600 mm Sliding track tube bent max. curve length 2.6 m Order No. 8.21.409.700.99 max. curve length 5.6 m Order No. 8.21.41.700.99 24 07/04
Components sliding door system suitable to variant 5 ø21 40 40 Connector for sliding track tube Order No. 8.29.506.700.99 round flattened 16.5 ø42 60 0 Track rail detachment travel Wall fixing for sliding track tube, round Order No. 8.21.441.700.99 Order No. 8.21.466.700.99 flattened Order No. 8.21.440.700.99 Order No. 8.21.465.700.99 18.5 Glass thickness 18.5 Glass thickness 18.5 Clamp fixing for sliding track tube to glass, single-point fixing countersunk for 10, 12 and 1.5 mm glass Order No. 8.29.171.700.99 Order No. 8.29.181.700.99 Clamp fixing for sliding track tube to glass, clamping disc single-point fixing for 10, 12 and 1.5 mm glass Order No. 8.29.172.700.99 Order No. 8.29.182.700.99 Clamp fixing for sliding track tube to wall Order No. 8.21.15.700.99 Order No. 8.21.16.700.99 5 Clamp fixing for sliding track tube to wall, 16 mm extended Order No. 8.21.157.700.99 M12 / 20 deep 44 Clamp fixing for sliding track tube fixing for double paneled sliding doors Order No. 8.21.154.700.99 26 ø80 110 Ceiling retainer for sliding track tube, carrying function Order No. 8.21.16.700.99 Recommended distance of the fixing points see page 28/29 07/04 25
MANET Sliding door system Components sliding door system (universally applicable) left hand right hand Door stop left hand Order No. 8.29.425.700.99 Order No. 8.29.427.700.99 right hand Order No. 8.29.426.700.99 Order No. 8.29.428.700.99 27.5 21.5 20 5 right hand and left hand usable Roller to glass for 8-12 mm glass, countersunk Order No. 8.29.494.700.99 for mounting onto glass Order No. 8.29.495.700.99 Door stop for roller to glass Order No. 8.29.49.700.99 Antijump mechanism for roller to glass for 8-12 mm glass, countersunk Order No. 8.29.497.700.99 for mounting onto glass Order No. 8.29.498.700.99 Door steady plastics, for mounting into floor guide, to prevent glass edges of double sliding doors bumping into each other Order No. 8.21.970.005.40 26 07/04
Components sliding door system (universally applicable) 15.5 for 8 mm glass 1.5 for 10 mm glass 11.5 for 12 mm glass Aluminium brush profile similar satin stainless steel for 8 mm glass stock length m Order No. 8.07.402.11.99 fix length up to 6 m Order No. 8.07.40.11.99 for 10 and 12 mm glass stock length m Order No. 8.07.400.11.99 fix length up to 6 m Order No. 8.07.401.11.99 7.5 ø8 1.5 ø48 75 Sliding door lock with ratchet brace for 8/10/12 mm glass Order No. 8.21.447.700.99 Order No. 8.21.446.700.99 15 24 0 Guide rail with brush seals applicable for 8/10/12 mm glass aluminium mill finished fix length 6 m Order No. 8.21.41.100.99 stock length m Order No. 8.21.42.100.99 0 Floor guide clamping disc, applicable for 8/10/12/1.5 mm glass Order No. 8.07.26.000.99 50 2 7 07/04 27
MANET Sliding door system Supply and installation of the track rail The track rail for the sliding door is prefabricated per the customer s drawing and supplied complete with the glass and/or wall fixings required for the specific application. (Fasteners for wall fixings to be supplied by others.) Where the door is to be fitted to glass walls/partitions, it is of critical importance for accurate fabrication that the fixing points provided coincide with the drill holes (bores) in the glass. The length tolerances must not exceed ± 0. mm. Caution! Ensure that the stops/single-point fixings are positioned at locations appropriate to the width of the door. Wall/single-point fixing clearance when using the wall connector (depends on stopper position). For rail support intervals on the glass wall or masonry, see fixing point interval recommendations per the table on the next page. Required dimensions for the track production (here shown for variant 2) G = Fixing point to glass W = Fixing point to wall K = Connection WK = Angle-connection G G W W see table 50 100 see table Track length G K G G K* G G see table max. 0 with connector 100 100 see table max. 0 with connector min. 80 * Note! Ensure that track joints and glass joints do not coincide 7.5 G 18.5 G G G min. 80 7.5 WK see table see table see table max. 0 with angle-connector 18.5 28 07/04
Recommended distance of the track fixing points Sliding door Variant 1 Sliding track tube see table Door width in mm Door height in mm 700 800 900 1000 1100 1200 100 1400 Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 1900 2000 2100 2200 200 2400 2 610 600 580 560 550 540 50 570 550 540 510 490 50 510 490 480 470 460 610 600 580 570 550 540 50 570 550 540 50 510 490 540 510 480 470 460 610 590 580 570 550 540 50 570 550 540 50 510 490 50 510 490 480 470 460 610 590 580 560 550 540 50 560 550 540 510 490 50 490 480 470 460 600 590 570 560 550 50 560 540 50 510 490 50 510 490 480 470 460 600 580 570 550 540 50 550 540 50 510 490 480 510 480 470 460 590 570 560 550 540 50 550 50 510 490 480 510 490 480 470 460 580 570 560 540 50 510 540 50 490 480 470 510 490 470 460 - - Sliding door Variant 2 Track compact see table Door width in mm Door height in mm 700 800 900 1000 1100 1200 100 1400 Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 1900 2000 2100 2200 200 2400 2 770 750 70 710 690 680 660 710 700 680 660 640 60 610 670 650 640 620 610 590 580 770 750 70 710 700 680 670 720 700 680 660 650 60 620 670 660 640 620 610 590 580 770 750 70 710 700 680 670 710 690 680 660 650 60 620 670 650 640 620 610 590 580 760 740 70 710 690 680 660 710 690 670 660 640 60 620 670 650 60 620 600 590 580 760 740 720 700 690 670 660 700 680 670 650 640 620 610 660 640 60 610 600 590 580 750 70 710 700 680 670 650 700 680 660 650 60 620 610 650 640 620 610 600 580 570 740 720 710 690 680 660 650 690 670 660 640 60 610 600 650 60 620 600 590 580 570 70 720 700 680 670 660 640 680 660 650 60 620 610 600 640 60 610 600 580 - - Sliding door Variant Sliding track tube see table Door width in mm Door height in mm 700 800 900 1000 1100 1200 100 1400 Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm Glass thickn.mm 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 8 10 12 1900 2000 2100 2200 200 2400 2 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 490 490 480 470 460 550 550 550 550 550 50 550 540 50 510 490 50 510 490 480 470 460 600 580 570 550 540 50 550 540 50 510 490 480 510 480 470 460 590 570 560 550 540 50 550 50 510 490 480 510 490 480 470 460 580 570 560 540 50 510 540 50 490 480 470 510 490 470 460 - - 07/04 29
MANET Sliding door system Glass preparation sliding door system For details see next page Countersunk holes for countersunk single-point fixings Cylindrical bore for clamping disc single-point fixings - 0.2 ø26 ø2+0.2 90 ø26 Glass thickness Glass thickness 0 07/04
Glass preparation sliding door system Sliding door Variant 1 27.5 2 50 50 50 55 60 5 40 14 Sliding door Variant 2 27.5 18.5 50 50 50 55 5 60 5 14 18.5 Sliding door Variant 27.5 50 50 50 5 60 55 2 5 29 40 40 14 07/04 1
MANET Pull handle/ knob system Handle bars and door knobs The pull handle/knob system is designed for glass of 8, 10 and 12 mm thick. The pull handles can be fixed to both sliding and pivoting (swing) doors on one face using the appropriate connectors or on both faces by through-bolting (back-to-back arrangement). The singlepoint fixings and through bolts are included as standard equipment in the scope of supply. The pull handles can be fitted horizontally, vertically or in a handrail arrangement. Handle bars with single-point fixings countersunk for 8/10/12 mm glass Handle bar 50 mm with 2 fixings Order No. 8.29.268.700.99 Order No. 8.29.269.700.99 Handle bar 720 mm with 2 fixings Order No. 8.29.271.700.99 Order No. 8.29.272.700.99 Complete with single-point fixings 1240 1760 Handle bar 1240 mm with fixings Order No. 8.29.274.700.99 Order No. 8.29.275.700.99 Handle bar 1760 mm with 4 fixings Order No. 8.29.277.700.99 Order No. 8.29.278.700.99 150 50 720 Handle bars with clamping disc single-point fixings for 8/10/12 mm glass Single-point fixing countersunk With clamping disc Handle bar 50 mm with 2 fixings Order No. 8.21.240.700.99 Order No. 8.21.280.700.99 Glassthickness Handle bar 720 mm with 2 fixings Order No. 8.21.241.700.99 Order No. 8.21.281.700.99 ø2 ø16 45.5 Handle bar 1240 mm with fixings Order No. 8.21.242.700.99 Order No. 8.21.282.700.99 Handle bar 1760 mm with 4 fixings Order No. 8.21.24.700.99 Order No. 8.21.28.700.99 2 07/04
Handle bars and door knobs Complete with connecting bolt Pair of handle bars inkl. connecting bolt for 8/10/12 mm glass 720 1240 1760 Pair of handle bars 50 mm with 2 fixings Order No. 8.21.267.700.99 Order No. 8.21.247.700.99 150 50 Pair of handle bars 720 mm with 2 fixings Order No. 8.21.270.700.99 Order No. 8.21.250.700.99 ø16 45 70 Pair of handle bars 1240 mm with fixings Order No. 8.21.27.700.99 Order No. 8.21.25.700.99 Pair of handle bars 1760 mm with 4 fixings Order No. 8.21.276.700.99 Order No. 8.21.256.700.99 Door knob one side fixing for 8/10/12 mm glass Single-point fixing countersunk With clamping disc Door knob with single-point fixing countersunk Order No. 8.21.422.700.99 ø 2 51 Door knob with clamping disc single-point fixings Order No. 8.21.426.700.99 51 51 Door knob back-to-back for 8/10/12 mm glass Order No. 8.21.42.700.99 ø 50 Glassthickness Glassthickness Glassthickness Glassthickness Recessed pull grip for 8/10/12 mm glass Order No. 8.21.290.700.99 20 07/04
MANET Pull handle/ knob system Glass preparation handle bars and pull handle Glass preparation handle bars/ pair of handle bars and knobs from page 2/ min. approx. 65 Countersunk bore on handle bar and door knob, one side fixing - 0.2 min. approx. 65 150 mm ±0. mm ±0. 1040 mm ±0. 1560 mm ±0. ø26 ø2+0.2 Cylindrical bore on pair of handle bar and door knobs, back-to-back 90 Glass thickness Recessed pull grip ø22 ø8 at length of handle bars 50 mm Glassthickness Glassthickness Glassthickness ARCOS Pull handle Grub screw 85 ~ 65 ARCOS Pull handle for 8/10/12 mm glass incl. connecting bolt only in material 1.4404 Bushing Connecting bolt 750/50 mm drill hole centres 98/824 mm Handle 50 mm with 2 fixings Order No. 8.26..700.99 Handle 750 mm with 2 fixings Order No. 8.26.510.700.99 Cylindrical bore ø16 80 ø16 Glass thickness 4 07/04
Installation tools/ accessories Clip-on cover for single-point fixing with spring, 5 pieces Order No. 8.29.217.700.99 Assembling tool for MANET-single-point fixing (can also be used as attachment for torque wrench) Order No. 8.21.14.000.99 Sickle spanner Order No. 8.21.18.000.99 Drilling gauge Order No. 8.21.17.000.99 Sample cases Order No. 8.21.995.000.99 07/04 5
MANET COMPACT sets MANET COMPACT sets The aesthetic elegance of the MANET COMPACT concept is also available in the form of standardised sets for simple, fast planning of the more popular system types with 8, 10 or 12 mm toughened safety glass (TSG). Optional accessories enable the individual sets to be semi-customised. The system components offer numerous adjustment possibilities in order to ensure problem-free installation of whichever door type sliding or swing, single action or double action is required. Wall abutment profiles may need to be provided (by others) for fixing fan lights and side screens. Pivot doors set 1 page 7 Construction 1 (1 set) Construction 2 (1 set) Construction (1 set) Construction 4 (1 set) Construction 5 (2 sets) Construction 6 (2 sets) Construction 7 (2 sets) Construction 8 (2 sets) Pivot doors set 2 page 8 Pivot doors set 2 + page 8/9 Construction 9 (1 set) Construction 12 (1 set) Construction 18 (2 sets) Pivot doors set page 9 Construction 21 (every 1 set) Construction 1 (1 set) Construction 15 (1 set) Construction 2 (2 sets) Sliding doors Set 4/5/6 page 40-45 Construction set 4.1/4.2 Construction set 5.1/5.2 Construction set 6.1/6.2 6 07/04
S8 S8 Set 1 Pivot door MANET COMPACT without overpanel for 10-12 mm glass Set 1 consisting of: Pivot pole pair top/bottom, short type, Order No. 8.29.910.700.99 including: 4 Single-point fixing for pivot pole, 1 Pivot fitting top, 1 Eccentric bushing f. pivot bearing top, 1 Pivot fitting bottom for DORMA BTS/floor pivot Set 1 with pivot pole pair short type Option: Set 1, but with additional intermediate tube for pivot pole pair in fix length Please mention absolutely: Panel height mm 577 mm = Length intermed. tube mm Ceiling Order No. 8.29.911.700.99 Air 150 11 Options for SET 1 Air to sidelight 5 to wall 8 7 Air 65 Door weight 80 kg Door height 2 mm Door width 1200 mm 65 150 11 DORMA BTS For the requisite glass preparation please see 16/17 Handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Pair of handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Stop for pivot door with ceiling mounting Ceiling fixing (bearing function) Corner lock top/bottom Corner lock top/bottom with rose on one lockside Profile cylinder for corner lock 8.14.400/405.700.99 Eccentric bushing for corner lock 8.14.400/405.700.99 Floor pivot Assembling tool for MANET-single-point f. Sickle spanner 5 pcs. clip-on cover f. single-point fixings with spring Sample cases MANET COMPACT for advice and presentation Order No. 8.29.268.700.99 Order No. 8.29.271.700.99 Order No. 8.29.274.700.99 Order No. 8.29.277.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Order No. 8.21.4.700.99 Order No. 8.29.7.700.99 Order No. 8.14.400.700.99 Order No. 8.14.405.700.99 Order No. 8.14.206.000.99 Order No. 8.05.194.000.99 Order No. 8.01.106.700.99 Order No. 8.21.14.000.99 Order No. 8.21.18.000.99 Order No. 8.29.217.700.99 Order No. 8.21.994.700.99 07/04 7
MANET COMPACT sets Set 2 Pivot door MANET COMPACT with overpanel for 10-12 mm glass Set 2 consisting of: Pivot pole pair top/bottom, short type, Order No. 8.29.912.700.99 Set 2 with pivot pole pair short type including: 4 Single-point fixing for pivot pole, 1 Pivot fitting top, 1 Pivot bearing location for overpanel 1 Pivot fitting bottom for DORMA BTS/floor pivot Option: Set 2, but with additional intermediate tube for pivot pole pair in fix length Please mention absolutely: Overpanel Panel height mm 577 mm = Length intermed. tube mm Order No. 8.29.91.700.99 Air 7 Air Wall 150 11 65 Door weight 80 kg Door height 2 mm Door width 1200 mm Air to wall 8 65 150 11 DORMA BTS For the requisite glass preparation please see page 16/17 Options for SET 2 Handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Pair of handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Stop for pivot door with ceiling mounting Ceiling fixing (bearing function) Stop at overpanel, (inside/outside) for 10 and 12 mm glass Corner lock top/bottom Corner lock top/bottom with rose on one lockside Profile cylinder for corner lock 8.14.400/405.700.99 Eccentric bushing for corner lock 8.14.400/405.700.99 Overpanel-sidel. conn. for 10/12 mm glass Overp.-sidel. conn. with stop inside for 10 and 12 mm glass Overp.-sidel. conn. with stop outside for 10 mm glass for 12 mm glass Floor pivot Assembling tool for MANET-single-point f. Sickle spanner 5 pcs. clip-on cover f. single-point fixings with spring Sample cases MANET COMPACT for advice and presentation Order No. 8.29.268.700.99 Order No. 8.29.271.700.99 Order No. 8.29.274.700.99 Order No. 8.29.277.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Order No. 8.21.4.700.99 Order No. 8.29.7.700.99 Order No. 8.29.5.700.99 Order No. 8.14.400.700.99 Order No. 8.14.405.700.99 Order No. 8.14.206.000.99 Order No. 8.05.194.000.99 Order No. 8.29.20.700.99 Order No. 8.29.22.700.99 Order No. 8.29.24.700.99 Order No. 8.29.25.700.99 Order No. 8.01.106.700.99 Order No. 8.21.14.000.99 Order No. 8.21.18.000.99 Order No. 8.29.217.700.99 Order No. 8.21.994.700.99 8 07/04
Set Pivot door MANET COMPACT with overpanel and sidelight for 10-12 mm glass Set with pivot pole pair, short type Air Set consisting of: Pivot pole pair top/bottom, short type, including: 4 Single-point fixing for pivot poles, 1 Pivot fitting top, 1 Overpanel-sidelight connector with pivot bearing location, 1 Pivot fitting bottom for DORMA BTS/floor pivot Option: Set, but with additional intermediate tube for pivot pole pair in fix length Please mention absolutely: Panel height mm 577 mm = Length intermed. tube Overpanel mm Order No. 8.29.914.700.99 Order No. 8.29.915.700.99 Air 7 Air Sidelight 150 11 65 Door weight 80 kg Door height 2 mm Door width 1200 mm Air to wall 8 150 11 65 DORMA BTS For the requisite glass preparation please see page 16/17 Options for SET 2 Handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Pair of handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Stop for pivot door with ceiling mounting Ceiling fixing (bearing function) Stop at overpanel, (inside/outside) for 10 and 12 mm glass Corner lock top/bottom Corner lock top/bottom with rose on one lockside Profile cylinder for corner lock 8.14.400/405.700.99 Eccentric bushing for corner lock 8.14.400/405.700.99 Overpanel-sidel. conn. for 10/12 mm glass Overpanel-sidel. conn. with stop inside for 10 and 12 mm glass Overpanel-sidel. conn. with stop outside for 10 mm glass for 12 mm glass Floor pivot Assembling tool for MANET-single-point f. Sickle spanner 5 pcs. clip-on cover f. single-point fixings with spring Sample cases MANET COMPACT for advice and presentation Order No. 8.29.268.700.99 Order No. 8.29.271.700.99 Order No. 8.29.274.700.99 Order No. 8.29.277.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Order No. 8.21.4.700.99 Order No. 8.29.7.700.99 Order No. 8.29.5.700.99 Order No. 8.14.400.700.99 Order No. 8.14.405.700.99 Order No. 8.14.206.000.99 Order No. 8.05.194.000.99 Order No. 8.29.20.700.99 Order No. 8.29.22.700.99 Order No. 8.29.24.700.99 Order No. 8.29.25.700.99 Order No. 8.01.106.700.99 Order No. 8.21.14.000.99 Order No. 8.21.18.000.99 Order No. 8.29.217.700.99 Order No. 8.21.994.700.99 07/04 9
MANET COMPACT sets Set 4.1 / 4.2 Sliding door MANET COMPACT for installation to wall, for 8-12 mm glass Set 4.1 with single-point fixings countersunk Set 4.2 with clamping disc single-point fixings Fix length: LL = 4 * X + 286 mm X X X X 14 60 14 14 85 Door height max. 2 mm Note: Door weight max. 100 kg LM = Daylight opening 880-1280 mm TB = Door width 960-160 mm DGB = Entry width LM - 10 mm LL = Sliding track tube length X = Distance of single-point fixings (LM 148) * 1/2 40 40 DGB LM TB = LM + 80 mm For the requisite glass preparation please see page 0/1 40 07/04
Set 4.1 / 4.2 Sliding door MANET COMPACT for installation to wall, for 8-12 mm glass Set 4.1 / Set 4.2 consisting of sliding track tube with end plugs in fix length (please indicate length when ordering, for calculation see page 28/29) including: 5 Clamp fixing for track to wall 2 Sliding door roller incl. single-point fixing for 8-12 mm glass 1 Door stop left hand 1 Door stop right hand 1 Floor guide AGILE Installation tools Set as above, but with 16 mm extended clamp fixing Set 4.1 with single-point fixings countersunk Order No. 8.29.916.700.99 Order No. 8.29.925.700.99 Set 4.2 with clamping disc single-point fixings Order No. 8.29.917.700.99 Order No. 8.29.926.700.99 Options for Set 4.1 / Set 4.2 Handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Pair of handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Order No. 8.29.268.700.99 Order No. 8.29.271.700.99 Order No. 8.29.274.700.99 Order No. 8.29.277.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Order No. 8.21.240.700.99 Order No. 8.21.241.700.99 Order No. 8.21.242.700.99 Order No. 8.21.24.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Door knob back-to-back for 8-12 mm glass Door knob one side fixing for 8-12 mm glass Corner lock top/bottom Corner lock top/bottom with rose on one lockside Profile cylinder for corner lock 8.14.400/405.700.99 Eccentric bushing for corner lock 8.14.400/405.700.99 Aluminium guide rail Length 000 mm Assembling tool for MANET-single-point fixing Sickle spanner 5 pcs. clip-on cover f. single-point fixings with spring Sample cases MANET COMPACT for advice and presentation Order No. 8.21.42.700.99 Order No. 8.29.422.700.99 Order No. 8.14.400.700.99 Order No. 8.14.405.700.99 Order No. 8.14.206.000.99 Order No. 8.05.194.000.99 Order No. 8.21.42.700.99 Order No. 8.21.14.000.99 Order No. 8.21.18.000.99 Order No. 8.29.217.700.99 Order No. 8.21.994.700.99 07/04 41
MANET COMPACT sets Set 5.1 / 5.2 Sliding door MANET COMPACT for installation to glass, one side attached to masonry, for 8-12 mm glass Set 5.1 with single-point fixings countersunk Set 5.2 with clamping disc single-point fixing Loop mm OB = LM mm SB min. = LM 60 mm 0 Fix length: LL = 2 * X+2 * Y + 60 mm 50 Overpanel 50 Sidelight X X Y Y 14 60 14 14 70 Sliding door Door height max. 2 mm Note: Door weight max. 100 kg LM = Daylight opening 700-120 mm TB = Door width 740-160 mm DGB = Entry width 600-1220 mm SBmin. = min. Side panel width LL = Sliding track tube length X = Centre distance between single-point fixings overlight (OB - 19) * 1/2 Y = Centre distance between single-point fixings sidelight Y = X 29 OB = Overpanel width 40 DGB = LM 100 mm LM TB = LM + 40 mm For the requisite glass preparation please see page 0/1 42 07/04
Set 5.1 / 5.2 Sliding door MANET COMPACT for installation to glass, one side attached to masonry, for 8-12 mm Set 5.1 / Set 5.2 consisting of sliding track tube with end plugs in fix length (please indicate length when ordering, for calculation see page 28/29) including: 6 Clamp fixing fixing to glass, countersunk 2 Sliding door roller incl. single-point fixing for 8-12 mm glass 1 Wall fixing flattened 1 Door stop left hand 1 Door stop right hand 1 Floor guide AGILE Installation tools Set 5.1 with single-point fixings countersunk Order No. 8.29.918.700.99 Set 5.2 with clamping disc single-point fixings Order No. 8.29.919.700.99 Options for Set 5.1 / Set 5.2 Handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Pair of handle bars Length 50 mm Length 720 mm Length 1240 mm Length 1760 mm Order No. 8.29.268.700.99 Order No. 8.29.271.700.99 Order No. 8.29.274.700.99 Order No. 8.29.277.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Order No. 8.21.240.700.99 Order No. 8.21.241.700.99 Order No. 8.21.242.700.99 Order No. 8.21.24.700.99 Order No. 8.21.267.700.99 Order No. 8.21.270.700.99 Order No. 8.21.27.700.99 Order No. 8.21.276.700.99 Door knob back-to-back for 8-12 mm glass Door knob one side fixing for 8-12 mm glass Corner lock top/bottom Corner lock top/bottom with rose on one lockside Profile cylinder for corner lock 8.14.400/405.700.99 Eccentric bushing for corner lock 8.14.400/405.700.99 Aluminium guide rail Length 000 mm Ceiling connector (bearing function) Assembling tool for MANET-single-point fixing Sickle spanner 5 pcs. clip-on cover f. single-point fixings with spring Sample cases MANET COMPACT for advice and presentation Order No. 8.21.42.700.99 Order No. 8.29.422.700.99 Order No. 8.14.400.700.99 Order No. 8.14.405.700.99 Order No. 8.14.206.000.99 Order No. 8.05.194.000.99 Order No. 8.21.42.700.99 Order No. 8.29.7.700.99 Order No. 8.21.14.000.99 Order No. 8.21.18.000.99 Order No. 8.29.217.700.99 Order No. 8.21.994.700.99 07/04 4
MANET COMPACT sets Set 6.1 / 6.2 Sliding door MANET COMPACT for installation to glass, sidelight back-to-back, for 8-12 mm glass Set 6.1 with single-point fixings countersunk Set 6.2 with clamping disc single-point fixings Loop mm Loop mm OB = LM 6 mm SB min. = LM 20 mm Fix length: LL = 2 * X+2 * Y + 460 mm 50 Sidelight 50 Overpanel 50 Sidelight X X Y Y 14 60 14 14 70 Sliding door Door height max. 2 mm Note: Door weight max. 100 kg LM = Daylight opening 700-120 mm TB = Door width 740-160 mm DGB = Entry width 600-1220 mm OB = Overpanel width SBmin.= min. Sidelight width LL = Sliding track tube length X = Centre distance between single-point fixings overpanel (OB - 150) * 1/2 Y = Centre distance between single-point fixings sidelight Y = X 29 40 40 DGB = LM 100 mm LM TB = LM + 80 mm For the requisite glass preparation please see page 0/1 44 07/04