MAC OSX INSTALLATION NOTES ORACLE VIRTUALBOX Micro Planner X-Pert V3.5.1 Digital Download Edition THIS DOCUMENT CONTAINS IMPORTANT INFORMATION REGARDING THE INSTALLATION AND USE OF THIS SOFTWARE. IF AFTER READING THIS DOCUMENT, YOU HAVE REMAINING QUESTIONS, PLEASE CONTACT INSTALLATION SUPPORT AT: Installation Support Email: installations@microplanning.com Micro Planning International Asia Pacific Pty Ltd ABN 41 126 858 553 This document is Copyright 2012 Micro Planning International Asia Pacific Pty Ltd ABN 41 126 858 553 All rights reserved Software Installation This digital download edition of Micro Planner X-Pert V3.5.1 has been tested for compatibility with the following 32-bit platforms: Windows XP (All editions, except 64-bit) Windows 7 (32-bit editions only) Windows Server 2003 32-bit Windows Server 2008 32-bit In addition, we have produced a set of installation notes that should allow you to run Micro Planner X-Pert V3.5.1 on a Mac OSX machine, through a virtualization solution such as Parallels Desktop 7 (commercial), VMware Fusion 4 (commercial), or Oracle VirtualBox 4 (free and open source). In this document, we run you through the steps required to install Windows 7 32-bit under Oracle VirtualBox 4. After doing so, you will be able to follow the standard Windows installation instructions from within the virtual machine that you create.
Oracle VirtualBox - Detailed Installation Steps The following detailed steps will assist you with the installation of Windows 7 32-bit as a virtual machine under Oracle VirtualBox 4, running under Mac OSX Lion 10.7. STEP 1. Open your web browser and navigate to: http://www.virtualbox.org/wiki/downloads Select the download for VirtualBox 4.1.10 for OS X hosts, as shown below. STEP 2. Open the Oracle VirtualBox DMG that you downloaded from your Downloads folder. When the disk image opens, double-click the VirtualBox.mpkg icon to install, as shown below.
STEP 3. You will be presented with the Oracle VirtualBox 4 installation wizard, as shown below. Follow the prompts as instructed to install Oracle VirtualBox 4. STEP 4. At the end of installation, you should see the following screen, confirming successful installation. Click Close to dismiss the window.
STEP 5. Launch Oracle VirtualBox 4 from Launchpad or your Applications menu. You will be presented with the Oracle VM VirtualBox Manager window, as shown below. Click the New icon, located top-left, to create a new Virtual Machine. STEP 6. When prompted, give your new Virtual Machine a name, e.g. Windows 7 32-bit, check that the OS Type and Version fields display Microsoft Windows and Windows 7 respectively, as shown below. and click Continue. You may continue to click Continue using the defaults provided.
STEP 7. Once you have clicked through the Create New Virtual Machine wizard, you will be presented with a summary of the installation options you have chosen, as shown below. Check that your settings match those in the image, and then click Create. STEP 8. Windows 7 will now be present in the Oracle VM VirtualBox Manager window, as shown below. Click Start, located top-left, to begin the installation process.
STEP 9. Oracle VirtualBox 4 will present you with the First Run Wizard, as shown below. You may Click Continue. STEP 10. When you are prompted to select a DVD drive, as shown below, you should select Host Drive and insert your Windows 7 32-bit Installation Disc. Please ensure you insert the proper disc, as only a 32-bit Windows virtual installation will support running Micro Planner X-Pert V3.5.1. With your Windows 7 32-bit installation disc in your host machine s DVD drive, click Next to continue
STEP 11. When prompted as shown below, you may click Start. STEP 12. The Windows Installation will now proceed, as shown below. Follow the prompts to install Windows 7 32-bit into your Virtual Machine.
STEP 13. Once the installation of the Windows 7 32-bit Virtual Machine is fully complete, you should be presented with a view similar to that shown below. Note how Windows 7 32-bit is shown as an Oracle VirtualBox 4 window within your Mac OSX desktop. STEP 14. From within the Oracle VirtualBox 4 window, Hold the Host key (Left Command by default), and press D simultaneously. This will begin the Installation of Guest Additions on the Windows 7 desktop. When prompted with the Autoplay dialog, select Run VBoxWindowsAdditions.exe, as shown below.
STEP 16. The Oracle VirtualBox 4 Guest Additions installer will load, as shown below. Proceed through the installation by clicking Next. You may safely accept the default settings. STEP 17. During installation, you may be prompted as shown below. It is safe to select Always trust software from Oracle Corporation and then Click Install.
STEP 18. Following successful installation of Oracle VirtualBox 4 Guest Additions, you will be prompted to restart the Virtual Machine (running Windows 7 32-bit), as shown below. You may safely do so. Your Host system (running Mac OSX) will not be restarted. STEP 19. Following the restart of the Virtual Machine, you will be presented with the Windows 7 desktop again. From the lower-right menu bar in the Oracle VirtualBox window, click on the Folder Icon, and then select Shared Folders from the context menu, as shown below.
STEP 20. You will be presented with the Virtual Machine Settings screen. Select the Shared Folders tab from the list along the top. Then click the Folder with + icon on the far right side of the screen, as shown below. STEP 21. You will be presented with the Add Share window, as shown below. Enter the path or browse to the folder where you have located the Micro Planner X-Pert V3.5.1 installation executable. Give this new share a name, as shown below. In this example, the username is user and the path points to that user s home folder. When you are satisfied with your selection, you may click OK.
STEP 22. The list of Shared Folders in the Virtual Machine Settings window will be updated to reflect the changes you have made. You may return to this screen at a later date to share additional folders, if necessary, using a similar process. For now, you may click OK to continue. STEP 23. Within the Oracle VirtualBox window, start Windows Explorer or, alternatively, navigate to Computer. When you are presented with Windows Explorer, select Network from the bottom of the left-hand sidebar. If you see a drop-down notification that Network discovery and File sharing are turned off, click the notification and select Turn on network discovery and file sharing, as shown below.
STEP 24. If you have selected to turn on network discovery and file sharing, you will be prompted to select an option. You may select the top option, as shown below. STEP 25. Select the address bar, and enter \\VBOXSVR as shown below. You should be presented with a list of folders that you have shared in an earlier step. Click through until you reach your shared home folder, or the respective folder you have chosen to share.
STEP 26. You should now be able to see the files that are present in your Mac OSX home folder from within the Oracle VirtualBox window. Place the installer file for Micro Planner X-Pert V3.5.1 Digital Download Edition into your Mac OSX home folder. The correct file should already be named xpert351setup.exe. If you have chosen to share your Documents folder with the Virtual Machine, you will notice that the icon also appears from within your Oracle VirtualBox window. You may need refresh the windows explorer view by clicking the refresh icon next to the address bar.
STEP 27. You should now be able to double-click and start the installation of Micro Planner X-Pert V3.5.1 from within the Oracle VirtualBox window, as shown below. The installation will now proceed as per the standard installation instructions. After installation, you may launch Micro Planner X-Pert V3.5.1 via the windows start menu, accessed from within the Oracle VirtualBox window. If you shutdown the Windows 7 32-bit virtual machine, you will need to start the Windows 7 virtual machine from within the Oracle VM VirtualBox Manager screen, before you can start Micro Planner X-Pert V3.5.1 again.
Thankyou for reading this document. If you have further questions, please contact Installation Support, by email: installations@microplanning.com We would like to congratulate you once again for choosing Micro Planner X-Pert V3.5.1 Copyright 2012 Micro Planning International Asia Pacific Pty Ltd ABN 41 126 858 553 All rights reserved Other company, product, or service names may be trademarks or service marks of others. These and/or associated processes and systems may be subject to copyright and Micro Planning International Asia Pacific Pty Ltd, cannot be held liable for any misuse of such subject to any jurisdictional specific laws applicable.