PANNELLI ECONOMICI CON FOGLIE ECONOMIC PANELS WITH LEAVES

PANNELLI ECONOMICI CON FOGLIE ECONOMIC PANELS WITH LEAVES 501/E-230R 0501/E-230R 502/E-230R 0504/E-230R 0523/E-230R 0524/E-230R 51/E-230R 52/E-230R H. 1000 x B. 190 H. 1000 x B. 20 H. 1000 x B. 5 H. 1000 x B. 20 H. 1000 x B. 20 H. 1000 x B. 20 H. 1000 x B. 20 H. 1000 x B. 20-1 -2-3 -4-5 - -7 - + x5 + x + x + x + x + x + x 1,490 2,300 1,50 1,400 2,900 2,470 2,400 2,900 PANNELLI ECONOMICI CON BOCCIOLO A FREDDO ECONOMIC PANELS WITH COLD HAND MADE ENDS 30-29R H. 1000 x B. 215-9 x 1,400 32-29R 34-29R 3-29R 39-29R 370-29R 31-29R 31/S-29R 33-29R H. 1000 x B. 215 H. 00 x B. 270-10/F -10/SF x 1,400 H. 1000 x B. 10-11 H. 1000 x B. 220 - H. 1000 x B. 220-13 x x x x 2,350 1,400 1,300 1,350 H. 1000 x B. 100-14 x 1,050 H. 1000 x B. 135-15 1x4 1,400 H. 1000 x B. 145-1 -1-1 10 1,400-2,200

PANNELLI ECONOMICI A FREDDO ECONOMIC COLD-MADE PANELS 570-29R 571-29R 572-29R 573-29R 574-29R 590-29R 591-29R 592-29R 593-29R H. 1000 x B. 230 H. 1000 x B. 150 H. 1000 x B. 150 H. 1000 x B. 170 H. 1000 x B. 190 9. 1000 x B. 102 H. 1000 x B. 102 H. 1000 x B. 142 H. 1000 x B. 142-17 -1-19 -20-21 -22-23 -24-25 + x5 + x5 + x5 + x5 + x5 + x + x + x + x 2,250 1,700 2,300 2,200 2,300 1,00 1,330 1,00 2,220 PANNELLI ECONOMICI IN PIATTO A FREDDO ECONOMIC COLD-MADE FLAT PANELS 302-22R 303-22R 304-22R 305-22R 305/S-22R 31-22R 31/S-22R 317-22R 317/S-22R 31-22R 31/S-22R H. 720 x B. 270 H. 900 x B. 400 H. 900 x B. 115 H. 710 x B. 240 H. 710 x B. 240-2 -27-2 -29/F -29/SF 1 x 4 25 x 25 x 1 x 4 1 x 4 2,500 5,00 3,000 1,00 1,700 H. 530 x B. 235-30/F H. 530 x B. 235-30/SF 1 x 4 1 x 4 1,700 1,00 H. 0 x B. 245-31/F H. 0 x B. 245-31/SF 1 x 4 1 x 4 1,700 1,00 H. 700 x B. 240-32/F H. 700 x B. 240-32/SF 1 x 4 1 x 4 1,00 1,700 333-22R 334-22R 334/S-22R 335-22R 335/S-22R 33-22R 33/S-22R 33/A-22R 353-22R H. 750 x B. 210 H. 0 x B. 20 H. 0 x B. 20 H. 700 x B. 20-33 -34/F -34/SF -35/F 25 x 3,100 1 x 4 1,400 H. 700 x B. 20-35/SF H. 40 x B. 10-3/F H. 40 x B. 10-3/SF H. 1000 x B. 20-37 H. 50 x B. 145-3 1 x 4 20 x 4 20 x 4 1 x 5 1 x 5 1,250 1,400 1,300 1,0 1,50 1,00 1,100 7

PANNELLI CON FOGLIE E RICCI A VITE PANELS WITH LEAVES AND SCREW-LIKE SCROLLS 0501-230R 0504-230R 0523-230R 0524-230R 51-230R 52-230R 57-230R H. 1000 x B. 20 H. 1000 x B. 225 H. 1000 x B. 210 H. 1000 x B. 215 H. 1000 x B. 250 H. 1000 x B. 220 H. 1000 x B. 250-4 -47-4 -49-50 -51-52 + x + x + x + x + x + x + x 2,900 2,300 1,50 1,400 2,900 2,500 1,950 52/EP-230R 52/ECP-230R 57/E-230R FORNITI CON FOGLIE E FASCETTE A PARTE LEAVES AND CLIPS SUPPLIED APART 11-230R 11/A-230R FORNITI CON FOGLIE E FASCETTE A PARTE LEAVES AND CLIPS SUPPLIED APART 11/1-230R 11/A1-230R H. 1000 x B. 20 H. 1000 x B. 20 H. 1000 x B. 20 H. 0 x B. 500 H. 1000 x B. 500 H. 0 x B. 500 H. 0 x B. 500-53 -54 - -5/S -5/D -5/S -5/D + x + x + x 9-17 9-17 9-17 9-17 2,470 1,950 1,950,000,000 4,00 4,00 ARTICOLO A NORMA (non passa la sfera Ø 100) ARTICLE THAT MEETS THE CODE (a Ø 100 diameter ball does not pass through) 23-231R 23/A-231R 24-231R 24/A-231R 24/AED-231R 24/AE-231R NUOVO -0-1/S NUOVO -0-1/D NUOVO -2-1/S NUOVO -2-1/D NUOVO 2-427/S NUOVO 2-427/D NUOVO 2-427/S NUOVO 2-427/D H. 770 x B. 270 H. 770 x B. 270 H. 50 x B. 330-0/S -0/D -2/S 9-17 3,000 H. 50 x B. 330-2/D 9-17 9-17 9-17 3,000 3,900 3,900 H. 0 x B. 350-4 x 3,200 H. 0 x B. 350-5 x 2,100

PANNELLI FORGIATI CON RICCI E FOGLIE BAROCCHE FORGED PANELS WITH SCROLLS AND BAROQUE STYLE LEAVES 5-570/001-231R 5-570/002-231R 5-570/003-231R 5-570/004-231R 5-570/005-231R 5-570/00-231R H. 00 x B. 270 -/S 1 x 3,020 H. 00 x B. 270 -/D 1 x 3,020 H. 740 x B. 315 -/S 1 x 4,130 H. 740 x B. 315 -/D 1 x 4,130 H. 15 x B. 350-70/S 1 x 4,490 H. 15 x B. 350-70/D 1 x 4,490 5-571/001-231R 5-571/002-231R 5-571/003-231R 5-571/004-231R 5-52/007-231R 5-52/00-231R H. 735 x B. 310-72/S Ø 3,400 H. 735 x B. 310-72/D Ø 3,400 H. 20 x B. 350-74/S Ø 3,70 H. 20 x B. 350-74/D Ø 3,70 PANNELLI CON FOGLIE E RICCI CON BOCCIOLO A SIGARETTA PANELS WITH LEAVES AND SCREW-LIKE SCROLLS 02-27R 47-294R 47/A-294R 2-294R H. 590 x B. 230-7/S Ø 2,200 H. 590 x B. 230-7/D Ø 2,200 1710-294R 1711-294R H. 710 x B. 70-7 1x su 9-17 7,200 2/A-294R mm 400 2/B-294R mm 300 1-39 mm 450 mm 350 H. 450 x B. 400-7-1 1 x su 9-17 H. 00 x B. 5 H. 00 x B. 5 NUOVO -1/S -2/S 1x 25x10-1/D -2/D 1x 25x10 H. 350 x B. 300 su 9-17 su 9-17 -7-2 1 x su 9-17 0,750 0,750 H. 1000 x B. 195-3 14+ 14 x 2,00 H. 1000 x B. 200-4 1 x 10+ 1 x 3,500 9

PANNELLI CON FOGLIE E ROSE FORGIATE PANELS WITH FORGED LEAVES AND ROSES PANNELLI CON FOGLIE, ROSE E GRAPPOLI D UVA PANELS WITH LEAVES AND GRAPES 5-539/001-279R 5-539/002-279R 1707-297R 170-297R 1709-297R 5-530/011-23R 5-530/00-23R 5-530/007-23R Ø 14 15 H. 40 x B. 10 H. 40 x B. 10 -/S -/D Ø 10 0,90 Ø 10 0,90 5-539/003-279R 5-539/004-279R H. 570 x B. 220-94/S Ø 3,150 5-530/010-23R 570 H. 1000 x B. 230 H. 1000 x B. 230 H. 1000 x B. 170-5 - -7 Ø 14 + Ø 10 Ø 14 + Ø 10 + x 2,500 2,500 2,000 H. 00 x B. 400 H. 00 x B. 400-90/S -90/D Ø 10 1,70 Ø 10 1,70 H. 990 x B. 220-92/S Ø 14 5,700 H. 990 x B. 220-92/D Ø 14 5,700 H. 570 x B. 220-94/D Ø 3,150 5-530/014-23R 5-530/015-23R 5-530/017-23R 5-530/020-23R 5-530/0-23R 150 5-530/01-23R 20 00 140 5-530/021-23R 00 H. 00 x B. 200-9/S Ø 3,250 40 5-530/019-23R H. 00 x B. 290-104/S Ø 10 3,000 5-530/01-23R 5-530/013-23R 00 H. 1000 x B. 220 H. 1000 x B. 220-9/S -9/D Ø 14 - Ø Ø 14 - Ø 5,900 5,900 70 H. 00 x B. 200-9/D Ø 3,250 H. 1000 x B. 20-100 Ø 14 - Ø,250 H. 40 x B. 20-101 Ø 10 3,400 H. 50 x B. 200-102 Ø 10 3,300 H. 1000 x B. 200-103 Ø 14 - Ø 10 5,950 H. 00 x B. 290-104/D Ø 10 3,000

PANNELLI FORGIATI IN STILE BAROCCO BAROQUE STYLE FORGED PANELS 1150 0 935 70-302R 71-302R 72-302R 1150 0 935 H. 935 x B. 935-170 1x su 9-17 27,000 PANNELLI CON FOGLIE RICAVATE DALL ASTA PANELS WITH LEAVES MADE FROM ONE PIECE H. 1150 x B. 1150-171 1x su 9-17 35,000 00 H. 0 x B. 0-172 1x su 9-17 17,000 790 100/P-213R 100/S-213R 50 770 H. 50 x B. 790-173 25x su 9-17 20,000 PANNELLI CON RICCI FORGIATI A BOCCIOLO PANELS WITH HAND MADE ENDING FORGED SCROLLS 101/P-213R 35 40 H. 770 x B. 00-174 25x su 9-17 20,000 101/S-213R 70 770 H. 70 x B. 35-175 1 x 10 20,000 H. 770 x B. 40-17 1 x 10 20,000 71

PANNELLI CON RICCI FORGIATI A BOCCIOLO PER POGGIOLI E SCALE PANELS WITH HAND-MADE ENDING FORGED SCROLLS, FOR BALCONY AND STAIRS 5-45/001-322R 50 5-45/002-322R 700 5-45/003-322R 400 5-45/004-322R 200 910 910 910 910 H. 910 x B. 50-177 1x10 32,000 H. 910 x B. 700-17 1x10 1,000 H. 910 x B. 400-179 1x10 11,000 H. 910 x B. 200-10 1x10 7,000 5-45/001.S-322AR 1350 00 5-45/002.S-322AR 400 5-45/003.S-322AR 220 5-45/004.S-322AR 20 20 20 20 1 x 10 5-45/010 100 H. 20 x B. 1350-11 ALCUNE AMBIENTAZIONI SETTING EXAMPLES H. 20 x B. 700-1 x 10 5-45/005-322R H. 20 x B. 350-13 1 x 10 H. 20 x B. 320-14 1 x 10 30 H. 30 x B. 100-15 1 x 10 0,700-1 5-322/C4-322CR 5-322/C2-322CR - -17-15 -17-13 -15-179 -190 5-322/C1-322CR 5-322/C3-322CR -11-15 -177-19 -1-14 -15-10 72

PANNELLI CON RICCI FORGIATI A BOCCIOLO PER POGGIOLI E SCALE PANELS WITH HAND-MADE ENDING FORGED SCROLLS, FOR BALCONY AND STAIRS 5-45/00-322R 5-45/007-322R 50 00 5-45/00-322R 300 5-45/009-322R 150 50 50 50 50 H. 50 x B. 50-191 1x10 27,500 H. 50 x B. 00-192 1x10,500 H. 50 x B. 300-193 1x10 11,000 H. 50 x B. 150-194 1x10 4,000 1150 5-45/007.S-322BR 70 5-45/00.S-322BR 320 5-45/009.S-322BR 5-45/00.S-322BR 150 77 770 770 770 H. 77 x B. 1000 H. 770 x B. 00-195 -19 1 x 10 5-45/010 ALCUNE AMBIENTAZIONI 100 SETTING EXAMPLES 5-45/011-322R 1 x 10 H. 770 x B. 320-197 1 x 10 H. 770 x B. 150-19 1 x 10 30 H. 30 x B. 100-15 1 x 10 0,700-199 5-322/D4-322DR 5-322/D2-322DR -195-15 -191-200 -197-15 -193-201 5-322/D1-322DR 5-322/D3-322DR -19-15 -192-194 -202-203 -19 73

PANNELLI CON RICCI FORGIATI A BOCCIOLO PER POGGIOLI E SCALE IN STILE 700 FRANCESE PANELS WITH HAND-MADE ENDING FORGED SCROLLS, FOR BALCONY AND STAIRS, XIIX CENTURY FRENCH STYLE 9-324/001.P-324R 100 9-324/001.S-324R 100 900 H. 900 x B. 100-204 1 x 20 9-325/001.P-325R 00 1 x 9-325/001.S-325R H. 20 x B. 100-205 00 900 20 H. 900 x B. 00-20 1 x H. 20 x B. 00-207 1 x 9-32/001.S-32R 9-32/001.P-32R 00 900 900 900 H. 900 x B. 00-20 1 x 74 H. 20 x B. 00-209 1 x

PANNELLI CON RICCI FORGIATI A BOCCIOLO PER POGGIOLI E SCALE IN STILE 700 FRANCESE PANELS WITH HAND-MADE ENDING FORGED SCROLLS, FOR BALCONY AND STAIRS, XIIX CENTURY FRENCH STYLE 50 5-32/002.P-32R 500 5-32/002.S-32R 900 20 H. 900 x B. 500-210 1 x AMBIENTAZIONI IN STILE 700 FRANCESE XIIX CENTURY FRENCH STYLE SETTINGS H. 20 x B. 500-211 1 x 5-327/001-327R -205-204 -2-209 -15-20 -213 5-327/002-327R 5-327/003-327R 5-327/004-327R -207-15 -20-214 -211-15 -210-215 5-32/002-32R 5-32/001-32R -15-210 -210-21 -204-217 -205 75

PANNELLI CON RICCI FORGIATI A BOCCIOLO PANELS WITH HAND-MADE ENDING FORGED SCROLLS 940-214R 941/P-214R 941/S-214R 942-214R 45/Z-214R 943-214R H. 1000 x B. 350-21 1x liscio / smooth,000 H. 1000 x B. 350-219 1x liscio / smooth 10,000 H. 1300 x B. 350-220 1x liscio / smooth 10,000 H. 1000 x B. 250-221 1x10 liscio / smooth,000 H. 70 x B. 5-222 1x liscio / smooth 1,950 H. 900 x B. 115-223 1x10 liscio / smooth 2,000 944-214R 922/720-214R 900/20-214R 917/L-214R 917/1-214R 7 H. 900 x B. 5-224 1x10 liscio / smooth 2,000 H. 720 x B. 210-225 H. 950 x B. 20-22 1x10 liscio / smooth 1x10 liscio / smooth,500,000 H. 1140 x B. 320-227 1x10 liscio / smooth,000 H. 1140 x B. 5-22 1x10 liscio / smooth 5,000

PANNELLI CON RICCI FORGIATI A BOCCIOLO PANELS WITH HAND-MADE ENDING FORGED SCROLLS 945/S-215R 250 945/P-215R 210 94-215R 5-544/005-219R 5-544/00-219R 40 530 H. 530 x B. 250-229 1x liscio/smooth 3,00 x 2 H. 40 x B. 210-230 1x liscio/smooth 3,500 x 2 H. 1000 x B. 290-231 1x + 1x10 liscio/smooth 9,000 H. 30 x B. 270-232 4,30 H. 30 x B. 270-233,00 Composto da due pezzi / Made by two pieces 2/Z-215R H. 30 x B. 330-234 1x 3,700 9500-21R 9501-21R 9502-21R 9503-21R 9504-21R 9505-21R 950-21R 9507-21R H. 1000 x B. 205 H. 1000 x B. 225 H. 1000 x B. 225 H. 1000 x B. 202 H. 1000 x B. 202 H. 1000 x B. 20-235 -23-237 -23-239 -240 14+ 14x 14+ 14x 14+ 14x 14+ 14x 14+ 14x 14+ 14x 4,100 3,10 3,00 2,420 3,400 4,00 H. 1000 x B. 240-241 14+ 14x 3,440 H. 1000 x B. 240-242 14+ 14x 3,400 77

PANNELLI CON RICCI FORGIATI A BOCCIOLO PANELS WITH HAND-MADE ENDING FORGED SCROLLS 950-21R 9509-21R 9510-21R 9511-21R 921-21R 922-21R 92-21R H. 1000 x B. 230 H. 1000 x B. 220 H. 1000 x B. 105 H. 1000 x B. 105 H. 900 x B. 40-243 -244-245 -24-247 14+ 14x 14+ 14x + x + x 14+ x 3,750 3,10 1,10 2,500,150 9-341/003-341R H. 90 x B. 250-24 H. 1000 x B. 220-249 1x10 14x 7,500 2,000 91-21R 915-21R H. 370 x B. 50-251 H. 5 x B. 1140 1 H. 40 x B. 950-250 -252 1 24,000 1 17,000 902 900-217R 901-217R 90-217R 909-217R 7 H. 950 x B. 00-253 1+ 1x10 15,000 H. 950 x B. 250 H. 1000 x B. 5 H. 90 x B. 740-254 -2-25 1+ 1x10 1 1+ 1x10,00 2, 15,000 H. 90 x B. 230-257 1+ 1x10,00

PANNELLI CON RICCI FORGIATI A BOCCIOLO PANELS WITH HAND-MADE ENDING FORGED SCROLLS 917-217R 91-217R 919-217R 920-217R 5-575/001-220R 30 970 H. 930 x B. 00-25 1+ 1x10 1,000 H. 50 x B. 320-259 Ø 3 20,000 H. 940 x B. 00-20 20 x 10,500 H. 940 x B. 00-21 20 x 10,500 30 H. 970 x B. 40-22 Ø 9,000 5-572/005-220R 470 5-575/002-220R 5-575/003-220R 5-575/005-220R 5-575/004-220R 50 920 1150 30 930 0 00 H. 930 x B. 40-23 Ø 9,30 30 H. 00 x B. 300-24 H. 700 x B. 300-25 H. 00 x B. 300-2 H. 1150 x B. 420-27 Ø 5,520 Ø 5,50 Ø 5,520 Ø 1 11,19 500-235R 501-235R 502-235R 503-235R 504-235R 505-235R 50-235R 5-572/00-220R 50 920 H. 920 x B. 420-2 Ø 1 10,20 H. 1000 x B. 270 H. 1000 x B. 225 H. 1000 x B. 105 H. 1000 x B. 10-29 -270-271 -272 + x + x + x 3,300 2,900 1,400 1,00 H. 1000 x B. 230-273 + x 2,200 H. 1000 x B. 230-274 + x 1,700 H. 1000 x B. 230-274-1 + x 1,700 79

PANNELLI CON RICCI FORGIATI A VITE PANELS WITH SCREW-LIKE SCROLLS 507-235R 50-235R 509-235R 511-235R 5-235R 514-235R 51-235R 517-235R H. 1000 x B. 1-275 + x 1,500 H. 1000 x B. 157-27 + x 1,700 H. 1000 x B. 157-277 + x 2,350 H. 1000 x B. 195-27 + x 1,700 H. 1000 x B. 270-279 + x 2,00 H. 1000 x B. 2-20 + x 2,200 H. 1000 x B. 15-21 + x 2,000 H. 1000 x B. 15-22 + x 2,000 DISPONIBILE CON TUTTI I SEGNI ZODIACALI PAG. 31 AVAILABLE WITH ALL SIGNS OF ZODIAC PAGE 31 51-23R 519-23R 520-23R 521-23R 522-23R 523-23R 524-23R 525-23R 52-23R 577/Z-23R H. 1000 x B. 19-23 + x 1,400 0 H. 1000 x B. 230-24 + x 1,900 H. 1000 x B. 230 H. 1000 x B. 230 H. 1000 x B. 220 H. 1000 x B. 220 H. 1000 x B. 220-25 -2-27 -2-29 + x + x + x + x + x 2,00 2,700 1,900 1,00 1,450 H. 1000 x B. 170-290 + x 1,400 H. 1000 x B. 170-291 + x 1,770 H. 1000 x B. 205-292 14+ 14 x 2,200

PALETTI FORGIATI CON DISCHI IN VETRO, LEGNO E OTTONE FORGED PICKETS WITH GLASS, WOOD AND BRASS PLATES ATTACCHI PER PALETTI BAR JUNCTIONS 5-57/00-293R 5-57/00-293R 5-577/001-293R VETRO GIALLO YELLOW GLASS 5-577/002-293R VETRO ROSSO RED GLASS 5-577/003-293R VETRO VERDE GREEN GLASS 5-577/004-293R VETRO BLU BLUE GLASS 5-577/005-293R OTTONE BRASS 5-577/00-293R LEGNO WOOD BORCHIA OTTONE 104-274 BRASS STUD 104-274 5-577/007-293R BORCHIA OTTONE 1039-27 BRASS STUD 1039-27 5-577/007-293R 1 32 95 VETRO GLASS -301-1 5-57/009-293R 5-57/007-293R H. 1000 x B. 32 H. 105 x B. 105-301 -302 0 32 95 OTTONE BRASS 0 H. 1150 x 105 H. 1150 x 105 H. 1150 x 105 H. 1150 x 105 H. 1150 x 105 H. 1150 x 105 H. 1150 x Ø 34 H. 1150 x Ø 4-293 -294-295 -29-297 -29-299 -300 Ø Ø Ø Ø Ø Ø Ø Ø 2,150 2,150 2,150 PANNELLI CON RICCI A FORGIATURA SPINATA PANELS WITH HERRING BONE FORGED SCROLLS 10500-234R 10501-234R H. 1000 x 32-303 2,150 2,50 2,00 1,350 1,340 Ø PALETTI E PANNELLI FORGIATI CON CRISTALLI FORGED PANELS AND PICKETS ENRICHED WITH CRYSTALS I VETRI VENGONO VENDUTI SEPARATAMENTE GLASSES SOLD SEPARATELY H. 1150 x 105-304 Ø 1700-293R 1701-293R 1702-293R 1703-293R 1704-293R 1705-293R 170-293R H. 1000 x B. 225-305 14+ 14x 3,720 H. 1000 x B. 235-30 14+ 14x 3,450 10502-2 10503-2 10504-2 H. 1000 x B. 2-307 14+ 14x 3,350 H. 1000 x B. 205-30 14+ 14x 4,000 H. 1000 x B. 20-309 14+ 14x 4,00 H. 1000 x B. H. 1000 x B. H. 1000 x B. 195 H. 1000 x B. 175 H. 1000 x B. 195-310 -311-3 -313-314 Ø su 9-1 Ø su 9-1 Ø 1 alla base/of base Ø 20 alla base/of base Ø 14 alla base/of base 0,0 0,0 5,000 5,000 3,500 H. 1000 x B. 90 H. 1000 x B. 0-315 -31 14 14 1,00 1,00 1

PANNELLI FORGIATI CON RICCI A "SCALPELLO" PANELS WITH "CHISEL-LIKE" FORGED SCROLLS 5-57/001-233R 5-57/002-233R 5-57/003-233R 5-57/004-233R 5-57/005-233R 915 00 0 915 790 0 915 790 H. 920 x B. 245-32 14 4,40 H. 900 x B. 245-329 14 4,90 H. 920 x B. 235-330 3,140 H. 900 x B. 235-331 3,30 H. 920 x B. 235-332 3,30 5-52/009-233R 5-52/010-233R 5-57/00-233R 5-00/010-233R 5-00/00-233R 5-00/009-233R 390 390 0 H. 900 x B. 235-333 3,0 H. 20 x B. 5-335 2,070 H. 990 x B. 230-33 2, H. 990 x B. 230-337 1,50 H. 50 x B. 10-33 1,90 H. 920 x B. 235-339 x 1 3,220 5-59/001-221R 5-59/002-221R 2 H. 750 x B. 90-340/S 14 15,00 H. 750 x B. 90-340/D 14 15,00

PANNELLI FORGIATI CON RICCI A "SCALPELLO" PANELS WITH "CHISEL-LIKE" FORGED SCROLLS 5-572/001-292R 5-572/002-292R 5-572/003-292R 5-572/003A-292R 5-572/004-292R 5-572/004A-292R H. 720 x B. 25-342 Ø 2,220 H. 40 x B. 25-343 1 x 3,20 H. 900 x B. 340-344 Ø 14 5,40 H. 5 x B. 330-345 Ø H. 20 x B. 330-34 su 9-7 4,420 H. x B. 330-347 1-297R F/QB-297R F/QL-297R F/T-297R 1/N-297R 1/Q-297R H. 900 x B. 345 H. 900 x B. 345 H. 900 x B. 340 H. 750 x B. 250-0 H. 75 x B. 20-140 H. 750 x B. 330-34 -349-350 -351-352 -353 su 9-9 liscio/smooth Ø liscio/smooth 20 x 25 x 1 su 9-7,000,000 5,000 2,500 2,700 5,000 1713-297R 1714-297R 1715-297R 5-573/011-292R 5-573/0-292R 171-297R H. 50 x B. 300-354 H. 0 x B. 30 H. 70 x B. 310 H. 40 x B. 270-3 -35-357 20 x Ø Ø Ø 4,200 4,200 3,500 2,700 H. 900 x B. 200-35 14 3,350 H. 900 x B. 400-359 14,90 3

GRECHE IN FERRO PIATTO, QUADRO E TONDO FLAT, SQUARE AND ROUND GRECQUE 150 H. 150 x B. 150-30 1x 100 H. 100 x B. 100-31 x H. 100 x B. 2450-31-1 x 100 H. 100 x B. 2450-32 10-32-1 130 H. 130 x B. 150-33 Ø 744/B-21R 744/1-21R 744/A1-21R 5-573/013-292R 5-573/014-292R H. 15 x B. 15-371 20 x 10 0,50-372 20 x 10 0,950-373 x 0,570 744-21R 744/A-21R 5-517/002-23R H. 900 x B. 130-34 2,420 43/Z-21R H. 900 x B. 130-35 Ø -3 H. 50 x B. 130-35-1 Ø -3-1 2,20-2,30 1,30-1,750 44/Z-21R H. 400 x B. 130-35-2 Ø -3-2 1,000-1,150 49/Z-29R H. 300 x B. 130-35-3 Ø -3-3 0,400-0,500 200/Z-29R H. 1000 x B. 130-37 Ø -3 2,100-2,200 201/Z-29R 17-29R -374 20 x 10 1,150 927-29R -375 x 0,700-37 5/Z-219R 4 H. 0 x B. 250-377 1 20 x 10 3,000 H. 0 x B. 250-37 x 1,950 H. 920 x B. 220-379 1+ 25 x 5 H. 75 x B. 300-30 + H. 75 x B. 250-31 + H. 1000 x B. 2-32 1 x 10+ 1 x 2,00 2,500 1,00 7,200 H. 940 x B. 510-33 50 x + 1 x 3,300 H. 710 x B. 215-34 25 x 3,300

RINGHIERA AUSTRIA 1 RAILING MOD. AUSTRIA 1 500 500 170 720 1000 SPESSORE mm THICKNESS H. 1000 x B. 170-35 H. 720 x B. 500-3/S 3 H. 720 x B. 500-3/D 3 220 1000 20 20 200 200 SPESSORE mm THICKNESS ALCUNE AMBIENTAZIONI SETTING EXAMPLES H. 1000 x B. 220-37 H. 20 x B. 200-3/S 3 H. 20 x B. 200-3/D 3-35 -35-35 -35-39 -37-37 -37-37 -390 5

RINGHIERA AUSTRIA 2 RAILING MOD. AUSTRIA 2 305 200 270 10 0 1000 SPESSORE mm THICKNESS H. 270 x B. 305-392 3 H. 10 x B. 200-392-1 3 20 20 200 200 SPESSORE mm THICKNESS H. 1000-0 x B. 0-391 3 H. 20 x B. 200-3/S 3 H. 20 x B. 200-3/D 3 100 730 0 SPESSORE mm THICKNESS H. 730 x B. 100-393-1 3 140 50 SPESSORE mm THICKNESS ALCUNE AMBIENTAZIONI SETTING EXAMPLES -392 H. 1000 x B. 170-393 3 H. 50 x B. 140-394 3-392 -392-392 -395-392 -392-391 -392-392 -39

ROSONI A FREDDO COLD FORGED ROSETTES 37/F-23R 37/S-23R 371/F-23R 371/S-23R 33-237R 33/S-237R 7-1/F 0,00 7-1/SF 7-2/F 7-2/SF 0,00 0,920 0,20 7-3/F 20 x 4 1,000 7-3/SF 20 x 4 0,920 35/F-23R 35/S-23R 313-237R 313/S-237R 319-237R 319/S-237R 7 H. 390 x B. 390 7-4/F 1,700 H. 390 x B. 390 7-4/SF H. 250 x B. 245 7-5/F 1 x 4 H. 250 x B. 245 7-5/SF 1 x 4 1,400 1,050 1,050 H. 225 x B. 225 7-/F 1 x 4 0,00 H. 225 x B. 225 7-/SF 1 x 4 0,00 3/F-23R 3/S-23R 320-237R 320/S-237R 35/F-237R 35/S-237R H. 250 x B. 195 7-7/F 1 x 4 0,00 H. 250 x B. 195 7-7/SF 1 x 4 0,00 H. 320 x B. 320 7-/F 1,200 H. 320 x B. 320 7-/SF 0,950 7-9/F 0,50 7-9/SF 0,750 324-237R 324/S-237R 329-237R 329/S-237R 329.30-237R 329/S.30-237R 7-10/F 1 x 4 0,900 7-10/SF 1 x 4 0,900 7-11/F 7-11/SF H. 300 x B. 300 7-/F H. 300 x B. 300 7-/SF 0,950 0,50 1,050 0,950 7

ROSONI A FREDDO E A CALDO COLD AND HOT FORGED ROSETTE 343-237R 343/S-237R 330-237R 30/F-23R 32/F-23R 7-13/F 10 x 5 0,00 7-13/SF 10 x 5 0,700 7-14 0,700 H. 335 x B. 335 7-15 Ø 10 1,330 7-1 1,540 939-23R 5-523/002-23R 93-215R 7 5/Z-21R 5-523/004-23R H. 240 x B. 240 7-30 10 0,950 H. 320 x B. 320 7-31 x 1,200 Ø 595 7-32 Ø 900 7-33 H. 00 x B. 00 7-34 1 x 10 5,900 934-213R 935-213R 300/A-23R 319/A-23R 319/B-23R Ø 910 7-35 1 x 10 20,470 Ø 900 7-3 1 x 10 17,000 H. 39 x B. 39 7-37 10 x 5 1,500 H. 340 x B. 340 7-3 x 1,200 H. 330 x B. 330 7-39 x 1,500 529-23R 530-23R 531-23R P2159 P215 301-237R 7-40 x 0,950 H. 400 x B. 250 H. 5 x B. 5 7-41 7-41-1 7-42 7-42-1 Ø x x 0,950 0,950 H. 490 x B. 400 7-43 10 7-43-1 Ø 10 H. 10 x B. 175 7-44 1 x 4 0,420

ROSONI FORGIATI FORGED ROSETTES 1-204R 5-294R 5/A 4-301R H. 750 x B. 750 7-45 1 x su 9-17,400 H. 500 x B. 50 7-4 1 x su 9-17 5,000 H. 500 x B. 50 7-47 su 9-7 - H. 500 x B. 50 7-4 1 x su 9-17 5,000 3-294R 91-302R 937-294R 4/Z-294R 7 H. 00 x B. 00 7-49 1 x su 9-17 7,350 H. 500 x B. 500 7-50 1 x 4,000 7-51 1 x 1,0 H. 1050 x B. 10 7-52 Ø + 1 x,000 93-294R 0532-291R 532-291R 0532/1-291R 0532/2-291R H. 390 x B. 390 7-53,500 H. 405 x B. 405 7-54 3,500 H. 207 x B. 7-54-1 0,20 H. 175 x B. 52 7-54-2 0,200 H. 350 x B. 400 7-20 x 10 2,500 300-237R 300/S-237R 74-291R 5-593/015-23R 5-593/01-23R 745-291R H. 500 x B. 500 7-5 14 5,150 7-57 1,300 Ø 295 7-5 Ø Ø 295 7-5-1 2,40 2,970 H. 35 x B. 35 7-0/F 10 x 5 1,450 H. 35 x B. 35 7-0/SF 10 x 5 1,450 9

ROSONI E MAZZI DI FIORI NON VERNICIATI NOT-PAINTED ROSETTES AND FLOWER BOUQUETS 93-294R 93/A-294R 92-294R 92/A-294R H. 70 x B. 430 7-1/S 1-22R 1/A-22R 2-22R 2/A-22R 400 H. 70 x B. 430 7-1/D 1x 1x 3,50 3,50 H. 520 x B. 300 7-2/S 1x 2,050 H. 520 x B. 300 7-2/D 1x 2,050 420 440 10 7 510 500 500 70 H. 510 x B. 400 7-3 H. 500 x B. 420 7-4 H. 500 x B. 440 7-5 H. 70 x B. 10 7-3-22R 3/A-22R 450 10 4-22R 450 4/A-22R 50 0 70 0 720 H. 0 x B. 450 7-7 H. 70 x B. 10 7- H. 0 x B. 450 7-9 H. 720 x B. 50 7-70 5/A-22R -22R /A-22R 370 225 300 5-22R 430 470 570 700 300 90 H. 300 x B. 430 7-71 H. 470 x B. 370 7-72 H. 570 x B. 225 7-73 H. 700 x B. 300 7-74

ROSONI E MAZZI DI FIORI NON VERNICIATI NOT-PAINTED ROSETTES AND FLOWER BOUQUETS 5-53/001-243R 5-53/002-243R 5-53/003-243R 5-53/004-243R H. 00 x B. 440 7-75 x 1 7,220 H. 30 x B. 50 7-7 x 1 14,0 H. 00 x B. 430 7-77 x 1 5,0 H. 40 x B. 400 7-7 x 1 4,400 5-54/001-23R 5-54/002-23R 5-54/003-23R solo cornice frame only 7 H. 0 x B. 510 7-79 14 battuto / hammered,330 H. 1090 x B. 520 7-0 x 1 liscio / plain 13,210 H. 730 x B. 10 7-1 x 1 10,220 5-54/004-23R 5-55/001-23R -302R H. 590 x B. 400 7-2 x 1 4,10 H. 400 x B. 400 7-3 1,770 H. 45 x B. 70 7-4 Ø + Ø 10+ Ø 4,000 7-302R 9-302R 90-302R H. 70 x B. 5 7-5 Ø 3,0 H. 590 x B. 40 H. 590 x B. 40 7-7-7 Ø 10+ Ø Ø 10+ Ø 2,500 2,500 91

ROSONI E MAZZI DI FIORI NON VERNICIATI NOT-PAINTED ROSETTES AND FLOWER BOUQUETS 5-55/002-24R 1 solo / only Ø 1 battuto / hammered 5-55/003-24R solo cornice frame only 5-55/004-24R 7 H. 15 x B. 470 7- x 1 11,0 H. 420 x B. 400 7-9 4,220 H. 430 x B. 420 7-90 2,50 5-5/001-24R 1 solcato/ fluted solo cornice frame only 14 battuto / hammered solo cornice frame only 5-5/003-24R Ø 10,5 5-5/002-24R H. 70 x B. 510 7-91 9,20 H. 20 x B. 475 7-92 3,750 H. 0 x B. 510 7-93,290 5-57/001-24R 5-57/002-24R 5-5/005-24R 5-5/004-24R 92 H. 510 x B. 370 7-94 3,10 H. 00 x B. 00 H. 920 x B. 00 7-94-1 7-95 7,20 7,20 H. 430 x B. 320 7-9 2,500

ROSONI E MAZZI DI FIORI NON VERNICIATI NOT-PAINTED ROSETTES AND FLOWER BOUQUETS 5-57/004-25R 5-57/005-25R 1 battuto / hammered solo cornice frame only 5-57/003-25R 5-57/00-25R Ø 00 7-99/S 9,0 H. 20 x B. 30 7-97 1,30 H. 50 x B. 340 7-9 3,770 14 battuto / hammed solo cornice frame only 14 battuto / hammed solo cornice frame only 7 5-5/001-25R 5-5/002-25R Ø 00 7-99/D 9,0 5-5/003-25R H. 30 x B. 00 7-100 5,0 H. 0 x B. 510 7-101,790 H. 49 x B. 30 7-102 2,570 1x liscio / smooth 5-5/005-25R 5-5/00-25R 5-5/004-25R H. 440 x B. 490 7-103 2,00 H. 50 x B. 50 H. 50 x B. 50 7-104 7-105 7,90 7,920 93

PANNELLI FORGIATI EX LINEA 0 0 EX LINE FORGED PANELS 750 750 0-301R 0/A-301R 1-301R 750 1/A-301R 750 00 00 00 0 H. 00 x B. 750 H. 00 x B. 750 H. 0 x B. 750 H. 0 x B. 750 7-10/S 7-10/D 7-107/S 7-107/D Ø + Ø 10 Ø + Ø 10 Ø + Ø 10 Ø + Ø 10 9,000 9,000,500,500 00 00 2-301R 2/A-301R 3-301R 3/A-301R 500 500 7 00 00 00 0 H. 00 x B. 00 7-10/S Ø + Ø 10 7,000 H. 00 x B. 00 7-10/D Ø + Ø 10 7,000 H. 0 x B. 500 7-109/S Ø + Ø 10,000 H. 0 x B. 500 7-109/D Ø + Ø 10,000 750 750-301R /A-301R 7-301R 7/A-301R 750 750 00 0 H. 00 x B. 750 7-/S Ø + Ø 10 7,500 H. 00 x B. 750 7-/D Ø + Ø 10 7,500 H. 0 x B. 750 7-111/S Ø + Ø 10 7,000 H. 0 x B. 750 7-111/D Ø + Ø 10 7,000 00 00 9-302R 9/A-302R 520 520-302R /A-302R 00 500 94 H. 00 x B. 00 7-1/S Ø + Ø 10 5,000 H. 00 x B. 00 H. 500 x B. 520 7-1/D 7-113/S Ø + Ø 10 Ø + Ø 10 5,000 4,400 H. 500 x B. 520 7-113/D Ø + Ø 10 4,400

PANNELLI FORGIATI CON RICCI A "SCALPELLO" PANELS WITH "CHISEL-LIKE" FORGED SCROLLS 102-290R 103-290R 105-290R H. 70 x B. 70 7-114 Ø liscio/smooth,000 H. 770 x B. 770 7-115 Ø liscio/smooth,500 H. 520 x B. 520 7-11 Ø liscio/smooth 7,000 10-290R 104-290R 7 4-290R H. 0 x B. 490 7-117 Ø liscio/smooth 7,000 H. 900 x B. 900 7-11 Ø liscio/smooth 9,000 H. 900 x B. 900 7-119 1 x su 9-17 4,250 H. 00 x B. 35 7-0 su 9-7 H. 190 x B. 50 7-4/D4 x H. 350 x B. 170 7-4/D2 10 H. 0 x B. 325 7-4/D1 H. 170 x B. 0 7-4/D3 5-00/005-29R FD-297R H. 325 x B. 0 7-4/D + 10+ + x 4,100 5-/015-292R H. 190 x B. 50 7-4/S3 x H. 350 x B. 170 7-4/S1 10 H. 0 x B. 325 7-4/S2 H. 170 x B. 0 7-4/S4 FS-297R H. 7 x B. 30 7-1 su 9-7 H. 40 x B. 100 H. 270 x B. 410 H. 325 x B. 0 7-2 7-3 7-4/S 7 x 14 su 9-7 + 10+ + x 0,700 1,590 4,100 95

BARRE BUCATE A CALDO HOT PIERCED BARS GREZZE lunghezza standard mm. RAW-IN standard lenght mm. 1/Z-204R SPIGOLATA HAMMERED EDGES 1/ZL-204R LISCIA 1/ZD-204R SPIGOLATA 1/ZDL-204R SMOOTH HAMMERED EDGES LISCIA SMOOTH NUOVO ART. -1 1/Z..0 int. 0 fori 1 NUOVO ART. -2 1/ZL..0 int. 0 fori 1 NUOVO ART. -3 1/ZD..0 int. 0 fori 1 NUOVO ART. -4 1/ZDL..0 int. 0 fori 1-1-1-1-2-1-3 1/Z.14.5 1/Z.14.134 1/Z.14.140 14 int. 5 14 int. 134 14 int. 140-2-1-2-2-2-3 1/ZL.14.5 1/ZL.14.134 1/ZL.14.140 14 int. 5 14 int. 134 14 int. 140-3-1-3-2-3-3 1/ZD.14.5 1/ZD.14.134 1/ZD.14.140 14 int. 5 14 int. 134 14 int. 140-4-1-4-2-4-3 1/ZDL.14.5 1/ZDL.14.134 1/ZDL.14.140 14 int. 5 14 int. 134 14 int. 140-1-4-1-5-1- 1/Z.1.5 1/Z.1.134 1/Z.1.150 1 int. 5 1 int. 134 1 int. 150 fori 13-2-4-2-5-2- 1/ZL.1.5 1/ZL.1.134 1/ZL.1.150 1 int. 5 1 int. 134 1 int. 150 fori 13-3-4-3-5-3- 1/ZD.1.5 1/ZD.1.134 1/ZD.1.150 1 int. 5 1 int. 134 1 int. 150 fori 13-4-4-4-5-4- 1/ZDL.1.5 1/ZDL.1.134 1/ZDL.1.150 1 int. 5 1 int. 134 1 int. 150 fori 13-1-7-1- -1-9 1/Z.1.5 1/Z.1.134 1/Z.1.10 1 int. 5 1 int. 134 1 int. 10 fori -2-7 -2- -2-9 1/ZL.1.5 1/ZL.1.134 1/ZL.1.10 1 int. 5 1 int. 134 1 int. 10 fori -3-7 -3- -3-9 1/ZD.1.5 1/ZD.1.134 1/ZD.1.10 1 int. 5 1 int. 134 1 int. 10 fori -4-7 -4- -4-9 1/ZDL.1.5 1/ZDL.1.134 1/ZDL.1.10 1 int. 5 1 int. 134 1 int. 10 fori -1-10 1/Z.20.134-1-11 1/Z.20.170-1- 1/Z.22.170 20 int. 134 20 int. 170 22 int. 170-2-10 1/ZL.20.134-2-11 1/ZL.20.170-2- 1/ZL.22.170 20 int. 134 20 int. 170 22 int. 170-3-10 1/ZD.20.134-3-11 1/ZD.20.170-3- 1/ZD.22.170 20 int. 134 20 int. 170 22 int. 170-4-10 1/ZDL.20.134-4-11 1/ZDL.20.170-4- 1/ZDL.22.170 20 int. 134 20 int. 170 22 int. 170 ALTEZZA mm HEIGHT -1-2 -3-4 BARRE BUCATE A CALDO CON FORI OVALI HOT PIERCED BARS WITH OVAL HOLES SPIGOLATA LISCIA LISCIA 19/Z-204R HAMMERED EDGES 19/ZL-204R SMOOTH 20/Z-204R SMOOTH 20/ZO-204R NUOVO ART. -5 19/Z..0-5-1-5-2-5-3-5-4-5-5 19/Z.14.140 19/Z.1.150 19/Z.1.10 19/Z.20.170 19/Z.22.170 int. 0 fori 1 14 int. 140 1 int. 150 fori 13 1 int. 10 fori 20 int. 170 22 int. 170 NUOVO ART. - 19/ZL..0 --1 --2 --3 --4 --5 19/ZL.14.140 19/ZL.1.150 19/ZL.1.10 19/ZL.20.170 19/ZL.22.170 int. 0 fori 1 14 int. 140 1 int. 150 fori 13 1 int. 10 fori 20 int. 170 22 int. 170 NUOVO ART. -7 20/Z..0-7-1-7-2-7-3-7-4-7-5-7- -7-7 -7- -7-9 20/Z.14.5 20/Z.14.134 20/Z.14.140 20/Z.1.5 20/Z.1.134 20/Z.1.150 20/Z.1.5 20/Z.1.134 20/Z.1.10-7-10 20/Z.20.5-7-11 20/Z.20.134-7- 20/Z.20.170 Ø int. 0 fori 1 Ø 14 int. 5 Ø 14 int. 134 Ø 14 int. 140 Ø 1 int. 5 Ø 1 int. 134 Ø 1 int. 150 fori 13 Ø 1 int. 5 Ø 1 int. 134 Ø 1 int. 10 fori Ø 20 int. 5 Ø 20 int. 134 Ø 20 int. 170 LISCIA SMOOTH STANDARD NUOVO ART. - 20/ZO Ø 14 int. 140 --1 --2 --3 20/ZO 20/ZO 20/ZO Ø 1 int. 150 fori 13 Ø 1 int. 10 fori Ø 20 int. 170 SU RICHIESTA CONSEGNAMO BARRE BUCARE OVALI CON LUNGHEZZE FINO A 3 METRI E CON INTERASSE E SEZIONI A RICHIESTA ON REQUEST WE CAN SUPPLY OVAL PIERCED BARS WITH LENGHT UP TO 3 mt. AND WITH DISTANCE BETWEEN HOLES AND S UPON REQUEST. -7-13 20/Z.22.170 Ø 22 int. 170 ALTEZZA mm HEIGHT -5 - NOTA: SU RICHIESTA È ANCHE POSSIBILE CONSEGNARE LE NOSTRE BARRE BUCATE CON LUNGHEZZE FINO A 3 METRI E CON INTERASSI E SEZIONI A RICHIESTA. NOTE: ON REQUEST WE CAN SUPPLY OUR PIERCED BARS WITH LENGHT UP TO 3 mt. AND WITH DISTANCE BETWEEN HOLES AND S UPON REQUEST. 9-7 -

BARRE BUCATE A CALDO SABBIATE SANDBLASTEDHOT PIERCED BARS SABBIATE lunghezza standard mm. SAND-BLASTED standard lenght mm. 1/Z-204R SPIGOLATA HAMMERED EDGES 1/ZL-204R LISCIA 1/ZD-204R SPIGOLATA 1/ZDL-204R SMOOTH HAMMERED EDGES LISCIA SMOOTH NUOVO ART. -1S 1/Z..0.S int. 0 fori 1 NUOVO ART. -2S 1/ZL..0.S int. 0 fori 1 NUOVO ART. -3S 1/ZD..0.S int. 0 fori 1 NUOVO ART. -4S 1/ZDL..0.S int. 0 fori 1-1S-1-1S-2-1S-3 1/Z.14.5.S 1/Z.14.134.S 1/Z.14.140.S 14 int. 5 14 int. 134 14 int. 140-2S-1-2S-2-2S-3 1/ZL.14.5.S 1/ZL.14.134.S 1/ZL.14.140.S 14 int. 5 14 int. 134 14 int. 140-3S-1-3S-2-3S-3 1/ZD.14.5.S 1/ZD.14.134.S 1/ZD.14.140.S 14 int. 5 14 int. 134 14 int. 140-4S-1-4S-2-4S-3 1/ZDL.14.5.S 1/ZDL.14.134.S 1/ZDL.14.140.S 14 int. 5 14 int. 134 14 int. 140-1S-4-1S-5-1S- 1/Z.1.5.S 1/Z.1.134.S 1/Z.1.150.S 1 int. 5 1 int. 134 1 int. 150 fori 13-2S-4-2S-5-2S- 1/ZL.1.5.S 1/ZL.1.134.S 1/ZL.1.150.S 1 int. 5 1 int. 134 1 int. 150 fori 13-3S-4-3S-5-3S- 1/ZD.1.5.S 1/ZD.1.134.S 1/ZD.1.150.S 1 int. 5 1 int. 134 1 int. 150 fori 13-4S-4-4S-5-4S- 1/ZDL.1.5.S 1/ZDL.1.134.S 1/ZDL.1.150.S 1 int. 5 1 int. 134 1 int. 150 fori 13-1S-7-1S- -1S-9 1/Z.1.5.S 1/Z.1.134.S 1/Z.1.10.S 1 int. 5 1 int. 134 1 int. 10 fori -2S-7-2S- -2S-9 1/ZL.1.5.S 1/ZL.1.134.S 1/ZL.1.10.S 1 int. 5 1 int. 134 1 int. 10 fori -3S-7-3S- -3S-9 1/ZD.1.5.S 1/ZD.1.134.S 1/ZD.1.10.S 1 int. 5 1 int. 134 1 int. 10 fori -4S-7-4S- -4S-9 1/ZDL.1.5.S 1/ZDL.1.134.S 1/ZDL.1.10.S 1 int. 5 1 int. 134 1 int. 10 fori -1S-10 1/Z.20.134.S -1S-11 1/Z.20.170.S -1S- 1/Z.22.170.S 20 int. 134 20 int. 170 22 int. 170-2S-10 1/ZL.20.134.S -2S-11 1/ZL.20.170.S -2S- 1/ZL.22.170.S 20 int. 134 20 int. 170 22 int. 170-3S-10 1/ZD.20.134.S -3S-11 1/ZD.20.170.S -3S- 1/ZD.22.170.S 20 int. 134 20 int. 170 22 int. 170-4S-10 1/ZDL.20.134.S -4S-11 1/ZDL.20.170.S -4S- 1/ZDL.22.170.S 20 int. 134 20 int. 170 22 int. 170 ALTEZZA mm HEIGHT -1S -2S -3S -4S BARRE BUCATE A CALDO CON FORI OVALI HOT PIERCED BARS WITH OVAL HOLES SPIGOLATA LISCIA LISCIA 19/Z.S-204R HAMMERED EDGES 19/ZL.S-204R SMOOTH 20/Z.S-204R SMOOTH 20/ZO.S-204R NUOVO ART. -5S 19/Z..0-5S-1 19/Z.14.140-5S-2 19/Z.1.150-5S-3 19/Z.1.10-5S-4 19/Z.20.170-5S-5 19/Z.22.170 int. 0 fori 1 14 int. 140 1 int. 150 fori 13 1 int. 10 fori 20 int. 170 22 int. 170 NUOVO ART. -S 19/ZL..0 -S-1 19/ZL.14.140 -S-2 19/ZL.1.150 -S-3 19/ZL.1.10 -S-4 19/ZL.20.170 -S-5 19/ZL.22.170 int. 0 fori 1 14 int. 140 1 int. 150 fori 13 1 int. 10 fori 20 int. 170 22 int. 170 NUOVO ART. -7S 20/Z..0.S -7S-1-7S-2-7S-3-7S-4-7S-5-7S- -7S-7-7S- -7S-9 20/Z.14.5.S 20/Z.14.134.S 20/Z.14.140.S 20/Z.1.5.S 20/Z.1.134.S 20/Z.1.150.S 20/Z.1.5.S 20/Z.1.134.S 20/Z.1.10.S -7S-10 20/Z.20.5.S -7S-11 20/Z.20.170.S -7S- 20/Z.20.170.S -7S-13 20/Z.22.170.S Ø int. 0 fori 1 Ø 14 int. 5 Ø 14 int. 134 Ø 14 int. 140 Ø 1 int. 5 Ø 1 int. 134 Ø 1 int. 150 fori 13 Ø 1 int. 5 Ø 1 int. 134 Ø 1 int. 10 fori Ø 20 int. 5 Ø 20 int. 134 Ø 20 int. 170 Ø 22 int. 170 LISCIA SMOOTH STANDARD NUOVO ART. -S 20/ZO.S Ø 14 int. 140 -S-1 20/ZO.S -S-2 20/ZO.S -S-3 20/ZO.S Ø 1 int. 150 fori 13 Ø 1 int. 10 fori Ø 20 int. 170 SU RICHIESTA CONSEGNAMO BARRE BUCARE OVALI CON LUNGHEZZE FINO A 3 METRI E CON INTERASSE E SEZIONI A RICHIESTA ON REQUEST WE CAN SUPPLY OVAL PIERCED BARS WITH LENGHT UP TO 3 mt. AND WITH DISTANCE BETWEEN HOLES AND S UPON REQUEST. ALTEZZA mm HEIGHT -5S -S NOTA: SU RICHIESTA È ANCHE POSSIBILE CONSEGNARE LE NOSTRE BARRE BUCATE CON LUNGHEZZE FINO A 3 METRI E CON INTERASSI E SEZIONI A RICHIESTA. NOTE: ON REQUEST WE CAN SUPPLY OUR PIERCED BARS WITH LENGHT UP TO 3 mt. AND WITH DISTANCE BETWEEN HOLES AND S UPON REQUEST. -7S -S 97

BARRE PUNZONATE COLD PRESSED PIERCED BAR Lunghezze standard mm. mm standard size Interasse standard mm. 5 centre distance mm 5 holes 15 PROFILI PER INFERRIATE PROFILES FOR GRATES 22/Z-204R 23/Z-204R 24/Z-204R FORO TONDO ROUND HOLE FORO QUADRO OBLIQUO SLATING SQUARE HOLE FORO QUADRO SQUARE HOLE NUOVO -9-9-1-9-2-9-3-9-4-9-5-9- -9-7 -9- -9-9 -9-10 -9-11 -9- -9-13 -9-14 -9-15 -9-1 -9-17 ART. 22/Z.30x. 22/Z.30x10. 22/Z.35x. 22/Z.35x10. 22/Z.40x. 22/Z.40x10. 22/Z.30x.14 22/Z.30x10.14 22/Z.35x.14 22/Z.35x10.14 22/Z.40x.14 22/Z.40x10.14 22/Z.30x.1 22/Z.30x10.1 22/Z.35x.1 22/Z.35x10.1 22/Z.40x.1 22/Z.40x10.1 FORO Ø 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO Ø 14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO Ø 1 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 NUOVO -10-10-1-10-2-10-3-10-4-10-5 ART. 23/Z.30x. 23/Z.30x10. 23/Z.35x. 23/Z.35x10. 23/Z.40x. 23/Z.40x10. -10-23/Z.30x.1-10-13 23/Z.30x10.1-10-14 23/Z.35x.1-10-15 23/Z.35x10.1-10-1 23/Z.40x.1-10-17 23/Z.40x10.1 FORO 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO 14-10- -10-7 -10- -10-9 23/Z.30x.14 23/Z.30x10.14 23/Z.35x.14 23/Z.35x10.14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5-10-10 23/Z.40x.14-10-11 23/Z.40x10.14 40x int. 5 40x10 int. 5 FORO 1 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 NUOVO -11-11-1-11-2-11-3-11-4-11-5 ART. 24/Z.30x. 24/Z.30x10. 24/Z.35x. 24/Z.35x10. 24/Z.40x. 24/Z.40x10. -11-24/Z.30x.1-11-13 24/Z.30x10.1-11-14 24/Z.35x.1-11-15 24/Z.35x10.1-11-1 24/Z.40x.1-11-17 24/Z.40x10.1 FORO 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO 14-11- -11-7 -11- -11-9 24/Z.30x.14 24/Z.30x10.14 24/Z.35x.14 24/Z.35x10.14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5-11-10 24/Z.40x.14-11-11 24/Z.40x10.14 40x int. 5 40x10 int. 5 FORO 1 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 Interasse/centre distance 140-150-10-170-10 479/RN-204R 479-204R 479/R-204R ALTEZZA mm HEIGHT -9-10 BARRE PUNZONATE SU FERRO PIATTO MARTELLATO COME ART. 9-17-5 COLD PRESSED PIERCED BARS ON FLAT HAMME RED BARS, ART. 9-17-5-11 ALTEZZA mm HEIGHT -15-1 14-17 14 ELEMENTI PER PROGRAMMA MODERNO ELEMENTS FOR MODERN PROGRAM 22/ZB-204R ALTEZZA mm HEIGHT NUOVO - --1 --2 --3 --4 --5 ART. PALETTI SCOGLIERA SCOGLIERA PICHETS ALTEZZA mm HEIGHT ALTEZZA mm HEIGHT ALTEZZA mm HEIGHT FORO TONDO ROUND HOLE 22/ZB.30x. 22/ZB.30x10. 22/ZB.35x. 22/ZB.35x10. 22/ZB.40x. 22/ZB.40x10. -- 22/ZB.30x.1 --13 22/ZB.30x10.1 --14 22/ZB.35x.1 --15 22/ZB.35x10.1 --1 22/ZB.40x.1 --17 22/ZB.40x10.1 FORO Ø 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO Ø 14 -- --7 -- --9 22/ZB.30x.14 22/ZB.30x10.14 22/ZB.35x.14 22/ZB.35x10.14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 --10 22/ZB.40x.14 --11 22/ZB.40x10.14 40x int. 5 40x10 int. 5 FORO Ø 1 1300-1 Ø 25 1300-19 Ø 25 1300-20 Ø 30 ALTEZZA mm HEIGHT 1300-21 Ø 25 9-30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 23/ZB-204R FORO TONDO ROUND HOLE FORO TONDO ROUND HOLE FORO TONDO ROUND HOLE FORO OVALE OVAL HOLE NUOVO -13-13-1-13-2-13-3-13-4-13-5 FORO QUADRO OBLIQUO SLATING SQUARE HOLE ART. 23/ZB.30x. 23/ZB.30x10. 23/ZB.35x. 23/ZB.35x10. 23/ZB.40x. 23/ZB.40x10. -13-23/ZB.30x.1-13-13 23/ZB.30x10.1-13-14 23/ZB.35x.1-13-15 23/ZB.35x10.1-13-1 23/ZB.40x.1-13-17 23/ZB.40x10.1 FORO 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO 14-13- -13-7 -13- -13-9 23/ZB.30x.14 23/ZB.30x10.14 23/ZB.35x.14 23/ZB.35x10.14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5-13-10 23/ZB.40x.14-13-11 23/ZB.40x10.14 40x int. 5 40x10 int. 5 FORO 1-13 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 NUOVO -14-14-1-14-2-14-3-14-4-14-5 450 Ø 23 Ø 2 SC-1 320 320 Ø 23 Ø 23 Ø 2 320 320 Ø 2 Ø 2 Ø 31 Ø 23x37 320 Ø 23x37 SC-2 SC-3 SC-4 FORO QUADRO SQUARE HOLE ART. 24/ZB.30x. 24/ZB.30x10. 24/ZB.35x. 24/ZB.35x10. 24/ZB.40x. 24/ZB.40x10. -14-24/ZB.30x.1-14-13 24/ZB.30x10.1-14-14 24/ZB.35x.1-14-15 24/ZB.35x10.1-14-1 24/ZB.40x.1-14-17 24/ZB.40x10.1 320 FORO 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5 FORO 14-14- -14-7 -14- -14-9 24/ZB.30x.14 24/ZB.30x10.14 24/ZB.35x.14 24/ZB.35x10.14 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5-14-10 24/ZB.40x.14-14-11 24/ZB.40x10.14 40x int. 5 40x10 int. 5 FORO 1 Ø 2x41 30x int. 5 30x10 int. 5 35x int. 5 35x10 int. 5 40x int. 5 40x10 int. 5-14 5-19/001 foro ø,5 - fori n hole ø 1/2" - holes n 115 115 H. 1000xB. 25-22 25x 1,30 5-19/002 0 0 foro ø,5 - fori n 17 hole ø 1/2" - holes n 17 H. xb. 25-22-1 25x 2,350 5-19/003 115 115 foro ø,5 - fori n 15 hole ø 1/2" - holes n 15 H. 1000xB. 25-23 25x 1,30 5-19/004 foro ø,5 - fori n 35 hole ø 1/2" - holes n 35 5 5 H. xb. 25-23-1 25x 2,350