SECTION INDEX Hydro-Foam Monitor Stations Overview... I2 Standard Hydro-Foam Monitor Stations 3, 350-750GPM... I3 High-Flow Constant Pressure Hydro-Foam Ranger Monitor Stations 4, 250-1,500 GPM... I4 Drum Kit & Double Drum Kit... I5 Transportable Foam Tote - 265 Gallon (1000 Liter) Capacity... I6 Minuteman Foam Hose Reel Station... I7 Minuteman II Foam Hose Reel Station with Low Flow Hydro-Foam Monitor... I8 Minuteman III Foam Hose Reel Station with Medium Flow Hydro-Foam Monitor...I9-I11 Continuous Flow Hose Reel Station...I12 Hose Reel Foam Station-Bladder Tank Style - 40 Gallon... I13 Quick Attack Foam Cart... I14 Oscillating Monitor Foam Station...I15-I16 PRODUCTS 409-745-3232 I1
Hydro-Foam Monitor Stations *Available in 30 gallon, 55 gallon, 265 gallon containers Product Application Firewater monitors are normally installed, or otherwise made available for exposure protection throughout industrial facilities that process and/or inventory flammable liquids. When employed for water application, they can also serve a dual purpose and be used for applying foam for vapor suppression and/or spill fire protection. Firewater monitors are easily converted to this dual foam/water application through the use of a separate/dedicated foam reservoir and a Hydro-Foam Nozzle installed on each monitor. HYDRO-FOAM MONITOR STATIONS PROVIDE THE FOLLOWING ADVANTAGES over Handline Hose Stations utilizing Inline Eductors. Hydraulic Efficiency Hydro-Foam Monitors operate effectively at lower inlet pressures, when compared to handline nozzles used in conjunction with inline eductors. Inline eductors require a nominal 35% of the available water inlet pressure in order to proportion foam. This pressure drop, when combined with the pressure loss through the delivery hose to the nozzle, translates into required inlet pressures of approximately 50 psi greater than what is needed for Hydro-Foam monitors to operate. Fire Fighting Capability Hydrocarbon spill fires require a minimum nominal foam application density of 0.1 gpm per sq. ft. Therefore, a 100 gpm handline has the capability of controlling and suppressing approximately 1000 sq. ft. of flame surface area. Scaled up, a 500 (750, 1,000) gpm foam water monitor has the capability of controlling and suppressing 5 (7.5, 10) times the flame surface area versus that of a 100 gpm handline nozzle. Operator Safety Monitors flowing between 500 and 1,000 gpm have an effective range which is about 3 times farther than that of a 100 gpm handline. This greater projection of foam or water translates proportionally into more safety for the operator. In addition, when the monitor nozzle is adjusted to the FULL FOG position the higher volume of foam or water provides proportionally more cooling for the operator. Also, (as opposed to handlines) monitors can be set up and adjusted - then temporarily left unattended, if necessary. For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS 409-745-3232 I2
Hydro-Foam Monitor Stations Standard Hydro-Foam Monitor Stations 3, 350-750 GPM General: Hydro-Foam Monitor Stations are recognized as the standard for front-line fire prevention/suppression foam application systems. They are used extensively in hydrocarbon processing and petrochemical plants throughout the world. Hydro-Foam Monitor Stations are typically installed in high-hazard/ high value areas such as process units, tank farms, truck loading racks, rail terminals and marine facilities. Because of their inherent ease of operation, Hydro-Foam Monitor Stations, when used by trained operators and fire fighters, have assisted in the significant reduction of industrial fire losses. Complete Standard Hydro-Foam Station with 3 waterway monitor. 1% or 3% proportioning up to 750 gpm. System consists of: Standard Spectrum Monitor, 3 cast brass with tiller bar manual controls; Hydro-Foam Medium Body Brass Nozzle and Drum Kit. Monitor with either a 3 ASA 150# flanged base, or a 4 ASA 150# flanged base. Hydro-Foam STATION COMPONENTS Hydro-Foam Monitor Station Consists of: 1. Hydro-Foam Nozzle with Flex Hose 2. Spectrum Monitor 3. Drum Kit 4. ThunderStorm ATC Drum By simply opening two valves (for water and foam control), ThunderStorm ATC is easily and safely proportioned and delivered to either cover unignited fuel spills or to apply onto flammable/combustible liquid fire. ThunderStorm AFFF/ATC Standard HYDRO-FOAM MONITOR STATIONS with LW Nozzles Model Flow rate @100PSI Foam Proportioning Foam Duration (minutes) HMS-350-1 350 gpm 1% 15 HMS-350-3 350 gpm 3% 5 HMS-500-1 500 gpm 1% 11 HMS-500-3 500 gpm 3% 3.5 HMS-700-1 700 gpm 1% 7.5 HMS-700-3 700 gpm 3% 2.5 Standard HYDRO-FOAM MONITOR STATIONS with LWNS Nozzles Model Flow rate @100PSI Foam Proportioning Foam Duration (minutes) HMS-500NS-1 500 gpm 1% 11 HMS-500NS-3 500 gpm 3% 3.5 HMS-750NS-1 750 gpm 1% 7.3 HMS-750NS-3 750 gpm 3% 2.4 For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS 409-745-3232 I3
Hydro-Foam Monitor Stations High-Flow Constant Pressure Hydro-Foam Ranger Monitor Stations 4 250-1,500 GPM General: Hydro Foam Monitor Stations are recognized as the standard for front-line fire prevention/suppression foam application systems. They are used extensively in hydrocarbon processing and petrochemical plants throughout the world. Hydro- Foam Monitor Stations are typically installed in high-hazard/high value areas such as process units, tank farms, truck loading racks, rail terminals and marine facilities. Because of their inherent ease of operation, Hydro-Foam Monitor Stations, when used by trained operators and fire fighters, have assisted in the significant reduction of industrial fire losses. Complete High-Flow Constant Pressure Hydro-Foam Station with 4 waterway monitor. Constant metering 1% or 3% proportioning through the entire nozzle. Flow range 250-1500 gpm. System consists of: Ranger HF Series Aluminum Nozzle and Drum Kit. 4 ASA flanged base. By simply opening two valves (for water and foam control), ThunderStorm ATC is easily and safely proportioned and delivered to either cover unignited fuel spills or to apply onto flammable/combustible liquid fire. Hydro-Foam Station Components High Flow Hydro-Foam Monitor Station Consists of: 1. HF-Ranger Automatic Hydro-Foam Nozzle with Flex Hose 2. Spectrum Monitor - 4 3. Drum Kit 4. ThunderStorm ATC Foam Concentrate Drum ThunderStorm AFFF/ATC High Flow Hydro-Foam Monitor Stations Model Flow Range Flow Rate @100PSI Metered Proportioning HMSR 1.0-1 250-1000 gpm 1000 gpm 1% HMSR 1.0-3 250-1000 gpm 1000 gpm 3% HMSR 1.5-1 250-1500 gpm 1500 gpm 1% HMSR 1.5-3 250-1500 gpm 1500 gpm 3% For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS 409-745-3232 I4
Hydro-Foam Monitor Station Accessories Drum Kit & Double Drum Kit A Drum Kit is the link between any Hydro-Foam Nozzle and an atmospheric foam tank. The standard drum kit consists of: flexible reinforced clear foam pick-up hose; foam concentrate valve, pvc, quarter-turn ball type; rigid pvc concentrate pick-up tube ( stinger ); pressure/vacuum vent. Custom configurations can also be provided for use with totes, or larger atmospheric foam tanks. Specify model and flow rate of Hydro-Foam Nozzle and length of hose (if other than 8 ) that Drum Kit is to be used with. Double Drum Kit is used to connect two (2) drums or tanks to a Hydro-Foam Nozzle, and consists of: pvc tee; two (2) flexible hoses; one (1) 90 pvc elbow; two (2) foam concentrate control valves, pvc, quarter-turn ball type; two (2) pvc stingers ; and two (2) pressure/vacuum vents. Drum Kit Double Drum Kit Standard Drum Kits Double Drum Kits DKSB Small Body LW Nozzle DDKSB Small Body LW Nozzle DKHF Medium Body HF Elkhart Nozzle DDKHF Medium Body HF Elkhart Nozzle DKMB-O Medium Body Original Style LW Nozzle DDKMB-O Medium Body Original Style LW Nozzle DKMB-N Medium Body New Style LWNS Nozzle DDKMB-N Medium Body New Style LWNS Nozzle DKBB-R Ranger HF Nozzle DDKBB-R Ranger HF Nozzle PRODUCTS 409-745-3232 I5
Hydro-Foam Monitor Station Accessories Transportable Foam Tote 265 Gallon (1000 Liter) Capacity All Hydro-Foam Monitor Stations can now be supplied with ThunderStorm ATC transportable foam totes. 265 gallons of ThunderStorm ATC concentrate is included with each tote. The larger foam concentrate capacity of the Tote matches up ideally with High Flow Ranger Hydro- Foam Monitor Stations. Molded cross-linked, high density polyethylene tank is equipped with: reinforced metal enclosure; carbon steel base with fork lift channels; threaded top inspection hatch; valved (2 cam-lock) pvc fill/drain bottom fitting. Optional pressure/vacuum vent is provided when used in conjunction with Hydro-Foam Monitor Station. 265 GAL TOTE *Available in 30 gallon, 55 gallon, 265 gallon containers For US and Foreign Patent and Trademark information, please refer to page IP2 PRODUCTS 409-745-3232 I6
Minuteman Foam Hose Reel Station Fixed, self contained hose reel foam station features a built-in foam concentrate storage tank and a 95 GPM (or 60 gpm) 1% (or 3%) foam eductor with water bypass. Includes a 60 gallon stainless steel foam concentrate storage tank, complete with: pressure/vacuum vent; 6 fill opening, capped;.75 drain plug; lifting eyes; rigid concentrate pick-up line to tank bottom. Continuous flow hose reel is equipped with 100 feet of 1.5 hard rubber hose and a constant flow 95 gpm (or 60 gpm) fog/straight stream nozzle. Equipped with brass water inlet manifold. Red polyurethane paint finish. 6 Minuteman Hose Reel Stations Model Model 601 Model 951 Model 603 Model 953 Flow @ 150 PSI 60 gpm 95 gpm 60 gpm 95 gpm Proportioning 1% 1% 3% 3% PRODUCTS 409-745-3232 I7
Minuteman II Foam Hose Reel Station with Low Flow Hydro-Foam Monitor Similar to the standard Minuteman Hose Reel Station, but with the added advantage of preplumbed self educting 150/225 gpm Hydro-Foam Monitor Nozzle. Enables the fire-fighter to knock down the fire from a distance prior to committing via the hoseline. Monitor and hoseline can be used separately or simultaneously with foam or water. System is equipped with a 2 Spectrum Mini-Monitor with Small Body Hydro-Foam Nozzle. System proportions at 1% and/or 3%. Features a built-in foam concentrate storage tank and a 60 gpm (or 95 gpm) 1% (or 3%) foam eductor with water bypass. Includes a 60 gallon stainless steel foam concentrate storage tank, complete with: pressure/vacuum vent; 6 fill opening, capped.75 drain plug; lifting eyes; rigid concentrate pick-up line to tank bottom. Continuous flow hose reel is equipped with 100 feet of 1.5 hard rubber hose and a constant flow 60 gpm (or 95 gpm) fog/straight stream nozzle. Equipped with brass water inlet manifold. Red polyurethane paint finish. Model # 150/601 150/951 150/603 150/953 225/601 225/951 225/603 225/953 Handline Flow @150PSI Monitor Flow @100PSI 60gpm 95gpm 60gpm 95gpm 60gpm 95gpm 60gpm 95gpm 150 150 150 150 225 225 225 225 Proportioning 1% 1% 3% 3% 1% 1% 3% 3% PRODUCTS 409-745-3232 I8
Minuteman III Foam Hose Reel Station with 3 Hydro-Foam Monitor Similar to the standard Minuteman Hose Reel Station, but with the added advantage of a pre-plumbed self educting 350/500 gpm Hydro-Foam Monitor Nozzle. Enables the fire-fighter to knock down the fire from a distance prior to committing via the hoseline. Monitor and hoseline can be used separately or simultaneously with foam or water. System is equipped with a 3 monitor with Hydro-Foam Nozzle. System proportions at 1% and/or 3%. Features a built-in foam concentrate storage tank and a 60 gpm (or 95 gpm) foam eductor with water bypass. Includes a 60 gallon stainless steel foam concentrate storage tank, complete with: pressure/vacuum vent; 6 fill opening, capped.75 drain plug; lifting eyes; rigid concentrate pick-up line to tank bottom. Continuous flow hose reel is equipped with 100 feet of 1.5 hard rubber hose and a constant flow 60 gpm (or 95 gpm) fog/straight stream nozzle. Equipped with brass water inlet manifold. Red polyurethane paint finish. 3 MONITOR Monitor Shut Off Valve Water By-Pass Valve 56 19 Model # 350/601 350/951 350/603 350/953 500/601 500/951 500/603 500/953 Handline Flow @150PSI Monitor Flow @100PSI 60gpm 95gpm 60gpm 95gpm 60gpm 95gpm 60gpm 95gpm 350 350 350 350 500 500 500 500 Proportioning 1% 1% 3% 3% 1% 1% 3% 3% PRODUCTS 409-745-3232 I9
Foam Hose Reel Station with 55 Gallon ThunderStorm ATC 1 x 3 AR/AFFF Foam Drum PRODUCTS 409-745-3232 I10
Foam Hose Reel Station with Medium Flow Hydro-Foam Monitor/Nozzle & 55 Gallon ThunderStorm ATC 1 x 3 AR/AFFF Foam Drum PRODUCTS 409-745-3232 I11
Continuous Flow Hose Reel Stations Spectrum Continuous Flow Hose Reel Stations provide instant, single-person operation of fire fighting hose streams. Only the amount of hose required is unreeled, providing a quicker and potentially safer fire prevention/suppression operation. Continuous Flow Hose Reels are designed for use by trained fire personnel and are typically installed in areas that require supplemental (foam/water) fire protection for: covering small flammable liquid spills; initial intervention fire fighting; or mopping up after flame knockdown. Station components include: continuous flow reel; booster hose; handline AFFF (water) nozzle. Continuous Flow Hose Reel Carbon steel construction. Manual wind with ductile iron straight-in swivel inlet connection and quick release brake. Finished with red polyurethane. Booster Hose High quality hose for either water or foam solution service. Rigid mandrel construction produces a reinforced, round, non-collapsible hose, providing efficient flow, yet also the flexibility required for proper handling during emergencies. Includes cast brass, rocker lug expansion ring couplings. I.D. 1.5 Min Bend Radius 8.5 Maximum W.P. 150 psi Tube Black EPDM Rubber Pressure Safety Factor 4:1 Cover Red EPDM Rubber Wrapped Impression O.D. 1.98 Reinforcement High Tensile Textile Tire Cord Piles Approx. Weight 81 lb. per 100ft. Temp Range -40º to 180º F AFFF ( Water) Nozzle Industrial grade fog/straight stream nozzle. Cast Brass construction. U.L. listed for both Class A & Class B fires. Rated 60 gpm @ 100 psi, narrow fog pattern. Includes twist shut-off (not to replace valve on hose reel inlet). Model No Hose Capacity A B C D E F G H BHR 1.5-100 100 25 26.5 20 11 30 12 27 14 BHR 1.5-200 200 25 26.5 34 11 44 12 41 14 PRODUCTS 409-745-3232 I12
Hose Reel Foam Station-Bladder Tank Style - 40 Gallon The Bladder Tank Handline Hose Reel Foam System provides versatile, initial fire intervention and can easily be operated by one person. Foam System requires no external power source, other than a pressurized water source. The system consists of the following components: PRESSURE VESSEL- Bladder Type ASME carbon steel, 200 psi w.p. pressure vessel, 40 gallon nominal capacity. Mounted on carbon steel support saddles. INTERNAL BLADDER- Buna-N nylon impregnated, mullen burst pressure of 800 psi. Body seams are vulcanized with 1 overlap. Bladder outlets are one piece molded rubber (vulcanized to bladder body). PROPORTIONER- 2, (1% or 3%) threaded ratio controller, cast bras construction. CONTINUOUS FLOW HOSE REEL- Carbon steel construction with rim rewind and hand brake. Booster hose 1.5 x 100 ft. coupled 1.5 M/F NH brass AFFF non-air aspirating brass nozzle (K-Factor=6) with full fog to straight stream adjustment. PIPE, VALVES AND FITTINGS- in contact with foam concentrate are constructed of brass and bronze. Water inlet ball valve is constructed of cast bronze body with stainless steel ball and teflon seat. Foam solution piping is schedule 40 carbon steel. FINISH- one rust resistant prime coat. One finish coat of red polyurethane. COMPONENTS: 1. 40 Gallon, 200 psi Bladder Tank 2. Proportioner 3. Rim rewind hose reel with 100 of 1.5 hard rubber hose 4. Pressure relief valve 5. Concentrate shut-off valve 6. Concentrate fill plug 7. Water vent valve 8. Concentrate vent valve 9. Water drain valve Model- Bladder Tank Foam Hose Reel Station Nozzle Flow @100 psi Proportioning Approx. Foam Duration 1% 3% Approximate Weight 40 gallon tank 60 gpm 1% / 3% 66 minutes 22 minutes 300 lb. PRODUCTS 409-745-3232 I13
Quick Attack Foam Cart More than a portable monitor, the Quick Attack foam cart can easily be operated by one person. Ideal for spill fires in chemical plants and flammable liquid storage areas. A single mobile unit can be used to protect several different remote hazard areas. Unlike eductor style foam stations this unit operates effectively and proportions foam even at low water inlet pressures, down to 75 psi. Foam stream projects from monitor approximately 50 ft. at 70 psi inlet pressure (straight stream in still air). Equipped complete with: supply hose, 2 x 100 ft. coupled 1.5 NH; brass Spectrum Mini-Monitor; pre-plumbed self-educting brass Hydro-Foam Small Body Monitor Nozzle, rated 150 gpm or 225 gpm @ 100 psi inlet. Stainless steel 35 gallon capacity foam concentrate storage tank is fitted with fill opening, pressure vacuum vent and drain valve. 15 semi-pneumatic wheels. Specify 1% and/or 3% proportioning. Red vinyl Quick Attack cover is available as an option. Model Quick Attack Foam Cart Nozzle rating GPM @100 psi Approximate foam duration in minutes Proportioning QA-150-1 150 7.7 1% QA-150-3 150 3.85 3% QA-225-1 225 7.6 1% QA-225-3 225 5.2 3% PRODUCTS 409-745-3232 I14
Oscillating Monitor Foam Station A completely self contained foam storage, proportioning and delivery system. Ideal for truck loading racks, process areas and marine terminals. The Spectrum Model 4 Water Powered Oscillating Monitor is fitted with a Hydro-Foam selfeducting nozzle which draws foam concentrate directly from the storage tank via a flexible pick-up tube with fire resistant flexible sheathing. For higher flow applications the Spectrum Model 4 High Flow Oscillating Monitor is used in conjunction with a Ranger Series (Fixed K or constant pressure) Hydro-Foam Aluminum Nozzle. 1% or 3% fixed or selectable nozzle. 4 150# ASA flange inlet. Tank trim includes: 6 fill; pressure/vacuum vent; tank drain, capped; rigid PVC concentrate pick-up tube to sloped tank bottom. Model Foam Tank (gallons) Nozzle Flow GPM @ 100 psi Approx Foam Duration/ minutes 1% 3% Model 4 Oscillating Monitor Nozzle Size & Material OFS-110-350 110 350 30 10 Medium Flow Medium Body, Brass OFS-165-350 165 350 45 15 Medium Flow Medium Body, Brass OFS-220-350 220 350 63 21 Medium Flow Medium Body, Brass OFS-330-350 330 350 93 31 Medium Flow Medium Body, Brass OFS-110-500 110 500 21 7 Medium Flow Medium Body, Brass OFS-165-500 165 500 33 11 Medium Flow Medium Body, Brass OFS-220-500 220 500 44 14 Medium Flow Medium Body, Brass OFS-330-500 330 500 66 22 Medium Flow Medium Body, Brass OFS-165-700 165 700 22 7 Medium Flow Medium Body, Brass OFS-220-700 220 700 31 10 Medium Flow Medium Body, Brass OFS-330-700 330 700 47 15 Medium Flow Medium Body, Brass OFS-220-1000 220 1000 22 7 High Flow Ranger, Aluminum OFS-330-1000 330 1000 33 11 High Flow Ranger, Aluminum OFS-220-1250 220 1250 17 6 High Flow Ranger, Aluminum OFS-330-1250 330 1250 26 9 High Flow Ranger, Aluminum OFS-220-1500 220 1500 15 5 High Flow Ranger, Aluminum OFS-330-1500 330 1500 22 7 High Flow Ranger, Aluminum PRODUCTS 409-745-3232 I15
Oscillating Monitor Foam Station BILL OF MATERIALS No. Req d Description 1 1 6 FOAM FILL 2 1 FOAM PICK-UP TUBE 3 1 4FT. FIRE RESISTANT FOAM PICK-UP HOSE 4 1 4-150# R.F. FLANGE-WATER INLET 5 1 SPECTRUM OSCILLATING MONITOR, MODEL 4 6 1 ATMOSPHERIC AFFF TANK (C.S. OR S.S.) 7 1 DRAIN, PLUGGED 8 1 STANDARD RED ENAMEL FINISH 9 1 HYDRO-FOAM SELF EDUCTING NOZZLE 10 1.75 PRESSURE RELIEF VENT TANK DATA GALLON A B C D E 110 25 20 24 5.75 48 165 37 20 24 5.75 48 220 48 21 25 5.75 48 330 48 34 36 16.75 48 Hydro-Foam NOZZLE DATA Medium Body Brass Ranger Aluminum Fixed K 350 GPM @ 100PSIG 1000 GPM @ 100PSIG* 500 GPM @ 100PSIG 1250 GPM @ 100PSIG* 700 GPM @ 100PSIG 1500 GPM @ 100PSIG* *Oscillation limited to 90 ARC PRODUCTS 409-745-3232 I16