PIPE SUPPORT & ALIGNMENT SYSTEM CATALOG Catalog 611
The Fastest and Most Economical Method to Postion and Support Plumbing Chase Piping. The Sumner Pipe Support System is designed to eliminate the problems and costs of supporting small diameter pipe in the chase here s how: 1. Sumner Pipe Supports are pre-dimensioned and specifically designed for the application. The Sumner Pipe Support System maximizes a plumber s time by eliminating the time consuming measuring process. Each support is pre-measured and pre-dimensioned for quick, easy installation. Everything a plumber needs is included except a screwdriver! 2. With Sumner, search and decision time is reduced. Forget searching around the supply shack for those bits and pieces necessary to complete the pipe support job. It s all there in each neat, compact Sumner package. $ 3. Sumner Supports mean more efficient inventory. Sumner eliminates the cost of carrying excess inventory! Now you can inventory only what you need. The Sumner product line is pre-packaged, labeled and so compact in size that further savings can be realized by reducing storage area. 4. Sumner Supports provide electrolytic isolation with the use of tape. We all know that the use of tape to isolate a pipe is far from an exact science, and certainly time consuming. Sumner Supports virtually eliminate the use of tape all you need is a Sumner Pipe Support and a screwdriver. 5. Sumner Supports are structurally strong and rigid. Sumner Supports are strong enough to withstand the abuse of other tradesmen working in the chase and allows for piping expansion. Let s face it the Sumner Pipe Support System is the most revolutionary product to appear in the plumbing industry in years!
OPERTATIONS REQUIRED $5.92 $4.93 $3.84 Over 35% on material 3 FIXED DIMENSIONS ELIMINATE COSTLY MEASURING TIME 3 PRE-PACKAGED TO REDUCE EXPENSIVE SEARCH TIME 3 ALLOWS FOR EXPANSION AND CONTRACTION 3 IMPROVES QUALITY AND PRODUCTIVITY 3 NOISE DAMPENING 3 ELECTROLYTIC ISOLATION
POSIFIX PIPEFIX 9-11/16" 8" 6" 4" 9-9/16" 8" 6" 4" 11/16" 4-27/32" 1-13/16" The Posifix is the smallest support specifically designed to fit between studs. Its application is to align and support hot and cold lines with waste piping in a lavatory or sink rough-in. The Posifix is pre-slotted to hold 1/2" or 3/4" supply pipe 4", 6" or 8" apart. The unit mounts on 1" through 1-1/2" waste pipe for perfect alignment. Similar to Posifix, the Pipefix can be used in lavatory or sink rough-ins. The Pipefix application holds and aligns 1/2" and 3/4" supply lines with waste pipe, specifically in tight applications. Only 3-1/2" of wall clearance is required to mount the Pipefix. The support is pre-slotted to hold supply piping 4", 6" or 8" apart. The Pipefix attaches to 1-3/8" through 6-5/8" O.D. vent or waste piping by means of a stainless steel band. The Pipefix is available in two materials: A-503 Polystyrene (yellow) A-603 ABS (orange) STANDARD PACKAGE includes two 1/2" 3/4" clamps, one 1" 1-1/2" clamp and attaching screws. The Posifix is available in A-501 Polystyrene (yellow). STANDARD PACKAGE includes one 7" Quik-Lok stainless steel band, two 1/2" 3/4" clamps and attaching screws. ECONOMY PACKAGE includes one 5" continuous feed stainless steel band, two 1/2" 3/4" clamps and attaching screws. LOAD CAPACITY 4" pipe centers 410 lbs 6" pipe centers 325 lbs 8" pipe centers 260 lbs LOAD CAPACITY 4" centers 782 lbs 6" centers 185 lbs 8" centers 145 lbs
STAKFIX 6" 1-1/4" 1-3/4" O.D. 1-1/2" I.D. 4-1/8" PIPE SUPPORT PART NUMBERS 4-1/4" 4-1/4" The Stakfix is used strictly inside of the chase and attaches to 1-3/8" 6-5/8" O.D. pipe vents or stacks by means of a stainless steel band similar to the Pipefix. The Stakfix has three mounting surfaces for supporting a combination of piping up to 1-1/2", running vertically and/or horizontally. The Stakfix also can be strapped onto metal struts or nailed to wood. Two to three-inch pipe can be supported on the Stakfix by using the U-bolts. The P-551 U-bolt is copper plated to prevent electrolysis. Smaller pipe can be mounted on the Stakfix using either style of clamp. Part No. Description POSIFIX Pieces/ carton Weight lbs 781998 A-501 POSIFIX (Polystyrene) 50 14 PIPEFIX STANDARD PACKAGE 782002 A-503 PIPEFIX (Polystyrene) 50 20 782005 A-603 PIPEFIX (ABS) 50 20 PIPEFIX ECONOMY PACKAGE 782514 A-503 PIPEFIX (Polystyrene) 50 18 782513 A-603 PIPEFIX (ABS) 50 18 STAKFIX STANDARD PACKAGE 782007 A-502 STAKFIX (Polystyrene) 50 22 782000 A-602 STAKFIX (ABS) 50 22 STAKFIX ECONOMY PACKAGE 782512 A-502 STAKFIX (Polystyrene) 50 21 782511 A-602 STAKFIX (ABS) 50 21 The Stakfix is available in two materials: A-502 Polystyrene (yellow) A-602 ABS (orange) STANDARD PACKAGE includes one 7" Quik-Lok stainless steel band, three 1" 1-1/2" clamps, attaching screws and P-556 clips. ECONOMY PACKAGE includes one 5" continuous feed stainless steel band, three 1" - 1/2" clamps, attaching screws and P-556 clips. LOAD CAPACITY Outer End Point Center Point Innermost Point 125 lbs 202 lbs 357 lbs
ACCESSORIES: PLASTIC CLAMPS Standard package consists of 100 clamps and necessary attaching screws. CLAMPS FOR 1/2" 3/4" PIPE: A-553 CLAMPS/Polystyrene (PN 782016) A-653 CLAMPS/ABS (PN 782017) Package Weight 4 lbs 4 lbs CLAMPS FOR 1 1-1/2" PIPE: A-554 CLAMPS/Polystyrene (PN 782018) A-654 CLAMPS/ABS (PN 782019) U-BOLT P-551 (PN 782009) Copper-plated U-Bolt for supporting pipe and tubing with outside diameter of 2" through 2-7/8". U-Bolt works best on Stakfix and comes in standard package of 50 pieces with necessary washers and nuts. STAINLESS STEEL BANDS Stainless steel bands are used with Stakfix and Pipefix for holding pipe and tubing to structural members. Bands can be used in a series for greater capacity. Bands come in the two styles below. A standard pack consists of 50 pieces. PN 782010 P-552 Quik-Lok Stainless steel bands for attaching to 1-3/8 6-5/8" O.D. pipes. PN 782515 5" continuous feed stainless steel bands for attaching to 1-7/8" 5" O.D. pipes. METAL CLIP P-556 (PN 782011) Clips provide a firm mounting plate for attaching screws onto Stakfix. Package consists of 50 pieces. MOUNTING SCREWS Three hex-head/slotted attaching screws available in packages of 50 pieces. PN 782022 1-1/2" screws (for 1/2 3/4" clamp on POSIFIX & STAKFIX) PN 782020 2" screws (for 1/2 3/4" clamp on POSIFIX and 1 1-1/2" clamps on STAKFIX) PN 782021 2-1/2" screws (for 1 1-1/2" clamp on POSIFIX & STAKFIX) 3 lbs 3 lbs 5 lbs 6 lbs 5 lbs 1 lb 1 lb 1 lb 1 lb
TECHNICAL INFORMATION: ASTM Test Method Polystyrene ABS Material High impact Polystyrene KJA Cycolac DH self-extinguishing Tensile Strength D-638 4,900 P.S.I. 6,300 P.S.I. Flexural Strength D-790 6,050 P.S.I. at 73 F 10,000 P.S.I. at 73 F Rockwell Hardness D-785 "L" 66 "M" 40 R100-120 Flammability UL-94 H.B. 1.5 inch/min. V.O. non-dripping/self-extinguishing Flash Point D-1929 725 Non-toxic, when burning emits black smoke with the same properties as wood. 680 Cyclolac KJA, as with wood, paper or other natural product fires, the primary hazards are believed to be heat, steam, soot and carbon monoxide. Suggested Spacing of Supports for Horizontal and Vertical Piping 1-1/2" thru 2-1/2" 3/4" thru 1-1/4" 1/2" and smaller 10' on centers maximum 7' on centers maximum 5' on centers maximum Specifications for Weights of Various Pipe Sizes and Materials Full of Water in Pounds Per Foot Pipe Size Steel Pipe IPS Plastic Copper 1/2".998 0.2886 0.385 3/4" 1.361 0.4401 0.665 1" 2.053 0.684 1.000 1-1/4" 2.921 1.068 1.439 1-1/2" 3.600 1.386 1.910 2" 5.108 2.131 3.085 2-1/2" 7.869 3.146 4.540 NATIONAL AND CITY CODES Uniform Plumbing Code File #1958 City of New York Calendar #679-76-SM
The Sumner Pipe Support & Alignment System is economical, quick to install, and can be adapted to unique installations. Manufacturing Co., Inc. 7514 Alabonson Road Houston, Texas 77088 Telephone: (281) 999-6900 Fax: (281) 999-6966 www.sumner.com