Temperature & Humidity Alert Controller METERS 3 simple steps starting the unit: Insert the SIM card Plug in the sensors connectors Connect the AC power cord. Specifications: AC 90~260V Auto Select Internal 2Ah Rechargeable Battery Non-Stop Operation in AC power loss Alert on AC power loss. - Alert users by when it is too hot or cold - Submersible sensors bundled - Support over 20 meters sensor cable. Laboratory Cold Storage Food Processing Medical Research Food Storage Centre AL--THR Series, Smart Energy Control... Energy Saving, Environment & Properties Protection 2 temperature sensors or x temperature & 1 x humidity sensor Keep track of temperature & humidity Alert user via on high/low temperature or humidity Control of other equipments e.g. air ventilation or dehumidifier Management Software Handling multi controllers in multi sites Internal Rechargeable Battery backup operation in AC loss alert in AC loss. Simple Installation & Setup Alert Controller is designed and built for easy user installation. All the necessary components are assembled inside the unit. Signal cables can be wired directly to the connectors. AL--THR-ST - 2 temperature Sensors. AL--THR-SX - Temperature & Humidity Sensor. AL--THR-X - 2 Analog Channels (water level, pressure sensors). Independent alert high or low level for each temperature or humidity channel. Independent alarm text for each temperature or humidity or analog channel. User programmable alarm text. Automatic delivery to users mobile phone on schedule or alarm triggered. Wall Mountable Application: Temperature & Humidity Alert Controller can be utilized in monitoring the environmental condition for commercial, medical, food, storage, weather station, military, manufacturing industries. It makes use of to alert users of temperature and humidity conditions via. By implementing the bundled Server/Client Software and GSM modem, a management system of multi controllers can be built up to monitor a number of remote sites in one single centre. Features: Alarm Alert Modes, Phone Dial or Both. Each alarm is associated with its own alarm text. Alarm text is programmable by user remotely via or Setup Software. Independent text message for each alarm. Independent text message for close or open triggered alarm. Configuration can be modified by user remotely via or Setup Software. Arm or Disarm by or Setup Software. Relay triggered by alarm or command. Verification of command by return. When will the controller sends the data? On Schedule in periodic interval programmable by user Manual Check by user via command Alarm when temperature/humidity is higher than user preset values Alarm when temperature/humidity is lower than user preset values Alarm when input is triggered Alarm when power supply voltage is low.
METERS Temperature & Humidity Alert Controller Electrical Specification: Programmable high/low temp/humidity values 8 x Alarm Inputs (DC8~15V) N/C, N/O, State Change 3 x Relay Outputs (Dry Contact) N/C, N/O 8 x Mobile Phone Number 2 x Central Station phone number User Programmable text for each alarm 2 x AD Channel: 4 ~ 20mA current type, 12 bit resolution. AC 90~240VA Power Input: DC 7~15V Power Consumption Send/Receive : Standby Mode: Max. Rating: 500mA 20mA <2A Operating Temp: 50 ~ 70 C Standby: 55 ~ 85 C Model Internal AC/DC Adaptor (90~240VAC) Internal Rechargeable Battery 7.4VDC, 2.0Ah Metal Casing AL--THR-X AL--THR-SX AL--THR-ST AC or DC power source Max. 14 days operation backup 205 x 105 x 42 mm Alarm Inputs 8 8 8 Mobile Phone & Centre Number 10 10 10 AC Power Loss Alert AD Channels 2 - - Temperature Channel - 1 2 Humidity Channel - 1 - Internal 5V output for sensors Temperature/Humidity Alert High/Low - AL--THR-SX, Temperature & Humidity Sensors Temperature Sensor: DS18B20 Measuring Range 55 ~ 125 C Accuracy ±0.5 C Humidity Sensor: CHM 01A Measuring Range 0 ~ 100% RH Accuracy ±3% RH Operating Voltage 3.5 ~ 5.5VDC Enclosure PVC Housing Sensor Cable 2 meter (max. 100m) AL--THR-ST, 2 x Temperature Sensors Temperature Sensor: DS18B20 Measuring Range 55 ~ 125 C Accuracy ±0.5 C Operating Voltage 3.5 ~ 5.5VDC Enclosure Steel Housing Submersible Sensor Cable 2 meter (max. 100m) AL--THR: 90~260VAC Auto Select Backup Rechargeable Battery Metal Casing 205 x 105 x 42 mm. AL--THP: Internal Rechargeable Battery Aluminum IP67 Enclosure 210 x 130 x 60 mm. AL--THC: Solar Panel Controller Internal Rechargeable Battery Aluminum IP67 Enclosure 280 x 199 x 90 mm. AL--THV: Internal Rechargeable Battery IP65 PVC Enclosure 180x 100 x 50 mm.
Temperature & Humidity Alert Controller METERS Model AL--THR AL--THV AL--THP AL--THC AC Power & Rechargeable Battery, 7.4V 2Ah - - - Metal Casing - - - PVC Casing (IP65 water proof) - - - Aluminum Casing (IP67 water proof) - - Rechargeable Battery 7.4VDC, 2Ah - - Solar Panel Controller & 12VDC, 2Ah Rechargeable Bat tery Example: AL--THC-SX Solar Panel & Rechargeable Battery Aluminum Casing IP67 water proof 1 x Temperature & 1 x Humidity. - - - Order Part Number: AL--THR/V/P/C-X/SX/ST -X -SX -ST AD Channels (standard 4~20mA input) 2 0 0 Temperature Sensor 0 1 2 Humidity Sensor 0 1 0 Max. Sensor Cable Length (meter) - 100m 100m Free Setup Software Setup software is ready for configuring Alert Controller via or RS232 port. In addition, mobile phone can be used in sending command or receiving data message. 1. Setting up the controller configuration 2. Receiving the live data from controller. Sending Command: Remote setup via by mobile phone in format Local setup via RS232 Receiving : Receiving data via by mobile phone in format Local receiving data via RS232 Mobile Phone (Pro_Setup) Mobile Phone (Pro_Setup) Server Software It provides the data and command management in handling a number of Alert Controllers simultaneously. 1. Configure multi controllers locally and remotely 2. Receiving the live data from multi controllers locally and remotely 3. Maintaining database in XML/SQL/MySQL/Oracle format 4. Allowing a number of client computers to access the data over the network Setup multi controllers: Remote setup via in format GSM Modem Local setup via RS232 Receiving from multi controllers: Remote receiving data via in format GSM Modem Local receiving data via RS232 (Pro_Server) (Pro_Server) (Pro_Server) (Pro_Server) RS232 Cable (3 wire cross link)
METERS Temperature & Humidity Alert Controller Server Client Alert via Pro_Client Email Alert GSM Modem /Alarm on LAN Premium Server - data records - alarm records - devices - clients - emails - mobile phones - alert hl/low levels Server software Keep receiving the from controllers Maintain the historical records in database Manage clients in accessing the data Alert clients in alarm /email/tcp. Client software Keep tracking of temperature/humidity from the server Alert user on alarm temperature or humidity. Manage live data from multi controllers Server Software Manage controllers in multi sites. Web based Software Feature: client Edition Server (A) Management Software Receive via Receive Live Display base Access/ MySQL / SQL Server / Oracle XML Export to Excel Remote Command via Schedule Command Batch Command Temperature & Humidity Alert Send Alarm Alert via TCP network Send Alarm Alert via email Send Alarm Alert via Alert Users Grouping Alert Emails Grouping Multi users and Multi devices support Client Software support Max. Alert Controllers simultaneous support 99999 Devices Management User Authentication & Management Network Client Authentication & Management Web Client support SDK for user development (B) Client Software Bundled Live Display Alarm Alert Graphic Display of Temperature & Humidity Temperature & Humidity Hi/Low Alert Historical Access Web Client Support GS300 GSM Modem bundled 1 Client Software
Multipoint Alret Logger METERS AL- Series, Smart Energy Control for Building Management & Production Plant Max. 8 digital temperature sensors communication via and Ethernet Integra ted management with office network Alarm via both and Ethernet. 8 x Digital Temperature Sensors 1 x Digital Humidity Sensor 6 x Analog Temp. or Humidity Sensors Upload data on schedule or alarm Alarm on high/low temp. & humidity User programmable upload interval 4MB Logging Memory 30000 records of readings. Application: It can be utilized in monitoring the environmental condition for commercial building management, medical, food, storage, weather station, military, manufacturing industries. It alerts users via or Ethernet when any of those 8 x temperature or humidity sensors are too high or low. Laboratory Cold Storage Medical Research Food Storage When will AL--THR-HV upload temperature data? (1) On Schedule is uploaded in interval User Programmable interval (2) Manual Check Query by user (3) Alarm Triggered High/Low Temperature AC Power Loss/Resume. 8 digital temp. sensors 8 digital humid. sensors Food Processing Centre NET Server How it uploads data? - Sending - RS232 Port - Ethernet Server How to receive data? - NET Server * LAN - Server * GSM Modem - * Mobile Phone. 4 relay output e.g turn on/off ventiation fan Mobile Phone AL--THR-HV Features: 8 x digital temperature sensors, 1 x digital humidity sensor Sensors are powered by internal output, no external power is needed 6 x analog channel optional for analog temperature or humidity sensors Programmable high/low alert level of temperature/humidity Independent temperature/humidity alert level for each channel Alarm text of each channel is independent and user programmable Each channel has its own alert level and alarm text 4 x Alarm Inputs, 4 x Relay Outputs Device can be configured by using mobile phone or Ethernet using PC Device can also be configured by PC setup software via COM port or Ethernet All temperature & humidity readings are logged and uploaded via RS232, or Ethernet Programmable Upload Interval (1 mlnute r- 24 hours) Programmable Logging Interval (1 min» 60 min) 4MB Non-volatile Memory storing max. 60 days period or 30000 records Live data and logged data can be retrieved over or Ethernet Server Client Software ready.
METERS Multipoint Alret Logger AC Power & UPS Internal AC/DC power adaptor 90 ~ 240VAC, 9~15VDC Internal 2000mAh Li-ion battery Rechargeable for power backup Sends alarm on AC power loss or resume. AD Channel Signal Type: Precision: 4 ~ 20mA or 0 ~ 5VDC 12 bit AD converter Specifications: Power Input UPS Backup Internal 5VDC Output Sensor rating Power Consumption Metal Casing Temperature & Humidity Sensors 90~240VAC Auto or 10~15VDC 2000mA rechargeable battery (average 14 days operation) 5V, la max. power supply for temperature sensors 1mA each temperature sensor Standby: 20mA, Upload: 500mA 155 x 172 x 54 mm Temperature Humidity Sensor DS18B20 CH1B Range -55 ~ 125 0 C 1 ~ 100% RH Accuracy ±0.5 0 C ±5% RH Resolution 12 bit (0.0625 0 C) 12 bit Power Input 3.5~5.5VDC 3.5~5.5VDC Housing Submersible Steel PVC Sensor Cable 2 meter (max. 100m) 2 meter (max. 100m) Sensor Options: Alarm Input NO/NC/State Change Relay Output Digital Output: Max. DC24V @3A, Max. AC230V @la Voltage Output 5VDC: Sensor power source Standard Shielded Cable Wall Mounted Screw Mounted Model Selection: Specification AL--THR-HV AL--THR-HV-NET AL--HV-NET Transmission & RS232 Ethernet & Ethernet Alarm Ethernet & Ethernet Device Setup & RS232 Ethernet & Ethernet Cinterion MC55i GSM Module 850/900/1800/1900MHz - 850/900/1800/1900MHz RJ45 Port Baud Rate - 10/100M 10/100M Enclosure Metal Power Input DC 9~15V or AC 90~260V 2Ah Rechargeable Battery Backup Max. 7 days operation backup AC or Battery Status Alert Alert on AC power loss or resume Alarm Input / Relay Output 4/4 Analog Channels 6 8 x Temperature Sensors 8 x Submersible (-55~125 C) Steel Housing, 2 meter Extendable up to 100 meter sensor cable 1 x Humidity Sensor o ~ 100% RH, ±3% RH Built-in 5VDC output to sensors Direct temperature humidity sensors power source Logging Interval Programmable (1 ~ 60 minutes) Upload Interval Programmable (1 minute ~ 24 hours) Upload On Schedule / Manual Request / Alarm Triggered Internal Memory 4MB Max. Logged 30000 records Setup Software Local (RS232 or Ethernet) & Remote (optional GSM Modem) Optional Software or NET Server Client Software
Multipoint Alret Logger METERS Programmable High & Low Temp. Programmable High & Low Humid. Water Leakage Alarm Input Alarm Inputs (DC8~15V) N/C, N/O, State Change Relay Outputs (Dry Contact) N/C, N/O Mobile Phone Number& Central Station phone number User Programmable text for each alarm. Power Input AC90~240VA, DC 7~15V Power Consumption: Send/Receive Standby Mode Max. Rating Operating Temp. Standby 500mA 20mA <2A -50 ~ 70 0 C -55 ~ 85 0 C AL--HV-NET support both & Ethernet Free Setup Software Complete set of software is ready for working with ( or NET Alert Controller)., Alarm or Command can be delivered via either or Ethernet: 1. Setting up the controller configuration 2. Receiving the live data from controller How to setup the device? RS232 Ethernet in format over network Setup Mobile Phone (Pro_Setup) Ethernet GPRS Logger How to receive data from device? Upload RS232 Upload Ethernet Upload in format over network Setup Mobile Phone Setup Ethernet Multipoint Temp. Alarm Multipoint Temp. Alarm Net Logger
METERS Multipoint Alret Logger Server Client Alert /Alarm via Client Email Alert GSM Modem /Alarm on LAN AL--HV-NET Server software Receiving the data from controllers Support data from and Ethernet Maintain the records in 4 database types MySQL, SQL Server, Oracle, Access Manage clients in accessing the data Alert clients in alarm /email/tcp. Premium Server - data records - alarm records - devices - clients - emails - mobile phones - alert hl/low levels AL--THR-HV Multipoint Temp. Logger Client software Keep tracking of temperature/humidity from the server Alert user on alarm temperature or humidity Manage live data from multi-dataloggers Manage data loggers in multi-sites. Software Feature: Server Web based client Client Software Edition Server NET Server Models supported AL--THR-HV All models (A) Server Software Receive via Receive via Ethernet - Receive - Live Display base Access/MySQL/SQL Server/Oracle Access/MySQL/SQL Server/Oracle XML Export to Excel Remote Command via Schedule Command Batch Command Temperature & Humidity Alert Water Leakage Alert Send Alarm Alert via TCP network Send Alarm Alert via email Alert Users Grouping Alert Emails Grouping Multi users and Multi devices support Client Software support Max. Alert Controllers simultaneous support 99999 Devices Management User Authentication & Management Network Client Authentication & Management Web Based Access support Direct data access support for user development (B) Client Software Bundled Bundled Live Display Alarm Alert Graphic Display of Temperature & Humidity Temperature & Humidity Hi/Low Alert Historical Access Web Client (Supporting web browser) GS300 GSM Modem bundled 1 1 MRC.VER.01-10.12