NIM High Voltage Power Supplies NIM High Voltage Power Supplies are the best choice for small experiments in which a really low noise feature is expected. offer a new generation of NIM Power Supplies that can operate in daisy-chain network and can be locally or remotely controlled through a dedicated software. In this way it s possible to control up to 128 channels and make of this set-up a complete system. The NIM Line includes also the NDT power supplies, which are hosted in a NIM module and can be plugged in NIM crates for power but have also the chance of Desktop operation thanks to a mains power supply cord. INDEX Power Supplies Modular Pulse Processing Electronics Spectroscopy Solutions Universal Multichannel System VME High Voltage Power Supplies NIM High Voltage Power Supplies Desktop High Voltage Power Supplies High Power Low Voltage System Power Supply Control Software NIM High Voltage Power Supplies... 46 NDT High Voltage Power Supply Family... 50 Educational Kit Liquid Argon TPC Readout System Readout System for Multiplexed Signals Digital Detector Emulator Accessories NIM High Voltage Power Supplies NDT High Voltage Power Supply Family
46 Power Supplies / NIM High Voltage Power Supplies 2014 Product Catalog q NIM High Voltage Power Supplies N1419 4/2/1 Channel 500 V/200 μa NIM HV Power Supply Family The N1419 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1419A and N1419B) are also available. Each channel can provide a ±500 V / 200 μa max output. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. for each channel in the range 1 50 V/s in 1 V/s steps. The module features 10 na Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 1nA. Power supply control can be performed either locally, assisted by a graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of NIM8301. A complete set of software tools is available to control these units, from low level libraries to graphical application software. For detailed information see the Power Supply Control Software section. from the programmed value by more than 2% of set value (minimum 1 V). OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. Special versions available: 2U NIM module with 110-240 Vac plug, USB/Ethernet and touch screen display for desktop operation (NDT1419). See relative section for NIM/desktop modules. x 10 Imon Zoom, increasing Imon resolution to 1 na. Common Features STANDARD N1419-1419A - N1419B 4/2/1 channels in 1U NIM module Under/over-voltage alert, overcurrent and max. voltage protection Graphic colour display Local and Remote control Interlock logic for board enable and Individual channel kill 2U/Desktop (with 110-220 Vac) version available N1419 channel features ±500 V/200 μa output ranges Max Ripple smaller than 5mVpp 50 mv Vset/Vmon resolution 10nA Iset/Imon resolution (optional Imon-Zoom: 1 na) Programmable ramp-up / rampdown ((1-50 V/s) N1419-500 V Programmable Power Supply Family General Selection Table N. of ch. Form Factor Interfaces Model 4 2 1 NIM NIM/DT LOCAL REMOTE N1419 X X X X N1419A X X X X N1419B X X X X NDT1419 X X X X WN1419XAAAAA WN1419AXAAAA WN1419BXAAAA WPERS0147001 WPERS0147002 N1419-4 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.) N1419A - 2 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.) N1419B - 1 Ch NIM Progammable HV Power Supply (±500V, 200μA, 10nA res.) N14XX Customization Imon Zoom N14XX Customization - Internal Common Ground
2014 Product Catalog Power Supplies / NIM High Voltage Power Supplies 47 NIM High Voltage Power Supplies - continued q N1470 4/2/1 Channel 8 kv/3 ma (8 W) NIM HV Power Supply Family The N1470 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1470A and N1470B) are also available. Each channel can provide a ±8 kv max voltage, a 3 ma max current and a 9 W max power (8 W max power when output voltage is larger than ±3 kv). The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. for each channel in the range 1 500 V/s in 1 V/s steps. The module features 50 na Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 5 na. Power supply control can be performed either locally, assisted by a graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of NIM8301. A complete set of software tools is available to control these units, from low level libraries to graphical application software. For detailed information see the Power Supply Control Software section. from the programmed value by more than 2% of set value (minimum 10 V). OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. Special versions available: 2U NIM module with 110-240 Vac plug, USB/Ethernet and touch screen display for desktop operation (NDT1470). See relative section for NIM/desktop modules. 2 channels Low Cost version only locally controllable (N1470AL) 2 channels Low Cost version only remotely controllable (N1470AR) x 10 Imon Zoom, increasing Imon resolution to 5 na. Common Features 4/2/1 channels in 1U NIM module Under/over-voltage alert, overcurrent and max. voltage protection Graphic colour display Local and Remote control Interlock logic for board enable and Individual channel kill 2U/Desktop (with 110-220 Vac) version available Low cost and 2U/Desktop versions available STANDARD N1470 - N1470A - N1470B Low Cost LOCAL N1470AL Low Cost REMOTE N1470AR N1470-8 kv NIM Programmable Power Supply Family N. of ch. Form Factor Interfaces Model 4 2 1 NIM NIM/DT LOCAL REMOTE N1470 X X X X N1470A X X X X N1470B X X X X NDT1470 X X X X N1470AL LC X X X N1470AR LC X X X N1470 channel features ±8 kv/3ma output ranges 200 mv Vset/Vmon resolution 50 na Iset/Imon resolution (optional Imon-Zoom: 5 na) Programmable ramp-up / rampdown (1-500 V/s) WN1470X08AAC WN1470A08AAC WN1470B08AAC WN1470ALCLAA WN1470ALCRAA WPERS0147001 WPERS0147002 N1470-4 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.) N1470A - 2 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.) N1470B - 1 Ch NIM Programmable HV Power Supply (±8kV, 3mA, 50nA res.) N1470AL - 2 Ch NIM Low Cost Locally Progammable HV Power Supply (±8kV, 3mA, 50nA res.) N1470AR - 2 Ch NIM Low Cost Remotely Progammable HV Power Supply (±8kV, 3mA, 50nA res.) N14XX Customization Imon Zoom N14XX Customization - Internal Common Ground
48 Power Supplies / NIM High Voltage Power Supplies 2014 Product Catalog q NIM High Voltage Power Supplies - continued N1471 4/2/1 Channel 5.5 kv NIM HV Power Supply High Accuracy Family The Mod. N1471 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1471A and N1471B) are also available. Each channel can provide a ±5.5 kv / 300 µa output. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. for each channel in the range 1 500 V/s in 1 V/s steps. The module features 5 na Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 500 pa. Power supply control can be performed either locally, assisted by a graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of NIM8301. A complete set of software tools is available to control these units, from low level libraries to graphical application software. For detailed information see the Power Supply Control Software section. from the programmed value by more than 2% of set value (minimum 10 V). OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. Special versions available: 2U NIM module with 220V/110V AC plug for desktop operation (NDT1471). See relative section for NIM/desktop modules. High Resolution models (N1471H/N1471HA/N1471HB e NDT1471H) with 20 µa maximum output and higher current monitor resolution: 1 na or 50 pa If Imon Zoom activated (for High Res. Models, Imon-zoom feature is installed by default). x 10 Imon Zoom, increasing Imon resolution to 500 pa (N1471x models only). Common Features STANDARD N1471 - N1471A/B - N1471H/HA/HB 4/2/1 channels in 1U NIM module Under/over-voltage alert, overcurrent and max. voltage protection Graphic colour display Local and Remote control Interlock logic for board enable and Individual channel kill 2U/Desktop (with 110-220 Vac) version available N1471 channel features ±5.5 kv/300 μa output ranges Max Ripple smaller than 10 mvpp 100 mv Vset/Vmon resolution 5 na Iset/Imon resolution (optional Imon-Zoom: 500 pa) Current offset calibration High resolution versions also available (20 μa max output, Iset/ Imon: 1nA, optional Imon-Zoom: 50 pa) Programmable ramp-up / rampdown (1-500 V/s) N1471-5.5 kv NIM Programmable Power Supply High Accuracy Family General Selection Table Model N. of ch. Form Factor Interfaces 4 2 1 NIM NIM/DT LOCAL REMOTE N1471 X X X X N1471A X X X X N1471B X X X X N1471H X X X X N1471HA X X X X N1471HB X X X X NDT1471 X X X X NDT1471H X X X X WN1471X05AAC N1471-4 Ch NIM Programmable HV Power Supply (±5.5kV, 300µA, 5nA res.) WN1471A05AAC N1471A - 2 Ch NIM Programmable HV Power Supply (±5.5kV, 300µA, 5nA res.) WN1471B05AAC N1471B - 1 Ch NIM Programmable HV Power Supply (± 5.5kV, 300µA, 5nA res.) WN1471HX05AC N1471H - 4 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.) WN1471HA05AC N1471HA - 2 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.) WN1471HB05AC N1471HB - 1 Ch NIM Programmable High CurrentRes. HV Power Supply (±5.5kV, 20µA, 1nA res.) WPERS0147001 N14XX Customization Imon Zoom WPERS0147002 N14XX Customization - Internal Common Ground
2014 Product Catalog Power Supplies / NIM High Voltage Power Supplies 49 COMING SOON N1570 NIM High Voltage Power Supplies - continued 2 Channel 15 kv/1 ma (10 W) NIM HV Power Supply Module q The N1570 provides 4 independent High Voltage channels in a double width NIM mechanics. Each channel can provide a ±15 kv max voltage, a 1 ma max current and a 10 W max power. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through Lemo HV connectors. for each channel in the range 1 500 V/s in 1 V/s steps. The module features 20 na Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 2 na. Module control can take place either locally thanks to a 2.8 Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB or Ethernet, taking advantage of the new 2020 Control Software. from the programmed value by more than 2% of set value. OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. Available Option: 2 channels in 2U NIM module LEMO HV coaxial output connectors Under/over-voltage alert, overcurrent and max. voltage protection 2.8 color touch screen display Local and Remote control (USB2.0/Ethernet) Interlock logic for board enable and Individual channel kill pag 57.. WN1570XAAAAA N1570-2 Ch NIM Programmable HV Power Supply ( ±15kV, 1mA, 20nA res.) N472 4 Channel 6 kv Power Supply The N472 is a double width NIM unit housing 4 independent High Voltage channels. The output voltages range from 0 to ±3 kv / 3 ma, or up to ±6 kv / 1 ma (max. output ripple of 30 mvpp at full load). The output polarity is independently selectable for each channel. All channels have individual settings and feature test points and connectors for the monitoring of voltages and currents. The setting of the output voltages can be done locally, via trimmers located on the front panel, or remotely, via analog signals. The setting of the output maximum Voltage and Current limit can be done only locally via front panel trimmers. The channel polarity, overcurrent status and reaching of the VMAX limit are displayed on front panel LEDs. The High Voltage enable can be set both locally, via front panel switch, and remotely, via an external TTL level. Each channel can be individually turned on, either locally or remotely. The module is intrinsically safe: the High Voltage is present only on the SHV output connectors. The module can be powered either by the NIM crate or with 110/220 Vac via a back panel Standard European connector. Two output ranges: ±3 kv / 3 ma and ±6 kv / 1 ma 4 channels in a double width unit Positive or negative polarity selectable for each channel Local or remote individual channel setting and monitoring Remote HV Enable via TTL common to all channels Hardware HV limit 110/220 Vac external power available WN472XAAAAAA N472-4 Channel NIM High Voltage Power Supply (± 6 kv 1 ma, ± 3 kv 3 ma)
50 Power Supplies / NIM High Voltage Power Supply / NDT High Voltage Power Supply Family 2014 Product Catalog q NDT High Voltage Power Supply Family NDT14xx 4 Channel NIM/Desktop HV Power Supply Family The NDT14xx is a new Power Supply Family providing 4 independent High Voltage channels in both NIM and Desktop form factor. Desktop operation (110/220 AC Powered) needs no crate and enhance portability. For all the versions the output polarity is independently selectable for each channel and channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. Module control can take place either locally thanks to a 2.8 Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB or Ethernet, taking advantage of the new 2020 Control Software. An RS485 communication protocol is also available for daisy chaining up to 32 units. The different versions span from 500 V to 8 kv and from 20 µa to 3 ma, meeting the needs of a wide range of detectors. Current monitoring can be enhanced thanks to the Imon Zoom feature, which increase the resolution of at least a x10 factor. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1 500 V/s in 1 V/s steps. Highligths 4 channels in 2U NIM module 110-220 Vac plug for desktop operation Under/over-voltage alert, overcurrent and max. voltage protection 2.8 color touch screen display Local and Remote control (USB2.0/Ethernet) Interlock logic for board enable and Individual channel kill Available models Model V Full Scale Maximum Current Iset/Imon resolution NDT1470 8 kv 3 ma 50 na (5 na) NDT1419 500 V 200 μa 5 na (0.5 na) NDT1471 5.5 kv 300 μa 5 na (0.5 na) NDT1471H 5.5 kv 20 μa 1 na (50 pa) OVERVOLTAGE and UNDERVOLTAGE warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10 V). OVERCURRENT detection: if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function. Power Supply stand-alone Touch screen for local control Ethernet and USB connection WNDT1419AAAA WNDT1470AAAA WNDT1471AAAA WNDT1471HAAA WPERS0147002 NDT1419-4 Ch NIM/Desktop Progammable HV Power Supply (±500V, 200uA, 5nA res.) NDT1470-4 Ch NIM/Desktop Progammable HV Power Supply (±8kV, 3mA, 50nA res.) NDT1471-4 Ch NIM/Desktop Progammable HV Power Supply (±5.5kV, 300uA, 5nA res.) NDT1471H - 4 Ch NIM/Desktop Progammable High CurrentRes. HV Power Supply (±5.5kV, 20uA, 1nA res.) N14XX Customization - Internal Common Ground