All-State Belting Company

All-State Belting Company PRODUCTS AND SRVICS

All-State Belting Company Corporate Headquarters / Iowa Branch 520 South 18th Street West Des Moines, Iowa 50265-5532 Phone: 515-223-5843 Fax: 515-223-8305 Toll Free: 800-247-4178 Ohio Branch 3890 Twin Creeks Drive Columbus, Ohio 43204-5000 Phone: 614-272-5972 Fax: 614-272-7388 Toll Free: 800-566-1566 WA OR NV CA ID UT AZ MT WY CO NM ND SD N KS OK MN WI MI IA IL MO AR MS NY MI PA OH MD IN WV VA KY NC TN SC AL GA M VT NH MA RI NJ CT D TX LA FL Texas Branch 1400 Lakeway Drive Lewisville, Texas 75057-6000 Phone: 972-434-4222 Fax: 972-434-0250 Toll Free: 800-441-1562 North Carolina Branch 10800-A South Commerce Blvd. Charlotte, North Carolina 28273-6321 Phone: 704-588-4081 Fax: 704-588-4088 Toll Free: 800-241-2258 Four locations to quickly serve your needs

PVC Belting General Conveying Package Handling Incline Belting Food Handling Belt Printing / Machine Tapes Abrasion Resistant Belting Grain Belting Oil and Heat Resistant Belt Wood Products Belting Sheet Rubber Belt Fasteners Fabrications Rubber Cleated Belt Pulley Lagging levator Buckets, Bolts, Nuts and Washers, Belt Fasteners Properties of Belt Compounds and Work Formulas Plastics, Urethane, Rubber Products All-State Belting Company Mission Statement 4 6 8 10 13 16 17 18 19 20 22 23 24 26 27 28 29 30 31 Index Abbreviation Key BB = Bare Back CBS = Cover Both Sides COS = Cover One Side FS = Friction Surface RT = Rough Top LT = Low Temp PIW = Per Inch of Width PVC = Polyvinyl Chloride PU = Polyurethane TPU = Thermo Plastic Polyurethane RFL = Resorcinaol Formaldehyde Blend MOR = Moderate Oil Resistance SOR-SC-FR = Super Oil Resistant, Static Conductive & Fire Retardant PDM = thylene-propylene-diene-terpolymer SBR = Styrene, Butadiene Rubber NBR = Acrylo-Nitrile-Butadiene Rubber RMP = Rubber Modified Product SP = Spun Polyester 3

PVC Belting #1100 PVC 120 Black FS x BB conomical, general purpose specification, ideal for light duty Thickness:.120", Weight:.060 lbs. piw. #1130 PVC 120 Black COS conomical, general purpose specification, with smooth top cover for light duty Thickness:.145", Weight:.080 lbs. piw. #1132 PVC 120 Black COS Low-Temp For applications when low temperatures can be a factor. Thickness:.130", Weight:.069 lbs. piw. Temperature range deg. F: -30 to 180. #1140 PVC 120 Black CBS For package handling and fertilizer Can be used in roller bed and troughed conveyors. Thickness:.160", Weight:.079 lbs. piw. #1200 PVC 150 Black FS x BB conomical, general purpose specification, ideal for medium duty Thickness:.135", Weight:.070 lbs. piw. #1230 PVC 150 Black COS conomical, general purpose specification, with smooth top cover for medium duty Thickness:.160", Weight:.088 lbs. piw. #1250 PVC 150 Black CBS For package handling and fertilizer Can be used in roller bed and troughed conveyors. Thickness:.185", Weight:.100 lbs. piw. Recommended fasteners: Clipper #3, #1251 2-Ply PVC 150# Black CBS For recycling, agricultural, wood and industrial oily Thickness:.160", Weight:.088 lbs. piw. Temperature range deg. F: -20 to 180. #1330 PVC 200 Black COS Heavier duty PVC belt used in the feed and grain industry. Also used for bulk product conveying. Thickness:.210", Weight:.120 lbs. piw. Recommended fasteners: Clipper #4, Alligator Staple #187. #1350 PVC 200 Black CBS Heavier duty PVC belt used in the feed and grain industry. Also used for bulk product conveying. Thickness:.230", Weight:.130 lbs. piw. Recommended fasteners: Clipper #4, Alligator Staple #187. #1430 PVC 250 Black COS Heavier duty PVC belt used in the feed and grain industry. Also used for bulk product conveying. Thickness:.220", Weight:.140 lbs. piw. Minimum pulley diameter: 6". Recommended fasteners: Clipper #4, Alligator Staple #187. #1450 PVC 250 Black CBS For heavier duty Used for feed, grain and bulk material Thickness:.250", Weight:.150 lbs. piw. Minimum pulley diameter: 6". Recommended fasteners: Flexco #140, #1550 PVC 300 Black CBS For heavier duty Used for feed, grain and bulk material Thickness:.300", Weight:.160 lbs. piw. Minimum pulley diameter: 8". Recommended fasteners: Flexco #140, #1650 PVC 350 Black CBS For heavier duty Used for feed, grain and bulk material Thickness:.320", Weight:.170 lbs. piw. Minimum pulley diameter: 8". Recommended fasteners: Flexco #190, 4

PVC Belting #1730 PVC 450 Black COS For heavier duty Used for feed, grain and bulk material Thickness:.330", Weight:.170 lbs. piw. Minimum pulley diameter: 10". Recommended fasteners: Flexco #190, #1750 PVC 450 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.350", Weight:.180 lbs. piw. Minimum pulley diameter: 10". Recommended fasteners: Flexco #190, #1800 PVC 750 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.400", Weight:.208 lbs. piw. Minimum pulley diameter: 18". Recommended fasteners: Flexco #190, #1170 PVC 120 Black Mini Rough Top x BB Conveying boxes and other products on slight inclines/declines. Thickness:.150", Weight:.080 lbs. piw. #1180 PVC 120 Black Rough Top x BB Conveying boxes and other products on inclines/declines. Thickness:.230", Weight:.090 lbs. piw. #1235 PVC 150 Black Rough Top x BB Conveying boxes and other products on inclines/declines. Thickness:.250", Weight:.100 lbs. piw. #1236 PVC 150 Green Super Grip RT x FS Conveying products on severe inclines/declines. Thickness:.320", Weight:.100 lbs. piw. #1275 PVC 170 Red Super Grip RT x FS Conveying products on severe inclines/declines. Thickness:.320", Weight:.100 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: 0 to 180. #1150 PVC 120 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. #1155 PVC 120 Black Crescent Top x BB LT Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. Temperature range deg. F: -30 to 180. #1238 PVC 150 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.250", Weight:.092 lbs. piw. #1335 PVC 200 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.310", Weight:.130 lbs. piw. Recommended fasteners: Clipper #3, Alligator Staple #187. Our PVC belting is made with lowstretch 100% polyester and woven into a strong interwoven carcass. Available in a variety of strengths, colors, compounds, and cover styles to meet your exact requirements. 5

General Conveying #1100 PVC 120 Black FS x BB conomical, general purpose specification, ideal for light duty Thickness:.120", Weight:.060 lbs. piw. #1130 PVC 120 Black COS conomical, general purpose specification, with smooth top cover for light duty Thickness:.145", Weight:.080 lbs. piw. #1131 PVC 120 Black COS Interwoven Plus Used in postal, parcel, distribution centers and airport Thickness:.135", Weight:.066 lbs. piw. Temperature range deg. F: 20 to 180. #1140 PVC 120 Black CBS For package handling and fertilizer Can be used in roller bed and troughed conveyors. Thickness:.160", Weight:.090 lbs. piw. #1200 PVC 150 Black FS x BB conomical, general purpose specification, ideal for medium duty Thickness:.135", Weight:.070 lbs. piw. #1230 PVC 150 Black COS conomical, general purpose specification, with smooth top cover for medium duty Thickness:.165", Weight:.088 lbs. piw. #1250 PVC 150 Black CBS For package handling and fertilizer Can be used in roller bed and troughed conveyors. Thickness:.185", Weight:.100 lbs. piw. #1330 PVC 200 Black COS Heavier duty PVC belt used in the feed and grain industry. Also used for bulk product conveying. Thickness:.210", Weight:.120 lbs. piw. Recommended fasteners: Clipper #4, Alligator Staple #187. #1430 PVC 250 Black COS Heavier duty PVC belt used in the feed and grain industry. Also used for bulk product conveying. Thickness:.220", Weight:.140 lbs. piw. Minimum pulley diameter: 6". Recommended fasteners: Clipper #4, Alligator Staple #187. #1910 PRL2-90SMF UB x BB Black Used in sortation systems. Thickness:.075", Weight:.029 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: 0 to 180. Recommended fasteners: Clipper UX1SP, Alligator Staple #62. #3021 PHR2-160 AT 1/32 x Bare Used in package handling and general conveying Thickness:.134", Weight:.070 lbs. piw. Temperature range deg. F: -20 to 225 #3024 2 Ply 150 Black 1/32 x 1/32 Used in light duty and general conveying Thickness:.180", Weight:.089 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: -20 to 210. Recommended fasteners: Clipper #3, #3120 2 Ply 220 Tan Bare x Bare Used in package handling and general conveying Thickness:.160", Weight:.075 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -40 to 225. #3125 2 Ply 220 Black 1/32 x Bare Medium duty, for sand, gravel and general bulk material Thickness:.172", Weight:.090 lbs. piw. Minimum pulley diameter: 8". Temperature range deg. F: -20 to 200. 6

General Conveying #3450 3 Ply 32 oz. Tan FS x FS Used in light industrial and heavy duty package handling Thickness:.127", Weight:.056 lbs. piw. Temperature range deg. F: -40 to 250. #3500 4 Ply 32 oz. Tan FS x FS Used in light industrial and heavy duty package handling Thickness:.170", Weight:.077 lbs. piw. Temperature range deg. F: -40 to 250. #3815 3 Ply Hot Stock & Water Conveys hot rubber stock when cooled with water, also used in horizontal conveyors. Thickness:.140", Weight:.058 lbs. piw. Temperature range deg. F: -20 to 250. #3820 4 Ply Hot Stock & Water Conveys hot rubber stock when cooled with water, also used in horizontal conveyors. Thickness:.187", Weight:.078 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: -20 to 250. #6400 3 Ply 150 3/16 x BB Rubber Box Belt Used in the corrugated box industry. Thickness:.313", Weight:.070 lbs. piw. Temperature range deg. F: -20 to 150. Recommended fasteners: Clipper #3, #6601 2 Ply MF Green COS Used in incline/decline, discharging, and general conveying Thickness:.080", Weight:.039 lbs. piw. Minimum pulley diameter: 1.30". Temperature range deg. F: 14 to 158. Alligator Staple #62. #6602 3 Ply MF Green COS Used in corrugated folding rail and board mill Thickness:.236", Weight:.115 lbs. piw. Minimum pulley diameter: 6" Temperature range deg. F: 14 to 158. Recommended fasteners: Clipper #3, Alligator Staple #187. #6615 2 Ply MF Green Matte x FS Used in check out counter Thickness:.079", Weight:.040 lbs. piw. Minimum pulley diameter: 1.18". Temperature range deg. F: 23 to 176. Recommended fasteners: Clipper #36SP, Alligator Staple #62. #6626 Polymate 100 R Black Used in package handling and general conveying Thickness:.110", Weight:.055 lbs. piw. Minimum pulley diameter: 1-1/2". Temperature range deg. F: 10 to 160. Alligator Staple #62. #6631 Polymate 120 Black Used for diverter belts, general conveying and as live roller belt. Thickness:.115", Weight:.040 lbs. piw. Temperature range deg. F: 10 to 175. Alligator Staple #62. #6645 Trackmate 120 Black Used in package handling and general conveying Thickness:.100", Weight:.050 lbs. piw. Minimum pulley diameter: 1-1/2". Temperature range deg. F: -10 to 180. Alligator Staple #62. #6670 Trackmate 713 Black Used in package handling and general conveying Thickness:.170", Weight:.170 lbs. piw. Temperature range deg. F: -10 to 180. #6633 Trackmate 533 Black Used in accumulation, baggage handling and induction conveyor Thickness:.150", Weight:.080 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper #2SP, #6546 Ulti-Mate 80 Black Used in accumulation, discharging, diverting and general conveying Thickness:.100", Weight:.030 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: -10 to 176. Recommended fasteners: Clipper #36SP, Alligator Staple #62. 7

General Conveying #6542 Ulti-Mate 140 Black Used in baggage/package handling, general conveying and live roller Thickness:.140", Weight:.040 lbs. piw. Temperature range deg. F: -10 to 175. Alligator Staple #62. #6647 Ulti-Mate 140 HM BOS Black Used in baggage/package handling, general conveying and live roller. Thickness:.140", Weight:.040 lbs. piw. Temperature range deg. F: -10 to 175 Recommended fasteners: Clipper #2SP, Alligator Staple #62. #6543 Ulti-Mate 140 HM SD Black Used in package handling and and live roller Thickness:.145", Weight:.042 lbs. piw. Temperature range deg. F: 10 to 250. Recommended fasteners: Clipper #2SP, Alligator Staple #62. #6635 Ulti-Mate 240 Black Used for accumulation, discharging, and diverting. Also used for Infeed, merge and general conveying. Thickness:.220", Weight:.070 lbs. piw. Minimum pulley diameter: 5". Temperature range deg. F: 10 to 175. Recommended fasteners: Clipper #4-1/2, Alligator Staple #187. #6636 Ulti-Mate 240 Green Used for accumulation, discharging, and diverting. Also used for Infeed, merge and general conveying. Thickness:.220", Weight:.070 lbs. piw. Minimum pulley diameter: 5". Temperature range deg. F: 10 to 175. Recommended fasteners: Clipper #4-1/2, Alligator Staple #187. Our general conveying belts come in a full range of carcasses, compounds and covers. Suitable for light and medium applications in which a wide variety of packages, products and materials need to be conveyed. #1170 PVC 120 Black Mini-Rough Top x BB Non-Skid surface for slight incline and decline Thickness:.160", Weight:.074 lbs. piw. Temperature range deg. F: 0 to 180. Recommended fastener: Clipper #2SS. #1900 PRL2-90SMF Longitudinal Rib x BB Non-Skid surface for incline/ decline and induction Thickness:.124", Weight:.056 lbs. piw. Minimum pulley diameter: 1-1/2". Temperature range deg. F: 0 to 180. Recommended fastener: Clipper UCM36SS. #6642 Trackmate 135 Black Longitudinal Rib x BB For inclines/declines. Has low-noise and fire retardant characteristics. Thickness:.173", Weight:.074 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper #2HT, Clipper #2SS. #6634 Trackmate 447 Black Rough Top For inclines/declines. Has low-noise and fire retardant characteristics. Thickness:.200", Weight:.070 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper #2HT, Clipper #2SS. #1190 PVC 120 PH Black Friction x Friction Used in short center and transport conveyor systems. Thickness:.125", Weight:.055 lbs. piw. Temperature range deg. F: -10 to 200. Recommended fastener: Clipper #1SS. #1205 PVC 150 "S" Black Friction x Friction Used in transport, merge and divert conveyor systems. Thickness:.150", Weight:.060 lbs. piw. Temperature range deg. F: -10 to 200. Recommended fasteners: Clipper #3HT, Clipper #3SS. #1230 PVC 150 Black COS Used transport and scan conveyor systems. Package Handling Thickness:.160", Weight:.080 lbs. piw. Recommended fastener: Clipper #2SS. 8

Package Handling #1905 PRL2-90SMF Black Matte x BB Used in scale conveyor systems. Thickness:.086", Weight:.040 lbs. piw. Temperature range deg. F: 0 to 180. Recommended fastener: Clipper UCM36SP. #1910 PRL2-90SMF Black Urethane Back x BB Used in sortation conveyor systems. Thickness:.075", Weight:.029 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: 0 to 180. Recommended fastener: Clipper UCM36SP. #3825 PRL2-90SMF BB x BB Black Used in sortation and secondary transport conveyor systems. Thickness:.113", Weight:.060 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: -20 to 225. Recommended fasteners: Clipper #1HT, Clipper #1SS. #3830 PHR3-135MF BB x BB Black Used in transport, merge divert and high speed conveyor systems. Thickness:.150", Weight:.075 lbs. piw. Minimum pulley diameter: 3-1/2" Temperature range deg. F: -20 to 225. Recommended fasteners: Clipper #2HT, Clipper #2SS. #3840 PHR3-200TW BB x BB Black Used in van lines, slide induction and incompatible conveyor systems. Thickness:.150", Weight:.070 lbs. piw. Minimum pulley diameter: 3-1/2". Temperature range deg. F: 0 to 180. Recommended fasteners: Clipper #3HT, Clipper #3SS. #5950 PHR2-90MF Black Light Impression x BB Used in servo induct and "N" extendo systems. Thickness:.141", Weight:.070 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: 0 to 180. Recommended fasteners: Clipper #1HT, Clipper #1SS. #5960 PHR2-160 Black Light Impression x BB Used in curves and pick mod systems. Thickness:.135", Weight:.065 lbs. piw. Minimum pulley diameter: 3-1/2". Temperature range deg. F: -20 to 210. Recommended fasteners: Clipper #1HT, Clipper #1SS. #6632 Trackmate 529 Black Used in transport and sortation conveyor systems. Has low noise characteristics. Thickness:.120", Weight:.060 lbs. piw. Recommended fasteners: Clipper #1HT, Clipper UCM36SS. #6647 Ulti-Mate 140 HM BOS Black Used in baggage/package handling, general conveying and live roller. Thickness:.140", Weight:.040 lbs. piw. Temperature range deg. F: -10 to 175. Recommended fasteners: Clipper #2SP, Alligator Staple #62. #3900 4 Ply Tan Sliptop Used in package handling and wide merge systems. Thickness:.125", Weight:.062 lbs. piw. Recommended fasteners: Clipper #1HT, Clipper #1SS. #6549 TF22 High tension drive belt. Thickness:.090", Weight:.044 lbs. piw. Temperature range deg. F: -4 to 149. #6535 1.77" Drive Belt Used in accumulation systems and as live roller belt. Thickness:.162", Weight:.080 lbs. piw. Temperature range deg. F: -10 to 176. For meeting the demands of the package/baggage handling industries. Available in a variety of strengths, compounds, and cover styles to provide the right belt for virtually all markets and 9

Incline Belting #1150 PVC 120 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. #1155 PVC 120 Black Crescent Top x BB LT Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. Temperature range deg. F: -30 to 180. #1238 PVC 150 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.255", Weight:.110 lbs. piw. #1335 PVC 200 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.310", Weight:.130 lbs. piw. Recommended fasteners: Clipper #3, Alligator Staple #187. #1170 PVC 120 Black Mini Rough Top x BB Conveying boxes and other products on inclines/declines. Thickness:.150", Weight:.080 lbs. piw. #1180 PVC 120 Black Rough Top x BB Conveying boxes and other products on inclines/declines. Thickness:.230", Weight:.080 lbs. piw. #1235 PVC 150 Black Rough Top x BB Conveying boxes and other products on inclines/declines. Thickness:.250", Weight:.100 lbs. piw. Minimum pulley diameter: 2.5". #1236 PVC 150 Green Super Grip RT x BB Conveying products on severe inclines/declines. Thickness:.320", Weight:.100 lbs. piw. #1275 PVC 170 Red Super Grip RT x BB Conveying products on severe inclines/declines. Thickness:.320", Weight:.117 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: 0 to 250. #6000 2 Ply 150 Black Rough Top x BB Light industrial package handling for inclines/declines. Thickness:.280", Weight:.090 lbs. piw. Temperature range deg. F: -30 to 212. #6001 PHR2-160 AT Rough Top x BB Used in package and baggage handling Thickness:.259", Weight:.083 lbs. piw. Temperature range deg. F: -20 to 225. #6005 2 Ply 150 Tan Rough Top x BB Light industrial package handling for inclines/declines. Non-marking. Thickness:.297", Weight:.089 lbs. piw. Temperature range deg. F: -30 to 180. #6010 3 Ply 32 oz. Black Rough Top x BB Light industrial package handling for inclines/declines. Thickness:.328", Weight:.089 lbs. piw. Temperature range deg. F: -30 to 180. #6020 3 Ply 225 Red Carboxylated RT x BB Used in box, lumber, paper and stamping Thickness:.284", Weight:.100 lbs. piw. Temperature range deg. F: 0 to 250. 10

Incline Belting #6030 3 Ply 150 Blue Carboxylated RT x BB Used in box, paper, stamping and lumber Thickness:.274", Weight :.105 lbs. piw. Temperature range deg. F: -20 to 300. #6230 3 Ply 135 Brown Nitrile Rough Top x BB Used in package handling applications when oils are present. Thickness:.313", Weight:.095 lbs. piw. Temperature range deg. F: 20 to 212. #6240 3 Ply 105 Tan Pure Gum RT x BB Light industrial package handling for inclines/declines. Thickness:.328", Weight:.117 lbs. piw. Temperature range deg. F: -30 to 180. #6300 2 Ply 150 Black Diamond Top x BB Package handling, distribution centers and baggage systems. Thickness:.306", Weight:.108 lbs. piw. Temperature range deg. F: -40 to 250. #6310 2 Ply 150 Tan Diamond Top x BB Package handling, distribution centers and baggage systems. Thickness:.306", Weight:.108 lbs. piw. Temperature range deg. F: -40 to 250. #6330 3 Ply 135 Tan Diamond Top x BB Package handling, distribution centers and baggage systems. Thickness:.358", Weight:.128 lbs. piw. Temperature range deg. F: -40 to 250. #6335 3 Ply 240 Tan Diamond Top x BB Package handling, distribution centers and baggage systems. Thickness:.390", Weight:. 208 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: -40 to 200. Recommended fasteners: Clipper #4, Alligator Staple #187. #6612 2 Ply Black Longitudinal Rib x BB Used in luggage and package handling Thickness:.110", Weight:.056 lbs. piw. Temperature range deg. F: 14 to 176. Recommended fastener: Clipper UCM36. #6600 2 Ply MF Grey Longitudinal Rib x BB Used in incline and decline conveyor Thickness:.118", Weight:.056 lbs. piw. Minimum pulley diameter: 1-1/2". Temperature range deg. F: -20 to 225. Recommended fastener: Clipper UCM36. #6603 2 Ply MF Green Rough Top x BB For incline/decline of package handling, box and tote Thickness:.217", Weight:.068 lbs. piw. Temperature range deg. F: 14 to 176. Recommended fastener: Clipper UCM36. #6623 2 Ply MF Blue Rough Top x BB Used in corrugated box, stamping, and lumber Thickness:.260", Weight:.083 lbs. piw. Temperature range deg. F: 0 to 250. Recommended fastener: Clipper #1. #6650 2 Ply MF Green Basket Weave x BB Used in packaged goods and luggage Thickness:.090", Weight:.044 lbs. piw. Temperature range deg. F: 23 to 176. Recommended fastener: Clipper UCM36SP. #6656 2 Ply MF Grey Snake Skin x BB Used in airports, distribution centers and packaged goods Thickness:.083", Weight:.040 lbs. piw. Minimum pulley diameter: 1-1/4". Temperature range deg. F: 23 to 176. Recommended fastener: Clipper UCM36SP. #6516 Polymate Klingtop Nitrile Brown For inclines/declines and sanding/ grinding operations. Thickness:.280", Weight:.075 lbs. piw. Temperature range deg. F: -10 to 175. Recommended fasteners: Clipper #5, 11

Incline Belting #6648 Polymate Klingtop Black For inclines/declines, package handling, acceleration and metering Thickness:.280", Weight:.075 lbs. piw. Temperature range deg. F: -10 to 175. #6649 Polymate Rufftop Black For inclines/declines, induction and package handling Thickness:.110", Weight:.075 lbs. piw. Temperature range deg. F: 10 to 160. Recommended fastener: Clipper #1. #6642 Trackmate 120 Black Longitudinal Rib Developed for baggage handling. Low noise and excellent tracking. Lightweight but strong. Thickness:.135", Weight:.066 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fastener: Clipper #1. #6643 Trackmate 135 Black Longitudinal Rib Developed for baggage handling. Low noise and excellent tracking. Lightweight but strong. Thickness:.173", Weight:.074 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fastener: Clipper #2SP. #6644 Trackmate 120 Black Rough Top Developed for baggage handling. Low noise and excellent tracking. Lightweight but strong. Thickness:.225", Weight:.075 lbs. piw. Minimum pulley diameter: 3-1/2". Temperature range deg. F: -10 to 180. Recommended fastener: Clipper #1. #6634 Trackmate 447 Black Rough Top Developed for baggage handling. Low noise and excellent tracking. Lightweight but strong. Thickness:.200", Weight:.070 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fastener: Clipper #2SP. #3114 2 Ply 185 Black Continuous Chevron Used in tube conveyors and free flowing material Thickness:.245", Weight:.100 lbs. piw. Temperature range deg. F: -40 to 225. #3171 2 Ply 220 1/8 x 1/16 Vee-Cleat Used in sand, gravel and small rock Thickness:.552", Weight:.203 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140; #375; R2. See Below #3172 2 Ply 220 1/8 x 1/16 MOR Vee-Cleat Conveying bulk materials where moderate oil resistance is needed. Thickness:.552", Weight:.203 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140; #375; R2. See Below #3175 3 Ply 330 1/8 x Bare MOR Vee-Cleat Conveying bulk materials where moderate oil resistance is needed. Thickness:.571", Weight:.210 lbs. piw. Minimum pulley diameter: 14". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140; #375; R2. See Below #3035 2 Ply 150 1/16 x Bare MOR Mini-Bucket Top Conveying bulk materials where moderate oil resistance is needed. Thickness:.336", Weight:.100 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -40 to 225. See Below #5150 2 Ply 220 3/64 x 3/64 Mini-Bucket Top For free flowing materials in the grain industry where oil is present. Thickness:.413", Weight:.150 labs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -30 to 225. Recommended fasteners: Flexco #140; #375; R2. See Below Cleat Specifications #3171, #3172 & #3175 Cleat Height:.25" Cleat Width: 5.75" Cleat Wall Depth: 2.25" Cleat Centers: 4" #3035 & #5150 Cleat Height:.16" Cleat Width: 2" Cleat Wall Depth: 1" Cleat Centers:.81" Cleat Wall Depth Cleat Width Cleat Height Cleat Centers 12

Food Handling Belt #6611 1 MF White Polyurethane Used in confectionery, cooling, weigh scales and general conveying Thickness:.020", Weight:.010 lbs. piw. Minimum pulley diameter: 0.30". Temperature range deg. F: -22 to 176. #6604 2 MF White Polyurethane Used in cooling, discharge, package handling and general food Thickness:.050", Weight:.022 lbs. piw. Minimum pulley diameter: 0.60". Temperature range deg. F: -22 to 176. Recommended fastener: Clipper #36SP. #6597 2 MF White PU (N)(AS) Used in discharging, packaging, weighing and general conveying Thickness:.051", Weight:.025 lbs. piw. Minimum pulley diameter: 0.50". Temperature range deg. F: -4 to 212. Recommended fastener: Clipper #36SP. #6607 2 MF White Heavy Polyurethane Used in cooling, packaging, metering and general food Thickness:.070", Weight:.034 lbs. piw. Minimum pulley diameter: 0.50". Temperature range deg. F: -4 to 212. Recommended fastener: Clipper UCM 36. #6609 2 MF White COS Used in dough, dairy, meat and poultry Thickness:.096", Weight:.060 lbs. piw. Minimum pulley diameter: 1.50". Temperature range deg. F: 20 to 180. #2SP. #6627 2 NF PU-AM Blue Used for baked goods and in a variety of general food Thickness:.022", Weight:.050 lbs. piw. Minimum pulley diameter: 0.50". Temperature range deg. F: -4 to 212. Recommended fastener: Clipper #36SP. #6515 FAB-2+H15 Used in cooling, delivery and food processing Thickness:.030", Weight:.011 lbs. piw. Minimum pulley diameter: 0.16". Temperature range deg. F: -22 to 176. #6563 FAB-5+H15 Used in delivery, processing, conveying and weighing Thickness:.050", Weight:.024 lbs. piw. Minimum pulley diameter: 0.16". Temperature range deg. F: -22 to 176. Recommended fasteners: Clipper #25SP. #6564 FAB-8+H15 Used in delivery, processing and conveying Thickness:.060", Weight:.030 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: -22 to 176. Recommended fasteners: Clipper #36SP. #6565 FNB-5+H15 Used in discharging, packaging, weighing and general conveying Thickness:.050", Weight:.024 lbs. piw. Minimum pulley diameter: 0.16". Temperature range deg. F: -22 to 176. Recommended fasteners: Clipper #36SP. #6566 FNB-6V+H15 Used in accumulation and general conveying Thickness:.060", Weight:.027 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: -22 to 176. Recommended fasteners: Clipper #36SP. #6567 FNB-8V+H15 Used in discharging, processing, conveying and packaging Thickness:.060", Weight:.030 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: -14 to 176. Recommended fasteners: Clipper #36SP. #6598 FNB-12VCQ+H15 Used in dairy, fruit, meat, poultry and vegetable Thickness:.070", Weight:.037 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: -22 to 176. Recommended fasteners: Clipper #36SP. #7000 PVC 120 White COS Used in general food processing Thickness:.135", Weight:.065 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper #1. 13

Food Handling Belt #6606 2 Ply White Bare x Bare Used in general food processing Thickness:.60", Weight:.030 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: 14 to 194. Recommended fastener: Clipper #36. #6605 2 MF White Inverted Pyramid For slight inclines, resistant to animal, vegetable and mineral oils. Thickness:.100", Weight:.048 lbs. piw. Temperature range deg. F: 14 to 158. Recommended fastener: Clipper UCM36SP. #6613 2 MF White Polyurethane Pebble Top Used in bakery, meat, poultry and frozen food Thickness:.093", Weight:.046 lbs. piw. Minimum pulley diameter: 1.50". Temperature range deg. F: -5 to 212. Recommended fastener: Clipper UCM36SP. #6608 2 MF White Nipple Top Used in bread molder/panner and slicing Thickness:.110", Weight:.042 lbs. piw. Minimum pulley diameter: 1.18". Temperature range deg. F: 14 to 158. Recommended fastener: Clipper UCM36SP. #6610 2 Ply White Cotton Poly x Bare Used for the process of molding and forming raw dough. Thickness:.087", Weight:.036 lbs. piw. Temperature range deg. F: 20 to 180. Recommended fastener: Clipper UX-1SP. Joining method: Step/Skive Splice. #7090 2 Ply 70 3/64 x FS White Nitrile xcellent resistance to oils, fats and greases in the food industry. Thickness:.090", Weight:.048 lbs. piw. Minimum pulley diameter: 2" Temperature range deg. F: 0 to 250. Recommended fasteners: Clipper UCM36, Clipper UX-1SP. #7120 3 Ply 105 3/64 x FS White Nitrile xcellent resistance to oils, fats and greases in the food industry. Thickness:.124", Weight:.063 lbs. piw. Minimum pulley diameter: 2.50". Temperature range deg. F: 0 to 250. Recommended fasteners: Clipper UX-1, Clipper #2SP. #7130 3 Ply 135 3/64 x FS White Nitrile xcellent resistance to oils, fats and greases in the food industry. Thickness:.135", Weight:.069 lbs. piw. Temperature range deg. F: 0 to 250. Recommended fasteners: Clipper U2, #7300 3 Ply 135 White Nitrile Meatcleat Used in meat packing, poultry and seafood processing Thickness:.254", Weight:.090 lbs. piw. Temperature range deg. F: 0 to 250. Recommended fasteners: Clipper U2, #6628 Polymate 135 COS-W+15 For overhead dough transports and cooling. Thickness:.145", Weight:.058 lbs. piw. Recommended fasteners: Clipper U2. Joining method: Finger Splice #7410 PVC 120 White Crescent Top x BB For inclines, reversing belt allows liquids to drain from wet material. Thickness:.240", Weight:.090 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper UX-1. #7415 PVC 120 White Rough Top x FS Used in food processing incline conveyor Thickness:.310", Weight:.095 lbs. piw. Temperature range deg. F: -10 to 180. Recommended fasteners: Clipper UX-1. #7200 3 Ply 90 Teflon COS Used in food and confectionery applications where easy release of hot and sticky materials is needed. Thickness:.094", Weight:.049 lbs. piw. Temperature range deg. F: -65 to 300. Recommended fasteners: Clipper 1A, Alligator Staple #62. #6616 TPU-2 Blue For meat and poultry processing; food inspection lines; candy producers and bakeries. Thickness:.079", Weight:.043 lbs. piw. Minimum pulley diameter: 1.25". Temperature range deg. F: -20 to 140. Joining method: Butt Splice. 14

Food Handling Belt #6617 TPU-3 Blue For meat and poultry processing; food inspection lines; candy producers and bakeries. Thickness:.118", Weight:.064 lbs. piw. Minimum pulley diameter: 0.15". Temperature range deg. F: -20 to 140. Joining method: Butt Splice. #6619 TPU-3 Blue Inverted Pyramid For meat, poultry, candy and dairy facilities. Thickness:.120", Weight:.054 lbs. piw. Minimum pulley diameter: 0.15". Temperature range deg. F: -20 to 140. Joining method: Butt Splice. #6620 TPU-2 Tan For meat and poultry processing; food inspection lines; candy producers and bakeries. Thickness:.079", Weight:.043 lbs. piw. Minimum pulley diameter: 1.25". Temperature range deg. F: -20 to 140. #6621 TPU-3 Tan For meat and poultry processing; food inspection lines; candy producers and bakeries. Thickness:.118", Weight:.064 lbs. piw. Minimum pulley diameter: 1.50". Temperature range deg. F: -20 to 140. Joining method: Butt Splice. #6622 TPU-4 Tan For meat and poultry processing; food inspection lines; candy producers and bakeries. Thickness:.157", Weight:.085 lbs. piw. Minimum pulley diameter: 2.50". Temperature range deg. F: -20 to 140. Joining method: Butt Splice. #6620-A TPU-2 Blue Reinforced Same as #6616-6621 but with reinforced fabric to minimize stretch. Thickness:.076", Weight:.034 lbs. piw. Minimum pulley diameter: 1.25". Temperature range deg. F: -5 to 170. Recommended fastener: Clipper UCM36SP. Joining method: Finger/Butt Splice. #6621-A TPU-3 Blue Reinforced Same as #6616-6621 but with reinforced fabric to minimize stretch. Thickness:.115", Weight:.054 lbs. piw. Temperature range deg. F: -5 to 170. Recommended fastener: Clipper UX-1SP. Joining method: Finger/Butt Splice. #6657 FHW-3-SD Super Drive FHB-3-SD Super Drive For meat and poultry processing. Thickness:.118", Weight:.062 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: -5 to 170. Joining Method: Butt Splice #6660 3 Ply White Depanner Used in bread depanner Thickness:.177", Weight:.062 lbs. piw. Temperature range deg. F: 14 to 230. #3948 2 Ply Solid Woven Cotton Used in food and baking Thickness:.094", Weight:.028 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: -60 to 225. Recommended fasteners: Clipper UX-1SP. #3949 3 Ply Solid Woven Cotton Used in food and baking Thickness:.125", Weight:.040 lbs. piw. Temperature range deg. F: -60 to 225. Recommended fasteners: Clipper #1. #3950 4 Ply Solid Woven Cotton Used in food and baking Thickness:.187", Weight:.053 lbs. piw. Temperature range deg. F: -60 to 225. Recommended fasteners: Clipper #2. Additional Lightweight Products & Services: Field Vulcanization Rubber and Urethane Deboning Belts Plastic Modular Belting Urethane Timing Belts Survey of Facility Large Inventory from Locations Throughout the U.S. mergency Service 15

Printing / Machine Tapes #6506 F-1 Machine tape Thickness:.050", Weight:.020 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: 0 to 180. Joining method: Skive Splice. #6507 HAM-5P Used in paper handling and processing applications Thickness:.040", Weight:.015 lbs. piw. Minimum pulley diameter: 0.60". Temperature range deg. F: -4 to 121. Joining method: Skive Splice. #6511 HAT-5 Used in machine tape and paper handling Thickness:.060", Weight:.030 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: 32 to 176. Joining method: Skive/Finger Splice. #6508 MAM-5P For machine tape, paper handling and sheeters/cross cutters. Thickness:.050", Weight:.020 lbs. piw. Minimum pulley diameter:.08". Temperature range deg. F: -4 to 140. Joining method: Butt/Skive/Finger Splice. #6512 MNT-8P Used in folder belt, machine tape and paper handing Thickness:.070", Weight:.026 lbs. piw. Minimum pulley diameter: 1". Temperature range deg. F: -4 to 212. #6559 CM-14/30F Used in folder gluer and live roller Thickness:.120", Weight:.063 lbs. piw. Minimum pulley diameter: 1.20". Temperature range deg. F: -4 to 149. #6560 CM-14/40F Used in folder gluer and live roller Thickness:.160", Weight:.082 lbs. piw. Minimum pulley diameter: 1.60". Temperature range deg. F: -4 to 149. #6561 CM-14/50F Used in folder gluer Thickness:.200", Weight:.098 lbs. piw. Temperature range deg. F: -4 to 149. #6510 MAM-04H Machine tape Thickness:.060", Weight:.024 lbs. piw. Minimum pulley diameter: 0.60". Temperature range deg. F: -22 to 140. Joining method: Butt/Skive/Finger Splice. #6509 MAT-5P Machine tape and paper handling Thickness:.060", Weight:.026 lbs. piw. Minimum pulley diameter: 0.80". Temperature range deg. F: -4 to 212. Joining method: Butt/Skive/Finger Splice. #6504 MNT-5P Used in folder belt, paper handling and processing Thickness:.040", Weight:.020 lbs. piw. Minimum pulley diameter:.080". Temperature range deg. F: -4 to 140. Machine tapes are central to many processes, they convey, speed up, slow down, position and if necessary fold paper and cardboard that is to be processed. Our machine tapes have been manufactured with an abrasive resistant NBR finish or finishes. This provides the industry with effective and comprehensive belting solutions that are extremely reliable, demonstrate continuous grip and long service lives. 16

Abrasion Resistant Belting #3020 2 Ply 150 Black 1/32 x Bare conomical belt used in light duty Thickness:.150", Weight:.070 lbs. piw. Minimum pulley diameter: 6". #3024 2 Ply 150 Black 1/32 x 1/32 conomical belt used in light duty Thickness:.180", Weight:.089 lbs. piw. Minimum pulley diameter: 8". #3125 2 Ply 220 Black 1/32 x Bare Used in small to medium rock and general bulk material Thickness:.172", Weight:.090 lbs. piw. Minimum pulley diameter: 8". #3151 2 Ply 220 Black 1/8 x 1/16 Used in small to medium rock and general bulk material Thickness:.308", Weight:.151 lbs. piw. Minimum pulley diameter: 10". Recommended fasteners: Flexco #140, #3161 2 Ply 220 Black 3/16 x 1/16 Used in small to medium rock and general bulk material Thickness:.370", Weight:.183 lbs. piw. Minimum pulley diameter: 10". Recommended fasteners: Flexco #140, #3301 3 Ply 330 Black 3/16 x 1/16 xcellent abrasion resistance in heavy duty aggregate Thickness:.425", Weight:.206 lbs. piw. Minimum pulley diameter: 12". Recommended fasteners: Flexco #190, #550, R5. #3311 3 Ply 330 Black 1/4 x 1/16 xcellent abrasion resistance in heavy duty aggregate Thickness:.460", Weight:.255 lbs. piw. Minimum pulley diameter: 12". Recommended fasteners: Flexco #190, #550, R5. #3191 1 Ply 330 Black 1/4 x 1/8 xcellent abrasion resistance in heavy duty aggregate Thickness:.520", Weight:.252 lbs. piw. Minimum pulley diameter: 16". Recommended fastener: Flexco R6. #3385 1 Ply 440 Black 1/4 x 1/8 xcellent abrasion resistance in heavy duty aggregate Thickness:.531", Weight:.260 lbs. piw. Minimum pulley diameter: 18". Recommended fastener: Flexco R6. #3321 4 Ply 440 Black 1/4 x 1/16 xcellent abrasion resistance in heavy duty aggregate Thickness:.530", Weight:.271 lbs. piw. Minimum pulley diameter: 16". Recommended fasteners: Flexco #190, #550, R6. #3390 3 Ply 600 Black 1/4 x Bare xcellent abrasion resistance in heavy duty aggregate Thickness:.495", Weight:.251 lbs. piw. Minimum pulley diameter: 18". Recommended fasteners: Flexco #190, #550, R6. #3395 3 Ply 600 Black 3/8 x 3/32 xcellent abrasion resistance in heavy duty aggregate Thickness:.713", Weight:.363 lbs. piw. Minimum pulley diameter: 18". Recommended fasteners: Flexco #190, #550, R6. Our fabric reinforced conveyor belts fulfill a wide variety of bulk material handling tasks in all types of industry. The high strength fabric plies are suitable for most heavy duty operations. High quality rubber covers are designed to operate in many different environments and conditions. 17

Grain Belting #5110 2 Ply 220 Black 1/16 x 1/16 SOR-SC-FR Used for conveyor and elevator belting in the grain and agricultural industry. Thickness:.270", Weight:.132 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -30 to 200. Maximum elevator cup projection: 6". #5325 3 Ply 330 Black 1/16 x 1/16 SOR-SC-FR Used for conveyor and elevator belting in the grain and agricultural industry. Thickness:.312", Weight:.157 lbs. piw. Minimum pulley diameter: 14". Temperature range deg. F: -30 to 200. Maximum elevator cup projection: 8". #5360 4 Ply 440 Black 1/16 x 1/16 SOR-SC-FR Used for conveyor and elevator belting in the grain and agricultural industry. Thickness:.344", Weight:.182 lbs. piw. Minimum pulley diameter: 18". Temperature range deg. F: -30 to 200. Maximum elevator cup projection: 10". #5610 3 Ply 600 Black 1/16 x 1/16 SOR-SC-FR Used for conveyor and elevator belting in the grain and agricultural industry. Thickness:.344", Weight:.172 lbs. piw. Minimum pulley diameter: 18". Temperature range deg. F: -30 to 200. Maximum elevator cup projection: 10". #5700 4 Ply 800 Black 1/16 x 1/16 SOR-SC-FR Used for conveyor and elevator belting in the grain and agricultural industry. Thickness:.406", Weight:.207 lbs. piw. Minimum pulley diameter: 24". Temperature range deg. F: -30 to 200. Maximum elevator cup projection: 11". #1230 PVC 150 Black COS Used in fertilizer and bulk material Thickness:.160", Weight:.088 lbs. piw. #1250 PVC 150 Black CBS Used in fertilizer and bulk material Thickness:.185", Weight:.100 lbs. piw. Maximum elevator cup projection: 5". #1330 PVC 200 Black COS Used in heavy duty feed, grain and bulk product Thickness:.195", Weight:.120 lbs. piw. Recommended fasteners: Clipper #4, Alligator Staple #187. #1350 PVC 200 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.230", Weight:.140 lbs. piw. Maximum elevator cup projection: 6". #1430 PVC 250 Black COS Used in heavy duty feed, grain and bulk product Thickness:.230", Weight:.140 lbs. piw. Minimum pulley diameter: 6". Recommended fasteners: Clipper #4, Alligator Staple #187. #1450 PVC 250 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.250", Weight:.150 lbs. piw. Minimum pulley diameter: 6". Maximum elevator cup projection: 6". #1550 PVC 300 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.300", Weight:.160 lbs. piw. Minimum pulley diameter: 8". Maximum elevator cup projection: 7". #1650 PVC 350 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.320", Weight:.170 lbs. piw. Minimum pulley diameter: 8". Maximum elevator cup projection: 8". #1750 PVC 450 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.350", Weight:.180 lbs. piw. Minimum pulley diameter: 10". Maximum elevator cup projection: 9". 18

#1800 PVC 750 Black CBS Used for elevator belting in the feed and grain industry. Thickness:.400", Weight:.208 lbs. piw. Minimum pulley diameter: 18". Maximum elevator cup projection: 10". #1150 PVC 120 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. #1155 PVC 120 Black Crescent Top x BB LT Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.230", Weight:.090 lbs. piw. Temperature range deg. F: -30 to 180. #1238 PVC 150 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.255", Weight:.110 lbs. piw. #1335 PVC 200 Black Crescent Top x BB Conveying bulk solids. Reversing belt allows liquids to be drained. Thickness:.310", Weight:.130 lbs. piw. Recommended fasteners: Clipper #3, Alligator Staple #187. #3114 2 Ply 185 Black Continuous Chevron For tube conveyors and free flowing materials. Thickness:.245", Weight:.100 lbs. piw. Temperature range deg. F: -40 to 225. #3035 2 Ply 150 1/16 x Bare * MOR Mini-Bucket Top Conveying bulk materials where moderate oil resistance is needed. Thickness:.336", Weight:.100 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -40 to 225. #5150 2 Ply 220 3/64 x 3/64 * Mini-Bucket Top For free flowing materials in the grain industry where oil is present. Thickness:.413", Weight:.150 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -30 to 225. Recommended fasteners: Flexco #140, #3172 2 Ply 220# 1/8 x 1/16 * MOR Vee-Cleat Conveying bulk materials where moderate oil resistance is needed. Thickness:.552", Weight:.203 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140, #3175 3 Ply 330# 1/8 x Bare * MOR Vee-Cleat Conveying bulk materials where moderate oil resistance is needed. Thickness:.571", Weight:.210 lbs. piw. Minimum pulley diameter: 14". Temperature range deg. F: -40 to 225 Recommended fasteners: Flexco #140, Grain Belting Oil & Heat Resistant Belting #3185 2 Ply 220 Black 3/16 x 1/16 Hot Asphalt For hot asphalt, oil-coated roofing granules and hot petroleum coke. Thickness:.370", Weight:.183 lbs. piw. Minimum pulley diameter: 10" Temperature range deg. F: -20 to 350 Recommended fasteners: Flexco #140, R2. #3190 2 Ply 220 Black 3/16 x 1/16 PDM Used for conveying materials up to 400 degrees Fahrenheit. Thickness:.370", Weight:.175 lbs. piw. Minimum pulley diameter: 10" Temperature range deg. F: -25 to 400 Recommended fasteners: Flexco #140, R2. #3317 3 Ply 330 Black 1/4 x 1/16 PDM Used for conveying materials up to 400 degrees Fahrenheit. Thickness:.460", Weight:.248 lbs. piw. Minimum pulley diameter: 12" Temperature range deg. F: -25 to 400 Recommended fasteners: Flexco #190, R6. * See page 12 for cleat specifications. 19

Wood Products Belting 20 #3125 2 Ply 220 Black 1/32 x Bare Used in agricultural and general bulk material Thickness:.172", Weight:.090 lbs. piw. Minimum pulley diameter: 8". Temperature range deg. F: -20 to 200. #3135 2 Ply 220 Black 1/8 x Bare MOR Used in lumber, wood chips, bark and whole grain Thickness:.245", Weight:.119 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -20 to 200 Recommended fasteners: Alligator #187, Flexco #3152 2 Ply 220 Black 1/8 x 1/16 MOR Used in lumber, wood chips, bark and whole grain Thickness:.308", Weight:.151 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -20 to 200. Recommended fasteners: Flexco #140, #3162 2 Ply 220 Black 3/16 x 1/16 MOR Used in lumber, wood chips, bark and whole grain Thickness:.370", Weight:.193 lbs. piw. Minimum pulley diameter: 10". Temperature range deg. F: -20 to 200 Recommended fasteners: Flexco #140, #3198 3 Ply 240 Black 1/16 x Bare MOR Used in lumber, wood chips, bark and whole grain Thickness:.203", Weight:.094 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -20 to 200 Recommended fasteners: Flexco #140, #187, R2. #3280 3 Ply 330 Black 1/8 x 1/16 MOR Used in lumber, wood chips, bark and whole grain Thickness:.363", Weight:.174 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -20 to 200. Recommended fasteners: Flexco #140, #3290 3 Ply 330 Black 3/16 x Bare MOR Used in lumber, wood chips, bark and whole grain Thickness:.363", Weight:.174 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -20 to 200. Recommended fasteners: Flexco #140, #3305 3 Ply 330 Black 3/16 x 1/16 MOR Used in lumber, wood chips, bark and whole grain Thickness:.425", Weight:.206 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -20 to 200. Recommended fasteners: Flexco #190, #550, R5. #3191 1 Ply 330 Black 1/4 x 1/8 Conveying heavy or large materials such as logs or crushed stone. Thickness:.520", Weight:.252 lbs. piw. Minimum pulley diameter: 16". Recommended fasteners: Flexco #190, #550, R6. #3385 1 Ply 440 Black 1/4 x 1/8 Conveying heavy or large materials such as logs or crushed stone. Thickness:.531", Weight:.257 lbs. piw. Minimum pulley diameter: 18". Recommended fasteners: Flexco #190, #550, R6. #3319 4 Ply 500 Black 1/4 x Bare MOR Used in lumber, wood chips, bark and whole grain Thickness:.500", Weight:.246 lbs. piw. Minimum pulley diameter: 18". Temperature range deg. F: -20 to 200. Recommended fasteners: Flexco #190, #550, R6. #3172 2 Ply 220 1/8 x 1/16 * Black Vee-Cleat MOR For conveying products up an incline where MOR is needed. Thickness:.552", Weight:.203 lbs. piw. Minimum pulley diameter: 12". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140, #3175 3 Ply 330 1/8 x Bare * Black Vee-Cleat MOR For conveying products up an incline where MOR is needed. Thickness:.571", Weight:.210 lbs. piw. Minimum pulley diameter: 14". Temperature range deg. F: -40 to 225. Recommended fasteners: Flexco #140, #3390 3 Ply 600 Black 1/4 x Bare xcellent abrasion resistance in heavy duty aggregate Thickness:.495", Weight:.251 lbs. piw. Minimum pulley diameter: 18". Recommended fasteners: Flexco #190, #550, R6. * See page 12 for cleat specifications.

Wood Products Belting #6230 3 Ply 135 Brown Nitrile Rough Top x Bare Used in package handling applications when oils are present. Thickness:.313", Weight:.095 lbs. piw. Temperature range deg. F: 20 to 212. #6030 3 Ply 150 Blue Carbox. Rough Top x Bare Used in box, paper, stamping and lumber Thickness:.274", Weight:.105 lbs. piw. Temperature range deg. F: -30 to 300. #1236 PVC 150 Green Super Grip RT x BB Conveying products on severe inclines/declines. Thickness:.320", Weight:.100 lbs. piw. Temperature range deg. F: 20 to 180. Recommended fasteners: Clipper #3, Alligator Staple #187. #6300 2 Ply 150 Black Diamond Top x Bare Used on steep inclines/declines for package handling Thickness:.306", Weight:.108 lbs. piw. Temperature range deg. F: -40 to 250. #6310 2 Ply 150 Tan Diamond Top x Bare Used on steep inclines/declines for package handling Thickness:.306", Weight:.108 lbs. piw. Temperature range deg. F: -40 to 250. #6330 3 Ply 135 Tan Diamond Top x Bare Used on steep inclines/declines for package handling Thickness:.358", Weight:.128 lbs. piw. Temperature range deg. F: -40 to 250. #6335 3 Ply 240 Tan Diamond Top x Bare Used on steep inclines/declines for package handling Thickness:.390", Weight:.208 lbs. piw. Minimum pulley diameter: 6". Temperature range deg. F: -40 to 200. Recommended fasteners: Clipper #3, Alligator Staple #187. All-State Belting Co. also offers other products for the conveying industry. Pulleys, Rollers and Idlers We offer a complete line of conveyor pulleys, rollers and idlers for a wide variety of They can be supplied in virtually any diameter, wall thickness, length, shaft size or end type. These high quality products are built from stainless steel, aluminum or other special alloys for long lasting, heavyduty use. Channel / Crown Rubber Channel / Crown Rubber reduces vibration and shock to the shaker screen. xtends life of the frame and screen by isolation metal-againstmetal abrasion. The rubber also lowers the noise levels from the impact as materials fall on the screen. Some examples of what types we have to offer: Round Top Hex-Flat Top Modified Round Top Heavy Hex-Flat Top Please contact us for more information on any of the above items. 21

Sheet Rubber #706 1/8" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 1/8". Weight:.070 lbs. piw. Durometer: 60. #710 1/4" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 1/4". Weight:.140 lbs. piw. Durometer: 60. #720 3/8" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 3/8". Weight:.210 lbs. piw. Durometer: 60. #730 1/2" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 1/2" Weight:.270 lbs. piw. Durometer: 60. #740 3/4" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 3/4". Weight:.410 lbs. piw. Durometer: 60. #750 1" Black Skirtboard Used in guiding product on the conveyor belt. Also used for lining chutes, hoppers and troughs. Thickness: 1". Weight:.540 lbs. piw. Durometer: 60. #751 1" Black Plow Blade #752 1-1/2" Black Plow Blade Used for producing snow plow blades. Thickness: 1-1/2". Weight:.820 lbs. piw. Durometer: 60. #755 1/2" Black Wiper Used for producing belt scrapers. Thickness: 1/2". Weight:.270 lbs. piw. Durometer: 80. #756 3/4" Black Wiper Used for producing belt scrapers. Thickness: 3/4". Weight:.410 lbs. piw. Durometer: 80. #757 1" Black Wiper Used for producing belt scrapers. Thickness: 1" Weight:.540 lbs. piw. Durometer: 80. Skirt Board Rubber Conveyor Skirt Board is compounded specially for holding material on conveyor belting without excessive spillage. It has great advantages over wooden boards, chute lining or worn belting. It is slightly softer than conveyor belting, yet stiff enough to properly guide materials being handled. As a result, it greatly reduces wear on belting. Standard and beveled types are available. Provided in 50' rolls. Skirtboard Skirtboard Seal Used for producing snow plow blades. Thickness: 1". Weight:.540 lbs. piw. Durometer: 60. Belt 22

Alligator Alligator Staple Belt Fasteners Bolt Hinged For easy, economical installation and an exceptionally smooth joint, choose Alligator Belt Lacing Fastener System. Steel or stainless lacing is available in continuous lengths to fit any belt width. The hammer-applied splice requires no special installation tools and is ideal for low-volume users with belts up to 1/2" (13mm) thick. The Alligator Ready Set Staple, featuring one-piece fastener strips with preinserted staples, reduces installation time by eliminating the need to handle and load individual staples. The result is a strong splice that resists impact damage, as well as a smooth, unrippled joint that simplifies hinge pin insertion. For belts operating over smaller pulleys - such as in construction equipment and road machinery - Flexco Bolt Hinged fasteners are strong, dependable and easy-to-install. Rivet Hinged Bolt Solid Plate Rivet Solid Plate Designed for rubber plied and PVC solid woven belting, and for worn belts unfit for vulcanized splices, the Flexco SR Scalloped dge fastener features a low profile that significantly reduces the fastener's exposure to cleaner blades, skirt rubber, and return idlers. The staggered rivet pattern also provides maximum holding ability by allowing the rivets to pass between the carcass fibers without damaging them. Flexco Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material-handling They can be applied to belts mechanically rated up to 620PIW (105 kn/m), and are commonly used on higher-tension main-haulage belts used for highly abrasive materials such as sand, gravel, and crushed stone, as well as coal, cement and salt. The heavy-duty Rivet Solid Plate Fastener System is recommended for the most demanding high-tension The staggered, multiple-point attachment delivers long-lasting holding ability for mechanical ratings up to 800 PIW (140 kn/m). Products Available From Wire Hooks The double-staggered grip pattern gives Clipper Wire Hooks exceptional holding power without degrading the integrity of the belt carcass. Today's splices also have a very low profile, making them increasingly more compatible with with conveyor components and compliant with the need to reduce operating noise. Choose from a wide selection of wire diameters, leg and point lengths, strip lengths and styles. Mechanical Belt Fasteners Precleaners Primary Secondary Cleaner Accessories Belt Positioners and Trainers Skirt Clamps Pulley Lagging Mechanically Attached Cleats Bondable Cleats Slide Idlers Belt Maintenance Tools 23

Fabrications Chevrons Chevrons of various cross sections enable the conveying of wet and/or loose materials up steep inclines. Prevents or reduces slide back of load. Chevrons can be made closed in the center or open for drainage. Scoop Cleats Scoop cleats are used to increase the product capacity for very steep inclines. Available in white or black; FDA and oilresistance where required. Smooth merge of cleat and belt cover means easy cleaning. Chevrons increase the amount of material moved by quick pick-up of materials at loading point. ndless Vulcanizing A hot vulcanized splice is stronger (and more sanitary) than a mechanical (laced) joint. ndless splicing eliminates fastener pull-out and the tearing of belt due to the catching of metal lacing on the conveyor. Vulcanized splices are particularly important where a mechanical splice is unacceptable due to sanitary food processing requirements where metal lacing can mar the product. ON BIAS ANGL ndless Prepared Belts can be supplied with ends already prepared to desired length but not vulcanized so that the customer may splice endless on the conveyor or drive. liminates the need to disassemble conveyor parts and/or bearings and shafts. PVC Skived Splice An economical splice procedure for light to medium duty Recommended for PVC-150 and lighter for both black and white food handling PVC belting. Suitable for magnetic conveyors. ndless splicing eliminates fastener pull-out and the tearing of belt or lacing due to the catching of the lacing on the conveyor. PVC Finger Splice A proven heavy duty splice procedure for single ply PVC belting. The splice area is the same thickness as the belt and uniformly smooth. ndless splicing eliminates fastener pull-out and the tearing of belt or lacing. Curved Cleats Curved cleats are used to increase product capacity on steep inclines and keep material centered on the belt. V-Guides Notched Available in O-A-B-C-D Sections. Notching enables a v-guided belt to operate on smaller pulley diameters. The v-guide eliminates tracking problems. Other sizes available upon request. Flanges Corrugated Corrugated sidewalls allow for greatly increased bulk haulage capacity and use of smaller pulley diameters on horizontal systems without the need for troughing idlers and skirting. Same increased capacity is achieved for steeply inclined systems when in combination with molded cleats. The scallop or waffle design expands and contracts as it bends around pulleys. 24 Perforated Belts Belt perforation is the art of punching a planned sequence of holes into a belt for a specific application. Often used in vacuum or drying operations, perforated belts are used to allow the flow-through of air. Perforated belts are commonly used in the board & panel industry as pre-compressor belts, in the paper industry for both paper sheeting and magazine inserts, and can be used to hold products precisely in place during conveying.

Fabrications Molded or Bonded Cleats Molded or Bonded Lugs ANY CNTRS ANY CNTRS Rounded tops and smooth merging of cleat and belt cover mean easy cleaning and bacteria-free operation so important in food processing. Also available in "Beefy" cleats. Lug construction features rugged v-belt shapes for impact resistance. Available in A, B and C cross sections (see molded v-guide section below for exact dimensions). Cleats and Lugs can be furnished as follows: 1) Indented in from each edge of belt. 2) Notched for troughing idlers or curved pans. 3) Cut-outs or voids. 4) Cut down to intermediate heights. Molded Flanges Molded V-Guides LIMINATS TRACKING PROBLMS Molded edging prevents the spilling of product off the belt. Free-flowing materials are contained without the need for troughing. Flanged belts may be made endless or conventionally laced. Care must be taken to operate flanged belts on sufficiently large diameter pulleys. Consult factory. 1-1/4" 3/8" 1/2" 5/8" 7/8" 3/16" 5/16" 3/8" 1/2" O-Section A-Section B-Section C-Section D-Section Used wherever service conditions create a belt tracking problem; can be molded to any belt and made endless if desired. Bonded to cover side for flanges. 3/4" Bonded to underside for guide. 25

Rubber Cleated Belt All our rubber cleated belts are "Integrally Molded". This means that an uncured cleat or profile was cured in the press with an uncured virgin belt carcass, to form a one piece "integrally molded" belt construction. Various belt widths and cleat dimensions are available. Other cleat configurations available upon request. Titan Hercules-Solid Hercules-Split Mega-Bite Roof Gravel Vee-Cleat Open Bull Horn Small Open Bullhorn Tract-R-Tread Closed Y Open Y Open Chevron 26

Pulley Lagging Slide Lagging xclusive elastomer compounding provides a lagging pad with exceptional drive-pulley traction, abuse resistance and extra long service life. The elastomer retains its integrity under the most severe operation conditions. Factory hot-vulcanization under pressure assures the best possible bond of rubber to backing plate. No lagging failures from loss of adhesion and separation, the most common problems associated with conventional lagging. Steel backing plates are precision formed at the factory to fit the curved surface provided by each individual pulley diameter. Insures proper pad stability and long life. Rust-resistance metal retainers are permanently welded or bolted to the pulley face to securely hold the lagging pads in place. When properly installed, lagging cannot shift or pull free from the effects of impact, trapped material or belt or product movement. Traction pads can be used with or without retainers and is ideal for mining, crushed stone, sand and gravel, cement, agriculture, food processing, coal mining, power plants, feed and grain, and general industry. Available custom made per pulley diameter or formable. Rough Top Pulley Lagging Available for sheet wrap or spiral wrap method of lagging. This rugged material is constructed of a 3/32" type D top cover and a friction surface bottom cover. The carcass is a 2-ply or 3-ply 28 oz. duck. This type of lagging is both easy to install and economical. Pulley lagging gasket adhesive also available in quarts. One quart will cover approximately 91 square feet. SHT WRAP MTHOD OF APPLYING LAGGING SPIRAL WRAP MTHOD OF APPLYING LAGGING To determine the amount of spiral wrap needed for a pulley, the following equation is for 2" width: L = Length of strip C = Pulley circumference W = Pulley width L = C x W + C 2 27

levator Buckets Styles Available: Polyethylene Low Profile Polyethylene Urethane Steel Seamless Steel Fabricated Steel Iron Nylon Bottomless levator Bolts Styles Available: No. 1 Norway Sabre-Tooth Carbon Steel Stainless Steel Zinc Plated Sizes Available (in inches): 1/4 x 3/4 1/4 x 1 1/4 x 1-1/4 1/4 x 1-1/2 1/4 x 1-3/4 1/4 x 2 5/16 x 3/4 5/16 x 1 5/16 x 1-1/4 5/16 x 1-1/2 5/16 x 1-3/4 5/16 x 2 Other sizes available upon request. Nuts and Washers Nuts: Standard Hex Standard Flange Large Flange Nylon Insert Lock Square Washers: Flat Split Ring Lock xternal Tooth Lock Fender Leather Sizes Available (in inches): 1/4 5/16 Other sizes available upon request. levator Belt Fasteners Maxi-Splice AB: Non-ferrous metal of very high tensile strength Usable on belts up to 1200 PIW tensile Non-sparking, noncorroding and non-rusting Bronze color Maxi-Splice CI: Ferrous metal of very high tensile strength Usable on belts up to 600 PIW tensile Silver color Dura-Clamp: Solid aluminum Lighter applications Usable on belts up to 200 PIW tensile Maxi-Splice 28 Dura-Clamp

Common Name Butyl Natural Rubber Neoprene Nitrile/Buna-N PVC SBR Teflon Urethane Key: Abrasion Resistance G G- G G NR Chemical Resistance G G G G G F Work Formulas Properties of Belt Cover Compounds Cold Resistance G G F-G F VG Heat Resistance F VG G F F-G VG Ozone Sunlight Resistance F VG F F VG Petroleum Oil Resistance NR NR G G- G NR VG Solvent Resistance F-G NR NR F G NR NR Vegetable Oil-Animal Fat Resistance NR G VG F VG Weather Resistance = xcellent VG = Very Good G=Good F=Fair NR=Not Recommended F F-G F Many considerations and factors determine the selection of the best belt for the job. The following information will aid you in this process. Assistance is available. Key To Symbols = Sine of Angle of Incline C = Center to Center Distance (in inches) D = Diameter Drive Pulley (in inches) d = Diameter Tail Pulley (in inches) = ffective Tension (in lbs.) 1 = Slack Side Tension (lbs.) 2 = Tight Side Tension (lbs.) F G1 G2 HP K L = Coefficient of Friction (see table #1) = Load per sq. or cu. ft. (in lbs.) = Load per Hour (in lbs.) = Horsepower = Drive Factor (table No. 2) = Belt Length (in inches) M = Belt Weight (overall length, not c/c) P = Product Weight (in lbs.) RPM = Revolutions per Minute S = Speed Feet per Minute (FPM) T = Operating Tension PIW (in lbs.) W = Belt Width (in inches) Belt Length When pulleys are approximately the same size: L = D + d x 3.1416 + 2C 2 When one pulley is much larger than other: (at least 3 or more times larger) Belt Speed in Feet Per Minute S = D x RPM x.2618 x 1.021 Maximum Product Weight on Belt at Any One Time When load is known per square foot: P = G1 x C (in ft.) x W (in ft.) When load is known by lbs. per hour: L = D + d x 3.1416 + 2C + (D - d) 2 G2 P = x C (in ft.) 2 4C S x 60 (minutes) Horsepower to Drive a Belt Conveyor For LVL conveyors: HP = F x S x (P + M) 33,000 For INCLIND conveyors: (P x B) + (P + M) x F x S HP = 33,000 ffective Tension (pull needed to move belt and load horizontally) = F x (P + M) Slack Side Tension (additional tension required to prevent slippage on drive pulley) 1 = x K Tight Side Tension (total tension to move belt and load horizontally) 2 = + 1 Operating Tension (determines working strength of belt to handle job on per inch width basis) T = 2 W TABL #1 COFFICINT OF FRICTION ( Belt to slider bed or rollers) Belt FS pulley side Bare Duck or BB Side Cover on pulley side Steel or Aluminum.30 to.35.20 to.25.50 to.55 Metal Rollers.10 to.15.10 to.15.10 to.15 Belt Wrap On Drive Pulley Screw Take up Bare Lagged TABL #2 DRIV FACTOR "K" Gravity or Weighted Take-Up Bare Lagged 180 o 1.6 1.0.84.50 220 o 1.2 0.6.62.35 240 o 1.0 0.5.54.30 Calculating length of a roll of belting How to calculate the approximate length of a roll of belting. Add together the diameter of the roll and the diameter of the hole in inches and divide the result by 2. Multiply by 3.14 and by the number of coils in the roll. This gives the length in inches. Divide by 12 and you will have the approximate number of feet in the roll. 29

ngineered Plastics The ngineered Plastics Division of All-State Belting provides components machined from a wide variety of high performance plastic materials. Milling, turning, routing and sawing are done on state-of-the-art CNC equipment. Our focus is on wear applications such as bushings, slide pads and gears. We provide the technical assistance you need for material selection and part design parameters. Prototypes or production runs, basic or exotic materials, old parts or new designs, All-State Belting provides solutions for your plastic requirements. Urethane Urethane is a high performance elastomer that offers superior performance and wear characteristics. The properties of urethane make it a top choice for demanding Urethane solutions are about specifying the correct material for each job. Our engineered elastomers are designed and formulated with our customers in mind. We listen so we can deliver the right answers for your applications through formulations, part design, prototypes, testing, quality and service. All-State Belting's automated dispensing capabilities and controlled processes allow us to mold one part or many, small parts or large. In any combination, we can make what you need. Rubber Products We have been experts in the belting business for more than 25 years, but we also have a variety of rubber products and services to offer. And just like our belting, you can trust us to deliver the same great quality and service for any of your industry needs. We are committed to doing whatever it takes to achieve the very best quality, service and delivery at a competitive price. Whether it's die-cut, molded, extruded or one of the value-added services we offer, you have our promise to provide you with the best. Our extensive inventory, technical assistance, and state-of-the-art equipment like water jet cutters, automated presses and laminators, allows us to deliver on our commitment. 30

The All-State Belting Company Mission To be the most used supplier of conveyor and elevator belting in our markets. To do a better job at what we do than anyone else does. To enjoy our jobs and have fun doing what we do. 15 Common Sense Ways To Accomplish Our Mission Never win an argument with any of our customers. Know our products and our customers. Focus on existing customers first. It takes 10 times the effort to get a new customer than to keep an existing one. Do not focus on what we've lost from the past, but how we can use our present strengths to gain in the future. Follow promise with performance. Don't make promises we can't keep. Sweat the details. Slipshod work brings slipshod results. Always be truthful and ethical. Always respond to problems immediately. Work and communicate together to accomplish our objectives. Ask for help when you need it. Share both the good news and the bad. Admit your mistakes and avoid surprises. Commit to giving the company good value for its money. Take personal responsibility for your job and your company. very job is a self-portrait of the person who did it. Consistently exceed our customers' expectations. Go home tired. 31