Savant Systems LLC Technical Application Note How to Guide: HVAC Scheduling Setup Technical Description: This document describes how to schedule HVAC services. The HVAC Schedule allows the end user to establish and control their HVAC system using an interactive scheduling system. Using the HVAC Schedule on your ipad, you can enter heating, cooling, humidifying and dehumidifying times for the day, week, season and vacation. RacePoint Blueprint Particulars HVAC Data Tables HVAC Main Screen To begin the HVAC Schedule process, access the HVAC main screen as shown below. Access Schedules 1. Locate the Schedule icon and schedule setup icon above it at the lower right of the screen as shown below. 2. To view the provided schedules, tap on the Schedule icon. As shown in the example screens below, the popover allows you to do the following: Activate Schedules
To activate a schedule in a zone or all the schedules in all zones refer to the screen below and do the following: Activating a Schedule Under Activate for This Zone tap on Summer, Vacation or Winter for the zone shown (Living Room in this example). Activating All Schedules Under Activate for All Zones tap on Summer, Vacation or Winter for all zones. Deactivate Schedules To disable a schedule in a zone or all the schedules in all zones refer to the screen below and do the following: Deactivating a Schedule Under Deactivate tap on This Zone to disable scheduling for this zone (Living Room in this example).
Note: If this schedule exists in another zone, you must access that zone and repeat the above step. Deactivating All Schedules Under Deactivate tap on All Zones to disable scheduling for all zones. Important: The following screen appears when you selected to disable all schedules.
HVAC Schedule Process To begin the HVAC schedule process, you can select either the Summer, Vacation, Winter schedule or add a new schedule. Add a Schedule 1. To add a schedule, tap on the icon just above Schedule on the HVAC main screen or tap on Settings > Schedule. 2. Tap on Schedule at the lower center of the screen to open the screen below. 3. Tap on the + button in the upper right corner to add a new schedule.
4. After tapping the + button, the following popover displays. 5. In the Name field, tap Enter Text.
6. After tapping on Enter Text the following screen displays. 7. Type in Working Nights as the new schedule name and then tap on Save.
8. After tapping on Save the following popover displays. 9. Tap on Done and then tap on Working Nights.
10. After tapping on Done the following screens show the Working Nights schedule.
Editing a Schedule After selecting the schedule, Summer for example, you can edit the schedule. The Summer selection appears in the Schedule icon as shown below. Editing the schedule may involve changing the schedule day, changing schedule set points and adding and deleting set points. 1. To edit schedules, tap on the icon just above Schedule on the HVAC main screen or tap on Settings > Schedule. 2. The Temperature (default) graph setup screen opens. Note: If you want to edit Humidity schedules, tap on Graphs at the lower middle of the screen and select Humidity. Refer to Scheduling Humidity below.
Changing Schedule Days 1. To change the day for a temperature or humidity schedule, tap on Days at the lower center of the screen. As shown below, this popover allows you to select your desired day. 2. After tapping on the desired day. The following screen displays showing the selected day in the schedule (Thursday in this example).
Changing Set Points 1. As shown on the screens below, touch and drag the set points to schedule your heating and cooling to turn on and off based on temperatures and time of day.
Zooming on Set Points If you need greater accuracy when positioning the set points, use a pinching motion on the graph to zoom in. When you have completed set point positioning, use a pinching motion to zoom out.
Adding and Deleting Set Points To add and delete temperature and humidity set points (temperature set points in this example), do the following: Adding To add set points to the schedule graph, tap on the + sign (goes blue) and then tap the display in the graph area. The + sign goes black after the action is completed.
Deleting To delete set points to the schedule graph, tap on the - sign (goes blue) and then tap the desired set point. The - sign goes black after the action is completed.
Scheduling Humidity 1. To schedule your humidity control device, tap on Graphs at the lower center of the screen. As shown below, this screen allows you to select Humidity.
2. After selecting Humidity, the example screen opens. 3. Touch and drag the set points to schedule your humidity control device to turn on and off based on humidity and time of day.
Copying Schedules 1. After scheduling the temperature and humidity events, you may want to copy these schedules to all days of a week, weekdays, specific days and weekends. 2. To schedule your days, tap on Copy at the lower center of the screen. As shown below, this screen allows you to select the days you want to copy the schedule to.
Important Notice Disclaimer The contents of this document are subject to change without notice; therefore, the information presented herein shall not be construed as a commitment or warranty. Savant Systems LLC shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material. Patents Certain equipment and software described in this document is protected by issued and pending U.S. and foreign patents. All products and services are trademarks or registered trademarks of their respective manufacturer. Copyright This document contains confidential and proprietary information protected by copyright. All rights reserved. Copying or other reproduction of all or parts of this document is prohibited without the permission of Savant Systems.