OPEN ENROLLMENT CUSTOMER TRAINING SCHEDULE APRIL - SEPTEMBER 2015

Similar documents

Thu, Aug 13, 2015 Fri, Aug 14, 2015 Apex, NC Electric Supply & Equipment - Apex, NC $1, $1,280.00

Location Classroom Tuition

Location Classroom Tuition

Department of Veterans Affairs Quarterly Notice to Congress on Data Breaches Third Quarter of Fiscal Year 2015 April 1, 2015 through June 30, 2015

The MetLife Market Survey of Assisted Living Costs

2015 U.S. TOURISM QUALITY PERFORMANCE REPORT RESONANCE REPORT

ANGELOUECONOMICS 2012 INDUSTRY HOTSPOTS

The MetLife Market Survey of Nursing Home & Home Care Costs

U.S. Department of Housing and Urban Development: Weekly Progress Report on Recovery Act Spending

2012 Operating Company Technical Service Training Schedules

Alabama Commission of Higher Education P. O. Box Montgomery, AL. Alabama

U.S. Department of Veterans Affairs: 2015 TCF List of Locations for VA Careers

How To Rate Plan On A Credit Card With A Credit Union

APPENDIX B. STATE AGENCY ADDRESSES FOR INTERSTATE UIB CLAIMS

Physical Therapy Marketing Success :: physical therapy assistant schools usa

New York Public School Spending In Perspec7ve

Ethernet Access (Formerly Converged Ethernet Access) Operations Manual

National Electric Rate Survey

NHIS State Health insurance data

AXA Advisors Retail Distribution Overview. September 23, 2004

Federation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: Continuing Competence

The MetLife Market Survey of Nursing Home & Assisted Living Costs

The Lincoln National Life Insurance Company Variable Life Portfolio

State Insurance Information

State Corporate Income Tax-Calculation

NURSING STATE REGULATORY AUTHORITIES Contact the National Council of State Boards of Nursing at

NAAUSA Security Survey

AT&T Device Support Center Holiday Operating Hours (November/December)

Federation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: Continuing Competence

States Served. CDFI Fund 601 Thirteenth Street, NW, Suite 200, South, Washington, DC (202)

Standardized Pharmacy Technician Education and Training

2016 CAA WEEKLY TELEVISION CLEARANCE

TITLE POLICY ENDORSEMENTS BY STATE

Number of Liver Transplants Performed Updated October 2005

Physical Therapy Marketing Success :: physical therapy assistant schools usa

AZ State Board of Physical Therapy, 1400 W Washington, Suite 230, Phoenix, AZ 85007, Phone: Fax:

Regional Electricity Forecasting

PIH FMD New Project Status Report

Physical Therapy Marketing Success :: physical therapy assistant schools usa

State Vocational Rehabilitation (VR) Agencies

University of Saint Joseph College of Pharmacy

List of HUD Accepted Insured Ten-Year Protection Plans (As of September 22, 2008) Posted as a courtesy by MSI on 11/05/08

Forethought Medicare Supplement and ForeLife Final Expense Life Insurance Phase 1

Physical Therapy Marketing Success :: physical therapy assistant schools usa

Federation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: PTA Supervision Requirements

Department of Business and Information Technology

Department of Banking and Finance

More details >>> HERE <<<

CINCINNATI HILLS CHRISTIAN ACADEMY COLLEGE QUESTIONNAIRE FOR STUDENTS

ANTHONY P. CARNEVALE NICOLE SMITH JEFF STROHL

A B C D E. Boston MA NA Environmental Health (MPH; PhD) Environmental/Occupational Health and Safety (BS) Environmental & Occupational Health (BS);

CDFI FUND NEW MARKETS TAX CREDIT PROGRAM:

2016 Individual Exchange Premiums updated November 4, 2015

IRS ISSUES FINAL REGULATIONS FOR COMPARATIVE EFFECTIVENESS RESEARCH FEES

Preapproval Inspections for Manufacturing. Christy Foreman Deputy Director Division of Enforcement B Office of Compliance/CDRH

ANTI FRAUD BUREAUS ALASKA ARKANSAS ARIZONA CALIFORNIA

Dashboard. Campaign for Action. Welcome to the Future of Nursing:

Table 12: Availability Of Workers Compensation Insurance Through Homeowner s Insurance By Jurisdiction

MLGW s Average Residential Utility Bill Ranks the Lowest

Tax Rates and Tax Burdens In The District of Columbia - A Nationwide Comparison

APPENDIX 1: SURVEY. Copyright 2010 Major, Lindsey & Africa, LLC. All rights reserved.

ANALYSIS OF US AND STATE-BY-STATE CARBON DIOXIDE EMISSIONS AND POTENTIAL SAVINGS IN FUTURE GLOBAL TEMPERATURE AND GLOBAL SEA LEVEL RISE

Jan Dec 2016 Training Schedule

PEER Analysis of OSHA Recordkeeping Inspections Done Pursuant to its National Emphasis Program (NEP)(10/09-8/10) SUMMARY OF DATA

Alabama Department of Postsecondary Education Private School Licensure Division P.O. Box Montgomery, AL

ehealth Price Index Trends and Costs in the Short-Term Health Insurance Market, 2013 and 2014

The following rates are the maximum rates that should be illustrated. Be sure to update the IRIS illustration system

STATE INCOME TAX WITHHOLDING INFORMATION DOCUMENT

Atlanta Rankings 2014

AN INSIDE LOOK AT SOCIAL RECRUITING IN THE USA

Masters of Science in Finance Online Degree Program Updated February 5, 2014.

University of Alabama School of Medicine 2016 Match Results by PGY1 Location

Additional information >>> HERE <<< Physical Therapy Marketing Success :: physical therapy assistant schools usa

Federation of State Boards of Physical Therapy Jurisdiction Licensure Reference Guide Topic: License Renewal Who approves courses?

PRODUCTS CURRENTLY AVAILABLE FOR SALE. Marquis SP

National Bureau for Academic Accreditation And Education Quality Assurance

In Utilization and Trend In Quality

National Bureau for Academic Accreditation And Education Quality Assurance PUBLIC HEALTH

LexisNexis Law Firm Billable Hours Survey Top Line Report. June 11, 2012

Blind Rehabilitation

2010 Utility Bill Comparisons for Selected U.S. Cities

Physical Therapy Marketing Success :: physical therapy assistant schools usa

Notices of Cancellation / Nonrenewal and / or Other Related Forms

ENS Governmental Format Status (As of 06/16/2008)

The Most Affordable Cities For Individuals to Buy Health Insurance

Florida Workers Comp Market

State Annual Report Due Dates for Business Entities page 1 of 10

Enrollment Snapshot of Radiography, Radiation Therapy and Nuclear Medicine Technology Programs 2014

Initial Accreditation

State-by-State Listing of Departments of Insurance Updated August 2005

Workforce Development Catalog. Creating a plan to fill workforce skill gaps

List of low tuition universities in the USA. 1. Louisiana Tech University, LA Total Cost to. International Students: $17,472

Surety Bond Requirements for Mortgage Brokers and Mortgage Bankers As of July 15, 2011

Median, all 176 cities 21.1%

Standardization of Technician Education Want it? Need it? Janet Teeters, M.S., R.Ph. Director of Accreditation Services ASHP

Additional information >>> HERE <<< Physical Therapy Marketing Success :: physical therapy assistant schools usa

Tax Rates and Tax Burdens in the District of Columbia - A Nationwide Comparison. Government of the District of Columbia. Vincent C.

Transcription:

APRIL - SEPTEMBER 2015 Week of: April 27, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 4/28/2015 4/29/2015 Texarcana, TX Stuart C Irby - Texarcana, TX CCN130 Motion Control Fundamentals 2.0 $1,240.00 4/28/2015 4/29/2015 San Ramon, CA Rockwell Automation - San Ramon, CA CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 4/28/2015 5/1/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 4/28/2015 5/1/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 4/28/2015 4/29/2015 Tampa, FL Rockwell Automation - Tampa, FL 4/28/2015 4/29/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 4/30/2015 5/1/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 4/30/2015 5/1/2015 Tampa, FL Rockwell Automation - Tampa, FL

CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 4/28/2015 5/1/2015 Vancouver, WA Consolidated Electrical - Vancouver, WA 4/28/2015 5/1/2015 Cincinnati, OH Cincinnati State - Cincinnati, OH 4/28/2015 5/1/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 4/28/2015 5/1/2015 Augusta, GA Englewood Electrical - Augusta, GA 4/28/2015 5/1/2015 Jackson, TN Kendall Electric - Jackson, TN CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 4/28/2015 4/29/2015 Odessa, TX Reynolds Company - Odessa, TX CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 4/28/2015 4/28/2015 Centralia, WA Hotel Venue 4/30/2015 4/30/2015 Springboro, OH CBT Company - Springboro, OH CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 4/27/2015 5/1/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 4/27/2015 5/1/2015 Rocky Hill, CT HESCO - Rocky Hill, CT 4/27/2015 5/1/2015 City of Industry, CA B & K Electric - City of Industry, CA 4/27/2015 5/1/2015 Bakersfield, CA California Electric - Bakersfield, CA 4/28/2015 5/1/2015 Moses Lake, WA Hotel Venue

CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 4/28/2015 5/1/2015 Sidney, OH FDL Automation - Sidney, OH CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 4/27/2015 5/1/2015 Pittston, PA Rexel - Pittston, PA EM-206 Electrical Troubleshooting 5.0 $2,490.00 4/27/2015 5/1/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 FTVP FactoryTalk VantagePoint Configuration and Reporting 3.0 $1,650.00 4/28/2015 4/30/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 4/27/2015 5/1/2015 Little Rock, AR Rockwell Automation - Little Rock, AR-Rm 1 4/27/2015 5/1/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 4/27/2015 5/1/2015 Greensboro, NC Electric Supply & Equipment - Greensboro, NC Week of: May 4, 2015 coursecode coursetitle Duration Tuition

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 5/5/2015 5/6/2015 Chatsworth, CA Royal Wholesale Electric - Chatsworth, CA CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 5/5/2015 5/6/2015 Richmond, VA Rockwell Automation - Richmond, VA CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 5/5/2015 5/8/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 5/5/2015 5/8/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 5/5/2015 5/8/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A 5/5/2015 5/8/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 5/5/2015 5/6/2015 Fresno, CA Allied Electric - Fresno, CA 5/5/2015 5/6/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 5/7/2015 5/8/2015 Fresno, CA Allied Electric - Fresno, CA 5/7/2015 5/8/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1

CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 5/5/2015 5/6/2015 Apex, NC Electric Supply & Equipment - Apex, NC CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 5/5/2015 5/8/2015 Racine, WI Nelson Electric Supply - Racine, WI CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 5/6/2015 5/7/2015 Moses Lake, WA Hotel Venue CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 5/5/2015 5/5/2015 Birmingham, AL Kendall Electric - Birmingham, AL CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 5/4/2015 5/8/2015 Alexandria, LA Rexel - Alexandria, LA 5/4/2015 5/8/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 5/4/2015 5/8/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO 5/4/2015 5/8/2015 Duluth, MN Mielke Electric (Garfield Ave.) - Duluth, MN 5/4/2015 5/8/2015 Mt Vernon, IL Kirby Risk Electrical - Mt Vernon IL

CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 5/5/2015 5/8/2015 San Antonio, TX Mid-Coast Electric - San Antonio, TX CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 5/5/2015 5/8/2015 Youngstown, OH Winkle Electric - Youngstown, OH 5/5/2015 5/8/2015 Joplin, MO SMC - Joplin, MO CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 5/4/2015 5/8/2015 Modesto, CA Rexel - Modesto, CA IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 5/4/2015 5/8/2015 Neenah, WI Werner Electric - Neenah, WI 5/4/2015 5/8/2015 Roseville, MN Rockwell Automation - Roseville,MN-Demo 5/4/2015 5/8/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH M850P Micro850 Programming 2.0 $1,240.00 5/5/2015 5/6/2015 Conshohocken, PA Rumsey Electric - Conshohocken, PA PRS010 PID Loop Development and Tuning 1.0 $836.00 5/7/2015 5/7/2015 Apex, NC Electric Supply & Equipment - Apex, NC

SAF-TUV1 Functional Safety for Machinery Introduction (TÜV Rheinland) 3.0 $1,590.00 5/5/2015 5/7/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI Week of: May 11, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 5/12/2015 5/13/2015 Harahan, LA Reynolds Company - Harahan, LA 5/12/2015 5/13/2015 Kingsport, TN Kendall Electric - Kingsport, TN CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 5/12/2015 5/13/2015 Owensboro, KY Consolidated Electrical - Owensboro, KY 5/14/2015 5/15/2015 Harahan, LA Reynolds Company - Harahan, LA 5/14/2015 5/15/2015 Kingsport, TN Kendall Electric - Kingsport, TN CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 5/12/2015 5/13/2015 Cottage Grove, MN Werner Electric - Cottage Grove, MN 5/12/2015 5/13/2015 Lubbock, TX Rexel - Lubbock, TX 5/14/2015 5/15/2015 Ogden, UT Codale Electric Supply - Ogden, UT

CCN130 Motion Control Fundamentals 2.0 $1,240.00 5/14/2015 5/15/2015 Holland, MI Kendall Electric - Holland, MI CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 5/12/2015 5/13/2015 San Leandro, CA Royal Wholesale Electric - San Leandro, CA 5/14/2015 5/15/2015 LaVergne, TN Stuart C Irby - LaVergne, TN CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 5/12/2015 5/15/2015 Tampa, FL Rockwell Automation - Tampa, FL 5/12/2015 5/15/2015 State College, PA Schaedler Yesco - State College, PA 5/12/2015 5/15/2015 Chatsworth, CA Royal Wholesale Electric - Chatsworth, CA 5/12/2015 5/15/2015 Farmington, NM Border States Electric - Farmington, NM CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 5/12/2015 5/13/2015 Ogden, UT Codale Electric Supply - Ogden, UT 5/12/2015 5/13/2015 Maumee, OH McNaughton-McKay - Maumee, OH 5/12/2015 5/13/2015 Bluffton, IN Wabash Electric Supply - Bluffton, IN 5/12/2015 5/13/2015 Linden, NJ Turtle & Hughes - Linden, NJ 5/12/2015 5/13/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY 5/12/2015 5/13/2015 Casper, WY Rexel - Casper, WY 5/14/2015 5/15/2015 Denver, CO Rexel - Denver, CO

CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 5/12/2015 5/13/2015 Savannah, GA McNaughton-McKay - Savannah, GA 5/14/2015 5/15/2015 Bluffton, IN Wabash Electric Supply - Bluffton, IN 5/14/2015 5/15/2015 Linden, NJ Turtle & Hughes - Linden, NJ 5/14/2015 5/15/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY 5/14/2015 5/15/2015 Savannah, GA McNaughton-McKay - Savannah, GA CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 5/12/2015 5/15/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV 5/12/2015 5/15/2015 Texarcana, TX Stuart C Irby - Texarcana, TX CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 5/12/2015 5/13/2015 Sacramento, CA Rexel - Sacramento, CA CCP177 NetLinx System Maintenance and Troubleshooting 4.0 $2,490.00 5/12/2015 5/15/2015 Fayetteville, NC Kiwanis Recreation Center - Fayetteville, NC CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 5/13/2015 5/14/2015 Asheville, NC Rexel - Asheville, NC

CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 5/12/2015 5/12/2015 Omaha, NE Consolidated Electrical - Omaha, NE 5/12/2015 5/12/2015 Asheville, NC Rexel - Asheville, NC 5/14/2015 5/14/2015 Columbus, OH McNaughton-McKay - Columbus, OH CCP800 Introduction to Automation 3.0 $1,350.00 5/12/2015 5/14/2015 Sandusky, OH Brohl & Appell - Sandusky, OH CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 5/12/2015 5/15/2015 Cincinnati, OH Cincinnati State - Cincinnati, OH 5/12/2015 5/15/2015 Dickinson, ND Border States Electric - Dickinson, ND CCPS42 SLC 500 & RSLogix 500 Advanced Programming 4.0 $2,070.00 5/12/2015 5/15/2015 Bakersfield, CA California Electric - Bakersfield, CA CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 5/12/2015 5/15/2015 Richmond, VA Rockwell Automation - Richmond, VA CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 5/12/2015 5/15/2015 Brockton, MA NorthEast Electrical - Brockton, MA

CCV205 FactoryTalk View SE Architecture 2.0 $1,240.00 5/12/2015 5/13/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCV206 FactoryTalk View SE Maintenance and Troubleshooting 2.0 $1,240.00 5/14/2015 5/15/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 ILEAD-012 LEVEL 1: FOUNDATIONAL SKILLS 4.0 $2,070.00 5/12/2015 5/15/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 5/11/2015 5/15/2015 Englewood, CO Rockwell Automation - Englewood, CO 5/11/2015 5/15/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 5/12/2015 5/15/2015 Moses Lake, WA Best Western - Moses Lake, WA SAF-TUV2 Functional Safety for Machinery Engineer Certification (TÜV Rheinland) 4.0 $3,080.00 5/11/2015 5/14/2015 Harrisonburg, VA Williams Supply - Harrisonburg, VA Week of: May 18, 2015 coursecode coursetitle Duration Tuition

CAN7000 PowerFLEX 7000~ Medium Voltage Drive OPERATION AND Maintenance 3.5 $3,800.00 5/19/2015 5/22/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH CCA161 PowerFlex 700 Vector Control Configuration & Startup 1.0 $828.00 5/19/2015 5/19/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 5/20/2015 5/20/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 5/19/2015 5/20/2015 Mobile, AL Stuart C Irby - Mobile, AL 5/19/2015 5/20/2015 Sedalia, MO SMC - Sedalia, MO CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 5/19/2015 5/20/2015 LaGrange, GA Consolidated Electrical - LaGrange, GA 5/19/2015 5/20/2015 Hammond, IN Englewood Electrical - Hammond, IN 5/21/2015 5/22/2015 Mobile, AL Stuart C Irby - Mobile, AL 5/21/2015 5/22/2015 Sedalia, MO SMC - Sedalia, MO

CCN130 Motion Control Fundamentals 2.0 $1,240.00 5/19/2015 5/20/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 5/19/2015 5/22/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 5/19/2015 5/22/2015 Fresno, CA Allied Electric - Fresno, CA CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 5/19/2015 5/20/2015 Norristown, PA Rockwell Automation - Norristown, PA 5/19/2015 5/20/2015 Pittsburgh, PA CED Mosebach - Pittsburgh, PA 5/19/2015 5/20/2015 Bowling Green, KY Consolidated Electrical - Bowling Green, KY 5/19/2015 5/20/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 5/21/2015 5/22/2015 Memphis, TN IAC Electrical Equipment and Supplies - Memphis, 5/21/2015 5/22/2015 Norristown, PA Rockwell Automation - Norristown, PA 5/21/2015 5/22/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 5/19/2015 5/20/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV

CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 5/19/2015 5/22/2015 Tucson, AZ Border States Electric - Tucson, AZ 5/19/2015 5/22/2015 Tuscaloosa, AL Kendall Electric - Tuscaloosa, AL 5/19/2015 5/22/2015 Casper, WY Rexel - Casper, WY CCP164 DeviceNet and RSNetWorx Configuration and Troubleshooting 3.0 $1,650.00 5/19/2015 5/21/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 5/19/2015 5/21/2015 Vernon, CA Royal Wholesale Electric - Vernon, CA CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 5/19/2015 5/20/2015 Charleston, SC McNaughton-McKay - Charleston, SC 5/20/2015 5/21/2015 Jackson, MS Stuart C Irby - Jackson, MS 5/20/2015 5/21/2015 Macon, GA Englewood Electrical - Macon, GA CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 5/19/2015 5/19/2015 Jackson, MS Stuart C Irby - Jackson, MS 5/19/2015 5/19/2015 Macon, GA Englewood Electrical - Macon, GA CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 5/18/2015 5/22/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE

CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 5/18/2015 5/22/2015 Karnes City, TX Mid-Coast Electric - Karnes City, TX 5/18/2015 5/22/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 5/18/2015 5/22/2015 Cary, NC Rockwell Automation - Cary, NC 5/18/2015 5/22/2015 Sidney, OH FDL Automation - Sidney, OH 5/18/2015 5/22/2015 El Paso, TX Border States Electric - El Paso, TX 5/18/2015 5/22/2015 Evansville, IN Consolidated Electrical - Evansville, IN 5/18/2015 5/22/2015 Lexington, KY Consolidated Electrical - Lexington, KY 5/18/2015 5/22/2015 Columbus, MS Stuart C Irby - Columbus, MS 5/18/2015 5/22/2015 Joplin, MO SMC - Joplin, MO 5/18/2015 5/22/2015 Knoxville, TN Kendall Electric - Knoxville, TN 5/18/2015 5/22/2015 Grand Junction, CO Rexel - Grand Junction, CO CCP800 Introduction to Automation 3.0 $1,350.00 5/19/2015 5/21/2015 Rancho Cucamonga, CA Royal Wholesale Electric - Rancho Cucamonga, CA CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 5/19/2015 5/22/2015 Richmond, VA Rockwell Automation - Richmond, VA CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 5/19/2015 5/22/2015 Cincinnati, OH Cincinnati State - Cincinnati, OH

CCV201 RSView32 Project Development 4.5 $2,490.00 5/18/2015 5/22/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 5/19/2015 5/22/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 5/19/2015 5/22/2015 Dickinson, ND Border States Electric - Dickinson, ND 5/19/2015 5/22/2015 Springboro, OH CBT Company - Springboro, OH CCV206 FactoryTalk View SE Maintenance and Troubleshooting 2.0 $1,240.00 5/21/2015 5/22/2015 Rocky Hill, CT HESCO - Rocky Hill, CT CIA101 Introduction to the Integrated Architecture System 2.0 $1,240.00 5/19/2015 5/20/2015 Scarborough, ME Horizon Solutions - Scarborough, ME ILEAD-013 LEVEL 2: ENHANCED SKILLS 4.0 $2,070.00 5/19/2015 5/22/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 5/18/2015 5/22/2015 Omaha, NE Consolidated Electrical - Omaha, NE 5/18/2015 5/22/2015 Rochester, NY Horizon Solutions - Rochester, NY

5/18/2015 5/22/2015 Jackson, MS Stuart C Irby - Jackson, MS OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 5/18/2015 5/22/2015 Appleton, WI Rockwell Automation - Appleton, WI-Room 1 SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 5/20/2015 5/21/2015 Reading, PA Fromm Electric Supply - Reading, PA SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 5/19/2015 5/19/2015 Reading, PA Fromm Electric Supply - Reading, PA Week of: May 25, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 5/27/2015 5/28/2015 Sidney, OH FDL Automation - Sidney, OH 5/27/2015 5/28/2015 Phoenix, AZ Border States Electric - Phoenix, AZ CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 5/27/2015 5/28/2015 Victoria, TX Mid-Coast Electric - Victoria, TX 5/27/2015 5/28/2015 Bakersfield, CA California Electric - Bakersfield, CA 5/28/2015 5/29/2015 Cheektowaga, NY Rexel - Cheektowaga, NY

CCN130 Motion Control Fundamentals 2.0 $1,240.00 5/27/2015 5/28/2015 Bowling Green, KY Consolidated Electrical - Bowling Green, KY CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 5/27/2015 5/28/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs 5/27/2015 5/28/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm B 5/27/2015 5/28/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 5/27/2015 5/28/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 5/27/2015 5/28/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A CCP173 ControlNet and RSNetWorx Configuration and Troubleshooting 3.0 $2,070.00 5/27/2015 5/29/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 5/27/2015 5/29/2015 Columbus, MS Stuart C Irby - Columbus, MS FTAC FactoryTalk AssetCentre System Design and Implementation 3.0 $1,650.00 5/27/2015 5/29/2015 Englewood, CO Rockwell Automation - Englewood, CO

PRST9063 AADvance Comprehensive System Training 3.0 $1,650.00 5/27/2015 5/29/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 5/27/2015 5/27/2015 Salinas, CA Buckles Smith - Salinas, CA Week of: June 1, 2015 coursecode coursetitle Duration Tuition CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 6/2/2015 6/3/2015 Chatsworth, CA Royal Wholesale Electric - Chatsworth, CA CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 6/2/2015 6/3/2015 Augusta, GA Englewood Electrical - Augusta, GA CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 6/2/2015 6/3/2015 Jacksonville, FL Englewood Electrical - Jacksonville, FL 6/4/2015 6/5/2015 Augusta, GA Englewood Electrical - Augusta, GA CCN130 Motion Control Fundamentals 2.0 $1,240.00 6/2/2015 6/3/2015 Wichita, KS Stanion Wholesale Electric - Wichita, KS

CCN144 Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP) Programming 4.0 $2,070.00 6/2/2015 6/5/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs CCN190 Studio 5000 Logix Designer Level 5: Advanced Motion Programming 2.0 $1,240.00 6/4/2015 6/5/2015 Wichita, KS Stanion Wholesale Electric - Wichita, KS 6/4/2015 6/5/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 6/2/2015 6/3/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 6/2/2015 6/5/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI 6/2/2015 6/5/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY 6/2/2015 6/5/2015 Modesto, CA Rexel - Modesto, CA CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 6/2/2015 6/3/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 6/2/2015 6/3/2015 Vancouver, WA Consolidated Electrical - Vancouver, WA 6/2/2015 6/3/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN 6/2/2015 6/3/2015 Alpena, MI Kendall Electric - Alpena, MI

6/4/2015 6/5/2015 Sandusky, OH Brohl & Appell - Sandusky, OH CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 6/3/2015 6/4/2015 Manchester, NH Horizon Solutions - Manchester, NH 6/4/2015 6/5/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 6/4/2015 6/5/2015 Vancouver, WA Consolidated Electrical - Vancouver, WA 6/4/2015 6/5/2015 Rocky Hill, CT HESCO - Rocky Hill, CT 6/4/2015 6/5/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN 6/4/2015 6/5/2015 Alpena, MI Kendall Electric - Alpena, MI CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 6/2/2015 6/5/2015 Austin, TX Reynolds Company - Austin, TX CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 6/4/2015 6/5/2015 Holyoke, MA Horizon Solutions - Holyoke, MA CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 6/2/2015 6/2/2015 Maryland, MO French Gerleman - Maryland Hts, MO 6/2/2015 6/2/2015 Carrollton, GA McNaughton-McKay - Carrollton, GA 6/3/2015 6/3/2015 Holyoke, MA Horizon Solutions - Holyoke, MA

CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 6/1/2015 6/5/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 6/1/2015 6/5/2015 Springdale, AR Consolidated Electrical - Springdale,AR 6/1/2015 6/5/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A 6/1/2015 6/5/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 6/1/2015 6/5/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 6/1/2015 6/5/2015 Columbia, SC Englewood Electrical - Columbia, SC 6/1/2015 6/5/2015 Maumee, OH McNaughton-McKay - Maumee, OH 6/1/2015 6/5/2015 Panama City, FL Gulf Coast Community College - Panama City, FL CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 6/2/2015 6/5/2015 Greenville, SC McNaughton-McKay - Greenville, SC CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 6/2/2015 6/5/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI 6/2/2015 6/5/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT 6/2/2015 6/5/2015 Linden, NJ Turtle & Hughes - Linden, NJ 6/2/2015 6/5/2015 Denver, CO Rexel - Denver, CO CIA101 Introduction to the Integrated Architecture System 2.0 $1,240.00 6/2/2015 6/3/2015 Traverse City, MI Kendall Electric - Traverse City, MI

EK-ICM301 Vibration Analysis: Level III 3.5 $1,650.00 6/2/2015 6/5/2015 West Chester, OH Rockwell Automation - West Chester, OH EM-204 Motor Controls 5.0 $2,490.00 6/1/2015 6/5/2015 Pittston, PA Rexel - Pittston, PA EM-206 Electrical Troubleshooting 5.0 $2,490.00 6/1/2015 6/5/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 FTM FactoryTalk Metrics Configuration 3.0 $1,650.00 6/2/2015 6/4/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 6/1/2015 6/5/2015 Vancouver, WA 6/1/2015 6/5/2015 Evansville, IN M850P Micro850 Programming 2.0 $1,240.00 6/2/2015 6/3/2015 Huntington, WV State Electric Supply - Huntington, WV

MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 6/1/2015 6/5/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 6/2/2015 6/3/2015 Riverside, CA Royal Wholesale Electric - Riverside, CA SAF-TUV0T Functional Safety for Machinery Technician Certification (TÜV Rheinland) 2.0 $1,800.00 6/3/2015 6/4/2015 Evansville, IN Consolidated Electrical - Evansville, IN Week of: June 8, 2015 coursecode coursetitle Duration Tuition CAN7000 PowerFLEX 7000~ Medium Voltage Drive Operation and Maintenance 3.5 $3,800.00 6/9/2015 6/12/2015 Elmhurst, IL Rockwell Automation Local Solution Center- CAN7000C PowerFlex 7000 and 7000C Medium Voltage Drive Operation and Maintenance 4.0 $4,000.00 6/9/2015 6/12/2015 Elmhurst, IL Rockwell Automation Local Solution Center- CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 6/9/2015 6/10/2015 Joplin, MO SMC - Joplin, MO

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 6/11/2015 6/12/2015 Joplin, MO SMC - Joplin, MO CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 6/11/2015 6/12/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCN130 Motion Control Fundamentals 2.0 $1,240.00 6/9/2015 6/10/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCN190 Studio 5000 Logix Designer Level 5: Advanced Motion Programming 2.0 $1,240.00 6/11/2015 6/12/2015 Greenville, SC McNaughton-McKay - Greenville, SC CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 6/9/2015 6/10/2015 Greenville, SC McNaughton-McKay - Greenville, SC 6/11/2015 6/12/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 6/9/2015 6/12/2015 Guilderland Center, NY Horizon Solutions - Guilderland Center, NY 6/9/2015 6/12/2015 Casper, WY Rexel - Casper, WY

CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 6/9/2015 6/10/2015 Greenville, SC Rockwell Automation - Greenville, SC 6/9/2015 6/10/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 6/9/2015 6/10/2015 Loveland, CO Rexel - Loveland, CO 6/11/2015 6/12/2015 Greenville, SC Rockwell Automation - Greenville, SC CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 6/9/2015 6/12/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A 6/9/2015 6/12/2015 Ogden, UT Codale Electric Supply - Ogden, UT 6/9/2015 6/12/2015 Madison Heights, MI McNaughton-McKay - Madison Heights, MI CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 6/10/2015 6/11/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 6/9/2015 6/9/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1

CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 6/8/2015 6/12/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 6/8/2015 6/12/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 6/8/2015 6/12/2015 Linthicum, MD Rexel - Linthicum, MD 6/8/2015 6/12/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA 6/8/2015 6/12/2015 Dickinson, ND Border States Electric - Dickinson, ND 6/8/2015 6/12/2015 Odessa, TX Reynolds Company - Odessa, TX 6/8/2015 6/12/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH 6/8/2015 6/12/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 6/8/2015 6/12/2015 Phoenix, AZ Border States Electric - Phoenix, AZ 6/8/2015 6/12/2015 Paducah, KY Consolidated Electrical - Paducah, KY 6/8/2015 6/12/2015 Boise, ID Columbia Electric Supply - Boise, ID 6/8/2015 6/12/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN 6/8/2015 6/12/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 6/9/2015 6/12/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 6/8/2015 6/11/2015 Sidney, OH FDL Automation - Sidney, OH 6/9/2015 6/12/2015 Rochester, NY Horizon Solutions - Rochester, NY

6/9/2015 6/12/2015 Dothan, AL Stuart C Irby - Dothan, AL CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 6/9/2015 6/12/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A 6/9/2015 6/12/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 6/8/2015 6/12/2015 Charleston, SC McNaughton-McKay - Charleston, SC CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 6/9/2015 6/10/2015 Florence, SC Englewood Electrical - Florence, SC 6/9/2015 6/10/2015 Scarborough, ME Horizon Solutions - Scarborough, ME EM-101A Basic AC/DC Concepts 5.0 $2,490.00 6/8/2015 6/12/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks EM-206 Electrical Troubleshooting 5.0 $2,490.00 6/8/2015 6/12/2015 Marlboro, MA Rockwell Automation - Marlboro, MA IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 6/8/2015 6/12/2015 Linden, NJ Turtle & Hughes - Linden, NJ

6/8/2015 6/12/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 6/9/2015 6/12/2015 Tupelo, MS Stuart C Irby - Tupelo, MS MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 6/8/2015 6/12/2015 Tampa, FL Rockwell Automation - Tampa, FL OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 6/8/2015 6/12/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 6/9/2015 6/9/2015 Holland, MI Kendall Electric - Holland, MI 6/11/2015 6/11/2015 Alpharetta, GA Englewood Electrical - Alpharetta, GA SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 6/9/2015 6/10/2015 Cheektowaga, NY Rexel - Cheektowaga, NY Week of: June 15, 2015 coursecode coursetitle Duration Tuition

CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 6/16/2015 6/17/2015 Riverside, CA Royal Wholesale Electric - Riverside, CA CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 6/18/2015 6/18/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 6/16/2015 6/17/2015 Moses Lake, WA Best Western - Moses Lake, WA CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 6/16/2015 6/17/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI 6/18/2015 6/19/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH 6/18/2015 6/19/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 6/18/2015 6/19/2015 Scarborough, ME Horizon Solutions - Scarborough, ME CCN130 Motion Control Fundamentals 2.0 $1,240.00 6/16/2015 6/17/2015 Fairfield, CA Rexel - Fairfield, CA CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 6/16/2015 6/19/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT

6/16/2015 6/19/2015 Pittsburgh, PA CED Mosebach - Pittsburgh, PA 6/16/2015 6/19/2015 Columbus, MS Stuart C Irby - Columbus, MS CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 6/16/2015 6/17/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 6/16/2015 6/17/2015 Richmond, VA Rockwell Automation - Richmond, VA 6/16/2015 6/17/2015 Portland, OR Downtown Lloyd Center Marriott 6/16/2015 6/17/2015 Sacramento, CA Rexel - Sacramento, CA 6/16/2015 6/17/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH 6/16/2015 6/17/2015 Linden, NJ Turtle & Hughes - Linden, NJ 6/16/2015 6/17/2015 Elmira, NY Horizon Solutions - Elmira, NY CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 6/16/2015 6/17/2015 St. Cloud, MN Werner Electric - St. Cloud, MN 6/18/2015 6/19/2015 Richmond, VA Rockwell Automation - Richmond, VA 6/18/2015 6/19/2015 Portland, OR Downtown Lloyd Center Marriott 6/18/2015 6/19/2015 Sacramento, CA Rexel - Sacramento, CA CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 6/16/2015 6/17/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1

CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 6/16/2015 6/19/2015 Memphis, TN IAC Electrical Equipment and Supplies - Memphis, 6/16/2015 6/19/2015 Greenville, SC Rockwell Automation - Greenville, SC 6/16/2015 6/19/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO 6/16/2015 6/19/2015 Bowling Green, KY Consolidated Electrical - Bowling Green, KY 6/16/2015 6/19/2015 Rockford, IL Englewood Electrical - Rockford, IL CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 6/18/2015 6/19/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 6/16/2015 6/17/2015 Texarcana, TX Stuart C Irby - Texarcana, TX CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 6/15/2015 6/19/2015 Marlboro, MA Rockwell Automation - Marlboro, MA 6/15/2015 6/19/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 6/15/2015 6/19/2015 Reno, NV Grove Madsen Industries - Reno, NV CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 6/15/2015 6/19/2015 Broken Arrow, OK Rexel - Broken Arrow, OK

6/15/2015 6/19/2015 Oklahoma City, OK Rexel - Oklahoma City, OK 6/15/2015 6/19/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 6/15/2015 6/19/2015 Vernon, CA Royal Wholesale Electric - Vernon, CA 6/15/2015 6/19/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY 6/15/2015 6/19/2015 Lincoln, NE Consolidated Electrical - Lincoln, NE 6/15/2015 6/19/2015 Springdale, AR Consolidated Electrical - Springdale, AR 6/15/2015 6/19/2015 Jacksonville, FL Englewood Electrical - Jacksonville, FL CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 6/16/2015 6/19/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 6/16/2015 6/19/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 6/16/2015 6/19/2015 LaVergne, TN Stuart C Irby - LaVergne, TN CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 6/16/2015 6/19/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Sm Rm 6/16/2015 6/19/2015 Savannah, GA McNaughton-McKay - Savannah, GA 6/16/2015 6/19/2015 Grand Junction, CO Rexel - Grand Junction, CO CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 6/15/2015 6/19/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A

CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 6/18/2015 6/19/2015 Saginaw, MI Kendall Electric - Saginaw, MI CIA101 Introduction to the Integrated Architecture System 2.0 $1,240.00 6/18/2015 6/19/2015 West Monroe, LA Rexel - West Monroe, LA EM-204 Motor Controls 5.0 $2,490.00 6/15/2015 6/19/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks FTVP FactoryTalk VantagePoint Configuration and Reporting 3.0 $1,650.00 6/16/2015 6/18/2015 Englewood, CO Rockwell Automation - Englewood, CO IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 6/15/2015 6/19/2015 Englewood, CO Rockwell Automation - Englewood, CO RS-FTHSEC FactoryTalk Historian SE Configuration and Data Collection 3.5 $2,090.00 6/16/2015 6/19/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 6/16/2015 6/17/2015 Asheville, NC Rexel - Asheville, NC

Week of: June 22, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 6/23/2015 6/24/2015 Carrollton, GA McNaughton-McKay - Carrollton, GA CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 6/23/2015 6/24/2015 Valencia, CA Royal Wholesale Electric - Valencia, CA 6/23/2015 6/24/2015 Lexington, KY Consolidated Electrical - Lexington, KY 6/25/2015 6/26/2015 Carrollton, GA McNaughton-McKay - Carrollton, GA CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 6/25/2015 6/26/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCN130 Motion Control Fundamentals 2.0 $1,240.00 6/23/2015 6/24/2015 Evansville, IN Consolidated Electrical - Evansville, IN CCN142 Studio 5000 Logix Designer Level 4: Kinetix 6000 (SERCOS) Programming 3.0 6/24/2015 6/26/2015 Grand Island, NE Kriz-Davis - Grand Island, NE

CCN144 Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP) Programming 4.0 $2,070.00 6/23/2015 6/26/2015 San Leandro, CA Royal Wholesale Electric - San Leandro, CA CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 6/23/2015 6/24/2015 Macon, GA Englewood Electrical - Macon, GA CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 6/23/2015 6/24/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 6/23/2015 6/26/2015 Greenville, SC Rockwell Automation - Greenville, SC 6/23/2015 6/26/2015 Holland, MI Kendall Electric - Holland, MI 6/23/2015 6/26/2015 Denver, CO Rexel - Denver, CO CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 6/23/2015 6/24/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 6/23/2015 6/24/2015 Pittston, PA Rexel - Pittston, PA CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 6/25/2015 6/26/2015 Columbus, OH McNaughton-McKay - Columbus, OH

CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 6/23/2015 6/24/2015 Odessa, TX Reynolds Company - Odessa, TX CCP164 DeviceNet and RSNetWorx Configuration and Troubleshooting 3.0 $1,650.00 6/23/2015 6/25/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCP177 NetLinx System Maintenance and Troubleshooting 4.0 $2,490.00 6/23/2015 6/26/2015 Duluth, MN Mielke Electric (Garfield Ave.) - Duluth, MN CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 6/24/2015 6/25/2015 Apex, NC Electric Supply & Equipment - Apex, NC CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 6/23/2015 6/23/2015 Apex, NC Electric Supply & Equipment - Apex, NC CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 6/23/2015 6/26/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 6/23/2015 6/26/2015 Commack, NY Mid-Island Electrical Supply - Commack, NY

CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 6/23/2015 6/26/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 6/23/2015 6/26/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 6/23/2015 6/26/2015 Fresno, CA Allied Electric - Fresno, CA ILEAD-013 LEVEL 2: ENHANCED SKILLS 4.0 $2,070.00 6/23/2015 6/26/2015 Maryland Heights, MO Rockwell Automation - Maryland Heights, MO MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 6/23/2015 6/26/2015 Pensacola, FL Stuart C Irby - Pensacola, FL OEM101 OEM: SLC 500 and RSLogix 500 Fundamentals and Troubleshooting 2.0 $1,240.00 6/23/2015 6/24/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 6/24/2015 6/25/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 6/23/2015 6/23/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1

SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 6/23/2015 6/24/2015 Omaha, NE Consolidated Electrical - Omaha, NE SAF-TUV1 Functional Safety for Machinery Introduction (TÜV Rheinland) 3.0 $1,590.00 6/23/2015 6/25/2015 Greenville, SC McNaughton-McKay - Greenville, SC SAF-TUV3 Functional Safety for Machinery Technician Certification (TÜV Rheinland) 2.5 $2,080.00 6/23/2015 6/25/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SAF-TUVT3 Functional Safety for Machinery Technician Certification Exam (TÜV Rheinland) 0.5 $416.00 6/26/2015 6/26/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH Week of: June 29, 2015 coursecode coursetitle Duration Tuition CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 6/30/2015 6/30/2015 Vancouver, WA Consolidated Electrical - Vancouver, WA 6/30/2015 6/30/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX CCA177 PowerFlex 400/70/700/753 AC Drive Startup for Water / Wastewater Applications 2.0 $1,240.00 6/30/2015 7/1/2015 Oklahoma City, OK Rexel - Oklahoma City, OK

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 6/30/2015 7/1/2015 Loveland, CO Rexel - Loveland, CO CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 6/30/2015 7/1/2015 Bakersfield, CA California Electric - Bakersfield, CA CCN130 Motion Control Fundamentals 2.0 $1,240.00 6/30/2015 7/1/2015 Linden, NJ Turtle & Hughes - Linden, NJ CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 6/30/2015 7/1/2015 Colorado Springs, CO Rexel - Colorado Springs, CO CCP164 DeviceNet and RSNetWorx Configuration and Troubleshooting 3.0 $1,650.00 6/29/2015 7/1/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 6/29/2015 7/2/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY FTAC FactoryTalk AssetCentre System Design and Implementation 3.0 $1,650.00 6/30/2015 7/2/2015 San Ramon, CA Rockwell Automation - San Ramon, CA

OEM101 OEM: SLC 500 and RSLogix 500 Fundamentals and Troubleshooting 2.0 $1,240.00 6/30/2015 7/1/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 6/30/2015 6/30/2015 Jacksonville, FL Englewood Electrical - Jacksonville, FL Week of: July 6, 2015 coursecode coursetitle Duration Tuition CCA177 PowerFlex 400/70/700/753 AC Drive Startup for Water / Wastewater Applications 2.0 $1,240.00 7/7/2015 7/8/2015 Fresno, CA Allied Electric - Fresno, CA CCN130 Motion Control Fundamentals 2.0 $1,240.00 7/7/2015 7/8/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 CCN145 Studio 5000 Logix Designer Level 4: Kinetix 6000 Programming 4.0 $2,070.00 7/7/2015 7/10/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A 7/7/2015 7/10/2015 Rockford, IL Englewood Electrical - Rockford, IL CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 7/7/2015 7/8/2015 Cottage Grove, MN Werner Electric - Cottage Grove, MN

CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 7/7/2015 7/10/2015 Memphis, TN IAC Electrical Equipment and Supplies - Memphis, 7/7/2015 7/10/2015 Jackson, MS Stuart C Irby - Jackson, MS CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 7/7/2015 7/8/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 7/9/2015 7/10/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 7/7/2015 7/8/2015 Eugene, OR Valley River Inn - Eugene, OR 7/8/2015 7/9/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 7/8/2015 7/9/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 7/8/2015 7/9/2015 Cheektowaga, NY Rexel - Cheektowaga, NY CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 7/7/2015 7/7/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 7/7/2015 7/7/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 7/7/2015 7/7/2015 Cheektowaga, NY Rexel - Cheektowaga, NY

CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 7/6/2015 7/10/2015 McComb, MS Stuart C Irby - McComb, MS 7/6/2015 7/10/2015 Colorado Springs, CO Rexel - Colorado Springs, CO CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 7/7/2015 7/10/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 7/7/2015 7/10/2015 State College, PA Schaedler Yesco - State College, PA CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 7/7/2015 7/10/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 7/7/2015 7/10/2015 Topeka, KS Rensenhouse Electric- Topeka, KS 7/7/2015 7/10/2015 Casper, WY Rexel - Casper, WY CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 7/6/2015 7/10/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX CIA101 Introduction to the Integrated Architecture System 2.0 $1,240.00 7/9/2015 7/10/2015 Linthicum, MD Rexel - Linthicum, MD

EM-206 Electrical Troubleshooting 5.0 $2,490.00 7/6/2015 7/10/2015 San Ramon, CA Rockwell Automation - San Ramon, CA ILEAD-013 LEVEL 2: ENHANCED SKILLS 4.0 $2,070.00 7/7/2015 7/10/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 MM-500 Mechanical Concepts 5.0 $2,490.00 7/6/2015 7/10/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SI100 SI: Logix5000 Project Development and Basic Ladder Logic 4.0 $2,070.00 7/7/2015 7/10/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA Week of: July 13, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 7/13/2015 7/14/2015 Asheville, NC Rexel - Asheville, NC 7/14/2015 7/15/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA 7/14/2015 7/15/2015 Casper, WY Rexel - Casper, WY

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 7/15/2015 7/16/2015 Asheville, NC Rexel - Asheville, NC 7/16/2015 7/17/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA 7/16/2015 7/17/2015 Casper, WY Rexel - Casper, WY CCA184 PowerFlex 750-Series Configuration for an Integrated Architecture System * 1.0 $828.00 7/15/2015 7/15/2015 Dothan, AL Stuart C Irby - Dothan, AL 7/17/2015 7/17/2015 Asheville, NC Rexel - Asheville, NC CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 7/14/2015 7/15/2015 Ventura, CA Consolidated Electrical - Ventura, CA 7/16/2015 7/17/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 7/14/2015 7/15/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 7/14/2015 7/17/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO 7/14/2015 7/17/2015 Grand Junction, CO Rexel - Grand Junction, CO

CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 7/14/2015 7/15/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 7/14/2015 7/15/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI 7/14/2015 7/15/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 7/14/2015 7/15/2015 Cheektowaga, NY Rexel - Cheektowaga, NY 7/14/2015 7/15/2015 Dalton, GA Kendall Electric - Dalton, GA CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 7/16/2015 7/17/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 7/16/2015 7/17/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI 7/16/2015 7/17/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 7/16/2015 7/17/2015 Dalton, GA Kendall Electric - Dalton, GA CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 7/14/2015 7/15/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 7/14/2015 7/17/2015 Rochester, NY Rockwell Automation - Rochester, NY 7/14/2015 7/17/2015 Pittston, PA Rexel - Pittston, PA 7/14/2015 7/17/2015 Columbus, GA Consolidated Electrical - Columbus, GA 7/14/2015 7/17/2015 Colorado Springs, CO Rexel - Colorado Springs, CO

CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 7/14/2015 7/14/2015 Hattiesburg, MS Stuart C Irby - Hattiesburg, MS CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 7/13/2015 7/17/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 7/13/2015 7/17/2015 Richmond, VA Rockwell Automation - Richmond, VA 7/13/2015 7/17/2015 Rancho Cucamonga, CA Royal Wholesale Electric - Rancho Cucamonga, CA 7/13/2015 7/17/2015 Augusta, GA Englewood Electrical - Augusta, GA 7/13/2015 7/17/2015 Columbus, GA Consolidated Electrical - Columbus, GA 7/13/2015 7/17/2015 Borger, TX Frank Phillips Community College - Borger, TX 7/13/2015 7/17/2015 Harrisonburg, VA Williams Supply - Harrisonburg, VA CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 7/14/2015 7/17/2015 Linthicum, MD Rexel - Linthicum, MD CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 7/14/2015 7/17/2015 Broken Arrow, OK Rexel - Broken Arrow, OK 7/14/2015 7/17/2015 Rochester, NY Horizon Solutions - Rochester, NY

CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 7/13/2015 7/17/2015 Tampa, FL Rockwell Automation - Tampa, FL 7/13/2015 7/17/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 7/14/2015 7/15/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 7/14/2015 7/15/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 EM-206 Electrical Troubleshooting 5.0 $2,490.00 7/13/2015 7/17/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks ILEAD-012 LEVEL 1: FOUNDATIONAL SKILLS 4.0 $2,070.00 7/14/2015 7/17/2015 Norristown, PA Rockwell Automation - Norristown, PA IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 7/13/2015 7/17/2015 Knoxville, TN Kendall Electric - Knoxville, TN MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 7/14/2015 7/17/2015 City of Industry, CA B & K Electric - City of Industry, CA

PRS101 FactoryTalk Batch Project Design & Implementation 5.0 $2,920.00 7/13/2015 7/17/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 7/15/2015 7/15/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN 7/16/2015 7/16/2015 Ventura, CA Consolidated Electrical - Ventura, CA SAF-TUV2 Functional Safety for Machinery Engineer Certification (TÜV Rheinland) 4.0 $3,080.00 7/13/2015 7/16/2015 Davenport, IA Rockwell Automation - Davenport, IA-Rm 1 SAF-TUVT Functional Safety Engineer Certification (TÜV Rheinland) Test 1.0 $530.00 7/17/2015 7/17/2015 Davenport, IA Rockwell Automation - Davenport, IA-Rm 1 Week of: July 20, 2015 coursecode coursetitle Duration Tuition CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 7/21/2015 7/22/2015 McComb, MS Stuart C Irby - McComb, MS CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 7/21/2015 7/22/2015 Colorado Springs, CO Rexel - Colorado Springs, CO

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 7/22/2015 7/23/2015 Charleston, SC McNaughton-McKay - Charleston, SC 7/23/2015 7/24/2015 Colorado Springs, CO Rexel - Colorado Springs, CO CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 7/21/2015 7/22/2015 Bowling Green, KY Consolidated Electrical - Bowling Green, KY CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 7/21/2015 7/22/2015 Cary, NC Rockwell Automation - Cary, NC 7/21/2015 7/22/2015 Redding, CA Rexel - Redding, CA CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 7/21/2015 7/22/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 7/21/2015 7/22/2015 Brockton, MA NorthEast Electrical - Brockton, MA 7/21/2015 7/22/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 7/21/2015 7/22/2015 Scarborough, ME Horizon Solutions - Scarborough, ME

CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 7/23/2015 7/24/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 7/23/2015 7/24/2015 Brockton, MA NorthEast Electrical - Brockton, MA CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 7/21/2015 7/24/2015 El Paso, TX Border States Electric - El Paso, TX 7/21/2015 7/24/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 7/21/2015 7/24/2015 Greenville, SC McNaughton-McKay - Greenville, SC 7/21/2015 7/24/2015 Cleveland, TN Kendall Electric - Cleveland, TN CCP164 DeviceNet and RSNetWorx Configuration and Troubleshooting 3.0 $1,650.00 7/21/2015 7/23/2015 Wichita, KS Stanion Wholesale Electric - Wichita, KS CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 7/20/2015 7/24/2015 Elizabethtown, KY Consolidated Electrical - Elizabethtown,KY CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 7/20/2015 7/24/2015 Linden, NJ Turtle & Hughes - Linden, NJ 7/20/2015 7/24/2015 Elmira, NY Horizon Solutions - Elmira, NY

CCP710 PLC-5 to ControlLogix Transitioning 2.0 7/21/2015 7/22/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 7/21/2015 7/24/2015 LaVergne, TN Stuart C Irby - LaVergne, TN CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 7/21/2015 7/24/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 7/21/2015 7/24/2015 Phoenix, AZ Border States Electric - Phoenix, AZ CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 7/21/2015 7/24/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 7/20/2015 7/24/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 7/21/2015 7/22/2015 Columbia, SC Englewood Electrical - Columbia, SC 7/21/2015 7/22/2015 Grand Island, NE Kriz-Davis - Grand Island, NE

EM-204 Motor Controls 5.0 $2,490.00 7/20/2015 7/24/2015 Englewood, CO Rockwell Automation - Englewood, CO EM-206 Electrical Troubleshooting 5.0 $2,490.00 7/20/2015 7/24/2015 Pittston, PA Rexel - Pittston, PA FTAC FactoryTalk AssetCentre System Design and Implementation 3.0 $1,650.00 7/21/2015 7/23/2015 Iowa City, IA Van Meter Industrial - Iowa City, IA MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 7/20/2015 7/24/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 7/20/2015 7/24/2015 Rocky Hill, CT HESCO - Rocky Hill, CT 7/20/2015 7/24/2015 Apex, NC Electric Supply & Equipment - Apex, NC SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 7/22/2015 7/23/2015 Florence, SC Englewood Electrical - Florence, SC Week of: July 27, 2015 coursecode coursetitle Duration Tuition

CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 7/28/2015 7/29/2015 Williston, ND Border States Electric - Williston, ND 7/28/2015 7/29/2015 Columbus, MS Stuart C Irby - Columbus, MS 7/28/2015 7/29/2015 Williston, ND Border States Electric - Williston, ND CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 7/30/2015 7/31/2015 Williston, ND Border States Electric - Williston, ND 7/30/2015 7/31/2015 Columbus, MS Stuart C Irby - Columbus, MS CCA184 PowerFlex 750-Series Configuration for an Integrated Architecture System * 1.0 $828.00 7/28/2015 7/28/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 7/30/2015 7/31/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCN145 Studio 5000 Logix Designer Level 4: Kinetix 6000 Programming 4.0 $2,070.00 7/28/2015 7/31/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 7/28/2015 7/31/2015 Little Rock, AR Rockwell Automation - Little Rock, AR-Rm 1

CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 7/28/2015 7/29/2015 Denver, CO Rexel - Denver, CO 7/28/2015 7/29/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A 7/28/2015 7/29/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 7/28/2015 7/29/2015 Oklahoma City, OK Rexel - Oklahoma City, OK CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 7/28/2015 7/29/2015 Denver, CO Rexel - Denver, CO 7/30/2015 7/31/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A 7/30/2015 7/31/2015 Oklahoma City, OK Rexel - Oklahoma City, OK CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 7/30/2015 7/31/2015 Denver, CO Rexel - Denver, CO CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 7/27/2015 7/31/2015 Birmingham, AL Rockwell Automation - Birmingham, AL 7/27/2015 7/31/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI 7/27/2015 7/31/2015 Rochester, NY Horizon Solutions - Rochester, NY 7/27/2015 7/31/2015 Corpus Christi, TX Mid-Coast Electric - Corpus Christi, TX 7/27/2015 7/31/2015 Fresno, CA Allied Electric - Fresno, CA

CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 7/27/2015 7/30/2015 Linthicum, MD Rexel - Linthicum, MD 7/28/2015 7/31/2015 Guilderland Center, NY Horizon Solutions - Guilderland Center, NY 7/28/2015 7/31/2015 El Paso, TX Border States Electric - El Paso, TX 7/28/2015 7/31/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 7/27/2015 7/31/2015 Brockton, MA NorthEast Electrical - Brockton, MA EM-204 Motor Controls 5.0 $2,490.00 7/27/2015 7/31/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 7/27/2015 7/31/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 7/27/2015 7/31/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH OEM101 OEM: SLC 500 and RSLogix 500 Fundamentals and Troubleshooting 2.0 $1,240.00 7/27/2015 7/28/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO

PRS013 PlantPAx Process System Configuration 4.5 $3,450.00 7/27/2015 7/31/2015 San Ramon, CA Rockwell Automation - San Ramon, CA PRS018 PlantPAx Process System Integration 5.0 $3,850.00 7/27/2015 7/31/2015 Portland, OR Downtown Lloyd Center Marriott - Portland, OR SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 7/29/2015 7/30/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 7/28/2015 7/28/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 7/28/2015 7/28/2015 Roanoke, VA Williams Supply - Roanoke, VA 7/30/2015 7/30/2015 Harrisonburg, VA Williams Supply - Harrisonburg, VA SI101 SI: FactoryTalk View SE Configuration 3.0 $1,650.00 7/28/2015 7/30/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX Week of: August 3, 2015 coursecode coursetitle Duration Tuition

CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 8/4/2015 8/5/2015 Omaha, NE Consolidated Electrical - Omaha, NE CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 8/4/2015 8/5/2015 Grand Island, NE Kriz-Davis - Grand Island, NE 8/6/2015 8/7/2015 Omaha, NE Consolidated Electrical - Omaha, NE CCA184 PowerFlex 750-Series Configuration for an Integrated Architecture System * 1.0 $828.00 8/4/2015 8/4/2015 Grand Island, NE Kriz-Davis - Grand Island, NE CCN130 Motion Control Fundamentals 2.0 $1,240.00 8/4/2015 8/5/2015 Ogden, UT Codale Electric Supply - Ogden, UT 8/4/2015 8/5/2015 Loveland, CO Rexel - Loveland, CO CCN145 Studio 5000 Logix Designer Level 4: Kinetix 6000 Programming 4.0 $2,070.00 8/4/2015 8/7/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 8/6/2015 8/7/2015 Pittston, PA Rexel - Pittston, PA

CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 8/4/2015 8/7/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 8/4/2015 8/7/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 8/4/2015 8/5/2015 Phoenix, AZ Border States Electric - Phoenix, AZ CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 8/6/2015 8/7/2015 Phoenix, AZ Border States Electric - Phoenix, AZ CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 8/4/2015 8/7/2015 Hot Springs, AR Stuart C Irby - Hot Springs, AR CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 8/6/2015 8/7/2015 Swanton, VT FGIWIB Technical Center - Swanton, VT CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 8/4/2015 8/4/2015 Columbus, MS Stuart C Irby - Columbus, MS 8/5/2015 8/5/2015 Swanton, VT FGIWIB Technical Center - Swanton, VT 8/6/2015 8/6/2015 Rocky Hill, CT HESCO - Rocky Hill, CT

CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/3/2015 8/7/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/3/2015 8/7/2015 State College, PA Schaedler Yesco - State College, PA 8/3/2015 8/7/2015 Maryland, MO French Gerleman - Maryland Hts, MO 8/3/2015 8/7/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm 8/3/2015 8/7/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 8/3/2015 8/7/2015 San Leandro, CA Royal Wholesale Electric - San Leandro, CA 8/3/2015 8/7/2015 Portage, MI Kendall Electric - Portage, MI CCP800 Introduction to Automation 3.0 $1,350.00 8/4/2015 8/6/2015 Chatsworth, CA Royal Wholesale Electric - Chatsworth, CA CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 8/3/2015 8/7/2015 Duluth, MN Mielke Electric (Garfield Ave.) - Duluth, MN EM-204 Motor Controls 5.0 $2,490.00 8/3/2015 8/7/2015 Marlboro, MA Rockwell Automation - Marlboro, MA

IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 8/3/2015 8/7/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 8/3/2015 8/7/2015 Birmingham, AL Kendall Electric - Birmingham, AL 8/3/2015 8/7/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT 8/3/2015 8/7/2015 Ft. Smith, AR Keathley-Patterson Electric - Ft. Smith, AR M850P Micro850 Programming 2.0 $1,240.00 8/4/2015 8/5/2015 Maumee, OH McNaughton-McKay - Maumee, OH MM-500 Mechanical Concepts 5.0 $2,490.00 8/3/2015 8/7/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks RS-FTHSEC FactoryTalk Historian SE Configuration and Data Collection 3.5 $2,090.00 8/4/2015 8/7/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA SAF-COM101 Safety Relays and Devices Maintenance and Troubleshooting 2.0 $1,240.00 8/4/2015 8/5/2015 Linden, NJ Turtle & Hughes - Linden, NJ SAF-TUV1 Functional Safety for Machinery Introduction (TÜV Rheinland) 3.0 $1,590.00 8/4/2015 8/6/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO

SAF-TUV2 Functional Safety for Machinery Engineer Certification (TÜV Rheinland) 4.0 $3,080.00 8/3/2015 8/6/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY SAF-TUVT Functional Safety Engineer Certification (TÜV Rheinland) Test 1.0 $530.00 8/7/2015 8/7/2015 Lousiville, KY E & H Electric Supply - Lousiville, KY Week of: August 10, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 8/11/2015 8/12/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 8/11/2015 8/12/2015 Fresno, CA Allied Electric - Fresno, CA 8/13/2015 8/14/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 8/13/2015 8/14/2015 Apex, NC Electric Supply & Equipment - Apex, NC CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 8/11/2015 8/14/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A

8/11/2015 8/14/2015 Maryland, MO French Gerleman - Maryland Hts, MO 8/11/2015 8/14/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 8/11/2015 8/14/2015 Oklahoma City, OK Rexel - Oklahoma City, OK CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 8/11/2015 8/12/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 8/11/2015 8/12/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA 8/11/2015 8/12/2015 Hagerstown, MD Rexel - Hagerstown, MD 8/11/2015 8/12/2015 Apex, NC Electric Supply & Equipment - Apex, NC CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 8/13/2015 8/14/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA 8/13/2015 8/14/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 8/13/2015 8/14/2015 Hagerstown, MD Rexel - Hagerstown, MD CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 8/11/2015 8/14/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 8/11/2015 8/14/2015 Farmington, NM Border States Electric - Farmington, NM 8/11/2015 8/14/2015 Texarcana, TX Stuart C Irby - Texarcana, TX CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 8/11/2015 8/11/2015 Mobile, AL Stuart C Irby - Mobile, AL

CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/10/2015 8/14/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/10/2015 8/14/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 8/10/2015 8/14/2015 Sidney, OH FDL Automation - Sidney, OH 8/10/2015 8/14/2015 Denver, CO Rexel - Denver, CO CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 8/11/2015 8/14/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 8/11/2015 8/14/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 8/11/2015 8/14/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 8/11/2015 8/14/2015 Grand Rapids, MI Kendall Electric - Grand Rapids, MI CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 8/10/2015 8/14/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT

CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 8/13/2015 8/14/2015 Holland, MI Kendall Electric - Holland, MI CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 8/11/2015 8/12/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN EM-101A Basic AC/DC Concepts 5.0 $2,490.00 8/10/2015 8/14/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH EM-204 Motor Controls 5.0 $2,490.00 8/10/2015 8/14/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 8/10/2015 8/14/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 8/10/2015 8/14/2015 Brockton, MA NorthEast Electrical - Brockton, MA 8/10/2015 8/14/2015 Racine, WI Nelson Electric Supply - Racine, WI IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies, v1.0 5.0 8/10/2015 8/14/2015 Englewood, CO Rockwell Automation - Englewood, CO

MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 8/11/2015 8/14/2015 LaVergne, TN Stuart C Irby - LaVergne, TN MM-500 Mechanical Concepts 5.0 $2,490.00 8/10/2015 8/14/2015 Norristown, PA Rockwell Automation - Norristown, PA OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 8/10/2015 8/14/2015 Riverside, CA Royal Wholesale Electric - Riverside, CA SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 8/11/2015 8/12/2015 City of Industry, CA B & K Electric - City of Industry, CA 8/11/2015 8/12/2015 Augusta, GA Englewood Electrical - Augusta, GA Week of: August 17, 2015 coursecode coursetitle Duration Tuition CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 8/18/2015 8/19/2015 Pittston, PA Rexel - Pittston, PA CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 8/18/2015 8/19/2015 Denver, CO Rexel - Denver, CO

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 8/20/2015 8/21/2015 Denver, CO Rexel - Denver, CO CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 8/20/2015 8/21/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCI108 CENTERLINE MCC with IntelliCENTER Software Commissioning 3.0 $1,650.00 8/18/2015 8/20/2015 Baton Rouge, LA Reynolds Company - Baton Rouge, LA CCN144 Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP) Programming 4.0 $2,070.00 8/18/2015 8/21/2015 Sedalia, MO SMC - Sedalia, MO CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 8/18/2015 8/21/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 8/18/2015 8/21/2015 Rochester, NY Horizon Solutions - Rochester, NY CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 8/18/2015 8/19/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 8/18/2015 8/19/2015 Elko, NV Codale Electric Supply - Elko, NV

CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 8/18/2015 8/19/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCP164 DeviceNet and RSNetWorx Configuration and Troubleshooting 3.0 $1,650.00 8/18/2015 8/20/2015 Riverside, CA Royal Wholesale Electric - Riverside, CA CCP177 NetLinx System Maintenance and Troubleshooting 4.0 $2,490.00 8/18/2015 8/21/2015 Macon, GA Englewood Electrical - Macon, GA CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/17/2015 8/21/2015 Eugene, OR Valley River Inn 8/17/2015 8/21/2015 Harahan, LA Reynolds Company - Harahan, LA 8/17/2015 8/21/2015 Cheektowaga, NY Rexel - Cheektowaga, NY 8/17/2015 8/21/2015 Little Rock, AR Rockwell Automation - Little Rock, AR-Rm 1 8/17/2015 8/21/2015 Palo Alto, CA Buckles Smith - Palo Alto, CA 8/17/2015 8/21/2015 Tupelo, MS Stuart C Irby - Tupelo, MS 8/17/2015 8/21/2015 Rocky Hill, CT HESCO - Rocky Hill, CT CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 8/18/2015 8/21/2015 York, PA Schaedler Yesco - York, PA

8/18/2015 8/21/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 8/18/2015 8/21/2015 Memphis, TN IAC Electrical Equipment and Supplies - Memphis, 8/18/2015 8/21/2015 Tampa, FL Rockwell Automation - Tampa, FL CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 8/17/2015 8/21/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 8/17/2015 8/21/2015 Scarborough, ME Horizon Solutions - Scarborough, ME CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 8/18/2015 8/19/2015 Linthicum, MD Rexel - Linthicum, MD 8/18/2015 8/19/2015 Asheville, NC Rexel - Asheville, NC ILEAD-012 LEVEL 1: FOUNDATIONAL SKILLS 4.0 $2,070.00 8/18/2015 8/21/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 8/17/2015 8/21/2015 Duluth, MN Mielke Electric (Garfield Ave.) - Duluth, MN 8/17/2015 8/21/2015 Billings, MT Border States Electric - Billings, MT 8/17/2015 8/21/2015 York, PA Schaedler Yesco - York, PA

MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 8/17/2015 8/21/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX PRS018 PlantPAx Process System Integration 5.0 $3,850.00 8/17/2015 8/21/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 PRS101 FactoryTalk Batch Project Design & Implementation 5.0 $2,920.00 8/17/2015 8/21/2015 San Ramon, CA Rockwell Automation - San Ramon, CA RS-FTHSEC FactoryTalk Historian SE Configuration and Data Collection 3.5 $2,090.00 8/18/2015 8/21/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 8/18/2015 8/19/2015 Ventura, CA Consolidated Electrical - Ventura, CA SAF-TUV3 Functional Safety for Machinery Technician Certification (TÜV Rheinland) 2.5 $2,080.00 8/18/2015 8/20/2015 Norristown, PA Rockwell Automation - Norristown, PA 8/21/2015 8/23/2015 Norristown, PA Rockwell Automation - Norristown, PA

SI101 SI: FactoryTalk View SE Configuration 3.0 $1,650.00 8/18/2015 8/20/2015 Norcross, GA McNaughton-McKay - Norcross, GA Week of: August 24, 2015 coursecode coursetitle Duration Tuition CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 8/25/2015 8/26/2015 Broken Arrow, OK Rexel - Broken Arrow, OK CCA161 PowerFlex 700 Vector Control Configuration & Startup 1.0 $828.00 8/25/2015 8/25/2015 Wichita, KS Stanion Wholesale Electric - Wichita, KS CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 8/26/2015 8/26/2015 Wichita, KS Stanion Wholesale Electric - Wichita, KS CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 8/25/2015 8/26/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 8/25/2015 8/26/2015 Florence, SC Englewood Electrical - Florence, SC 8/25/2015 8/26/2015 Reading, PA Fromm Electric Supply - Reading, PA 8/25/2015 8/26/2015 Jackson, TN Kendall Electric - Jackson, TN

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 8/27/2015 8/28/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 8/27/2015 8/28/2015 Florence, SC Englewood Electrical - Florence, SC 8/27/2015 8/28/2015 Jackson, TN Kendall Electric - Jackson, TN CCN190 Studio 5000 Logix Designer Level 5: Advanced Motion Programming 2.0 $1,240.00 8/25/2015 8/26/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 8/25/2015 8/28/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 8/25/2015 8/28/2015 Bakersfield, CA California Electric - Bakersfield, CA CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 8/25/2015 8/26/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 8/25/2015 8/26/2015 Huntington, WV State Electric Supply - Huntington, WV 8/25/2015 8/26/2015 Huntington, WV State Electric Supply - Huntington, WV CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 8/27/2015 8/28/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE 8/27/2015 8/28/2015 El Dorado, AR Rexel - El Dorado, AR

CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 8/25/2015 8/26/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 8/25/2015 8/28/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 8/25/2015 8/28/2015 San Leandro, CA Royal Wholesale Electric - San Leandro, CA 8/25/2015 8/28/2015 Linden, NJ Turtle & Hughes - Linden, NJ 8/25/2015 8/28/2015 Fort Wayne, IN Kendall Electric - Fort Wayne, IN CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 8/26/2015 8/27/2015 Knoxville, TN Kendall Electric - Knoxville, TN CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 8/25/2015 8/25/2015 Knoxville, TN Kendall Electric - Knoxville, TN CCP196 PanelView 300/550/600/900/1000/1400 & PanelBuilder32 Application Development 2.0 $1,240.00 8/25/2015 8/26/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 8/24/2015 8/28/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI

8/24/2015 8/28/2015 Denver, CO Rexel - Denver, CO 8/24/2015 8/28/2015 Odessa, TX Reynolds Company - Odessa, TX 8/24/2015 8/28/2015 Cary, NC Rockwell Automation - Cary, NC 8/24/2015 8/28/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV 8/24/2015 8/28/2015 Greensboro, NC Electric Supply & Equipment - Greensboro, NC CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 8/25/2015 8/28/2015 Santa Rosa, CA Consolidated Electrical - Santa Rosa, CA CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 8/25/2015 8/28/2015 Columbus, OH McNaughton-McKay - Columbus, OH 8/25/2015 8/28/2015 Pittsburgh, PA CED Mosebach - Pittsburgh, PA CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 8/24/2015 8/28/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 8/25/2015 8/26/2015 Richmond, VA Rockwell Automation - Richmond, VA 8/25/2015 8/26/2015 Cottage Grove, MN Werner Electric - Cottage Grove, MN

CIA101 Introduction to the Integrated Architecture System 2.0 $1,240.00 8/25/2015 8/26/2015 Bakersfield, CA California Electric - Bakersfield, CA EM-204 Motor Controls 5.0 $2,490.00 8/24/2015 8/28/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH EM-206 Electrical Troubleshooting 5.0 $2,490.00 8/24/2015 8/28/2015 Franklin, TN Rockwell Automation - Franklin, TN- Rm 1 IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 8/24/2015 8/28/2015 Sidney, OH FDL Automation - Sidney, OH 8/24/2015 8/28/2015 Portland, OR Downtown Lloyd Center Marriott - Portland, OR MM-500 Mechanical Concepts 5.0 $2,490.00 8/24/2015 8/28/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 $2,490.00 8/24/2015 8/28/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI

SAF-COM101 Safety Relays and Devices Maintenance and Troubleshooting 2.0 $1,240.00 8/25/2015 8/26/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 8/26/2015 8/26/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 8/28/2015 8/28/2015 Sandusky, OH Brohl & Appell - Sandusky, OH SAF-TUV2 Functional Safety for Machinery Engineer Certification (TÜV Rheinland) 4.0 $3,080.00 8/24/2015 8/27/2015 Tampa, FL Rockwell Automation - Tampa, FL SAF-TUVT Functional Safety Engineer Certification (TÜV Rheinland) Test 1.0 $530.00 8/28/2015 8/28/2015 Tampa, FL Rockwell Automation - Tampa, FL Week of: August 31, 2015 coursecode coursetitle Duration Tuition CCA161 PowerFlex 700 Vector Control Configuration & Startup 1.0 $828.00 9/3/2015 9/3/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 9/3/2015 9/3/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks

9/4/2015 9/4/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 9/1/2015 9/2/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 9/3/2015 9/4/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT CCN190 Studio 5000 Logix Designer Level 5: Advanced Motion Programming 2.0 $1,240.00 9/3/2015 9/4/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 9/1/2015 9/2/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 9/1/2015 9/4/2015 Joplin, MO SMC - Joplin, MO CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 9/1/2015 9/2/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1

CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 9/3/2015 9/4/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 9/2/2015 9/3/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 9/1/2015 9/1/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 9/1/2015 9/4/2015 Englewood, CO Rockwell Automation - Englewood, CO 9/1/2015 9/4/2015 Tuscaloosa, AL Kendall Electric - Tuscaloosa, AL FTVP FactoryTalk VantagePoint Configuration and Reporting 3.0 $1,650.00 9/1/2015 9/3/2015 San Ramon, CA Rockwell Automation - San Ramon, CA IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies, v1.0 5.0 8/31/2015 9/4/2015 Maryland, MO French Gerleman - Maryland Hts, MO

OEM101 OEM: SLC 500 and RSLogix 500 Fundamentals and Troubleshooting 2.0 $1,240.00 9/1/2015 9/2/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI PRS018 PlantPAx Process System Integration 5.0 $3,850.00 8/31/2015 9/4/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 9/3/2015 9/4/2015 San Antonio, TX Mid-Coast Electric - San Antonio, TX SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 9/1/2015 9/1/2015 Maryland, MO French Gerleman - Maryland Hts, MO SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 9/1/2015 9/2/2015 Columbia, SC Englewood Electrical - Columbia, SC SI100 SI: Logix5000 Project Development and Basic Ladder Logic 4.0 $2,070.00 9/1/2015 9/4/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX Week of: September 7, 2015 coursecode coursetitle Duration Tuition

CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 9/9/2015 9/10/2015 Carson, CA Royal Wholesale Electric - Carson, CA CCA163 PowerFlex 700 Vector Control Maintenance & Troubleshooting 1.0 $828.00 9/9/2015 9/9/2015 Concord, CA Buckles Smith - Concord, CA CCN130 Motion Control Fundamentals 2.0 $1,240.00 9/9/2015 9/10/2015 San Ramon, CA Rockwell Automation - San Ramon, CA CCP122 PLC-5/SLC 500 and RSLogix Fundamentals 2.0 $1,240.00 9/9/2015 9/10/2015 Bellevue, WA Rockwell Automation - Bellevue, WA-Rm A 9/9/2015 9/10/2015 State College, PA Schaedler Yesco - State College, PA CCP152 Studio 5000 Logix Designer Level 4: Function Block Programming 2.0 $1,240.00 9/9/2015 9/10/2015 Odessa, TX Reynolds Company - Odessa, TX SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 9/10/2015 9/11/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1 Week of: September 14, 2015 coursecode coursetitle Duration Tuition

CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 9/15/2015 9/16/2015 Tupelo, MS Stuart C Irby - Tupelo, MS 9/17/2015 9/18/2015 Sandusky, OH Brohl & Appell - Sandusky, OH CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 9/15/2015 9/16/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks 9/15/2015 9/16/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 9/15/2015 9/16/2015 Reno, NV Grove Madsen Industries - Reno, NV 9/16/2015 9/17/2015 Bangor, ME Horizon Solutions - Bangor, ME 9/16/2015 9/17/2015 Harrisonburg, VA Williams Supply - Harrisonburg, VA 9/17/2015 9/18/2015 Charlotte, NC Rockwell Automation - Charlotte, NC- Lg Rm 9/17/2015 9/18/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCA184 PowerFlex 750-Series Configuration for an Integrated Architecture System * 1.0 $828.00 9/17/2015 9/17/2015 Reno, NV Grove Madsen Industries - Reno, NV CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 $1,240.00 9/17/2015 9/18/2015 Roseville, MN Rockwell Automation - Roseville, MN-Rm 1

CCN130 Motion Control Fundamentals 2.0 $1,240.00 9/15/2015 9/16/2015 Bluffton, IN Wabash Electric Supply - Bluffton, IN CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 9/15/2015 9/16/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI 9/15/2015 9/16/2015 Cary, NC Rockwell Automation - Cary, NC 9/15/2015 9/16/2015 Eugene, OR Valley River Inn CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 9/15/2015 9/16/2015 Reading, PA Fromm Electric Supply - Reading, PA 9/17/2015 9/18/2015 Cary, NC Rockwell Automation - Cary, NC 9/17/2015 9/18/2015 Eugene, OR Valley River Inn CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 9/15/2015 9/18/2015 Conshohocken, PA Rumsey Electric - Conshohocken, PA 9/15/2015 9/18/2015 Sedalia, MO SMC - Sedalia, MO CCP154 Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming 2.0 $1,240.00 9/15/2015 9/16/2015 Oklahoma City, OK Rexel - Oklahoma City, OK

CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 9/16/2015 9/17/2015 Englewood, CO Rockwell Automation - Englewood, CO CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 9/15/2015 9/15/2015 Englewood, CO Rockwell Automation - Englewood, CO 9/16/2015 9/16/2015 Columbia, SC Englewood Electrical - Columbia, SC CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 9/14/2015 9/18/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 9/14/2015 9/18/2015 Omaha, NE Consolidated Electrical - Omaha, NE 9/14/2015 9/18/2015 Guilderland Center, NY Horizon Solutions - Guilderland Center, NY 9/14/2015 9/18/2015 Carrollton, TX Rockwell Automation - Carrollton, TX-Rm 1 9/14/2015 9/18/2015 San Ramon, CA Rockwell Automation - San Ramon, CA 9/14/2015 9/18/2015 Columbus, OH McNaughton-McKay - Columbus, OH 9/14/2015 9/18/2015 Linthicum, MD Rexel - Linthicum, MD 9/14/2015 9/18/2015 Moses Lake, WA Best Western - Moses Lake, WA 9/14/2015 9/18/2015 Sulphur, LA Reynolds Company - Sulphur, LA CCPS41 SLC 500 & RSLogix 500 Programming 4.0 $2,070.00 9/15/2015 9/18/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX

CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 9/15/2015 9/18/2015 Indianapolis, IN Rockwell Automation - Indianapolis, IN - ICE CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 9/15/2015 9/18/2015 Huntington, WV State Electric Supply - Huntington, WV 9/15/2015 9/18/2015 Bakersfield, CA California Electric - Bakersfield, CA CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 9/14/2015 9/18/2015 Billings, MT Border States Electric - Billings, MT 9/14/2015 9/18/2015 Maumee, OH McNaughton-McKay - Maumee, OH 9/14/2015 9/18/2015 Tucson, AZ Border States Electric - Tucson, AZ CCV209 FactoryTalk View ME & PanelView Plus Maintenance and Troubleshooting 2.0 $1,240.00 9/15/2015 9/16/2015 Sidney, OH FDL Automation - Sidney, OH ILEAD-013 LEVEL 2: ENHANCED SKILLS 4.0 $2,070.00 9/15/2015 9/18/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 9/14/2015 9/18/2015 Anaheim, CA Rockwell Automation - Anaheim, CA - Rm A

9/14/2015 9/18/2015 Green Bay, WI Werner Electric - Green Bay,WI 9/14/2015 9/18/2015 Portland, 9/14/2015 9/18/2015 Alpharetta, GA Rockwell Automation - Alpharetta, GA IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies, v1.0 5.0 9/14/2015 9/18/2015 Phoenix, AZ Border States Electric - Phoenix, AZ 9/14/2015 9/18/2015 Roseville, MN Rockwell Automation - Roseville,MN-Demo 9/14/2015 9/18/2015 Fargo, MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 9/15/2015 9/18/2015 Augusta, GA Englewood Electrical - Augusta, GA PRS016 Life Sciences Application Suite Configuration 2.0 $1,700.00 9/15/2015 9/16/2015 San Ramon, CA Rockwell Automation - San Ramon, CA SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 9/16/2015 9/17/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO 9/16/2015 9/17/2015 Asheville, NC Rexel - Asheville, NC 9/17/2015 9/18/2015 Pittston, PA Rexel - Pittston, PA

SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 9/15/2015 9/15/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO 9/15/2015 9/15/2015 Asheville, NC Rexel - Asheville, NC 9/16/2015 9/16/2015 Pittston, PA Rexel - Pittston, PA SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 $437.00 9/15/2015 9/15/2015 Troy, MI Rockwell Automation - Troy, MI - Room 1 9/15/2015 9/15/2015 Cheektowaga, NY Rexel - Cheektowaga, NY SAF-TUV2 Functional Safety for Machinery Engineer Certification (TÜV Rheinland) 4.0 $3,080.00 9/14/2015 9/17/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SAF-TUV3 Functional Safety for Machinery Technician Certification (TÜV Rheinland) 2.5 $2,080.00 9/15/2015 9/17/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO SAF-TUVT Functional Safety Engineer Certification (TÜV Rheinland) Test 1.0 $530.00 9/18/2015 9/18/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SI100 SI: Logix5000 Project Development and Basic Ladder Logic 4.0 $2,070.00 9/15/2015 9/18/2015 Linden, NJ Turtle & Hughes - Linden, NJ

Week of: September 21, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 $1,240.00 9/22/2015 9/23/2015 Baton Rouge, LA Reynolds Company - Baton Rouge, LA 9/22/2015 9/23/2015 Birmingham, AL Kendall Electric - Birmingham, AL CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 9/22/2015 9/23/2015 Modesto, CA Rexel - Modesto, CA 9/23/2015 9/24/2015 Roanoke, VA Williams Supply - Roanoke, VA 9/24/2015 9/25/2015 Baton Rouge, LA Reynolds Company - Baton Rouge, LA 9/24/2015 9/25/2015 Birmingham, AL Kendall Electric - Birmingham, AL CCN130 Motion Control Fundamentals 2.0 $1,240.00 9/22/2015 9/23/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCN200 Kinetix 6000 Troubleshooting and Project Interpretation 2.0 $1,240.00 9/24/2015 9/25/2015 Maryland, MO French Gerleman - Maryland Hts, MO CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 $2,070.00 9/22/2015 9/25/2015 Omaha, NE Consolidated Electrical - Omaha, NE

9/22/2015 9/25/2015 Harrisonburg, VA Williams Supply - Harrisonburg, VA CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 9/22/2015 9/23/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 $1,240.00 9/22/2015 9/23/2015 Decatur, IL Kirby Risk Electrical - Decatur, IL 9/24/2015 9/25/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Hawks CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 $2,070.00 9/22/2015 9/25/2015 Cary, NC Rockwell Automation - Cary, NC CCP179 Stratix 5700 Switch Configuration for an EtherNet/IP Network 2.0 $1,240.00 9/23/2015 9/24/2015 Richmond, VA Rockwell Automation - Richmond, VA 9/23/2015 9/24/2015 Scarborough, ME Horizon Solutions - Scarborough, ME CCP180 EtherNet/IP Fundamentals and Troubleshooting 1.0 $836.00 9/22/2015 9/22/2015 Richmond, VA Rockwell Automation - Richmond, VA 9/22/2015 9/22/2015 Scarborough, ME Horizon Solutions - Scarborough, ME

CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 $2,490.00 9/21/2015 9/25/2015 Englewood, CO Rockwell Automation - Englewood, CO CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 $2,490.00 9/21/2015 9/25/2015 San Antonio, TX Mid-Coast Electric - San Antonio, TX 9/21/2015 9/25/2015 Memphis, TN IAC Electrical Equipment and Supplies - Memphis, 9/21/2015 9/25/2015 Tampa, FL Rockwell Automation - Tampa, FL 9/21/2015 9/25/2015 Stockton, CA Rexel - Stockton, CA 9/21/2015 9/25/2015 Brockton, MA NorthEast Electrical - Brockton, MA 9/21/2015 9/25/2015 Cheektowaga, NY Rexel - Cheektowaga, NY 9/21/2015 9/25/2015 Cape Girardeau, MO SMC - Cape Girardeau, MO CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 $2,070.00 9/22/2015 9/25/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 $2,070.00 9/22/2015 9/25/2015 The Woodlands, TX Rockwell Automation - The Woodlands, TX 9/22/2015 9/25/2015 Rockford, IL Englewood Electrical - Rockford, IL

CCV206 FactoryTalk View SE Maintenance and Troubleshooting 2.0 $1,240.00 9/22/2015 9/23/2015 Ventura, CA Consolidated Electrical - Ventura, CA CCV207 FactoryTalk View SE Programming 4.5 $2,490.00 9/21/2015 9/25/2015 State College, PA Schaedler Yesco - State College, PA EM-206 Electrical Troubleshooting 5.0 $2,490.00 9/21/2015 9/25/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH FTVP FactoryTalk VantagePoint Configuration and Reporting 3.0 $1,650.00 9/22/2015 9/24/2015 Salt Lake City, UT Codale Electric Supply - Salt Lake City, UT ILEAD-013 LEVEL 2: ENHANCED SKILLS 4.0 $2,070.00 9/22/2015 9/25/2015 Norristown, PA Rockwell Automation - Norristown, PA IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 $3,375.00 9/21/2015 9/25/2015 Phoenix, AZ Border States Electric - Phoenix, AZ 9/21/2015 9/25/2015 Milwaukee, WI Rockwell Automation - Milwaukee, WI 9/21/2015 9/25/2015 Linthicum, MD Rexel - Linthicum, MD 9/21/2015 9/25/2015 Greensboro, NC Electric Supply & Equipment - Greensboro, NC

IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies, v1.0 5.0 9/21/2015 9/25/2015 San Ramon, CA Rockwell Automation - San Ramon, CA MFG213 Industrial Electrical Controls Fundamentals 4.0 $1,990.00 9/22/2015 9/25/2015 Las Vegas, NV Grove Madsen Industries - Las Vegas, NV MM-400 Hydraulics and Pneumatics 5.0 $2,490.00 9/21/2015 9/25/2015 San Ramon, CA Rockwell Automation - San Ramon, CA PFX700S2 PowerFlex 700S Phase II Maintenance & Troubleshooting 3.0 $1,650.00 9/22/2015 9/24/2015 Broken Arrow, OK Rexel - Broken Arrow, OK SAF-LOG101 GuardLogix Application Development 2.0 $1,250.00 9/22/2015 9/23/2015 Burr Ridge, IL Rockwell Automation - Burr Ridge, IL-Cubs 9/23/2015 9/24/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1 SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 $828.00 9/22/2015 9/22/2015 Wayland, MI Rockwell Automation - Wayland, MI - Room 1

SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 9/22/2015 9/23/2015 Syracuse, NY CED Baldwin Hall - Syracuse, NY SI101 SI: FactoryTalk View SE Configuration 3.0 $1,650.00 9/22/2015 9/24/2015 Linden, NJ Turtle & Hughes - Linden, NJ Week of: September 28, 2015 coursecode coursetitle Duration Tuition CCA101 AC/DC Motors & Drives Fundamentals 2.0 $1,240.00 9/29/2015 9/30/2015 Harrisburg, PA Schaedler Yesco - Harrisburg, PA 9/29/2015 9/30/2015 Brockton, MA NorthEast Electrical - Brockton, MA CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 $1,240.00 9/29/2015 9/30/2015 Reno, NV Grove Madsen Industries - Reno, NV 9/29/2015 9/30/2015 Huntington, WV State Electric Supply - Huntington, WV 10/1/2015 10/2/2015 Brockton, MA NorthEast Electrical - Brockton, MA CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 $1,240.00 9/29/2015 9/30/2015 Kingsport, TN Kendall Electric - Kingsport, TN 9/29/2015 9/30/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI

9/29/2015 9/30/2015 Springboro, OH CBT Company - Springboro, OH CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 10/1/2015 10/2/2015 Kingsport, TN Kendall Electric - Kingsport, TN 10/1/2015 10/2/2015 Sheboygan Falls, WI Englewood Electrical - Sheboygan Falls, WI 10/1/2015 10/2/2015 Springboro, OH CBT Company - Springboro, OH IMINS Managing Industrial Networks with Cisco Networking Technologies 5.0 9/28/2015 10/2/2015 Salt Lake City, 9/28/2015 10/2/2015 Sedalia, MO SMC - Sedalia, MO 9/28/2015 10/2/2015 Rocky Hill, CT HESCO - Rocky Hill, CT IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies, v1.0 5.0 9/28/2015 10/2/2015 Las Vegas, 9/28/2015 10/2/2015 Kansas City, MO Rensenhouse Electric - Kansas City, MO PRS018 PlantPAx Process System Integration 5.0 9/28/2015 10/2/2015 Twinsburg, OH Rockwell Automation - Twinsburg, OH SAF-SFT11215 NFPA 70E 2015 - Electrical Safety and Arc Flash Compliance 2.0 $831.00 9/29/2015 9/30/2015 Santa Maria, CA Royal Wholesale Electric - Santa Maria, CA

SAF-SFT2014A 2014 National Electrical Code (NEC): UPDATE AWARENESS 2.0 9/30/2015 10/1/2015 Buffalo Grove, IL Revere Electric - Buffalo Grove, IL Week of: October 5, 2015 coursecode coursetitle Duration Tuition SAF-SFT10615 NFPA 70E 2015 - Arc Flash Awareness 1.0 10/6/2015 10/6/2015 Erie, PA Winkle Electric - Erie, PA 10/6/2015 10/6/2015 Youngstown, OH Winkle Electric - Youngstown, OH Week of: October 12, 2015 coursecode coursetitle Duration Tuition CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 10/13/2015 10/16/2015 Springboro, OH CBT Company - Springboro, OH CCP298 Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting 4.5 10/12/2015 10/16/2015 Hagerstown, MD Rexel - Hagerstown, MD MFG213 Industrial Electrical Controls Fundamentals 4.0 10/13/2015 10/16/2015 Columbia, SC Englewood Electrical - Columbia, SC

Week of: October 19, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 10/20/2015 10/21/2015 Linthicum, MD Rexel - Linthicum, MD CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 10/22/2015 10/23/2015 Linthicum, MD Rexel - Linthicum, MD OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 10/19/2015 10/23/2015 Sidney, OH FDL Automation - Sidney, OH Week of: October 26, 2015 coursecode coursetitle Duration Tuition CCA176 PowerFlex 400/70/700/753 AC Drive Startup for Water / Wastewater Applications 3.0 10/27/2015 10/29/2015 Mequon, WI Rockwell Automation - Mequon, WI CCA182 PowerFlex 750 Series Configuration and Startup 2.0 10/27/2015 10/28/2015 Columbia, SC Englewood Electrical - Columbia, SC

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 10/27/2015 10/28/2015 Columbia, SC Englewood Electrical - Columbia, SC CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 10/27/2015 10/30/2015 West Monroe, LA Rexel - West Monroe, LA CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 10/26/2015 10/30/2015 Springboro, OH CBT Company - Springboro, OH CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 10/27/2015 10/30/2015 Brockton, MA NorthEast Electrical - Brockton, MA Week of: November 2, 2015 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 11/2/2015 11/6/2015 Erie, PA Winkle Electric - Erie, PA CCP299T Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 11/2/2015 11/6/2015 El Dorado, AR Rexel - El Dorado, AR

CCV207 FactoryTalk View SE Programming 4.5 11/2/2015 11/6/2015 Springboro, OH CBT Company - Springboro, OH Week of: November 9, 2015 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 11/9/2015 11/13/2015 Sidney, OH FDL Automation - Sidney, OH CCV207 FactoryTalk View SE Programming 4.5 11/9/2015 11/13/2015 Youngstown, OH Winkle Electric - Youngstown, OH Week of: November 16, 2015 coursecode coursetitle Duration Tuition CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 11/17/2015 11/20/2015 Linthicum, MD Rexel - Linthicum, MD Week of: November 30, 2015 coursecode coursetitle Duration Tuition CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 12/1/2015 12/4/2015 Brockton, MA NorthEast Electrical - Brockton, MA

RS-FTHSEC FactoryTalk Historian SE Configuration and Data Collection 3.5 12/1/2015 12/4/2015 Linthicum, MD Rexel - Linthicum, MD Week of: December 7, 2015 coursecode coursetitle Duration Tuition CCCL21 Studio 5000 Logix Designer Level 3: Basic Ladder Logic Interpretation 2.0 12/8/2015 12/9/2015 Springboro, OH CBT Company - Springboro, OH CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 12/8/2015 12/9/2015 Sidney, OH FDL Automation - Sidney, OH CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 12/10/2015 12/11/2015 Springboro, OH CBT Company - Springboro, OH 12/10/2015 12/11/2015 Sidney, OH FDL Automation - Sidney, OH Week of: December 14, 2015 coursecode coursetitle Duration Tuition CCA182 PowerFlex 750 Series Configuration and Startup 2.0 12/15/2015 12/16/2015 Linthicum, MD Rexel - Linthicum, MD

CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 12/17/2015 12/18/2015 Linthicum, MD Rexel - Linthicum, MD Week of: January 4, 2016 coursecode coursetitle Duration Tuition CCV206 FactoryTalk View SE Maintenance and Troubleshooting 2.0 1/5/2016 1/6/2016 Linthicum, MD Rexel - Linthicum, MD Week of: January 11, 2016 coursecode coursetitle Duration Tuition CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 1/12/2016 1/15/2016 Sidney, OH FDL Automation - Sidney, OH PRS101 FactoryTalk Batch Project Design & Implementation 5.0 1/11/2016 1/15/2016 Brockton, MA NorthEast Electrical - Brockton, MA Week of: January 18, 2016 coursecode coursetitle Duration Tuition CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 1/19/2016 1/22/2016 Sidney, OH FDL Automation - Sidney, OH

CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 1/19/2016 1/20/2016 Linthicum, MD Rexel - Linthicum, MD CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 1/21/2016 1/22/2016 Linthicum, MD Rexel - Linthicum, MD Week of: January 25, 2016 coursecode coursetitle Duration Tuition CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 1/26/2016 1/29/2016 Springboro, OH CBT Company - Springboro, OH CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 1/25/2016 1/29/2016 Youngstown, OH Winkle Electric - Youngstown, OH OEM100 OEM: ControlLogix, FactoryTalk View ME, Kinetix 6000 and PowerFlex 40 5.0 1/25/2016 1/29/2016 Brockton, MA NorthEast Electrical - Brockton, MA Week of: February 8, 2016 coursecode coursetitle Duration Tuition

CCA182 PowerFlex 750 Series Configuration and Startup 2.0 2/9/2016 2/10/2016 Youngstown, OH Winkle Electric - Youngstown, OH CCA183 PowerFlex 750-Series Maintenance and Troublshooting 2.0 2/11/2016 2/12/2016 Youngstown, OH Winkle Electric - Youngstown, OH CCP153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting 4.0 2/9/2016 2/12/2016 Brockton, MA NorthEast Electrical - Brockton, MA CCV207 FactoryTalk View SE Programming 4.5 2/8/2016 2/12/2016 Linthicum, MD Rexel - Linthicum, MD SAF-LOG101 GuardLogix Application Development 2.0 2/10/2016 2/11/2016 Springboro, OH CBT Company - Springboro, OH SAF-LOG103 GuardLogix Maintenance & Troubleshooting 1.0 2/9/2016 2/9/2016 Springboro, OH CBT Company - Springboro, OH Week of: February 15, 2016 coursecode coursetitle Duration Tuition

CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 2/16/2016 2/19/2016 Youngstown, OH Winkle Electric - Youngstown, OH 2/16/2016 2/19/2016 Sidney, OH FDL Automation - Sidney, OH Week of: February 22, 2016 coursecode coursetitle Duration Tuition CCN144 Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP) Programming 4.0 2/23/2016 2/26/2016 Youngstown, OH Winkle Electric - Youngstown, OH CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 2/23/2016 2/26/2016 Springboro, OH CBT Company - Springboro, OH SI100 SI: Logix5000 Project Development and Basic Ladder Logic 4.0 2/23/2016 2/26/2016 Brockton, MA NorthEast Electrical - Brockton, MA Week of: March 7, 2016 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 3/7/2016 3/11/2016 Sidney, OH FDL Automation - Sidney, OH

Week of: March 14, 2016 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 3/14/2016 3/18/2016 Linthicum, MD Rexel - Linthicum, MD 3/14/2016 3/18/2016 Erie, PA Winkle Electric - Erie, PA Week of: March 21, 2016 coursecode coursetitle Duration Tuition CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 3/22/2016 3/23/2016 Youngstown, OH Winkle Electric - Youngstown, OH CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 3/24/2016 3/25/2016 Youngstown, OH Winkle Electric - Youngstown, OH CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 3/21/2016 3/25/2016 Brockton, MA NorthEast Electrical - Brockton, MA Week of: April 4, 2016 coursecode coursetitle Duration Tuition

CCPS43 SLC 500 & RSLogix 500 Maintenance & Troubleshooting 4.0 4/5/2016 4/8/2016 Sidney, OH FDL Automation - Sidney, OH Week of: April 11, 2016 coursecode coursetitle Duration Tuition CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 4/12/2016 4/15/2016 Linthicum, MD Rexel - Linthicum, MD Week of: April 18, 2016 coursecode coursetitle Duration Tuition CCP143 Studio 5000 Logix Designer Level 3: Project Development 4.0 4/19/2016 4/22/2016 Youngstown, OH Winkle Electric - Youngstown, OH Week of: May 2, 2016 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 5/2/2016 5/6/2016 Sidney, OH FDL Automation - Sidney, OH Week of: May 16, 2016 coursecode coursetitle Duration Tuition

CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 5/16/2016 5/20/2016 Youngstown, OH Winkle Electric - Youngstown, OH Week of: June 6, 2016 coursecode coursetitle Duration Tuition CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 6/7/2016 6/8/2016 Sidney, OH FDL Automation - Sidney, OH CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 6/9/2016 6/10/2016 Sidney, OH FDL Automation - Sidney, OH Week of: June 13, 2016 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 6/13/2016 6/17/2016 Linthicum, MD Rexel - Linthicum, MD Week of: August 15, 2016 coursecode coursetitle Duration Tuition CCP146 Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals 2.0 8/16/2016 8/17/2016 Linthicum, MD Rexel - Linthicum, MD

CCP151 Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming 2.0 8/18/2016 8/19/2016 Linthicum, MD Rexel - Linthicum, MD CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 8/15/2016 8/19/2016 Sidney, OH FDL Automation - Sidney, OH Week of: September 12, 2016 coursecode coursetitle Duration Tuition CCP299 Studio 5000 Logix DesignerLevel 1: ControlLogix Fundamentals and Troubleshooting 4.5 9/12/2016 9/16/2016 Brockton, MA NorthEast Electrical - Brockton, MA Week of: September 19, 2016 coursecode coursetitle Duration Tuition CCV204 FactoryTalk View ME & PanelView Plus Programming 4.0 9/20/2016 9/23/2016 Sidney, OH FDL Automation - Sidney, OH