ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROTARY DRILLING BITS AND DRILL STRING TOOLS

PUTTING YOUR SAFETY FIRST The mining industry continues to demand even higher levels of safety and productivity. In order to meet these requirements, we work continuously to develop even safer products, and to produce comprehensive manuals enabling for safer and effective use of our products. IT S ALL ABOUT EVERYONE S HEALTH Helping you to ensure a safe workplace and healthy workforce is of the utmost importance to us. The wellbeing of any person coming into contact with our equipment is paramount. Therefore, we strive to identify and assess potential risk factors that could threaten the health of you and your employees. All of the products in this catalogue are designed to meet safety requirements. Those responsible for equipment and parts installation must take care to ensure that all necessary steps have been taken to satisfy performance and safety requirements. This includes making sure that any applicable laws, regulations, codes and standards are followed. BE AWARE OF ALL SAFETY PROCEDURES We ask that you start by obeying all instructions given. Never work under an unsupported roof or close to potential pinch areas. Beware of the potential hazards of a loose roof and ribs, and scale down roof and ribs prior to bolting. It is important to bolt early in the mining process as soon as is safely and practically possible. Safe work procedures should incorporate inspection Before the machine operates, and also through regular monitoring based upon mining conditions, safety and hazard management systems. Workers should be provided with safety information, instruction and training on transportation, installation, operational care and disposal of drilling tools. and to produce comprehensive manuals on the safe and effective use of our products. DRESS RIGHT FROM HEAD TO TOE (PPE) at all times. This is what we strongly recommend, to help avoid injury: Safety helmet Hearing protection Safety glasses Protective high visibility clothing Respiratory protection Safety boots Any site-specific PPE as required MAKE A RISK ANALYSIS BEFORE YOU START Pay attention to safety when planning all of your work. Before you start, always take your time to go through all operations. Identify any potential risks and take appropriate measures to avoid them. If necessary, seek expert advice on how to help minimize risks. Finally, make sure that you have the right resources to perform all tasks in the safest manner possible. 2 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

TOGETHER WE WILL TAKE YOUR BUSINESS FURTHER For more than 150 years we have been committed to providing the highest-quality products and solutions to the mining industry. Our spirit and business ethics have remained unchanged, and developments within society and the industry have contributed to our innovative solutions. Today, we continue to conduct business in close cooperation with you and other customers all over the world, with the promise of being a proactive and innovative partner. We believe that we can make a difference to the successful running of your business. You need to get the best out of your equipment with no compromise on quality, delivery time or service. With us as partners, we will create solutions that make your operation run as effectively as possible. One thing is certain: our products and solutions will continue to meet the ever-growing needs of the mining industry, and your business. Today, the hallmark of great work is innovation and technology. Being second best is not an option for us. Sandvik was founded in 1862 by Göran Fredrik Göransson, who was the first in the world to succeed in using the Bessemer method for steel production on an industrial scale. ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 3

LINKING DRILL BIT TO DRILL RIG To drill a good hole, you need the right drill rig, drill string tools, and bits for your specific application, and you have to have them all working together. At Sandvik Mining we can offer your total drilling solution. We now have the broadest offerings in the industry, including premium quality drill pipe, rotary subs and adapters, stabilizers, deck bushings, shock subs, and of course rotary bits. As the world s premier supplier of roller cone bits, we provide products and expertise to improve drilling results across a full range from 159 to 406 mm holes (6 ¼ to 16 "). With both air and sealed bearing bit ranges, carbide grades and insert geometries with cutting structures optimized for all conditions, you can trust us to improve your drilling efficiency, keep the tools operating reliably, and offer high performance in all drilling applications. 4 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

Shock sub Top (spindle) sub starter pipe Premium drill pipe Rotary deck bushing Rotating roller stabilizer Rotary bit ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 5

WHATEVER YOUR RE DRILLING WE HAVE THE BIT FOR THE JOB SANDVIK BITS BUILT FOR ROCK BREAKING Choosing the correct drill bit is fundamental to successful and economical drilling. Important factors to consider include the rock compressive strength, abrasiveness, homogeneity, the desired penetration rate, the capabilities and characteristics of the drill rig, and previous drilling experience at the mine. SANDVIK ROLLER CONE BITS EXCEED THE LIMITS Sandvik roller cone bits are optimized for service life at the maximum possible penetration rate for the drilling conditions. Carbide grade, shape & size, and cutting structure density are selected to achieve the balance between productivity and bit life. There is never a compromise on quality. To achieve long life, the bearings must withstand the high axial and radial forces that are generated during drilling. The bearing design, geometry and material selection are critical factors that go into the development of new bits. PERFORMANCE FOR APPLICATION EXCELLENCE Superior air-cooled bearing performance is achieved from a bearing design that has advanced metallurgy, optimized proportioning of components and geometry. The RR221 air bearing bit range is powered by technology that continues to evolve to meet the demands of the surface mining industry. Enhancements include improved surface finishes, balanced radial and axial bearing loading, and optimized air flow for maximized cooling. Drill bits operate in an extremely tough environment and attention to detail is crucial. Such focus created our patented RR321 bit range with a new air bearing design. Changes to key internal features, combined with the closest tolerances we have ever put into an air bearing has resulted in performance increases from 15 to 30 % over the old RR320 design. The extra protection of the RR440 s patented radial shaped dual seal technology delivers extended bearing hours and greater reliability than conventional o-ring seals. The bearing s Kevlar coated excluder seal protects the primary seal from cuttings and debris, making the system virtually bulletproof. Plus the Phinodal bearing sleeves dramatically increase bit load and rotation speed capacities, increasing operational penetration rates and bit life in the most challenging of drilling environments. RR440 bearings have 50 % greater load capacity and routinely achieve over 200 % the bearing life of air bearings. MORE THAN JUST BITS We pride ourselves on being your total solutions provider and preferred partner of choice. In line with this value, our high performance drilling tools provide longer life and the lowest overall operating costs. Great performing products backed by our global reach of experienced and dedicated personnel make Sandvik the natural choice as your drill string components solutions provider. Sandvik offers a variety of services designed to improve your drilling process. These services include: Drilling performance audits and recommendations On-site support and services Drill rig audits including air, weight and rotation speed measurement Product selection and a staged plan of product development and improvement Dull bit evaluation Classroom training Performance feedback We are pleased to offer customers on site support including training for the appropriate use of all our products for your application. When you purchase our product you receive much more than a drill bit or a drill string tool. The Sandvik experience includes service and support during and after the sale. Although we have a global footprint, our service is local by design. Our sales and product specialists are stationed in your communities so we can understand your needs and deliver solutions efficiently and responsively. Your local Sandvik team is supported by application Drillmasters who work together with a focus to improve your drilling operation. 6 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 7

BITS OFFERING The RR221 series features a class-leading patented air bearing system that offers long service hours. The cutting structures are optimized to add key features for each application. The series incorporates all of Sandvik s design, manufacturing and materials expertise to provide high quality and reliable performance. RR221 AVAILABILITY SELECTION CHART Softest Formation Most Aggressive Bit CUTTING STRUCTURE TYPE Hardest Formation Least Aggressive Bit BIT SIZE mm inch APPROX. WT. kg / lb X05 X07 X10 X20 X30 X40 X47 X50 X60 X70 159 6 ¼" 20 / 44 X 171 6 ¾" 22 / 49 X X X X 187 7 ⅜" 25 / 56 X 200 7 ⅞" 35 / 77 X X X X X X X 216 8 ½" 36 / 80 X X X X 229 9" 43 / 94 X X X X X 251 9 ⅞" 59 / 130 X X X X X 270 10 ⅝" 67 / 148 X X X X X 311 12 ¼" 98 / 216 X X X X X X The RR321 bearing system has evolved from one of the best performing air bearing bits in the surface mining industry. Because these bearings are capable of longer operating hours, our engineers have applied a systems approach to the drill bit technology. Additional features are present on these bits to maximize life and operational penetration rates in challenging environments. RR321 AVAILABILITY SELECTION CHART Softest Formation Most Aggressive Bit CUTTING STRUCTURE TYPE Hardest Formation Least Aggressive Bit BIT SIZE mm inch APPROX. WT. kg / lb S07 S10 S15 S17 S20 S30 S35 S40 S47 S50 S60 S70 171 6 ¾" 22 / 49 X X 200 7 ⅞" 35 / 77 X X X X X X 216 8 ½" 36 / 80 X X 229 9" 43 / 94 X X X X X X 251 9 ⅞ 59 / 130 X X X X X X X X 270 10 ⅝" 67 / 148 X X X X X X X 311 12 ¼" 98 / 216 X X X X X X 349 13 ¾" 133 / 294 X X X X 381 15" 184 / 406 X X 406 16" 213 / 470 X X X 8 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

The RR440 series is the only commercialized no-service-required sealed journal bearing blasthole bit designed for surface mining. It is powered by Charger bearing technology. To maximize the RR440 s bearing performance we created a system of features that harness the latest in material science, engineering, and manufacturing technology. That s why the RR440 series of roller cone bits has for 15 years, been the benchmark for drilling excellence, and remains that today RR440 AVAILABILITY SELECTION CHART BIT SIZE mm inch Softest Formation Most Aggressive Bit CUTTING STRUCTURE TYPE APPROX. WT. kg/lb 07QX2 17QX2 20QX2 25QX2 30QX2 35QX2 37QX2 39QX2 40QX2 45QX2 50QX2 60QX2 70QX2 171 6 ¾ 22 / 49 X X 200 7 ⅞ 35 / 77 X X X 229 9 43 / 94 X X X X X 251 9 ⅞ 60 / 130 X X X X X X X X 270 10 ⅝ 67 / 148 X X X X X X X X X 311 12 ¼ 98 / 216 X X X X X X X 349 13 ¾ 133 / 294 X X X X 406 16 213 / 470 X X Hardest Formation Least Aggressive Bit Note: 1. Working ranges of bit types overlap, please consult your Sandvik product specialist for recommendations. 2. Different carbide grades are available on many of these bits, please consult your Sandvik product specialist for recommendations. 3. The sizes and types listed in the table above reflect the standard bits that were available at the time we published this brochure. Because we are continually adding new bit sizes and types to our product line, please consult with your Sandvik representative for the most current offerings. ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 9

BENEFITS BY APPLICATION INTERIOR ROW INSERTS Interior row inserts are critical for high bit life and sustained penetrations rates. We select the best inserts for your application specific products. RR221 RR321 RR440 Chisel TCI (tungsten carbide insert) provides durability and faster cutting action for soft and medium-soft formations. The unique geometry of the vector shaped interior row inserts attack the rock at the angle of cone rotation to maximize insert penetration in soft and medium-soft formations Sculptured inserts increase the strength by increasing cross-sectional area and by eliminating sharp edges that cause stress risers which can lead to insert breakage. Ideal for soft and medium-soft formations. Tough conical top inserts in hard rock formations and abrasive rock conditions have a geometrical shape that optimizes both strength and wear resistance. GAGE ROW INSERTS We offer a range of gage row insert shapes suited to all drilling applications. Insert selection is optimized for all bits in our product range. RR221 RR321 RR440 The chisel gage insert performs well in soft homogenous drilling conditions. Radial Bow chisel is a good choice in soft to medium-soft formations. The crest geometry of QX gage inserts present a large cross-sectional area to the rock, creating large bottom-hole craters at the bit gage maximzing life and penetration rates. The SWIC shape coupled with proprietary TCI grades increases gage contact in medium hard abrasive drilling conditions. Ollon, double conical and relief gage SWIC are shapes for medium-hard to hard formations. Conical inserts offer both strength and wear resistance in hard, abrasive rock. PATENTED TRUCUT GAGE CUTTING TECHNOLOGY Trucut gage cutting technology uses a combination of SRT semi-round top inserts on the gage, and patented off gage inserts. These inserts cut the wall more efficiently, minimizing breakage and extending bit life and penetration rates. RR221 RR321 RR440 Trucut gage cutting technology 10 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

HEEL ROW CUTTING AND REAMING TECHNOLOGY A range of heel row configurations are available depending on the bit design and application. These reduce gage wear and extend bit life. RR221 RR321 RR440 Standard Shot-gunned Dual Heel Standard Shotgunned Dual heel row PATENTED AIR-BEARING TECHNOLOGY Patented air bearing technology is optimized for high hours and maximum durability by using advanced materials and metallurgy. This yields higher load capacity, longer bit life, and lower cost per meter drilled. RR221 RR321 RR440 Patented Air Bearing REMOVABLE AIR TUBES Non-metallic removable air tubes allow cleaning of formation from the air passages, if needed. This extends bit life and reduces costs. RR221 RR321 RR440 Non-metallic removable air tubes BACKFLOW VALVES Backflow valves act as a check valve limiting ingress of water and cuttings to the bit body. This increases bearing life and reduces the incidences of bearing failure. Open Backflow Valve Closed Backflow Valve RR221 RR321 RR440 Back Flow Valve ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 11

BENEFITS BY APPLICATION CONE WEAR PROTECTION, PATENTED RIDGE CUTTER TECHNOLOGY Cone wear protection and patented ridge cutter technology are used to prevent excessive cone erosion and remove un-cut rock ridges. (Not available on all bits.) RR221 RR321 RR440 Patented process applies special material to minimize cone wear. Ridge cutter cuttters are rows of small diameter inserts positioned between the inserts inbetween the main cutting inserts. LEG AND SHIRTAIL PROTECTION Leg protection can be customized to drilling conditions, extending bit life and increase your productivity. 3 /3 leg protection is designed for drilling wet and or dirty hole conditions where unstable hole conditions require backreaming. RR221 RR321 RR440 The RR220 and RR321 offer a standard ⅓ leg and shirtail protection feature with optional ⅔ and 3 /3 leg protection. The RR440 also offers 3 /3 leg protection for maximum performance in challenging conditions. 1/3 2/3 3/3 LEG DESIGN FOR MAXIMUM HOLE CLEANING Asymetrical design of leg forgings protects the key bit components and allows for improved bailing of drill cuttings. Combined with the preferential orientation of the nozzles, results in highly efficient bottom hole cleaning, increasing your bit life and penetration rates. RR221 RR321 RR440 Asymetrical leg design. 12 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

PATENTED CHARGER QX2 DUAL-SEAL BEARING TECHNOLOGY The patented QX2 bearing uses dual seal technology combined with Phinodal bearing sleeves to dramatically increase weight and rotation speed capacities. Kevlar coated excluder seal protects the primary seal from cuttings and debris, making this system virtually bulletproof. The QX2 bearing delivers class leading bearing performance, allowing drillers to to apply more weight and drill faster, lowering your total drilling costs. Patented Charger QX2 Dual Sealed Bearing RR221 RR321 RR440 PIN VENT PRESSURE COMPENSATION SYSTEM The pin vent pressure compensation system equalizes the internal bit pressure and external ambient pressure to prevent the ingress of cuttings and loss of lubricant. This optimizes seal life, extends bit life, and reduces your downtime. Pin Vent pressure compensation system RR221 RR321 RR440 OPTIMIZED SEAL CLEANING SYSTEM A unique backflow valve system combined with air tubes for seal cleaning prevent the ingress of cuttings and water, keeping the seal clean, maximizing bit life. Optimized seal cleaning system with backflow valve RR221 RR321 RR440 ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 13

CUTTING SELECTION GUIDE SHALE, SILTSTONE SANDSTONE LIMESTONE, DOLOMITE GNEISS SLATE GRANITE, MARBLE BASALT STEPS 1. Locate ROCK COMPRESSIVE STRENGTH value. 2. Move vertically down to the FORMATION DESCRIPTION LINE that best describes the rock formation. 3. Move horizontally across to the ROCK BIT TYPE. NOTE For faster drilling, use the next smaller bit number. If insert breakage is encountered, use the next larger bit number. EXAMPLE Rock compressive strength 35,000 pounds per square inch and rock breaks easily a S40 rock bit type is the best first selection. DIABASE DIORITE, GABBRO, QUARTZITE RHYOLITE, TACONITE, BANDED IRON FORMATIONS 0 69 138 207 276 345 414 483 MPa 0 703 1406 2109 2812 3515 4218 4921 kg/cm 2 0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 psi ROCK STRENGTH (UCS*) FASTEST DRILLING RR221 RR321 RR440 X07 X10 X20 S07 S10S15 S17 S20 S30 07QX2 10QX2 17QX2 20QX2 25QX2 ROCK BREAKS EASILY HOMOGENOUS MATERIAL ROCK BREAKS MODERATELY EASILY BROKEN FORMATION OR SEMI-ABRASIVE ELASTIC CHARACTERISTICS, VERY ABRASIVE ROCK BREAKS WITH DIFFICULTY X30 X47 X50 S40 S47 S50 30QX2 35QX2 37QX2 40QX2 45QX2 39QX2 50QX2 FORMATION DESCRIPTION LINES X60 X70 S60 S70 59QX2 60QX2 70QX2 * Unconfined Compressive Strength SLOWEST DRILLING 14 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 15

SPECIFICATIONS RR321/ RR221 GUIDELINES FOR WEIGHT-ON-BIT AND ROTATION SPEED* BIT SIZE mm (inches) WOB/RPM X05 X07/S07 X10/S10 S15 S17 X20/S20 171-187 (6 4/3" - 7 3/8") 200-229 (7 7/8" - 9") 251-279 (9 7/8" - 11") lb (1 000's) 8-16 tonnes 4-7 rpm 80-150 lb (1 000's) 8-16 8-16 10-24 12-33 12-33 12-33 tonnes 4-7 4-7 5-11 5-15 6-15 6-15 rpm 90-160 90-160 80-150 80-150 80-150 80-150 lb (1 000's) 10-24 13-27 13-33 18-45 tonnes 5-11 6-12 6-15 8-21 rpm 80-150 80-150 80-140 80-130 311-349 lb (1 000's) 15-38 21-80 (12 1/4" - 13 3/4") tonnes 7-17 9-36 381-406 (15" - 16") rpm 80-150 70-120 lb (1 000's) tonnes rpm * Consult with your Sandvik representative for the best operating parameters for your site conditions. RR440 GUIDELINES FOR WEIGHT-ON-BIT AND ROTATION SPEED* BIT SIZE mm (inches) WOB/RPM 07QX2 17QX2 20QX2 25QX2 30QX2 35QX2 171 to 187 (6 4/3" - 7 3/8") 200 to 229 (7 7/8" - 9") 251 to 279 (9 7/8" - 11") lb (1 000's) 10-40 tonnes 4-18 rpm 75-120 lb (1 000's) 9-30 14-37 14-37 14-39 tonnes 4-14 6-17 6-17 6-18 rpm 90-160 80-150 80-150 80-130 lb (1 000's) 14-37 20-50 20-50 20-55 20-60 25-70 tonnes 6-17 9-22 9-22 9-25 9-27 11-31 rpm 80-160 80-150 80-130 80-130 70-120 70-120 lb (1 000's) 25-80 25-85 311 to 349 tonnes (12 1/4" - 13 3/4") 11-36 11-38 rpm 75-125 70-120 381 to 406 (15" - 16") lb (1 000's) tonnes rpm * Consult with your Sandvik representative for the best operating parameters for your site conditions. 16 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

X30/S30 S35 X40/S40 X47/S47 X50/S50 X60/S60 X70/S70 10-33 12-42 12-42 20-45 5-15 5-19 5-19 9-21 75-120 60-110 60-110 60-100 16-35 20-40 20-40 20-50 25-57 25-57 7-16 9-18 9-18 9-23 11-26 11-26 75-120 70-110 60-110 60-110 60-100 60-100 18-50 22-57 25-65 25-80 25-85 8-23 10-26 11-30 11-36 11-39 75-120 60-110 60-110 60-90 60-90 23-80 27-85 27-85 27-85 40-110 40-110 10-36 12-38 12-38 12-38 18-50 18-50 70-120 60-110 60-110 60-110 60-90 60-90 30-90 40-100 50-120 14-41 18-44 23-54 75-120 60-100 60-80 37QX2 39QX2 40QX2 45QX2 50QX2 60QX2 70QX2 18-47 8-21 60-110 20-50 20-65 20-65 9-23 9-30 9-30 60-120 60-100 60-100 25-75 30-85 35-85 40-95 40-100 11-34 14-38 16-38 18-43 18-45 65-110 65-110 60-100 60-90 60-90 27-85 28-100 28-100 28-100 40-110 50-120 12-38 13-44 13-44 13-44 18-50 23-54 70-120 65-110 60-110 60-110 60-90 60-90 40-120 50-130 18-54 23-58 70-110 60-100 ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 17

THE RIGHT DRILL STRING FOR ALL YOUR NEEDS SANDVIK ROTARY DRILLING TOOLS ENGINEERED FOR EFFICIENCY Our rotary drill string products and services are specifically designed for maximizing your productivity and minimizing operational costs. With longer tool service life, downtime is reduced, thereby improving your productivity. HIGH PERFORMANCE FOR APPLICATION EXCELLENCE Our products are engineered to efficiently handle the hard rock and abrasive formations commonly found in surface mines. Built to withstand extreme torsional and axial loads, Sandvik drill string components are manufactured with premium quality materials and undergo rigorous product testing. Sandvik offers significant advantages in its high performance drill string components: Extensive in-house materials and reliability engineering expertise Leading technology and intellectual property developments State-of-the-art manufacturing Efficient and reliable delivery times Certified quality process A thorough understanding of drilling and applications HIGH QUALITY ASSURANCE STANDARDS We are committed to the highest quality standards in our manufacturing process, resulting in superior products. Our Quality Assurance program utilizes raw material traceability. In addition, the highly skilled product specialists at our manufacturing facility conduct thorough inspections and test each product to assure we deliver superior quality products to our customers. Critical factors in Sandvik drill string component development and manufacturing include: Stringent material specifications and verification Welding process control and ultrasonic weld inspection Precise pipe straightness specifications and verification MATERIALS AND RELIABILITY TESTING We have materials and reliability labs at key locations around the world. Materials and reliability engineers are industry leading experts in the areas of materials and the science of maximizing product reliability. Our experts work closely to identify optimum material properties and ensure quality standards. As a result, you receive a full range of high performance drilling tools. 18 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

DRILL PIPE ROTARY HEAD CONNECT TO DRILLED HOLE SANDVIK DRILL PIPE DESCRIPTION The drill pipe transmits extreme torsional and axial loads to the drilling tools. Because it encounters various abrasive and hardness conditions, the drill pipe s durability and reliability are crucial to the drilling operation. Sandvik drill pipes are manufactured to the highest quality assurance standards using an optimized combi nation of design, tube quality and hard facing materials. They are available in a wide variety of lengths to meet your specific drilling application: Rotary drill pipe Down-the-hole hammer drill pipe Kelly pipe 76-340 mm (3" - 13 ⅜") outer diameter (OD) 0,91-18,3 m (3-60 ) lengths BENEFIT Complete product traceability High durability Versatility in various pipe sizes SEAM-LESS TUBING DESCRIPTION Sandvik drill pipe bodies are manufactured from premium quality, heat treated seamless tubing. Sandvik offers a range of high quality material grades to optimize your applications BENEFIT An optimum combination of tube quality and hard facing material The best value grades for specific applications RP416 & RP412 DESCRIPTION The RP416 series ultra premium grade pipe is a special heat-treated and quenched alloy. It is designed for hard abrasive formations that cause the body of the pipe to wear out before the tool joints. The physical characteristics, yield, tensile and Brinell hardness of this alloy tube provide more durable, wear resistant mid-body tube than a standard, hot rolled, seamless carbon tube. Sandvik s RP412 series premium grade pipe is typically required in non-abrasive formations when the tool joints wear out before the tube. The RP412 series is a ST52 hotrolled, seamless carbon tube. BENEFIT RP416 More durable Wear resistant mid-body tube RP412 Typically for non-abrasive formations Premium wear quality ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 19

TOOL JOINTS DESCRIPTION Sandvik tool joints are manufactured from premium grade or modified heat treated material for maximum wear resistance and life. The tool joints are fitted to the tube body using a proprietary processs that ensures concentricity and axial alignment. BENEFIT Fast make-up of drill bit to pipe Better seating of threads due to accuracy of axial alignment HARD MATERIAL WEAR PROTECTION (OPTION) DESCRIPTION Based on your application, hard material wear protection can prove to be a cost-effective option when applied either radially or axially on the tool joints as well as the lower portion of the tube BENEFIT Better wear on tool joints Longer component life DRILL PIPE AVAILABILITY SELECTION CHART This selection guide recommends pipe grades appropriate for various rock hardness and abrasiveness. It also suggests conditions for applying optional hard facing material. Consult your Sandvik product specialist for specific recommendations for your drilling application. SUGGESTED USE OF HARD FACING MATERIAL HARDEST ROCK LEAST ABRASIVE MOST ABRASIVE SPECIAL ALLOY ULTRA PREMIUM RP416 SERIES PREMIUM RP412 SERIES SOFTEST ROCK SUGGESTED USE OF HARD FACING MATERIAL 20 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

SANDVIK BLASTHOLE DRILL PIPE SIZES (O.D.) OUTER DIAMETER WALL THICKNESS TUBE WEIGHT PIN BOX SET APPROX. WEIGHT RECOMMENDED CONNECTIONS SUGGESTED BIT SIZE RANGE mm in mm in kg/m lb/ft kg lb 101.6 4 12.7 ½ 28 19 27.2 60 2 ⅜" API REG - API IF 4 ⅝" through 5 ⅛" 114 4 ½ 7.33 5 /16 19 13 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 4 ⅝" through 5 ⅛" 114 4 ½ 12.7 ½ 31 21 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 5 ⅝" through 6 ¼" 114 4 ½ 19.05 ¾ 45 30 59 130 3 ½" API REG - 2 ⅞" API IF - 3" BECO 5 ⅝ through 6 ¼ 127 5 19.05 ¾ 51 34 72.6 160 3 ½" BECO 5 ⅝" through 6 ¼" 139.7 5 ½ 19.05 ¾ 57 38 81.6 180 3 ½" BECO 6 ¼" through 6 ¾" 152.4 6 19.05 ¾ 63 42 108.9 240 4" BECO 6 ¾" through 7 ⅞" 152.4 6 25.4 1 79 53 108.9 240 4" BECO 7 ⅜" through 7 ⅞" 158.75 6 ¼ 19.05 ¾ 65 44 113.4 250 4" BECO 7 ⅜" through 7 ⅞" 165.1 6 ½ 19.05 ¾ 68 46 124.7 275 4 ½" BECO 7 ⅜" through 7 ⅞" 165.1 6 ½ 25.4 1 88 59 124.7 275 4 ½" BECO 7 ⅞" 177.8 7 19.05 ¾ 74 50 152 335 4 ½" BECO - 5 ¼" BECO 7 ⅞" 177.8 7 25.4 1 95 64 152 335 4 ½" BECO - 5 ¼" BECO 9" 193.67 7 ⅝ 22.2 ⅞ 94 63 181.4 400 5 ¼" BECO 9" 193.67 7 ⅝ 25.4 1 106 71 181.4 400 5 ¼" BECO 9" through 9 ⅞" 219 8 ⅝ 25.4 1 122 82 235.9 520 6" BECO 9" through 9 ⅞" 219 8 ⅝ 38.1 1 ½ 170 114 235.9 520 6" BECO 9 ⅞" through 11" 235 9 ¼ 25.4 1 131 88 267.6 590 6" BECO 9 ⅞" through 11" 235 9 ¼ 38.1 1 ½ 185 124 267.6 590 6" BECO 10 ⅝" through 11" 273 10 ¾ 25.4 1 155 104 340.2 750 8" BECO 10 ⅝" through 11" 273 10 ¾ 31.7 1 ¼ 189 127 340.2 750 8 BECO 12 ¼" through 13 ¾" 273 10 ¾ 38.1 1 ½ 220 148 340.2 750 8" BECO 12 ¼" through 13 ¾" 324 12 ¾ 25.4 1 189 127 585.1 1290 8" BECO 13 ¾" through 15" 340 13 ⅜ 31.7 1 ¼ 243 163 635 1400 10" BECO 15" through 17 ½" 340 13 ⅜ 38.1 1 ½ 286 192 635 1400 10" BECO 15" through 17 ½" ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 21

HIGH PERFORMANCE DRILL STRING TOOLS ROTARY SUBS AND ADAPTER DESCRIPTION Sandvik offers a full range of rotary subs and adapters for any drilling needs. Subs are used to connect the various components throughout the entire drill string from the drill bit to the rotary head. They provide a variety of functions such as changing from one thread form to another (cross-over subs), or reducing wear to the threads of components (thread-saver subs). Using special alloy material all subs and adapters are manufactured to the same high quality standards as Sandvik drill pipe. Sandvik rotary subs are available as bit (bottom) subs, top (spindle) subs, cross-over subs and thread-saver subs. BENEFIT Optimum hard material wear protection on bit subs Hard face material in the 58 to 60 Rockwell C range Hard facing available on all subs (option) ROTARY SUBS AND ADAPTER DESCRIPTION RP424 welded blade stabilizers are commonly used to stabilize and control hole deviation. Sandvik stabilizers provide smoother bores and faster penetration rates due to more efficient bit performance. The RP424 welded blade stabilizer offers an integral welded blade design with no moving parts, and a specialized tungsten carbide pad design. Its specific gage tolerances optimize performance and extend bit life. The RP424 is available in a wide selection for various hole and drill string sizes including 3 to 4 blades, and straight or spiral blades. RP427 rotating roller stabilizers provide more reaming and cutting action than a welded blade stabilizer. The RP427 incorporates Sandvik s tungsten carbide inserts, which are resistant to breakage, provide more effective cutting action, and result in more durable life. For maximum rate of penetration, partner the RP427 with Sandvik s roller cone bits. The RP427 roller stabilizer uses the largest possible diameter rollers and bearings that are practical for a specified hole size. This increases the life of the stabilizer as compared to stabilizers with small rollers and bearings. BENEFIT RP424 Minimizes rough bores, spiral bores, ledges, and crooked holes Provides smoother bores to minimize particles in hole bottom and reduce re-drill time Best for soft to medium formations in wet or dry conditions RP427 Eliminates scraping and gouging of guiding elements Maintains concentricity Provides adequate stabilization without imposing excessive torque Best for hard and abrasive formations in areas that include broken ground, creating hole wall instability or undergage hole conditions 22 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

DECK BUSHINGS DESCRIPTION Deck bushings centralize the drill pipe over the hole, prevent misalignment of the bit and drill string, and extend the life of the bit and drill string. Sandvik deck bushings are engineered to run smoothly and provide extended trouble free operation. Specialty high alloy, heat treated material is used throughout the entire deck bushing line. RP432 is a static, non-rotating type deck bushing that has a solid body with no moving parts and replaceable wear sleeves. The sleeves are tack welded into place and are replaced as the sleeves wear. This type of deck bushing is normally used when the drilling application is down-the-hole (DTH). The DTH s application does not require the rpms that are seen in rotary drilling applications. The RP432 static deck bushing is not suggested for use when rotary drilling. RP434 rotary deck bushing is designed with triple race ball bearings, allowing the inner sleeve to rotate as the drill pipe passes through it. This results in less vibration, torque and drill pipe diameter gouging and scraping as compared to a static fixed-type deck bushing. BENEFIT RP432 High alloy, heat treated materials provide longer service life Available for all makes and models of drill rigs RP434 Triple race ball bearing design ensures smoother, longer bearing life Transmits less vibration through the drill string to the rotary head Smooth and quiet drill cab atmos phere More cost effective than static bushings SHOCK SUBS DESCRIPTION RP442 shock subs are designed to lower drilling vibrations and prevent them from being transmitted into the rotary drill head and drill bit in mid-size to large drilling rigs. Sandvik s Material and Reliability engineers extensive research efforts have resulted in optimum materials selection to ensure premium performance, durability and long life RP442 shock subs use a series of rubberized elements, torsional blocks, and springs to absorb maximum torsional shock while cushioning the axial loads. These shock subs help reduce or eliminate premature rotary head failure, mast fractures, and poor bit life. The end results are lower maintenance costs, improved bit life, and smoother operating conditions. BENEFIT RP422 Shock sub Reduces drill rig mast maintenance Provides smoother on-bottom running Extends bit life Lowers rotary drive head repairs ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 23

BIT SUBS PIN CONNECTION OUTER DIAMETER (OD) STANDARD LENGTH SUB WEIGHT WEIGHT PER UNIT inch mm inch mm inch lbs kgs lbs/ft kgs/m 2 ⅜ API REG 89 3 1/2 457 18 45 20 30 45 2 ⅜ API REG 102 4 457 18 60 27 40 60 2 ⅞ IF 114 4 ½ 457 18 70 32 46 69 3 ½ API REG 114 4 ½ 610 24 97 44 48 71 3 ½ API REG 127 5 610 24 122 55 61 91 3 ½ BECO 127 5 610 24 117 53 59 88 3 ½ BECO 140 5 ½ 610 24 145 66 73 109 4 or 4 ½ BECO 159 6 ¼ 610 24 176 80 88 131 4 or 4 ½ BECO 165 6 ½ 610 24 194 88 97 144 4 ½ BECO 178 7 610 24 230 104 115 171 5 ¼ BECO 191 7 ½ 610 24 270 123 134 199 5 ¼ BECO 194 7 ⅝ 781 30 ¾ 344 156 134 199 6 BECO 219 8 ⅝ 781 30 ¾ 434 197 170 253 6 BECO 235 9 ¼ 813 32 531 241 200 298 7 BECO 245 9 ⅝ 889 35 628 285 215 320 8 BECO 273 10 ¾ 889 35 743 337 255 380 8 BECO 311 12 ¼ 1067 42 1215 551 347 768 10 BECO 324 12 ¾ 1067 42 1308 593 374 557 10 BECO 340 13 ⅜ 1067 42 1462 663 418 622 STABILIZERS HOLE SIZE BODY DIAMETER STANDARD LENGTH RP424 RP427 mm inch mm inch mm inch lbs kgs lbs kgs 159 6 ¼ 127 5 673 26 ½ 144 65 130 59 172 6 ¾ 140 5 ½ 673 26 ½ 210 95 163 74 199 7 ⅞ 159-178 6 ¼ - 7 673 26 ½ 250 113 220 100 229 9 194 7 ⅝ 724 28 ½ 350 159 290 132 250 9 ⅞ 219 8 ⅝ 781 30 ¾ 470 213 400 181 270 10 ⅝ 219-235 8 ⅝ - 9 ¼ 781 30 ¾ 520 236 460 209 279 11 235-245 9 ¼ - 9 ⅝ 781 30 ¾ 580 263 510 231 311 12 ¼ 273 10 ¾ 781 30 ¾ 790 358 650 295 349 13 ¾ 311 12 ¼ 1041 42 1130 513 1030 467 381 15 340 13 ⅜ 1041 42 1540 699 1350 612 DECK BUSHINGS OD NOMINAL RP432 STATIC WEIGHT RP434 ROTARY WEIGHT TYPICAL PIPE OD TYPICAL BIT DATA mm inch lbs kgs lbs kgs mm inch mm inch 191 7 ½ 55-110 25-50 50-105 23-48 102-114 4-4 ½ 121-165 4 ¾ - 6 ½ 254 10 90-165 41-75 85-160 39-73 114-178 4 ½ - 7 143-229 5 ⅝ - 9 279 11 140-170 64-77 135-165 61-75 138-178 5 ½ - 7 171-229 6 ¾ - 9 305 12 125-155 57-70 120-150 54-68 152-178 6-7 187-229 7 ⅜ - 9 330 13 150-225 68-102 145-220 66-100 178-235 7-9 ¼ 229-279 9-11 381 15 170-330 77-150 160-320 73-145 194-273 7 ⅝ - 10 ¾ 229-311 9-12 ¼ 406 16 195-360 89-163 185-350 84-159 219-273 8 ⅝ - 10 ¾ 251-311 9 ⅞ - 12 ¼ 438 17 ¼ 360-400 163-181 350-390 159-177 273-340 10 ¾ - 13 ⅜ 311-406 12 ¼- 16 483 19 460-510 209-231 450-500 204-227 311-340 12 ¼ - 13 ⅜ 349-406 13 ¾ - 16 Approximate weight. Actual depends on inside diameter of deck opening. 24 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

RECYCLING THAT PAYS OFF FOR YOU Environmental considerations are crucial in all of our operations, and never more so than when it comes to the recycling of cemented carbide. The global shortage of raw material has inspired us to create an extensive scrap-recycling program. We recognize today s increasing environmental concerns, and we are the only mining company that recycles both steel and cemented carbide. In fact, we have been collecting and recycling both scrap and discarded drilling consumables for conversion back into basic raw materials for almost 10 years. A large number of customers have joined our recycling program during this period. One major reason for this is that we make it easy for them to recycle, by collecting scrap from their own premises. All of our customer service centres are now set up to Receive used cemented carbide-enhanced products. Our recycling plant in Chiplun, India complies with the most stringent environmental standards, and is certified to the ISO 14001 and OHSAS 18001 (ISO 45001) international standard. WHAT WE OFFER: Recycling of cemented carbide available worldwide Sustainable recycling process with low environmental impact Cost recovery and reduced waste disposal for you Money received for worn tools can purchase new inserts or finance new tooling projects Consumables and tools from all manufacturers are accepted A win-win situation for all Adopting sustainable business practices and handling them in the right way is a foundation that contributes across the entire business value chain. The whole supply chain will be improved by incorporating recycling into the business process. For instance, our recycling process significantly reduces energy consumption and carbon dioxide emissions, thereby reducing environmental impact. ROTARY DRILLING BITS AND DRILL STRING TOOLS Sandvik Mining 25

PERFORMANCE TIPS ROTARY DRILLING - BEST PRACTICE CHECKLIST 1. Always make up and break out bits carefully. 2. Only grease the bottom ⅓rd of bit or pipe threads. 3. Internal bit air pressure should be 35-40 PSI. 4. Always break in a new bit by drilling at a reduced weight and rotation for the first hole. 5. To collar or start a new hole, reduce down pressure and rotation speed. 6. Always switch on the bailing air before the bit starts drilling the hole and keep the air on until the bottom of the collar is reached. 7. Re-establish the bottom hole pattern with reduced down pressure and rotation when drilling is interrupted. 8. Never drill an old hole with a new bit. This can pinch the cones, damaging the bearings and prematurely destroying the bit. 9. As rock hardness increases, decrease rotary speed and increase down pressure. 10. In softer rock, use lower down pressure and higher rotary speeds. 11. Do not use more water than is necessary to control dust and maintain the hole wall condition. 12. Maintain rotation and bailing air while tripping into or out of a hole. 13. Near bit stabilization, deck centralizers, and shock subs can help bit life and drill longevity. Keep these tools in good condition to maximize performance and replace promptly when worn out. 14. Always clean, dry and lubricate a bit before an idle period and ensure the cones turn freely. 15. Before reusing a bit that has been idle, make sure all cones turn freely. 16. Bent drill steel will reduce drill bit life. 17. Record accurate drill data and note drilling issues. This information can be used to develop improved drilling tools. THREAD GREASE Use Sandvik thread grease on all threaded connections to extend thread life and prevent galling, corrosive conditions and difficulty breaking connections. WEIGHT (kg) PART NO. Can 4,5 795-1960 Can 18 795-1961 Low temp. Can 18 795-1963 Barrel 50 795-1967 EXAMPLE OF MARKING BITS Sometimes our part numbers and serial numbers are confused which can lead to poor data capture. Below is an example of typical pin stamping with the key details identified. 4. 3. 1. Serial number - H029186036 2. Part number - 0038199-02 3. Type - S07 4. Size - 9 1. 2. 26 Sandvik Mining ROTARY DRILLING BITS AND DRILL STRING TOOLS

IMPORTANT HEALTH AND SAFETY INFORMATION MATERIAL COMPOSITION Most hardmetal products contain tungsten carbide and cobalt. ROUTES OF EXPOSURE Grinding or heating hardmetal blanks or hardmetal products will produce dusts or fumes with dangerous ingredients that can be inhaled, swallowed or come in contact with the skin or eyes. ACUTE TOXICITY The dust is toxic by inhalation. Inhalation may cause irritation and inflammation in the airways. Skin contact can cause irritation and rash. Sensitized persons may experience an allergic reaction. PRECAUTIONARY STATEMENTS Do not breathe dust. Wear protective gloves/protective clothing/eye protection. In case of inadequate ventilation wear respiratory protection. Avoid release to the environment. IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. CHRONIC TOXICITY Repeated inhalation of aerosols containing cobalt may cause obstruction in the airways. Prolonged inhalation of increased concentrations may cause lung fibrosis or lung cancer. Cobalt is potent skin sensitizer. Repeated or prolonged contact can cause sensitization. CLASSIFICATION Following hazard classification according to GHS/CLP applies to the hardmetal powder (3 % Co<10 %): Acute Inhalation 3, H331: Toxic if inhale.d Carcinogenicity 1B, H350i, May cause cancer by inhalation. Repr. 2, H361f; Suspected of damaging fertility. STOT RE 1, H372: Causes damage to lungs through prolonged or repeated exposure by inhalation. Resp. Sens. 1B, H334 : May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Sens.1, H317: May cause an allergic skin reaction. Aquatic Acute 1, H400: Very toxic to aquatic life. Aquatic Chronic 2, H411: Toxic to aquatic life with long lasting effects.

MINING.SANDVIK.COM C1-760ENG Sandvik Mining 2015 SANDVIK is registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.