Welcome to BGH We are EXCELLENCE in Specialty Steel! Six production sites in Germany and Poland. Worldwide service through regional sales offices and distribution partners. Sustainability through continuous investments and long-term partnerships. 20.000 t in over 70 grades in stock Sales: Turnover: 180.000 t 548 million
More than 500 years of experience 1467 - BGH (BoschGotthardsHütte) first mentioned as Hammer an der Ferndorf (just outside the city of Siegen) Boschgotthardshütte former times Forge driven by hydropower Specialty Steel Forgings focus of the company for hundreds of years
History 1467 Boschgotthardshütte was founded by Gotthard Busch 1927 SCHLEIFENBAUM + CIE GmbH Boschgotthardshütte was established 1934 Otto Breyer took over SCHLEIFENBAUM + CIE GmbH Boschgotthardshütte 1966 Purchase of a foundry, change into a steel mill ( Eintracht works) 1991 Acquisition of the forge shop from Chemiewerk Leuna 1993 Acquisition of VEB Edelstahlwerk 8. Mai 1945 Freital 1993 Acquisition of VEB Präzisionszieherei und Maschinenfabrik Lugau 1998 Relocation of BGH Edelstahl Leuna GmbH to Lippendorf, renamed to BGH Edelstahl Lippendorf GmbH 2002 Acquisition of RSH-Drahtzieherei GmbH 2004 Acquisition of Huta Baildon by BGH Polska Sp.z.o.o
Company structure BGH Edelstahlwerke GmbH 2.077 employees BGH Edelstahlwerke GmbH (Holding) 173 employees BGH Edelstahl Freital GmbH BGH Edelstahl Siegen GmbH BGH Edelstahl Lugau GmbH BGH Edelstahl Lippendorf GmbH 711 employees 492 employees 231 employees 148 employees RPS Siegen GmbH SRG Schrott und Recycling GmbH Siegen 45 employees BGH SL-Stahl GmbH Isernhagen 34 employees BGH Feindraht GmbH Nettetal-Leuth 49 employees BGH Polska Sp.z.o.o. Katowice 194 employees
Production sites BGH Feindraht GmbH Nettetal-Leuth Fine wire BGH Edelstahl Siegen GmbH Bars, Forgings RPS Siegen GmbH Scrap and Alloys SRG Schrott und Recycling GmbH Scrap BGH Edelstahl Lippendorf GmbH Forgings, Welded flanges BGH Edelstahl Lugau GmbH Wire, Bright bars, Pump shafts BGH Edelstahl Freital GmbH Bars, Wire rod BGH Edelstahl Polska Sp.z o.o. Flat bars
Overview production processes AOD Single drawing Multiple drawing Wet drawing Ingot casting EAF 50 t / 44 t VD/VOD VAR Rolling Billets Bars Wire Drawing coil - bar Heat treatment HCC LF ESR GFM Flat rolling mill Shot blasting Pickling E- Ofe n VIM 7 t PESR Continuous rolling mill Straightening 2 Forging machines 5 Forging presses 10 40 MN Peeling Turning Grinding Milling Drilling
Products Bars (forged / rolled) Bright bars Flat bars Billets Fine wire Wire Forgings
Excellence in all dimensions Fine wire Wire Bright bars Bars Forgings Spools dia. 0.08 1.80 mm (dia. 0.003 0.070 ) Coils dia. 0.50 2.40 mm (dia. 0.020 0.095 ) Drawn dia. 0.8 20 mm (dia. 0.030 0.790 ) Bright drawn dia. 0.8 6.0 mm (dia. 0.030 0.235 ) Annealed dia. 0.8 6.5 mm (dia. 0.030 0.260 ) Drawn dia. 1 16 mm (dia. 0.04 0.63 ) Ground dia. 1 60 mm (dia. 0.04 2.36 ) Peeled dia. 12 350 mm (dia. 0.47 13.80 ) Turned dia. max. 900 mm (dia. max. 35.50 ) Rolled dia. 14 150 mm (dia. 0.55 6.00 ) Forged dia. 30 900 mm (dia. 1.18 35.45 ) Flat rolled Width 30-250 mm (1.18 9.80 ) Thickness 5 72 mm (0.20 2.80 ) Flat forged Width 50 1800 mm Forgings dia. 90 900 mm (dia. 3.55 35.50 ) max. 30 t (~66.000 lbs) Discs dia. max. 2000 mm (dia. max. 79.00 ) Flanged shafts dia. max. 1400 mm (dia. max. 55.00 ) (2.00 70.00 ) Thickness 30 880 mm (1.18 35.00 )
Excellence in all grades 2.4952 (Alloy 80A) 2.4375 (Alloy K500) 2.4360 (Alloy 400) 2.4668 (Alloy 718) 2.4856 (Alloy 625) 2.4858 (Alloy 825) 1 % Special Alloys/ Ni-Alloys 1.2344 (H13) 1.2343 (H11) 1.2379 (D2) 1.2842 (O2) 1.3343 (M2) 7 % Tool Steel 44 % Stainless and Heat Resistant Steel 1.4021 (420) 1.4006 (410) 1.4313 (415) 1.4718 (S65007) 1.4542 (17-4PH) 1.4462 (F51) 1.4404 (316L) 1.4501 (F55) 1.4539 (904L) 1.4767 (CrAl20/5) 1.4841 (314) 48 % Engineering Steel 1.6587 (18CrNiMo7-6) 1.6580 (30CrNiMo8) 1.6582 (4340) 1.7218 (4130) 1.7225 (4140) 1.7228 (4150) 1.6932 (4330) 1.6959 (35NiCrMoV12-5) 1.8519 (31CrMoV9) 1.8550 (34CrAlNi7) Based on quantity of sales
Excellence for all Industries Wind Power / Gears Chemical Engineering Mechanical Engineering Oil & Gas Automotive Mining / Yellow Industry Power Generation
Innovation and Investments 2002 2004 2006 2008 2010 2012 2014 2016
Quick deliveries from our warehouses Fully automated high rack warehouses with 40.000 t capacity in Siegen and Freital Over 70 different steel grades and Ni-alloys in all dimensions in stock. BGH SL - your Service Partner in Northern Germany.
Excellence worldwide BGH Sales Company BGH Distribution Partner
Sales Organization Sales Division 1 Karsten Josting General distribution Drives, large engines, couplings Chemical Engineering Wind power Sales Division 2 Dr. Lutz Franke Power Generation Yellow Industry Fasteners Construction Industry Sales Division 3 Metin Duygu Forgings Metal Forming Plastic machinery Shipbuilding Printing machines Hydro power plants Sales Division 4 Olaf Küster Automotive Household appliances Furnace construction Medical Engineering Drawing / Waving mills Sales Division 5 Joachim Schreiber Oil & Gas Mechanical Engineering Arms Technology Pumps Sales Division 6 Mike Lehmkemper Tools
Quality Management All BGH plants are ISO 9001:2008 and ISO 50001:2011 (Energy Management System) certified. BGH Edelstahl Lugau plant is ISO TS 16949 certified. Approved according to national and international standards like ABS, GL, TÜV, LRS, DNV, BV, etc. Production according to ASME and NACE requirements. In addition, the BGH companies have further customized approvals. (current BGH approvals: www.bgh.de Management System )
s